Upload
first-sight-graphics
View
230
Download
0
Tags:
Embed Size (px)
DESCRIPTION
The Journal for Engineered Wood
Citation preview
are you ready?we are!
the decorative panels groupCentury House, Premier Way,Lowfields Business Park, EllandWest Yorkshire, HX5 9HF
The final pieces of the installation jigsaw are being put inplace at Decorative Panels’ vast new components facility.
Sawing systems, fully automated edgebanding lines,and the most advanced through feed drilling cells are allinstalled and fully operational.
Computer controlled materials handling systems, highbay board and pallet racking, as well as automaticpacking lines are all in place.
Huge volumes of kitchen and bedroom carcase andfascia panels are being produced.
With capacity of over 500,000 panels per week thefacility is one of the most efficient in Europe.
175,000ft2 reasons to choose Decorative Panels
the decorative panels groupYOUR PERFECT PARTNER
· State of the art brand new production facility
· Increased production capabilities enables faster turn around and competitive pricing
· Knowledgeable, experienced staff to assist fromconcept to completion
T: +44 (0) 1484 658341 F: +44 (0) 1484 658812E: [email protected]
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 1See our website and interactive magazine www.p-j-production.com
CONTENTS
& JOINERYPRODUCTIONSeptember/October Issue 2012
Published by: EC Media Services23 Uvedale RoadEnfield, MiddlesexEN2 6HA
Telephone/Fax: +44 (0)20 8366 3331
E-mail: [email protected]
Website: www.p-j-production.com
Publisher: Ernie Hollister
Designer: Ian Curtis , First Sight Graphicswww.firstsightgraphics.com
Printer: The Magazine Printing Co. plcwww.magprint.co.uk
Reproduction of articles: All material appearing in Panel & JoineryProduction is strictly copyright, and all rights are reserved. No part of the publication may be copiedor transmitted in any form whatsoever, including photocopying,without the prior permission of the publishers.
Publishers’ note: The editorial opinions expressed in Panel & JoineryProduction are not necessarily those of the publishers, who shall beunder no liability with respect to any article published herein.
Distribution: Panel & Joinery Production is published six times a yearand circulated to designers, individual purchasers and specifiers whoare manufacturing within the wood-based panel, board and solid woodindustry in the UK and Ireland. Annual subscription is at thefollowing rates, which include postage:
UK & N. Ireland £18.50Mainland Europe £23.00Elsewhere £28.00
© Copyright EC Media ServicesISSN 2046-4134
FEATURES
4-28 W12 PREVIEW
31 WHERE TO BUY – CNC ROUTERS
37-42 W12 DESIGN PREVIEW
43-48 DECORATIVE SURFACES & EDGINGS
IBC WEBSITE DIRECTORY
CONTENTS
2 News
4-5 W12 – A Forum of Products & Ideas For The Future
6 SCM Group Launches New Machines at W12
8-10 Something For Everyone From Homag UK at W12
12 New Wood & Panel Processing Technology from RW Machines
14-15 CD (UK) Set To Impress At W12
16 WOW!! - Weinig’s Winner
17 ATA Engineering On Show at W12
20-21 Brilliant By Name And By Nature
22-23 AMS Wins Exclusive Kentwood Distribution Deal
26 New Ecogate Business Makes W12 Debut
30 Vollmer Leads The Way With First PCD Tool Production Event
32 AXYZ Router Ups The Tempo At Traditional Timber Tradesmen
33 New From Koch
35 Brio Opens The Door To Quality
36 Six More Combilifts For James Latham
40-41 Ostermann’s New Edging Catalogue 2013/2014
42 David Clouting Set To Make Spectacular Impact
43 Irish Eyes Smile on James Latham
44 Neutral Naturalness From Renolit
46-47 George Osbourne Visits Decorative Panels
W12, the UK National Trade Exhibition for the joinery and furnituremanufacturing industries. NEC Birmingham, 7-10 October 2012
See article pages 4-5
2 Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com
NEWSNEWSLatest
8th Branch Openingfor Movac
Specialist coatings supplier, Movac Group
Limited, is pleased to announce the opening
of a new branch in Reading which started
trading in August.
Movac is an advanced and progressive
supplier of wet coating and associated
industrial products to the wood finishing,
metal coating and general industrial sectors
and is able to supply over 60 thousand
matched colours in a variety of coatings to
exact customer specification, from its current
7 distribution centres in the UK.
For further information:Tel : 0844 381 4285
Email: [email protected]
Wood Awards 2012 –Shortlist Announced
For its 10th year, the Wood Awards
received an unprecedented 362 category
entries from which an exceptional shortlist
has been selected by the judges.
The Wood Awards is a flagship for wood in
the best of British architecture, furniture and
design, and the 30-strong shortlist for 2012
shows that excellence in design and
craftsmanship using wood, is thriving. This
year’s shortlist features unique private
houses and stunning small projects,
outstanding restorations, splendid public
buildings and unique furniture ranging from
the traditional to the cutting edge, all of
which are strong candidates for Awards’
main categories, which have been updated
for the 2012 competition.
The Wood Awards 2012 Shortlist will be
showcased at Timber Expo, Ricoh Arena,
Coventry on 25th and 26th September, and
selected projects will be presented by the
architects and designs to form part of
Timber Expo’s new expanded programme
of seminars.
The judges are visiting the shortlist over
the coming months, and the winners -
including the coveted Gold Award winner -
will be announced on 27th November at
Carpenters’ Hall in London.www.woodawards.com
100% DESIGNAnnounces an exciting line-up for
International Pavilions:
September 19th – 22ndEarls Court London
For further information:Tel: 0207 713 9388
Email: [email protected]
ON THE MOVE
Advanced Machinery Services
New Address:
Skeffington Mill
Uppington Road
Skiffington
Leicestershire
LE7 9YE
Tel: 0844 844 9949
www.advancedmachinery.co.uk
BWF
The British Woodworking Federation
New Address:
Building Centre
26 Store Street
London
WC1E 7BT
Tel: 0844 209 2610
www.bwf.org.uk
Timber Expo ExhibitionRicoh ArenaCoventry25th – 26th September 2012
Wood Bros AchieveFISP Certification
Wood Bros have worked with the
Furniture Industry Sustainable Programme
(FISP) directly over the last year and a half
and have now established full FISP
accreditation.
FISP, which is audited by FIRA
International, was launched in 2006 to
support and improve the furniture industry’s
sustainability credentials.
As part of the completion Wood Bros
produced an environmental policy key to
upholding good practice. They have also
looked at other key issues such as waste
management and energy usage. They also
looked at their social responsibilities to
ensure that they are an ethical employer
committed to the outside community.To discover more about FISP certification, visit
www.fira.co.uk/consultancy/fisp
FIRA to Host an Open Day
FIRA is holding a free Open Day on
Thursday 4th October at its Stevenage
Headquarters where visitors can explore the
company, ask questions, tour the renowned
test facilities and listen first hand to FIRA’s
extensive offering. The Open Day, which will
be held from 10am until 2.30pm will include
a number of informative presentations from
FIRA experts. This is the last FIRA Open Day
for 2012, but plans have already been made
for Open Days to be held on 21st February
2013 and 23rd May 2013.
To book a place or for further information please contact Chrissie Winsor:
Tel: 01438 777700Email: [email protected]
Diary Dates 2012DON’T MISS IT!
7-10 October 2012 - NEC Birmingham, UK.
SLEEP SHOWBusiness CentreIslingtonLondonNovember 21st – 23rd 2012
LIGNAHannoverMay 6th – 10th 2013
INTERZUMCologneMay 13th – 16th 2013
Neil Douglass, Financial Controller
for RENOLIT Cramlington Ltd was
honoured for his charity works by
becoming one of the Olympic
Torchbearers ahead of this years
London 2012 Olympics.
Nominated by someone they know, in
Neil’s case his sister, 8,000 inspirational
people carried the Olympic Flame as it
journeyed across the UK. The Olympic
Flame stands for peace, unity and
friendship.
Neil's nomination storyIn October 2010 Neil's world was turned
upside down when he was diagnosed with
Chronic Myeloid Leukaemia (CML). CML is
an extremely rare type of blood cancer and
had it gone undetected, Neil could have
been dead within three years. In the short
time Neil has been living with this disease
his thoughts turned to raising money for a
charity which is trying to find a cure. Neil
chose Leukaemia & Lymphoma Research
who offer patients like him hope for the
future, hope for a cure and support in the
meantime. Neil is a selfless fighter and
wants to raise money for the charity to help
as many people as possible. So far Neil has
raised nearly £10k since his diagnosis. Neil
has done the Coast 2 Coast Cycle
Challenge, completed his 8th Great North
Run and organised a charity games night
which rose over £3k. Neil's strength and
determination is unbelievable.
Statement from Neil“I was originally nominated in June 2011,
and never thought I would actually be
chosen. I found out in March 2012 that I
had successfully been selected and had
passed all of the security checks. Only then
did I start to realise just how important it
would be to carry the Olympic Torch.
The anticipation built as June 15th
approached and the day itself was amazing.
Thousands of people lined the streets and
cheered me along my stretch of road in
North Shields, Tyne & Wear. It is an
experience I am very lucky to have had and
one I will never forget it. Carrying the
Flame was an incredible honour, only made
possible by the support that friends, family,
colleagues and RENOLIT have shown in
supporting my charity fundraising for
Leukaemia & Lymphoma Research.”
If you would like to make a contribution
to Leukaemia & Lymphoma Research
details can be found at
www.beatbloodcancers.org.uk
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 3See our website and interactive magazine www.p-j-production.com
PEOPLE
Local Fundraiser Is Olympic Torchbearer RENOLIT Cramlington Ltd employee carries Olympic Torch
For further information:Tel: 01670 718222
Fax: 01670 590096Email: [email protected]
Keri Merilo, an engineer at RENOLIT
Cramlington Ltd has been awarded a
Queen Elizabeth II Diamond Jubilee
Medal for recognition of services
provided to the Blyth all-weather
lifeboat of which he is Head of
Operations and a Coxswain.
The Queen Elizabeth II
Diamond Jubilee Medal was
awarded for having honourable
service in the military, police,
prison, and emergency forces, or
for outstanding achievement in
public service.
In 2004 the RNLI
(Royal National
Lifeboat Institution)
announced the
withdrawal of their
all-weather lifeboat
from the busy port
town of Blyth in
Northumberland in the
Northumberland Coast Area of Natural
Beauty. The area covers 39 miles of some
of the most dramatic coastal scenery in the
country from Berwick to the Coquet estuary
and is home to a host of conservation sites,
including two National Nature Reserves at
Lindesfarne (Holy Island) and the Farne
Islands.
As soon as Keri, an experienced marine
engineer who previously worked for many
years in the Merchant Navy before joining
RENOLIT Cramlington Ltd, heard the news
from the RNLI that they would withdraw
their boat, he immediately
realised the potential dangers
which could occur and set
about forming a group of
people to raise enough money
to buy and run their own
lifeboat from Blyth. It is
believed to be the only all-weather boat
amongst the few lifeboats operating
independently from the RNLI in the UK.
Keri, who devotes the majority of his free
time to running the lifeboat, has now been
deservedly recognised and rewarded with
the award of a Queen’s Jubilee Medal. Since
its launch the Blyth all-weather lifeboat has
been called out on numerous occasions and
in some of the worst weather imaginable to
rescue stricken boats, fishermen, stranded
divers, water-skiers and swimmers and has
undoubtedly saved many lives. The Blyth
all-weather lifeboat is a registered charity
(No. 1124987) and relies completely on
donations. If you would like to make a
contribution details can be found at
www.blythallweatherlifeboat.com
Queen Elizabeth II Diamond Jubilee Medal RENOLIT Cramlington Ltd Employee Receives Honour
For further information:Tel: 01670 718244
Fax: 01670 590096Email: [email protected]
Keri Merilo proudly wearing The QueenElizabeth II Diamond Jubilee Medal
Neil running with the Olympic Torch in NorthShields, Tyne & Wear
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com4
NEWSEVENTS
As the momentum builds towards the October 7 – 10 dates at the NEC it is quite evident that visitors are set tobenefit from far more than mere shop windows for the furniture manufacturing and joinery industries.
The positive outlook for an improving future is underlined by the number of exhibitors planning new productlaunches or showcasing machinery and materials for the first time in the UK – Axminster will be presentingtheir range of machines from leading Italian manufacturer Griggio.
One of the most important aspects of the evolution of the parallel W12 shows since 2008 is that the conceptof a forum for ideas exchange has come to the fore. The importance of meeting with suppliers and expertsface to face cannot be under-valued.
This fundamental concept of professional conversation has been given added emphasis by the rapiduptake of time slots at the two Presentation Theatres that have been set up – one in each exhibition.
W12 Working with Design will also be the stage for the inaugural Design in Manufacturing Awards (DIMA)
W12 To Host “International” LaunchW12 Working with Design will be the venue of
what will effectively be the international launch ofthe new super lightweight board from FINSA.SuperPan STAR make its debut at the show. Theboard is FINSA’s SuperPan board, a chipboard corewith MDF-like fibre outside faces produced in apatented continuous process. Now, in collaborationwith German chemical giant BASF the core of theSuperPan is infused with the polymer Kaurit LIGHTto make SuperPan STAR 20% lighter with the samesuperior performance properties. SuperPan STARhas been entered into the Design in ManufacturingAwards (DIMA) competition.
Tel: 0151 651 2400
����������� ��
� �
�������� �������������������� ������� ��������������� ��������������������������� ��������������������������� ������������� ����������� ������������� �
�
������!� �������������������� "��� �#$%&'��(��
�� ���� ������)������������ ������� ��������������� ��������������������������� �����������**��������������� ������������� ����������� ������������� �
�
������+� ��������������������� ����������������������������� ,�������������������������� ������������� ������������� �������������� ����������� ������������� �
�
������-.� ������������������� "��� �#$%&'���(��
�� ���� ������)������������ ���������������������������� ������������� ����������� ������������� �
-/�,����������� �������0�� �1�� �����2 ����������������!3�-.�
�
��������������� �4��������������2�������5������ ��������1��� ���� ������� ������1������6���������1��� ���� ������� ������1������6��������
������� ��7�������� �������������� �����(���������������� ����
��������������� �4��������������2��������� ���1�8������������1��� ���� ������� ������1������6���������1��� ���� ������� ������1������6��������
��������������� �4��������������2�����������9����� �����������1�� ���� ����1��0�� ����1��� ���� ������� ������1������6��������7������ �� ��1��� ���� ������� ������1������6��������
������� ��7�������� �������������� �����(���������������� ������������������� �4��������������2��������1��� ���� ������� ������1������6���������1��� ���� ������� ������1������6��������
����������������
�������
����������������
��������������
��������
�������
����������������
���������������
������������� ��������������� ��� ����������������� ����������������������� ��������������������������� :;���������������������� ����<�����������
���������������������������� ��������������������� !�����"��������
���������������������������� ���������������������� �� �
�����#������� ��������������� �������������������� ����������������������� ��������������������������� ����<������������������������� ��������������������� ��� �����
�
�������+������� �������������� �������������������� ����������������������� ����<������������������������ ������$�<��%<��&
���������������������������� ��������������������������� ����'�������������������� ��������������������� ��� �����
�
�������()������� ��������������� �������������������� ����������������������� ��������������������������� ����<���*<������������������� ��������������������� ��� ����
�
(&�����������������������+�'����������'��"�� �����������=<&>?�
�
������������'��������'�����'��� ��������������<@�
��'���������'�����������������������+))������
����"���������������������������'�
������������������'����������'����������������&)(&���<��������%<�A%<�������������!���������'��������������
�����'�<����������������
���������������!�������������������������������
���������
�����<*���'�'�
���������,�
��<@�
W12 – two extremely imp
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 5See our website and interactive magazine www.p-j-production.com
EVENTS
IMA UK - SolutionsIMA will welcome W12 visitors to their stand in the
Working with Wood hall to discuss their extensive range ofhi-tech machinery designed to provide customer-specificsolutions.
The IMA UK sales and service portfolio is extensive.Chiefly they are the UK arm for wood and boardprocessing machinery manufacturer IMA KlessmannGmbH who provide both single and double-sidedthroughfeed edgebanding solutions, drilling systems, andCNC machine centres, with and without edgebanding. AtW12 they will be putting forward their new laseredgebanding systems for both throughfeed and staticmachinery.
IMA are able to provide factory solutions consisting ofall processing equipment complimented by a wide rangeof panel handling, storage and feeding solutions from bothIMA and Biele.
IMA UK are also agents for the famous Wemhoner shortcycle, and membrane presses, and will be discussingWemhoner’s superb solutions for pressing curved doorswhich is very much a current trend.
Finishing solutions from IMA come via the Heesemannrange of wide belt and profile sanding options. The widebelt machines range from stock removal to fine veneerfinishing and denibbing operations and employ thepatented CSD system.
Companies looking to cut and size large volumes ofboards need to visit the IMA stand to discuss the beamsaw angle plant options that are offered by leadingmanufacturer and solution provider Anthon.
The final piece in the jigsaw, are the drilling, insertingand assembly systems from Priess and Horstmann.
For further information:Tel: 0116 243 2181
Daltons Take Second W12 Stand To Launch NimacBeam Saw
Daltons Wadkin have acquires a second 39 square metres of exhibitionspace at W12 Working with Wood to launch the European manufacturedNimac beam saw for whom they have become exclusive UK agents.
The model to be displayed at W12 will be the cutting edge machinedesigned using state of the art 3D DAD software providing high qualitycutting, high speeds and low maintenance costs.
Daltons say that the saw is competitively priced incorporating manytechnical advantages over their competitors. Nimac beam saws are anestablished part of the European machinery sector and enjoy extensivesales worldwide.
Alex Dalton commented: “We have been looking for a European rangeof beam saws for some time and we are delighted that we now have anexclusive UK distribution agreement with a company who are specialistsin their field and offer an extensive range of equipment. It wasparticularly important to us that we introduce the brand at W12 and weare therefore very pleased to have been able to obtain the necessaryadditional stand space.”
For further information:Tel: 01159 865 201
REGISTER NOW FOR W12Anyone planning to visit the dual W12 exhibitions can pre-register on-line and for FREE now!
Go to the W12 website – www.w12exhibition.com - and click on the REGISTRATION button.
which itself has attracted entries of the very highest quality demonstrating cutting edge thinking and innovation.The success of deciding to run the whole W12 event as two seamless, parallel shows is already underscored
by the interest shown by some of the industries biggest names – who for one reason or another were unableto participate at W12 - putting down options for 2014…the impetus is already rolling on past W12!
As industry in general finds that it needs to find new ways to re-invent itself to ride the tough economicconditions, W12 could not come at a more important time. Find out new and smart ways to manufacture andimprove and enhance product quality. Explore intriguing ways to diversify and differentiate your product rangeand direction to capture share in new markets. It’s all at W12 for our vital days in the beginning ofOctober…you can’t afford to miss it.
Pre-register today at www.w12exhibitions.com
ortant events in parallel
The NIMAC Atlas beam saw fromDaltons Wadkin, exclusive UK agents
SCM Group, the World and UK’s
leading manufacturer and supplier of
Woodworking and Panel Processing
machinery, will take the opportunity
to show their latest machinery
innovations at the W12 Exhibition,
NEC, 7 - 10th October.
Covering an area of 320 square metres,
new machines from the classical machine
range and SCM's Premium Division will all
be running to demonstrate to visitors the
latest developments that have recently taken
place by the SCM Group within their
manufacturing facilities in Italy.
With 2 stands (7C360 and 8C350)
adjacent to the main entrance to W12, the
SCM Group will show the latest technology
that is currently available on the market,
including the Pratix S12/B and Tech Z5/52
CNC Machining Centres, K260 EVO, K600
and S1000 Edge Banders, Profiset 60
Planer Moulder, Verticut Wall Saw and
several new Classical Machines.
The Tech Z5 to be displayed, with a 5-axis
routing head, has a table area of 5200 x
1550mm and is ideal for the production of
customised furniture components and for
the machining of panels. It can also be
equipped with devices
suitable for solid
wood machining
especially for
joinery companies that manufacture stairs
and doors.
Maximum operator convenience and
flexibility of use due to the "PRISMA 5"
routing head that allows easy operation in a
reduced space without the risk of collisions.
Performance and overall dimensions ratio
due to technical solutions such as the
bumpers safety protections and the electric
cabinet that is located within the machine
base.
Productive and compact, the new
Olimpic K 600 is the ideal edge bander for
companies processing and edge banding
large quantities of panels, even if they are of
a different type, as it is designed to work
for many hours consecutively, and fitted
with several devices available to enable fast
changeover from one job to the next with
minimal production downtime.
The RT-E panel edge trimming device
provides a perfect edge to the panels before
edge gluing, due to the use of the front
copying devices that allows a constant
removal of material over the entire panel
length, maintaining the same work piece
geometry, and also includes the ED-
SYSTEM high efficiency exhaust hoods.
The Profiset 60 Planer Moulder is
designed to be very sturdy with up to 6
spindles available and has a generous 230 x
120mm capacity, with feed speeds of 6 / 12
or variable 4 -24 metres/min. The new feed
system using Cardan joints and gearboxes
is the technological heart of this machine
providing higher productivity and an even
better finish to the timber.
Profiset 60 is equipped with a pre-
straightening system through the reference
engraver located on the bottom planer
spindle. Perfect feeding due to the manual
pump for table lubrication and to the
inferior idle roller placed on the outfeed
table as standard features.
SCM's new 'VERTICUT 60', the vertical
panel saw for dynamic, developed panel
cutting requirements, is for customers
seeking a versatile machine capable of
operating in a limited floor space. The
VERTICUT design, developed by SCM, was
based on the desire to make the production
process really simple and easy in any
working condition and combines sturdiness
and smoothness so that this superior
machine now rivals other manufacturer's
models.
Sturdy and with the performance of
much larger machines, including prismatic
guides on both vertical and horizontal
movements, this saw suits all cutting
requirements. The VERTICUT 60 is
available in two versions, one manual and
one automatic with continuous action,
having working dimensions of 4300mm for
horizontal width cutting and 2080mm
horizontal cutting height. Both versions
fully benefit from the 2200mm vertical
cutting height with a working thickness of
60mm to meet the most diverse machining
needs.
SCM's Classical machines to be shown
include the TI155EP Class Spindle Moulder,
S6300 Thicknesser, SI300S Nova and
SI400EP Class Sliding Table Panel Saws.
SCM Group Launches New Machinesat W12
W12 PREVIEW
For further information:Tel: 0115 9770044 Fax: 0115 9770946
Email: [email protected]
See our website and interactive magazine www.p-j-production.comPanel & Joinery Production SEPTEMBER/OCTOBER 20126
SCM TECH Z5 CNC machiningcentre with 5-axis routing head
A COMPLETE RANGE OF 3, 4, & 5 AXIS CNC ROUTERS MANUFACTURED TO THE HIGHEST QUALITY FOR
PERFORMANCE AND RELIABILITY
Whatever your requirementsOnsrud has a solution
ATA ENGINEERING PROCESSESTel: 01442 264411 Fax 01442 231383 Email [email protected]
www.ataeng.com www.cronsrud.com
See us at
The W12 show returns to the NEC in
Birmingham this year from 7th – 10th
October and once again HOMAG UK
will be pulling out all the stops with
the largest presence at the show. The
company will be showcasing machines
and software solutions from all of the
HOMAG Group including, BRANDT,
BÜTFERING, LIGMATECH, WEEKE,
HOLZMA and BARGSTEDT, not
forgetting HOMAG itself.
“We will be welcoming guests to our
stands in Hall 7,” explains Simon Brooks,
sales and marketing director of HOMAG
UK. “Here the HOMAG Group’s team of
experts will be on hand to answer any
questions. Visitors will be able to see live
demonstrations of a considerable selection
of machines and software designed to
improve the productivity, quality and profit
for all business sizes.
Efficient processing from start to finish
“We feel that W12 is an extremely
important exhibition. Consequently, we
have, once again, invested in a large area to
present HOMAG City. The exhibition is the
perfect opportunity for us to showcase how
machines from each member of the
HOMAG Group can be integrated together
to create powerful and productive work
lines.”
To demonstrate just how flexible and
beneficial HOMAG Group machines can be
there will be a fully functional work cell at
W12. This work cell will be controlled by
eSolutions, HOMAG Group’s highly
intelligent woodCAD|CAM software which
has been specifically configured to create
efficient order processing and instant
integration to production machinery.
Under the control of the optimisation
software will be the BARGSTEDT TLF 210
automated board stock control system. The
idea behind this machine is to maximise
productivity and minimise downtime in the
area of low batch, make-to-order production
using various board types, colours and
sizes.
After being instructed by eSolutions on
which panels to move, the BARGSTEDT
TLF 210 will feed the HOLZMA HPP 350
saw. Here the board will be quickly and
efficiently cut to size and sent on to the
WEEKE BHX 055 processing centre.
This 3-axis processing centre is equipped
for all drilling needs. With a footprint of
just 5m2, it is extremely compact and yet
packed with all the features of a
conventional CNC. Small enough to fit
comfortably in any production facility, it
also has an equally trim price tag which is
within reach of most manufacturers.
Once the panel has been processed
through this station it will move on to the
BRANDT Ambition 1650 FC single-sided
edgebander. With extremely short set up
times, this is a powerful all round machine
that is ideal for everything from batch size
one production through to office, living and
bedroom furniture.
Finally, the last position on the work cell
will be the versatile LIGMATECH MPH
450 carcass clamp. This flexible and solid
assembly machine is appropriate for both
the craft industries and the industrial
manufacturer. Because of the machines
heavy, solid structure it is a step above the
competition, producing strong, robust
finished products.
Something for all at HOMAG City
“We are keen to show everyone that
HOMAG does not just cater for larger
factories,” explains Simon. “We will have a
lot of machines on show that are suitable
for companies of all sizes as well as our
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com8
Something for Everyone fromHOMAG UK at W12
W12 PREVIEW
HOMAG City will be in Hall 7 at W12, NEC Birmingham
bigger machines for the industry giants. A
wide range of entry level machinery will be
presented, including attractively priced
edgebanders for shaped and straight
panels, wide belt sanders to suit all budgets,
CNC machinery in various formats along
with many software modules that can be
used at all levels of production.
“The flagship HOMAG BAZ 322 CNC
processing machine will be performing live
at W12. It will demonstrate edging panels
with shaped edges to show the speed,
accuracy and consistent quality that keeps
HOMAG ahead of the game when it comes
to CNC machining. The BAZ range is
available in various formats (including laser
edge technology) to meet the needs of all
business sizes.
“On the throughfeed front, visitors will
be able to witness the highest quality
edgbanding finish on the global market.
The HOMAG LaserTec uses the very latest
laser edging technology to produce panels
of such quality that it is almost impossible
to detect the bond line with the naked eye.
Two HOMAG edgebanders will be
demonstrated throughout the event.
“The brand new LIGMATECH VKS 200
is going to be a real show stopper; this
revolutionary automatic box cutting
machine is a perfect addition to any
business producing one off components.
With the VKS 200 there’s no need to hold
high stocks of empty boxes or filler pieces.
Once the size has been entered, the
machine does the rest making boxes as
required. It can save up to 35% of packaging
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 9See our website and interactive magazine www.p-j-production.com
W12 PREVIEW
The compact and versatile WEEKE BHX 055 CNC processing centre – Over 1000 sold.
A range of HOMAG’s revolutionary laser technology will be on display
material requirements and can be used as a
stand-alone machine or linked to a packing
line,” enthuses Simon.
HOMAG will also be showcasing its
expertise in 5-axis technology in the form of
the HOMAG Venture 316. Constructed
with a heavy-duty machine frame, stable
moving gantry and the DRIVE5C spindle
this is a premium quality yet truly
affordable CNC processing centre. The new
DRIVE5C five-axis routing spindle means
that one spindle now does the job of a
whole array of traditional units including
routing, profiling, drilling and sawing.
Simon concludes, “Two years ago W10
was a great success and we are anticipating
another equally good, if not better, turnout
for this year’s show. W12 is an event in the
woodworking industry calendar that really
shouldn’t be missed. We’ll have a fantastic
display of machinery and software solutions
for all types of manufacturers, from small
businesses to large companies. There is
truly something for everyone at W12 and
this will be a great opportunity for visitors
to see what the future holds for the
woodworking industry.”
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com10
W12 PREVIEW
For further information:Tel: 01332 856500
Fax: 01332 856400Email: [email protected]
www.homag-uk.co.uk
BARGSTEDT TLF 210 with HOLZMA HPP 350 saw
HOMAG woodCAD|CAM software
HOMAG Venture 316 lock case routing
Contact us for the latest developments in sanding lacquer and high grade surfaces
Tel 0845 833 0565 Fax 0845 833 0567Email [email protected] www.kundig.co.uk
R.W. Group, Britain’s leading
independent wood and panel working
machinery supplier, will be launching
major new technology developments on
their stands in Hall 7 at the
forthcoming W12 show.
The most sophisticated throughfeed CNC
system yet from Italian specialist Stema is
able to address all six panel surfaces
randomly and with no set-up delays. Panels
of all dimensions can be loaded with each
individually ‘read’ and automatically
gripper adjusted for machining ... time after
time!
Also at W12 will be Anderson’s latest
Selexx pro nesting line with full automatic
loading and unloading of panels using the
latest auto-pusher system which can, say
Anderson, virtually double machine
productivity. Completed nests of panels or
timber components are transported out of
the working area to allow instant
reloading for the next
processing cycle.
This new Selexx is
outstanding, say RW
Machines, in
circumstances where a robustly efficient yet
affordable CNC solution is needed.
Orma’s latest membrane press model
will be shown on the stand at W12 finishing
shaped door panels and Giben’s new ‘K
Series’ edgebander from the recently
launched Giben Edge range will be set up
for high speed processing of 2mm PVC.
Also demonstrated on the stand at W12 will
be Vitap’s new generation of Eclipse
edgebander technology for edgefinishing
shapes that was launched at W10 and will
also be shown in its latest upgrade form.
And also new from Vitap on the RW
Machines stand at W12 will be the Italian
company’s latest Point 2 Point boring
system that will be shown drilling from
the underside of
the panel and
moving work
seamlessly
throught the cycle on Vitap’s latest and
newly patented throughfeed belt transport
system. Vitap say that this new boring set
up is the ideal tool for the complete range
of cabinet panel parts including corners,
stretcher rails, doors and drawer front
panels; it saves on floor space, is
simplicity itself to operate and is the ideal
low cost solution.
Also from Vitap will be their exciting new
Bridge system plus the very latest carcass
press from Bonacin - their new Closer
semi-auto system. There will be a lot to see
at W12 that is new and exclusive from RW
Machines.
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com12
New Wood And Panel Processing Technology From RW Machines In Hall 7 - Stand 7380 - At W12
For further information:Tel: 01869 244943Fax: 01869 253498
Email: [email protected]
Selexx pro-nesting with full automatic loading and unloading of panels using Anderson’s latest auto-pusher system with RW Machines on stand 7380 at W12
W12 PREVIEW
David Colman, Managing Director of Triesse Ltd, explained that‘manufacturing today has become increasingly competitive.Production processes have to be squeezed for every last pound perhour and for one more component per shift. Better productionmachinery is one of the few remaining areas where significantgains can be made. So, to maintain our manufacturing leadership,we purchased the latest ah8 cut-to-size plant technology fromSchelling UK Ltd’.
Achieving a high degree of automation is becoming even more vitalto guarantee a continuous flow of material in a modernmanufacturing facility. Born out of this philosophy comesSchelling’s automatic internal turning device which allows for headcut patterns without any interruption to the production flow. Oncethe head cut is made, the feeder pushes the head cut out and pullsthe rest of the board back over the turning device. Furthermore thebuffer between the rip cut and cross cut angular transfer increasesthe capacity immensely as both saws can cut simultaneously whilestrips are prepared for both saws. The advantages identified byTriesse include shorter cycle times, reduced manual handling andbetter utilisation of material. Just to push productivity even further,a separate push-off carriage simultaneously loads the rip-cut saw tokeep production continuously moving. The whole of the Schellingah8 is characterised by numerous automatically monitoredfunctions all designed to provide optimal productivity.
Triesse want the best possible solution for fast throughput of largerorders while at the same time retaining the option of small batchproduction, both with the highest dimensional cutting accuracy.Assisted by automatic cutting speed which is adjustable accordingto the book height both these options were easily achieved. Withthe aid of innovative technology such as double strip aligners and apowerful 32kW motor performance, the ah8 cut-to-size plant isideal for both production scenarios, in short: an all-rounder in theindustrial field.
Against a background of keen competition the importance oforganising the sawing operation was vital to achieving theproduction targets set by Triesse. Schelling’s design andengineering department made it possible and customised the ah8plant to fit into the space provided; crucially without leaving outany production material buffer zones which ensure everymovement is optimised.
Markus Freuis Managing Director of Schelling UK Ltd, explained,‘that no two plants are ever the same’. Each cut-to-size plant isdesigned according to the customer’s wishes and adapted to theirrequirements and space conditions. Solid conceptualisation combinedwith well thought-out details ensures a future-proof and highlyprofitable investment. At Triesse we knew that material loading andhandling were essential performance characteristics which wouldincrease the efficiency of the cut-to-size plant. This is why the plantwas designed with the option of thin loading and many moreadditional features to ensure flexibility and help increasedproductivity. Schelling’s goal is to give each customer what they wantand more.
Of particular importance to Triesse is the ability to cut an extensiverange of dimensions, materials and thicknesses. Because the ah8plant is fully automated it has the flexibility to change from onematerial to another at the drop of a hat with the accuracy and capacityrequired by a volume producer.
The whole sawing process is orchestrated by the latest controlsoftware (MCS Evolution). This allows the operator to see a real-timesimulation of the whole machine working – which features clearoperator guidance, with moving graphics on a large 22” TFT screen.This real time visualisation helps reduce operating errors, leavingmore time for the operator to focus on production. Key to theincreased efficiency is the High Performance Optimisation software(HPO) which delivers measurable performance improvements to thematerial production yield, utilisation of material and overall cuttingtime. This concentrated bundle of software and modern technologydelivers measurable improvements and actually helps run themachine without any big interference from the operator.
To summarize David, explained, ‘working together with Schelling theaim was to generate a cutting philosophy that delivered qualityimprovements, cost reductions, capacity increases, space benefits anda reduction in manual handling: we have achieved everything andmore and are ready for tomorrows business’.
Founded over 35 years ago as a supplier of wood based panel products, Triesse has expanded to become one of theUK's leading independent specialist wood based panel processors and veneered, laminated board manufacturers. Animportant part of Triesse’s growth and continuing success has been its choice of highly reliable production machineryincluding their latest investment in the Schelling ah8 cut-to-size plant.
Intelligent Features Increase Productivity For Triesse Ltd
For further information:Tel: 01937 586340
Email: [email protected]
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 13See our website and interactive magazine www.p-j-production.com
W12 PREVIEW
CD (UK) Ltd, exclusive UK Distributors
of CORIAN®, the original solid surface
from DuPont™, are aiming to impress
visitors to stands at both ‘Working with
WOOD’ (Stand 6D500) and Working
with DESIGN (Stand 6A214).
Visitors to their ‘Working with WOOD’
stand will be able to view a selection of
specialist machines and tools displayed to
demonstrate their ability to fully meet the
needs of solid surface fabricators. Also
featured will be the Machinery Division’s
capability in the joinery and furniture
manufacturing sector – notably with a
comprehensive range of wood veneer
processing machines.
Major machinery manufacturers
represented include: ELKOM, the market
leader in heating platens, thermoforming
and vacuum systems, and LANGZAUNER,
with precision machines for veneer cutting,
hot plate pressing and veneer sanding.
On show, and being demonstrated, will
be the ELKOM ‘Multitherm’
thermoforming station. This advanced
machine combines pre-heating and a
vacuum press to efficiently form and shape
all types of solid surface materials, acrylics
and thermo-plastics. And, staying with the
theme of heating and cooling technology, is
a display of ELKOM heating bars which can
be customised to meet individual
requirements. The main feature of the
LANGZAUNER display will be the LZK 3-
edge oscillating sander. With a 45 degree
tiltable table, driven feed belt and top
pressure, the LZK produces a superbly
accurate finished edge to veneered or solid
wood.
Making its debut at the show is an
exciting new calibrating/sanding machine,
specially developed for solid surface. The
‘SolidSurfacer’ has a working width of
950mm and, in a single pass, can
accurately finish a 3 metre worktop in
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com14
CD (UK) Set To Impress At W12
ELKOM Multitherm Basic Thermoforming Centre combinesa pre-heating station and vacuum press in a single unit.
W12 PREVIEW
under a minute. Visitors to the CD (UK)
stand will be able to see the ‘SolidSurfacer’
working, and witness how it dramatically
reduces the time involved in precisely
finishing solid surface.
Among the main attractions of the power
tools display is a demonstration of the
revolutionary SURCARE SMF-200
random orbital four-disc
sanding machine, which can
save up to 70% of finishing
time and cost on most
manually finished surfaces.
Other finishing tools being
demonstrated include
FESTOOL and MIRKA
sanders, and other top brands
on display will be Bessey,
Betterley, Fein, Makita,
Metabo and Omnicubed.
A highlight for visitors to
the stand will be a
demonstration of how easily a
household tray can be shaped
and formed from a flat piece
of Corian® - visitors can
then take a tray home as a
souvenir!
How to Design withCorian®
The theme of
CD UK’s stand in
the ‘Working with
DESIGN’ hall is all
about designing
with Corian®. On
show will be interesting
examples of items designed
and made using Corian® and
the underlying message to
visitors is: ‘It’s possible for you to fabricate
items like these’. There will be a kitchen island
unit, complete with Corian® worktop and
Corian® doors in various finishes and handle
options and Complementing this will be a
bench and seating, also constructed in
Corian®. Also
displayed will be a Corian® bath, together
with examples of stylish bathroom vanities,
and the new Corian® colour palette will be
presented on an eye-catching spherical display.
W12 PREVIEW
For further information: Tel: 0113 201 2240 Email: [email protected] www.cdukltd.co.uk
New calibrating/sanding machinespecially developed for solid surface.
The Weinig Cube, PAR and
straightening planer, is ‘must see’
machine at W12. Nothing like this
one has ever been seen before at
an exhibition. PAR and
straightening of timber has
never been easier, as fast or more
precise. Most importantly, there
is no setup time involved!
Innovation in setup technology
and design, make the Cube truly
‘Plug and Play’ – meaning that,
when you switch on – it’s ready.
It can also be moved around in
the workshop at any time, on a
hand operated lift.
The benefits are way above any
conventional machine can offer -
including the famous Weinig P22N
which is used widely in the industry. No
expensive training is needed. It’s
safe, simple and highly efficient.
Dimensional changes can be
performed at the push of a button,
with the spindles running. Call on
Stands C340 / D440 in Hall 8, or
call 01235 557600.
KUPER will be present at W12 in
Birmingham this year to promote their
massive range of USED MACHINERY.
With over 2000 machines in stock
available in “as is”, checked and tested
or fully reconditioned KUPER offer
the widest choice and the highest
quality anywhere in the world.
In association with Ian Croft, KUPER’s
UK sales partner, KUPER also will launch
their unique machinery RENT TO BUY
scheme.
This scheme is aimed at customers
needing to upgrade or expand their
machinery capacity without need for
traditional financing, which is currently
difficult to attain regardless of the stature of
the business. Machines are available to
rent for 12 or 24 months and include a
purchase agreement at the end of the rental
period. Customers also benefit from a
contract service programme on all
machinery rental deals. “This arrangement
is available on all KUPER used stock and
enables our customers to install machinery
without the hurdles and delay associated
with current finance arrangements,”
comments Ian Croft. “In association with
ASSET FINANCE UK we can offer our
customers a purchase finance agreement in
advance for the end of the term thereby
enabling the customers to have the
machine making profit from day one,
easing cash flow and taking benefits from a
taxation point of view.”
Machinery available includes
Edgebanders, CNC machining centres,
beam saws, wide belt sanders, presses and
veneer machinery, handling and assembly
machines.
The quality of used machines at KUPER
in far higher than normally available and
German users tend to upgrade machines
earlier thereby creating a good stock of
modern, high quality well maintained
machinery. Within their 40 000 sq ft
workshop, KUPER engineers ensure that
each machine is fully functioning and safe
and ready to be shipped to the next end use.
All supported by worldwide KUPER service
and spares.
Ian Croft and Thomas Ottemeier from
KUPER with be present on stand 8C 310
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com16
For further information:Tel: 01235 557600
Email: [email protected]
For further information:Tel: 01954 212294
KUPER: 0049 5244 984 484ASSET FINANCE UK: 0113 281 8852
KUPER at W12
W12 PREVIEW
Wow!! Weinig’s Winner
The Weinig Cube – a revolutionary machine.
KUPER offer the widest choice of high quality machinery
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 17See our website and interactive magazine www.p-j-production.com
C R Onsrud manufacturing CNC
routers since 1994 maintain their
reputation supplying machines built to
the highest standards for
performance and reliability.
All machines are offered with a 2-year
warranty backed by 5 year 24/7 factory
support programme which includes remote
diagnostics.
The range includes 3, 4 and 5 axis models
with fixed or moving gantry, single or twin
tables, dual process technology, spindle
options from 12 to 50HP, brushless servo
motors and a choice of OSAI, Fanuc and
B&R controllers. Open architecture
controllers allows customers to use their
preferred software for design & toolpathing.
Aluminium or phenolic tables with options
for NEMI pods ensure C R Onsrud can
supply a machine ideally suited to customer
requirements.
As a result to the introduction of
increasingly complex materials in
aerospace, automotive, medical and other
manufacturing sectors, C R Onsrud have
now developed the 5 Axis Hybrid Mill
which combines all the best
production
features and
benefits of the
CNC router and
the CNC machine
tool into one design.
In order to maximise
performance of the C R Onsrud range, ATA
Engineering Processes supply an extensive
range of solid carbide, HSS and PCD tipped
router cutters to machine the wide range of
materials encountered across the various
manufacturing sectors.
ATA Engineering on Show at W12
W12 PREVIEW
��������������� ��������� � ����������� ������������������������ ������������� !"�#!#$�%#&�'�(���� !"�#!#$)&�**���������+�����,�+-.��������/����0�����0����.����01��
THE MASTERS OF WOODFINISHING TECHNOLOGY
������������������� ���� �������
������������ ���������� ����
For further information:Tel: 01442 264 411
Email: [email protected]
Trend is pleased to announce the
launch of their new 104 page,
Industrial Saw and Spindle catalogue.
This catalogue contains the complete
range of spindle tooling required for
the modern woodworking industry and
a comprehensive range of industrial
quality circular saw blades.
The Trend range of Industrial spindle
tooling includes multi-profile cutter heads
with tool steel and Tungsten Carbide knives
and brazed tip tooling as well as disposable
insert tooling.
Trend’s line of Tungsten Carbide Tipped
circular saw blades are suitable for panel
sizing machines; multi-rip machines;
horizontal panel sizing machines; table
sawing machines and aluminium /uPVC
cutting machines. All of the Trend
Industrial saw blades are subjected to
straightening, balancing and tensioning
using a unique technology to ensure high
quality and longer lifetime.
There are some exciting new
products which are being launched in
this new catalogue including:
• 35 new types and sizes of
sawblade.
• 30 new 40mm and 50mm
tool steel profile knives and
limiter plates.
• Multi profile panel
raising cutter block with
seven interchangeable
profiles.
• Spindle tooling starter set
complete with four of the
most popular cutter blocks in a
sturdy carry case.
• TSM50 spindle moulding machine
complete with high precision sliding
table available in single and three
phase.
• Disposable insert shear-up and down
rebating cutter block to produce a clean
edge on laminated board prior to
edgebanding.
• Disposable insert rounding over
cutter block set for
simultaneously rounding
over the top and bottom of
panels from 1mm to 10mm
radii and panel thickness
from 6 – 60mm.
Each page contains a detailed
product specification complete
with technical line drawings,
details of any spare parts and each
product is priced excluding VAT.
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com18
For a copy of the new Saw and Spindlecatalogue, or to request further
information and details of your nearestTrend Industrial Tooling Centre:
Tel: 01923 249911 www.trend-uk.com
W12 PREVIEW
New Trend Industrial Saw and Spindle Catalogue
Trend Machinery and Cutting Tools
Ltd continue to support the UK joinery
and furniture manufacturing industry
with a 64 square metre stand at the
W12 exhibition, NEC Birmingham from
the 7th – 10th October 2012.
The main highlight of the stand will be
regular demonstrations of a new system of
spindle tooling to produce solid timber
cabinet doors using the same single set idea
as their popular Modular Window System.
To complement the new tooling they will be
running a new spindle moulding machine,
the TSM50. The TSM50 will be available in
single phase and three phase and will come
as standard with a high precision flush
mounted sliding table. A fixed table version
will also be available to special order.
Other highlights of the stand include:
• The Trend TSM100 spindle moulder
with examples of timber windows
produced with the Modular Window
System. Ten of the alternative profile
styles that can be produced on the eight
different styles of window will also be
shown.
• New Sawblade and Spindle Tooling
catalogue with over 100 pages of new
and innovative tooling for the modern
joinery and furniture manufacturing
industry.
• Examples of Trend’s extensive range of
CNC and drilling tools.
• The CNC Smart Fast Y1300 machine
will be on display. This fully enclosed
CNC meets all the requirements of
EN848 Part 3 and is suitable for
customers without 3 phaase power
supply. Also on show will be a number
of software solutions to meet the
exacting needs of the industry.
• Samples of Trend’s Tungsten Carbide
tipped beam saw blades and scorers
currently being used in some of the
largest suppliers of laminated board in
the UK and Europe.
Trend will be running a prize draw
throughout the show to win a 4 piece
spindle moulder tooling set complete in a
sturdy carrying case worth over £900.
To request further information and detailsof your nearest Trend Industrial Tooling
stockist:Tel: 01923 249911
www.trend-uk.com
Trend Industrial Tooling at W12
A top-of-the range Striebig vertical
panel saw plus an entry-level model
will be demonstrated by T.M.
Machinery Sales, the Swiss
manufacturer’s exclusive UK dealer.
The fully-automatic Control 5216 fitted with
a scoring blade will feature Striebig’s optional
Electronic Positioning System (EPS) on both
the horizontal and vertical axes. This allows
for the automatic positioning of both the
length stop and saw head, increasing the saw’s
productivity by delivering automatic repeat
strip and upper trim cutting.
Fitted as standard is Striebig’s user-
friendly “touch and saw” operating system,
providing easy and convenient control
through a touch screen panel that operates
all of the machine’s functions.
Other standard features include a digital
measuring system, accurate to 0.1 mm, and
an adjustable precision display that can be set
to an accuracy of 1.0, 0.5 or 0.1 mm, according
to the thickness of the panels being sized.
Numerous procedures can be carried out at
the press of a button, including locking and
releasing the beam saw, setting the horizontal
cutting height, plunging and swivelling the
motor, locking the support rollers during
sawing and fine saw blade adjustment.
With manual feeding of the saw unit
eliminated the operator’s task is made easier,
giving him ample time to prepare the next job.
Also on show will be a Compact 4164
model, a manually operated all-rounder that
brings Striebig’s renowned quality within the
reach of the smallest business.
It’s one of the nine models in the Compact
series with a cutting range from 3100 x
1644mm up to 5350 x 2200mm.
An automatic feed series, the Compact AV, is
also available.
The Compact is based on a single, fully
welded sawing frame to give decades of
reliable service whilst maintaining cutting
precision.
Striebig saws can be wall-mounted or
freestanding. They can cut practically all wood-
based sheet materials as well as timber, plaster
board, plastics, composites and aluminium
panels. They guarantee impressive dust limit
values well below 1mg/m3.
Hall 8, Stand B245
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 19See our website and interactive magazine www.p-j-production.com
For further information:Tel: 0116 271 7155
Email: [email protected] www.tmpartnership.co.uk
W12 PREVIEW
Tried And Tested Vertical Panel Saws from Striebig
The Striebig Compact vertical panel saw is a highlyefficient entry-level all-rounder
Europes widest selection of used machinery - in Stock
Machines in three levels: Buy "as is", checked and tested or fully rebuilt
Current, modern, high quality brand and models
UK sales partner and KUPER worldwide service at your disposal
KUPER Sales Partner Croft Machinery Ltd.Unit 10, Dry Dayton IndustriesDry Dayton
Cambridge CB23 8UTPhone 01954 212 294Internet www.KUPER.deEmail [email protected]
20
Paul Haslam is a bespoke kitchen and
bedroom designer and manufacturer
with studios in Jersey and London.
Since 1986, the family-run business has
been designing and creating high
quality custom-made kitchens and
other free-standing furniture at its
Jersey manufacturing base, using only
the finest materials and never
compromising on quality.
The designs have evolved alongside
changing trends over the past 25 years and,
by developing construction and finishing
methods, Paul Haslam is now able to offer
a wide range of styles to suit almost any
requirement.
Investment in machinery and equipment
is important to the company, and Paul
Haslam has recently invested in both a
Kündig Brilliant 2 wide-belt sander and a
Kündig Uniq-S edge sander.
“We used to use a single-belt wide-belt
sander, but it had no automatic settings,”
director, James Haslam, commented. “The
machine was getting to the end of its
lifespan and we were looking at upgrading,
ideally to a dual belt sander.”
James’s research led him to Kündig, and
everything he read about the quality of
Kündig sanders was backed up through a
personal recommendation received by Paul
Haslam, company founder and James’s
father. This led to a visit to Switzerland, to
view the Kündig range at the company’s
Wetzikon factory.
“We had a fantastic trip,” recalled James.
“It was very interesting to
see the factory, as well as
fully functioning
demonstration models from
the entire range.”
James reported that he had
gone to Switzerland already
knowing that he wanted a
Brilliant sander, but not yet
ready to upgrade the
company’s existing edge
sander. However, there was a
particular option on the
Uniq which made it
irresistible. “Having seen both machines in
operation we decided to purchase both of
them, even though we only went there for
the Brilliant,” said James.
“We took along a piece of test door which
had come straight off assembly here: in one
pass it went from being an assembled door
to a fully finished door ready for spraying.
That was impressive!
“The factory was fantastic. The
meticulous attention to detail is echoed in
the machines. The flawless build quality
sets them apart from the competition.”
Describing sanding operations at the
Paul Haslam workshop, James said: “Apart
from operations such as hand and orbital
sanding, we have always used two large
machines: a wide-belt sander, which is
necessary for sanding doors and worktops,
as well as any panel that requires sanding,
while the edge sander is mainly used for
finishing edges. The wide-belt sander is our
main machine: that gets
through a lot of work on
a daily basis. The edge
sander is great for
cleaning workpieces up,
such as shelf edges.
“The great thing about
the Uniq edge sander is
that it has an automated
feed, so instead of
pushing through
manually and trying to
apply a constant
pressure by hand, the
automated feed belt ensures that all
pressure is even, and this produces a much
better finish.
“The design of the edge sander is what
our operators have been most impressed
with! The edge sander has a tilting function
which we will be looking to use in the
future, but the feed system is the thing the
operators have been going crazy about: they
think it is fantastic!”
Asked to describe the advantages the two
Kündig sanders have brought the company,
James said, “In particular, over our previous
sanders, I would say consistency of output.
The Brilliant is certainly quicker to operate!
“It did take us a while, and to be honest
we are still fine tuning the settings to suit
our particular requirements, but the
Brilliant has sped up sanding in general
because it has automated height
adjustments and the presets: less time is
required for the operator to enter
information, because this is taken care of
by the sensors and presets, so this saves
time.
“What I quite like with the presets is you
can customise many attributes of the
machine to suit a particular job. All our
drawer boxes are hand made and
dovetailed: they go through the machine.
They have a different setting from the
doors, so with a preset the machine can
automatically adjust itself from the door
setting to the drawer box setting, adjusting
feed speed, stock removal and belt speed as
well. You can make adjustments without
Brilliant by Name and by Nature
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com
Adjusting the settings – the second belt can be set to either straight or to anangle of 10 degrees
The BRILLIANT Twin wide belt sander is very accurate and can becustomised to suit a particular job
W12 PREVIEW
having to remember the settings each time:
you can quickly get to the result you need.
“Also, the quality of the end result is
without question superior to the previous
wide belt sander. You just have to inspect a
door after going through the Kündig sander
to see this! We are presently doing two
passes on each side of the door, but once we
fully understand the sander, we can
probably get it down to one.
“Because this particular sander is a twin
belt sander, the first belt is used for
roughing, taking away the majority of the
stock using a 120 grit paper, while the
second belt, which is used for finishing, is
much finer and achieves a really smooth
finish. In one pass you get both the
roughing and finishing operations, whereas
with a one-belt sander you need to change
belts between operations, and send the
workpiece through several times, in order
to get the final finish.
“The key thing with sanding large panels
is to have two operators, one at the front
and one at the back taking off workpieces
and stacking them up, so the fewer passes
you can do, the more time you can save. So
it is useful to be able to minimise the
number of passes.
“Another advantage is the oblique setting,
where the second belt can be set to an either
straight or to an angle of 10 degrees. On a
traditional sander, the sanding belt will
transfer any flaw to the workpiece. The
oblique sanding is a very clever design
making a much more even result.
“And the segmental
sanding pad is good for
the veneered material,
especially material that
requires just a very slight
clean. This is a function of
the second belt. The
veneer is very thin so you
don’t want to go through it
and hit the MDF. The
sanding pad is very good
for getting a light touch,
and the accuracy of the
sander makes that work well. You can use
expensive materials with confidence.”
Describing the daily workload of the
sanders, James said of the Brilliant: “It is
really a day to day workhorse. All the doors
go through there, both sides: our frames
tend to go through there just to remove the
lines from the material. You can’t avoid
picking up machining lines from the
moulder: the Brilliant removes them.
“Carcass material is already finished to a
high standard, but anything solid goes
through the machine several times: drawer
fronts as well —anything that needs a really
uniform finish.
“We did an interesting project with very,
very fine veneers used to wrap a curved
unit. We created a complex curved unit with
curved drawer fronts and a curved carcass,
and the way we applied a veneer onto the
drawer fronts was we built up the drawer
fronts from ply and then sanded down the
veneers very thin: we got it so fine that we
could wrap it onto our curved drawer front,
and then apply it.”
He continued: “One of the Kündig’s key
strong points is the accuracy you can get
with the height adjustment, down to 0.1
mm. A lot of machines will say a tenth, but
you have to adjust it manually; the Kündig
is very accurate.”
Planning for the future, James is looking
forward to extending the use of the preset
functions.
Summing up, James said: “The Kündig
sanders are both fantastic, there is no
question about that. They are certainly at
the top of their field, and they have a very
good reputation. We were sure we were
going for a good product anyway, and the
visit to Switzerland confirmed that.
“My father, who founded the company,
had not seen one of the machines in the
flesh until it arrived, and he was taken back
with the quality: he was very impressed.”
And asked if we would recommend the
company and the machines, James replied:
“Yes, definitely. The whole company was a
pleasure to deal with. I haven’t dealt so
much with Carl O’Meara in the UK, but I
do know that he has been very helpful, and
Stephan Kündig in Switzerland was a
delight to deal with. I would definitely
recommend Kündig to anyone wanting to
invest in a high quality sander.”
Kündig UK will be attending W12: visit
the stand to find out more.
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 21See our website and interactive magazine www.p-j-production.com
For further information:Tel 0845 833 0565
Email [email protected]
The UNIQ edge sander in operation
An example of Paul Haslam manufacturing utilising Kündig sanders finishing methods
W12 PREVIEW
Panel & Joinery Production SEPTEMBER/OCTOBER 201222
In a deal that is set to transform the
UK market for solid wood machinery,
Leicester based Advanced Machinery
Services (AMS) has won the exclusive
distribution rights for Kentwood, the
No.1 selling moulder in the US market.
The agreement sees AMS offering the
complete range of Kentwood moulders,
planers, grinders, rip saws, software
and automation solutions throughout
the UK and Ireland.
The Kentwood brand was developed for
Stiles Machinery Inc., the world's largest
independent distributor of advanced CNC
equipment for processing wood panels,
solid wood, wood composites, plastic, glass,
stone, and other materials.
Founded in 1965, Stiles currently has a
turnover in excess of $300 million and
offers a Total Production SolutionsSM
approach to manufacturing, from
equipment integration and manufacturing
consulting to education, service and parts.
The company’s philosophy is to help
businesses succeed – whether through
equipment solutions, new technology or
educational opportunities.
“This deal is a major feather in our cap,”
enthuses Steve Foster a director and
founder of AMS. He continues, “Kentwood
accounts for over 60% of all moulders sold
in North America. The brand, developed as
a real alternative to the established
European manufactured machines,
focuses on top build quality combined with
high specification as standard. For AMS to
secure this exclusive deal is fantastic news
for the future of our company.
“Co-director Steve McGloin and I have
worked tirelessly to make this happen and
we are delighted that such a dominant
player in the solid wood market has put its
faith in us to take the fight to its European
competitors.
“To promote the deal we have taken a
significant stand at this year’s W12
exhibition in Birmingham where we will be
demonstrating the products and looking for
suitable distributors, particularly for the
Irish market.”
Designed to take on the best from Europe
In order to compete with the established
and respected market leading brands in
Europe, the Kentwood team has developed
features to make machine setup and
See our website and interactive magazine www.p-j-production.com
AMS Wins Exclusive KentwoodDistribution Deal for UK and Ireland
W12 PREVIEW
Kentwood Moulder M509S
operation quick and easy. These include
what they term ‘Quick Set’ features and
sophisticated software solutions.
Co-founder and director of AMS, Steve
McGloin, takes up the story. “The
Kentwood machines have been designed to
be simple and efficient. Controlled via an
easy to use touch screen, the sophisticated
software makes the operation of these
machines child’s play. Adjusting the
spindle location and top load elements is
very straightforward. The three major
settings can be completed using one ‘crank’
handle. Small graphic display panels on the
front of the machine feature animated
arrows to show the operator which way to
turn the crank handle to set up the
machine. It couldn’t be easier.”
(Watch the YouTube video:
http://www.youtube.com/watch?v=RnDGQNlt6_M)
A real choice for the market“Our association with Stiles goes back to
our days at Wadkin. We have visited the
Stiles Kentwood team at their head office in
Grand Rapids, Michigan on a number of
occasions to help with product
development. This has resulted in AMS
having significant input into the
specification of the latest moulder range.
“However, it doesn’t stop there. Last year
we purchased the intellectual design rights
to the former Wadkin moulders and
grinders and we are looking to use Stiles’
experience and designs to develop these
products further,” explains McGloin.
Until now, customers looking for a one
stop shop for a turnkey machinery and
material handling system have had limited
options. With the deal AMS has secured for
the Kentwood Total Production
SolutionsSM there is a real alternative.
The Kentwood associated equipment
range includes planer/moulders, material
handling systems, optimising cross cuts,
toolroom grinders and template makers.
The modular material handling systems
can be integrated with existing moulders, re
saws and multi rips to greatly increase
productivity through the introduction of
simple in-feed and out-feed handling
systems.
Alternatively, Kentwood can design and
develop Total Production SolutionsSM for
complete production lines. These can
incorporate machinery (moulders/re
saws/multi rips), automation, control
software, raw material de-stacking through
to bar coding, wrapping and packing. These
production lines are laid out and tested in
full in the Kentwood factory for final
customer sign-off. With numerous
installations already in full production in
North America, AMS can arrange for
potential UK customers to view these sites
in the States to get firsthand experience of
the benefits they offer.
Part of a long-term planFor AMS, this deal is one of several key
pieces in an ambitious expansion plan as
Steve Foster explains, “Since 2007 we have
established a strong track record as a
provider of first class service support in the
UK woodworking industry. Our strategy
going forward is to support this with a
growing machine sales operation, taking
advantage of the famous Bursgreen brand
launched early this year and now, in the
solid wood machine market, with
Kentwood.
“To ensure the success of this venture
and underline our long-term commitment,
we have commissioned a new purpose built
unit in Leicestershire. This state-of-the-art
facility will house our head office,
showroom and training operations on one
site at Skeffington Mill.
“The coming months are going to be
tremendously exciting for the AMS team
and we are eagerly looking forward to
working with our network of distributors to
ensure the success of the famous Kentwood
brand in the UK and Ireland. In these
challenging economic times the build
quality and high specification of the
Kentwood product combined with first class
service from AMS will cement a bright
future for this powerful partnership,”
concludes Foster.
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 23See our website and interactive magazine www.p-j-production.comSee our website and interactive magazine www.p-j-production.com
For further information:T: 0844 844 9949 F: 0844 844 4744
Email: [email protected]
W12 PREVIEW
Kentwood Moulder M612S
The MitreX double mitre fence by
MARTIN has been newly developed to
perform mitre cuts quickly and easily.
Clever details such as simple length
compensation for common angles as well
as the tear-out prevention block make
perfectly clear that experts have been at
work here.
The MitreX double mitre fence by
MARTIN is equipped with a big angle scale
that can be adjusted very precisely and
mitres can be cut from two sides quickly
and easily. The ana-log double mitre fence
will be also available in a digital version by
the end of the year.
A precise angle cut is one thing, exact
length compensation of the workpiece is also
nec-essary in most cases. That is why length
compensation for 10 predefined angles from
0° to 67.5° is provided. The fence stops can
be set on both sides allowing for cutting
lengths of 90 to 1,400 mm. The angles can
be easily set by 1/10° with a magnifying glass.
The sturdy yet lightweight and small
anodized aluminum execution of the
MARTIN MitreX fence ensures good
visibility over the entire working area. The
integrated tear-out preven-tion block prevents
tear-outs of the workpiece and can also be
used for cuts based on marks.
MitreX can be mounted on every MARTIN
sliding table saw by simple one-hand
clamping from construction year 2001 or the
T73 series onward. Older machines or
machines from other manufacturers might
also be equipped with this fence.
Info: Otto Martin Maschinenbau GmbH & Co. KG
The Otto Martin Maschinenbau GmbH &
Co. KG based in Ottobeuren (Allgäu)
Germany, has a long tradition of being one of
the leading suppliers of high quality saws,
spindle moulders and planers. The family
enterprise was founded by Otto Martin in
1922 and cel-ebrates its 90th company
anniversary this year. Over the following
nine decades, what started with basic and
solid machinery eventually became a
standard for quality and func-tionality in the
woodworking machinery sector. High quality
manufacturing as well as user-friendly
operating concepts that make life easier for
the woodworker have always been of great
importance. 140 employees are working at
the company’s head office in Ottobeuren,
Germany, at present.
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com24
For further information:Tel: 0049 (0) 8332 911 119Email: [email protected]
www.martin.info
By Professionals for Professionals: The Mitrex Double Mitre Fence By MARTIN
Irish specialist manufacturer
Combilift will be at W12 with three
machines from its wide range of 4-way
forklifts on stand 6F 725. Given the
company’s reputation for innovation
there will naturally be new models
and features amongst the exhibits, so
if you want to improve handling
procedures whilst at the same time
increasing productivity a visit to the
stand is a must.
The timber sector was one of the first to
recognise the benefits of Combilift’s tailor
made approach to materials handling, and
the range of products on offer is as varied
as the differing requirements in the
industry itself. From heavy duty operation
in the harsh environments of sawmills to
the precision manufacturing of furniture
and staircases - there is a Combilift model
to suit your requirements.
Combilift supplies machines with
capacities from 2.5 up to 25 tonnes, but the
focus of the exhibits this year is on the
smaller to medium sized trucks which have
proved to be the most suitable for the
industry. The 4t capacity original and core
C4000 model will be displayed alongside a
larger capacity SL sideloader model. This
offers superior manoeuvrability over
conventional sideloaders and improves
storage density for maximum use of all
available space both inside and out.
The Combi-CB was the first
counterbalance design truck to incorporate
the benefits of 4-way technology, and this
was recognised by the UK Forklift Truck
Association which awarded it a unique
gold, “winner of winners” prize this year for
having made the most outstanding
contribution to the industry. If you are not
yet familiar with the CB range, the show is
an ideal opportunity to get a close look at
this award winner. Developed for those
needing to handle a combination of both
long loads and palletised goods, it can also
work inside containers for rapid unloading
of deliveries.
For further information:Tel: 07870 976 758
Email: [email protected]
Move in the Right Direction with Combilift
W12 PREVIEW
MitreX can be mounted on every MARTIN Slidingtable saw by simple one-hand clamping
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com26
Ecogate Ltd, the newly established
distributor of ECOGATE® energy-
saving dust extraction technology will
make its first European exhibition
appearance at W12.
The company will be showcasing the
proven energy-saving extraction
optimisation system developed by
California-based Ecogate, Inc. and visitors
will be able to witness demonstrations on
how the system operates and discuss its
benefits with specialist engineers.
Ecogate Ltd has been formed as a
provider of Ecogate products and services to
dust and fume extraction manufacturers
and installers throughout the UK and
Europe. Authorised Installers can purchase
the complete Ecogate product range,
including variable speed drives and cabling.
Ecogate Ltd offers its partners training on
energy-saving surveys, installation and
commissioning. And, for those not wishing
to take on those responsibilities, Ecogate
will carry out the processes on their behalf.
Chris Oldfield, managing director of
Ecogate Ltd, says: Ecogate has an impressive
track record in the UK and we want to share
the experiences gained from their
application in the joinery and furniture
manufacturing sector over the last two years.
We are looking forward to establishing
working relationships with leading dust
extraction companies and installers.
The company claims that installing an
ECOGATE ‘Extraction-on-Demand’ system
will slash electricity bills by up to 80% and
will typically pay for itself in just two years.
In most workshops, as little as 50% of
machinery may be in operation at any given
time, but dust extraction usually runs at full
capacity, with fixed fan speed, all of the
time. The outcome is an extraction system
which is likely to be consuming more
electricity than all the lights and all the
machinery put together. An Ecogate system
employs a central controller, automatic
motorised gates, remote machine sensors
and variable speed technology. When a
woodworking machine is turned on, the
sensor signals the controller to open the
motorised gate of that particular machine to
provide extraction and the controller
determines the optimum fan speed. The
result is an optimised system that only uses
energy when required.
New Ecogate Business Makes W12 Debut
For further information:Tel: 01924 438749
Email: [email protected] www.ecogate.co.uk
W12 PREVIEW
Smart technology provides real-time system status.
Ecogate Ltd will provide products and support services to authorised installers.
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 27See our website and interactive magazine www.p-j-production.com
Wood Waste Control (Engineering) Ltd – one of the
UK’s leading dust extraction specialists - is showing key
products from its comprehensive waste extraction,
processing and heating equipment range at the W12
exhibition at the NEC.
Equipment on display at W12 will include a 2-module silo
filter with rotary valve, 2-bin and 4-bin fine dust filters, wood-
fired heater and Reinbold AZR 600 chipper and RB30
briquettor. In addition, the company will be showing examples
from its comprehensive range of rolled-edge ducting
components.
Wood Waste Control provides the complete range of dust
extraction and heating equipment. Its modular silo and chain
filters meet a wide range of extraction requirements and from
simple stand-alone bagging units through to complex
integrated systems, the company provides a comprehensive
service. The products include the Whisper range of silenced
fans and fine dust filter units.
The company also provides the well-proven Reinbold series
of chippers, including horizontal grinders, and a range of
briquetting machine for all applications.
Wood Waste Control’s range of manual and automatic warm
air models in its T range are capable of burning a wide range
of wood fuels automatically, as well as accepting hand-loaded
offcuts.
The company is based in Bourne End near High Wycombe
and has hundreds of successful installations across the UK, in
Europe, Russia and Africa. As one of the country’s leading
dust extraction specialists all Wood Waste Control equipment
is built to meet COSHH legislation requirements and can
stand alone or be used in conjunction with total-extraction
return air heating systems.
Full details of the company’s high-quality slip or clip
ducting, manufactured from galvanised mild steel, is available
at www.ducting-online.co.uk.
Wood Waste Control also stocks and supplies a range of
used dust extraction machinery which can provide excellent
service at budget prices.
For further information:Tel: 01628 525290
W12 PREVIEW
Wood Waste Control provides a complete dust extraction service.
Wood Waste Control to Show CompletePollution Solution at W12
System
CleanCleanWorking
Environment
Complete Complete
for afor a
The
FOR A CLEANER ENVIRONMENTAL FUTURE
At Dust Pollution Systems, we have been busy systemizing spot
extraction in the industrial working environments. Our systems cover
all aspects and working methods from the small, mobile dust
extractors to large turnkey stationary industrial installations.
www.dustpollution.co.uk
ENVIRONMENTAL CONTROL SYSTEMS SPECIALISTS
Dust Pollution Systems Limited
Unit 1 & 2, Premacto Works, Queensmead Road,
Loudwater, High Wycombe, Bucks. HP10 9XA
Telephone: 01494 462333 Fax: 01494 463777
At W12, leading dust and fume
extraction engineers, Dust Control
Systems Ltd, is to display key products
from the extensive Schuko range of
dust extraction equipment. DCS is the
UK distributor for German
manufacturer Schuko, who designs
and manufactures high-efficiency
extraction systems, filters, and
associated processing equipment.
Schuko technology, together with the
expertise and know-how that DCS has
amassed in providing energy-efficient
optimised extraction systems, presents a
formidable combination.
Equipment on show will include a
Schuko EcoVar 2020 Solo rotary-valve filter,
complete with integral fan, explosion relief
vent, and discharge hopper. The fully ATEX
compliant filter is a high-efficiency unit,
which has a filter surface area of 100m2,
and a total airflow capacity of 12,000m3/hr.
The filter is fitted with polyester needle felt
filter elements and has
pneumatic/mechanical vibration cleaning
and a dry sprinkler system. The EcoVar
range is modular and can be supplied as an
individual unit or as an extendable system.
Of particular interest to small to medium
sized workshops, or schools and colleges, is
the Schuko range of mobile dust extractors.
On display will be a Vacomat 180 XPe filter
unit which features exceptionally high
suction power in a compact design. The 180
XPe has an air volume of 2,610m3/hr and a
filter surface area of 13.5m2. The energy-
saving unit has its own controller, and filter
cleaning is carried out by a mechanical or
pneumatic shaker with waste being
collected in two dust-tight containers with
plastic sacks. Visitors will also have the
opportunity to see the unique Vacomat N-
1000 filter. Developed for workshops
requiring air flows up to 6,000m3/hr, the
Vacomat N-1000 combines the advantages
of a much larger filter in a relatively small
footprint. It has an integral fan and can be
customised for a wide variety feed and
discharge arrangements whilst allowing
individual adjustment of suction and
filtration to suit particular requirements.
The N-1000 is available in a choice of filter
area sizes ranging from 25m2 to 270m2.
Woodwaste processing equipment from
Schuko includes a range of briquetting
presses, and a range of robust waste wood
shredders. Full technical support for
Schuko products sold into the UK is also
provided by DCS.
Recognised as the leading UK supplier of
energy-saving systems for dust and fume
extraction, DCS successfully introduced the
premier extraction-on-demand system,
ECOGATE®, into the UK over 2 years ago,
and today, is the first authorised installer of
Ecogate.
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com28
W12 PREVIEW
DCS Showcase Schuko
For further information:Tel: 0800 040 7116 Fax: 01924 482530
www.DCSlimited.co.ukThe Schuko EcoVar modular filter system can
be supplied as an individual unit or as anextendable system.
The Vacomat 180 XP mobile filter unit features exceptionally high suction power in a compact design.
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 29See our website and interactive magazine www.p-j-production.com
A joinery company in Norwich has
replaced three wood waste heaters with
brand new ones from Wood Waste
Technology.
Pronto Joinery provides both the general
public and trade with wooden replacement
windows and doors from its purpose built
factory in Horsford. The company has used
wood waste burners for many years, but
wanted to replace its existing heaters with
newer ones to benefit from enhanced
technology and efficiency. Having heard
excellent reviews about the range of heaters
manufactured by Wood Waste Technology,
the team contacted Kurt Cockroft for more
information.
Pronto Joinery converts all its wood waste
into briquettes, which are loaded into three
wood waste burners that generate enough
heat to keep the 25 employees warm during
the winter. Any excess briquettes are bagged
and sold to the public via a number of local
supermarkets and other outlets supplied by
Pronto Joinery.
Following a site survey, three new Wood
Waste Technology WT15 heaters were ordered
and delivered to Norwich. Installation was
easy, as the old heaters were just removed and
replaced with new ones, which were then
connected to the original ducting to allow the
warm air from the wood waste burners into
the factory during colder months.
Peter Scott, MD of
Pronto Joinery Ltd says, “As
a company, we’re very
proud that we recycle all our
timber waste. Whilst it’s
great for the environment
that we don’t need to use
any valuable fossil fuels like
coal and oil for heat, it’s also
good for our company as it
saves us money on heating
bills and skip charges, plus
provides an additional
income stream into the
business from the sale of
the excess briquettes”.
The new heaters have been in the factory
just over a year, so have had their first annual
maintenance service. Peter comments,
“We’ve been delighted with the high level of
customer service we’ve received from Wood
Waste Technology – they’ve been a great
company to deal with, from initial purchase
right through to the first service. The new
heaters have been well worth the investment,
as they seem to be much stronger and more
reliable than the previous ones.”
Wood Waste Technology’s years of
expertise in wood waste solutions have helped
many companies reduce their waste disposal
and heating costs. As well as offering site
survey, design, manufacture, installation and
on-going maintenance for new units, the
company also services all types of wood waste
heaters and supplies genuine spares up to
60% cheaper than other suppliers.
In addition, Wood Waste Technology is the
UK official distributor for Gross UK, a
German manufacturer of dependable,
precision engineered shredders and
briquetters, available in various size and
specifications to suit all business applications.
Out with the Old and in with the New
Call Wood Waste Technology on 01785250400 and start to recoup some value
from the waste in your business, or visitwww.woodwastetechnology.com or
www.grossuk.co.uk to find out more.
Flextraction Ltd., supplier and
manufacturer of Local Exhaust
Ventilation (LEV) products has
received an order in excess of £100,000
to supply, deliver and install fume
extraction equipment to Coleg Gwent’s
new £33.5 million ‘state of the art’
Blaenau Gwent Learning Zone in Ebbw
Vale.
This order, which included training in
the use of the equipment for the College’s
teachers and instructors, covers equipment
for use in their woodworking, brickwork,
plasterwork and plumbing training
facilities.
The equipment in the woodworking
training facility comprises a high vacuum
extraction system with connection points
for a fixed extraction system to
woodworking equipment made up of 6 x
extraction hoods, 4 x floor mounted
stanchions, 1 x sweep up box and 3 x rear
capture systems, all with abrasion proof
hoses and airflow indicators.
Both the pasterwork and brickwork
training facilities will have mobile filter
extraction units with airflow indicators,
with the latter facility being also equipped
with an extraction enclosure and dust
collector. The plumbing training facility will
have a TEKA Filtercube BGIA-certified DIN
EN ISO 150 12-1 stationary central suction
and filter unit, 6 flared hoods, each with an
airflow indicator. All workshops will have
the necessary ductwork required to extract
the dust produced in training.
Lee Darton Managing Director at
Flextraction said; “We were contacted by the
Architects during the initial design stages,
as we have previously installed fume
extraction in a number of colleges in which
they were the principal architects, so we
were able to design our equipment at a very
early stage to fit in with their design and
layout requirements.”
For further information:Tel: 01664 410641
Email: [email protected]
Fume Extraction Equipment Order for Flextraction
W12 PREVIEW
30 Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com
PROFILE
The recent PCD Days event at
Vollmer's headquarters in Biberach,
Germany, proved a resounding success
for the company and an extremely
informative trip for the 30 UK
customers who attended. The PCD
event was aimed at giving customers
from the wood cutting industries a
full insight into the technology and
products available from companies
with a wealth of experience in the
production of PCD and TCT cutting
tools.
The three day event commenced with
presentations from Vollmer Werke’s Sales
Director Jürgen Hauger and Vollmer UK's
Managing Director Peter Allen. The
informative presentations provided
customers with an insight into the
company's products and ongoing
developments as well as providing
technological knowledge transfer for the
visitors.
To complement the presentations, the
visitors were given an extensive tour of
Vollmer's manufacturing facility. The
company tour provided visitors with an
insight into what is behind the Vollmer
name, as well as an awareness of the
ongoing R&D work that enables Vollmer to
maintain its position as a world leader in
the provision of machine tools for
processing PCD and TCT cutting tools,
circular saw blades and bandsaw blades.
The tour of the 29,000sq/m plant
commenced at the 'goods in' department.
An area that instantly demonstrated how
Vollmer implements
flexible workflow systems
throughout the entire
business. With a machine
tool lead time of six to
eight weeks dependent
upon machine model, the
innovative workflow
system is a critical
element of the business.
To highlight the accuracy
of the workflow system,
Vollmer has an automated
and 'live' storage facility
that has over 80,000
stored components with
6000 part movements each day.
This finely tuned system enables Vollmer
to supply its production lines and end users
with spare parts as soon as they are
required. This part storage facility includes
the storage of parts for all machine tools
dating back to the 1950's, regardless of
whether the machine is still in production
or now obsolete.
With over 500 employees at its
headquarters in Biberach, Vollmer has over
80 staff employed in the R&D division with
another department dedicated to prototype
work to support the R&D work. With
almost 20% of the company's staff and 10%
of its turnover re-invested in R&D.
With such talent and ingenuity in its
R&D and prototyping departments, Vollmer
was keen to inform visitors of new
developments that have been added to its
existing machine tool range. The award
winning QXD200 and
QXD400 erosion and
polishing machine tools
have now received
extended functionality for
processing PCD drills
and cutting tools with a
high shear angle, whilst
manufacturers of circular
saws will be provided
with added functionality
for scoring saws.
The market leading
QXD machine has been a
major success for Vollmer since its market
introduction in 2009. For visitors working
with the QM machine, the predecessor of
the QXD, the QXD undoubtedly aroused
interest. With improved motion systems,
automation systems and software
strategies, Vollmer estimates that erosion
with the QXD is now at least 30% faster
than grinding.
The Vollmer visitors that included some
of the UKs leading PCD tooling and TCT
blade manufacturers, were given
demonstrations on new innovations and
integrating new technology to existing
plant, plus tutorials on the new product
lines. The impressive Tech Centre not only
enabled customers to get a taste of the latest
innovations but also receive technical
support in an environment dedicated to
supporting the end users.
Vollmer UK will be aiming to further
develop its relationships with the respective
companies to ensure that its UK customer
base are fully informed and employing the
technologies and philosophies that will
enable customers to supply cutting tools for
the wood cutting industry that are beyond
the productivity and capabilities of their
competitors.
Vollmer Leads the Way with First PCD Tool Production Event
For further information:Tel: 0115 9491040
Email: [email protected]
Examples of TCT circular saw blades machined on Vollmer Machine Tools
UK customers discussing applications with Vollmer engineers
Heian Corporation of Japan are renowned the world over for quality machinery and specialise in the designand manufacture of a comprehensive range of high performance precision heavy duty CNC Routers and 5
Axis Machining Centres. Single or Multi Headed Spindle Motor configurations are available withautomatic tool changers to each head. Multiple spindles for vertical and horizontal boring areavailable on specific models. All Heian Machines are fitted with precision NSK/THK Ballscrews,Toshiba Inverters and Fanuc CNC Controllers, therefore high quality and precision machining isguaranteed.
The EG-231PBMC is a fast and highly flexible nested based Gantry type CNC Router with a single vacuumsuction table 1,600 x 3,700mm, 1 x 11 KW 25,000rpm spindle motor with HSK 63F tool system, 8 Tool
ATC and a 9 spindle L shaped vertical boring spindle assembly. This versatile machine is ideal for a wide rangeof applications, manufacturers of furniture components, small joinery shops, and small to medium sizedcompanies with limited work shop floor area.
Heian EG-231-PBMC
MANUFACTURER: HEIAN CORPORATIONAGENT: – HOLZTECHNIK MACHINERY SERVICES LTDUnit 21A Evans Business CentreMarston Moor Business ParkTockwithNorth Yorkshire YO26 7QF
Tel: Freephone 0800 112 3928Fax: 0845 459 1362Email:[email protected]
Designed and Manufactured by Heian Corporation of Japan the NC-4102-PMC machine is the newgeneration of twin table CNC Routers. Heian are renowned the world over for quality machinery andspecialise in the design and manufacture of a comprehensive range of high performance high
precision heavy duty CNC Routers and 5 Axis Machining Centres. Machine Flexibility, Reliabilityand Repeatability is guaranteed with all Heian CNC Machinery.
The Heian NC-4102-PMC 10 Axis four headed twin table CNC Router with Multi-path control enablesthis machine to run two programmes simultaneously on separate tables with single or multiple heads. Themachine is equipped with 4 independent X and Z axis, one X axis and one Z axis to each spindle motoraggregate and two Y axis for each separate table, 4 x 7.5KW Spindle Motors, 24,000 rpm with BT.35 or HSK tool holdersystem. Each spindle is equipped with a front mounted 12 Tool Direct-type ATC. Axis feed speed of 60M/min for X/YAxis and 20M/min for Z Axis, all controlled by a high specification Fanuc CNC Controller. This highly versatile machinewill provide high performance machining solutions to a wide customer base.
Heian NC – 4102- PMC 3116
MANUFACTURER: HEIAN CORPORATIONAGENT: – HOLZTECHNIK MACHINERY SERVICES LTDUnit 21A Evans Business CentreMarston Moor Business ParkTockwithNorth Yorkshire YO26 7QF
Tel: Freephone 0800 112 3928Fax: 0845 459 1362Email:[email protected]
NC-4102 PMC - 3116
EG-231-PMBC
Anew auto pusher from Anderson on their Selexx CNC work centres can double machine productivity by instantly transportingcompleted nests of panel or timber components out of the working area to allow immediate reloading of the next machining cycle.Andi Selexx CNC machines are deployed across Europe to address wide-ranging pro-nesting requirements. Andi HSK tool holders
and eight-position automatic carousel tool changers are standard on all Selexx models which are available in the UKfrom long-standing distributor RW Machines Ltd. of Bicester.
Selexx is THE production CNC - a reliable, affordable, performance-oriented machining centre with features that areuncommon in this price range. The small footprint of Selexx makes it the ideal CNC solution on even the smallest
shop floors, boosting productivity and lowering manufacturing costs.
Andi Selexx CNC Leads For Pro-Nesting
Manufacturer - RW MachinesUK Agent – RW MachinesRowood House, Murdock Road, Bicester, Oxon OX26 4PP
Tel: 01869 244943Fax: 01869 253498 Email: [email protected]
Biesse is a name that is known around
the world for providing leading
technology and expert customer care
in the wood sector and it is this
reputation that the entire brand is
built upon and that encourages
brand loyalty from its worldwide
customer base.
The company invests heavily in R&D to
bring the latest advancement in
technology to the market that empowers
its customers to achieve more. Recently,
after several months of trials Biesse UK
has launched its latest product, one that
saves its customers money and provides
complete peace of mind.
Biesse’s 5 Years Total Care is the
industry’s first 5 year manufacturer’s
warranty, it’s a product that’s included in
the price of all new machinery from
Biesse, a product that gives owners and
operators complete peace of mind for 5
years or 10,000 working hours (whichever
comes first), knowing their investment is
protected and under complete warranty.
To ensure that the Total Care warranty
is applicable Biesse is also including 5
years servicing in the Total Care package,
which enables Biesse to ensure that the
machinery is working to Biesse’s high
standards and validates the warranty every
1,000 hours or once a year.
When a customer buys a machine from
Biesse they can feel confident that the cost
of ownership is reduced, having
eliminated the cost of servicing charges
and any unforeseen machinery break-
downs that occur during the Total Care
warranty period. All customers have to
pay for is the machine and the wear & tear
parts that a machine uses during the
warranty period.
Furthermore if there is an issue with
any Biesse machine Biesse’s team of
expert engineers are on stand-by to get
their customers machine’s working as
quickly as possible either via phone where
the engineers can connect directly to the
machine over the internet or through a
site visit. To assist Biesse’s service
department the spare-parts department
holds over two million pounds worth of
stock in the UK to ensure parts can reach
customers on a next-day delivery.
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com32
Total care is Biesse’s commitment to itscustomers here in the UK and to find outmore information on the 5 year warrantyor any of Biesse products customers can
contact Biesse UK:Tel: 01327 300366
Email: [email protected]
Biesse’s team of expert engineers are on stand-by to get their customers machines working as quickly as possible
Biesse: Taking Total Care of its Customers
PROFILE
Following installation of an AXYZ
CAMTECH Z7 router, Somerset-based
Traditional Timber Tradesmen has seen
a significant increase in production
and greater access to new business
opportunities. Established in 2000, the
company specialises in the production
of bespoke carpentry and joinery,
ranging from timber-frame buildings
and associated structures to the
restoration of listed buildings.
In addition to conventional day-to-day
work, the company is now firmly
established in the growing niche market
for small portable buildings. Entry into this
sector followed a commission 11 years ago
to produce a replica Victorian bathing
machine, followed by a shepherd’s hut
which in turn led to the creation of a timber
home office unit known as ‘The Hut’ and
more recently to ‘The E-Den’ log cabin used
primarily by the burgeoning ‘Glamping’ (a
term used to describe devotees of a more
glamorous and comfortable form of
camping) outdoor leisure market.
In the creation of this cabin, the AXYZ
router was used to carry out a wide range of
production requirements. Founder and
Director of Traditional Timber Tradesmen,
John Tucker commented: ‘The CAMTECH
Z7 is used for all aspects of the
manufacture of ‘The E-Den’ cabin, from the
pattern-making of traditional components,
shaping of all internal wall panels
(including cut-out sections for electrical
sockets and so forth) and the construction
of the curved-top storm-proof stable-type
door featuring a wave-patterned rebate.
This innovation would have been
impossible to carry out by hand and use of
the router truly elevated the entire project
in terms of creativity and overall quality.’
The AXYZ CAMTECH Z7 router is a
full-sized entry-level system that shares
many of the advanced production tools and
machining capabilities of AXYZ’ higher-
end, higher productivity but consequently
more expensive routing solutions.
Significantly, it has the same robust
construction based on a welded steel frame
plus a cost-sensitive set of machining
configurations that will effectively handle a
wide range of materials, including solid
woods, particle and foamed boards, non-
ferrous metals, plastics and their
derivatives, used for both 2D and 3D
designs. It also includes as a standard
feature the latest A2MC Control System.
This is said to represent a huge
advancement in machine control
technology by offering the highest
attainable control capabilities by
comparison with any similarly positioned
system on the market. The A2MC delivers
much faster and smoother motion based on
S-Curve (Seven Segment Velocity)
trajectories, resulting in a significant
reduction in ‘bounce’ and vibration caused
by sudden acceleration or deceleration often
experienced with other machine control
systems.
John Tucker added: ‘The AXYZ router is
also used extensively for other work
undertaken. This includes cutting MDF,
plywood and timber components for other
joinery companies, as well as supplying
sign manufacturers with ACU and acrylic
shapes, letters and engraved timber
signage.’
The AXYZ CAMTECH router installed at
Traditional Timber Tradesmen uses
ArtCAM Express software from Delcam,
with a machine upgrade likely once work
increases to warrant the investment. John
Tucker concluded: ‘Purchasing the router
has made a big impact on our business by
opening up new markets and increasing
our productivity which hopefully will be
reflected in the future profitability of our
business.’
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 33See our website and interactive magazine www.p-j-production.com
AXYZ Router Ups The Tempo at TraditionalTimber Tradesmen
For further information on AXYZ routingsolutions:
Tel: 01902 375600www.axyz.co.uk
For more information on the servicesprovided by Traditional Timber Tradesmen
Tel: 01458 830198www.timbertradesmen.co.uk
PROFILE
The AXYZ CAMTECH Z7 CNC router installed at Traditional Timber Tradesman
Fürstenberg Holz, one of Europe’s
leading producers of export crates and
bespoke packaging, has adopted
Norbord’s Sterling OSB as one of its
main raw materials.
The company, based in Hüfingen,
Germany, which started using Sterling OSB in
1999, manufactures crates and boxes which
clients use to transport their products around
the world in standard shipping containers.
“Each of our customers has his/her own
idea of what a transport crate looks like and
what inherent qualities it should have”, says
Fürstenberg Holz sales manager, Michael
Luib. “But one thing all our customers want
is a crate that is strong and robust”, he adds.
Norbord has responded to market
requirements by offering OSB grades that
are specially tailored to the packaging sector.
OSB has a high load carrying capacity,
excellent bending strength and is easy to
machine. It is therefore an ideal packaging
material. From Fürstenberg Holz’s point of
view, the advantage of Norbord’s Sterling
OSB lies in the large sizes available which
allow it to cover and protect larger parts.
“We introduced a larger board size of
1,250/2,070 x 2,800 mm to the German
market about a year ago, specifically for the
packaging industry,” says Daniel Wagner,
Norbord product manager for packaging
systems. “Our customers have responded
positively to our large sizes because it
means packaging can be produced for
larger shipments without cutting waste,
making it cheaper.
“On top of that, there’s no need to patch
boards together and that avoids creating
‘rupture points’ that make the packaging
unstable” he adds.
Fürstenberg Holz uses Sterling OSB for a
huge variety of crate designs – it has around
10,000 CNC programmes for the differently-
shaped products the many customers
produce. The automobile industry is an
important sector and Fürstenberg Holz has
designed highly specialised crates for all
kinds of components - from windscreens to
engine assemblies.
The company has also developed a “folding
crate” made from Sterling OSB that is
delivered flat-packed to the customer who
then assembles it without the aid of tools
when preparing its goods for dispatch. This
considerably reduces the freight space
required to transport the crate to the customer.
Made from timber grown in sustainably-
managed European forests, Sterling OSB is
cost-competitive and has excellent strength
and stability thanks to its cross-directional
orientation of the thin slivers of wood veneer
that make up its structure.
Koch have a new addition to the Sprint
series of drilling and dowelling
machines – the Sprint Smart.
Born out of requests from customers for
a compact machine that allows for the
machining of longer work pieces when
required, without having to go to the
expense of a much larger machine. Koch
have achieved this by having side and
centre fences which can be manually raised
and lowered for reference positioning of the
workpiece; they can also be lowered level
with the table to allow longer workpieces to
be positioned on the machine and
processed. The table size between the outer
fences is 1,300mm giving solid support to
the workpiece. Customers also requested
the facility to drill and dowel but also to
have a vertical drilling station to cater for
Knock Down fittings if required.
With the vertical drilling unit on, it is
easy to make drawboxes on the machine
piece part style, without having to re-
position the workpiece; 3 sided or 4 sided
drawers can be made easily and
economically.
As the Sprint Smart comes with these
features as standard in a fixed specification
machine it has allowed Koch to use
standard components in the machine and
make it very competitively
priced. The machine is flexible,
productive and compact,
without compromising the
quality and accuracy that Koch
is renowned for.
Programming of the
machine is simple and on
screen graphics give a useful
aid to the operator.
The Sprint Smart machine
can be used for drilling panel
products or solid timber and is extremely
quick, with a drill/dowel speed of less than
two seconds per dowel.
Equipped with 4 workfields, horizontal
drilling, gluing and dowel insertion
together with a vertical drill unit and side
fences which can be lowered, the Koch
Smart machine would be very versatile in
any workplace.
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com34
Norbord’s OSB is First Choice for German Packaging Specialist
New From Koch
For further information:Tel: 01786 812 921
www.norbord.co.uk
For further information:Tel: 07989 420440
Email: [email protected]
INSTALLATION
Durable, quality products that stand
the test of time and offer innovative
solutions are what today’s specifiers
need, writes David Newton of Brio
UK, the leading bi-folding door
hardware manufacturer
Bi-folding doors are the rapidly growing
product sector in both domestic and
commercial settings where the illusion of
space created by ‘inviting’ the outside in
and the inside out is adding that little bit
of bit of extra magic that can lift a project
form the ordinary to the extraordinary.
Heavy, expensive timber and glass
doors, however, call for hardware that is
up to the job. They represent a purchase
that should last a long time so the best
possible quality hardware must be
sourced. Spending a little more on a
quality product with a long guarantee and
life expectancy is often more cost effective
in the long term.
Door hardware needs to be aesthetically
pleasing, durable and reasonably priced.
Architects and specifiers will always
demand products that tick many boxes –
visual appearance is important, as well as
durability of the product but in the main
they will be looking for a product that
looks good, and can also offer years of
trouble free use.
The product must be really easy to use;
if a small child cannot operate it easily
then it is not up to the job. Any quality
hardware manufacturer will have
minutely studied the chain of use when
designing its
products.
Choose a hardware
manufacturer that can
offer products that are
flexible and which is
willing to adapt its
products to work with
various materials
thereby allowing the
specifier the freedom
to think outside the
box.
BRIO is the global
brand leader with a full
range of architectural sliding & folding
door hardware for both domestic and
commercial sites and applications and is
based in a new purpose built site in
Newcastle where it will manufacture and
hold extensive stock levels.
We manufacture to order for our
customers as well as holding high levels
of stock to ensure product availability at
all time. We are targeting the architect,
joinery manufacturing and patio door
marketplaces and are currently in advance
discussions with a variety of strategically
placed stockists.
We are aiming to show that our range
of design-engineered products deliver
high performance whatever the extremes
of UK climatic conditions. Our sliding
and folding door hardware is made to last
and carries a variety of approvals which
either meet or exceed national and
international
standards.
Brio products being
launched include the
Weatherfold 4s – this
is a new generation of
the Weatherfold
Coastal Elite product,
which has been
available in the UK for
a number of years now.
Brio Weatherfold 4s
has been designed to
be secure – with added
security features, as
well as a new height adjustment system
for easy installation. Weatherfold 4s is
acknowledged to be a leading hardware
model for Bi-folding doors in Timber,
Aluminium and Aluclad materials.
Another Brio product is Timberoll –
this is a traditional system for straight
sliding timber patio type doors. It’s a
simple, well-engineered bottom rolling
system which offers a cost effective
alternative to lift and slide systems, and
incorporates the Brio interlocker product
for an effective weather seal.
Single Run from Brio is a well-
engineered top hung system available in a
number of weight capacities. It is suitable
for internal and external applications in
both Domestic and Commercial
developments.
Brio UK also offers a full 10-year
warranty on all products.
We are offering the UK a
comprehensive range of products. We are
a company focused on bringing
adventurous ideas to life, converting the
conceptual thoughts of our customers into
exciting reality. We are a solutions
company and a leader in design and
quality.
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 35See our website and interactive magazine www.p-j-production.com
For further information:Tel: 0191 229 1224
ww.briouk.com
PROFILE
Brio Opens The Door To Quality
James Latham started to introduce
Combilift 4-way forklifts into its
depots over ten years ago when it
decided to replace a combination of
sideloaders and counterbalance trucks
to achieve better storage density and
improve overall handling procedures.
The initial projects were so successful
that Combilifts are now Latham’s
preferred trucks, with around 50 in
operation at the company’s 10 sites
across the country. The latest addition
is a fleet of six 4 tonne machines for
the newly opened Leeds depot.
With a footprint of 69,000ft the Leeds
depot is slightly smaller than the former
Ossett site, but an impressive 39% more
storage space has been achieved. “The key
element for the extra capacity was the ability
to store the whole of our wide product range
as high as possible,” says Director Andrew
Wright, “and close collaboration with
Combilift’s Tommy Cadden and the
company’s design engineers, racking
provider Stakapal and Latham personnel
such as Andy Duffin enabled us to realise
this by installing the top beam of racking to
9.3m, the highest at any of our depots.
Guided aisle systems have also enabled us to
keep aisle widths at a minimum in certain
areas of the warehouse to further maximise
available space.”
James Latham has a standard
specification for its Combilifts – the C4000
4 tonne capacity LPG powered model,
which enables trucks to be moved around
from one depot to another if necessary. Due
to the demands of lifting full loads to the
top bay of racking it was initially thought
that larger trucks would be needed for this
particular application, but Combilift
engineers incorporated extra capacity into
the Leeds trucks, which have a 9.3m mast
height, whilst maintaining the same
physical dimensions as the rest of the fleet.
“This is just one example of Combilift’s
flexibility to accommodate our very specific
requirements,” says Andrew Wright.
The combination of guide rails fitted to
aisles and rollers on the trucks offer the
advantages of quicker access and travel down
the aisles for drivers as well as a greatly
reduced the risk of product damage.
Combilift and Stakapal came up with a new
system to replace the traditional steel
elements with new style larger diameter
polyurethane rollers and rubber mounted
lead-in sections which improves shock
absorption, reduces steel on steel wear and
which also results in much quieter operation.
Other features on the Combilifts include
hydraulically operated fork positioners for
easy in-cab adjustment to handle the
varying sizes of panel products and packs of
timber, and telescopic forks have been fitted
to some of the trucks for manouevering
larger panels with a depth of 2050mm.
“Most of our customers don’t want to
hold stock until they need it, and same day
or next day delivery is a typical scenario,”
says Andrew Wright, “so efficient handling,
storage and picking is vital. As well as the
excellent storage density in the new
premises we have doubled and in some
cases tripled throughput, eliminated double
handling and picking errors to offer
excellent customer service. This is down to
the efforts of all involved in this six month
project which was completed with no delays
and is just what we envisaged.”
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com36
Six More Combilifts for James Latham
For further information:Tel: 07870 976 758
Email: [email protected]
INSTALLATION
Phone: 01905 793 550 · Phone IRL: 0044 1905 793 552 · Fax: 01905 793 [email protected] · [email protected] · www.ostermann.eu
Ostermann UK Ltd · Stonebridge Cross Business Park · Unit 104 Pointon Way · Droitwich · WR9 0LW· UK
Europe’s largest range of edging
In September: The newEdging Catalogue 2013/2014
Ostermann’s Edging Catalogue – more than 500 pages including matching edgings to more than 30 European board manufacturers and all the accessories for perfect edging.
Visit us at W12 on Stand 6C410 !
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com38
At W12 Magi-Cut Software will present
Magi-Cut Modular Version 9, a
software package which has been
developed over the last thirty years
and comprehensively handles the
optimising and production
requirements associated with medium
and large woodworking machines such
as CNC pressure beam saws and CNC
nesting routers.
For the first time Magi-Cut Software will
also be showing their Express optimiser.
This low cost entry level package is ideally
suited to the requirements of woodworking
companies cutting sheets of material with a
table saw. The Express package is available
on a free 30 day trial, and allows the user to
enter a job comprising a list of part sizes to
be cut, a choice of sheet sizes to be used,
the saw blade thickness, grain direction if
applicable, and other basic settings such as
board trims. From this information
Express will calculate the most efficient
cutting patterns and print out fully labelled
drawings with cutting instructions for the
saw operator. Visitors to W12 are invited to
bring along a sample job or cutting list, and
put Express through its paces.
Magi-Cut Software are in hall 6 Working
with Design stand A122 – adjacent to
ArtiCAD and EQ software, and will be
demonstrating the interface between Magi-
Cut and the design and business
management software from ArtiCad and
EQ Software respectively. Visitors to the
Homag stand in hall 7/8 W12 Working with
Wood will be able to see Magi-Cut
demonstrated and linked online to the
Holzma beam saw.
Magi-Cut Introduce their Express Optimiser
For further information:Tel: 0117 927 6353
Email: [email protected]
Trade Mouldings will use the opportunity of W12
Working with Design to launch a new door design.
The new door has a lacquered finish polished to a high gloss
and initially available in white (Larissa) or ivory (Lucerne). The
design incorporates an integral J-grip handle that has been
routed into the face complying with the strong trend for
handless kitchen designs.
Aside from the new door that Trade Mouldings stand will
feature Vinyl wrapped membrane pressed designs, 5-piece
vinyl wrapped doors, timber doors and the super high gloss
acrylic Odyssey doors with laser-applied edgings – these have
been entered into the Design in Manufacturing Awards
(DIMA) competition.
Trade Mouldings toLaunch New Door at W12
For further information:Tel: 01706 753600
Email: [email protected]
The new Magi-Cut Modular V9 dashboard
W12 PREVIEW
Magi-Cut Express – cutting pattern preview
The new high gloss lacquered door withhandless design will be launched at W12
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 39See our website and interactive magazine www.p-j-production.com
EDP, leading UK supplier of quality
foils, veneers, edging and components,
will use the occasion of W12
Working with Design in
October to introduce a
“working” exhibit where
visitors can move displays
around and experiment with
putting different colours,
texture, finishes and patterns
together.
“We don’t want the stand to be
merely a shop window” explains EDP’s
Terry Willett “it’s important for visitors
to become involved with the whole
design concept and walk away with
something tangible for the future”.
EDP say that the entire philosophy of
the Working with Design concept as show
where cutting edge design can be evaluated
and appreciated for its central contribution
to manufacturing is what the industry
has been looking
for. “We will only be showing new
innovations and designs on the stand –
materials that can take UK manufacturing
forwards.”
“The introduction of the Design in
Manufacturing Awards (DIMA) is very
exciting and positive,” adds Terry Willett
“EDP will definitely be entering this
Awards completion.”
Active design from EDP at W12
W12 PREVIEW
For further information:Tel: 01702 618877Fax: 01702 618811
Email: [email protected]
At W12 Working with Design multi-
national board manufacturer FINSA
will introduce (at what will
effectively be an international
launch) their new SuperPan STAR
high performance lightweight board.
The FINSA stand will focus on two
distinct aspects of their contemporary
production – lightweight board products
and the very latest colours and trends in
melamine surfaces that reflect all the
current international trends seen at the
latest worldwide exhibitions.
Within the context of advances and
advantages of lightweight boards FINSA
will launch SuperPan STAR. The patented
FINSA SuperPan board is already a much
vaunted success offering manufactures a
number of significant advantages in final
product quality. SuperPan is an integrated
3-component board produced in a
continuous process where a core of
chipboard is surfaced top and bottom with
MDF-like fibers giving a smooth surface
that will accept various lacquered or foil
finishes to ensure a blemish-free quality
with detrimental effects like “orange peel”.
SuperPan STAR has been developed in
conjunction with German chemical giant
BASF so that the chipboard core is infused
with the new Kaurit LIGHT polymer
substance in a foamed process that results
in a high performance board that is up to
30% lighter than other SuperPan or
chipboards but machines in exactly the
same way and offers superior performance
in terms of bending or sagging
characteristics.
The advantages to manufacturers are
multifold and the Kaurit LIGHT polymer
component offers further environmental
considerations.
FINSA have entered SuperPan STAR in
the Design in Manufacturing Awards
(DIMA) competition and the company will
deliver a seminar on each day of the
exhibition in the special Presentation
Theatre area. On Sunday 7 SuperPan STAR
will be launched in the context of a
presentation on lightweight boards. On
Wednesday 10 BASF will present on the
Kaurit LIGHT technology in SuperPan
STAR including the environmental
benefits.
FINSA to Launch Super Lightweight Board at W12
For further information:Tel: 0151 651 2400
Email: [email protected]
Cyprus Metal ST1102 A16 ML
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com40
Ostermann’s new catalogue will be
coming out in September. Europe’s
largest range of edgings spread over
500 pages combined with plenty of
useful info about every facet of the
world of edgings. The catalogue boasts
numerous new features, as well as
edgings to match the latest
collections from Europe’s leading
panel manufacturers and a huge
selection of practical accessories.
As did its predecessors, the large
2013/2014 Edgings Catalogue dedicates
itself solely to the world of edgings and
their application. For the second time it will
be appearing in a 5-language edition. Apart
from English, the catalogue is also issued in
German, Dutch, French and Italian.
Readers who are already accustomed with
and value the Edgings Catalogue will
appreciate the familiar layout and the
various improvements.
More service, easier to useThe coherent way in which sections are
arranged according to the various edging
materials and the front pages specially laid
out for each section help the furniture
manufacturer navigate to the information
they need. The required section can be
quickly found with the user-friendly cut tab
format.
The front pages for each section provide
copious introductory information, an
illustrative practical application example
and detailed data on the particular material.
Each section features a two-page
explanation of the various services available
for the product, thus providing a coherent
overview of the relevant service package.
The applicable services can also be called
up with a smart phone or tablet by
scanning the QR code located in the page
headers. Each section is rounded off with
useful application data. The new key word
listing format on the relevant pages
provides an even clearer overview making it
easy to make comparisons.
Ostermann has added another new and
really helpful feature by listing the available
thicknesses alongside images of the various
edgings. Because Ostermann supplies all
plastic edgings in every required width, it is
not necessary to state the particular widths.
The catalogue makes placing orders simple
with the easy-to-read fold-out page
containing an overview of all available
materials and their various properties,
along with an explanation of Ostermann’s
order numbering system (providing key
information at first sight).
Numerous production innovations and additions
As an innovator in the furniture
manufacturing industry, Ostermann is
ahead of the field when it comes to the
latest styles. Our product managers have
their eyes and ears open in the marketplace,
staying ahead of the pack and they have no
hesitation in acting decisively to attractively
shape our product ranges. For example, the
catalogue contains edgings in 13 of the
W12 PREVIEW
Ostermann’s New EdgingCatalogue 2013/2014
most popular finishes, including super
matt. These are listed on page 89 and are
available in thicknesses of 1 mm. On page
107 the furniture manufacturer can find
futuristic LED edgings for creating
impressive lighting effects and Ostermann
can of course deliver wholly natural
products too –stylish solid wood edgings
such as the attractive "Wave" and "Saw"
finishes are available on page 147.
An addition to its ABS edgings,
Ostermann now supplies numerous extra
finishes across its entire melamine range.
True to the motto “When others call it a day
– Ostermann is just getting going”, the
melamine range will also continue to grow
considerably in future. Page 118 contains
numerous colours and patterns frequently
delivered by Ostermann to match ABS
finishes.
The adhesive section has been seen some
extensive product additions. The edging
itself is as multi-faceted as the
requirements for its application. It is
precisely for these individualised
applications that Ostermann is able to
supply the right glue. Apart from well-
established adhesive products, page 265
contains many special adhesives for a range
of applications within the workshop.
Find the edgings you want when you want
The printed version of Europe’s largest
Cross Reference List, an “edging for every
board”, is the ideal method for placing
orders, particularly in the workshop.
Reason enough for Ostermann to expand
this section. This is where the specialist will
not only find the right edging to match
patterns from 32 of the leading wood
materials manufacturers such as Egger,
Polyrey or Finsa, but as of now customers
are also given a corresponding page
reference to the edging photo in the
catalogue. This provides a direct, visual
image and radically speeds up the search
process. The variety of edging-finishes has
also been expanded. The numerous links in
this section, the listing of the finish
number in the Cross Reference List and the
use of the fold-out section in the front of
the catalogue all combine to make it easier
to find the right edgings and for those who
prefer the online version... the finish for the
required edging can be called up in
Ostermann’s Online Shop along with a
detailed image. Apart from edgings, the
customer will also find correction pens and
a further 38 manufacturers with edging
references assigned to them.
With the extensive catalogue containing
information on all things concerning panel
finishes, Ostermann, as the leading edging
and profile specialist, is providing the
furniture manufacturer with everything
required for edging applications. The
catalogue will be automatically sent to
Ostermann customers and potential
customers in the first week of September. It
will of course be delivered to anyone else
who requests it.
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 41See our website and interactive magazine www.p-j-production.com
Tel: 01905 793550Email: [email protected]
www.ostermann.eu
W12 PREVIEW
David Clouting Ltd will be exhibiting
in Hall 6 on stand B330 in the
Working with Design area of the W12
exhibition within Birmingham’s NEC,
with the company’s presence again
showing the progress achieved in its
ever-expanding range.
The business has established an
unrivalled reputation for its professional
services, further combined with
complimentary options, such as matching
PVC and melamine edge banding. Its
designs also include the benefit of exact
matching with those of the leading panel
manufacturers.
Products displayed on the company’s
stand will include its highly popular
Decofoil designs. Its most recent
introductions include the Saw Cut versions
of Golden Odessa Oak (UYJ02-T3) and
Grey Odessa Oak (UYJ01- T3). Decofoil
includes an extensive choice of natural
woodgrains, high gloss and Innoface solid
colours.
Visitors to W12 will also be able to view
the company’s Interior Film stock
collection, which can be applied to virtually
any substrate, allowing the company’s
clients to transform any room setting,
furniture and fittings quickly and easily.
Examples include woods, stones, leathers,
metals and decorative designs.
These could easily be combined with the
company’s Glasen interior glass film, also
displayed at W12. This is another David
Clouting product with a considerable range
of applications.
Further proof of the company’s diversity
is provided by the Woozen collection of
Eco Cladding and decking systems.
Virtually maintenance free, the Woozen
range is made from natural wood and eco
friendly olefin.
The Zenolite Plus selection of hard
coated, high gloss acrylic panels, also
shown at W12, can be utilised to provide
dramatic highlights and tasteful additions
to any domestic or commercial setting.
These provide a highly effective alternative
to back painted glass.
David Clouting continues to grow and
invest in its operations, recently moving to
new headquarters at Unit 650, Skyline 120,
Braintree, Essex CM77 7AA.
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com42
David Clouting Set to MakeSpectacular Impact at W12
For further information:Tel: 01376 518037
www.davidclouting.co.uk
W12 PREVIEW
James Latham has become the
exclusive distributor for LG HI-
MACS® in Ireland.
James Latham has been working
with LG Hausys for the past eight
years in the UK and in that time has
taken sales of the solid surface
product to more than £5m per annum.
Its experience and expertise within
this market has made it one of the
most important strategic partners for
HI-MACS® in Europe.
Having recently opened a new 66,000
ft², £5m, state-of-the-art depot in Leeds
- where the majority of LG HI-MACS®
stock is held, James Latham now carry
the highest stock level of the material
in Europe, ensuring orders can be
fulfilled quickly and efficiently to
any part of the UK or Ireland.
In addition, Lathams have recruited
a new product manager for Ireland,
Fraser McLauchlan, who
will be totally focussed on
servicing existing customer
accounts as well as
developing new accounts
both in the north and south
of Ireland.
Chris Sutton, Director of
James Latham commented, “As
a strategic partner of LG
Hausys we are delighted to
have increased our
responsibility even further
to include Ireland. There is
real potential here to grow
the market and with on the
ground expertise, coupled with one of
the widest product ranges and one of
the fastest delivery services available,
we are in pole position to capitalise on
this.”
HI-MACS® is supplied in thicknesses
of 12mm, 9mm and 6mm and is suited
for use in both kitchen and bathroom
environments. The full palette of 113
colours is available for download in
CAD software-compatible format from
www.himacsuk.co.uk
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 43See our website and interactive magazine www.p-j-production.com
Irish Eyes Smile on James Latham
DECORATIVE SURFACES
DECORATIVE SURFACES
Cramlington 1st July 2012. Renolit is
proud to announce two quite individual
and striking textured printed designs as
new additions to the Renolit Covaren
3D global stock range. Mountain Larch
Cappuccino P and Luan Oak Tobacco
both meet the demand for designs
which harmonise with up-to-date
natural shades of coffee & tobacco plus
add texture and style to a variety of
room settings.
Mountain Larch Cappuccino P is a deep
embossed linear textured design. Restrained
planks separate alternating sections of bi-
directional graining creating movement
within the design. It will suit a variety of
different furniture styles and rooms
including bedrooms, living areas and
kitchens.
Luan Oak Tobacco impresses with its
natural looking 3-dimensional crosshatched
design embellished with a saw cut emboss.
Large planked cathedrals add structure to
finely grained sections, which alternate with
stripes and gentle growth rings. The
horizontal Saw Cut surface structure gives
the tri-dimensional character of this décor.
Mountain Larch Cappuccino P and Luan
Oak Tobacco were introduced by Renolit into
the global 3D stock range with a number of
other exciting new Renolit Covaren &
Renolit Alkoren 3D decors for 2012.
Consisting of 16 different woodgrain effects,
printed effects and textures, and 10 high
gloss solid colours they can be divided into 7
groups comprising of:
Elm - Swiss Elm in 3 colours, 1 in high gloss
Walnut - Pacific with a light and dark choice
Textured solid colours - Elegant Ash, Okasha
and Saw Cut textured surfaces
Conifer - Mountain Larch Cappuccino P
Oak - Luan Oak Tobacco, Trojan PA and
Foscari Oak Pale Nat
Special effects - Modern effects of Cobra and
Moulins SC
High gloss solid colours - Modern selection
of 10 fashionable colours
All the new designs can be seen in the A4
Renolit Highlights collection binder or
within the handy A6 sized 3 part complete
range set off Renolit Covaren, Renolit
Alkoren And Renolit Solid Colours.
We hope you like our new designs. Torequest samples or any further information:
Tel: 01670 718222 Email: [email protected]
www.renolit.com/design
Neutral Naturalness Textured Renolit designs in tasteful cappuccino tones
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com44
Mountain Larch Cappuccino Luan Oak - Tobacco
from high gloss
to woodgrain
an extensive range of finishes
T: +44 (0)1376 518037 E: [email protected] W: www.davidclouting.co.ukDavid Clouting Ltd. Unit 650, The Hub, Skyline 120, Avenue West, Braintree, Essex CM77 7AA
Call today for information on our product range
Deco Foilfrom
3D forming veneers range of High Gloss, Woodgrain and Matt Paint finishes to ensure that kitchen, bedroom, bathroom, living and commercial areas canbe designed where the product compliments and adds to the visual experience. 2D versions of the vinyls are available for profile wrapping. Applied toMDF, Deco Foil expands the possibilities of furniture design.
DECORATIVE SURFACES
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com46
Friday 22nd June marked the official
opening of a brand new production
facility for Decorative Panels Limited.
Local MP, Craig Whittaker, invited George
Osbourne to the £10 million manufacturing
plant on 6th August when the Chancellor
was visiting West Yorkshire.
George Osbourne said: “I was delighted
to be invited to visit these businesses and
was incredibly impressed with the facilities
that lie in the heart of the Calder Valley.
These businesses are succeeding,
expanding and trading around the world,
which is something the entire region
should be proud of.”
Craig commented: “The Chancellor’s visit
to West Yorkshire reflects the strength and
depth of our manufacturing base and what
the Calder Valley has to offer. He was left in
no doubt about the excellence and innovation
that exits across businesses and their role in
helping drive and grow the economy. Local
businesses are committed to delivering high
quality products and services and they should
be applauded for their investment,
particularly in jobs which are needed to
support the local economy and enable it to
thrive”. There are 400 people are employed
across the three premises.
Following the factory tours, the Chancellor
joined an invited audience of business
leaders and Conservative Party Chair,
Baroness Warsi, for lunch at Decorative
Panels before taking part in a manufacturing
led Q&A session with invited business
guests.
Craig added: “A range of issues were
covered in the Q&A session and it gave the
Chancellor a real flavour of the regions
manufacturing pride and prowess when it
comes to competing on the global stage.”
The factory, based on Lowfields Business
Park in Elland, is built on a 12.5 acre site and
George Osbourne Visits DecorativePanels New Manufacturing Facility
DECORATIVE SURFACES
SEPTEMBER/OCTOBER 2012 Panel & Joinery Production 47See our website and interactive magazine www.p-j-production.com
extends to some 175,0002ft.
The site is equipped with state-of-the-art
chipboard processing equipment and
represents one of the most advanced facilities
of its kind in Europe.
Decorative Panels Components is part of
the Decorative Panels Group of companies
and specialises in the production of high
volume kitchen and bedroom carcase and
fascia with capacity of over 600,000 panels
per week.
Group Managing Director, Guy Metcalfe,
commented that: “The development of such a
facility is testament to our commitment to
manufacturing in the UK utilizing the most
advanced and efficient technologies. We have
always viewed such investment as key to
competitive success in what is a global
market.”
Group Chairman, Steve Gaunt, stated that:
“Today sees the culmination of what has been
a seven year plan. We have brought the best
of British manufacturing for our sector,
positioning ourselves to be ready for the
future with capacity and efficiency that rivals
the best in the world.
• The Decorative Panels Group is privately
owned operating three totally
autonomous and yet vertically integrated
businesses, Decorative Panels
Lamination Ltd, Decorative Panels
Components Ltd and Decorative Panels
Furniture Ltd.
• With origins tracing back as far as 1907
the Decorative Panels Group has evolved
from a local cabinet maker and coffin
manufacturer into a group that has a
total production space within five
factories of some 50,000m , employs
over 400 staff and continues to grow year
on year.
• The combined turnover of the three
trading companies for financial year
2011/12 exceeded £80 million.
• The businesses all operate within the
sector of furniture and allied industries
with all three companies being tier 1 and
tier 2 suppliers through manufacturers,
distributors and direct to retail.
New innovative methods of manufacture
are currently being explored by Decorative
Panels Lamination that may lead to
significant investment and expansion in
2013.
For further information:Tel: 01484 658341
Email: [email protected]
Panel & Joinery Production SEPTEMBER/OCTOBER 2012 See our website and interactive magazine www.p-j-production.com48
DECORATIVE SURFACES
Renolit is proud to introduce Trojan
PA (46707) in to its Renolit Covaren 3D
global stock range. Trojan PA is a
finely defined oak reproduced in a
highly modern and warm colour way.
Trojan PA has a warm golden brown
colour with a pearl element giving added
vitality to the finished result. This modern
fresh oak is an intricate design with subtle
planking, fine wood-ticking and precise
detailing bringing depth and variety to the
overall effect. The design is finished with a
new wood touch emboss giving the product
a very realistic natural feel.
It matches Kronospan D6672 and has
completed Finish Performance Testing by
FIRA satisfying the requirements for the
assessment of domestic kitchen worktops,
doors and other panel elements as specified
in BS6222 part 3 1999.
Trojan PA was introduced by RENOLIT
into the global 3D stock range with a
number of other exciting new RENOLIT
COVAREN & RENOLIT ALKOREN 3D
decors for 2012. Consisting of 16 different
woodgrain effects, printed effects and
textures, and 10 high gloss solid colours
they can be divided into 7 groups
comprising of:
Elm - Swiss Elm in three colours, with one
in high gloss
Walnut - Pacific with a light and dark choice
Textured solid colours - Elegant Ash,
Okasha and Saw Cut textured surfaces
Conifer - Mountain Larch Cappuccino P
Oak - Luan Oak Tobacco, Trojan PA and
Foscari Oak Pale Nat
Special effects - Modern effects of Cobra
and Moulins SC
High gloss solid colours - Modern selection
of 10 fashionable colours
All the new designs can be seen in the A4
Renolit Highlights collection binder or within
the handy A6 sized 3 part complete range set
off Renolit Covaren, Renolit Alkoren and
Renolit Solid Colours.
We hope you like our new designs. Torequest samples or any further information
please contact:Tel: 01670 718222
Email: [email protected]/design
Trojan PA Natural Oak brings open strong character with a realistic finish
Trojan PA
Brackets (Furniture Fittings) Dudley Tool Presswork & Engineering Co. Ltdwww.dudley-tool.co.uk
CNC MachinerySCM Group UK Ltdwww.scmgroup-uk.com
Dust Control SystemsCades Ltdwww.cadesltd.co.uk
WoodWaste Control Engineering Ltdwww.w-w-c.co.uk
Workplace Safety Mechanical Serviceswww.workplacem.co.uk
EdgebandersAllwood Machinery Essex Ltd (inc Interwood)www.interwood.co.uk
SCM Group UK Ltdwww.scmgroup-uk.com
Machining Centres (CNC)SCM Group Ltdwww.scmgroup-uk.com
MFC Panel ProductsVC Industries Ltdwww.vciltd.co.uk
Panel Saws (Beam)Allwood Machinery Essex Ltd (inc Interwood)www.interwood.co.uk
SCM Group UK Ltdwww.scmgroup-uk.com
Schelling UK Ltdwww.schelling.co.uk
Panel Saws (Sliding Table)SCM Group UK Ltdwww.scmgroup-uk.com
O’Meara, J&C Ltdwww.ukpanelsaws.co.uk
Panel Saws (Vertical)Striebigwww.tmpartnership.co.uk
Panel HandlingAllwood Machinery Essex Ltd (inc Interwood)www.interwood.co.uk
SCM Group UK Ltdwww.scmgroup-uk.com
Pocket RoutersATA Engineering Processeswww.ataeng.com
PressesAllwood Machinery Ltd (inc Interwood)www.interwood.co.uk
Power ToolsCD (UK) Ltdwww.cdukltd.co.uk
Routers (CNC)ATA Engineering Processeswww.ataeng.com
AXYZ Internationalwww.axyz.co.uk
SCM Group UK Ltdwww.scmgroup-uk.com
Routers (CNC - 5 Axis)ATA Engineering Processeswww.ataeng.com
MAKA Machinery UK Ltdwww.maka.com
Router CuttersATA Engineering Processeswww.ataeng.com
Sanders (Speed)Allwood Machinery Ltd (inc Interwood)www.interwood.co.uk
Sanders (Wide Belt)Boere Machinefabriek bvwww.boere.nl
Kundig Ltdwww.kundig.co.uk
SCM Group UK Ltdwww.scmgroup-uk.com
Solid Surface ProcessingEquipmentCD (UK) Ltdwww.cdukltd.co.uk
SoftwareAlphaCamwww.planitmanufacturing.co.uk
Spray Finishing EquipmentITW Industrial Finishingwww.itwifeuro.com
ToolingATA Engineering Processwww.ataeng.com
Throughfeed DrillsSCM Group UK Ltdwww.scmgroup-uk.com
Veneer Cutting & SandingEquipmentCD (UK) Ltdwww.cdukltd.co.uk
Veneering EquipmentAllwood Machinery Essex Ltd (inc Interwood)www.interwood.co.uk
Wide Belt Sanders, Polishers &Buffing MachinesCD (UK) Ltdwww.cdukltd.co.uk
Woodworking MachineryBiesse Group UK www.biesse.co.uk
Weinig Group UKwww.weinig.com
Woodworking Tooling & Machinery Ltdwww.wadkinmachinery.com
Woodworking Machinery (New & Used)Allwood Machinery Essex Ltd(inc Interwood)www.interwood.co.uk
Daltons Wadkinwww.daltonswadkin.com
J&C O’Mearawww.ukwoodworkingmachinery.co.uk
Wood Burning EquipmentWoodWaste Control Engineering Ltdwww.w-w-c.co.uk
Panel & Joinery Production lists the major manufacturers and suppliers to the UKwoodworking industry under easy-to-find product headings. If you think that yourcompany should be included in this list, please contact us immediately.
YOUR WEBSITE CAN BE SEEN BY OVER 5,000 READERSOF PANEL & JOINERY PRODUCTION MAGAZINE IN THE UK & IRELANDAND WORLDWIDE ON OUR WEBSITE WWW.P-J-PRODUCTION.COM
To book your entry:
Tel/Fax: 020 8366 3331
e-mail: [email protected]
Now you have a choice
Kentwood Moulders
Advanced Machinery Services (AMS) has established a strong track record as a provider of first class service support in the UKwoodworking industry. Now, in a deal set to transform the UK marketfor solid wood machinery, AMS has won the exclusive distributionrights for Kentwood, the No.1 selling moulder in the USA.
Kentwood moulders deliver quality performance, improved efficiency,smoother surfaces and greater productivity. The sturdy, high qualitymachine design ensures increased accuracy and trouble-free performance, all at an exceptional value never before available.
The Kentwood range has been developed by the world's largestindependent distributor of solid wood machinery, Stiles Machinery Inc. With a turnover in excess of $300 million, it offers a Total ProductionSolutionsSM approach to manufacturing, from equipment integration and manufacturing consulting to education, service and parts.
Finally, you have a choice. No longer are you restricted to buying high priced European solid wood machines. At AMS we can offer you everything from a single moulder, planer, grinder or rip saw to Total Production SolutionsSM at a price to suit your budget.
For details of your nearest dealer call 0844 844 9949 or email [email protected]
For more information visit www.advancedmachinery.co.uk
Advanced Machinery Services LtdSkeffington MillUppingham RoadSkeffingtonLeicestershire LE79YE
T. 0844 844 9949 F. 0844 844 4744 E. [email protected]
See us at