Mud Pumps

P-600Mud Pump

P-750Mud Pump

an Astec company

American Augers mud pumps are standard stand-alone, self-powered machines that are the perfect accessories to use with mud motors, large reamers or whenever more mud volume is needed down hole.

P-600 and P-750 Mud Pumps • allow the operator to get enough

fl ow to keep the bore fl ushed clean of cuttings

• are designed with a compact skid mounting and provide a small footprint that are ideal for most drilling environments.

• are compatible with any drill brand making them suitable for contractors operating a variety of sizes, makes and models of drilling equipment.

www.AmericanAugers.com

an Astec company

* Optional Quiet Pak for optimum noise reduction control

P-600Mud Pump

MUD MOTOR SIZE FLOW RATE/MINUTE

Inches Millimeters U.S. Gallons Liters

3 3/8 85.72 30 - 120 113.6 - 454.2

3 1/2 88.9 75 - 160 283.9 - 605.7

4 3/4 120.6 100 - 250 378.5 - 946.4

6 3/4 171.4 300 - 600 1,136 - 2,271

Typical F low Rates for Popular Size Mud MotorsBe sure to allow enough extra mud fl ow to fl ood the bore

What Type of Contractor Should Use a Mud Pump? • Users of drilling equipment with

pumping capacities of 25 U.S. Gallons (95 L)/minute or larger regardless of soil type or conditions.

• Drillers typically making bores that are greater than 6 1/2 in. (165 mm) diameter and more than 200 ft. (61 m) long.

• Owners of mud motors for rock drilling applications.

• Operators in areas where mud disposal is expensive or restricted.

Both the P-600 and the P-750 should be considered when working in rock formations where the operating drill's on-board mud pump has fl uid-limited capacities and cannot produce enough pressure to drive the mud motor.

www.AmericanAugers.com

an Astec company

P-750Mud Pump

MUD MOTOR SIZE FLOW RATE/MINUTE

Inches Mil l imeters U.S. Gal lons Liters

3 3/8 85.72 30 - 120 113.6 - 454.2

3 1/2 88.9 75 - 160 283.9 - 605.7

4 3/4 120.6 100 - 250 378.5 - 946.4

6 3/4 171.4 300 - 600 1,136 - 2,271

8 203.2 400 - 900 1,514 - 3,407

Typical F low Rates for Popular Size Mud MotorsBe sure to allow enough extra mud fl ow to fl ood the bore

P-600 PERFORMANCE SPECIFICATIONS

Power TrainEngine: Caterpillar® C-15 Tier III Diesel * Tier III or Tier 4i determined by country of purchase

Fuel Capacity: 300 U.S. Gallons (1,136 L)

Rating: 475 HP (354 kW)

Transmission: Eaton-FRO-16210B, 10 speed

Maximum Speed: 2100 RPM

Clutch: 15 1/2 in. (394 mm) twin disk

Noise Rating: 1 meter distance 104 dB(A)

3 meter distance 95 dB(A)

Battery: (2) Deka 908DMF 12V, 1450 CCA

PumpPump Design: Tri-Plex 600GPM

Maximum Pressure: 1,505 psi (104 bar)

Rated Capacity: 600 U.S. Gallons* (2,067 L)/minute

Bore x Stroke: 6 x 6 in. (152.4 x 152.4 mm)

* Note: Pump capacity will vary depending on the overall mud weight, drilling fl uid mixture/content and working elevation

ControlsRemote Controls: Mud pump throttle, Mud pump start/stop,

clutch actuator, horn remote

Instruments: Digital mud fl ow meter (gallons/liters per minute)

DimensionsLength: 20 ft. (6.096 m)

Height: 9 ft. (2.7 m)

Width: 8 ft. (2.49 m)

WeightTotal Weight: 29,800 lbs. (13,520 kg) estimated

AccessoriesPulsation dampener on inlet and discharge

(2) 25 ft. (7.6 m) suction hoses with 6 in. (152.4 mm)

kamlock fi ttings

(2) 25 ft. (7.6 m) discharge hoses with 3 in. (76.2 mm)

NPT hammer unions

Liner wash system with supply tank

(2) 24 volt work lights* Note: All product performance specifi cations, components, weights, dimensions and other related information is subject to change without notice from the manufacturer.

P-750 PERFORMANCE SPECIFICATIONS

Power TrainEngine: Caterpillar® C-18 Tier III Diesel * Tier III or Tier 4i determined by country of purchase

Fuel Capacity: 300 U.S. Gallons (1,136 L)

Rating: 600 HP (447 kW)

Transmission: Eaton-RTLO-22918B, 10 speed

Maximum Speed: 2100 RPM

Clutch: 15 1/2 in. (394 mm) twin disk

Noise Rating: 1 meter distance 104 dB(A)

3 meter distance 95 dB(A)

Battery: (2) Deka 908DMF 12V, 1450 CCA

PumpPump Design: Quintiplex, piston and liner

Maximum Pressure: 1,500 psi (103 bar)

Rated Capacity: 750 U.S. Gallons* (2,839 L)/minute

Bore x Stroke: 5 1/2 x 7 7/8 in. (139.7 x 200 mm)

* Note: Pump capacity will vary depending on the overall mud weight, drilling fl uid mixture/content and working elevation

ControlsRemote Controls: Mud pump throttle, Mud pump start/stop,

clutch actuator, horn remote

Instruments: Digital mud fl ow meter (gallons/liters per minute)

DimensionsLength: 25 ft. 6 in. (7.8 m)

Height: 10 ft. 3 in. (3.12 m)

Width: 8 ft. (2.49 m)

WeightTotal Weight: 39,000 lbs. (17,690 kg)

AccessoriesPulsation dampener on inlet and discharge

(2) 25 ft. (7.6 m) suction hoses with 6 in. (152.4 mm)

kamlock fi ttings

4 in. (102 mm) NPT hammer union discharge connection

Liner wash system with supply tank

(2) 24 volt work lights* Note: All product performance specifi cations, components, weights, dimensions and other related information is subject to change without notice from the manufacturer.

The American Augers line of underground construction equipment is second-to-none. • Auger Boring Machines • Maxi-Rig & Mid-Size Directional Drills • Oil & Gas Drilling Rigs • Mud Pump & Cleaning Systems • Product Tooling & Accessories

American Augers products are manufactured at the company’s 241,000 square-foot facility in West Salem, Ohio, in the heart of Amish country between Columbus and Cleveland.

Since the founding of American Augers in 1970, there has never been a change in the company’s core value: having products developed by a can-do work force that focuses on mechanical, technological and customer-based design improvements. Our goal is to always exceed customer expectations by providing products that are not a cost of doing business, but an Investment in Success.

Did You Know? American Augers was the fi rst HDD manufacturer to eliminate chain and utilize a rack and pinion carriage design which is now the industry standard. Our rack and pinion drive provides smoother carriage movement, more precise operating control, long system life and no complicated parts.

American Augers machines are supported through a dedicated parts and technical service department. We are here to help whenever you need us 24 hours a day, 7 days a week, emergency or not.

www.AmericanAugers.com

AMERICAN AUGERS an Astec company

0811

Environmental CommitmentAmerican Augers is committed to manufacturing equipment that helps to preserve the sanctity of the global environment, and has done so by reducing noise and/or emissions outputs, and emphasizing the fact that our trenchless technology equipment requires little or no open cutting, which has very minimal impacts on natural surfaces, features, or habitats.