Embed Size (px)
Citation preview
Pagina: 1/ 4
Material safety data sheet CE regulation 1907/2006 – REACH
Date of printing 27/03/2015
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY
Substance: FASCIA ANTICONDENSA
Product description: BITUMINOUS MEMBRANES. Company:
2. HAZARDS IDENTIFICATION Acute Health Effects: Direct contact with eyes or skin may cause mild irritation Long-term effects: Repeated contact with skin may cause sensitization Classification of the substance and mixture: The product is not subject to classification according to EC Directives. Label elements: In accordance with Reg. 1272/2008 / EC (CLP) The product does not need to be labeled in accordance with GHS criteria. In accordance with Directive 67/548 / EEC or 1999/45 / EC In accordance with Directive 67/548 / EEC, Annex VI: the product does not need to be labeled according to EC directives. Possible Hazards (according to Directive 67/548 / EC or 1999/45 / EC): No particular hazards known. Other hazards: PBT / vPvB evaluation: According to Annex XIII of Regulation (EC) N.1907 / 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH): Does not meet the criteria for classification as PBT (persistent / bioaccumulative / toxic ) or vPvB (very persistent / very bioaccumulative).
3. COMPOSITION/INFORMATION OF INGREDIENTS
In the formulation of the preparation are used substances not classified as dangerous according to Directive 67/548 / EEC and Regulation (EC) 1272/2008 (CLP). Substance: bitumen CAS 8052-42-4 EINECS 232-490-9 % Weight: 45-55%
BITUMINOUS CONGLOMERATE INSULATION TAPE
L'ISOLANTE K-FLEX SPAVia Leonardo da Vinci, 3620877 RONCELLO (MB) - ItalyTel. +39 039 6824.1
Competent person responsible for the safety data sheet:[email protected]
Emergency telephone number:Tel. +39 039 6824.1 (9:00 - 17:00)
Pagina: 2/ 4
Material safety data sheet CE regulation 1907/2006 – REACH
Date of printing 27/03/2015
4. FIRST AID MEASURES Eye contact: Flush with water for 15 minutes. Get medical attention if irritation occurs. Skin Contact: Remove from skin and wash with soap and water. If it is difficult to remove, use mineral spirits. Get medical attention if irritation occurs. Inhalation: Not applicable. Ingestion: Do not induce vomiting. Call a physician immediately.
5. FIRE-FIGHTING MEASURES
Extinguishing Media: For small fires: Use CO2, water spray. For larger fires: use foam, dry chemical or water spray Unsuitable extinguishing agents: None Special hazards arising from the substance or mixture: Thermal decomposition of this product during fire or very high heat conditions may evolve to: carbon monoxide, carbon dioxide and isobutene. Advice for firefighters: Breathing apparatus and protective clothing should be worn in fighting large fires. Determine the need to evacuate or isolate the area according to your local emergency plan. Use water spray to keep containers cool.
6. ACCIDENTAL RELEASE MEASURES Personal precautions, environmental precautions and clean-up methods: Wipe or scrape and hold for recovery or disposal.
7. HANDLING AND STORAGE
Handling: Wash thoroughly after use Storage conditions: Normal conditions of warehouse are acceptable. There are no special requirements for storage.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
CAS NUMBER Substance name exposure limits 8052-42-4 bitumen TWA: 5 mg/m3 (fumi) Exposure controls Engineering controls: the local and general ventilation are recommended. Individual protection measures Eye protection: you need to wear safety glasses. Skin protection: Use gloves. Wash hands during and after use. Gloves: cotton, nitrile rubber, natural rubber, neoprene. Personal protection - Respiratory: Under normal conditions of use it is not necessary the use of specific means of respiratory protection. Where concentrations are above recommended limits or are unknown, must be worn proper respiratory protection. Follow the OSHA respirator regulations (29 CFR 1910.134) and use NIOSH / MSHA respirators.
BITUMINOUS CONGLOMERATE INSULATION TAPE
Pagina: 3/ 4
Material safety data sheet CE regulation 1907/2006 – REACH
Date of printing 27/03/2015
9. PHYSICAL AND CHEMICAL PROPERTIES
Form: Solid, extruded tape Color: Black Odor: weak, mild odor Specific weight: 0.99 g / cm3 Viscosity: Not determined Freezing / melting point: Not determined Boiling Point: Not determined Vapor pressure at 25 ° C: Not determined Solubility in Water: Not determined pH: Not determined Volatile Content: <1% by weight Flash Point: Not applicable Auto ignition temperature: Not determined Flammability Limits in Air: Not determined
11. TOXICOLOGICAL INFORMATION
Potential Health Effects: No information
10. STABILITY AND REACTIVITY Chemical stability: Stable Hazardous Polymerization: Hazardous polymerization will not occur. Conditions to avoid: None. Materials to avoid: Avoid contact with strong oxidants.
12. ECOLOGICAL INFORMATION Environmental effects: Complete information is not yet available. Effects on wastewater treatment: Complete information is not yet available.
13. DISPOSAL CONSIDERATIONS The material is not classified as hazardous waste. State or local laws may impose additional regulatory requirements regarding disposal.
BITUMINOUS CONGLOMERATE INSULATION TAPE
Pagina: 4/ 4
Material safety data sheet CE regulation 1907/2006 – REACH
Date of printing 27/03/2015
.
14. TRANSPORT INFORMATION
ADR: Not subject to regulations By sea (IMDG): Not subject to the IMDG Code. By air (IATA): Not subject to IATA regulations.
15. REGULATORY INFORMATION
In accordance with the requirements of d.leg.vo July 16, 1998 No. 285 (and Directive 1999/45 / EC) the products do not require specific label Hazard: SYMBOLS OF DANGER: NOT REQUIRED CONTAINS: Not required evidence of components - (does not contain substances classified as hazardous) Phrases: ---- ---- Phrases: ---- ---- Reference should be made, where applicable, also to the following laws regarding safety Labour: - D.P.R.- 303/1956 - D.L.- 277/1991 - D.L.- 626/1994 - D. L. 25/2002 - D.L.- 242/1996
16. OTHER INFORMATION The information contained in this safety data sheet are based on our current knowledge and is provided in accordance with the requirements of Directives 2001/60 / EC, 2001/59 / EC, 2001/58 / EC. The product should not be used for purposes other than those listed in paragraph 1) without
obtaining written handling instructions. Do not assume responsibility for improper use. It 's always the user's responsibility to comply with hygiene, safety and environmental protection work laws. The information contained in this MSDS is meant as a description of product characteristics for safety purposes: not be considered as a guarantee of properties of the product itself.
BITUMINOUS CONGLOMERATE INSULATION TAPE
