Page 2 of 3 - Kele

Engineering StandardsSYS_01.00

Lighting Control System Riser

Rev: 4 Type: Reference Date: 01-20-15 Job #:

Engineered: WCD

Drawn: NB

Checked:

1 of 1

1

2

3

4

5

6

1

2

3

NAMEADDR: XXLOCATION

RPDSXX-XXRIXX-00

NAMESLOT: 1LOCATION

SCUI8-00

NAMEADDR:XXLOCATION

ZCDS-00-00SCSS-00 SCDS-00 SCDS-00

SCAO8-00

CTS1RL-XXADDR: 0(TYPICAL 2)

RPSSXX-XX

ZCSS-00-00

NAMESLOT: 1LOCATION

SCSS-00


RPDSXX-XX

NAMESLOT:1LOCATION

SCSS-00 SCAO8-00

RKX-XX

NAMEIP: XXX.XXX.XX.XXLOCATION

BACnet Router

MSTP

BAS System


LEVEL-1

LEVEL-2

LEVEL-3

CTS1CH-XXADDR: 1


NAMESLOT: 2LOCATION


CTS4CH-XXADDR: 0

CTS6CH-XXADDR: 1


CTS1CH-XXADDR: 0

CTS2CH-XXADDR: 1

NAMESLOT: 2LOCATION

CTS1RL-XXADDR: 0

CTS3CH-XXADDR: 1

CTS2RL-XXADDR: 0

CTS1RL-XXADDR: 1

CTS1CH-XXADDR: 2

CTS2CH-XXADDR: 3

NAMESLOT: 1LOCATION

NAMESLOT: 2LOCATION

NAMESLOT: 3LOCATION

CTS3PR-XXADDR: 4

CTS6PR-XXADDR: 5

BACnet: CL3P 22/2 Shielded, Low Cap, Max 4,000'

Station/Satellite Network: CL3P 22/4, Max 500'

IP Network: CAT-5e, Max 328'

Lighting control system furnished by Division 25 (Controls Contractor) and installed by Division 26.

Note:


BACnet Router

MSTP


BACnet Router

MSTP

BAS NETWORK

CS1

CS1

CTS1CH-XXADDR: 2

T BACnet MS/TP Network Terminator

Station/Satellite Network TerminatorT

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

Star

T-Tap

Daisy Chain

T T T T T T

1800 Sandy Plains Industrial Parkway, Suite 216, Marietta, GA 30066 800-241-9173 www.BRTint.com

Tech Note 071014_02

Date: July 10, 2014 Product: TK-2.0 Subject: USB Cable and Driver Installation Note: Recommended USB Installation Procedure

1. Turn the Controller Board Power Switch “Off”. 2. Insert the Standard-A USB connector into a USB 2.0 port on your computer. 3. Insert the Micro-B USB connecter into the controller. 4. Turn the Controller Board Power Switch “On”.

Page 2 of 3


Recommended USB Cable Driver Installation

Computer Requirements Operating System: Windows 7 (32/64-bit) USB: Standard-A USB 2.0 port 1. Click the Start button, then right click on Computer and click Manage. 2. Under “System Tools” click Device Manager. (The cable will populate under “Other

Devices”) 3. Right click on BRT Zone Controller and click Update Driver Software.

4. Click Browse my computer for driver software.

Page 3 of 3


5. Browse for USB driver location and click Next.

6. The Blue Ridge Technologies driver package has not been digitally signed yet, click Install this driver software anyway.

7. In the Update Driver Software pop-up window, Windows has successfully updated your driver software.

Data Sheet : Catalog Page 96

Project Part Number Ref.

Tech Kit 2.0

Overview Tech Kit 2.0 (TK-2.0) includes all components for USB and Bluetooth wireless configuration of the Aperio Open Control Platform. TK-2.0 facilitates Controller Board setup, programing, firmware updates, and firmware restoration. The kit features Blue Ridge Technologies Essentials (BRT Essentials) software on a 1GB flash drive, a Bluetooth Dongle, a Bluetooth Module, a 12’(3.66m) Tech Cable (TC), a screwdriver, and a Carry Bag.

FeaturesConfigures RI, RK, RP, ZC and related Satellite/Station components:

Satellite Capacitive Touch Station (CTS)

USB and Bluetooth wireless communication Complete BRT Essentials software

Warranty Two (2) year limited manufacturer warranty from date of shipment (extended warranty optional)

Computer RequirementsOperating System: Windows 7 (32/64-bit)Java: Java 1.7 (JRE) or greaterBluetooth: Microsoft Bluetooth StackUSB: Standard-A USB 2.0 port

Flash Drive SpecificationsCapacity: 1GBContents:

BRT Essentials softwareBRT Essentials Template FilesUSB DriversSupporting Documents

Bluetooth SpecificationsDongle Connection

Hardware: Standard-A USB port on computerWireless: Supports multiple device connections

Module ConnectionHardware: Bluetooth Plug on Controller BoardWireless: PTP connection

Wireless Type: Bluetooth v2.0+EDR Class 1Wireless Range: Open air 328’ (100m)Wireless Compatibility: BRT Essentials software (API available from Blue Ridge for interface development)

Tech Cable SpecificationsType: USB 2.0Dimensions: 12’(3.66m)LComputer Connection: Standard-A USB portController Board Connection: Micro-B USB port

Accessory SpecificationsScrewdriver

Type: 0.4 x 2.5mm slot headCarry Bag

Type: Flat cloth with zipper closureDimensions: 7.25”(184mm)H x 9.50”(241mm)W

Data Sheet : Catalog Page 97

www.BRTint.com : 800-241-9173 Blue Ridge Technologies® © 2014 Blue Ridge Technologies International, LLC All Rights Reserved. TK20-DS-V14.05

Tech Kit 2.0

Part Number Description

TK-2.0 Tech Kit 2.0 (Micro-USB Cable, USB flash drive with BRT Essentials software, Bluetooth Dongle, Bluetooth Module, Screwdriver, and Carry Bag)

Ordering Information

UL924 Terminations Emergency Bypass Structure

TESTJP2

Emergency PowerDistribution Panel

Normal PowerDistribution Panel

Retrofit Interior (RI) / Relay Panel (RP)

UL924Lighting Tough Relay(LTR)

Lighting Load

EmergencyTransfer Switch

Generator

JP1

LED 1

24VDC OUT24VAC

123

Fact

ory

Wire

d fo

r Nor

mal

Pow

er

ConfigurationJumper

Test Jumper

RI / RP Transformer

Power LED

*User installed option. 24VD

C(+)

Nor

mal

Pow

er In

dica

tor L

amp*

24VD

C(-)

Norm

al P

ower

Indi

cato

r Lam

p*

Normal (Utility) Power

LTR Terminations

Demo Kit Features

Line In

Relay Output

Wire Strip Length IndicatorManual Override Lever

Phillips / Slot / Square Head Screw TerminalsMounting Hole

G

Controller Board Terminations (RI / RK / RP)

J1

Bluetooth

Micro-B USB PlugStandard-A USB Plug

Bluetooth Module

Controller Board Terminations (ZC)

Micro-B USB Plug

Bluetooth Module

Standard-A USB Plug

BAC

net (

+) O

utBA

Cne

t (-)

Out

Shie

ld O

ut

BAC

net (

+) In

BAC

net (

-) In

Shie

ld In

120VAC 8’(2.44m) Power Cord NEMA 5-15 Plug

Occupancy Sensor Simulator

Light Sensor Simulator

Line Voltage Switch (Standard Rocker Switch) Capacitive Touch Station (CTS)

LED Lamps

Power Switch

Power LED / Run LED

Micro-B USB Port

Bluetooth Plug

Test Button

Baud Rate Dip SwitchNetwork Address Rotary Switch 10’s

Network Address Rotary Switch 1’s

LEXP Terminations

PO

WE

RIN

PU

TS 1-16

INP

UTS

17-32

NJ5

J18J19

AD

DR

ES

STO

J26 OF C

ontroller

J4

J9 J13

R

RN

BD

AC

DI Jumper25-32*

DI Jumper17-24*

Add

ress

Jum

per

Con

trolle

r Boa

rdP

ort

Power LED

GN

DD

I 32

DI 3

1D

I 30

DI 2

9D

I 28

DI 2

7D

I 26

DI 2

5

GN

DD

I 24

DI 2

3D

I 22

DI 2

1D

I 20

DI 1

9D

I 18

DI 1

7

DI 9

DI 1

0D

I 11

DI 1

2D

I 13

DI 1

4D

I 15

DI 1

6G

ND

DI 1

DI 2

DI 3

DI 4

DI 5

DI 6

DI 7

DI 8

GN

D

DI Jumper1-8*

DI Jumper9-16*

*DI Jumper Position N(Dry Contact) / R(Externally Powered)

BN

+B

N-

S BN

+B

N-

SJ5

10’s 1’sTEST

ON

OFF

PWR RUN

SW3

J5

J3

J5

J3

BT48

5 Te

rmin

ator

Plu

g

General Architecture

BAS Router

Relay Panel (RP)

Internet

Field DevicesField DevicesSatellite/Station Network Satellite/Station Network

Field DevicesSatellite/Station Network


Retrofit Interior (RI) Retrofit Kit (RK)

IP

BACnet MS/TP

Satellite

CTS (Capacitive Touch Station)

Satellite


Satellite


Satellite


Satellite


Satellite


Satellite


Satellite


Satellite


Satellite


Satellite


LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)

CTS

Satellite/Station Network

Field Devices LVS OCC LS

Field Devices

Zone Control (ZC)


BAS Router

Internet





IP

BACnet MS/TP


CTS



Field Devices

Zone Control (ZC)


BAS Router

Relay Panel (RP)

Internet




Retrofit Kit (RK)

IP

BACnet MS/TP


CTS



Field Devices

Zone Control (ZC)


BAS Router

Relay Panel (RP)

Internet




Retrofit Interior (RI)

IP

BACnet MS/TP


CTS



Field Devices

Zone Control (ZC)


BAS Router

Relay Panel (RP)

Internet





IP

BACnet MS/TP


CTSField Devices LVS OCC LS

Field Devices

Zone Control (ZC)

CANbus Network


BAS Router

Relay Panel (RP)

Internet





IP

BACnet MS/TP




Field Devices

Zone Control (ZC)


BAS Router

Relay Panel (RP)

Internet





IP

BACnet MS/TP


CTS


Field Devices OCC LS

Field Devices

Zone Control (ZC)


BAS Router

Relay Panel (RP)

Internet





IP

BACnet MS/TP


CTS


Field Devices LVS LS

Field Devices

Zone Control (ZC)


BAS Router

Relay Panel (RP)

Internet





Retrofit Kit (RK)

IP

BACnet MS/TP


CTS


Field Devices LVS OCC

Field Devices

Zone Control (ZC)


BAS Router

Internet




IP

BACnet MS/TP


CTS



Field Devices

Zone Control (ZC)


BAS Router

Internet




IP

BACnet MS/TP


CTS



Field Devices

Relay Panel (RP)

Retrofit Interior (RI)

Retrofit Kit (RK)

CTS

LVS

OCC

LS

Relay Panel (RP) Retrofit Interior (RI) Retrofit Kit (RK)

Satellite



BAS Router

Internet




IP

BACnet MS/TP


CTS



Field Devices

Zone Control (ZC) Relay Panel (RP) Retrofit Interior (RI)

Relay Panel (RP) Retrofit Interior (RI) Retrofit Kit (RK)Zone Control (ZC)

Satellite

SC (Satellite) / CTS (Capacitive Touch Station)


BAS Router

Relay Panel (RP)

Internet

Field DevicesCANbus Network





IP

BACnet MS/TP


CTSField Devices LVS OCC LS

Field Devices

Zone Control (ZC)

CANbus Network

JP2

JP1123

24VAC IN 24VDC OUT

- +

~~LED1

TEST

UL924 EMERGENCY BYPASSCONFIGURATION JUMPER

NO JUMPER: EMERGENCY ACTION DISABLED

1-2 JUMPED: EMERGENCY ACTION CLOSES ALL RELAYS

2-3 JUMPED: EMERGENCY ACTION OPENS ALL RELAYS

TEST JUMPER

JP2NO JUMPER:SIMULATED POWER LOSS

UL924 EMERGENCY BYPASS

POWER IN: 24VAC IN +/-10%, 30VA, 50-60 Hz, Factory

Wired for Normal Power

POWER OUT: 24VDC for Normal Power Indicator Lamp

(User Installed Option)

POWER AVAILABLE: 200mA Shared Between UI's, SN, and UL924 Auxiliary Out

UL924 RELAY CONTROL

RP16: UL924 Controls RO 1-16




FAC

TOR

Y W

IRED

FO

R N

OR

MA

L P

OW

ER

24

VD

C(+

) N

OR

MA

L P

OW

ER L

AM

P IN

DIC

ATO

R2

4V

DC

(-)

NO

RM

AL

PO

WER

LA

MP

IND

ICA

TOR

Engineering StandardsRPDTL_01.20

Relay Panel, UL924 Detail

Rev: 4 Type: Date: 01-20-15 Job #:

Engineered: NB

Drawn: NB

Checked:

1 of 1

RO 53

RO 51

RO 49

RO 47

RO 45

RO 43

RO 41

RO 39

RO 37

RO 35

RO 33

RO 31

RO 27

RO 25

RO 23

RO 21

RO 19

RO 17

RO 15

RO 13

RO 11

RO 09

RO 07

RO 05

RO 03

RO 01

RO 29

RO 63

RO 61

RO 59

RO 57

RO 55

RO 64

RO 62

RO 60

RO 58

RO 56

RO 54

RO 52

RO 50

RO 48

RO 46

RO 44

RO 42

RO 40

RO 38

RO 36

RO 34

RO 32

RO 30

RO 28

RO 26

RO 24

RO 22

RO 20

RO 18

RO 16

RO 14

RO 12

RO 10

RO 08

RO 06

RO 04

RO 02

RPCB

TRANSFORMER

RELAY VOLTAGE DIVIDERS(RPRVD)

LEXP(Optional)

+24VAC

-24VACOU

TIN

+24VAC

-24VAC

TO UL924

RELAY PANEL

CONTROL BOARD

BYPASS

(RPCB)

ENCLOSURE

BLK

GRN

(NORMAL)CIRCUIT BREAKER

20A MAX

LINE

GROUND

NEUTRALWHT

(EMERGENCY)CIRCUIT BREAKER

20A MAX

WHT NEUTRAL

GROUNDGRN

BLK EMERGENCY GENERATOR

EMERGENCYTRANSFER

SWITCH

LOW VOLTAGE ENTRY

EMERGENCY CB-XX

BALLAST

EMERGENCY LIGHT FIXTURE

BLK

WHTNEUTRAL

BLK

BLK

LOAD

LINE VOLTAGE ENTRY LINE VOLTAGE ENTRY

UL924 EMER.

LEXP(Optional)

LEXP(Optional)

Off On

Status Indicator & Manual Override

Relay 01Line

Load

Wire Strip Length Indicator

On Off

JP1123

JP1123

JP1123

RELAY PANEL CONTROL BOARD (RPCB)

RO 64

RO 62

RO 60

RO 58

RO 56

RO 54

RO 52

RO 50

RO 48

RO 46

RO 44

RO 42

RO 40

RO 38

RO 36

RO 34

RO 32

RO 30

RO 28

RO 26

RO 24

RO 22

RO 20

RO 18

RO 16

RO 14

RO 12

RO 10

RO 08

RO 06

RO 04

RO 02

RO 63

RO 61

RO 59

RO 57

RO 55

RO 53

RO 51

RO 49

RO 47

RO 45

RO 43

RO 41

RO 39

RO 37

RO 35

RO 33

RO 31

RO 27

RO 25

RO 23

RO 21

RO 19

RO 17

RO 15

RO 13

RO 11

RO 09

RO 07

RO 05

RO 03

RO 01

RO 29

RELAY PANEL

RELAY OUTPUTS (RO)

LOAD RATINGS: Short Circuit Current Rating 30,000A at 277 VAC

20A Tungsten at 347 VAC

20A Resistive at 347 VAC

WIRE: (2) 14-10 AWG or (1) 8AWG (Solid or Stranded Copper Wire)

UNIVERSAL INPUTS (UI)

POWER: 24 VDC, 200 mA Total All Inputs

WIRE: 18 AWG Solid or Stranded, 500' Max

30A Ballast at 347 VAC

1.5 HP at 120 VAC

DIGITAL INPUTS (DI)

POWER: 24 VDC Externally Powered or Dry Contact

WIRE: 18 AWG Solid or Stranded, 500' Max

LINE VOLTAGE ENTRY

+24VGND

SN+SN-

BN

+

SHLDBN

-

1

ON

2 3 4 5 6 7 8

SW3 10's 1'sBN-Address

Baud Rate

0 1

23

456

78

9 0 1

23

456

78

9

+24VAC

-24VACOU

TIN

+24VAC

-24VAC

PWR RUN

Bluetooth

CAN-TXCAN-RXBUSYJP2

SN Terminator

TEST

J3

J1

LEXP

RELAYS 1-32

RELAYS 33-64

+24VGND

UI-1UI-2

+24VGND

UI-3UI-4

+24VGND

UI-5UI-6

+24VGND

UI-7UI-8

+24VGND

UI-9UI-10

+24VGND

UI-11UI-12

+24VGND

UI-13UI-14

+24VGND

UI-15UI-16

+24

VG

ND

UI-

17

UI-

18

+24

VG

ND

UI -

19

UI -

20

+24

VG

ND

UI-

21

UI -

22

+24

VG

ND

UI -

23

UI -

24

+5V

GN

D

POWER SWITCH

485-TX485-RX

BT-TXBT-RX

BTOC

TERMINATION-SN

(Un-terminated)

JP2

(Terminated)

BAUD RATE SELECTION-BN

1

ON

2 3 4 5 6 7 8

SW3

9600

1

ON

2 3 4 5 6 7 8

SW3

19200

1

ON

2 3 4 5 6 7 8

SW3

38400

1

ON

2 3 4 5 6 7 8

SW3

76800

STATION/SATELLITE NETWORK-SN

TOPOLOGY: Daisy Chain Only

BACnet MS/TP NETWORK-BN

TOPOLOGY: RS-485, (Half Duplex) Daisy Chain

WIRE: CL3P 22/2 Shielded, Low Cap, 4000' Max

WIRE: CL3P 22/4 Unshielded Low Cap, 500' Max

1

ON

2 3 4 5 6 7 8

SW3

115200

TERMINATION-BN

Plug EOL Resistor into J3to Terminate BACnet

JP2

RPCB

LOW VOLTAGE ENTRYLINE VOLTAGE ENTRY

LINE VOLTAGE ENTRYLINE VOLTAGE ENTRY

TORQUE SPECIFICATIONS

RO SCREW TERMINALS: 36in-lbs

GROUND LUG: 20in-lbs

4-40 FASTENERS: 5in-lbs (Max) for RO and Relay Voltage Divider Fasteners

6-32 FASTENERS: 10in-lbs (Max) for RPCB and LEXP Fasteners

RP 08 RP 16 RP 32 RP 48 RP 64

13.00" 5.75"

14.75"

18.00" 5.75"

16.20"

18.00" 5.75" 18.00" 5.75" 18.00" 5.75"

25.00"

33.80"

42.60"

0.00"1.00"

13.76"

12

.00

"

1.0

0"

0.0

0"

0.00"1.25"

14.70"

17

.00

"

1.0

0"

0.0

0"

17

.00

"

1.0

0"

0.0

0"

0.00"1.25"

23.50"

0.00"1.25"

10.80"

32.30"

17

.00

"

1.0

0"

0.0

0"

17

.00

"

1.0

0"

0.0

0"

0.00"1.25"

19.60"

41.10"

Ø0.25"

LEXP(Optional)

LEXP(Optional)

LEXP(Optional)

GN

D

DI -

7

DI -

8

DI-

6

DI -

4

DI -

5

DI -

3

DI -

1

DI -

2

DI -

11

DI -

9

DI -

10

DI -

14

DI-

12

DI-

13

GN

D

DI -

15

DI -

16

DI -

25

DI-

27

DI -

26

DI -

28

DI -

30

DI -

29

DI -

31

GN

D

DI -

32

DI -

23

GN

D

DI -

24

DI -

20

DI -

22

DI-

21

DI -

17

DI -

19

DI -

18

RN

J13

J9

NR

J4J5

C D

J18

J19

A BAD

DR

ESSTO

J26

OF C

on

troller

POWER

DI EXPANDER (LEXP)

Engineering StandardsRPDTL_01.00

Relay Panel Details, Standard


Engineered: NB

Drawn: NB

Checked: WCD

1 of 1

Off On

Status Indicator & Manual Override

Relay 01Line

Load

Wire Strip Length Indicator

On Off

Engineering StandardsRPSB32_01.00

Relay Panel 32 Relay, Low Voltage 2-Button Switch


Engineered: NB

Drawn: NB

Checked:

1 of 1

Relay 01

Relay 03

Relay 05

Relay 07

Relay 09

Relay 11

Relay 13

Relay 15

Relay 02

Relay 04

Relay 06

Relay 08

Relay 10

Relay 12

Relay 14

Relay 16

FROM MSTP NETWORK CL3P 22/2 SHIELDED LOW CAP MAX 4,000' CL3P 22/2 SHIELDED LOW CAP MAX 4,000'

CL3P 18/3 MAX 500'

CL3P 18/3 MAX 500'

CL3P 18/3 MAX 500'

GROUND

NEUTRAL

CIRCUIT-XXLOW

HIGH

BLKLINECIRCUIT BREAKER

20A MAX

NEUTRAL WHT

BALLAST-2

LIGHT FIXTURE

WHT

BALLAST-1

BLK

BLK

BLK

BLK

Relay 18

Relay 20

Relay 22

Relay 24

Relay 26

Relay 28

Relay 30

Relay 32

Relay 17

Relay 19

Relay 21

Relay 23

Relay 25

Relay 27

Relay 29

Relay 31

T1

T3

T2

LV-SW2

BLK

WH

T

RED

OCCUPANCYSENSOR

BLK-GNDRED-24VDC

WHT-N.O.

BOS-315(SET TIMER TO MINIMUM)

RED

YEL

RED-24VDC

BLK-GND

YEL-SIGNAL

LIGHTSENSOR

BLK

LS24-I

SHIELD

REDBLK

SN+

+24VGND

SN-

BN

+

SHLD

BN

-

UI-1

+24VUI-2

GND

UI-4UI-3

+24V

UI-5GND

UI-6

GND+24V

UI-7

+24VUI-8

GND

UI-10UI-9

+24VGND

UI-11

+24VUI-12

GND

UI-14UI-13

+24V

UI-15GND

UI-

17

UI-

18

GN

D+2

4V

UI-

19

+24

VU

I-2

0

GN

D

UI-

22

UI-

21

+24

V

UI-

23

GN

D

UI-

24

GN

D+2

4V

GN

D+5

V

P2P1

P2P1

WH

TB

LK

+24VGND

UI-16R

ED

REDYE

L

BLK

RED

WH

T

BLK

(OUT)

(IN)

SHIELD

REDBLK

YELBLU

120V

277V

BLKBRN

WHT

GRN

BLK

WHT

CIRCUIT BREAKER 20A MAX

LINE

TO MSTP NETWORK

RPCB

Master BACnet Points List

Description Name Object Type ID

Analog Input ANALOG_INPUT_100ssxx ANALOG_VALUE 100ssxx

Digital Input DIGITAL_INPUT_100ssxx BINARY_VALUE 100ssxx

Load Status LOAD_STATUS_110ssxx BINARY_VALUE 110ssxx

Line Voltage Input LINE_VOLTAGE_INPUT_120ssxx BINARY_VALUE 120ssxx

Device nnnn_DEVICE_OBJECT_132aaa DEVICE 132aaa

Channel Status CHANNEL_STATUS_200zzcc BINARY_VALUE 200zzcc

Channel Level CHANNEL_LEVEL_201zzcc ANALOG_VALUE 201zzcc

Occupancy Timer Occupied Mode OCC_TIMER_OCC_MODE_210zzcc ANALOG_VALUE 210zzcc

Occupancy Timer Unoccupied Mode OCC_TIMER_UNOCC_MODE_211zzcc ANALOG_VALUE 211zzcc

Timer Unoccupied Mode TIMER_UNOCC_212zzcc ANALOG_VALUE 212zzcc

Timer Occupied Mode TIMER_OCC_213zzcc ANALOG_VALUE 213zzcc

Daylight Harvesting Setpoint DAY_HARVEST_SETPT_220zzcc ANALOG_VALUE 220zzcc

Run Command RUN_COMMAND_300zz00 BINARY_VALUE 300zz00

Schedule SCHEDULE_310zz00 SCHEDULE 310zz00

Occupied/Unoccupied Mode Source OCCUNOCC_MODE_SOURCE_330zzcc MULTISTATE_VALUE 330zzcc

Virtual Station On Off VS_ON_OFF_340tttb MULTISTATE_VALUE 340tttb

Virtual Station Indicator LED VS_BUTTON_INDICATOR_341tttb MULTISTATE_VALUE 341tttb

Virtual Station Level Set VS_LEVEL_SET_342tttb MULTISTATE_VALUE 342tttb

Note - BACnet Object ID and Object Name must be turned on with BRT Essentials

1 of 10


Product

b - Button or

Button Set zz -Zone cc - Channel ss - Slot

Station

ttt - Address

Device

aaa - Address

Device Name

nnnn - Name

Digital

Input

xx - Instance

Load Status

xx - Instance

Line Voltage

Input

xx - Instance

Analog

Input

xx - Instance

ZCSB NA 01 01 - 08 00 000 000 - 099 ZCSB 01 - 06 01 - 02 01 - 02 01 - 06

ZCSS NA 01 - 02 01 - 08 00 - 03 000 - 006 000 - 099 ZCSS 01 - 06 01 - 02 01 - 02 01 - 06

ZCDS NA 01 - 02 01 - 08 00 - 03 000 - 006 000 - 099 ZCDS 01 - 06 01 - 02 01 - 02 01 - 06

ZCDE NA 01 - 04 01 - 08 00 - 07 000 - 012 000 - 099 ZCDE 01 - 06 01 - 02 01 - 02 01 - 06

RPSB NA 01 - 64 01 - 08 00 000 000 - 099 RPSB 01 - 24 NA NA 01 - 24

RPSS NA 01 - 64 01 - 08 00 - 16 000 - 064 000 - 099 RPSS 01 - 24 NA NA 01 - 24

RPDS NA 01 - 64 01 - 08 00 - 16 000 - 064 000 - 099 RPDS 01 - 24 NA NA 01 - 24

RKUN NA 01 - 64 01 - 08 00 - 04 000 - 064 000 - 099 RKUN 01 - 24 NA NA 01 - 24

RKUS NA 01 - 64 01 - 08 00 - 04 000 - 064 000 - 099 RKUS 01 - 24 01 - 64 NA 01 - 24

SCSS NA NA NA NA NA NA NA 01 - 06 01 - 02 01 - 02 01 - 06

SCDS NA NA NA NA NA NA NA 01 - 06 01 - 02 01 - 02 01 - 06

MIO-AO08 NA NA NA NA NA NA NA NA NA NA NA

MIO-UI16 NA NA NA NA NA NA NA 01 - 16 NA NA 01 - 16

RP-FI1-C NA NA NA NA NA NA NA NA NA NA NA

RK-FI1-A NA NA NA NA NA NA NA 01 - 64 NA NA NA

LEXP32 NA NA NA NA NA NA NA 01 - 32 NA NA NA

CTS1CH 1 NA NA NA NA NA NA NA NA NA NA

CTS2CH 1 - 2 NA NA NA NA NA NA NA NA NA NA




CTS1RL 1 NA NA NA NA NA NA NA NA NA NA

CTS2RL 1 - 2 NA NA NA NA NA NA NA NA NA NA

CTS3PR 1 - 4 NA NA NA NA NA NA NA NA NA NA

CTS6PR 1 - 6 NA NA NA NA NA NA NA NA NA NA

2 of 10


Device Description Type Default Access

Object_Identifier BACnetObjectIdentifier 132aaa Read

Object_Name CharacterString nnnn_DEVICE_OBJECT_132aaa Read

Object_Type BACnetObjectType DEVICE Read

System_Status BACnetDeviceStatus Read

Vendor_Name CharacterStringBlue Ridge Technologies International,

LLCRead

Vendor_Identifier Unsigned16 132 Read

Model_Name CharacterString Read

Firmware_Revision CharacterString Read

Application_Software_Version CharacterString Read

Protocol_Version Unsigned Read

Protocol_Revision Unsigned Read

Protocol_Services_Supported BACnetServicesSupported Read

Protocol_Object_Types_Supported BACnetObjectTypesSupported Read

Object_List BACnetARRAY[N] of BACnetObjectIdentifier Read

Max_APDU_Length_Accepted Unsigned ?

Segmentation_Supported BACnetSegmentation NO_SEGMENTATION Read

Local_Time Time Read/Write

Local_Date Date Read/Write

UTC_Offset INTEGER Read/Write

Daylight_Savings_Status BOOLEAN Read/Write

APDU_Timeout Unsigned 6000 Read/Write

Number_Of_APDU_Retries Unsigned 3 Read/Write

Max_Master Unsigned (1..127) 99 Read/Write

Max_Info_Frames Unsigned 10 Read/Write

Device_Address_Binding BACnetList of BACnetAddressBinding Read

Database_Revision Unsigned Read

Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read

Digital Input Description Type Default Access

Object_Identifier BACnetObjectIdentifier 100ssxx Read

Object_Name CharacterString DIGITAL_INPUT_100ssxx Read

Object_Type BACnetObjectType BINARY_VALUE Read

Present_Value Any 0 Read

Status_Flags BACnetStatusFlags 0 Read

Event_State BACnetEventState NORMAL Read

Out_Of_Service BOOLEAN TRUE Read


Indicates the status of a binary input,

either on or off.

BACnet device object for the controller.

3 of 10


Load Status Description Type Default Access


Object_Name CharacterString LOAD_STATUS_110ssxx Read







Line Voltage Input Description Type Default Access


Object_Name CharacterString LINE_VOLTAGE_INPUT_120ssxx Read







Channel Status Description Type Default Access

Object_Identifier BACnetObjectIdentifier 200zzcc Read

Object_Name CharacterString CHANNEL_STATUS_200zzcc Read







Run Command Description Type Default Access

Object_Identifier BACnetObjectIdentifier 300zz00 Read

Object_Name CharacterString RUN_COMMAND_300zz00 Read


Present_Value Any 1 Read/Write




Priority_Array BACnetPriorityArray Read

Relinquish_Default BACnetBinaryPV 1 Read/Write


Indicates whether a given load relay is

open or closed. On indicates the relay

is closed. Off indicates the relay is

open.

Indicates the status of a line voltage

input, either on or off.

Indicates the status of a Channel, either

lights on or lights off.

Controls mode of operation. On is

when occupants are expected present.

Off when occupants are expected not

present.

4 of 10


Analog Input Description Type Default Access


Object_Name CharacterString ANALOG_INPUT_100ssxx Read

Object_Type BACnetObjectType ANALOG_VALUE Read





Units BACnetEngineeringUnits Read


Channel Level Description Type Default Access


Object_Name CharacterString CHANNEL_LEVEL_201zzcc Read






Units BACnetEngineeringUnits percent Read


Occupancy Timer Occupied Mode Description Type Default Access


Object_Name CharacterString OCC_TIMER_OCC_MODE_210zzcc Read






Units BACnetEngineeringUnits minutes Read




Indicates the status value of an analog

input. Units and range are configured

within BRT Essentials.

Timer value in minutes used to count

down time during occupied mode as

occupancy timer times out.

Indicates the lighting output level in %

for a channel.

5 of 10


Occupancy Timer Unoccupied Mode Description Type Default Access


Object_Name CharacterString OCC_TIMER_UNOCC_MODE_211zzcc Read










Timer Unoccupied Mode Description Type Default Access

Object_Indentifier BACnetObjectIdentifier 212zzcc Read

Object_Name CharacterString TIMER_UNOCC_212zzcc Read








Relingquish_Default BACnetBinaryPV 0 Read/Write


Timer Occupied Mode Description Type Default Access

Object_Indentifier BACnetObjectIdentifier 213zzcc Read

Object_Name CharacterString TIMER_OCC_213zzcc Read










Daylight Harvesting Setpoint Description Type Default Access


Object_Name CharacterString DAY_HARVEST_SETPT_220zzcc Read





down time during unoccupied mode as


Daylight harvesting setpoint in foot

candles.


down time when override is initiated by

the space occupant during Unoccupied

Mode.


down time when override is initiated by

the space occupant during Occupied

Mode.

6 of 10




Units BACnetEngineeringUnits foot candles Read




Daylight harvesting setpoint in foot

candles.

7 of 10


Schedule Description Type Default Access

Object_Identifier BACnetObjectIdentifier 310zz00 Read

Object_Name CharacterString SCHEDULE_310zz00 Read

Object_Type BACnetObjectType SCHEDULE Read


Effective_Period BACnetDateRange Read/Write

Weekly_Schedule BACnetARRAY[7] of BACnetDailySchedule Read/Write

Exception_Schedule BACnetARRAY[N] of BACnetSpecialEvent Read/Write

Schedule_Default Any 0 Read

List_Of_Object_Property_References BACnetLIST of BACnetDeviceObjectPropertyReference Read

Priority_For_Writing Unsigned (1..16) 16 Read

Status_Flags BACnetStatusFlags Read

Reliability BACnetReliability Read

Out_Of_Service BOOLEAN FALSE Read


Occupied/Unoccupied Mode Source Description Type Default Access


Object_Name CharacterString OCCUNOCC_MODE_SOURCE_330zzcc Read

Object_Type BACnetObjectType MULTISTATE_VALUE Read

Present_Value Unsigned 1 Read/Write




Number_Of_States Unsigned 3 Read

State_Text BACnetARRAY[N] of CharacterString

[1]Remote Command

[2]Local Schedule

[3]Remote with Local Schedule Fallback

Read


Relinquish_Default Unsigned 0 Read/Write


Controls mode of operation based on

schedule. On is when occupants are

expected present. Off when occupants

are expected not present.

Determines whether the Channel's

mode is determined by Remote

Command, Schedule or Remote

Command with Schedule Fallback. In

the later instance, Fallback is initiated

when the Remote Command is not

refreshed within 2 minutes.

8 of 10


Virtual Station On Off Description Type Default Access

Object_Identifier BACnetObjectIdentifier 340tttb Read

Object_Name CharacterString VS_ON_OFF_340tttb Read








[1]Toggle

[2]On

[3]Off

Read




Virtual Station Indicator LED Description Type Default Access


Object_Name CharacterString VS_BUTTON_INDICATOR_341tttb Read


Present_Value Unsigned 1 Read






[1]Off

[2]On

[3]Flash

[4]Dim

Read


This object provides indication as to

whether the Station Button should light

or unlight its indicator LED.

This commandable object is used to

either toggle the on/off state of the

channel, or to directly set the state to

either on or off. The purpose is to

allow the system designer to provide a

virtual on/off button from a BACnet

source other than a physical station.

9 of 10


Virtual Station Level Set Description Type Default Access


Object_Name CharacterString VS_LEVEL_SET_342tttb Read








[1]1 percent

[2]2 percent

…

[100]100 percent

[101]-5 percent change





[106}+1 percent change

[107]+2 percent change




Read




Note - Whether a given input is exposed as a BV or an AV is based on input

configuration.

This commandable object is used to

either set the channel light level

percentage directly, or to increment

the level up or down by a fixed

percentage. The purpose is to allow

the sytsem designer to provide

raise/lower functionality from a BACnet

source other than a physical station.

10 of 10

BACnet Protocol Implementation Conformance Statement

Page 1 of 7

Date: March 30, 2015

Vendor Name: Blue Ridge Technologies International

Product Name: Aperio

Product Model Number: ZC, RP, RK, RI

Application Software Version: NA Firmware Revision: 1.3.x BACnet Protocol Revision: 135-2010 rev. 12

Product Description:

The Aperio Controller Board is a general purpose lighting controller used across the Blue Ridge Technologies product line.

This product supports native BACnet connecting directly to the MS/TP LAN. All standard MS/TP baud rates are supported.

All B-AAC required objects are supported. The quantities of each object available are dependent upon factory configuration

since this Aperio Controller Board can be provided in products with differing lighting zone and channel capacities.

BACnet Standardized Device Profile (Annex L):

BACnet Operator Workstation (B-OWS)

BACnet Advanced Operator Workstation (B-AWS)

BACnet Operator Display (B-OD)

BACnet Building Controller (B-BC)

X BACnet Advanced Application Controller (B-AAC)

BACnet Application Specific Controller (B-ASC)

BACnet Smart Sensor (B-SS)

BACnet Smart Actuator (B-SA)

List all BACnet Interoperability Building Blocks Supported (Annex K): DS-RP-B, DS-RPM-B, DS-WP-B, DS-WPM-B,

DS-COV-B, DS-COVU-B, AE-N-I-B, AE-ACK-B, AE-INFO-B, SCHED-I-B, DM-DDB-B, DM-DOB-B, DM-DCC-B,

DM-TS-B, DM-UTC-B

Segmentation Capability:

Able to transmit segmented messages Window Size

Able to receive segmented messages Window Size

Standard Object Types Supported:

Objects are not creatable nor deletable using the CreateObject or the DeleteObject services.

Object/Property Support Matrix

The following table summarizes the Object Types/Properties supported:

Property

Object Type

Device Binary

Value

Analog

Value

Multi

State

Value

Schedule

Object_Identifier X X X X X

Object_Name X X X X X


Page 2 of 7

Object_Type X X X X X

System_Status X

Vendor_Identifier X

Model_Name X

Firmware_Revision X

Application_Software_Version X

Protocol_Version X

Protocol_Revision X

Protocol_Services_Supported X

Object_Types_Supported X

Object_List X

Max_APDU_Length_Accepted X

Segmentation_Supported X

Local_Time X

Local_Date X

UTC_Offset X

Daylight_Savings_Status X

APDU_Timeout X

Number_Of_APDU_Retries X

Max_Master X

Max_Info_Frames X

Device_Address_Binding X

Database_Revision X

Configuration_Files X

Last_Restore_Time X

Backup_Failure_Timeout X

Present_Value X X X X

Status_Flags X X X X

Event_State X X X

Out_Of_Service X X X

Number_Of_States X

Priority_Array X* X* X*

Relinquish_Default X* X* X*

Units X

Date_List

Effective_Period X

Weekly_Schedule X

Execption_Schedule X

Schedule_Default X

List_Of_Object_Property_Ref X

Priority_For_Writing X

Reliability X

Out_Of_Service X

Notification_Class X X

Event_Enable X X

Acked_Transitions X X

Notify_Type X X

Event_Time_Stamps X X

Time_Delay X X

Alarm_Value X

High_Limit X

Low_Limit X

Deadband X


Page 3 of 7

Limit_Enabled X

Property_List X X X X X

* For commandable values only.

Device Object Summary

The following table summarizes the Device Object supported (see Instance Key for values of nnnn and aaa):

Instance ID Object Name

132aaa nnnn_DEVICE_OBJECT_132aaa

Binary Value Instance Summary

The following table summarizes the Binary Value Objects supported (see Instance Key for values of ss, xx, zz and cc):

Instance ID Object Name Description

Present

Value

Access

Type

100ssxx DIGITAL_INPUT_100ssxx Indicates the status of a binary input, either on or off.

R

110ssxx LOAD_STATUS_110ssxx

Indicates whether a given load relay is

open or closed. On indicates the relay

is closed. Off indicates the relay is

open.

R

120ssxx LINE_VOLTAGE_INPUT_120ssxx Indicates the status of a line voltage

input, either on or off. R

200zzcc CHANNEL_STATUS_200zzcc Indicates the status of a Channel, either

lights on or lights off. R

300zz00 RUN_COMMAND_300zz00

Controls mode of operation. On is

when occupants are expected present.

Off when occupants are expected not

present.

C

NOTE: For Present Value Access Types, R = Read-only, W = Writeable, C = Commandable. Commandable values support

priority arrays and relinquish defaults.

Analog Value Instance Summary

The following table summarizes the Analog Value Objects supported (see Instance Key for values of ss, xx, zz and cc):

Instance ID Object Name Description Units

Present

Value

Access

Type

100ssxx ANALOG_INPUT_100ssxx Indicates the status value of

an analog input. R

201zzcc CHANNEL_LEVEL_201zzcc Indicates the lighting output

level for a channel. Percent

210zzcc OCC_TIMER_OCC_MODE_210zzcc

Timer value used to count

down time during occupied

mode as occupancy timer

Minutes C


Page 4 of 7

times out.

211zzcc OCC_TIMER_UNOCC_MODE_211zzcc

Timer value used to count

down time during

unoccupied mode as


Minutes C

212zzcc TIMER_UNOCC_212zzcc

Timer value in minutes

used to count down time

when override is initiated

by the space occupant

during Unoccupied Mode.

Minutes C

213zzcc TIMER_OCC_213zzcc

Timer value in minutes

used to count down time

when override is initiated

by the space occupant

during Occupied Mode.

Minutes C

220zzcc DAY_HARVEST_SETPT_220zzcc Daylight harvesting

setpoint.

Foot

Candles C



Schedule Instance Summary

The following table summarizes the Schedule Objects supported (see Instance Key for values of zz):


Date_List

Access

Type

310zz00 SCHEDULE_310zz00 Schedules to be assigned to

lighting zones. W



Occupied/Unoccupied Mode Source Instance Summary

The following table summarizes the Occupied/Unoccupied Mode Sources supported (see Instance Key for values of zz and

cc):


Date_List

Access

Type

330zzcc OCCUNOCC_MODE_SOURCE_330zzcc Occupied/Unoccupied mode C



Virtual Station Instance Summary

The following table summarizes the Virtual Stations supported (see Instance Key for values of ttt and b):

Instance ID Object Name Description Date_List

Access


Page 5 of 7

Type

340tttb VS_ON_OFF_340tttb Virtual Station On/Off C

341tttb VS_BUTTON_INDICATOR_341tttb Virtual Station Indicator LED R

342tttb VS_LEVEL_EST_342tttb Virtual Station Level Set C



Instance Key

The following tables provide range of values exposed in BACnet Object IDs and Object Names by Product:

Product zz -Zone

cc -

Channel ss - Slot

Device

aaa -

Address

Device

Name

nnnn -

Name

ZCSB 01 01 - 08 00 000 - 099 ZCSB

ZCSS 01 - 02 01 - 08 00 - 03 000 - 099 ZCSS

ZCDS 01 - 02 01 - 08 00 - 03 000 - 099 ZCDS

ZCDE 01 - 04 01 - 08 00 - 07 000 - 099 ZCDE

RPSB 01 - 64 01 - 08 00 000 - 099 RPSB

RPSS 01 - 64 01 - 08 00 - 16 000 - 099 RPSS

RPDS 01 - 64 01 - 08 00 - 16 000 - 099 RPDS

RKUN 01 - 64 01 - 08 00 - 16 000 - 099 RKUN

RKUS 01 - 64 01 - 08 00 - 16 000 - 099 RKUS

Product

Digital

Input

xx -

Instance

Load

Status

xx -

Instance

Line

Voltage

Input

xx -

Instance

Analog

Input

xx -

Instance

ZCSB 01 - 06 01 - 02 01 - 02 01 - 06

ZCSS 01 - 06 01 - 02 01 - 02 01 - 06

ZCDS 01 - 06 01 - 02 01 - 02 01 - 06

ZCDE 01 - 06 01 - 02 01 - 02 01 - 06

RPSB 01 - 24 NA NA 01 - 24

RPSS 01 - 24 NA NA 01 - 24

RPDS 01 - 24 NA NA 01 - 24

RKUN 01 - 24 NA NA 01 - 24

RKUS 01 - 24 NA NA 01 - 24

SCSS 01 - 06 01 - 02 01 - 02 01 - 06

SCDS 01 - 06 01 - 02 01 - 02 01 - 06

LEXP32 01 - 32 NA NA NA

Product

b – Button

or Button

Set

CTS1CH 1

CTS2CH 1 - 2

CTS3CH 1 - 3

CTS4CH 1 - 4


Page 6 of 7

CTS6CH 1 - 6

CTS1RL 1

CTS2RL 1 - 2

CTS3PR 1 - 4

CTS6PR 1 - 6

Data Link Layer Options:

BACnet IP, (Annex J)

BACnet IP, (Annex J), Foreign Device

ISO 8802-3, Ethernet (Clause 7)

ATA 878.1, 2.5 Mb. ARCNET (Clause 8) ATA 878.1, EIA-485 ARCNET (Clause 8), baud rate(s) ____________

X MS/TP master (Clause 9), baud rate(s): 9600, 19200, 38400, 57600, 76800, 115200

MS/TP slave (Clause 9), baud rate(s):

Point-To-Point, EIA 232 (Clause 10), baud rate(s):

Point-To-Point, modem, (Clause 10), baud rate(s):

LonTalk, (Clause 11), medium: __________

BACnet/ZigBee (ANNEX O)

Other:

Device Address Binding:

Is static device binding supported? (This is currently necessary for two-way communication with MS/TP slaves and certain

other devices.) Yes X No

Networking Options:

Router, Clause 6 - List all routing configurations, e.g., ARCNET-Ethernet, Ethernet-MS/TP, etc.

Annex H, BACnet Tunneling Router over IP

BACnet/IP Broadcast Management Device (BBMD)

Does the BBMD support registrations by Foreign Devices? Yes No

Does the BBMD support network address translation? Yes No

Network Security Options:

X Non-secure Device - is capable of operating without BACnet Network Security

Secure Device - is capable of using BACnet Network Security (NS-SD BIBB)

Multiple Application-Specific Keys:

Supports encryption (NS-ED BIBB)

Key Server (NS-KS BIBB)

Character Sets Supported:

Indicating support for multiple character sets does not imply that they can all be supported simultaneously.

X ISO 10646 (UTF-8) IBM/Microsoft DBCS ISO 8859-1


Page 7 of 7

ISO 10646 (UCS-2) ISO 10646 (UCS-4) JIS X 0208

If this product is a communication gateway, describe the types of non-BACnet equipment/networks(s) that the

gateway supports:

_______________________________________________________________________________________________

_______________________________________________________________________________________________

_______________________________________________________________________________________________