Pallet Conveyor System · New modular pallet conveyor from SHS Ltd The new modular pallet conveyor comprises of heavy duty chain conveyor, roller conveyor, chain transfer and turntable

New modular pallet conveyor from SHS LtdThe new modular pallet conveyor comprises of heavy duty chain conveyor, roller conveyor, chain transfer and turntable modules. The flexible pallet con-veyor system is designed to handle the full range of Euro-pallet sizes as well as the popular Chep type 1200 x 1000mm pallet, with loads up to 1500Kg.

Roller Conveyor StraightA robust pallet roller conveyor system. Rollers are driven tangentially by 5/8” chain in a fully en-closed side channel. The systems offers mini-mal backlash, easy tensioning and a 150mm roller pitch. With a load capacity of 1500kg per pallet the straight modules are available to han-dle upto 4500kg total conveyor load.

Tangential chain drive4 mm thick side channels.3 and 5 mm thick roller options.Chain tensioning done quickly without re-moving guards.150mm roller pitch.

Chain Conveyor Straight3/4” pitch flat sided linked chain provides a strong supporting surface to convey pallets up to 1500kg. These modules are available in two and three chain versions. Chain tensioning is quick and easy with no requirement to remove any guards.

1500kg pallet load capacity4-mm thick side channels.¾”pitch flat sided chain running on low fric-tion, hard wearing polymer guide strips.Ability to run cables and pneumatics in side channel.Chain in same lateral position on each mod-ule. Giving a smooth clean appearance and aiding cable runs.Hollow crossties to enable cables to run from one side of the conveyor to the other.

Chain TransferTransfer modules combine the features and benefits of the roller systems and chain con-veyor in one module. With a nominal roller pitch of 150 mm for all pallet types these transfers offer exceptional support for pallets during the transfer operation.

150 mm roller pitch3-mm thick steel rollers with steel sprockets¾ “ pitch flat sided chainTypes:Single Handed Transfer to Transfer UnitSingle Handed Extended Transfer toTransfer Unit

Roller TurntableThe turntable module is designed to change the direction of pallet travel by rotation of the pal-let through any angle from 90° to 180°, whilst keeping the relationship of the pallet runners to roller conveyor the same.

Rotation angle of 90 to 180 degrees. 147 pallets per hour rotating 90 degrees.Two rotation speeds of 2rpm and 4rpmConveyor speeds of 12 m/min and 18m/minPallet dimensions 800/1000mm L/R

Further Modules and AccessoriesOur commitment to the Pallet design has resulted in a large investment in this project.

As a result we will be continually adding modules to our existing range.

Please contact us for details.

Europallet and Chep type pallets.3mm and 5mm thick roller options.Soft start and inverter options available.Conveyor speed 12m/min and 18m/min.Fully CE compliant.

Roller TransferRoller transfers are a self contained unit, which can be fitted to a new or existing chain conveyor straight. The pop-up roller is powered by two motorised rollers. With a nominal roller pitch of 150 mm for all pallet types these transfers offer exceptional support for pallets during the transfer operation.

Tangential chain drive4 mm thick side channels.3 and 5 mm thick roller options.150mm roller pitch.

Chain TurntableThe chain turntable module is designed to change the direction of pallet travel by rotation of the pallet through any angle from 90° to 180°, whilst keeping the relationship of the pallet run-ners to roller conveyor the same.

Rotation angle of 90 to 180 degrees. 174 pallets per hour rotating 90 degrees.Two rotation speeds of 2rpm and 4rpmConveyor speeds of 12 m/min and 18m/min900mm Chain centresPallet dimensions 1200mm L/R

Beam Lift AssemblyThe beam lift assembly is designed to lift pallets 200mm above the chain conveyor. The beam assembly has two standard types, low and high. Low types range from 650mm to 800mm top of chain heights. high type beam lifts range from 850mm to 1000mm top of chain height.

Low and high type available. To suit 2 strand chain conveyor..200mm Pallet LiftMaximum pallet weight 1500kg

Double TransferDouble transfer modules combine the features and benefits of the roller systems and chain conveyor in one module. With a nominal roller pitch of 150 mm for all pallet types these trans-fers offer exceptional support for pallets during the transfer operation. The modules are availa-ble to suit the standard pallet conveyor widths.

150mm roller pitch. Bi-directional control available.Conveyor speeds of 12m/min and 18m/minMaximum pallet weight 1500kg

Pallet Conveyor Straight

A robust pallet roller conveyor system. Rollers are driven tangentially by 5/8” chain in a fully enclosed side channel. The systems offers minimal backlash, easy tensioning and a 150mm roller pitch. With a load capacity of 1500kg per pallet the straight modules are available to handle upto 4500kg total conveyor load.

Tangential chain drive

Option of steel or polymer sprockets on rollers

4 mm thick side channels.

3 and 5 mm thick roller options.

Chain tensioning done quickly without removing guards.

150mm roller pitch.

Ability to run cables in non-drive channel. Fascia to close section off.

Ability to fit photocells anywhere along length via clamp brackets.

Soft start and inverter motor options available.

Roller Conveyor Straight 40242101-1

HeightsRange of heights available from 400 - 900mm (Top of Roller)

Motor Type0.37, 0.55, 1.1 and 1.5 kW available

Roller Conveyor Straight 40242101-1

Motor OptionsNo Brake - No InverterBraked - No Inverter

Chain5/8” pitch simplex chain

Lengths Available1050 to 6000mm in 150mm increments

Pallet Size1000mm L-R

Speeds Available12m/min and 18m/min available

Electrical PowerMotors should be connected to 415V 3-phase, 50Hz sup-ply.

12m/minLoad Capacity Motor Power

(kW)Full Load

Current (A)1500kg 0.37 0.953000kg 0.55 1.44500kg 1.1 2.8


(kW)Full Load

Current (A)1500kg 0.55 1.43000kg 1.1 2.84500kg 1.5 3.6

1152

220

213.

5050

50 74

205

213.

50

7017

5

2401 021215 Stand Fixing Centres

3/4” pitch flat sided linked chain provides a strong supporting surface to convey pallets up to 1500kg. These modules are available in two and three chain ver-sions. Chain tensioning is quick and easy with no requirement to remove any guards..

1500kg pallet load capacity

4-mm thick side channels.

¾”pitch flat sided chain running on low friction, hard wearing polymer guide strips.

Ability to run cables and pneumatics in side channel.

Chain in same lateral position on each module. Giving a smooth clean ap-pearance and aiding cable runs.

Hollow crossties to enable cables to run from one side of the conveyor to the other.

Chain Conveyor Straight 40242102-1

Chain Conveyor Straight 40242102-1

HeightsRange of heights available from 375 - 925mm (Top of Chain)

Motor Type0.75, 1.1, 1.5, 2.2, and 3.0 kW available



Lengths Available1300mm to 3600mm in 50mm increments





(kW)Full Load

Current (A)1500kg 0.75 2.03000kg 1.5 4.24500kg 2.2 5.9


(kW)Full Load

Current (A)1500kg 1.1 3.23000kg 2.2 3.94500kg 3.0 7.2

'A'850101

200

101900

Dimension 'A' (mm)Load Capacity (kg) 2 Strand 3 Strand

1500 113.5 1563000 134 1814500 159 221

2 STRAND

3 STRAND101 400

450

'A'

200

101450

400

2401 36

900 Between Stand Centres

450 Between Stand Centres 450 Between Stand Centres

Roller transfers are a self contained unit, which can be fitted to a new or existing chain conveyor straight. The pop-up roller is powered by two motorised rollers. With a nominal roller pitch of 150 mm for all pallet types these transfers offer ex-ceptional support for pallets during the transfer operation.

Tangential chain drive

4 mm thick side channels.

3 and 5 mm thick roller options.

150mm roller pitch.

Roller Transfer 40242103-1

Roller Transfer 40242103-1


Motor Type0.18 kW available

Pallet Size800/1000mm L-R



Motor Power (kW) Full Load Current (A)0.18 0.58

MIN

600

TO

R IN

UP

PO

SIT

ION

(MIN

550

TO

R IN

DO

WN

PO

SIT

ION

)

1490

1152

BB

2401 21

105 146222.5 146 146 146 146 105222.5

1028

Fix

ing

Cen

tres

1378 Fixing Centres

Transfer modules combine the features and benefits of the roller systems and chain conveyor in one module. With a nominal roller pitch of 150 mm for all pal-let types these transfers offer exceptional support for pallets during the transfer operation.

150 mm roller pitch

3mm thick steel rollers with steel sprockets

¾ “ pitch flat sided chain

Types:Single Handed Transfer to Transfer UnitSingle Handed Extended Transfer toTransfer Unit

Chain Transfer 40242104-1

Chain Transfer 40242104-1


Motor TypeChain Conveyor 0.75, 1.1 kWLift Transfer 0.55 kWRoller Conveyor 0.37, 0.55 kW



Speeds AvailableRoller Conveyor - 12m/min and 18m/minChain Transfer - 12m/min and 18m/minUp to 213 pallet transfers per hour


Motor Power (kW) Full Load Current (A)0.37 0.950.55 1.40.75 1.9


952/

1152

741500

450450900

25 160 1401401500

Top

of R

olle

r Hei

ght

1642

70

2401 37

1150 Fixing Centre Under Roller Conveyor

1028 Fixing Centre Under Chain Conveyor

128

Single Handed Extended Transfer to Transfer2520mm Long Chain Strands

Single Handed Transfer to Transfer1600m Long Chain Strands

25 160 1401401500

Top

of R

olle

r Hei

ght

74

1500

450450900

1150 Fixing Centre Under Roller Conveyor

128

2537

1028 Fixing Centre Under Chain Conveyor

The turntable module is designed to change the direction of pallet travel by rota-tion of the pallet through any angle from 90° to 180°, whilst keeping the relation-ship of the pallet runners to roller conveyor the same.

Rotation angle of 90 to 180 degrees.

174 pallets per hour rotating 90 degrees.

Two rotation speeds of 2rpm and 4rpm

Conveyor speeds of 12 m/min and 18m/min

Pallet dimensions 800/1000mm L/R

Roller Turntable 40242105-1

Roller Turntable 40242105-1


Motor TypeRoller Conveyor 0.37, 0.55 kWRotation Drive 0.18, 0.37 kW

Speeds AvailableRoller Conceyor - 12m/min and 18m/minChain Transfer - 12m/min and 18m/minUp to 213 pallet transfers per hour


Motor Power (kW) Full Load Current (A)0.37 0.950.55 1.40.75 1.9


2401 08

2000

Bac

k to

Bac

k

Clockwise

1229 Floor Fixing Centres

Top

of R

olle

r17

3

955

Floo

r Fix

ing

Cen

tres

1000

Position of adjacent roller conveyor

Chain Adjustment NutsPrior to installation these shouldbe positioned directly underneaththe roller drive unit as shown. Thiswill ensure correct positioning forthe application turning through90° and 180° in the clockwise direction.

Note:When installed in the above positionthe turntable will only rotate in theclockwise direction

458 (position of sensor roller)

80

Chain Turntable 40242106-1

The chain turntable module is designed to change the direction of pallet travel by rotation of the pallet through any angle from 90° to 180°, whilst keeping the relationship of the pallet runners to roller conveyor the same.

Rotation angle of 90 to 180 degrees.

174 pallets per hour rotating 90 degrees.

Two rotation speeds of 2rpm and 4rpm

Conveyor speeds of 12 m/min and 18m/min

900mm Chain centres

Pallet dimensions 1200mm L/R

Chain Turntable 40242106-1

HeightsRange of heights available from 425 - 1025mm (Top of chain)

Motor TypeChain Conveyor 0.75, 1.1 kWRotation Drive 0.18, 0.37 kW

Speeds AvailableRoller Conceyor - 12m/min and 18m/minChain Transfer - 12m/min and 18m/minUp to 213 pallet transfers per hour


Motor Power (kW) Full Load Current (A)0.18 0.580.37 0.950.75 1.91.1 2.8


248

150

2000

TOC

2000

Cha

in C

entre

s

Clockwise

1020

Position of adjacent chain conveyor

2401 24

955 Fixing Centres

1229

Fix

ing

Cen

tres

Turntable Bridging UnitsStand Foot Plates(shown for reference only)

Chain Adjustment NutsPrior to installation these shouldbe positioned directly underneaththe roller drive unit as shown. Thiswill ensure correct positioning forthe application turning through90° and 180° in the clockwise direction.

Note:When installed in the above positionthe turntable will only rotate in theclockwise direction

80

Beam Lift Assembly 40242107-1

The beam lift assembly is designed to lift pallets 200mm above the chain con-veyor. The beam assembly has two standard types, low and high. Low types range from 650mm to 800mm top of chain heights. high type beam lifts range from 850mm to 1000mm top of chain height.

Low and high type available.

To suit 2 strand chain conveyor..

200mm Pallet Lift

Maximum pallet weight 1500kg

Beam Lift Assembly 40242107-1

HeightsRange of heights available Low Height 650 - 800mm (Top of chain)High Height 850 - 1000mm (Top of chain)

Motor Type1.5 kW

Speeds Available25mm/s


Motor Power (kW) Full Load Current (A)1.5 3.6


Pallet Lift200mm

Cycle of OperationUp stroke = 10 secsDown stroke = 10 secs

762

900

Cen

tres

900

Cen

tres

1220 Fixing Centres

850 Between Lifting BeamsTo

p of

Cha

in -

200

172

400

2401 11

5050Up Position

Down Position

Double Tranfers 40242108-1

Double transfer modules combine the features and benefits of the roller systems and chain conveyor in one module. With a nominal roller pitch of 150 mm for all pallet types these transfers offer exceptional support for pallets during the trans-fer operation. The modules are available to suit the standard pallet conveyor widths.

150mm roller pitch.

Bi-directional control available.

Conveyor speeds of 12m/min and 18m/min


Double Tranfers 40242108-1

HeightsRange of heights available from 400 - 1000mm (Top of roller)







Set

To

25 N

om. I

n U

p P

ositi

on a

nd 2

5 N

om.

In D

own

Pos

ition

Top

Of R

olle

r Hei

ght

124

1500

1152 70

109

3 Fi

xing

Cen

tres

115

0 Fi

xing

Cen

tres

1200

1343 Fixing Centres

60

3

3250

3300

816 14219090101

179

450

450

856 372

3920

372

2401 28

170

140

40242109-1

Centre transfer modules combine the features and benefits of the roller systems and chain conveyor in one module. With a nominal roller pitch of 150 mm for all pallet types these transfers offer exceptional support for pallets during the trans-fer operation. Pallets can be received and transfered in either direction.

150mm roller pitch.

Conveyor speeds of 12m/min and 18m/min


Centre Tranfers

40242109-1Centre Tranfers

HeightsRange of heights available from 500 - 1000mm (Top of roller)







1500

116

0 Fi

xing

Cen

tres

450

45 0

417.5

2131

1030

Fix

ing

Cen

tres

1155 70

1183

120 210 120

262

Top

of R

olle

r Hei

ght

300

2401 33

Documents

Pallet Conveyor System · New modular pallet conveyor from SHS Ltd The new modular pallet conveyor comprises of heavy duty chain conveyor, roller conveyor, chain transfer and turntable