Upload
qais-raza
View
180
Download
15
Embed Size (px)
Citation preview
FSEC(OVP) wiring guide line2 core 16 XCMK cable should be used to connect OVP
OVP
V rtn Vin
V rtn V rtn V in PE PE PE V in
XCMK Brown (+ve)
XCMK Blue (-ve)
XCMK Shield for grounding
2M RFPower Cable Black (+ve)
2M RFPower Cable
Blue (-ve)
NOT USED NOT USED
Vrtn : +ve V in : -vePE: Earth
Main Grounding connected to Tower leg with 16mm2 cable
FSEC (OVP) wiring
3. Connect the grounding cable (GND).
Route the grounding cable from the bottom right corner of the FSEC box to the groundingpoint on the plinth.
4. Cut the one end of DC RF power cable the connector, strip it as
necessary
Connect the black and blue wires and connect the wires as shown in
figure.
5. Connect the other end of the DC cable to the RF Module.