Outlet and Switch Boxes Material, Finish, Knockouts, Fire · PDF file · 2017-07-044” Round Ceiling Fan Box With and Without Support Bar Hanger Depth (Inches) Clamp Type Bracket,

NEC/CEC: Listed for Ordinary Locations

Outlet and Switch BoxesMaterial, Finish, Knockouts, Fire-Rated Assemblies, Compliances, Groundskeeper Raised Ground Boss

Material/Finish• AISI/SAE1008• Pre-galvanizedG60,183.09g/sqm(0.60oz/sqft)• Thickness:0.0625”minimum

Concentric and Eccentric Knockouts• Boxeswithconcentricoreccentricknockoutsaresuitablefor

bonding without any additional bonding means where used in circuits above or below 250 V. Unless otherwise noted all concentricoreccentricknockoutsare1/2”–3/4”combinations.

Use in Fire-Rated Assemblies• Singleanddoublegangmetallicoutletandswitchboxesare

acceptableforuseintwo-hourfireratedwalls.Foradditionalinformation refer to the UL guide card information for metallic outlet boxes, QCIT.

Groundskeeper Raised Ground Boss • Groundskeeperraisedgroundfeatureonbossinsidebox

providesoneortwo#10-32tappedhole,allowinga3/8”longgreen ground screw to be threaded into box without contacting mountingsurface.Otherboxesprovidedwithflatgroundtappedhole, except Plenum Boxes.

NEC/CEC Compliances and Certifications• ULStandard:514A,514B,514D• ULListed:E2527,E14817• NEMA:FB-1,OS-1

commercial and industrial fittings: outlet Boxes, switch Boxes and covers

Visit our website at www.emerson.com or contact us at (800) 621-1506. © June 2017

445

Outlet and Switch BoxesStyles of Clamps and Brackets


Clamps

CL-9For nonmetallic cable CL-20

For nonmetallic cableCL-24

For nonmetallic cable

CL-26For nonmetallic cable

CL-13For armored cable (AC), metal clad cable

(MCI, MCI-A, MCC) and flexible metal conduit

CL-25For armored cable andflexible metal conduit

Brackets

JB Plain NL Stud NL

Snap-in metal stud MSC-OBNOutlet box metal stud clip

for individual sale

892LOX BOX™ switch box supports

for individual sale

Products available as installed parts only. Products available as individual parts. Order by product catalog number.


446

comm

erci

al a

nd in

dust

rial

fitt

ings

: out

let

Boxe

s, s

witc

h Bo

xes

and

cove

rs


Outlet and Switch BoxesStyles of Clamps and Brackets

Brackets

Plain, Offset Side Combination Barbed-Hook, Vertical Plain, Vertical Vertical with Stud

Plain, Vertical Plain, Vertical Angle Offset, Vertical Plain, Vertical

Products available as installed parts only.



447


Outlet and Switch Boxes4” Round Ceiling Fan Box With and Without Support Bar Hanger

Depth (Inches)

Clamp Type

Bracket, Offset or Expansion

Knockouts (Inches) dm3 (in3)

Catalog Number

4" Round - without Support Bar Hangers

1/2 — — (2) 1/2 — FFS-4CL


448

comm

erci

al a

nd in

dust

rial

fitt

ings

: out

let

Boxe

s, s

witc

h Bo

xes

and

cove

rs

Depth (Inches)

Clamp Type

Bracket, Offset or Expansion

Knockouts (Inches) dm3 (in3)

Catalog Number

4" Octagon - without Support Bar Hangers

1-1/2 AC/MC, NM – (3) 1/2

0.25 (15.5)

FFS-561L

2-1/8 AC/MC, NM – (3) 1/2

0.35 (21.5)

FFS-561LD

2-1/8 AC/MC, NM FB,1/2” (2) 1/2

0.35 (21.5)

FFS-561LD-VB-NW

4" Octagon - with Support Bar Hangers

1/2 – NBH, 16”to24" (2) 1/2

0.095 (5.8)

FFS-561L-NBH

2-1/8 AC/MC, NM

NBH, 16”to24” (3) 1/2

0.35 (21.5)

FFS-561LD-NBH

2-1/8 AC/MC, NM

OBH, 16”to24" (3) 1/2

0.35 (21.5)

FFS-561LD-OBH

NBH is for new construction. Complies with NEC 442.18 for up to 16 kg (35 lbs) of ceiling fan load or 32 kg (70 lbs) of fixture load.

Outlet and Switch Boxes4” Octagon Ceiling Fan Boxes With and Without Support Bar Hangers




449


Outlet and Switch BoxesRound Boxes and Covers

Depth (Inches)

Wiring CubicInch Capacity

Clamp Type

Knockout DescriptionWeight per 100

kg (lb)Catalog NumberSides Ends Bottom

3-1/4" Round Boxes - with Nonmetallic Sheathed Cable Clamps

1/2 4.5 CL-9 — — (3)1/2”(4)21/32”

13.15 (29.0)

510LC(36115)

1/2" Deep

1/2 4.5 — — — (3)1/2”(4)21/32”

21.77 (48.0) 510L

1/2" Deep

3-1/4" Round Covers - For 3-1/4" Octagon and Round Boxes

Flat 0.0 — Blank 7.71 (17.0)

8301A(24C1)

Flat 0.0 — 1/2”KO 7.71 (17.0)

8320(24C6)

4" Round Box - with Knockouts in Bottom

1/2 6.0 — — — (5)1/2”16.33 (36.0) 4CL

(56111)

1/2" Deep

Not UL Listed. 2-3/4” Cover Hole Centerline. 3-1/2” Cover Hole Centerline.


450

comm

erci

al a

nd in

dust

rial

fitt

ings

: out

let

Boxe

s, s

witc

h Bo

xes

and

cove

rs


Outlet and Switch Boxes3-1/4" Octagon Boxes and Extension Ring

Depth (Inches)


Clamp Type


kg (lb)Catalog Number

(Universal No.)Sides Ends Bottom

3-1/4" Octagon Boxes - with Knockouts

1-1/2 10.5 — (4)1/2” — (1)1/2” 17.24 (38.0)

30-1/2(24151-1/2)

30-1/2 1-1/2" Deep

3-1/4" Octagon Boxes - with Nonmetallic Sheathed Cable Clamps

1-1/2 11.9 CL-26 (2)1/2” (4)21/32” (1)1/2” 21.77 (48.0)

560L(24151-N)

560L1-1/2" Deep;

Two nail holes each end

1-1/2 11.9 CL-26 (2)1/2” (4)21/32” (1)1/2” 23.13 (51.0)

560LXE(24151-NE)

560LXE1-1/2" Deep;Plaster Ears

1-1/2 11.9 CL-26 (1)1/2” (4)21/32” (1)1/2” 25.40 (56.0)

560LVB(24151NF)

560LVB1-1/2" Deep; Plain Vertical

Bracket; Set back 5/8"

3-1/4" Octagon Box Extension Ring - with Knockouts

1-1/2 10.5—

(4)1/2” — — 15.42 (34.0)

30E-1/2(25151-1/2)

30E-1/21-1/2" Deep

2-3/4” Cover Hole Centerline.



451


Outlet and Switch Boxes4” Octagon BoxesWith Knockouts

Depth (Inches)

Wiring Cubic Inch Capacity




1-1/2 15.5 (4)1/2” — (5)1/2” 23.59 (52.0)

4O-1/2(54151-1/2)

1-1/2" Deep

1-1/2 15.5 (4)3/4” — (3)1/2” (2)3/4”

23.59 (52.0)

4O-3/4(54151-3/4)

1-1/2" Deep

1-1/2 15.5 (2)1/2” (2)3/4” — (3)1/2”

(2)3/4”23.59 (52.0)

4O-SPL(54151SPL)

1-1/2" Deep

1-1/2 15.5 (4)1/2” — (5)1/2” 30.84 (68.0)

4OJB-1/2(54151J-1/2)

1-1/2" Deep;JB Bracket set flush

Gauging notches 3/8" & 1/2"

2-1/8 21.5 (4)1/2” — (5)1/2” 29.94 (66.0)

4OD-1/2(54171-1/2)

2-1/8" Deep

2-1/8 21.5 (4)3/4” — (3)1/2” (2)3/4”

29.94 (66.0)

4OD-3/4(54171-3/4)

2-1/8" Deep



452

comm

erci

al a

nd in

dust

rial

fitt

ings

: out

let

Boxe

s, s

witc

h Bo

xes

and

cove

rs


Outlet and Switch Boxes4” Octagon BoxesWith Knockouts

Depth (Inches)





2-1/8 21.5 (2)1/2” (2)3/4” — (3)1/2”

(2)3/4”30.84 (68.0)

4OD-SPL(54171SPL)

2-1/8" Deep

1-1/2 15.5 (3)1/2” — (5)1/2” 28.12 (62.0)

4OVB-1/2(54151F-1/2)

1-1/2" Deep; Vertical bracket with stud;Set back 5/8"

1-1/2 15.5 (4)1/2” — (4)1/2” 41.73 (92.0) SX115-4O-1/2

1-1/2" Deep; 40-1/2 box on SX115;Stud bar hanger; Adjusts from 11-1/2" to

18-1/2"

3-1/2” Cover Hole Centerline. Not fan box rated.



453


Outlet and Switch Boxes4” Octagon BoxesWith Nonmetallic Sheathed Cable Clamps

Depth (Inches)


ClampType




1-1/2 15.5 CL-26 (2)1/2” (4)21/32” (1)1/2” 25.85 (57.0)

561L(54151)

1-1/2" Deep

1-1/2 15.5 CL-26 (2)1/2” (4)21/32” (1)1/2” 25.85 (57.0)

561N(54151N)

1-1/2" Deep;Four nail holes each end

1-1/2 15.5 CL-26 (2)1/2” (4)21/32” (1)1/2” 33.57 (74.0)

561LJB(54151JN)

1-1/2" Deep;JB Bracket set flush;

Gauging notches 3/8" & 1/2"

1-1/2 15.5 CL-26 (2)1/2” (4)21/32” (1)1/2” 29.94 (66.0)

561LVB(54151FN)

1-1/2" Deep;Bracket set back 5/8"

1-1/2 15.5 CL-26 (2)1/2” (4)21/32” (1)1/2” 28.12 (62.0)

561LXE(54151NE)

1-1/2" Deep;Plaster ears

2-1/8 21.5 CL-26 (2)1/2” (4)21/32” (1)1/2” 31.75 (70.0)

561LD(54171N)

2-1/8" Deep



454

comm

erci

al a

nd in

dust

rial

fitt

ings

: out

let

Boxe

s, s

witc

h Bo

xes

and

cove

rs


Outlet and Switch Boxes4” Octagon BoxesWith Nonmetallic Sheathed Cable Clamps

Depth(Inches)


ClampType




2-1/8 21.5 CL-26 (2)1/2” (4)21/32” (1) 1/2”

38.10 (84.0)

561LDJB(54171JN)

2-1/8" Deep; JB Bracket set back 1”;

Gauging notches set back 1-3/8” & 1-1/2”

1-1/2 15.5 CL-26 (2)1/2” (4)21/32” — 43.54 (96.0) SX18-561L

1-1/2" Deep; 561L box on SX18 clip bar hanger; Adjusts from 11-1/2” to 18-1/2”

1-1/2 15.5 CL-26 (2)1/2” (4)21/32” — 44.91 (99.0) SX115-561L

1-1/2" Deep; 561L box on SX115 stud bar hanger;

Adjusts from 11-1/2” to 18-1/2”

3-1/2” Cover Hole Centerline. Not UL Listed. Not fan box rated.



455


Outlet and Switch Boxes4” Octagon BoxesWith Armored Cable Clamps

Depth(Inches)


ClampType




1-1/2 15.5 CL-25 (2)1/2” (4)21/32” (4)21/32” (1)1/2” 27.67

(61.0)551L(54151X)

1-1/2" DeepTwo nail holes each end

1-1/2 15.5 CL-25 (2)1/2” (4)21/32” (4)21/32” (1)1/2” 33.57

(74.0) 551LJB

1-1/2" DeepJB Bracket set flush;

Gauging Notches 3/8” & 1/2”

2-1/8 21.5 CL-25 (2)1/2”(4)21/32” (4)21/32” (1)1/2” 38.10

(84.0)551LDJB

2-1/8” DeepJB Bracket set back 1”;

Gauging Notches 3/8” & 1/2”

1-1/2 15.5 CL-25 (2)1/2” (4)21/32” (4)21/32” —

46.72 (103.0) SX115-551L

1-1/2” Deep551L box on SX115 stud bar hanger;

Adjusts from 11-1/2” to 18-1/2”

3-1/2” Cover Hole Centerline. Not fan box rated.


456

comm

erci

al a

nd in

dust

rial

fitt

ings

: out

let

Boxe

s, s

witc

h Bo

xes

and

cove

rs


Outlet and Switch Boxes4” Octagon Box Extension RingsWith Knockouts

Depth(Inches)


Clamp Type




1-1/2 15.5 — (4)1/2” — — 16.78 (37.0)

4OE-1/2(551511/2)

1-1/2" Deep

1-1/2 15.5 — (2)1/2” (2)3/4” — — 17.69

(39.0)4OE-3/4(551513/4)

1-1/2" Deep

1-1/2 15.5 — (2)1/2” — — 44.91 (99.0)

4OE-SPL(55151-SPL)

1-1/2" Deep




457


Outlet and Switch Boxes4” Octagon and Round CoversFor 4" Octagon and Round Boxes

Depth (Inches)


Knockout Description

Weight per 100kg (lb)

Catalog Number (Universal No.)

1/2”Raised 3.5 Ears2-3/4”Cto C

8.16 (18.0)

8409A(54C31/2)

1/2" Raised

5/8”Raised 4.5 Ears2-3/4”Cto C

9.07 (20.0)

8409(54C33/4)

5/8" Raised

Flat 3.5 Blank 11.79 (26.0)

8403(5401)

Flat

Flat 0.0 1/2”Knockout 11.79 (26.0)

8413(54C6)

Flat

Flat 0.0One Single Flush

Receptacle 1-13/32”D

9.53 (21.0)

8419LR(54-S)

Flat

Flat 0.0 Duplex Receptacle

8.62 (19.0)

8420LR(54-D)

Flat

Beveled (White) 0.0 Blank 11.79

(26.0) WCRB4W

Beveled



458

comm

erci

al a

nd in

dust

rial

fitt

ings

: out

let

Boxe

s, s

witc

h Bo

xes

and

cove

rs


Outlet and Switch Boxes4” Square Boxes - 1-1/2" DeepWith Knockouts

Depth(Inches)



kg (lb)Catalog Number(Universal No.)Sides Ends Bottom

1-1/4 18.0 (10)1/2” — (5)1/2”

27.67 (61.0)

4SL-1/2(52141-1/2)

1-1/4" Deep, Drawn

1-1/2 21.0 (12)1/2” — (4)1/2” 33.11 (73.0)

4S-1/2(52151-1/2)

1-1/2 21.0 (12)1/2” — (4)1/2”

33.11 (73.0) 4S-1/2RD

1-1/2" Deep, Welded

1-1/2 21.0 (12)1/2” — (5)1/2” 33.11 (73.0)

4S1/2-DR(52151-1/2)

1-1/2" Deep, Drawn

1-1/2 21.0 (8)3/4” — (2)1/2” (2)3/4”

30.39 (67.0)

4S-3/4(52151-3/4)

1-1/2" Deep, Welded

1-1/2 21.0 (8)3/4” — (2)1/2” (2)3/4”

30.39 (67.0)

4S3/4-DR(52151-3/4)

1-1/2" Deep, Drawn

For fire alarm circuits. Red powder coat finish.



459

Depth(Inches)



kg (lb)Catalog Number(Universal No.)Sides Ends Bottom

1-1/2 21.0 (8)1/2” (4)EccentricKO — (2)1/2”

(2)EccentricKO32.66 (72.0) 4SEK

1-1/2” Deep, Welded

With Green

Ground Wire

1-1/2 21.0 (8)1/2” (4)EccentricKO — (2)1/2”

(2)EccentricKO

32.66 (72.0) 4SEKP


1-1/2 21.0 (8)1/2” (4)3/4”

— (2)1/2” (2)3/4”

33.11 (73.0)

4S-SPL(52151-SPL)


1-1/2 21.0 (8)1/2” (4)3/4”

— (2)1/2” (2)3/4”

33.11 (73.0)

4S-SPL-DR(52151-SPL)

Red Box

Option 1-1/2 21.0 (8)1/2” (4)3/4”

— (3)1/2” (2)3/4”

33.11 (73.0)

4S-SPL-DRRD

1-1/2” Deep, Drawn

With Green

Ground Wire

1-1/2 21.0 (8)1/2” (4)3/4” — (3)1/2”

(2)1/2”

33.11 (73.0) 4S-SPL-DRP

1-1/2” Deep, Drawn

1-1/2 21.0 (8)1/2” (4)3/4” — (3)1/2”

(2)3/4”

31.75 (70.0) 4SP

Plenum Box; 1-1/2” Deep, Drawn; Without any holes and with resetknockouts (Screws supplied with

cover, Catalog number 8465P)

Provided with green ground screw and 10” long No. 12 AWG solid, insulated green ground wire. For fire alarm circuits. Red powder coat finish.




460

comm

erci

al a

nd in

dust

rial

fitt

ings

: out

let

Boxe

s, s

witc

h Bo

xes

and

cove

rs



Depth(Inches)


Knockout DescriptionWeight per 100 kg (lb)

Catalog Number(Universal No.)Sides Ends Bottom

1-1/2 21.0 (6)3/4” — (2)1/2” (2)3/4”

36.74 (81.0)

4SVB3/4PL(52151-V-3/4)

1-1/2” Deep, Welded;Plain vertical bracket

1-1/2 21.0(6)1/2”

(3) Eccentric KO

—(2)1/2”

(2) Eccentric KO

36.74 (81.0) 4SVB-EK-PL

Red Box

Option1-1/2 21.0

(6)1/2” (3) Eccentric

KO—

(2)1/2” (2) Eccentric

KO

36.74 (81.0) 4SVB-EK-PLRD

1-1/2” Deep, Welded;Plain vertical bracket

1-1/2 21.0(6)1/2”

(3) Eccentric KO

—(2)1/2”

(2) Eccentric KO

40.37 (89.0) 4SOB-EK

1-1/2” Deep, Welded; 1-3/8” offset vertical bracket

1-1/2 21.0(6)1/2”

(3) Eccentric KO

—(2)1/2”

(2) Eccentric KO

37.19 (82.0) 4SAB-EK

1-1/2” Deep, Welded;Vertical bracket with

barbed hooks

1-1/2 21.0(6)1/2”

(3) Eccentric KO

—(2)1/2”

(2) Eccentric KO

35.38 (78.0)

4SB-EK(52151-B-1/2)

1-1/2” Deep, Welded; Stud NL bracket set flush

with front of box

For fire alarm circuits. Red powder coat finish.



461

Documents

Outlet and Switch Boxes Material, Finish, Knockouts, Fire · PDF file · 2017-07-044” Round Ceiling Fan Box With and Without Support Bar Hanger Depth (Inches) Clamp Type Bracket,