Embed Size (px)
DESCRIPTION
UPH12 UPH10 WD2 Location: Refer to Furniture Layout Plans XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3 SS01 Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City Item: Sofa, bridge table Back cushion to be similar to this image Image: Indicative of required aesthetic only. Page 1 of 27 / T0 Tag:
Citation preview
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Tag: SS01
Item: Sofa, bridge table
Performance
Specifications: Lounge seating unit with integral table, metal base
* 100mm high maple veneer wood platform, full width and depth
* 200mm high .375mm thick steel bar base frame and legs, chrome finish
* 30mm high steel rod risers between wood platform and base, chrome finish
* 150mm thick fixed seat and arm cushions
* 390mm high double layer fixed back cushions
* 130mm diameter contrasting fabric bolster pillows each end, attached
* CFC-free polyurethane foam cushions with polyester padding
* 510mm wide exposed wood platform table at center
* Flush mounted duplex power receptacle at center of table, retractable cover
* Power unit to have two receptacles that are individually fused
* Power unit to have 1800mm long cord below table with plug end to reach floor
box, provide low profile cable management full length under seating unit
* Electrical components to be compatible with Doha Qatar utilities
* Leather upholstery to have grease and stain resistant applied finish
* Floor glides
Dimensions: Overall: 2515mm W x 840mm D x 850mm H
Seat: 520mm D x 460mm H
Arms: 710mm H
Finishes: Overall Upholstery: UPH12 Edelman Leather Woven Leather WVNC007 Custom
Burnt Orange Color with Crypton finish (European full grain vegetable tanned
aniline dyed cowhide with embossed woven pattern)
Bolster Upholstery: UPH10 Edelman Leather Royal Hide RH52 Paleface with
Crypton finish (European full grain aniline dyed cowhide)
Or Approved Equals
Wood: WD2 Wood finish to match Interiors WD2
Base: FIN1 Polished Chrome
Image: Indicative of required aesthetic only.
Back cushion to be
similar to this image
UPH12 UPH10 WD2
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 1 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS02
Item: Sofa, chaise
Performance
Specifications: Lounge seating unit with integral table, table lamp, metal base
* 100mm high maple veneer wood platform, full width and depth
* 200mm high .375mm thick steel bar base frame and legs, chrome finish
* 30mm high steel rod risers between wood platform and base, chrome finish
* 150mm thick fixed seat and arm cushions
* 390mm high double layer fixed back cushions
* 130mm diameter contrasting fabric bolster pillows each end, attached
* CFC-free polyurethane foam cushions with polyester padding
* 510mm wide exposed wood platform table at end with 1200mm high table lamp
* 13mm square solid brass lamp post on 175mm square x 50mm high brass base
* Lamp base with one power receptacle and one communication port, grounded
* Lamp base attached to table platform with brass extended pipe kit
* Power unit to have 1800mm long cord below table with plug end to reach floor
box, provide low profile cable management full length under seating unit
* 240mm diameter x 355mm high cylinder lamp shade, white sandblasted acrylic
* Two horizontal candelabra lamp sockets at center point of lamp shade height
* Electrical components to be compatible with Doha Qatar utilities
* Leather upholstery to have grease and stain resistant applied finish
* Floor glides
Dimensions: Overall: 2515mm W x 840mm D x 850mm H
Seat: 520mm D x 460mm H
Arms: 710mm H
Finishes: Overall Upholstery: UPH12 Edelman Leather Woven Leather WVNC007 Custom
Burnt Orange Color with Crypton finish
Bolster Upholstery: UPH10 Edelman Leather Royal Hide RH52 Paleface with
Crypton finish (European full grain aniline dyed cowhide)
Or Approved Equals
Wood: WD2 Wood finish to match Interiors WD2
Base: FIN1 Polished Chrome
Image: Indicative of required aesthetic only.
UPH12
UPH10
Location: Refer to Furniture Layout Plans WD2
Furniture Specification Sheet
Page 2 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS03
Item: Sofa, one arm
Performance
Specifications: Two seat, one arm fully upholstered sofa
* Fully upholstered sofa with one 230mm wide upholstered arm rest
* Fixed back and seat cushions
* High density CFC-free polyurethane foam with polyester padding
* Aluminum legs with leveling glides
Dimensions: Overall: 1460mm W x 865mm D x 775mm H
Seat: 1230mm W x 570mm D x 420mm H
Finishes: Upholstery: UPH26 Designtex Incognito Pearl 2379-502 Frost
(100% Polymeric polyester with polyester knit backing)
Or Approved Equal
Legs: FIN5 Brushed Aluminum
Image: Indicative of required aesthetic only.
UPH26
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 3 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS04
Item: Lounge Chair, wood shell
Performance
Specifications: Upholstered lounge chair with exposed exterior wood shell
* 50mm thick maple veneer wood panel exterior shell and stringer
* Upholstered fixed back and seat interior cushions
* 130mm diameter contrasting fabric bolster pillows each side, attached
* Rectilinear steel base structure with rectangular steel risers, chrome finish
* Interior hardwood structure, glued and double dowelled, wood screws
* Interlaced webbing back and seat foundation
* High resilient CFC-free polyurethane foam cushions with polyester padding
* Floor glides
* Leather upholstery to have grease and stain resistant applied finish
Dimensions: Overall: 860mm W x 760mm D x 780mm H
Seat: 495mm W x 500mm D x 445mm H
Arms: 610mm H
Finishes: Overall Upholstery: UPH9 Edelman Leather Lusterleather LL0013 Milkweed with
Crypton finish (European full grain anilene dyed cowhide)
Bolster Upholstery: UPH3 Maharam Stripes 463980-002 Modulating Stripe
(92% wool, 8% nylon)
Or Approved Equals
Wood: WD1 Wood finish to match Interiors WD1
Base: FIN5 Satin Chrome
Image: Indicative of required aesthetic only.
UPH9
UPH3
WD1
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 4 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS05
Item: Sofa, two seat
Performance
Specifications: Upholstered lounge sofa with exposed exterior wood shell
* 50mm thick maple veneer wood panel exterior shell and stringer
* Upholstered fixed back and seat interior cushions
* 130mm diameter contrasting fabric bolster pillows each side, attached
* Rectilinear steel base structure with rectangular steel risers, chrome finish
* Interior hardwood structure, glued and double dowelled, wood screws
* Interlaced webbing back and seat foundation
* High resilient CFC-free polyurethane foam cushions with polyester padding
* Floor glides
* Leather upholstery to have grease and stain resistant applied finish
Dimensions: Overall: 1660mm W x 760mm D x 780mm H
Seat: 1295mm W x 500mm D x 445mm H
Arms: 610mm H
Finishes: Overall Upholstery: UPH9 Edelman Leather Lusterleather LL0013 Milkweed with
Crypton finish (European full grain anilene dyed cowhide)
Bolster Upholstery: UPH3 Maharam Stripes 463980-002 Modulating Stripe
(92% wool, 8% nylon)
Or Approved Equals
Wood: WD1 Wood finish to match Interiors WD1
Base: FIN5 Satin Chrome
Image: Indicative of required aesthetic only.
UPH9
UPH3
WD1
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 5 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS06
Item: Sofa, three seat
Performance
Specifications: Upholstered lounge sofa with exposed exterior wood shell
* 50mm thick maple veneer wood panel exterior shell and stringer
* Upholstered fixed back and seat interior cushions
* 130mm diameter contrasting fabric bolster pillows each side, attached
* Rectilinear steel base structure with rectangular steel risers, chrome finish
* Interior hardwood structure, glued and double dowelled, wood screws
* Interlaced webbing back and seat foundation
* High resilient CFC-free polyurethane foam cushions with polyester padding
* Floor glides
* Leather upholstery to have grease and stain resistant applied finish
Dimensions: Overall: 1840mm W x 760mm D x 780mm H
Seat: 1525mm W x 500mm D x 445mm H
Arms: 610mm H
Finishes: Overall Upholstery: UPH9 Edelman Leather Lusterleather LL0013 Milkweed with
Crypton finish (European full grain anilene dyed cowhide)
Bolster Upholstery: UPH3 Maharam Stripes 463980-002 Modulating Stripe
(92% wool, 8% nylon)
Or Approved Equals
Wood: WD1 Wood finish to match Interiors WD1
Base: FIN5 Satin Chrome
Image: Indicative of required aesthetic only.
UPH9
UPH3
WD1
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 6 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS07
Item: Sofa, three seat
Performance
Specifications: Fully upholstered sofa with metal base
* Attached seat cushions and loose back cushions
* High resilience CFC-free polyurethane foam cushion with polyester padding
* Nickel plated flat bar steel legs and stringers
* Floor glides.
Dimensions: Overall: 2415mm W x 850mm D x 760mm H
Seat: 445mm H
Arms: 670mm H
Finishes: Upholstery: UPH4 Architex Bark Olive
(81% Recycled polyester, 10% polyester, 9% Rayon)
Or Approved Equal
Base: FIN5 Brushed Nickel
Image: Indicative of required aesthetic only.
UPH4
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 7 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS08
Item: Lounge Chair
Performance
Specifications: Lounge chair with metal frame, arms
* Upholstered seat and back
* Exposed tubular metal frame, metallic powdercoat finish
* High density CFC-free polyurethane foam cushions
* Four legs
* Floor glides
Dimensions: Overall: 660mm W x 760mm D x 775mm H
Seat: 585mm W x 495mm D x 445mm H
Arms: 585mm H
Finishes: Upholstery: UPH6 Bernhardt Textiles Sheridan 3329-011 Ice
(52% Cotton, 21% Acetate, 14% Nylon, 13% Viscose, Teflon finish)
Or Approved Equal
Frame: FIN5 Satin Pewter
Image: Indicative of required aesthetic only.
UPH6
Location: Refer to BOQ for quantity
Furniture Specification Sheet
Page 8 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS09
Item: Sofa, three seat
Performance
Specifications: Lounge sofa with metal frame, arms
* Upholstered seat and back
* Exposed tubular metal frame, metallic powdercoat finish
* High density CFC-free polyurethane foam cushions
* Four legs
* Floor glides
* Leather upholstery to have grease and stain resistant applied finish
Dimensions: Overall: 1880mm W x 760mm D x 775mm H
Seat: 1790mm W x 495mm D x 445mm H
Arms: 585mm H
Finishes: Upholstery: UPH10 Edelman Royal Hide RH52 Paleface with Crypton
(European full grain aniline dyed cowhide)
Or Approved Equal
Frame: FIN5 Satin Pewter
Image: Indicative of required aesthetic only.
UPH10
Location: Refer to BOQ for quantity
Furniture Specification Sheet
Page 9 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS11
Item: Lounge Chair
Performance
Specifications: Classic lounge chair with exposed frame
* Steel bar welded frame, chrome finish
* Laminated leather strap back and seat supports, black
* Back and seat cushions composed of individual leather panels, hand welted and
hand tufted from a single leather hide, matching buttons
* CFC-free polyurethane foam cushions
* Floor glides
* Leather upholstery to have grease and stain resistant applied finish
Dimensions: Overall: 750mm W x 760mm D x 770mm H
Seat: 430mm H
Finishes: Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black with Crypton
finish (European full grain aniline dyed cowhide)
Or Approved Equal
Frame: FIN1 Polished chrome
Image: Indicative of required aesthetic only.
UPH16
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 10 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS12
Item: Sofa, bridge table
Performance
Specifications: Lounge seating unit with integral table, metal base
* 100mm high maple veneer wood platform, full width and depth
* 200mm high .375mm thick steel bar base frame and legs, chrome finish
* 30mm high steel rod risers between wood platform and base, chrome finish
* 150mm thick fixed seat and arm cushions
* 390mm high double layer fixed back cushions
* 130mm diameter contrasting fabric bolster pillows each end, attached
* CFC-free polyurethane foam cushions with polyester padding
* 510mm wide exposed wood platform table at center
* Flush mounted duplex power receptacle at center of table, retractable cover
* Power unit to have two receptacles that are individually fused
* Power unit to have 1800mm long cord below table with plug end to reach floor
box, provide low profile cable management full length under seating unit
* Electrical components to be compatible with Doha Qatar utilities
* Leather upholstery to have grease and stain resistant applied finish
* Floor glides
Dimensions: Overall: 2515mm W x 840mm D x 850mm H
Seat: 520mm D x 460mm H
Arms: 710mm H
Finishes: Overall Upholstery: UPH14 Edelman Leather Napoli NC7495 Custom Green with
Crypton finish (European full grain aniline dyed cowhide)
Bolster Upholstery: UPH15 Edelman Leather Dream Cow DRC24 Fresh Snow
with Crypton finish (European full grain aniline dyed cowhide)
Or Approved Equals
Wood: WD2 Wood finish to match Interiors WD2
Base: FIN1 Polished Chrome
Image: Indicative of required aesthetic only.
Back cushion to be
similar to this image
UPH14 UPH15 WD2
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 11 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS13
Item: Sofa, chaise
Performance
Specifications: Lounge seating unit with integral table, table lamp, metal base
* 100mm high maple veneer wood platform, full width and depth
* 200mm high .375mm thick steel bar base frame and legs, chrome finish
* 30mm high steel rod risers between wood platform and base, chrome finish
* 150mm thick fixed seat and arm cushions
* 390mm high double layer fixed back cushions
* 130mm diameter contrasting fabric bolster pillows each end, attached
* CFC-free polyurethane foam cushions with polyester padding
* 510mm wide exposed wood platform table at end with 1200mm high table lamp
* 13mm square solid brass lamp post on 175mm square x 50mm high brass base
* Lamp base with one power receptacle and one communication port, grounded
* Lamp base attached to table platform with brass extended pipe kit
* Power unit to have 1800mm long cord below table with plug end to reach floor
box, provide low profile cable management full length under seating unit
* 240mm diameter x 355mm high cylinder lamp shade, white sandblasted acrylic
* Two horizontal candelabra lamp sockets at center point of lamp shade height
* Electrical components to be compatible with Doha Qatar utilities
* Leather upholstery to have grease and stain resistant applied finish
* Floor glides
Dimensions: Overall: 2515mm W x 840mm D x 850mm H
Seat: 520mm D x 460mm H
Arms: 710mm H
Finishes: Overall Upholstery: UPH14 Edelman Leather Napoli NC7495 Custom Green with
Crypton finish (European full grain aniline dyed cowhide)
Bolster Upholstery: UPH15 Edelman Leather Dream Cow DRC24 Fresh Snow
with Crypton finish (European full grain aniline dyed cowhide)
Or Approved Equals
Wood: WD2 Wood finish to match Interiors WD2
Base: FIN1 Polished Chrome
Image: Indicative of required aesthetic only.
UPH14
UPH15
Location: Refer to Furniture Layout Plans WD2
Furniture Specification Sheet
Page 12 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS14
Item: Bench
Performance
Specifications: Contoured bench with accent upholstery on vertical side and end surfaces
* Internal steel frame
* Steel bar sled base legs, chrome finish
* High density CFC-free polyurethane foam with polyester padding
* Floor glides
* Leather upholstery to have grease and stain resistant applied finish
Dimensions: Overall: 3350mm L x 710mm W x 380-510mm H
Finishes: Top Surface Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black
with Crypton finish (European full grain aniline dyed cowhide)
Sides and Ends Vertical Surfaces Upholstery: UPH17 Edelman Leather Real
Woven RW02 Black (European full grain aniline dyed calfskin, fabric back)
Or Approved Equals
Base: FIN5 Satin Chrome
Image: Indicative of required aesthetic only.
UPH16 UPH17
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 13 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS15
Item: Bench
Performance
Specifications: Upholstered bench with wood platform and metal base
* 100mm high maple veneer wood platform, full width and depth
* 200mm high .375mm thick steel bar base frame and legs, chrome finish
* 30mm high steel rod risers between wood platform and base, chrome finish
* 150mm thick fixed seat cushions
* CFC-free polyurethane foam cushions with polyester padding
* Floor glides
* Leather upholstery to have grease and stain resistant applied finish
Dimensions: Overall: 2515mm W x 840mm D x 460mm H
Finishes: Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black with Crypton
finish (European full grain aniline dyed cowhide)
Or Approved Equals
Wood: WD2 Wood finish to match Interiors WD2
Base: FIN1 Polished Chrome
Image: Indicative of required aesthetic only.
UPH16
WD2
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 14 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS17
Item: Sofa, bridge table
Performance
Specifications: Lounge seating unit with integral table, metal base
* 100mm high maple veneer wood platform, full width and depth
* 200mm high .375mm thick steel bar base frame and legs, chrome finish
* 30mm high steel rod risers between wood platform and base, chrome finish
* 150mm thick fixed seat and arm cushions
* 390mm high double layer fixed back cushions
* 130mm diameter contrasting fabric bolster pillows each end, attached
* CFC-free polyurethane foam cushions with polyester padding
* 510mm wide exposed wood platform table at center
* Flush mounted duplex power receptacle at center of table, retractable cover
* Power unit to have two receptacles that are individually fused
* Power unit to have 1800mm long cord below table with plug end to reach floor
box, provide low profile cable management full length under seating unit
* Electrical components to be compatible with Doha Qatar utilities
* Leather upholstery to have grease and stain resistant applied finish
* Floor glides
Dimensions: Overall: 2515mm W x 840mm D x 850mm H
Seat: 520mm D x 460mm H
Arms: 710mm H
Finishes: Overall Upholstery: UPH18 Edelman Leather Russian Modernaya RM01 Alabaster
with Crypton finish (European full grain vegetable tanned aniline dyed calfskin)
Bolster Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black with
Crypton finish (European full grain aniline dyed cowhide)
Or Approved Equals
Wood: WD2 Wood finish to match Interiors WD2
Base: FIN1 Polished Chrome
Image: Indicative of required aesthetic only.
Back cushion to be
similar to this image
UPH18 UPH16 WD2
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 15 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS18
Item: Sofa, chaise
Performance
Specifications: Lounge seating unit with integral table, table lamp, metal base
* 100mm high maple veneer wood platform, full width and depth
* 200mm high .375mm thick steel bar base frame and legs, chrome finish
* 30mm high steel rod risers between wood platform and base, chrome finish
* 150mm thick fixed seat and arm cushions
* 390mm high double layer fixed back cushions
* 130mm diameter contrasting fabric bolster pillows each end, attached
* CFC-free polyurethane foam cushions with polyester padding
* 510mm wide exposed wood platform table at end with 1200mm high table lamp
* 13mm square solid brass lamp post on 175mm square x 50mm high brass base
* Lamp base with one power receptacle and one communication port, grounded
* Lamp base attached to table platform with brass extended pipe kit
* Power unit to have 1800mm long cord below table with plug end to reach floor
box, provide low profile cable management full length under seating unit
* 240mm diameter x 355mm high cylinder lamp shade, white sandblasted acrylic
* Two horizontal candelabra lamp sockets at center point of lamp shade height
* Electrical components to be compatible with Doha Qatar utilities
* Leather upholstery to have grease and stain resistant applied finish
* Floor glides
Dimensions: Overall: 2515mm W x 840mm D x 850mm H
Seat: 520mm D x 460mm H
Arms: 710mm H
Finishes: Overall Upholstery: UPH18 Edelman Leather Russian Modernaya RM01 Alabaster
with Crypton finish (European full grain vegetable tanned aniline dyed calfskin)
Bolster Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black with
Crypton finish (European full grain aniline dyed cowhide)
Or Approved Equals
Wood: WD2 Wood finish to match Interiors WD2
Base: FIN1 Polished Chrome
Image: Indicative of required aesthetic only.
UPH18
UPH16
Location: Refer to Furniture Layout Plans WD2
Furniture Specification Sheet
Page 16 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS21
Item: Lounge Chair
Performance
Specifications: Upholstered arm chair with exposed wood panel surround
* Fixed upholstered seat, back and arm cushions
* Maple veneer outer side and back panels
* Solid maple legs and rails
* Solid hardwood double doweled construction and corner blocked legs and rails
* 100mm thick multi-density CFC-free polyurethane foam wrapped in polyester
padding
* Seat support is stretched webbing on hardwood plywood frame
* Catalyzed lacquer finish
* Nylon floor glides
* Leather upholstery to have grease and stain resistant applied finish
Dimensions: Overall: 790mm W x 815mm D x 740mm H
Seat: 635mm W x 460mm H
Finishes: Upholstery: UPH19 Edelman Leather Metallic Dream Cow MDC06 Milky Way
with Crypton finish (European full grain aniline dyed cowhide)
Or Approved Equal
Wood: WD2 Wood finish to match Interiors WD2
Image: Indicative of required aesthetic only.
UPH19 WD2
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 17 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS22
Item: Lounge Chair
Performance
Specifications: Fully upholstered arm chair with metal base
* Attached seat cushions and loose back cushions
* High density CFC-free polyurethane foam cushion with polyester padding.
* Nickel plated flat bar steel legs and stringers
* Floor glides.
Dimensions: Overall: 900mm W x 825mm D x 760mm H
Seat: 445mm H
Finishes: Upholstery: UPH4 Architex Bark Olive
(81% Recycled polyester, 10% polyester, 9% Rayon)
Or Approved Equal
Base: FIN5 Brushed Nickel
Image: Indicative of required aesthetic only.
UPH4
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 18 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS28
Item: Lounge Chair
Performance
Specifications: Fully upholstered lounge chair with metal legs
* Fixed tight seat and back cushions
* Upholstered arm panels
* CFC-free polyurethane foam
* Aluminum legs with floor glides
Dimensions: Overall: 675mm W x 710mm D x 760mm H
Seat: 560mm W x 510mm D x 430mm H
Arms: 560mm H
Finishes: Upholstery: UPH28 Architex Bark Katahdin
(81% Recycled polyester, 10% polyester, 9% Rayon)
Or Approved Equal
Legs: FIN5 Brushed Aluminum
Image: Indicative of required aesthetic only.
UPH28
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 19 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS29
Item: Sofa, two seat
Performance
Specifications: Fully upholstered two seat sofa with metal legs
* Fixed tight seat and back cushions
* Upholstered arm panels
* CFC-free polyurethane foam
* Aluminum legs with floor glides
Dimensions: Overall: 1335mm W x 710mm D x 760mm H
Seat: 1220mm W x 510mm D x 430mm H
Arms: 560mm H
Finishes: Upholstery: UPH27 Anzea Space Cow 7231-35 Black Hole
(100% Polyurethane with Pollex Knit backing)
Or Approved Equal
Legs: FIN5 Brushed Aluminum
Image: Indicative of required aesthetic only.
UPH27
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 20 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS30
Item: Sofa, three seat
Performance
Specifications: Fully upholstered three seat sofa with metal legs
* Fixed tight seat and back cushions
* Upholstered arm panels
* CFC-free polyurethane foam
* Aluminum legs with floor glides
Dimensions: Overall: 1830mm W x 710mm D x 760mm H
Seat: 1715mm W x 510mm D x 430mm H
Arms: 560mm H
Finishes: Upholstery: UPH27 Anzea Space Cow 7231-35 Black Hole
(100% Polyurethane with Pollex Knit backing)
Or Approved Equal
Legs: FIN5 Brushed Aluminum
Image: Indicative of required aesthetic only.
UPH27
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 21 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS31
Item: Lounge Chair
Performance
Specifications: Fully upholstered lounge chair with metal legs
* Fixed tight seat and back cushions
* Upholstered arm panels
* CFC-free polyurethane foam
* Aluminum legs with floor glides
Dimensions: Overall: 675mm W x 710mm D x 760mm H
Seat: 560mm W x 510mm D x 430mm H
Arms: 560mm H
Finishes: Upholstery: UPH21 Brentano Fabrics Eco Stripe 7110-03 Landslide
(100% Wool)
Or Approved Equal
Legs: FIN5 Brushed Aluminum
Image: Indicative of required aesthetic only.
UPH21
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 22 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS36
Item: Sofa, upholstered shell
Performance
Specifications: Lounge seating unit with wood platform, metal base
* 100mm high maple veneer wood platform, full width and depth
* 200mm high .375mm thick steel bar base frame and legs, chrome finish
* 30mm high steel rod risers between wood platform and base, chrome finish
* 150mm thick fixed seat and arm cushions
* 390mm high double layer fixed back cushions
* 130mm diameter contrasting fabric bolster pillows each end, attached
* CFC-free polyurethane foam cushions with polyester padding
* Floor glides
* Leather upholstery to have grease and stain resistant applied finish
Dimensions: Overall: 2515mm W x 840mm D x 850mm H
Seat: 2260mm W x 520mm D x 460mm H
Arms: 710mm H
Finishes: Overall Upholstery: UPH18 Edelman Leather Russian Modernaya RM01 Alabaster
with Crypton finish (European full grain vegetable tanned aniline dyed calfskin)
Bolster Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black with
Crypton finish (European full grain aniline dyed cowhide)
Or Approved Equals
Wood: WD2 Wood finish to match Interiors WD2
Base: FIN1 Polished Chrome
Image: Indicative of required aesthetic only.
UPH18
UPH16
WD2
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 23 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS37
Item: Lounge Chair, upholstered shell
Performance
Specifications: Lounge seating unit with wood platform, metal base
* 100mm high maple veneer wood platform, full width and depth
* 200mm high .375mm thick steel bar base frame and legs, chrome finish
* 30mm high steel rod risers between wood platform and base, chrome finish
* 150mm thick fixed seat and arm cushions
* 390mm high double layer fixed back cushions
* 130mm diameter contrasting fabric bolster pillows each end, attached
* CFC-free polyurethane foam cushions with polyester padding
* Floor glides
* Leather upholstery to have grease and stain resistant applied finish
Dimensions: Overall: 840mm W x 840mm D x 850mm H
Seat: 585mm W x 520mm D x 445mm H
Arms: 700mm H
Finishes: Overall Upholstery: UPH18 Edelman Leather Russian Modernaya RM01 Alabaster
with Crypton finish (European full grain vegetable tanned aniline dyed calfskin)
Bolster Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black with
Crypton finish (European full grain aniline dyed cowhide)
Or Approved Equals
Wood: WD2 Wood finish to match Interiors WD2
Base: FIN1 Polished Chrome
Image: Indicative of required aesthetic only.
UPH18
UPH16
WD2
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 24 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS38
Item: Lounge Chair, with ottoman
Performance
Specifications: Fully upholstered lounge chair and ottoman with sled base
* Fixed seat cushion and tight back
* Upholstered arm panels
* CFC-free polyurethane foam
* Steel bar slad base legs with floor glides
* Leather upholstery to have grease and stain resistant applied finish
Dimensions: Overall: 730mm W x 820mm D x 780mm H
Seat: 450mm H
Ottoman: 510mm W x 510mm D x 450mm H
Finishes: Upholstery: UPH9 Edelman Leather Lusterleather LL0013 Milkweed with Crypton
finish (European full grain aniline dyed cowhide)
Or Approved Equal
Legs: FIN5 Brushed Aluminum
Image: Indicative of required aesthetic only.
UPH9
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 25 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS39
Item: Sofa, three seat
Performance
Specifications: Fully upholstered sofa with metal base
* Attached seat cushions and loose back cushions
* High density CFC-free polyurethane foam cushion with polyester padding.
* Nickel plated flat bar steel legs and stringers
* Floor glides.
* Leather upholstery to have grease and stain resistant applied finish
Dimensions: Overall: 2415mm W x 850mm D x 760mm H
Seat: 445mm H
Arms: 670mm H
Finishes: Upholstery: UPH9 Edelman Leather Lusterleather LL0013 Milkweed with Crypton
finish (European full grain aniline dyed cowhide)
Or Approved Equal
Base: FIN5 Brushed Nickel
Image: Indicative of required aesthetic only.
UPH9
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 26 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: SS40
Item: Lounge Chair
Performance
Specifications: Fully upholstered arm chair with metal base
* Attached seat cushions and loose back cushions
* High density CFC-free polyurethane foam cushion with polyester padding.
* Nickel plated flat bar steel legs and stringers
* Floor glides.
* Leather upholstery to have grease and stain resistant applied finish
Dimensions: Overall: 900mm W x 825mm D x 760mm H
Seat: 445mm H
Finishes: Upholstery: UPH9 Edelman Leather Lusterleather LL0013 Milkweed with Crypton
finish (European full grain aniline dyed cowhide)
Or Approved Equal
Base: FIN5 Brushed Nickel
Image: Indicative of required aesthetic only.
UPH9
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 27 of 27 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
