Our Vision and Mission

8/8/2019 Our Vision and Mission

1/5

Our Vision and Mission

To become a world class engineering company in the

Automotive and Non Automotive sector. This is to be

achieved by capitalizing on our superior technology

base for the benefit of our customers, suppliers and

stakeholders.

Staff

The senior management at Amtek has a long and distinguished experience in handling large-scale automotive

manufacturing operations. It has been successful in meeting the ever-increasing demands of the global

automotive giants in terms of product quality, development, delivery and cost control while improving the

company's profitability and ensuring a consistent growth for the last nearly two decades. The senior management

at Amtek is as follows:


2/5

Arvind Dham Chairman

Santosh Singhi Finance Director

John Flintham CEO, Overseas Operations

D.S. Malik Managing Director

V.K.Pabby Managing Director

Gautam Malhotra Joint Managing Director

Aditya Malhotra Director

R L Sehgal Director

Avijit Banerjee Director

Welcome to AMTEK

Amtek is a diversified automotive component supplier in the global

auto component manufacturing and supply chain. Observing a

powerful entrepreneurial culture, the forward looking company

manufactures automotive systems, assemblies, modules and

components. Tapping into its proven capabilities, over the past 25

years, Amtek has lived upto its commitment to fulfil the rising

indigenous demand and compete in the global forum. And thus, today

has a significant presence...


3/5

Starter ring gear

A starter ring gear, sometimes called a starter ring or ring gear, is a medium carbon

steel ring with teeth that is fitted on the periphery of a flexplate orflywheelof aninternal

combustion engine, mostly forautomotive applications.

The teeth of the starter ring are driven by the smaller gear (thepinion) of the starter

motor. The primary function of the starter ring is to transfertorque from the starter motor

pinion to the flywheel or flexplate to rotate the engine to begin the cycle.

The starter ring gear is most commonly made by forming a length of square or

rectangular steel bar into a circle and welding the ends together. There then follow

variousheat-treatmentlike normalising and tempering and machining operations,

including the machining of the teeth and finally a heat-treatment operation. The teeth of

the starter ring need to be hardened in order to increase their strength and resist wear. The

normal hardness at pitch circle diameter is 45-55 HRC. The hardness at the root of the

teeth is about 40 HRC and at 2 mm below root the hardness is 35 Hrc max. The body of

the ring is generally left untreated.

Engines with manual transmission usually have a heavy flywheel, typically 5 to 10kg of

cast iron, with the starter ring gear shrunk onto the outside. This is done by heating the

ring to around 200 C to expand the ring which is then placed onto the flywheel, hold the

ring gear with hydraulic pressure of 5 kg/cm2 for 1 min and allowed to cool the ring

gear.The starter ring is thereby firmly attached to the flywheel.
http://en.wikipedia.org/wiki/Gearhttp://en.wikipedia.org/wiki/Steelhttp://en.wikipedia.org/wiki/Flywheelhttp://en.wikipedia.org/wiki/Flywheelhttp://en.wikipedia.org/wiki/Internal_combustion_enginehttp://en.wikipedia.org/wiki/Internal_combustion_enginehttp://en.wikipedia.org/wiki/Internal_combustion_enginehttp://en.wikipedia.org/wiki/Automotivehttp://en.wikipedia.org/wiki/Pinionhttp://en.wikipedia.org/wiki/Pinionhttp://en.wikipedia.org/wiki/Starter_motorhttp://en.wikipedia.org/wiki/Starter_motorhttp://en.wikipedia.org/wiki/Torquehttp://en.wikipedia.org/wiki/Heat-treatmenthttp://en.wikipedia.org/wiki/Heat-treatmenthttp://en.wikipedia.org/wiki/Transmission_(mechanics)http://en.wikipedia.org/wiki/Kilogramhttp://en.wikipedia.org/wiki/Kilogramhttp://en.wikipedia.org/wiki/Cast_ironhttp://en.wikipedia.org/wiki/Celsiushttp://en.wikipedia.org/wiki/Gearhttp://en.wikipedia.org/wiki/Steelhttp://en.wikipedia.org/wiki/Flywheelhttp://en.wikipedia.org/wiki/Internal_combustion_enginehttp://en.wikipedia.org/wiki/Internal_combustion_enginehttp://en.wikipedia.org/wiki/Automotivehttp://en.wikipedia.org/wiki/Pinionhttp://en.wikipedia.org/wiki/Starter_motorhttp://en.wikipedia.org/wiki/Starter_motorhttp://en.wikipedia.org/wiki/Torquehttp://en.wikipedia.org/wiki/Heat-treatmenthttp://en.wikipedia.org/wiki/Transmission_(mechanics)http://en.wikipedia.org/wiki/Kilogramhttp://en.wikipedia.org/wiki/Cast_ironhttp://en.wikipedia.org/wiki/Celsius


4/5

Engines with automatic transmissions instead have a pressed steel plate with the starter

ring gear usually weldedonto the outside of the plate.

Retrieved from "http://en.wikipedia.org/wiki/Starter_ring_gear"

INVESTOR RELATION

Amtek Auto (NSE: AMTEKAUTO, BSE: 520077) is

headquartered in New Delhi and is one of the largest integrated

automotive component manufacturers in India with a strong

global presence. The Company has world class facilities in India,

Europe and North America. Amtek Auto has significant expertisein forging, grey and ductile iron casting, gravity and high-

pressure aluminum die casting and machining and sub-

assembly. The Company also manufactures components for

non-auto sectors such as the railways, specialty vehicles,

aerospace, agricultural and heavy earth moving equipment.

The objective of Amtek Auto Investor Relations is to ensure

continuous and open communication with all financial market

participants.
http://en.wikipedia.org/wiki/Automatic_transmissionhttp://en.wikipedia.org/wiki/Weldinghttp://en.wikipedia.org/wiki/Weldinghttp://en.wikipedia.org/wiki/Starter_ring_gearhttp://en.wikipedia.org/wiki/Automatic_transmissionhttp://en.wikipedia.org/wiki/Weldinghttp://en.wikipedia.org/wiki/Starter_ring_gear


5/5

Punctuated with laurels & awards, our commitment towards quality and best customer service always got due

global recognitions; ever inspiring us to effect solutions that are far closer to top-most standards!

Documents

Our Vision and Mission