Overview• N.Y.E. is part of an international network of

companies, laboratories and enthusiasts in the field of alternative energy and fuel additives.

• Our main concerns are to optimize the utilization of the current fuel sources to decrease maintenance and to help protect the environment and public health.

• All our products are specifically designed for the Middle Eastern markets. It is manufactured under strict quality controlled conditions.

• As it is widely known, the characteristics and properties of fuels sold in the Middle East are very different from those found in developed countries.

• 5201 additives were made available to the public in 2007. Prior to that date, heavy testing and evaluation in various countries were taking place.

What are the “5201” Additives?

They are specifically designed for fuels found in the Middle East

They are not harmful to the engine or to the fuel system

They work on two aspects:

Improve the quality of the fuel to make it similar to Western fuels

Improve the efficiency of the combustion process

Provide many benefits that cannot be provided by a single additive

Problems TackledLess Maintenance

• Trouble free injectors and fuel lines, longer filters lifeHot Weather

• Lubricants and Octane/Cetane improvers help when the fuel is hot and thinHorsepower

• Increases by >8%Less Smoke

• More than 70% of the smoke will disappear keeping the surrounding air cleanerBetter Starting and Better Response

• under all conditionsLower Exhaust Temperature

• Means better combustion, less heat and longer engine lifeLower Emissions and less smells

• This is due to the improved combustionCleans and Protects

• Cleans deposits in the fuel system and leaves no residue that can clog injectorsMinimizes Impurities

• By breaking them down to manageable particles that can be combustedReduces Wear and Stabilizes Fuel

• By adding the necessary additives that Western countries put in fuelsRemoves Water

• By making them as a foam and pushing them out of the system

General Benefits

Cleaner Fuel Lines

Cleaner Injectors

Water Removal

Less Smoke

Lower Emissions

Better Combustion

Safe and Reliable

Less Consumption

This can be FOUR folds:1. Less Maintenance: in the following areas (but not limited to):

• Filters last longer• Fuel lines last longer• No need for cleaning injectors • Optimum efficiency in combustion• Less smoke and lower emissions• Less wasted heat

2. Reducing Downtime related to fuel problems found in the Middle East

3. Less Consumption4. Usage of lower quality fuel can give the same performance as using

high quality one (like Western fuels)

Economical Benefits

Less Consumption: means less emissions means less pollution

Minimizing Smoke: the particles in the soot are one of the main reasons in many cancerous diseases

Better Combustion: leads to lower emissions by up to 45%

Environmental Benefits

Usage

• The mixing ratio of the additive is 0.2% or 2 per thousand.

Mixing takes place within 10 minutes automatically without any mechanism or tool

For best results, the additive should be mixed in the proper ratios with a margin of error of ± 5%. Continuous usage on

regular basis ensures all the benefits at all times

How Does it Work?

5201 modifies the combustion process to make it more efficient. It makes the fuel particles more homogeneous so that the fuel-air ratio will be optimized leading to a more efficient combustion. The figure below shows the process of ignition and fuel explosion in the cylinder. The figure to the left is taken without the additive while the one to the right is with the additive. Notice the faster propagation of the explosion.

How Does it Work? (Cont’d)

5201 decreases surface tension among fuel molecules

5201 decreases the size of the fuel molecules

5201 works like a detergent to clean the fuel lines

5201 lubricates the fuel lines to extend its operational lives

5201 emulsifies water present in the fuel

Composition

5201

Hydrocarbons

IPA

Special Mineral Oils

Ketones

5201 Additive Formula

All these ingredients are completely compatible with the fuel systems and fuel found in the Middle Eastern markets

Physical Data / Storage

Melting Point -85 °C

Boiling point >120 °C

Flash point 65 °C

Specific Gravity 0.84 – 0.88

Solubility 100% soluble

Stability Highly stable

5201 D comes in 20 liters special plastic containers. Larger containers can be made available. Store in proper shady space at ambient temperature (less than 40°C).

There is no shelf-life for these products

Tests (photos below are the property of some clients)

Before After

Combustion chambers, Pistons, Valves, etc… are always clean if

5201 is used

The injectors maybe dirty with gum deposits. Using 5201 will

make them clean again

With 5201, you may notice heavy smoke in the beginning of usage

due to the cleaning process that is taking place. Afterwards, smoke

decreases dramatically

ConclusionIn brief, the 5201 additives can solve ALL your fuel problems.

Consumption will be decreased,

Maintenance will be minimal and,

Your engine life will be maximized.

Our GUARANTEE to all our clients:

If you try our product and you are not satisfied with this additive, we

will pay back all the additive costs + 20% compensation.

Contacts

OFFICE: 3rd Floor – Kaline Center – Sin El Fil – Lebanon

PLANT: Nahr El Mot

PHONE: +961 1 482435/6+961 3 227426 (Elias Aoun – General Manager)+961 3 883454 (Salah Maalouf – Sales Representative)

MAIL: 50440 – Furn El Chebbak – Baabda 10112040 – Lebanon

EMAIL: elias@cdpinfo.org