PANEL PROCESSING - Woodworking Network · 2017. 1. 27. · Colonial Saw Co. Inc., 122 Pembroke St., P.O. Box A, Kingston, MA 02364 (781) 5854364 - . Striebig Compact 4 Up to 2 units

PANEL PROCESSING PANEL SAWS REFERENCE CHART

Product Name/No

Vert

ical

Sl

idin

g Ta

ble

Bea

m

Ang

ular

Motor hp

Man

ual

Sem

iAut

omat

ic

Aut

omat

ic

NC or CNC

Capacity per 8 hr. Shift

Work Piece Size

Scor

ing

Type of Tilt

Type of Hold Down

No.

of O

pera

tors

Special Features

Hyd

raul

ic

Man

ual

Pneu

mat

ic

redbookonline.com RED|BOOK

Adwood Corp., P.O. Box 1195, High Point, NC 27261 (336) 884-1846 www.adwood.com Elcon D-Series ■ 3 ■ 4' x 8' 1 Fast changeover. Easy plunging.

Elcon DX-Series ■ 4 ■ 7’ x 13’ ■ Pneumatic 1 Reinforced construction. Prog.rail.

Elcon DSX-Series ■ 7.5 ■ 7’ x 17’ ■ Pneumatic 1 Up to 3” of panel thickness.

Elcon DSXE-Series ■ 7.5 ■ 7’ x 60’ ■ Pneumatic 1 Up to 5” of panel thickness.

Casolin Astra 3000 ■ 4.8 ■ 10’ x 10’ ■ Pneumatic avail. 1 1

Casolin SE 400 ■ 9 ■ 10’ x 10’ ■ Pneumatic avail. 1 1

Casolin SE 400NT ■ 9 ■ 10’ x 10’ ■ Pneumatic avail. 1 1 Motorized blade height & tilt, dig. readout for tilt angle.

Casolin Digit NT ■ 9 ■ 10’ x 10’ ■ Pneumatic avail. 1 1 See above.

Casolin Digit NTSQ ■ 9 ■ * 10’ x 10’ ■ Pneumatic avail. 1 1 See above plus motorized rip fence.

Casolin Digit 5CNC ■ 9 ■ NC ■ Pneumatic avail. 1 1 All functions controlled by NC.

Atlantic Machinery Corp., 36 South End Plaza, New Milford, CT 06776 (860) 354-7200 www.atlanticmach.com Putsch/Menicon Univer SVP EL3200 Univer SVP133 Univer SVP145 Univer SVP950A Univer SVP145A

■ ■ ■ ■ ■

4.8, 6, 7.5 4.8, 6, 7.5 4.8, 6, 7.5 7.5 7.5

■ ■ ■

■ ■

Medium Medium Medium High High

5’ x 10’ 5’ x 12’ 5’ x 10’ 6’ x 12’ 6’ x 14’ 6’ x 12’

Opt. Opt. Opt. Opt. Opt.

1 All Univer saws have a one-piece heavy-duty welded steel frame, electrically operated shifting grid, pop-up rollers, opt. micro- adjustable scoring unit; 0.1mm over 1 meter length guaranteed with factory installation. Solid Surface/VUniver grooving models available.

Univer SVP145/45° ■ 4.8, 6, 7.5

■ Medium 6’ x 12’ Opt. 1 Cuts at 45° bevel as well as at 90° positions.

Paoloni S260 ■ 6.6 ■ Medium 8’ x 8’ Driven ■ Eccentric 1 Same as Univer SVP145/45°.

Paoloni S300 ■ 7.5 ■ Medium 10’ x 10’ 1 hp ■ Eccentric 1 Same as above.

Paoloni P45 ■ 9 ■ High 8’ x 10’ 1 hp ■ Eccentric 1 Electric blade lift/scoring adjustment.

Paoloni P3200S ■ 9 ■ High 10’ x 10’ 1 hp ■ Eccentric/ Electric 1 Same as above + electric blade tilt.

Paoloni P3200A ■ 9

■ High 10’ x 10’ 1 hp ■ Eccentric/ Electric 1 Same plus electric moving rip fence.

Biesse America, P.O. Box 19849, Charlotte, NC 28219-9849 (704) 357-3131 www.biesseamerica.com Selco Sektor 450 ■ 12 ■ CNC 75mm Projection up to 13.5’ ■ Pressure beam 1 PC based control, helical rack &

pinion saw carriage drive, integrated side alignment.

Selco Sektor 470 ■ 18 ■ CNC 90mm Projection up to 13.5’ ■ Pressure beam 1 PC based control, helical rack & pinion saw carriage drive, integrated side alignment. Servo drive blade raising.

Selco WN 610 ■ 20 ■ CNC 95mm Projection up to 13.5’ ■ Pressure beam 1 PC based control, helical rack & pinion saw carriage drive, integrated side alignment. Servo drive blade raising



Selco WNT 610 ■ 20 ■ CNC 95mm Projection up to 13.5’ ■ Pressure beam 1 Rear/Side loading lift table, PC control helical rack & pinion saw carriage drive, pat. quick change, electronic scoring adj. Servo blade raising.

Selco WNT 630 ■ 25 ■ CNC 108mm Projection up to 13.5’ ■ Pressure beam 1 Rear/Side loading lift table, PC control helical rack & pinion saw carriage drive, pat. quick change, electronic scoring adj. Servo blade raising


http://www.adwood.com/�

http://www.atlanticmach.com/�

http://www.biesseamerica.com/�


Product Name/No

Vert

ical

Sl

idin

g Ta

ble

Bea

m

Ang

ular

Motor hp

Man

ual

Sem

iAut

omat

ic

Aut

omat

ic

NC or CNC


Work Piece Size

Scor

ing

Type of Tilt

Type of Hold Down

No.

of O

pera

tors

Special Features

Hyd

raul

ic

Man

ual

Pneu

mat

ic




Selco WN 750 ■ 40 ■ CNC 152mm Projection up to 13.5’ ■ Pressure beam 1 PC based control, helical rack & pinion saw carriage drive, Servo side alignment/dust extr.. Servo drive blade raising



Selco WNT 750 ■ 40 ■ CNC 152mm Projection up to 13.5’ ■ Pressure beam 1 Rear/Side loading lift table, PC control helical rack & pinion saw carriage drive, pat. quick change, electronic scoring adj. Servo blade raising, Servo side alignment/dust extr.

Twin Pusher 1.2 Sektor Series

■ 12 / 18 ■ CNC 75 – 90 mm Projection

up to 13.5’ ■ Pressure beam 1 Uniquely designed, non-motorized Independent 2 gripper system w/side support. Productivity increase up to 25%

Twin Pusher 2.1 6 Series


up to 13.5’ ■ Pressure beam 1 Independent Servo controlled single gripper w/side movement and support. Simultaneous stagger and rip/cross cut ability.

Twin Pusher 2.2 7 Series


up to 13.5’ ■ Pressure beam 1 Two Independent Servo controlled grippers w/side movement and support. Simultaneous stagger and rip/cross cut ability.

WNA 600 Synchrologic

■ 40 ■ CNC 145mm Projection up to 13.5’ ■ Pressure beam ? Compact angular

WNA 600 Shuttle System

■ 40 ■ CNC 145mm Projection up to 13.5’ ■ Pressure beam ? Patented shuffle transfer from Rip to Cross

Cantek America Inc.,PMB #104,1124 Fir Ave.,Blaine,WA 98230 (888) 982-2683 www.cantekamerica.com P405M ■ 7.5 & 1 ■ 5’ by 10’

panels ■ Manual 1 Power blade rise/fall & manual tilting. 16’ blade capacity

P400E ■ ■ NC 5’ by 10’ panels ■ Manual 1 3-axis NC control for power rip

fence, blade rise/fall & tilting. (2) digital readouts on crosscut fence and (1) for angular adjustment

Casadei Busellato, 4322 Piedmont Pkwy., Greensboro, NC 27410 (336) 854-1211 www.delmac.com Casadei SC315 ■ 6.6 to 9 ■ 2600x2600mm

3800x3200mm ■ ■ Eccentric clamp 1 Alum. alloy carriage, precision hard. & rectified steel ways, ball bearing syst.

Casadei SC350M ■ 6.6 to 9 ■ 2600x2600mm 3800x3200mm ■ Eccentric clamp 1 Motorized movement of height &

tilt on saw blade. Ball bearing system

Casadei SC400 ■ 9 to 12 ■ 2600x2600mm 3800x3200mm ■ ■ Eccentric clamp 1 Alum. alloy carriage, precision

hard. & rectified steel ways, ball bearing syst.

Casadei SC400A ■ 9 to 12 ■ NC 2600x2600mm 3800x3200mm ■ Eccentric clamp 1 Auto prog. movement of height &


Casadei SC450 ■ 9 to 15 ■ 2600x2600mm 3800x3200mm ■ ■ Eccentric clamp 1 Alum. alloy carriage, precision

hard. & rectified steel ways, ball bearing syst.

Casadei SC450A ■ 9 to 15 ■ 2600x2600mm 3800x3200mm ■ Eccentric clamp 1 Auto prog. movement of height &


Casadei AXO 65 3200 ■ 12 ■ CNC Var. based on

cutting pattern. 3200mm ■ Pneumatic beam & grippers 1 Steel plate saw carriage positions

fast via belt drive on 8 hardened V rollers, indep. main & scoring motors w/vertical movement of main saw. PC/PLC integrated control syst.


cutting pattern. 3800mm ■ Pneumatic beam & grippers 1 Same as above



http://www.cantekamerica.com/�

http://www.delmac.com/�








Product Name/No

Vert

ical

Sl

idin

g Ta

ble

Bea

m

Ang

ular

Motor hp

Man

ual

Sem

iAut

omat

ic

Aut

omat

ic

NC or CNC


Work Piece Size

Scor

ing

Type of Tilt

Type of Hold Down

No.

of O

pera

tors

Special Features

Hyd

raul

ic

Man

ual

Pneu

mat

ic




Colonial Saw Co. Inc., 122 Pembroke St., P.O. Box A, Kingston, MA 02364 (781) 585-4364 www.csaw.com Striebig Compact ■ 4 ■ Up to 2 units 5’ x 10’ x 2-3)/

8” ■ Spring tension & panel end stop 1 All-welded frame; HD support

rollers, midshelf w/movable fingers & full-length small parts support; auto-shifting back grid; TRK dust system; opt.true split-blade scoring.

Striebig Compact Auto Striebig Compact Plus ■ ■ 5-1/44

■ ■ Up to 2 units Up to 2 units 5’ x 10’ x 2-3)/

8” 6’9”x15’ x 2-3/8”

■ Spring tension &Same as above. Same as above. Same as above.

Striebig Compact Plus Auto ■ 5-1/4 ■ Up to 2 units 6’9”x15’ x 2-

3/8” Same as above. Same as above. Striebig OptisawStandard ■ 7.5 ■ Up to 2 units 5’6”x14’x3-

1/8” ■ Spring tension &locking rollers 1 Same +V grooving option.

Striebig Evolution ■ 7.5 ■ Up to 2 units 5’6” or 7” x 14’ or 17-1/4” x 3-1/8”

■ Spring tension &auto locking rollers

1 Same + digital measuring; full wood back grid, auto-locking sawbeam/ roller; push-button plunge/tilt/lock of saw head, opt. shimless scoring, bottompanel edge trimming.

Striebig Control 7.5 ■ 15-20% increase Same ■ Same 1 Same plus auto trave (33-82 fpm); end sensor; cycle selector; start position memory.

Striebig DMS DigitalMeasuring System Above, plus

increased accuracy, reduced waste, higher production, enhanced versat.

Digital measuring system for allStriebig saws. Rapid cut set up to 0.005"/0.1mm, instant inch/metric conversion, LED display.

EPS Programmable Stop NC As above plus

approx. 25% production increase on any model except Compact

Automatic programmable digitalstop for Striebig saws. Rapid cut System setup from keyboard. Stores up to 400 addresses. Retrofittable.

Striebig WSG Angle-Cutting Attachment Allows cutting of

angles 0-46° Rapid mounting and dismounting. Unipoint system simplifies measuring.

Doucet Machineries Inc., 340 6th St., Daveluyville, PQ, Canada G0Z 1C0 (819) 367-2633 www.doucetinc.com RS-75 20-30 or 40 ■ ■ ■ Power

Feed Up to 75 fpm Up to 60” wide Up to 0.75” thick

opt. Rollers 1 Optional feeder/stacker Throughfeed machine.

HRS-120 75 or 100 ■ Power Feed Up to 120 fpm Up to 60” wide

Up to 4” thick opt. Inflated rollers 1 Optional augers 2x30 hp Throughfeed machine.

Edgetech Inc., 11933 12th Ave. S., Burnsville, MN 55337 (952) 881-1925 www.edgetechusa.com CTS730 Countertop Saw ■ ■ 5 ■ Variable Countertops

Bar topssolid surface

Pneumatic clamp Miter cuts, drawbolt cavities, variable speed. Opt. dual laser lightguide. Opt. variable mitre w/digitalreadout. Opt. attached conveyors.

CTS740 (Extended length)Countertop Saw

■ ■ 5 ■ Variable Countertops Bar topssolid surface

Pneumatic clamp Extended length saw for largercutting capacity. Mitre cuts, drawbolt cavities, variable speed. Opt. duallaser light guide, opt. variable mitrew/ digital readout, opt. 5th router.Opt. 20” blade, opt. attached conveyors.

CTR960 Countertop Router ■ 3-1/4Opt. 5

hpHigh Freq. Motor

■ Variable Countertops Bar topssolid surface

Pneumatic clamp Cuts openings in countertops for sinks & rangetops. Makes laminate endcaps & sidesplash blocks. Cuts rectangular openings w/o template.

CTR960-U Undermount sink router

■

3-1/4Opt. 5 hp highfreq. motor

■ Variable Countertops Bar tops Pneumatic clamp Routs groove for undermount sink

installation in laminate countertops. European Woodworking Machinery, PO Box 550, Franklinton NC 27525 (919) 494-5197 www.ewmco.com

ANTHON PORTA ■ 12, 30 ■ ■ ■ CNC Dep. on pattern 4' X 10' up to

8' X 21" Beam & rolls 2 Automatic feeding and racking is possible, side aligners.

ANTHON LN ■ 12, 18 ■ ■ ■ CNC 25 cu. m 4' X 10' up to 7' X 18' ■ Pressure beam &

pneumaticcylinders 1 Patented turn table for head cutting, data transfer from external PC via interface to saw computer, special clamps, sidealigners, various systems of feeding and stacking depend. on requirements, PC-controloptimizing system, waste disposal.

ANTHON PROFIT ■ ■ 12, 18 ■ ■ CNC 60 cu. m 5' X 10' up to 8' X 18'

■ Pressure beam & pneumatic cylinders

2 Same as above.

ANTHON LNB ■ ■ 30 ■ CNC 100 cu. m. 5' X 12' up to 11' X 21' ■ Pressure beam &

pneumatic 1 Same as ANTHON LN.

http://www.csaw.com/�

http://www.doucetinc.com/�

http://www.edgetechusa.com/�

http://www.ewmco.com/�


Product Name/No

Vert

ical

Sl

idin

g Ta

ble

Bea

m

Ang

ular

Motor hp

Man

ual

Sem

iAut

omat

ic

Aut

omat

ic

NC or CNC


Work Piece Size

Scor

ing

Type of Tilt

Type of Hold Down

No.

of O

pera

tors

Special Features

Hyd

raul

ic

Man

ual

Pneu

mat

ic


cylinders ANTHON LNC ■ 37, 42 ■ CNC 150 cu. m. 5' X 12' up to

11' X 21' ■ Pressure beam & pneumatic cylinders

1 Same as ANTHON LN.

ANTHON PVL/PVQ 13 X 5 ■ CNC Dep.onthickness 4' X 10' up to 8' X 16' ■ Pneumatic

cylinders 1 Multiple rip of X-cutting saw for single sheets.

ANTHON CP ■ 2x25 ■ CNC 120mm/book 21’ cut length ■ Pressure beam & clamps Allen Bradley or Siemens

PLC,Visualization, turntable for head cuts feeding systems, stacking systems,postforming saw, optimization, AC-Servo motors for programmablepusher, THK guiding system.

ANTHON POA 25 each ■ CNC 100mm/book 12x100’ width Pressure beam & clamps Allen Bradley or Siemens PLC,

visualization, feeding systems, stackingsystems, optimization, THK guiding system.

ANTHON POB 30 each ■ CNC 150mm/book See above See above See above. ANTHON POC 40 each ■ CNC 200mm/book See above See above See above.

Giben America Inc., 2915 Courtyards Drive, Ste. C, Norcross, GA 30071 (770) 448-9140 www.giben.com Smart ST ■ 15 ■ NC Variable based on

cutting pattern Start 16000mm up to 3300mm L

■ Pne. pressure beam w/Torsion bar

1, 2 Quick change tooling system.

Smart 80 SP ■ 15 ■ PC w/Windows OS

Variable based on cutting pattern CL 3300-

4400mm PS 3350-4300mm

■ Pne. pressure beam w/Torsion bar

1 On board opt. avail. Quick change tooling syst., auto dynamic sid aligner, floating grippers, air flotation tables.

Smart 95 SP High Tech ■ 15-18 ■ PC

w/Windows OS

Variable based on cutting pattern

CL 3300-4400mm PS 3350-4300mm Pne. pressure

beam w/Torsion bar

1 Same as above

Smart 95 SPT High Tech ■ 15-18 ■ PC

w/Windows OS


4400mm TS 3300x1600mm to 4400 x 2200mm

Pne. pressure beam w/Torsion bar

1 Same as above plus auto. material loading from the lift table.

Prisma 3000 SP ■ 18-25 ■ PC w/Windows OS


4500mm PS 3350x4550mm

■ Pne. split pressure beam for full grip location flexibility

1 Sym. saw carriage guidance syst. Quick change tooling, fully auto dyn. side aligner. Floating grippers, airtables, opt grooving & postform cut.

Prisma 3000 SP X-Cut ■ 25 ■ PC

w/Windows OS


4500mm PS 3300x4500mm


1 Sym. saw carriage guidance syst. Quick change tooling, auto dyn. side aligner. PM tech. w/X axis grip. , airtables, opt grooving & postform cut.

Prisma 3000 SP Y-Cut ■ 25 ■ PC

w/Windows OS


4500mm PS 3300x4500mm


1 Same as above. Award-winning PM technology on X & Y axis.

Prisma 3000 SPT ■ 18-25 ■ PC w/Windows OS


4300mm PS 3300x4500mm


1 Same as SP plus Giben gripper infeed, syst., flexible loading solutions.

Prisma 3000 SPT X-Cut ■ 25 ■ PC

w/Windows OS


4500mm TS 3300x1600mm to 4500x2200mm

■ Pne. split pressurebeam for full griplocation flexibility

1 Same as above.

Prisma 3000 SPT Y-Cut ■ 25 ■ PC

w/Windows OS


4500mm TS 3300x1600mm to 4500x2200mm


1 Same as SP version plus grip. infeed syst. Giben lifting grippers, flexible loading solutions.

401 SP 401 SPT ■ ■ 36-48 36-48 ■

■ Same Same as above 3500 to 4500mm Pusher stroke 3350 up to 4550

■ ■ Pneumatic

splitpressure beam forfull gripper flex.

1 Symmetrical saw carriage guide syst. double-sided main arbor support. Auto. dynamic double side aligner.Patented gripper infeed on SPT.

Sigma 3000 ■ 30 ■ PC w/Windows OS


4500mm TS 3300x1600mm to 4500x2200mm


1 Sym. saw carriage guidance syst.,quick change tooling, auto dynamic multiple roller syst, floating grip, pat infeed syst.

Sigma 3000 X-Cut ■ 30 ■ Same Same Same ■ Same 1 Same plus PM tech on the X axis Sigma 3000Y-Cut ■ 30 ■ Same Same Same ■ Same 1 Same plus PM tech on the X & Y

axis Supermatic 17 Supermatic 19 Hypermatic 17 Hypermatic 19

■ ■ ■ ■

48 48 60 60 ■ ■ ■ ■

Same Same as above Per customer requirements ■

■ ■ ■

Pneumatic splitpressure beam forfull gripper flex.

1 Symmetrical saw carriage guide syst. Double-sided main arbor support. Auto. dynamic multiple roller sidealigner, patented gripper infeed syst.

HSC ■ 2 @ 25 ■ Same Same as above Per customer requirements Same as above 1 Same, but with vertical saw

carriage guidance system.

http://www.giben.com/�


Product Name/No

Vert

ical

Sl

idin

g Ta

ble

Bea

m

Ang

ular

Motor hp

Man

ual

Sem

iAut

omat

ic

Aut

omat

ic

NC or CNC


Work Piece Size

Scor

ing

Type of Tilt

Type of Hold Down

No.

of O

pera

tors

Special Features

Hyd

raul

ic

Man

ual

Pneu

mat

ic


Tetramatic ■ 2 @ 30 ■ Same Same as above Per customer requirements Same as above 1 Same as above, but with vertically-

opposed symmetical saw carriageguidance system.

ICON2 105 ICON 2 125 ■

■ 18 25 ■ ■ Same Variable based on

cutting pattern CL rip 4400mm CL cross 15500mm TS 4400x1600mm to 4400 x2200mm

■ ■ Steel

pneumaticpress. beam w/torsion bar mech.

1 A compact angular offering high prod. output in approx. same floor space as conven. rear load mach. Rips & crosscuts w/o need to rotate strips manualy

Hendrick, 36 Commercial St., Salem, MA 01970 (978) 741-3600 www.hendrickmanufacturing.com PRO-V ■ 9/12 hp ■ Med. Prod. 4’,5’,6’,8’ or

10’ ■ Pneumatic 1 Three cutting modes: normal, reciprocating and scoring

HP-3 ■ 9/12 hp ■ CNC High Prod. 4’,5’,6’,8’ or 10’ ■ Pneumatic Same as above.

HPP Vertical bevel ■ 9/12 hp 9/12 hp ■

■ CNC CNC High Prod. 5’,8’, 10’

4’,5’,6’,8’ or 10’

■

■ Pneumatic Pneumatic 1 1 Unique vertical machine w/ jump

scoring Three cutting modes: normal, reciprocatingand scoring

HPS ■ 5/7.5 hp ■ Med. Prod 4’,5’,6’,8’,10’ or 12’ ■ Pneumatic 1 Custom table configurations

CTCS ■ 5/7.5 hp ■ Med. Prod 4’ ■ 1 Post form countertop cutting station US-X ■ 12 hp ■ CNC High Prod. 28” or 50” ■ Pneumatic 1 Crosscut beam saw with

jumpscoring option SRP ■ 16/24 hp ■ CNC High Prod. 8’,10’,12’ ■ Pneumatic 1 Solid back table configurations

forcutting small parts. PC controller w/onboard optimization standard

NRP ■ 16/24 hp ■ CNC Ind. High Prod. 8’,10’,12’ ■ Pneumatic 1 High speed material indexing and sawcarriage traverse. PC controller w/onboard optimization standard

URP ■ 16/24 hp ■ CNC Ind. High Prod. 8’,10’,12’ ■ Pneumatic 1 Wide format beam saw w/ customlengths and up to 8” depth of cut. PC controller w/ onboardoptimization standard

Holz-Her, a division of Weinig, P.O. Box 3158, Mooresville, NC 28117 (704) 799-0100, (800) 666-8533 www.weinigusa.com #1265S ■ 4 hp ■ Custom shop 62” x 125” ■ Mechanical 1 SuperCut scoring. #1255 ■ 5.5 hp ■ Custom shop 74” x 169” ■ Mechanical 1 SuperCut scoring. #1260 ■ 5.5 hp ■ Med. prod. 74” x 169” ■ Mechanical 1 SuperCut scoring. #1270 ■ 4 hp ■ Med. prod. 74” x 169” ■ Mechanical 1 SuperCut scoring. Cut 70 ■ 15 hp ■ CNC Med. prod. up to 12’ x 12’ ■ Pneumatic 1 THK guides, rack & pinion drives. Cut 85 ■ 20 hp ■ CNC High prod. up to 14’ x 14’ ■ Pneumatic 1 Front & rear load. Cut 110 ■ 25 hp ■ CNC Industry-High prod. up to 14’ x 14’ ■ Pneumatic 1 Front & rear load.

Joos USA Inc., 680 Madison Ave., Manalapan, NJ 07726 (732) 786-0490 www.joosusa.com Mayer PS 9 100 ■ 20 ■ CNC Variable ±300

sheets up to 12 ft ■ Beam 1 PC w/ diagnostics & technology database.

Mayer PS 2 120 ■ 28 ■ CNC Variable ±400 sheets up to 14 ft ■ Beam 1 Same as above.



Mayer PS250 ■ ■ up to 100 ■ CNC Variable custom ■ Beam 1 Same as above. Laguna Tools Inc.,17101 Murphy Ave.,Irvine,CA 92614 (800) 234-1976 or (949) 474-1200 www.lagunatools.com

Robland Z3200 ■ 7.5 hp ■ 10' length 3/4 hp ■ Manual 1 Robland Z2500 ■ 7.5 hp ■ 8' length 3/4 hp ■ Manual 1 18” blade diameter, 54” rip. Z3800 ■ 7.5 hp ■ 12’ panels 3/4 hp ■ Manual Same as above Laguna 2700 ■ ■ 4.5 hp ■ 4’ x 9’ panels 1 hp ■ Manual Signature Series ■ ■ 9 hp ■ 5’ x 10’ panels 1 hp ■ Manual C45 ■ ■ 7.5 hp ■ Med. prod. 10-1/2” ■ ■ Mechanical 1 Auto-Star-Delta start NZ3200 ■ ■ 7.5 hp ■ Med. prod. 10-1/2” ■ Mechanical 1 Dust collect., opt. auto tilting blade PRO27 ■ ■ 4.5 hp ■ Med. prod. 9’ ■ ■ Mechanical 1 Entry level

Lobo Machinery Corp., 13731 Proctor Ave., City of Industry, CA 91746 (626) 369-6500 www.lobomachine.com SC-H5 ■ ■ 4 hp ■ 129” x 62” Pressure shoe TSP-3200 ■ ■ 9 hp ■ 10’ x 5’ ■ ■ TSP-10A ■ 10 hp ■ NC Max. 16’x16’

Custom sizes avail.

■ Pressure beam Auto cutting length travel, pneumatic stops.

TSP-10AAT ■ 10 hp ■ NC Max. 16’x16’ ■ Pressure beam Auto program pusher and cutting cycle, cutting length, screen

http://www.hendrickmanufacturing.com/�

http://www.weinigusa.com/�

http://www.joosusa.com/�

http://www.lagunatools.com/�

http://www.lobomachine.com/�


Product Name/No

Vert

ical

Sl

idin

g Ta

ble

Bea

m

Ang

ular

Motor hp

Man

ual

Sem

iAut

omat

ic

Aut

omat

ic

NC or CNC


Work Piece Size

Scor

ing

Type of Tilt

Type of Hold Down

No.

of O

pera

tors

Special Features

Hyd

raul

ic

Man

ual

Pneu

mat

ic


display, PC control, on-line available front or side loading system.

TSP-1030D ■ 15 hp ■ CNC Max. 16’x16’ ■ Pressure beam Same. TSP-330R ■ 25 hp ■ CNC Max. 16’x16’ ■ Pressure beam Same except front or rear loading. TRS 1014 ■ 40 hp ■ Pressure rollers Feed trough, multiple cutting.

Martin Woodworking Machines Corp., 8107-M Arrowridge Blvd., Charlotte, NC 28273 (704) 525-3963 www.martin-usa.com Martin T74 Sliding Table Saw Martin T60 Sliding Table Saw

■ ■ 7.5 ■ ■ ■ ■ 5' x 12' ■ ■ Pneumatic or manual 1 Angular tilting.

Midwest Group One, 2645 26th Ave. S., Minneapolis, MN 55406 (612) 721-5347 www.midwestgroupone.com CS 4330/5840/5347 Cutting Stations ■ ■ 5.0 ■ ■ Variable Countertops,

Solid surface, panels 4 pneumatic

clamps 1 Cuts miters and drawbolts slots. Uses optional laser and variable mitre kit to increase productivity.

Mini Max USA, 2475 Satellite Blvd., Duluth, GA 30096 (770) 813-8818 or (800) 292-1850 www.minimax-usa.com Mini Max SC 3W ■ 4.8 or 6.6 ■ 4' x 8' ■ ■ Eccentric clamp 1 63" Crosscut capacity, 50" rip

capacity, Hardened Steel Guideways, outfeed extension table, Sliding Table Lock.

Mini Max SC4W ■ 4.8 or 9 ■ 4' x 8' ■ ■ Eccentric clamp 1 63" Crosscut capacity, 50" rip capacity, outfeed Extension Table, mitre gauge with fence, telescopic support arm.

Mini Max S315WS ■ 4.8 or 9 ■ 5' x 9' ■ ■ Eccentric clamp 1 109" Crosscut capacity, 50" rip capacity, separate motor scoring, mitre gauge with fence, dial indicator for tilt, cast iron rip support with microadjustment, 2 position table lock, external scoring adjustments.

Mini Max Formula S35 ■ 9 ■ 5' x 10' ■ ■ Eccentric clamp 1 126" crosscut capacity w/sliding

table, Gantry Mounted overarm saw guard, cast iron rip fence support, rip capacity 59", separate motor scoring (1hp), height and tilt adjustment by hand wheels on front of machine.

Mini Max Formula S40 ■ 12 ■ 5' x 10' ■ ■ Eccentric clamp 1 126" crosscut capacity, Gantry

Mounted swinging overarm saw guard, cast iron rip fence support, rip capacity 59", separate mitre gauge with fence, 3-speed main blade, power raise and lower, programmable powered rip fence w/digital readout. Opt. 144" Stroke.

Multiscore Mfg. Co., 15-7157 Honeyman St., Delta, BC Canada V4G 1E2 (604) 946-6130 www.multiscore.com Model 21 System (Rip/Crosscut) ■ 20–60 ■ 2000 panels 5' x 10' Opt. Roller 3 Sawing and/or grooving. Model MR-21 Rip Saw Gang Rip 20–200 ■ 4000 panels 62” width Roller 1 Sawing and/or grooving. MC21 Crosscut Saw 20-200 ■ 4000 panels Up to 122” Roller 1 Sawing and/or grooving.

Paul Saws & Systems, A Div. of Koch Ltd., 300 Lake Ridge DR SE, Smyrna GA 30082 (678) 444-5000 www.paulsaws.com K 34 Rip/Crosscut ■ 20-125

■ ■ 6000 panels Up to 8’ x 10’ Opt.

K 34 Rip/Crosscut 5 hp/saw ■ ■ ■ CNC 6000 panels Up to 8’ x 10’ Opt. Powermatic Corp., WMH Tool Group, 2420 Vantage DR, Elgin IL 51026 (847) 851-1000 www.wmhtoolgroup.com

511 Panel Saw ■ ■ 62” ■ 1 Worm drive motor

HPS 67 ■ 5 ■ 5’ x 10’ ¾ HP ■ Eccentric 1 Ball bearing, hardened steel rodways on cartridge; Dado capacity13/16; 50” rip capacity; separatescoring motor; 4” cutting depth

HPS 126 ■ 7.5 ■ 5’ x 10’ ¾ HP ■ Eccentric 1 54” rip capacity, sep. scoring motor;5” cutting depth over arm guard.

http://www.martin-usa.com/�

http://www.midwestgroupone.com/�

http://www.minimax-usa.com/�

http://www.multiscore.com/�

http://www.paulsaws.com/�

http://www.wmhtoolgroup.com/�


Product Name/No

Vert

ical

Sl

idin

g Ta

ble

Bea

m

Ang

ular

Motor hp

Man

ual

Sem

iAut

omat

ic

Aut

omat

ic

NC or CNC


Work Piece Size

Scor

ing

Type of Tilt

Type of Hold Down

No.

of O

pera

tors

Special Features

Hyd

raul

ic

Man

ual

Pneu

mat

ic


Progressive Systems Inc., 800 McKinley St. NW, Anoka, MN 55303 (800) 841-1392 www.progressivesys.com

PSI RF4-40/3085Panel sizer 10-40 hp

speeddependent

■ ■ 30 ppm on 4 x 8Size dependent 3’-5’ wide 4’-

10’ long 1/8”-1-1/2” thick

■ Indiv. air cushion loaded poly rollsover driven feed

Balanced feed rolls, indiv. air loaded hold-downs & psi precision feed chain square panel sizing @ max. feed rates.

PSI RF/CF Two Pass Cut to Size System 10-40 hp ■ ■ trim split @300-400

Size dependent 3’-12’ wide 6’-35’ long1/8”-6” thick 3’x3’ min output

■ Same & powered vertical adjust on rails & bearings

Same as above plus sound enclosure on trim/hog saws. Scoring saws w/ easy adjust. CNC w/Sony scale saw position reference.

PSI RF 4/6/8 Roll Feed 10-300 hp ■ ■ Size dependent 100-

300 fpm 1/8” - 6” thickness

2’-9’ wide 3’-40’ long1” min rip width1/8”-6” thick

■ Same & air loaded press plate holddown at saw arbor

4, 6, or 8, balanced feed rolls, indiv. & full length air cushion loadedpress rolls for positive straight feeding of panels.

PSI RF 4/6/8 Roll Feed Siding-Groover & Flange Profiler

10-150 hp ■ ■ Grooving quantity dep. 100-300 fpm 2’- 5 wide 6’-

24’ long6”x12” siding 1/4”-3/4” thick

■ Same & air loaded press plate holddown at saw arbor

4, 6, or 8, balanced feed rolls, indiv. & full length air cushion loadedpress rolls for positive straight feeding of panels. PSI high speed spindle.

PSI SB/DC 40/50/60/80Dip Chain 75-150 hp ■ ■ Thickness & saw

dependent30-200 fpm

2’-12’ wide 3’-24’ long3/4” min rip w1/4”-3-1/2” thick

Same & air loaded press plate holddown at saw arbor

Slat bed feed system w/replaceablepolyurethane inserts mounted on PSI feed chains w/air cushion loaded-press rolls.

PSI T/ACC-4/12 Trim & Angular Flying

10-30 hp ■ ■ Size dep. cont. line speed 50-200 fpm

2’-12’ wide cont. input length ■ Staggered air

cush. loaded poly rolls

Trim multi-split, cut to length cont. process panels. CNC adjusted splitting saws

PSI RCC 2/10 Reciprocating Crosscut 10-60 hp ■ ■ Size dep., cont. line

speed 50-600 fpm 2’-10’ wide cont. input length Air actuated hold

down beam Saw reciprocates on rails & bearings, w/oil mist lubrication. Servo motor carriage.

Riebling Machinery, 1511 Rte. 22, Ste. 309, Brewster, NY 10509 (914) 668-4800 www.riebling.com Shark ■ 9 hp ■ 5’ x 10’ ■ ■ Pneumatic 1 3 & 4 axis control, electric tilt

&height of blade. KS320P ■ 9 hp ■ 5’ x 10’ ■ ■ Pneumatic 1

SCM Group North America Inc., 2475 Satellite Blvd., Duluth, GA 30096 (770) 813-8818 www.scmgroup-usa.com Sigma Prima N ■ 12 hp ■ CNC 10.5 x 12.5 ■ Pressure beam 1 Magnetic pusher measurement,

airflotation tables, automatic side align.,desktop PC, quick blade change

Sigma Impact 85K ■ 18 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 High speed servo driven rack & pinioncarriage/pusher. PC/Windows interfacewith onboard optimizer, automatic sidealigners, quick blade change

Sigma Impact 107C/D ■ 18/24 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 Same as above. Gabbiani Galaxy 125L ■ 24 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 Same as above w/ prismatic

guidewaysin carriage Gabbiani Galaxy 125HS ■ 30 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 High speed carriage w/ prismatic

guideways, auto scoring, grooving, optimized beam w/ automatic side aligners

Gabbiani Galaxy 125T HS ■ 30 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 Same as above plus rear lift w/

lead screwspowered rollers, optional tri-lateral loading, thin panel loading, turntable

Gabbiani Galaxy T3 130 ■ 30 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 Servo controlled blade height, auto

scoring& grooving, easily removed base panels, motorized side aligners, prismatic guidesin carriage/pusher

Gabbiani Galaxy 140/140T ■ 30 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 High speed carriage w/

prismatic.guideways, auto scoring, grooving,optimized beam w/ automatic side aligners

Gabbiani Axioma 105/125 ■ 24/30 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 Same as above. Gabbiani Ocean 160 ■ 50 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 Same as above.

Safety Speed Manufacturing, 13943 Lincoln St. N.E., Ham Lake, MN 55304 (763) 755-1600 www.safetyspeed.com Model C4 ■ 3-1/4 hp ■ W: 50" L: 96”

1.75" thick ■ Spring arm 1 Zinc plated guide tubes, plastic rollers, spring loaded syst, vert & horiz.

Model C5 ■ 3-1/4 hp ■ W: 64" L: 96” 1.75" thick ■ Spring arm 1 Zinc plated guide tubes, plastic

rollers, spring loaded syst, vert & horiz.

Model H4 ■ 3-1/4 hp ■ W: 50" L: Unlim. 1.75" thick

■ Spring arm 1 Same as above

Model H5 ■ 3-1/4 hp ■ W: 64" L: ■ Spring arm 1 Same as above

http://www.progressivesys.com/�

http://www.riebling.com/�

http://www.scmgroup-usa.com/�

http://www.safetyspeed.com/�


Product Name/No

Vert

ical

Sl

idin

g Ta

ble

Bea

m

Ang

ular

Motor hp

Man

ual

Sem

iAut

omat

ic

Aut

omat

ic

NC or CNC


Work Piece Size

Scor

ing

Type of Tilt

Type of Hold Down

No.

of O

pera

tors

Special Features

Hyd

raul

ic

Man

ual

Pneu

mat

ic


Unlim. 1.75" thick

Model H6 ■ 3-1/4 hp ■ W: 76" L: Unlim. 1.75" thick ■ Spring arm 1 Same as above

Model 6400 ■ 3 hp, worm drive ■ W: 64" L:

Unlim. 1.75" thick

■ Spring arm 1 Chrom plated tube guides, alum rollers, counterweight vert. & horiz. rulers

Model 6800 ■ 3 hp, worm drive ■ W: 74" L:

Unlim. 1.75" thick

■ Spring arm 1 Same as above

Model 7400 ■ 2 or 3 hp induction ■ W: 64" L:

Unlim. 2.125" thick

■ ■ Floating pressuresaw foot

1 Dual V-track guide syst., alum rollers, counterweight syst, midway fence, vert& horiz rulers

Model 7400XL ■ 2 or 3 hp induction ■ W: 64" L:

Unlim. 2.125" thick


1 Same as above

Model ES52 ■ 5 hp or 7 hp induction ■ W: 61” L:

Unlim. 2.25” thick


1 European style traveling carriage. Opt. scoring syst., adjust grid, midway fence,vert & horiz rulers w/stops

SR-5 Panel saw/router ■ 3-1/4 hp ■ W: 62" L:

Unlim 1.75" thick

■ Spring arm 1 Counterweight syst., vert. & horiz. rulers, midway fence w/stop, adj. floating router head

SR-5U Panel saw/router ■ 3 hp worm

drive ■ W: 62" L: Unlim 1.75" thick

■ Spring arm 1 Counterweight syst., vert. & horiz. rulers, midway fence w/stop, adj. floating router head

SawTrax Mfg. Inc., 3694 Kennesaw S. Ind. Drive, Ste. A, Kennesaw, GA 30144 (770) 974-0021 www.sawtrax.com C52VP ■ 3 1 hp ■ 65"x42"x78" optional

add on ■ Spring arm

Optional Sheet Clamp

1 Varsity and 1000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Saw Motor Bracket, 15 amp Porter Cable saw on a spinning insert and a 24 tooth carbide saw blade

C64VP ■ 3 1 hp ■ 65"x42"x90 Optional add on

■ Spring arm Optional Sheet Clamp


1052 ■ 3 1 hp ■ 122"x42"x78" Optional add on

■ Spring Arm Optional Sheet Clamp


1064 ■ 3 1 hp ■ 122"42"90" Optional add on



1076 ■ 3 1 hp ■ 122"x42"x102"

Optional add on



1088 ■ 3 1 hp ■ 122"x42"x114"

Optional add on



10100 ■ 3 1 hp ■ 122"42"126" Optional add on


1 Varsity and 1000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop,

http://www.sawtrax.com/�


Product Name/No

Vert

ical

Sl

idin

g Ta

ble

Bea

m

Ang

ular

Motor hp

Man

ual

Sem

iAut

omat

ic

Aut

omat

ic

NC or CNC


Work Piece Size

Scor

ing

Type of Tilt

Type of Hold Down

No.

of O

pera

tors

Special Features

Hyd

raul

ic

Man

ual

Pneu

mat

ic


Bar & Measuring Tapes, Dual Rip Gauge, Saw Motor Bracket, 15 amp Porter Cable saw on a spinning insert and a 24 tooth carbide saw blade

2052 ■ 3 1/4 worm drive

■ 122"x42"x78" Optional add on


1 2000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Spinning Saw Insert, 15 amp Worm Drive Saw with toggle power switch, Dust Hood, Dust Collection Upgrade, Steel Sleeved Material Rollers , 24 tooth Carbide saw blade

2064 ■ 3 1/4 worm drive




2076 ■ 3 1/4 worm drive

■ 122"x42"x102"

Optional add on

Spring arm Optional Sheet Clamp


3050 ■ Milwaukee 10" Blade

■ 122"x42"78" Optional add on


1 3000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Spinning Saw Insert, 15 amp Milwaukee 10" Saw, Dust Hood, Dust Collection Upgrade, Steel Sleeved Material Rollers and a general purpose blade






■ 122"x42"x102"

Optional add on



C52SM ■ 3 1 ■ 65"x42"x78" Optional add on


1 Sign Maker's Pkg - Standard Equipment, Dust Hood, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Spring Hold Down, OLFA Knife Cutter Insert, Dual Rip Gauge, Makita 7 1/4 inch saw on a spinning saw insert plate and a 24 tooth Carbide saw blade

C64SM ■ 3 1 ■ 65"x42"x90" Optional add on



FS52SM ■ 3 1 ■ 122"x42"x78" Optional add on

■ Spring arm Optional Sheet

1 Sign Maker's Pkg - Standard Equipment, Dust Hood, Dust


Product Name/No

Vert

ical

Sl

idin

g Ta

ble

Bea

m

Ang

ular

Motor hp

Man

ual

Sem

iAut

omat

ic

Aut

omat

ic

NC or CNC


Work Piece Size

Scor

ing

Type of Tilt

Type of Hold Down

No.

of O

pera

tors

Special Features

Hyd

raul

ic

Man

ual

Pneu

mat

ic


Clamp Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Spring Hold Down, OLFA Knife Cutter Insert, Dual Rip Gauge, Makita 7 1/4 inch saw on a spinning saw insert plate and a 24 tooth Carbide saw blade

FS64SM ■ 3 1 ■ 122"x42"x90" Optional add on



FS76SM ■ 3.1 ■ 122"x42"x102"

Optional add on



FS88SM ■ 3 1 ■ 122"x42"x114"

Optional add on


Sign Maker's Pkg - Standard Equipment, Dust Hood, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Spring Hold Down, OLFA Knife Cutter Insert, Dual Rip Gauge, Makita 7 1/4 inch saw on a spinning saw insert plate and a 24 tooth Carbide saw blade

FS100SM ■ 3.1 ■ 122"x42"x126

Optional add on


1

Schelling America Inc., P.O. Box 80367, Raleigh, NC 27623 (919) 544-0430 www.schelling.com fh 4330 Auto ■ 21 hp ■ CNC 10’ ■ Pressure Beam 1 3.3” blade exposure, Evolution

tech.Sep. pushoff carriage & feeder unitfor reduced cycle time. Max. saw travel speed 380ft/min. Open platform-Windows XP operatingsystem. DUPLUS option (two feedersfor crosscutting)

fh 4330 Manual ■ 21 hp ■ CNC 10’ ■ Pressure Beam 1 3.3” blade exposure, Evolution tech.Max. saw travel speed 380ft/min.Open platform-Windows XPoperating system. DUPLUS option(two feeders for crosscutting)

fh 4430 Auto ■ 21 hp ■ CNC 12’ (14’) ■ Pressure Beam 1 3.3” blade exposure, Evolution tech.Sep. pushoff carriage & feeder unitfor reduced cycle time. Max. sawtravel speed 380ft/min. Openplatform-Windows XP operatingsystem. DUPLUS option (two feedersfor crosscutting

fh 4430 Manual ■ 21 hp ■ CNC 12’ (14’) ■ Pressure Beam 1 3.3” blade exposure, Evolution tech.Max. saw travel speed 380ft/min.Open platform-Windows XPoperating system. DUPLUS option(two feeders for crosscutting)

fh 6330 Auto ■ 37 hp ■ CNC 10’ ■ Pressure Beam 1 5.3” blade exposure, Evolution tech.Sep. pushoff carriage & feeder unitfor reduced cycle time. Max. saw travel speed 500ft/min. Openplatform-Windows XP operating system.

fh 6330 Manual ■ 37 hp ■ CNC 10’ ■ Pressure Beam 1 5.3” blade exposure, Evolution tech. Max. saw travel speed 500ft/min.Open platform-Windows XPoperating system.

fh 6430 Auto ■ 37 hp ■ CNC 12’ (14’) ■ Pressure Beam 1 5.3” blade exposure, Evolution tech.Sep. pushoff carriage & feeder unitfor reduced cycle time. Max. sawtravel speed 500ft/min. Openplatform-Windows XP operating system.

fh 6430 Manual ■ 37 hp ■ CNC 12’ (14’) ■ Pressure Beam 1 5.3” blade exposure, Evolution tech.Max. saw travel speed 500ft/min.Open platform-Windows

http://www.schelling.com/�


Product Name/No

Vert

ical

Sl

idin

g Ta

ble

Bea

m

Ang

ular

Motor hp

Man

ual

Sem

iAut

omat

ic

Aut

omat

ic

NC or CNC


Work Piece Size

Scor

ing

Type of Tilt

Type of Hold Down

No.

of O

pera

tors

Special Features

Hyd

raul

ic

Man

ual

Pneu

mat

ic


XPoperating system. fh 6580 Auto ■ 37 hp ■ ■ CNC 19’ ■ Pressure Beam 1 5.3” blade exposure, Evolution

tech.Sep. pushoff carriage & feeder unitfor reduced cycle time. Max. sawtravel speed 500ft/min. Openplatform-Windows XP operating system.

fh 6580 Manual ■ 37 hp ■ CNC 19’ ■ Pressure Beam 1 5.3” blade exposure, Evolution tech.Max. saw travel speed 500ft/min.Open platform-Windows XPoperating system.

fh 8330 Auto ■ 45 hp ■ CNC 10’ ■ Pressure Beam 1 6.5” blade exposure, Evolution tech,Sep. pushoff carriage & feeder unitfor reduced cycle time. Max. sawtravel speed 500ft/min. Openplatform-Windows XP operating system.

fh 8330 Manual ■ 45 hp ■ CNC 10’ ■ Pressure Beam 1 Same but w/o pushoff carriage &feeder unit

fh 8430 Auto ■ 45 hp ■ CNC 12’ (14’) ■ Pressure Beam 1 Same as 8330 Auto. fh 8430 Manual ■ 45 hp ■ CNC 12’ (14’) ■ Pressure Beam 1 Same as 8330 Manual. fh 8580 Auto ■ 45 hp ■ CNC 19’ ■ Pressure Beam 1 Same as 8330 Auto. fh 8580 Manual ■ 45 hp ■ CNC 19’ ■ Pressure Beam 1 Same as 8330 Manual. ah 6 ■ 37 hp ■ CNC 10’, 12’, 19’, > ■ Pressure Beam 1 Custom specific configs possible. ATH ■ 85 (100

opt) ■ CNC 10’, 12’, 19’, > ■ Pressure Beam 1 Custom specific configs possible. ASH ■ 100 hp ■ CNC 10’, 12’, 19’, > ■ Pressure Beam 1 Custom specific configs possible. Silver Machine Inc., 160 W. Beaver Creek Road, Unit 3, Richmond Hill, ON L4B 1B4 Canada (888) 354-3388

www.silvermachineinc.com SF-45 ■ 7.5 ■ 118”w x 4”

thick ■ 1 Motorized blade height.

SF-45A ■ 7.5 ■ 126”w x 4” thick

■ 1 Motorized blade height.

SMP-330 ■ 20 ■ 10’ ■ Pressure Beam 1 120” crosscut capacity

SMJ-3200A ■ 45˚ 7.5 hp ■ 10’ ■ 1 Round steel rail, 2 saw speeds, Tilting blade, power elevation for saw blade

SMJ-2500A ■ 45˚ 5 hp ■ 8’ ■ 1 Same as above.

SBS-120 ■ 18 hp ■ CNC 128” ■ Pressure beam 1 High speed up to 100m/min programmable saw blade projection

Stiles Machinery Inc., 3901/3965 44th St. SE, Grand Rapids, MI 49512 (616) 698-7500 www.stilesmachinery.com Holzma HPP 230 ■ 10 x CNC 125+ 5’ x 12’ ■ Pressure beam 1 PC-based CADmatic control, rack

& pinion driven saw carriage, auto length & speed, touch free magnetic measuring system, ability to add online label printing.

Holzma HPP 250

■

12

■ CNC 175+ 5’ x 12’ ■

Pressure beam 1

PC-based CADmatic control, rack & pinion driven saw carriage, auto cut height, length, & speed, touch free magnetic measuring system, ability to add online label printing.

Holzma HPP 350

■

18

■ CNC 250+ panels 5’ x 12’ ■

Pressure beam 1

PC-based CADmatic control, rack & pinion driven saw carriage, auto cut height, length, & speed, touch free magnetic measuring system, ability to add online label printing, exceptionally high op. speeds, and wide range specialty cutting capabilities.

Holzma HPP 380 ■ 28 ■ CNC 300+ panels 5' x 12' ■ Pressure beam 1 PC-based CADmatic control, rack & pinion driven saw carriage, auto cut height, length, & speed, touch free magnetic measuring system, ability to add online label printing, exceptionally high op. speeds, and wide range specialty cutting capabilities.

Holzma HPL 11 Optimat

■ 28 ■ CNC 400+ panels 5’ x 12’ ■ Pressure beam 1 Same as above.

Holzma HPL 410

■

28 ■ CNC 400+ panels 5’ x 12’ ■ Pressure beam 1 Automatic infeed, thin panel infeed devices standard. PC-based CADmatic control, rack & pinion driven saw carriage, auto cut height, length, & speed, touch free magnetic measuring system, ability to add online label printing,

http://www.silvermachineinc.com/�

http://www.stilesmachinery.com/�


Product Name/No

Vert

ical

Sl

idin

g Ta

ble

Bea

m

Ang

ular

Motor hp

Man

ual

Sem

iAut

omat

ic

Aut

omat

ic

NC or CNC


Work Piece Size

Scor

ing

Type of Tilt

Type of Hold Down

No.

of O

pera

tors

Special Features

Hyd

raul

ic

Man

ual

Pneu

mat

ic


exceptionally high op. speeds, and wide range specialty cutting capabilities.

Holzma HPL 530

■

40

■

CNC 500+ panels 5' x 12'

■

Pressure beam 1 Automatic infeed, thin panel infeed devices standard. PC-based CADmatic control, rack & pinion driven saw carriage, auto cut height, length, & speed, touch free magnetic measuring system, ability to add online label printing, exceptionally high op. speeds, and wide range specialty cutting capabilities.

Holzma HPL 570 ■ 58 ■ CNC 750+ panels 5' x 12' ■ Pressure beam 1 Automatic infeed, thin panel infeed devices standard. PC-based CADmatic control, rack & pinion driven saw carriage, auto cut height, length, & speed, touch free magnetic measuring system, ability to add online label printing, exceptionally high op. speeds, and wide range specialty cutting capabilities.

Stiles Shop Solutions, 3965 44th St. S.E., Grand Rapids, MI 49512 (616) 698-8456 www.stilesshopsolutions.com Altendorf WA 6 ■ 4 ■ 8’ x 10’ up to

3” thick ■ ■ 1 Shimless scoring Altendorf WA 8M ■ 7.5 ■ 10’ x 10’ up to

5” thick ■ ■ 1 Same as above WA 8 ■ 7.5 ■ 10’ x 10’ - Up

to 3” thick ■ Pneumatic Avail. 1 Motorized blade height & tilt. Digital readout for the tilt angle & RAPIDO(shimless) scoring.

Altendorf WA 80 ■ 7.5 ■ 10’ x 10’ - Up to 5” thick ■ Pneumatic Avail. 1 Eye-level control, motorized tilt,

shimless scoring F-45 Standard ■ 7.5 - 10 ■ 10' x 10' - Up

to 5.8125” thick

■ Pneumatic Avail. 1 RAPIDO scoring, motorized blade tilt & height, w/ digital readouts.

F-45 Challenger ■ 7.5 - 10 ■ 10' x 10' - Up to 5.8125" thick

■ Pneumatic Avail. 1 Motorized rip fence, blade height & tilt, RAPIDO scoring, digital readouts.

F-45 Select ■ 7.5 - 10 ■ 10' x 10' - Up to 5.8125" thick

■ Pneumatic Avail 1 Motorized rip fence, motorized blade height & tilt, RAPIDO (shimless)scoring, digital readouts.

F-45 Elmo 3 ■ 7.5 - 10 ■ NC 10' x 10' - Up to 5.8125" Thick

■ Pneumatic Avail 1 Motorized rip fence, motorized blade height & tilt, RAPIDO (shimless)scoring, dig. readouts, motorized adj.

F-45 Elmo 4 ■ 7.5 - 10 ■ NC 10' x 10' - Up to 5.8125" Thick

■ Pneumatic Avail 1 Motorized rip fence, motorized crosscut fence, motorized height & tilt, RAPIDOscoring, dig. readouts, motorized adj.

Holzma HPP 230 ■ 10 x CNC 125+ 5’ x 12’ ■ Pneumatic pressure beam PC-based CADmatic control,

cut/groove capability, rack & pinion driven saw-carriage, auto cut height, length & speed,touch free magnetic measuring system,ability to add online label printing.

Holzma HPP 250 ■ 12.5 ■ CNC 200+ 5’ x 12’ ■ Same as above Same as above Tech Mark Inc., 7901 Industry Drive, North Little Rock, AR 72117 (800) 787-6747 www.tech-mark.com Rojek PK 300A ■ 3.6 or 6.0

hp ■ 10’ length ■ ■ Eccentric Clamp 1 118” crosscut capacity, 59” rip capacity. Dado capability.

Rojek PF 300L ■ 6.5 or 9.0 hp ■ 10.5’ length ■ ■ Eccentric Clamp 1 126” crosscut capacity, 59” rip cap.

Dado capability, sep. scoring motor.

Rojek PF 400S ■ 9.0 or 12.0 hp ■ 10.5’ length ■ Ele ctric Eccentric Clamp 1 Same as above, plus 16” blade

dia. electric tilt & height adjustment.

http://www.stilesshopsolutions.com/�

http://www.tech-mark.com/�

Documents

PANEL PROCESSING - Woodworking Network · 2017. 1. 27. · Colonial Saw Co. Inc., 122 Pembroke St., P.O. Box A, Kingston, MA 02364 (781) 5854364 - . Striebig Compact 4 Up to 2 units