Owner’s ManualHavis Docking Station For theHavis iPad Protective Case

DS-APP-100-SERIES_OMN_9-17

www.havis.com1-800-524-9900

DS-APP-102DS-APP-112

PKG-DS-APP-102PKG-DS-APP-112

PKG-DS-APP-132PKG-DS-APP-142

DS-APP-100 Series

Related Products

Havis offers a wide variety of accessory products specifically for use with the DS-APP-100 Series Docking Station. For more information or to order, please visit www.havis.com.

DS-DA-218Desktop Stand for Tablet Docking StationsDurable stand for mounting tablet Docking Stationsfor use in the home or office.

DS-DA-700 SeriesApple iPad Protective CaseProtective Cases for Havis DS-APP-102 & DS-APP-112will accommodate Apple iPad 2, 3, 4, 5, Air, Air 2, & Pro 9.7

DS-DA-503Replacement KeysSet of two (2) replacement keys for DS-APP-100Series Docking Stations.

Havis, Inc.75 Jacksonville Road

Warminster, PA 18974www.havis.com 1-800-524-9900

www.havis.com • 1-800-524-9900

DS-APP-102DS-APP-112

PKG-DS-APP-102PKG-DS-APP-112

PKG-DS-APP-132 PKG-DS-APP-142

Before Beginning (Original Instructions)

2 11

Havis is pleased to provide this Owner’s Manual to aid in the properinstallation and use of the DS-APP-100 Series Docking Station forthe Havis iPad Protective Case.

For questions regarding the set-up of your DS-APP-100 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.

Use the supplied power cable to charge your iPad once its securely docked.Plug barrel connector into the back of the Docking Station, and the cigarette lighter adaptor into the vehicle power source.

This Owner’s Manual applies to the following Part Numbers:

• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE.

• DO NOT USE COMPUTER WHILE DRIVING.

Supplying Power to iPad

• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

To Vehicle Power Source

To Docking Station

www.havis.com • 1-800-524-9900

Table of Contents

10 3

SpecificationsPort Replication CapabilityParts IncludedInstallationCable ManagementOperation - DockingOperation - UndockingSupplying Power to iPad

3446891011

Specifications

Power Supply Input 12.0 V DC-In

Dimensions 10.8” ( 27.5 cm) H x 6.9” ( 17.6 cm ) W x 3.1” ( 8.0 cm ) D

Weight 1.6 lbs ( 0.68 kg )

Operating Environment 0° C to 35° C ( 32° F to 95°F )

Storage Environment -40° C to 85° C ( -40° F to 185° F )

• Do not place metal objects or containers of liquid on top of the Docking Station• If a malfunction occurs, immediately unplug the Power Supply and remove the tablet• Do not store the Docking Station where water, moisture, steam, dust, etc. are present• Do not connect cables into ports other than what they are specified for• Do not leave the Docking Station in a high temperature environment (greater than 85°C, 185°F) for a long period of time

Precautions

3) Pivot tablet so the top aligns with the Locator Pin at the top of the Docking Station. Lower the Latch Handle to secure tablet in place.

4) For theft deterrence, secure tablet by locking Docking Station with supplied key (Hardware Kit Item 2).

Operation - Docking (continued)

Operation - Undocking

1) If previously locked, unlock Docking Station using supplied key. 2) While holding tablet with one hand, lift the Latch Handle on the top of Docking Station.

3) Once unlatched grab both sides of tablet, rock the top forward and carefully lift out of Docking Station, top end first.

Latch Tab willengage in front of

Protective Case

EC DECLARATION OF CONFORMITY in accordance with EN 45014Manufacturers Name: Havis, Inc.Manufacturers Address: 75 Jacksonville Road, Warminster, PA 18974 USADeclares under our sole responsibility that the product: Product name: Havis Docking Station For Havis iPad Protective Case Model: DS-APP-1XX, where ‘X’ may be any alphanumeric character and which describes product options. May be followed by any alphanumeric characters which describe product options. Product Options: This declaration covers all options of the above product which bear the CE Marking.

Is in conformity with the following standards or other normative documents: EMC Directive 2004/108/EC: EN 55022:2010, Class B, Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

EN 55024:2010, Information technology equipment - Immunity characteristics - Limits and methods of measurement

Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)

BS EN 50498:2010: Section 7, after market electronic equipment in vehicles.

Supplementary Information:The product herewith complies with the requirements of the EMC Directive 2004/108/EC. This product requires theuse of the provided e-Marked automotive power supply when used within vehicles.

Warminster, PA, USA March 14, 2014 Bruce Jonik, Director of Engineering , Havis, Inc.

FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modifications to the model DS-APP-1XX not expressly approved by Havis, Inc. could void the user's authority to operate this equipment.

www.havis.com • 1-800-524-99004 9

1. Zip Ties (5) 2. Keys (2) 3. 1/4”-20 x 5/8” long Button Head Screws (5) 4. M4 x 0.7 x 12mm long Pan Head Screws (5) 5. Washers, M4 (5) 6. Lock Washers, M4 (5) Extra hardware (screws) providedTools required for installation: • 5/32” Hex Drive (For attaching Docking Station to Mount with Button Head 1/4”-20 Screws)

• #2 Philips Screwdriver (For attaching Docking Station to VESA 75mm hole pattern equipment with Pan Head M4 x 0.7 x 12mm Screws)

Hardware Kit

Port Replication Capability

Parts Included

TOP of Docking Station

BOTTOMof Docking Station

LEDPower Indicator

Operation - Docking

1) Ensure Docking Station is unlatched by lifting Latch Handle.

2) Hold tablet in landscape orientation, with bottom angled toward Docking Station. Lower tablet into the bottom of the Docking Station.

DO NOT FORCE TABLET ONTO DOCKING STATION. IF THERE IS RESISTANCE,CHECK ALIGNMENT OF TABLET ON DOCKING STATION.

Alignment Sockets Back Side of tablet in Protective Case

Alignment Posts DS-APP-100 Series Docking Station

NOTE: Ensure a proper connection by aligning the tablet’sAlignment Sockets with the Docking Station’s Alignment Posts

Power Input

PWR

DC IN 12V

www.havis.com • 1-800-524-99008 5

Cable Management

1) Tip the Docking Station to a position that is comfortable to work with.

2) Install power cable as necessary for your computing needs.

3) Use Zip Tie (Hardware Kit Item 1) to strain relieve cable. Use a Strain Relief Point to anchor the cable. If desired for routing purposes, additional Strain Relief Points on each side of Docking Station may be used.

4) Create a service loop with the cable to ensure that no tension is on the connector and to enable intended motion.

5) Tie off the cable onto a stationary part of the mounting system.

Collect cable and secureto the mounting system.

(Note: Mounting system not included)

This loop must be large enough to allow full range of expected rotation and extension without stressing connection.

Docking Station

Parts Included

FRONTAll Models

Barrel Lock

Docking Connector

Latch Handle

Latch TabLocator Pin

BACK

Strain Relief

Ports

Mounting Hole (x4)

www.havis.com • 1-800-524-99006 7

Installation (continued)

OPTION B INSTALLATION:A) Align the Rigid Mount Bracket holes with the VESA 75mm holes on the mounting device. Using the (4) M4 Pan Head Screws (Hardware Item 4), (4) Washers, M4 (Hardware Item 5) and (4) Lock Washers, M4 (Hardware Item 6) secure the Rigid Mount Bracket to the mounting device from the rear. Torque screws to 20 in-lbs (2.3Nm) ± 10%.

OPTION C INSTALLATION:A) Using (2) fasteners appropriate for the mounting surface (not included), secure the Rigid Mount Bracket through the access holes via the front of Docking Station.

DockingStation

M4 x 0.7x12mmPan HeadScrews

Mounting Device(VESA 75 mm)

Lock Washer, M4Washer, M4

Mounting Surfaceappropriate fasteners

Access to Rigid Mount Bracket via front of

Docking Station

Mounting Surfacehole pattern

(For reference only)

3.0”

Installation

1) Identify your required mounting configuration and select the appropriate fasteners from the Hardware Kit. OPTION A: Havis vehicle motion/mounting equipment. Use Hardware Kit Item 3 (1/4-20x5/8” long Button Head Screws) OPTION B: Motion/mounting device with VESA 75mm hole pattern. Use Hardware Kit Item 4 (M4 x 0.7x12mm long Pan Head Screw), Hardware Kit Item 5 (Washers, M4), and Hardware Kit Item 6 (Lock Washers, M4) OPTION C: Other mounting surfaces without rear access. Hardware not supplied, use appropriate hardware for preferred mounting surface.

OPTION A INSTALLATION:A) Using a 5/32” Hex Drive (not provided), remove the Rigid Mount Bracket from the Docking Station by removing the four (4) 1/4-20 x 1/2” Button Head Screws and set aside for use in Step C.

B) Align the Rigid Mount Bracket holes with the holes on the mounting device. Using the (4) 1/4-20 x 5/8” Button Head Screws (Hardware Kit Item 3), secure the Rigid Mount Bracket to the mounting device. Torque screws to 80 in-lbs (9.0Nm) ± 10%.

1/4-20 x 5/8”Button Head

Screws

Rigid MountBracket

Motion/MountingDevice

DockingStation Mounting

Bracket

1/4-20 x 1/2”Button HeadScrews

C) Align the Docking Station Mounting Locations with the holes on the Rigid Mount Bracket. Using the (4) 1/4-20 x 5/8” Button Head Screws (retained from Step A), secure the Docking Station to the Rigid Mount Bracket. Torque screws to 40 in-lbs (4.5Nm) ± 10%.

DockingStation

1/4-20 x 1/2”Button HeadScrews

Rigid MountBracket

www.havis.com • 1-800-524-99006 7

Installation (continued)

OPTION B INSTALLATION:A) Align the Rigid Mount Bracket holes with the VESA 75mm holes on the mounting device. Using the (4) M4 Pan Head Screws (Hardware Item 4), (4) Washers, M4 (Hardware Item 5) and (4) Lock Washers, M4 (Hardware Item 6) secure the Rigid Mount Bracket to the mounting device from the rear. Torque screws to 20 in-lbs (2.3Nm) ± 10%.

OPTION C INSTALLATION:A) Using (2) fasteners appropriate for the mounting surface (not included), secure the Rigid Mount Bracket through the access holes via the front of Docking Station.

DockingStation

M4 x 0.7x12mmPan HeadScrews

Mounting Device(VESA 75 mm)

Lock Washer, M4Washer, M4

Mounting Surfaceappropriate fasteners

Access to Rigid Mount Bracket via front of

Docking Station

Mounting Surfacehole pattern

(For reference only)

3.0”

Installation

1) Identify your required mounting configuration and select the appropriate fasteners from the Hardware Kit. OPTION A: Havis vehicle motion/mounting equipment. Use Hardware Kit Item 3 (1/4-20x5/8” long Button Head Screws) OPTION B: Motion/mounting device with VESA 75mm hole pattern. Use Hardware Kit Item 4 (M4 x 0.7x12mm long Pan Head Screw), Hardware Kit Item 5 (Washers, M4), and Hardware Kit Item 6 (Lock Washers, M4) OPTION C: Other mounting surfaces without rear access. Hardware not supplied, use appropriate hardware for preferred mounting surface.

OPTION A INSTALLATION:A) Using a 5/32” Hex Drive (not provided), remove the Rigid Mount Bracket from the Docking Station by removing the four (4) 1/4-20 x 1/2” Button Head Screws and set aside for use in Step C.

B) Align the Rigid Mount Bracket holes with the holes on the mounting device. Using the (4) 1/4-20 x 5/8” Button Head Screws (Hardware Kit Item 3), secure the Rigid Mount Bracket to the mounting device. Torque screws to 80 in-lbs (9.0Nm) ± 10%.

1/4-20 x 5/8”Button Head

Screws

Rigid MountBracket

Motion/MountingDevice

DockingStation Mounting

Bracket

1/4-20 x 1/2”Button HeadScrews

C) Align the Docking Station Mounting Locations with the holes on the Rigid Mount Bracket. Using the (4) 1/4-20 x 5/8” Button Head Screws (retained from Step A), secure the Docking Station to the Rigid Mount Bracket. Torque screws to 40 in-lbs (4.5Nm) ± 10%.

DockingStation

1/4-20 x 1/2”Button HeadScrews

Rigid MountBracket

www.havis.com • 1-800-524-99008 5

Cable Management

1) Tip the Docking Station to a position that is comfortable to work with.

2) Install power cable as necessary for your computing needs.

3) Use Zip Tie (Hardware Kit Item 1) to strain relieve cable. Use a Strain Relief Point to anchor the cable. If desired for routing purposes, additional Strain Relief Points on each side of Docking Station may be used.

4) Create a service loop with the cable to ensure that no tension is on the connector and to enable intended motion.

5) Tie off the cable onto a stationary part of the mounting system.

Collect cable and secureto the mounting system.

(Note: Mounting system not included)

This loop must be large enough to allow full range of expected rotation and extension without stressing connection.

Docking Station

Parts Included

FRONTAll Models

Barrel Lock

Docking Connector

Latch Handle

Latch TabLocator Pin

BACK

Strain Relief

Ports

Mounting Hole (x4)

www.havis.com • 1-800-524-99004 9

1. Zip Ties (5) 2. Keys (2) 3. 1/4”-20 x 5/8” long Button Head Screws (5) 4. M4 x 0.7 x 12mm long Pan Head Screws (5) 5. Washers, M4 (5) 6. Lock Washers, M4 (5) Extra hardware (screws) providedTools required for installation: • 5/32” Hex Drive (For attaching Docking Station to Mount with Button Head 1/4”-20 Screws)

• #2 Philips Screwdriver (For attaching Docking Station to VESA 75mm hole pattern equipment with Pan Head M4 x 0.7 x 12mm Screws)

Hardware Kit

Port Replication Capability

Parts Included

TOP of Docking Station

BOTTOMof Docking Station

LEDPower Indicator

Operation - Docking

1) Ensure Docking Station is unlatched by lifting Latch Handle.

2) Hold tablet in landscape orientation, with bottom angled toward Docking Station. Lower tablet into the bottom of the Docking Station.

DO NOT FORCE TABLET ONTO DOCKING STATION. IF THERE IS RESISTANCE,CHECK ALIGNMENT OF TABLET ON DOCKING STATION.

Alignment Sockets Back Side of tablet in Protective Case

Alignment Posts DS-APP-100 Series Docking Station

NOTE: Ensure a proper connection by aligning the tablet’sAlignment Sockets with the Docking Station’s Alignment Posts

Power Input

PWR

DC IN 12V

www.havis.com • 1-800-524-9900

Table of Contents

10 3

SpecificationsPort Replication CapabilityParts IncludedInstallationCable ManagementOperation - DockingOperation - UndockingSupplying Power to iPad

3446891011

Specifications

Power Supply Input 12.0 V DC-In

Dimensions 10.8” ( 27.5 cm) H x 6.9” ( 17.6 cm ) W x 3.1” ( 8.0 cm ) D

Weight 1.6 lbs ( 0.68 kg )

Operating Environment 0° C to 35° C ( 32° F to 95°F )

Storage Environment -40° C to 85° C ( -40° F to 185° F )

• Do not place metal objects or containers of liquid on top of the Docking Station• If a malfunction occurs, immediately unplug the Power Supply and remove the tablet• Do not store the Docking Station where water, moisture, steam, dust, etc. are present• Do not connect cables into ports other than what they are specified for• Do not leave the Docking Station in a high temperature environment (greater than 85°C, 185°F) for a long period of time

Precautions

3) Pivot tablet so the top aligns with the Locator Pin at the top of the Docking Station. Lower the Latch Handle to secure tablet in place.

4) For theft deterrence, secure tablet by locking Docking Station with supplied key (Hardware Kit Item 2).

Operation - Docking (continued)

Operation - Undocking

1) If previously locked, unlock Docking Station using supplied key. 2) While holding tablet with one hand, lift the Latch Handle on the top of Docking Station.

3) Once unlatched grab both sides of tablet, rock the top forward and carefully lift out of Docking Station, top end first.

Latch Tab willengage in front of

Protective Case

EC DECLARATION OF CONFORMITY in accordance with EN 45014Manufacturers Name: Havis, Inc.Manufacturers Address: 75 Jacksonville Road, Warminster, PA 18974 USADeclares under our sole responsibility that the product: Product name: Havis Docking Station For Havis iPad Protective Case Model: DS-APP-1XX, where ‘X’ may be any alphanumeric character and which describes product options. May be followed by any alphanumeric characters which describe product options. Product Options: This declaration covers all options of the above product which bear the CE Marking.

Is in conformity with the following standards or other normative documents: EMC Directive 2004/108/EC: EN 55022:2010, Class B, Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

EN 55024:2010, Information technology equipment - Immunity characteristics - Limits and methods of measurement

Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)

BS EN 50498:2010: Section 7, after market electronic equipment in vehicles.

Supplementary Information:The product herewith complies with the requirements of the EMC Directive 2004/108/EC. This product requires theuse of the provided e-Marked automotive power supply when used within vehicles.

Warminster, PA, USA March 14, 2014 Bruce Jonik, Director of Engineering , Havis, Inc.

FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modifications to the model DS-APP-1XX not expressly approved by Havis, Inc. could void the user's authority to operate this equipment.

www.havis.com • 1-800-524-9900

DS-APP-102DS-APP-112

PKG-DS-APP-102PKG-DS-APP-112

PKG-DS-APP-132 PKG-DS-APP-142

Before Beginning (Original Instructions)

2 11

Havis is pleased to provide this Owner’s Manual to aid in the properinstallation and use of the DS-APP-100 Series Docking Station forthe Havis iPad Protective Case.

For questions regarding the set-up of your DS-APP-100 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.

Use the supplied power cable to charge your iPad once its securely docked.Plug barrel connector into the back of the Docking Station, and the cigarette lighter adaptor into the vehicle power source.

This Owner’s Manual applies to the following Part Numbers:

• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE.

• DO NOT USE COMPUTER WHILE DRIVING.

Supplying Power to iPad

• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

To Vehicle Power Source

To Docking Station

Owner’s ManualHavis Docking Station For theHavis iPad Protective Case

DS-APP-100-SERIES_OMN_9-17

www.havis.com1-800-524-9900

DS-APP-102DS-APP-112

PKG-DS-APP-102PKG-DS-APP-112

PKG-DS-APP-132PKG-DS-APP-142

DS-APP-100 Series

Related Products

Havis offers a wide variety of accessory products specifically for use with the DS-APP-100 Series Docking Station. For more information or to order, please visit www.havis.com.

DS-DA-218Desktop Stand for Tablet Docking StationsDurable stand for mounting tablet Docking Stationsfor use in the home or office.

DS-DA-700 SeriesApple iPad Protective CaseProtective Cases for Havis DS-APP-102 & DS-APP-112will accommodate Apple iPad 2, 3, 4, 5, Air, Air 2, & Pro 9.7

DS-DA-503Replacement KeysSet of two (2) replacement keys for DS-APP-100Series Docking Stations.

Havis, Inc.75 Jacksonville Road

Warminster, PA 18974www.havis.com 1-800-524-9900