Upload
doandat
View
267
Download
3
Embed Size (px)
Citation preview
Home » BMW ICOM » BMW ICOM ISID configuration manual
Our Blog
BMW ICOM ISID configurationmanual
Posted by admin in BMW ICOM , Followed with No Comments.
BMW ISID configuration manual
Firstly install the vmware workstation.
Please insert the USB Key before you start the vmware workstation. This is very
important, otherwise the software will not able to run correctly!!!!
1. Install VMware Workstation 8, run and select Virtual Network Editor.
2. Configure network exactlly as on picture. At green ellipse marked place for VMnet0
select network adapter which will be used for connection with ICOM, OPS or ENET
cable.
Recent Posts
How to use ICOM ISTA’s
Multimeter
BMW A+B+C ISID Software
Short introduction of BMW ISTA–
Part 1
BMW ICOM for sale
How to check your diagun’serial
number?
09 APR
Search
Home Hardware Technical Support Other BMW Tool Contact Us
Shopping Online
Software
3. Open ISID virtual machine. If you have Win x64 and host RAM more then 4Gb, then
you can set ISID memory size from 1536Mb to 2048Mb. ISSS can process Exx with 2048Mb
instead of 4096Mb, but will show you warnings. Don’t use other values since this
will cause failures.
4. Open VM properties and check Network Adapter set to VMnet2, close and boot.
5. When asked, select “I moved it”.
6. Wait until VM boots and ISTA icon gets active.
7. Connect ICOM using network cable to PC, then connect ICOM to car, wait about
minute or two.
8.Click right mouse button over connection icon on the right bottom VM window corner
and select “Settings…”.
9. Change Network connection type to “Bridged” then press “Ok”.
10. Connection icon will change to inactive state and after some time gets back to
active. Wait 1-2 minutes, then start ISTA via one-double left mouse button click over
ISTA-D icon in WSM interface.
← Previous Post Next Post →
13. After some time in ISID “Connection manager” list should appear your ICOM.
Select it and press “Set up connection” or “Connect”.
Then just enjoy it!!
You may also like
ICOM A+B+C Model Description
BMW ICOM ISIS ISID A+B+C
Meaning of BMW ICOM LEDS
BMW ICOM for sale
Post Tagged with BMW ICOM Manual
Leave a Reply
Your email address will not be published. Required fields are marked *
Name *
SHARE THIS ARTICLE
Email *
Website
You may use these HTML tags and attributes: <a href="" title=""> <abbr
title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del
datetime=""> <em> <i> <q cite=""> <strike> <strong>
Post CommentPost Comment
BMW ICOM A+B+C - Professinal BMW Diagnostic Tool Supplier Designed & Developed by eobdtool.com