(Page.1/12) Service Bulletin Ref. No. A3HM-2018 (I021) …mserviceportal.kdkr.co.kr/Service Bulletin/SB/2018 year/4... · 2018. 4. 16. · Ver.0 Revised contents 8 Update:

(Page.1/12)

Service Bulletin Ref. No. A3HM-2018 (I021) [Parts Change Information] April 3, 2018

KYOCERA Document Solutions Inc.

A B C

Subject: Parts Change Information

A3HM Model:

TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci, TASKalfa 4052ci,TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i, P8060cdn TASKalfa 8052ci, TASKalfa 7052ci, TASKalfa 8002i, TASKalfa 7002i TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i, TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3501ci, TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i, TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i, TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci, TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i,

FS-C8650DN, FS-C8600DN,

DP-7100, DP-7110, DP-7120, DP-770/DP-770(B), DP-771, DP-772,

DT-730/DT-730(B), PF-7100, PF-7110, PF-7120, PF-730/PF-730(B),

PF-740/PF-740(B), PF-770, PF-780/PF-780(B), DF-7100, DF-7110,

DF-7120, DF-770/DF-770(B)/DF-770(C)/DF-770(D),

DF-790/DF-790(B)/DF-790(C), BF-730, MT-730/MT-730(B),

PH-7100/7110/7120/7130, PH-7A/7B/7C/7D, JS-730, JS-731, JS-732,

FAX System 12, FAX System(V), FAX System(W), AK-7100, AK-730,

AK-735, AK-731, AK-736, Printing System 15 Subject Refer to the last page for the affected model list of the enhancement unit or the option.

Revised

contents Ver.08

Update: Add new contents of Ver. 02.

Based on this change, add/correct the contents of the top page, and change whole layout.

Index: (Ver.02) P3 ChangeVer2_P1 of FILTER TOP

TASKalfa 9002i, TASKalfa 8002i, TASKalfa 7002i P4 Change of the developer unit

TASKalfa 8001i, TASKalfa 6501i, TASKalfa 8000i, TASKalfa 6500i, TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i, TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i, TASKalfa 8002i, TASKalfa 7002i, TASKalfa 9002i

P5 Change of SHIELD GASKET in the lens unit

TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i

P5 (KDTW) TK-6720 Add Taiwan Green Mark Label

TASKalfa 9002i, TASKalfa 8002i, TASKalfa 7002i P6 (KDTW) Add Taiwan Energy Mark Certification Label/Taiwan Green Mark Label

TASKalfa 8002i, TASKalfa 7002i

file:///C:/Users/kr00113/Desktop/SB/A3HM_2018_SB_ver.02/I021_A3HM_2018_SB_ver.02.docx%23Ver2_P1

(Page.2/12)



A B C

Index: (Ver.02) P6 Change of the packing style when supplying the Hanarl in the field

TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i

P7 Part number information (DP feed belt shaft A)

TASKalfa 8052ci, TASKalfa 7052ci, TASKalfa 9002i, TASKalfa 8002i, TASKalfa 7002i, TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i, TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i, DP-7110, DP-772, DP-771

P7 Change of the PLATE EARTH PWB shape

AK-7100 (Ver.01) P8 Change the length of SHAFT EXIT at the DP exit section

TASKalfa 8052ci, TASKalfa 7052ci, TASKalfa 8002i, TASKalfa 7002i, TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i, DP-772, DP-7110

P8 Change the caution label of the toner disposal tank

TASKalfa 8052ci, TASKalfa 7052ci, TASKalfa 8002i, TASKalfa 7002i P9-10 Parts number informaiton

TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i, P8060cdn

P10 (KDTW) Add Taiwan Energy Mark Label

TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i

(Page.3/12)



A B C

(Ver.02-P1; 2018/03)

Subject: Change of FILTER TOP

Model: TASKalfa 9002i, TASKalfa 8002i, TASKalfa 7002i

Implementation:

TASKalfa 9002i, 120V/220-240V/KDTW specification Maintenance kit MK-6725: From first production KDKR/KDCN specification Maintenance kit MK-6725: From possible timing of March 2018 production

* Main unit TASKalfa 8002i/7002i uses the old FILTER TOP continuously

Support for the standard (*1) on TASKalfa 9002i, change the material of the filter section of FILTER TOP (No.1). Based on this change, maintenance kit MK-6725 which is common with TASKalfa 8002i/7002i will be also changed. New FILTER TOP x 3pcs are included in the MK- MK-6725F (120V), MK-6725G (220-240V) and MK-6725 (KDTW) for TASKalfa 9002i from the first production. *1: Conform to the European new BAM and USA EPEAT (Physical Emission Standard)

No. Old Part

No. New Part

No. Description

Q’ ty Com

bi pati lity Remarks

Old New Old New

1 302K324460 303R829010 SHAFT EXIT 1 1 O O

Note: User new FILTER TOP for TASKalfa 9002i.

N00100807; No.12838; N00100807; N00101478; A3HM _IPCI No.000429

(Page.4/12)



A B C

(Ver.02-P2; 2018/03)

Subject: Change of developer unit

Model:

TASKalfa 8001i, TASKalfa 6501i, TASKalfa 8000i, TASKalfa 6500i, TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i, TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i, TASKalfa 8002i, TASKalfa 7002i, TASKalfa 9002i

Implementation: TASKalfa 9002i: From first production Other than TASKalfa 9002i: From February 2018 production

To improve the sealing level, affix the sponge on the lower duct of the developer unit

No. Old Part

No. New Part

No. Description

Q’ ty Com


Old New Old New

1 302N793060 302N793061 DV-6706 1 1 O O *1 (Except KDCN/KDKR)

2 302N79C060 302N79C061 DV-6706(CN) 1 1 O O *1 (KDCN)

3 302N79K061 302N79K062 DV-6706(KR) 1 1 O O *1 (KDKR)

4 302LF93034 302LF93035 DV-6705 1 1 O O *2 (Except KDCN/KDKR)

5 302LF9C034 302LF9C035 DV-6705 1 1 O O *2 (KDCN)

6 302LF9K035 302LF9K036 DV-6705(KR) 1 1 O O *2 (KDKR)

7 302LH93034 302LH93035 DV-6305 1 1 O O *3 (Except KDCN/KDKR)

8 302LH9C034 302LH9C035 DV-6305 1 1 O O *3 (KDCN)

9 302LH9K035 302LH9K036 DV-6305(KR) 1 1 O O *3 (KDKR)

10 302NJ93010 302NJ93011 DV-6720 1 1 *6 O *4 (Except KDCN/KDKR)

11 302NJ9C010 302NJ9C011 DV-6720(CN) 1 1 O O *5 (KDCN)

12 302NJ9K010 302NJ9K011 DV-6720(KR) 1 1 O O *5 (KDKR)

*1: TASKalfa 8001i/6501i


*3: TASKalfa 5501i/4501i/3501i, TASKalfa 5500i/4500i/3500i

*4: TASKalfa 8002i/7002i, TASKalfa 9002i


*6: Use new developer unit for TASKalfa 9002i

N00101196; No.13034; A3HM _IPCI No.000428

Developer unit (Right drawing is the condition that lower duct is separated)

X

[Arrow view X]

Add sponge

(Page.5/12)



A B C

(Ver.02-P3; 2018/03)

Subject: Change of SHIELD GASKET in the lens unit

Model: TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i

Implementation: After using up the old stock

For easy part procurement, change the measurement of SHIELD GASKET (No.1) attached in the cover of the lens unit. (Before) 7x7x15mm (After) 7x7x13mm

Old Part

No. New Part

No. Description

Q’ ty Com


Old New Old New

1 7ZGSSTG77015H01 7ZGSTGZ77013H01 SHIELD GASKET 1 1 O O

N00099709; A3HM_IPCI No.000402

Subject: (KDTW) TK-6720 Add Taiwan Green Mark Label

Model: TASKalfa 9002i, TASKalfa 8002i, TASKalfa 7002i

Implementation: From April 2018 production

In accordance with obtaining the certificate of Taiwan Green Mark, affix the Taiwan Green Mark label on the individual box of the toner kit TK-6720 (1T02NJ0TW0)

N00099709; A3HM_IPCI No.000402

Change SHIELD GASKET (No.1)

(Page.6/12)



A B C

(Ver.02-P4; 2018/03)

Subject: (KDTW) Add Taiwan Energy Mark Certification Label/Taiwan Green Mark Label

Model: TASKalfa 8002i, TASKalfa 7002i

Implementation: From April 2018 production

To conform Taiwan Energy Mark Certification and also in accordance with obtaining the certificate of Taiwan Green Mark, affix the following label on the right front section of the main unit. - Taiwan Energy Mark Certification Label - Taiwan Green Mark Label

N00101426; A3HM_IPCI No.000438

Subject: Change of the packing style when supplying the Hanarl in the field

Model: TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i

Implementation: From possible timing of February 2018 production

To make easy shipment work, the packing style of 10pcs of small bottles (10g of Hanarl) (No.1) is changed from packing in the box to bagging. (Before) (After)

No. Old Part

No. New Part

No. Description

Q’ ty Com


Old New Old New

1 302LV94550 302LV94550 PARTS GREASE HANARL KS-39M(10G) SP

1 1 O O No part number change

* Basic ordering unit:: No.1 x 190pcs

N00100883; A3HM_A4BW _IPCI No.000421

[Taiwan Green Mark Labe]

[Taiwan Energy Mark Certification Label]

(Page.7/12)



A B C

(Ver.02-P5; 2018/03)

Subject: Part number information (DP feed belt shaft A)

Model:

TASKalfa 8052ci, TASKalfa 7052ci, TASKalfa 9002i, TASKalfa 8002i, TASKalfa 7002i, TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i, TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i, DP-7110, DP-772, DP-771

Implementation: Service parts information only。

Set DP feed belt shaft A (No.1) as a service part in the field.

No. Old Part

No. New Part

No. Description

Q’ ty Com


Old New Old New

1 ---------- 303M407070 SHAFT PF - 1 - O

* Basic ordering unit:: No.1 x 190pcs

201802RPS; A3HM_A3LM_IPCI No.000440

Subject: Change of the PLATE EARTH PWB shape

Model: AK-7100

Implementation: From possible timing of February 2018 production

For common use of the parts, add a round hole in the PLATE EARTH PWB (No.1).

No. Old Part

No. New Part

No. Description

Q’ ty Com


Old New Old New

1 303RG02240 303RG02241 PLATE EARTH PWB 1 1 O O

N00100136; A3HM _IPCI No.000410

No1

Extract from TASKalfa 7551ci/6551ci service manual

DP feed belt shaft A (No.1)

** FIG no. of each product parts list:

・TASKalfa 8052ci/7052ci: FIG. 59 Paper Feed Section 2(DP) ・TASKalfa 9002i/8002i/7002i: FIG. 56 Paper Feed Section 2(DP) ・TASKalfa 7551ci/6551ci, TASKalfa 7550ci/6550ci: FIG. 43 Paper Feed Section 2(DP) ・TASKalfa 8001i/6501i, TASKalfa 8000i/6500i: FIG. 41 Paper Feed Section 2(DP) ・DP-7110/DP-772/DP-771: FIG.6 Paper Feed Section 2

Add a round hole (Diameter (4mm)

(Page.8/12)



A B C

(Ver.01-P1; 2018/01)

Subject: Change the lenght of SHAFT EXIT at the DP exit section

Model: TASKalfa 8052ci, TASKalfa 7052ci, TASKalfa 8002i, TASKalfa 7002i, TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i, DP-772, DP-7110

Implementation: From the possible timing of October 2017 production For improving the assembly capability, shorten SHAFT EXIT (No.1) and avoid the interference with the DP upper exit guide (Before) 111.00mm (After) 110.5mm

No. Old Part

No. New Part

No. Description

Q’ ty Com


Old New Old New

1 302K324460 303R829010 SHAFT EXIT 1 1 O O

N00098914; A3HM_A3LM_IPCI No. 000378

Subject: Change the caution label of the toner disposal tank

Model: TASKalfa 8052ci, TASKalfa 7052ci, TASKalfa 8002i, TASKalfa 7002i Implementation: After using up the old stock For common use, the design of the caution label affixed on the toner correction tank (No.1) is changed as follows.

No. Old Part

No. New Part

No. Description

Q’ ty Com


Old New Old New

1 302NH94080 302NH94081 PARTS DISPOSAL UNIT(M3) SP 1 1 O O

Use the new parts in the next development 90PPM model

N00100301; A3HM_IPCI No.000400

[Viewing DP exit section from the bottom] (Some parts are not described)

[Side of machine inside the toner disposal tank]

Add model name of the next development 90PPM model

(Page.9/12)



A B C

(Ver.01-P2; 2018/01)

Subject: Parts number information

Model: TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i, P8060cdn

Implementation: Service parts information only Set the following parts (No.1 to 3, 6, 7) as the service part in the field. FIG. 9 Paper Cassette 1 FIG. 22 Scanner Section 2 (MFP model) FIG.33 Drive Section 2

No. Old Part

No. New Part

No. Description

Q’ ty Com


Old New Old New

FIG. 9

1 ---------- 302K909260 PAD BOTTOM - 1 - O *1

2 ---------- 302ND09470 GUIDE ENVELOPE

- 1 - O *1

3 ---------- 302ND09480 ARM ENVELOPE

- 2 - O *1

FIG. 22 *MFP model

4 302RH94150 302RH94150 PARTS CONTACT-GLASS ASSY(I) SP

1 1 O - Inch specification

5 302RH94160 302RH94160 PARTS CONTACT-GLASS ASSY(C) SP

1 1 O - Metric specification

6 ---------- 303LL02500 +SHEET GLASS - 1 - O Component part of No4,5

FIG. 33

(Extract from the service manual)

No2

No1 No3

No3

Envelope feed guide (No.1 to 3)

No6

Ref.22 (No.4, 5)

(Color model) (Monochrome model)

No7 No7

(Page.10/12)



A B C

7 ---------- 302ND15430 GEAR Z23S CONTAINER JOINT

- *2

"+" mark at the beginning of the part name means it is a component part.

*1: Envelop feed guide (Assy of No.1 to 3) is stored in cassette 1. It is not the component part of cassette (CT-8550) for the

service part

*2: Use 2 pcs for the color model, 1 pc for the monochrome model

201706RPS; 201710RPS(FIG32); 201711RPS(FIG22); A3HM_IPCI No.000404

(Ver.01-P3; 2018/01)

Subject: (KDTW) Add Taiwan Energy Mark Label

Model: TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i

Implementation: KDTW: From January 2018 production KDTW GSA: From February 2018 production

In accordance with obtaining the certificate of Taiwan Energy Mark, affix the Taiwan Energy Mark Label on the front side of the main unit [Taiwan Energy Mark Label (Addition)]

N00100415; A3HM _IPCI No.000414

(Page.11/12)



A B C

[Affected Model list]

Product name Affected model

DP-7100

DP-7110

TASKalfa 4012i/3212i, TASKalfa 3511i/3011i, TASKalfa 3252ci/2552ci,

TASKalfa 6052ci/5052ci/4052ci/3552ci, TASKalfa 6002i/5002i/4002i

DP-7120 TASKalfa 4012i/3212i, TASKalfa 3511i/3011i, TASKalfa 3252ci/2552ci

DP-770/DP-770(B)

TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i,


TASKalfa 2551ci, TASKalfa 3510i/3010i

DP-771 TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i

DP-772 TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i, TASKalfa 2551ci,

TASKalfa 3510i/3010i

DT-730 TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i

DT-730(B)

TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i, TASKalfa 2551ci, TASKalfa 4012i/3212i, TASKalfa 3511i/3011i, M6030cdn, M6530cdn, M6035cidn, M6535cidn, P6130cdn, P6035cdn, P7040cdn, TASKalfa 350ci, M6635cidn, M6235cidn, M6630cidn, M6230cidn, P7240cdn, P6235cdn, P6230cdn, TASKalfa 351ci

PF-7100

PF-7110

TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci, TASKalfa 6002i/5002i/4002i,

P8060cdn

PF-7120 TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci, TASKalfa 6002i/5002i/4002i,

TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i, P8060cdn

PF-7130 TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i

PF-730/PF-730(B)

PF-740/PF-740(B)

TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 8000i/6500i,

TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN,

TASKalfa 7551ci/6551ci, TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 8001i/6501i,

TASKalfa 5501i/4501i/3501i, TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i

PF-770 TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 8000i/6500i,

TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN

PF-780/PF-780(B) TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci, TASKalfa 8000i/6500i, FS-C8650DN,

FS-C8600DN, TASKalfa 7551ci/6551ci, TASKalfa 5551ci/4551ci, TASKalfa 8001i/6501i

DF-7100 TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci, TASKalfa 6002i/5002i/4002i

DF-7110 TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci, TASKalfa 6002i/5002i/4002i,

TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i, P8060cdn

DF-7120 TASKalfa 3511i/3011i, TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci, TASKalfa 6002i/5002i/4002i, P8060cdn, TASKalfa 4012i/3212i

DF-770 TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i

DF-770(B)/DF-770(C) TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i, FS-C8650DN,

FS-C8600DN, TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i

DF-770(D)

TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i, FS-C8650DN,

FS-C8600DN, TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i,

TASKalfa 2551ci, TASKalfa 3510i, TASKalfa 3010i

DF-790 TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci,

TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i

DF-790(B)/DF-790(C)

TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci,

TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN,

TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i, TASKalfa 7551ci/6551ci,

TASKalfa 8001i/6501i

AK-7100

DF-7110/DF-7120 (Main body): TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci,

TASKalfa 6002i/5002i/4002i, TASKalfa 8052ci/7052ci,

TASKalfa 8002i/7002i, P8060cdn）

AK-730 DF-770/DF-770(B)/DF-770(C)/DF-770(D), DF-790/DF-790(B)/DF-790(C)

(Main body: TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i)

AK-735 DF-770(B)/DF-770(C)/DF-770(D), DF-790(B)/DF-790(C) (Main body: FS-C8650DN, FS-C8600DN)

AK-731 DF-770(C)/DF-770(D), DF-790(C)

(Main body: TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i)

AK-736 MT-730(B) (Main body: FS-C8650DN, FS-C8600DN,

TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i)

(Page.12/12)



A B C

Product name Affected model

BF-730

DF-790/DF-790(B)/DF-790(C)

(Main body: TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci,

TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN)

DF-7110 (Main body: TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci,

TASKalfa 6002i/5002i/4002i, TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i,

P8060cdn)

MT-730

DF-790/DF-790(B)


TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i)

MT-730(B)

DF-790/DF-790(B)/DF-790(C)


TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN)

DF-791 (Main body: TASKalfa 3510i/3010i, TASKalfa 3511i/3011i, TASKalfa 4012i/3212i)



P8060cdn)

PH-7100/7110/7120/

7130

DF-7100


TASKalfa 6002i/5002i/4002i)

PH-7A/7B/7C/7D

DF-770/DF-770(B)/DF-770(C)/DF-770(D)

(Main body: TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i, FS-C8650DN,

FS-C8600DN, TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i,

TASKalfa 2551ci, TASKalfa 3510i/3010i)

DF-790/DF-790(B)/DF-790(C)


TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN,


TASKalfa 7551ci/6551ci, TASKalfa 8001i/6501i)

DF-791 (Main body: TASKalfa 3510i/3010i, TASKalfa 3511i/3011i, TASKalfa 4012i/3212i)



P8060cdn)

DF-7120

(Main body: TASKalfa 3511i/3011i, TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci,

TASKalfa 6002i/5002i/4002i, P8060cdn, TASKalfa 4012i/3212i)

JS-730/JS-731/JS-732 TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i

FAX System 12

TASKalfa 4012i/3212i, TASKalfa 3511i/3011i, TASKalfa 3252ci/2552ci,

TASKalfa 6052ci/5052ci/4052ci/3552ci,

TASKalfa 6002i/5002i/4002i, TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i

FAX System(V) TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 8000i/6500i,

TASKalfa 5500i/4500i/3500i

FAX System(W) TASKalfa 2550ci, TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i

TASKalfa 2551ci, TASKalfa 3510i/3010i

Printing System 15 TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci,

TASKalfa 6002i/5002i/4002i

Printing System 16 TASKalfa 8052ci/7052ci

Documents

(Page.1/12) Service Bulletin Ref. No. A3HM-2018 (I021) …mserviceportal.kdkr.co.kr/Service Bulletin/SB/2018 year/4... · 2018. 4. 16. · Ver.0 Revised contents 8 Update: