Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
(All dimensions are approx and are in mm)
Stand Bannerh t t p s : / / w w w . s t a n d b a n n e r . c o . u k
835mm
306mm
3x1 Curved
1240mm
3x2 Curved
1590mm
1930mm
485mm
2540mm
2275mm
685mm
3x3 Curved
3x4 Curved3070mm
2865mm
960mm
3x4 Straight
306mm
2960mm
3435mm
3x3 Straight
306mm
2230mm
2700mm
3x2 Straight
306mm
1505mm
1970mm
3x1 Straight
306mm
770mm
1240mm
Fully magnetic , with silver anodised aluminium frame and sa ron components , Xpressis stylish and very simple to use.
features & bene ts
• S elf-locating hanging system with magnetichangers make it the simplest pop-up toassemble
• S elf-locating ‘smart’ magnetic locking arms andlow pro le mag bars
• Quality anodised aluminium nish
• Available as frame only, graphic hanging kit orfabric panel kit
• Option for graphics to be displayed on bothsides
• All front curve / D–end panels are the samesize
• D–E nd graphic panels also t the Xpress Tower
• S maller graphic s ize ‘Midi’ vers ion available
• Available in a combination of quads from 1 x 1desktop to 5 x 5 freestanding exhibition display
3 x 3 C urved
Stand Bannerh t t p s : / / w w w . s t a n d b a n n e r . c o . u k
Graphic Panel Sizes
1 Quad 2 Quad 3 Quad 4 Quad 5 Quad
Reg Height 776 1495 2225 2968 3710
Midi Height 647 1245 1850 2455 -
All measurements are in millimeters (mm)
Reg 673 807 673
Midi 550 675 673
NB - Widths are consistent regardless of how many quads high the pop-up is.*Straight systems allow + or - 1mm to allow for var iances in �oor surface.
NB - Straight systems of no more than 4 quads high are r ecommended.
Curved Widths Panel HeightsFront Panel Rear Panel D-End
Reg 733* 733* 673
Midi 605* 605* 673
Straight Widths Front Panel Rear Panel D-End
Kit: Mag B ars (for exact number seetable on back page), frame, D-E ndG raphics x 2 and Front and/or reargraphics
Take the frame, ensuring that the coloured nodes are at the top. S tand the frame on the floor (2) andopen up (3) until the locking arms click the frame securely into place (4)
1 2 3 4
Add the mag bars ontothe system for front, D-ends and if applicable,the rear.
5
E nsure that the mag barslock onto the magneticpip securely.
6
Unwrap each graphiccarefully and attach tothe system.
7
C arefully hook the tophanger onto the top nodeon each side of the quad.
8
S mooth the graphic ontothe mag bars , ensuringthat it s its flatand is aligned to thecentre line of each magbar.
9
R epeat for the D-E nd,ensuring that the fit iscorrect.
10 11 12 13
R epeat steps 8 and 9 for the rest of the graphics on theunit. This applies to front and rear graphics ifapplicable.
F inally, attach the 2nd D-E nd.
Important note:R emove all mag barsbefore collapsing theframe.
R emove the backing paperfrom the graphic hanger.
C urved G raphic panel finishing
C urved Pop-up assembly
Apply the hanger to the topins ide edge of the panelensuring that it is flush to thepanel edge.
R emove the backing paperfrom the kicker and apply itto the bottom edge of thepanel.
R emove the backing paperfrom the mag tape. Apply toboth s ides of the panel,keeping it flush to the edge.
NB D-E nd panelsdo not requirekickers .
Stand Bannerh t t p s : / / w w w . s t a n d b a n n e r . c o . u k
S mooth the graphic ontothe mag bars , ensuringthat it s its flatand is aligned to thecentre line of each magbar.
9
10 11 12
Take the frame, ensuring that the coloured nodes are at the top. S tand the frame on the floor (2) andopen up (3) until the locking arms click the frame securely into place (4)
Apply mag tape to straight panels accordingto the diagram (all dimensions are approx).
NB - If us ing graphic panels with straight hangers followthe C urved graphic panel finishing instructions .
NB - If us ing graphic panels with S traight hangers follow the assembly instructions for C urved pop-ups.
1 2 3 4
Add the mag bars ontothe system, vertically forfront and D-end panels .Then add horizontal magbars across the top andbottom of the system.
5
For Double s idedsystems fit mag bars tothe rear, again runningvertically andhorizontally across thepop-up frame.
6
E nsure that the mag barslock onto the magneticpip securely.
7
Unwrap each graphiccarefully and attach tothe system.
8
S traight G raphic panel finishing
C arefully hook the tophanger of the D-endpanels onto the top nodeof the pop-up frame.
R epeat steps 8 and 9 for the rest of the graphics on theunit. This applies to front and rear graphics ifapplicable.
Important note:R emove all mag bars beforecollapsing the frame.
S traight Pop-up assembly (horizontal mag bars)
Stand Bannerh t t p s : / / w w w . s t a n d b a n n e r . c o . u k
Pop Up® Magnetic
Individual Panel Sizes
End Panel673mm x 2230mm
Inside Curve Panel673mm x 2230mm
Outside Curve Panel808mm x 2230mm
Straight Panel733mm x 2230mm
Graphic Guide
4x3
3x3
A stand is described by the number of frame squares wide (panels) x the number of frame squares high. Standardpanel height of 2230mm increases to 2963mm for a 4-squares high frame, 3696mm for 5-squares high, and4429mm for 6-squares high. Additional stabilising is recommended for increased heights, using either weights or ourunique Frame Support Brace.
When designing for end panels, consider they wrap to the back of the frame. Up to 60% of the width of an end panelmay not be visible from directly in front of the stand and designers should remember that.
V E RY Po r t a b l e G r a p h i c D i s p l a y & E x h i b i t i o n S t a n d S y s t e m s a n d B a n n e r & L i t e r a t u r e S t a n d sp r o m o t i n g B r a n d s & C o r p o r a t i o n s w o r l d w i d e
Inside Curve with ends Straight with ends Outside Curve
2230
mm
3232mm
808mm 808mm 808mm 808mm
673mm 673mm 673mm 673mm 673mm
2230
mm
Visible Area 2565mm
mm376mm376 733mm733mm733mm
2230
mm
Visible Area 2745mm
2230
mm
2424mm
808mm 808mm 808mm
2230
mm
673mm 673mm 673mm 673mm 673mm 673mm
Visible Area 3238mm
2230
mm
673mm 733mm 733mm 733mm 733mm 673mm
Visible Area 3478mm
Stand Bannerh t t p s : / / w w w . s t a n d b a n n e r . c o . u k