PACKER HD 5 .50

Packer Systems 1 of 20

Weatherford products and services are subject to Weatherford’s standard term s and conditions. For more information concerning the full line of Weatherford products and services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford.© 2004. Weatherford. All rights reserved.

INDEX NO. 400UNIT NO. 613 (4-1/2" - 9-5/8")PN. 613-40 through 95DATE 26-Oct-2004Revision 2.0

HD Compression-Set Retrievable Service Packer The Weatherford HD Compression-Set Retrievable Service Packer is designed for general-purpose service work. The hydraulically operated upper hold-down buttons anchor the packer during high differential pressures from below. The packer's internal unloader allows circulation below the hold-down buttons, making it easier to retrieve. Internal bypass provides circulation around the tool and faster trip times with less swabbing. The HD can be run in conjunction with a mechanical-set bridge plug for straddling intervals.

Features • Heavy-duty mandrel supports high hang-off weights • Tubing connections are standard on full-bore mandrel • Quarter-turn set, pickup unset • Pressure-balanced mandrel hold-down counteracts pressure from below • Automatic or manual jay mechanism available • Carbide slips and buttons available for long life

Benefits • Large-diameter hold-down buttons reduce casing damage • Wide range of sizes available • Simple, rig-friendly operation

Applications • Testing and treating operations • General-purpose service work • Squeeze cementing • Cased-hole production testing




SPECIFICATION GUIDE

4 3.476 3.548 3.286 1.500101.6 88.29 90.12 83.46 38.10

4-1/2 3.920 4.090 3.750 1.875114.3 99.57 103.89 95.25 47.63

4.156 4.276 3.969 1.8755 105.56 108.61 100.81 47.63

127.0 4.276 4.560 4.125 1.875108.61 115.82 104.78 47.63

4.670 4.778 4.500 2.000118.62 121.36 114.30 50.80

5-1/2 4.892 5.012 4.625 2.000139.7 124.26 127.30 117.48 50.80

4.892 5.012 4.625 2.375124.26 127.30 117.48 60.33

5.595 5.791 5.375 2.5006-5/8 142.11 147.09 136.53 63.50168.3 5.675 5.921 5.500 2.500

144.15 150.39 139.70 63.50

6.004 6.184 5.828 2.500152.50 157.07 148.03 63.50

7 6.094 6.276 5.890 2.500177.8 154.79 159.41 149.61 63.50

6.276 6.538 6.000 2.500159.41 166.07 152.40 63.50

6.625 6.765 6.453 2.5007-5/8 168.28 171.83 163.91 63.50193.7 6.875 7.025 6.688 2.500

174.63 178.44 169.88 63.50

8.535 8.755 8.281 3.984216.79 222.38 210.34 101.19

8.535 8.755 8.281 3.984216.79 222.38 210.34 101.19

2-7/8" EUE 8 RD 613-65

613-55

28.0 - 35.0 2-7/8" EUE 8 RD 613-67

613-75

613-50

26.0 - 32.0 2-7/8" EUE 8 RD 613-70

2-7/8" EUE 8 RD

613-58

613-71

613-57

24.0 - 32.0

17.0 - 26.0 2-7/8" EUE 8 RD

24.0 - 29.7 2-7/8" EUE 8 RD

33.7 - 39.0 2-7/8" EUE 8 RD

613-76

613-72

2-3/8" EUE 8 RD

14.0 - 17.0 2-7/8" EUE 8 RD

20.0 - 23.0 2-3/8" EUE 8 RD

14.0 - 17.0 2-3/8" EUE 8 RD

29.0 - 35.0

11.5 - 18.0

CASING

O.D. (IN./mm)

2-3/8" EUE 8 RD

2-3/8" EUE 8 RD

9.5 - 11.0 1.900" EU 10 RD 613-40

18.0 - 20.8

9.5 - 13.5 613-45

613-51

Weight (LB/FT .)

PACKER

STANDARD THREAD

CONNECTIONS

PRODUCT NUMBER

MIN. I.D.

(IN./mm)

MAX. O.D.

(IN./mm)

MAX. I.D.

(IN./mm)

MIN.. I.D.

(IN./mm)

9-5/8 244,48

43.5 - 53.5 4-1/2" EUE 8 RD 00146024

4-1/2" EUE 8 RD 0017080643.5 - 53.5

CAUTION: This tool is manufactured with several hardened alloy parts that may be susceptible to the corrosive

action of H2S. If the presence of H2S is suspected, it is recommended ordering the tool with special metallurgy.




SETTING PROCEDURE Run the packer to setting depth. Run the tool slowly, as with any hold down type packer, to prevent dulling of the hydraulic hold down buttons. The unloader remains open while running in the hole. Pick up on the tubing, rotate ¼ turn to the right at the packer, slack off on the tubing, set down weight on the packer. This sets the slips, closes the unloader and compresses the packing elements. CAUTION: Before running the tool, check the pressure affected areas chart. Consider other effects to be certain

that the unloader will remain closed during operations. RELEASING PRECEDURE Pick-up on the tubing at the packer to open the unloader. Allow time for the tubing and casing to equalize. Continued upward movement of the tubing unsets the slips, relaxes the packing elements, and automatically re-jays the packer. The tool may now be moved and reset or pulled from the well. CAUTION: If the HD Packer is run with a retrievable bridge plug, make sure the retrieving tool J-slot is compatible

with the J-slot on the packer. Whichever direction you release from the plug, the packer should set in the opposite direction. Example: Right hand set-right hand release retrievable bridge plug, left hand release retrieving tool and left hand set packer. (Example used is for left-hand set-auto release packer. Other J-slot configurations are available upon request.)

OPERATION After the HD Packer is set, pressure can be applied either above or below the tool. The unloader is held closed by the compensating piston. This insures closure of the unloader valve. The pressure will also be applied to the hold down buttons, forcing them against the casing wall and preventing upward movement of the packer. Pressure applied above the packer will be directed between the compensating piston and the seal receptacle. This forces them apart and holds the unloader valve closed. This pressure will also force the hold down buttons to retract into the hold down body, away from the casing wall.




PRESSURE AFFECTED AREAS The HD packer is equipped with a compensating piston, the area which must be considered in operations. The following chart indicates the piston and direction of the force acting on the mandrel due to pressure differential at the packer. Other factors such as tubing movement due to temperature change must be considered separately to determine all the forces acting on the packer. PRESSURE AFFECTED AREAS GUIDE

4 1.900 .34 DOWN 1.47 DOWN2.063 .17 UP 2.97 DOWN2.375 1.26 UP 3.69 DOWN1.900 1.76 DOWN .58 DOWN2.063 1.25 DOWN .95 DOWN2.375 .17 DOWN 1.67 DOWN2.063 1.76 DOWN 3.26 DOWN2.375 .67 DOWN 3.98 DOWN2.875 1.39 UP 5.53 DOWN2.063 3.33 DOWN .68 DOWN2.375 2.24 DOWN 1.39 DOWN2.875 .18 DOWN 2.95 DOWN2.375 3.49 DOWN 3.08 DOWN2.875 1.43 DOWN 4.64 DOWN3.500 1.70 UP 6.99 DOWN2.375 3.49 DOWN 4.52 DOWN2.875 1.43 DOWN 6.08 DOWN3.500 1.70 UP 8.45 DOWN2.875 11.85 DOWN 6.36 DOWN3.500 8.72 DOWN 8.71 DOWN4.000 5.77 DOWN 11.57 DOWN4.500 2.44 DOWN 13.99 DOWN

7 &

7'5/8

6-5/8 X

2-7/8

9-5/8

4-1/2 (3.594)

PKR. SIZE (IN.)

TUBING SIZE (IN.)

5-1/2 X

2-3/8"5-1/2"

X 2-7/8"

4-1/2 5

PRESSURE ABOVE (IN.2)

PRESSURE BELOW

(IN.2)

EXAMPLE: Consider a 5-1/2” packer set on 2-3/8” tubing with the backside loaded and the tubing dry causing a 3,000 PSI differential at the packer. From the guide, pressure from above acts down on the mandrel across .67 in.2. Multiply the pressure (3,000 PSI) by the area (.67 in.2) results in 2,010 lb. tension at the packer over tubing weight required to open the unloader.




DISASSEMBLY 1. Place top coupling (1) in vise. (When using acme threads, remove set

screws (50).) 2. Remove bottom sub (47) from inner mandrel (2). (When using acme threads,

remove o-ring (51).) 3. Align holes in rubber retainer (33) and rubber mandrel (33). Place a bar in

holes and remove rubber mandrel assembly (29 thru 46) from valve body (27). Set assembly aside.

4. Remove valve body (27) from central body (22). [On 9-5/8” and larger, remove valve body from extension body (25). Remove extension body from central body (22).]

5. Remove central body (22) from hydraulic hold down (7). 6. Remove top coupling (1) from vise and place lower end of inner mandrel (2)

in vise. DO NOT WRENCH OR CLAMP ON SEAL SURFACE. 7. Remove top coupling (1) from inner mandrel. [When using acme threads,

remove set screws (49) and o-ring (48).] [5-1/2” and larger sizes, remove hold down extension (3) from hydraulic hold down (7). Remove o-ring (4) from hold down extension.]

8. Remove hold down cap (5) from hydraulic hold down (7). 9. Remove cap screws (11), hold down straps (12), and strap retainer (13) from

hydraulic hold down (7). 10. Remove button spring (9) and hold down buttons (8) from hydraulic hold

down (7). Remove o-rings (10) from hold down buttons. 11. Remove hydraulic hold down (7) from inner mandrel (2). Remove o-rings (6

& 15). 12. Remove compensating piston (18) from compensating mandrel (14).

Remove o-rings (16 & 17). 13. Remove compensating mandrel (14) from seal receptacle (19). DO NOT WRENCH OR CLAMP ON SEAL SURFACE. 14. Remove seal retainer (24) from seal receptacle (19). 15. Remove seal receptacle (19) from inner mandrel (2). Remove o-rings (20 &

21) and seal (23). 16. Place set aside assembly (29 thru 46) in vise with rubber retainer (33) in vise. 17. Remove packing elements (29 & 31) and rubber spacers (30) from rubber

mandrel (33). 18. Remove set screws (43) from J-body (46) and remove J-body (LEFT HAND

THREAD) from control body (37). [On 6-5/8” and larger, remove retaining ring (45) from J-body.]

19. Clamp and hold drag blocks (40). Remove drag block retainer (44) from control body (37) and remove drag blocks (40) and drag block springs (41).

20. Remove rubber mandrel cap (42) from rubber mandrel (33). 21. Remove control body (37) from rubber mandrel (33). Remove slips (35) and

slip springs (36) from control body. [ 7-5/8” and larger, remove slip support screw (38) from control body (37) and remove lower slip support (37) before removing slips (35).

22. Remove lower cone (34) from rubber retainer (32). Remove rubber mandrel (33) from rubber retainer.

23. Clean and inspect all parts. Replace any worn or damaged parts.

1

2

54

6

12

7

89

1011

13

13

1514

1617

1819

2021

2223

24

2627

30

29

29

30

31

32

33

34

35

36

37

40

41

42

43

46

47

10




ASSEMBLY 1. Place rubber retainer (32) in vise. Install rubber mandrel (33) in rubber

retainer. 2. Install lower cone (34) over lower end of rubber mandrel (33) and in rubber

retainer (32). 3. Install lower slips (35) and slip springs (36) in control body (37). [7-5/8” and

larger, install lower slip support (37) in control body (37) and install slip support screw (38).]

4. Install control body (39) on rubber mandrel (33) and install rubber mandrel cap (42) on rubber mandrel.

5. Install drag blocks (40) and drag block springs (41) in control body (37) and clamp. Install drag block retainer (44) onto control body (37).

6. Install J-body (46) (LEFT HAND THREAD) onto control body (37). [6-5/8” and larger, install retaining ring (45) onto J-body (46) before installing J-body onto control body.] Install set screws (43) into J-body (46).

7. Install packing elements (29 & 31) and rubber spacers (30) onto rubber mandrel (33).

8. Install o-ring (26) in valve body (27). [6-5/8” and larger, install gage ring (28).]

9. Install valve body (27) onto rubber mandrel (33). [9-5/8” and larger, install extension body (25) onto valve body (27).]

10. Install central body (22) with fluid relief holes toward the valve body, onto valve body (27). Set this assembly aside.

11. Install o-rings (20 & 21) and seal (23) in seal receptacle (19). Lubricate o-rings and seal.

12. Install seal retainer (24) onto seal receptacle (19). Slide seal receptacle (19) onto lower end of inner mandrel (2).

13. Slide the compensating mandrel (14) over top end of inner mandrel (2) and install in seal receptacle (19).

14. Install o-rings (16 & 17) into compensating piston (18). Lubricate o-rings and slide compensating piston onto compensating mandrel (14).

15. Install o-rings (6 & 15) in hydraulic hold down (7). Install strap retainer (13) onto lower end of hydraulic hold down (7).

16. Install o-ring (4) in hold down extension (3). [5-1/2” and larger, install hold down extension in hydraulic hold down (7).]

17. Slide hydraulic hold down (7) onto inner mandrel (2) up to compensating piston (18).

18. Install o-rings (10) onto hold down buttons (8) and install hold down buttons into hydraulic hold down (7).

19. Install button springs (9), hold down straps (12), and cap screws (11) in hydraulic hold down (7).

20. Install hold down cap (5) onto hydraulic hold down (7). 21. Install top coupling (1) onto inner mandrel (2). [When using acme threads,

install o-ring (48) install coupling, and install set screw (49).] 22. Install top coupling (1) in vise. Slide set aside assembly onto lower end of

inner mandrel (2) and install central body (22) onto hydraulic hold down (7). 23. Install bottom sub (47) onto inner mandrel (2). [When using acme threads,

install o-ring (51) in bottom sub, install sub (47) and install set screws (50).]

1

2

54

6

12

7

89

1011

13

13

1514

1617

1819

2021

2223

24

2627

30

29

2930

31

32

33

34

35

3637

40

41

42

43

46

47

10




ASSEMBLY / DISASSEMBLY TOOLS

4.000 101,60

080-45-900 613-45-PP1

4.500 114,30

080-45-900 613-45-PP1

5.000 127,00

080-45-900 613-45-PP1

5.500 139,70

080-55-900 613-55-PP1

6.625 168,28

080-70-900 613-55-PP1

7.000 177,80

080-70-900 613-55-PP1

7.625 193,68

080-70-900 613-55-PP1

9.625 244,48

080-95-900 613-95-PP1

SIZE(IN./mm)

DRAG BLOCKASSEMBLY / DISASSEMBLY

TOOL

HOLD DOWN BUTTONDISASSEMBLY

TOOL




PARTS LIST

4" X 1.900" 4-1/2" X 2-3/8"9.5 - 11.0 9.5 - 13.5

613-40-0C1 613-45-0C11 TOP COUPLING 21BC-03 613-45-6102 INNER MANDREL 613-40-210 613-45-2103 HOLD DOWN EXTENSION NOT REQ'D NOT REQ'D4 O-RING* 050-90-329 050-90-2365 HOLD DOWN CAP 613-40-370 613-45-3706 O-RING* 050-90-229 050-90-3337 HYDRAULIC HOLD DOWN 613-40-320 613-45-3218 HOLD DOWN BUTTON 613-40-145 (9) 613-45-445 (8)9 BUTTON SPRING 071-35-900 (45) 613-45-975 (48)10 O-RING* 050-90-121 (9) 050-90-125 (8)11 FLAT HEAD CAP SCREW* 005-03-006 (6) 005-03-008 (4)12 HOLD DOWN STRAP 613-40-360 (3) 613-45-360 (4)13 STRAP RETAINER 613-40-650 (2) 613-45-65014 COMPENSATING MANDREL 613-40-240 613-45-24015 O-RING* 050-90-230 050-90-23016 O-RING* 050-90-230 050-90-23417 O-RING* 050-90-228 050-90-23218 COMPENSATING PISTON 613-40-710 613-45-71019 SEAL RECEPTACLE 613-40-730 613-45-73020 O-RING* 050-90-140 050-90-23121 O-RING* NOT REQ'D 050-90-23122 CENTRAL BODY 613-40-380 613-45-38123 SEAL* 610-40-520 613-45-52024 SEAL RETAINER 613-40-530 613-45-53025 EXTENSION BODY NOT REQ'D NOT REQ'D26 O-RING* 050-90-138 050-90-23527 VALVE BODY 613-40-350 613-45-35028 GAGE RING NOT REQ'D NOT REQ'D29 PACKING ELEMENT* 602-40-513 (2) 602-45-513 (2)30 RUBBER SPACER 602-40-840 (2) 611-45-840 (2)31 PACKING ELEMENT* 602-40-511 602-45-51132 RUBBER RETAINER 602-40-850 602-45-85033 RUBBER MANDREL 600-40-220 613-45-22034 LOWER CONE 600-40-420 613-45-42035 LOWER SLIP 600-40-135 (4) 613-45-130 (4)36 SLIP SPRING* 070-45-900 (4) 071-45-901 (4)37 CONTROL BODY 610-40-330 613-45-33038 LOWER SLIP SUPPORT NOT REQ'D NOT REQ'D39 SLIP SUPPORT SCREW* NOT REQ'D NOT REQ'D40 DRAG BLOCK 090-45-900 (4) 090-45-90P (5)41 DRAG BLOCK SPRING* 091-00-900 (12) 091-00-900 (20)42 RUBBER MANDREL CAP 600-40-230 613-45-230

43 SET SCREW*003-C4-004 (4) 1/4-20 X 1/4"

003-C4-006 (4) 1/4-20 X 3/8"

44 DRAG BLOCK RETAINER 600-40-910 NOT REQ'D45 RETAINING RING NOT REQ'D NOT REQ'D46 J-BODY 613-40-341(LHA) 613-45-341(LHA)47 BOTTOM SUB 610-40-630 613-45-630

ITEM NO.

DESCRIPTION

*Common repair parts.

1

2

54

6

12

7

89

1011

13

13

1514

1617

1819

2021

2223

24

2627

30

29

2930

31

32

33

34

35

36

37

40

41

42

43

46

47

10




PARTS LIST

5" X 2-3/8" 5" X 2-3/8"18.0 - 21.0 11.5 - 18.0613-51-0C1 613-50-0C1

1 TOP COUPLING 613-45-610 613-45-6102 INNER MANDREL 613-45-210 613-45-2103 HOLD DOWN EXTENSION NOT REQ'D NOT REQ'D4 O-RING* 050-90-236 050-90-2365 HOLD DOWN CAP 613-51-370 613-50-3706 O-RING* 050-90-333 050-90-3337 HYDRAULIC HOLD DOWN 613-50-321 613-50-3218 HOLD DOWN BUTTON 613-51-141 (8) 613-50-141 (8)9 BUTTON SPRING 613-45-975 (48) 613-45-975 (48)10 O-RING* 050-90-125 (8) 050-90-125 (8)11 FLAT HEAD CAP SCREW* 005-03-008 (4) 005-03-008 (4) 12 HOLD DOWN STRAP 613-45-360 (4) 613-45-360 (4)13 STRAP RETAINER 613-51-650 613-50-65014 COMPENSATING MANDREL 613-45-240 613-45-24015 O-RING* 050-90-230 050-90-23016 O-RING* 050-90-234 050-90-23417 O-RING* 050-90-232 050-90-23218 COMPENSATING PISTON 613-45-710 613-45-71019 SEAL RECEPTACLE 613-45-730 613-45-73020 O-RING* 050-90-231 050-90-23121 O-RING* 050-90-231 050-90-23122 CENTRAL BODY 613-45-381 613-45-38123 SEAL* 613-45-520 613-45-52024 SEAL RETAINER 613-45-530 613-45-53025 EXTENSION BODY NOT REQ'D NOT REQ'D26 O-RING* 050-90-235 050-90-23527 VALVE BODY 613-51-350 613-50-35028 GAGE RING NOT REQ'D NOT REQ'D29 PACKING ELEMENT* 602-52-513 (2) 602-50-513 (2)30 RUBBER SPACER 613-51-840 (2) 601-50-840 (2)31 PACKING ELEMENT* 602-52-511 602-50-51132 RUBBER RETAINER 613-51-850 602-50-85033 RUBBER MANDREL 613-51-220 613-45-22034 LOWER CONE 613-45-420 613-45-42035 LOWER SLIP 600-50-136 (4) 600-50-136 (4)36 SLIP SPRING* 071-45-901 (4) 071-45-901 (4)37 CONTROL BODY 613-51-330 613-50-33038 LOWER SLIP SUPPORT NOT REQ'D NOT REQ'D39 SLIP SUPPORT SCREW* NOT REQ'D NOT REQ'D40 DRAG BLOCK 090-55-900 (5) 090-55-90P (5)41 DRAG BLOCK SPRING* 091-00-900 (25) 091-00-900 (25)42 RUBBER MANDREL CAP 613-45-230 613-45-230

43 SET SCREW*003-C4-006 (4) 1/4-20 X 3/8"

003-C4-006 (4) 1/4-20 X 3/8"

44 DRAG BLOCK RETAINER NOT REQ'D NOT REQ'D45 RETAINING RING NOT REQ'D NOT REQ'D46 J-BODY 613-51-341(LHA) 613-50-341(LHA)47 BOTTOM SUB 613-45-630 613-45-630

ITEM NO.

DESCRIPTION


1

2

54

6

12

7

89

1011

13

13

1514

1617

1819

2021

2223

24

2627

30

29

2930

31

32

33

34

35

36

37

40

41

42

43

46

47

10




DIMENSIONAL DATA

4.000 101,60

613-40-0C1 64.438 1636,73

4.125 104,78

2.156 54,76

1.975 50,17

2.500 63,50

4.500 114,30 613-45-0C1

63.625 1616,08

5.000 127.00

3.063 77,80

2.422 61,52

3.250 82,55

5.000 127,00 613-51-0C1

63.625 1616,08

5.000 127.00

3.063 77,80

2.422 61,52

3.250 82,55

5.000 127,00 613-50-0C1

63.625 1616,08

5.000 127.00

3.063 77,80

2.422 61,52

3.250 82,55

4.000 101,60

613-40-0C1 3.250 82,55

3.313 84,15

1.500 38,10

3.286 83,46

2.500 63,50

4.500 114,30

613-45-0C1 3.750 95,25

3.750 95,25

1.875 47,63

3.750 95,25

2.880 73,15

5.000 127,00 613-51-0C1

3.969 100,81

3.969 100,81

1.875 47,63

3.969 100,81

2.880 73,15

5.000 127,00 613-50-0C1

4.125 104,78

4.125 104,78

1.875 47,63

4.125 104,78

2.880 73,15

SIZE (IN./mm)

PRODUCT NUMBER

DIMENSIONS (IN/mm)

F G H J K

SIZE (IN/mm.)

PRODUCT NUMBER A B C D E

DIMENSIONS (IN./mm)

K

F

D

A

B

C

E

G

G

J

J

H




PARTS LIST

5-1/2" X 2-3/8" 5-1/2" x 2-3/8" 5-1/2" X 2-7/8"20.0 - 23.0 14.0 - 17.0 14.0 - 17.0613-57-0C3 613-55-0C1 613-58-003

1 TOP COUPLING 12BB-02 12BB-02 405-70-6202 INNER MANDREL 613-55-210 613-55-210 613-58-2103 HOLD DOWN EXTENSION 613-55-310 613-55-310 NOT REQ'D4 O-RING* 050-90-334 050-90-334 NOT REQ'D5 HOLD DOWN CAP 613-57-370 613-55-370 613-58-3706 O-RING* 050-90-236 050-90-236 050-90-3377 HYDRAULIC HOLD DOWN 613-57-321 613-57-321 613-58-3228 HOLD DOWN BUTTON 613-57-980 (6) 613-55-980 (6) 613-56-980 (6)9 BUTTON SPRING 613-55-975 (18) 613-55-975 (18) 613-55-975 (18)

10 O-RING* 050-90-224 (6) 050-90-224 (6) 050-90-133 (6)11 FLAT HEAD CAP SCREW* 005-C5-008 (3) 005-C5-008 (3) 005-C5-008 (3)12 HOLD DOWN STRAP 613-55-360 (3) 613-55-360 (3) 613-58-360 (3)13 STRAP RETAINER 613-57-650 613-55-650 613-55-65014 COMPENSATING MANDREL 613-55-240 613-55-240 613-58-24015 O-RING* 050-90-241 050-90-241 050-90-24016 O-RING* 050-90-342 050-90-342 050-90-34217 O-RING* 050-90-339 050-90-339 050-90-34018 COMPENSATING PISTON 613-55-710 613-55-710 613-58-71019 SEAL RECEPTACLE 613-55-730 613-55-730 613-58-73020 O-RING* 050-90-235 050-90-235 050-90-15321 O-RING* 050-90-236 050-90-236 050-90-15322 CENTRAL BODY 613-55-381 613-55-381 613-55-38223 SEAL* 613-55-520 613-55-520 613-56-52524 SEAL RETAINER 613-55-530 613-55-530 613-58-53025 EXTENSION BODY NOT REQ'D NOT REQ'D NOT REQ'D26 O-RING* 050-90-235 050-90-235 050-90-23527 VALVE BODY 613-57-350 613-55-350 613-58-35128 GAGE RING NOT REQ'D NOT REQ'D NOT REQ'D29 PACKING ELEMENT* 602-57-513 (2) 602-55-513 (2) 602-56-513 (2)30 RUBBER SPACER 602-57-840 (2) 602-55-840 (2) 602-59-840 (2)31 PACKING ELEMENT* 602-57-511 602-55-511 602-56-51132 RUBBER RETAINER 611-57-850 611-55-850 610-56-85033 RUBBER MANDREL 613-57-220 613-55-220 613-58-22134 LOWER CONE 613-55-420 613-55-420 613-58-42035 LOWER SLIP 710-55-120 (4) 710-55-120 (4) 600-58-132 (4)36 SLIP SPRING* 071-55-900 (8) 071-55-900 (8) 071-55-900 (4)37 CONTROL BODY 613-57-330 613-55-330 613-58-33038 LOWER SLIP SUPPORT NOT REQ'D NOT REQ'D NOT REQ'D39 SLIP SUPPORT SCREW* NOT REQ'D NOT REQ'D NOT REQ'D40 DRAG BLOCK 090-45-90P (6) 090-55-90P (6) 090-56-900 (4)41 DRAG BLOCK SPRING* 091-00-900 (24) 091-00-900 (30) 091-00-900 (20)42 RUBBER MANDREL CAP 600-55-230 600-55-230 600-56-23043 SET SCREW* 5/16-18 X 1/2" 003-C5-008 (3) 003-C5-008 (3) 003-C5-006 (3) 44 DRAG BLOCK RETAINER 600-57-910 600-55-910 600-59-91045 RETAINING RING NOT REQ'D NOT REQ'D NOT REQ'D46 J-BODY 613-55-343(LHM) 613-55-341(LHA) 613-58-343(LHM)47 BOTTOM SUB 610-55-630 610-55-630 613-58-630

ITEM NO.

DESCRIPTION


15

8

12

11

9

10

3

6

4

2

1

5

7

9

13

14

1617

1819

2021

2223

24

26

27

29

30

31

30

29

32

33

34

35

36

37

40

41

44

43

42

46

47




DIMENSIONAL DATA

5.500 139,70 613-57-0C3 71.000

1803,404.875 123,83

3.063 77,80

2.579 65,51

3.375 85,73

5.500 139,70

613-55-0C1 71.000 1803,40

4.875 123,83

3.063 77,80

2.579 65,51

3.375 85,73

5.500 139,70 613-58-003

70.780 1797,81

5.656 143,66

3.688 93,68

2.900 73,66 N/A

5.500 139,70 613-57-0C3

4.500 114,30

4.500 114,30

2.000 50,80

4.500 114,30

3.375 85,73

5.500 139,70 613-55-0C1 4.625

117,484.625 117,48

2.000 50,80

4.625 117,48

3.375 85,73

5.500 139,70

613-58-003 4.625 117,48

4.625 117,48

2.375 60,33

4.625 117,48

3.625 92,08

SIZE (IN./mm)

PRODUCT NUMBER

DIMENSIONS (IN./mm)

F G H J K

DIMENSIONS (IN./mm)SIZE (IN./mm)


E

C

D

F

G

H

J

J

K

A

B




PARTS LIST

6-5/8" X 2-7/8" 6-5/8" X 2-7/8"28.0 - 35.0 24.0 - 32.0613-67-0C0 613-65-0C0

1 TOP COUPLING 12BB-01 12BB-012 INNER MANDREL 613-70-210 613-70-2103 HOLD DOWN EXTENSION 613-70-310 613-70-3104 O-RING* 050-90-339 050-90-3395 HOLD DOWN CAP 613-67-370 613-67-3706 O-RING* 050-90-241 050-90-2417 HYDRAULIC HOLD DOWN 613-67-320 613-67-3208 HOLD DOWN BUTTON 613-67-980 (6) 613-67-980 (6)9 BUTTON SPRING 613-70-975 (18) 613-70-975 (18)10 O-RING* 050-90-230 (6) 050-90-230 (6)11 FLAT HEAD CAP SCREW* 005-C5-008 (3) 005-C5-008 (3)12 HOLD DOWN STRAP 613-70-360 (3) 613-70-360 (3)13 STRAP RETAINER 613-67-650 613-67-65014 COMPENSATING MANDREL 613-70-240 613-70-24015 O-RING* 050-90-348 050-90-35016 O-RING* 050-90-348 050-90-34817 O-RING* 050-90-344 050-90-34418 COMPENSATING PISTON 613-67-715 613-67-71519 SEAL RECEPTACLE 613-67-730 613-67-73020 O-RING* 050-90-241 050-90-24121 O-RING* 050-90-243 050-90-24322 CENTRAL BODY 613-67-385 613-67-38523 SEAL* 613-70-520 613-70-52024 SEAL RETAINER 613-67-530 613-67-53025 EXTENSION BODY NOT REQ'D NOT REQ'D26 O-RING* 050-90-241 050-90-24127 VALVE BODY 613-67-350 613-67-35028 GAGE RING 613-67-830 (2) 613-65-830 (2)29 PACKING ELEMENT* 613-67-513 (2) 602-65-513 (2)30 RUBBER SPACER 613-67-840 (2) 613-65-840 (2)31 PACKING ELEMENT* 613-67-511 602-65-51132 RUBBER RETAINER 613-67-855 613-67-85533 RUBBER MANDREL 613-70-220 613-70-22034 LOWER CONE 613-67-420 613-67-42035 LOWER SLIP 613-67-120 (4) 613-67-120 (4)36 SLIP SPRING* 071-70-900 (8) 071-70-900 (8)37 CONTROL BODY 613-67-330 613-67-33038 LOWER SLIP SUPPORT NOT REQ'D NOT REQ'D39 SLIP SUPPORT SCREW* NOT REQ'D NOT REQ'D40 DRAG BLOCK 090-55-90P (6) 090-56-90P (6)41 DRAG BLOCK SPRING* 091-00-900 (30) 091-00-900 (30)42 RUBBER MANDREL CAP 600-70-230 600-70-23043 SET SCREW* 3/8-16 X 5/8" 003-C6-010 (3) 003-C6-010 (3)44 DRAG BLOCK RETAINER 613-67-910 613-67-91045 RETAINING RING 613-67-911 613-67-91146 J-BODY 613-70-340(RHA) 613-70-340(RHA)47 BOTTOM SUB 613-67-635 613-70-635

ITEM NO.

DESCRIPTION


1

2

3

4

56

78

910

11

13

12

14

1516

1718

1920

2122

2324

2627

28

29

30

31

30

29

28

3233

34

35

36

37

4041

4243

4445

46

47




DIMENSIONAL DATA

6.625 168,28 613-67-0C0 77.000

1955,805.250 133,35

3.668 93,17

3.175 80,65

4.000 101,60

6.625 168,28

613-65-0C0 77.000 1955,80

5.250 133,35

3.668 93,17

3.175 80,65

4.000 101,60

6.625 168,28

613-67-0C0 5.375 136,53

5.375 136,53

2.500 63,50

5.375 136,53

3.375 85,73

6.625 168,28

613-65-0C0 5.375 136,53

5.375 136,53

2.500 63,50

5.500 139,70

3.375 85,73

SIZE (IN./mm)


DIMENSIONS (IN./mm)

SIZE (IN./mm)

PRODUCT NUMBER

DIMENSIONS (IN./mm)

F G H J K

C

D

E

F

G

H

J

J

K

A

B




PARTS LIST

7" X 2-7/8" 7" X 2-7/8" 7" X 2-7/8"26.0 - 32.0 17.0 - 26.0 29.0 - 35.0613-70-0C0 613-72-0C0 613-71-0C2

1 TOP COUPLING 12BB-01 12BB-01 12BB-012 INNER MANDREL 613-70-210 613-70-210 613-70-2103 HOLD DOWN EXTENSION 613-70-310 613-70-310 613-70-3104 O-RING* 050-90-339 050-90-339 050-90-3395 HOLD DOWN CAP 613-70-370 613-72-370 613-71-3706 O-RING* 050-90-241 050-90-241 050-90-2417 HYDRAULIC HOLD DOWN 613-70-320 613-70-320 613-70-3208 HOLD DOWN BUTTON 613-70-980 (6) 613-72-980 (6) 613-70-980 (6)9 BUTTON SPRING 613-70-975 (18) 613-70-975 (18) 613-70-975 (18)10 O-RING* 050-90-230 (6) 050-90-230 (6) 050-90-230 (6)11 FLAT HEAD CAP SCREW* 005-C5-008 (3) 005-C5-008 (3) 005-C5-008 (3)12 HOLD DOWN STRAP 613-70-360 (3) 613-70-360 (3) 613-70-360 (3)13 STRAP RETAINER 613-70-650 613-72-650 613-70-65014 COMPENSATING MANDREL 613-70-240 613-70-240 613-70-24015 O-RING* 050-90-350 050-90-350 050-90-35016 O-RING* 050-90-350 050-90-350 050-90-35017 O-RING* 050-90-344 050-90-344 050-90-34418 COMPENSATING PISTON 613-70-715 613-70-715 613-70-71519 SEAL RECEPTACLE 613-70-730 613-70-730 613-70-73020 O-RING* 050-90-241 050-90-241 050-90-24121 O-RING* 050-90-243 050-90-243 050-90-24322 CENTRAL BODY 613-70-385 613-70-385 613-70-38523 SEAL* 613-70-520 613-70-520 613-70-52024 SEAL RETAINER 613-70-530 613-70-530 613-70-53025 EXTENSION BODY NOT REQ'D NOT REQ'D NOT REQ'D26 O-RING* 050-90-241 050-90-241 050-90-24127 VALVE BODY 613-70-350 613-70-350 613-70-35028 GAGE RING 611-70-830 (2) 611-72-830 (2) 611-71-83029 PACKING ELEMENT* 602-70-513 (2) 602-72-513 (2) 602-71-513 (2)30 RUBBER SPACER 611-70-840 (2) 611-72-840 (2) 611-71-840 (2)31 PACKING ELEMENT* 602-70-511 602-72-511 602-71-51132 RUBBER RETAINER 611-70-855 611-70-855 611-70-85533 RUBBER MANDREL 613-70-220 613-70-220 613-71-22034 LOWER CONE 613-70-420 613-70-420 613-70-42035 LOWER SLIP 700-70-121 (4) 700-70-121 (4) 700-70-121 (4)36 SLIP SPRING* 071-70-900 (8) 071-70-900 (8) 071-70-900 (8)37 CONTROL BODY 613-70-330 613-70-330 613-70-33038 LOWER SLIP SUPPORT NOT REQ'D NOT REQ'D NOT REQ'D39 SLIP SUPPORT SCREW* NOT REQ'D NOT REQ'D NOT REQ'D40 DRAG BLOCK 090-70-90P (6) 090-80-90P (6) 090-70-90P (6)41 DRAG BLOCK SPRING* 091-01-900 (36) 091-01-900 (36) 091-01-900 (36)42 RUBBER MANDREL CAP 600-70-230 600-70-230 600-70-23043 SET SCREW* 3/8-16 X 5/8" 003-C6-010 (3) 003-C6-010 (3) 003-C6-010 (3) 44 DRAG BLOCK RETAINER 600-70-910 600-72-910 600-71-91045 RETAINING RING 600-70-911 600-70-911 600-70-91146 J-BODY 613-70-340(RHA) 613-70-340(RHA) 613-70-342(RHM)47 BOTTOM SUB 613-70-635 613-70-635 613-70-635

ITEM NO.

DESCRIPTION





DIMENSIONAL DATA

7.000 177,80 613-71-0C2 77.000

1955,805.250 133,35

3.668 93,17

3.175 80,65

4.000 101,60

7.000 177,80

613-70-0C0 77.000 1955,80

5.250 133,35

3.668 93,17

3.175 80,65

4.000 101,60

7.000 177,80 613-72-0C0

77.000 1955,80

5.250 133,35

3.668 93,17

3.175 80,65

4.000 101,60

7.000 177,80 613-71-0C2

5.817 147,75

5.719 145,26

2.500 63.50

5.828 148,03

3.375 85,73

7.000 177,80 613-70-0C0 5.875

149,235.719 145,26

2.500 63.50

5.890 149,61

3.375 85,73

7.000 177,80

613-72-0C0 6.094 154,79

6.094 154,79

2.500 63.50

6.000 152,40

3.375 85,73

SIZE (IN./mm)


DIMENSIONS (IN./mm)

SIZE (IN./mm)

PRODUCT NUMBER

DIMENSIONS (IN./mm)

F G H J K

C

D

E

F

G

H

J

J

K

B

A




PARTS LIST

7-5/8" X 2-7/8" 7-5/8" X 2-7/8"33.7 - 39.0 24.0 - 29.7613-75-0C0 613-76-0C0

1 TOP COUPLING 12BB-01 12BB-012 INNER MANDREL 613-70-210 613-70-2103 HOLD DOWN EXTENSION 613-70-310 613-70-3104 O-RING* 050-90-339 050-90-3395 HOLD DOWN CAP 613-75-370 613-76-3706 O-RING* 050-90-241 050-90-2417 HYDRAULIC HOLD DOWN 613-70-320 613-70-3208 HOLD DOWN BUTTON 613-75-445 (6) 613-76-445 (6)9 BUTTON SPRING 613-70-975 (18) 613-70-975 (18)10 O-RING* 050-90-230 (6) 050-90-230 (6)11 FLAT HEAD CAP SCREW* 005-C5-008 (3) 005-C5-008 (3)12 HOLD DOWN STRAP 613-70-360 (3) 613-70-360 (3)13 STRAP RETAINER 613-75-650 613-76-65014 COMPENSATING MANDREL 613-70-240 613-70-24015 O-RING* 050-90-350 050-90-35016 O-RING* 050-90-350 050-90-35017 O-RING* 050-90-344 050-90-34418 COMPENSATING PISTON 613-70-715 613-70-71519 SEAL RECEPTACLE 613-70-730 613-70-73020 O-RING* 050-90-241 050-90-24121 O-RING* 050-90-243 050-90-24322 CENTRAL BODY 613-70-385 613-70-38523 SEAL* 613-70-520 613-70-52024 SEAL RETAINER 613-70-530 613-70-53025 EXTENSION BODY NOT REQ'D NOT REQ'D26 O-RING* 050-90-241 050-90-24127 VALVE BODY 613-70-350 613-70-35028 GAGE RING 650-75-830 (2) 613-76-351 (2)29 PACKING ELEMENT* 602-75-513 (2) 613-76-513 (2)30 RUBBER SPACER 602-75-840 (2) 613-76-840 (2)31 PACKING ELEMENT* 602-75-511 613-76-51132 RUBBER RETAINER 613-75-855 613-75-85533 RUBBER MANDREL 613-70-220 613-70-22034 LOWER CONE 600-75-420 600-75-42035 LOWER SLIP 613-75-111 (4) 613-75-111 (4)36 SLIP SPRING* 071-10-900 (16) 071-10-900 (16) 37 CONTROL BODY 613-75-330 613-75-33038 LOWER SLIP SUPPORT 613-75-200 613-75-20039 SLIP SUPPORT SCREW* 613-75-339 613-75-339 (2)40 DRAG BLOCK 090-70-90P (6) 090-70-90P (6)41 DRAG BLOCK SPRING* 091-01-900 (36) 091-01-900 (36)42 RUBBER MANDREL CAP 600-70-230 600-70-23043 SET SCREW* 3/8-16 X 5/8" 003-C6-010 (3) 003-C6-010 (3) 44 DRAG BLOCK RETAINER 613-75-910 613-76-91045 RETAINING RING 600-75-911 600-75-91146 J-BODY (RHA) 613-70-340(RHA)47 BOTTOM SUB 613-70-635 613-70-635

ITEM NO.

DESCRIPTION


1

2

3

4

56

78

910

1112

13

15

14

1617

1819

2021

2223

24

2627

28

29

30

31

30

29

28

32

34

33

35

36

3738

39

4041

42

43

44

45

47

46




DIMENSIONAL DATA

7-5/8 193,68 613-75-0C0 77.000

1955,805.250 133,35

3.668 93,17

3.175 80,65

4.000 101,60

7-5/8 193,68

613-76-0C0 77.000 1955,80

5.250 133,35

3.668 93,17

3.175 80,65

4.000 101,60

7-5/8 193,68 613-75-0C0 6.453

163,916.453 163,91

2.500 63,50

6.453 163,91

3.375 85,73

7-5/8 193,68

613-76-0C0 6.688 169,88

6.688 169,88

2.500 63,50

6.688 169,88

3.375 85,73

SIZE (IN./mm)

PRODUCT NUMBER

DIMENSIONS (IN./mm)

F G H J K

SIZE (IN./mm)


DIMENSIONS (IN./mm)

J

J

D

E

F

G

H

K

C

A

B




PARTS LIST

9-5/8" X 4-1/2" 9-5/8" X 4-1/2"43.5 - 53.5 43.5 - 53.500170806 00146024

1 TOP COUPLING 00152566 001525662 INNER MANDREL 00153588 001535883 HOLD DOWN EXTENSION 00153651 001536514 O-RING* #428 90D NITRILE 00152819 001528195 HOLD DOWN CAP 00159250 001592506 O-RING* #360 90D NITRILE 00152816 001528167 HYDRAULIC HOLD DOWN 00153670 001536708 HOLD DOWN BUTTON 00153681 (8) 00153659 (8)9 BUTTON SPRING 00163134 (16) 00163134 (16)10 O-RING* #338 90D NITRILE 00152903 (8) 00152903 (8)11 FLAT HEAD CAP SCREW* 5/16-18 X 5/8" 00152608 (4) 00152608 (4)12 HOLD DOWN STRAP 00159147 (4) 00159147 (4)13 STRAP RETAINER 00153595 0015359514 COMPENSATING MANDREL 00153638 0015363815 O-RING* #439 90D NITRILE 00163248 0016324816 O-RING* #439 90D NITRILE 00163248 0016324817 O-RING* #433 90D NITRILE 00163244 0016324418 COMPENSATING PISTON 00153637 0015363719 SEAL RECEPTACLE 00153645 0015364520 O-RING* #357 90D NITRILE 00152906 0015290621 O-RING* #358 90D NITRILE 00152904 0015290422 CENTRAL BODY 00159001 0015900123 SEAL* NITRILE 00161841 0016184124 SEAL RETAINER 00159306 0015930625 EXTENSION BODY 00159181 0015918126 O-RING* #252 90D NITRILE 00152911 0015291127 VALVE BODY 00161820 0016182028 GAGE RING 00153921 00153921

29 PACKING ELEMENT*00153889 (2) 80D NITRILE

00151741 (2) 90D NITRILE

30 RUBBER SPACER 00153856 (2) 00153856 (2)

31 PACKING ELEMENT*00149052 70D NITRILE

00149052 70D NITRILE

32 RUBBER RETAINER 00153888 0015388833 RUBBER MANDREL 00161776 0016177634 LOWER CONE 00161621 0016162135 LOWER SLIP 00153702 (6) 00159059 (4)36 SLIP SPRING* 00152725 (24) 00163152 (8)37 CONTROL BODY 00161865 0015369538 LOWER SLIP SUPPORT 00162071 0016207139 SLIP SUPPORT SCREW* 00154211 (2) 00154211 (2)40 DRAG BLOCK 00152742 (8) 00152693 (8)41 DRAG BLOCK SPRING* 00163134 (48) 00163134 (48)42 RUBBER MANDREL CAP 00154192 0015419243 SET SCREW* 3/8-16 X 5/8" 00152672 (3) 00152672 (3)44 DRAG BLOCK RETAINER 00161931 0016193145 RETAINING RING 00162169 0016216946 J-BODY (RHA) 00161707 00161707 47 BOTTOM SUB 00161672 00161672

ITEM NO.

DESCRIPTION


1

2

3

4

56

78

910

1112

13

15

14

1617

1819

20

23

25

2627

28

29

30

31

30

29

32

34

33

35

36

3738

39

4041

42

43

44

45

47

46

2221

24




DIMENSIONAL DATA

9-5/8 244,48 00170806 90.250

2292,356.625 168,28

5.531 140,49

4.850 123,19

6.000 152,40

9-5/8 244,48 00146024 90.250

2292,356.625 168,28

5.531 140,49

4.850 123,19

6.000 152,40

9-5/8 244,48

00170806 8.250 209,55

8.281 210,34

3.984 101,19

8.281 210,34

5.125 130,18

9-5/8 244,48

00146024 8.250 209,55

8.281 210,34

3.984 101,19

8.281 210,34

5.125 130,18

SIZE (IN./mm)

PRODUCT NUMBER

DIMENSIONS (IN./mm)

F G H J K

C D E

DIMENSIONS (IN./mm)SIZE (IN./mm)

PRODUCT NUMBER A B

J

J

D

E

F

G

H

K

C

A

B

Documents

PACKER HD 5 .50