Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
PANELES SOLARES
Yingli Green EnergyYingli Green Energy Holding Company Limited, known as “Yingli Solar”, is one of the world’s leading solar panel manufacturers with the mission to provide affordable green energy for all. Yingli Solar makes solar power possible for communities everywhere by using our global manufacturing and logistics expertise to address unique local challenges.
Higher DurabilityThe multi-busbar design can decrease the risk of the cell micro- cracks and fingers broken.
High Power DensityHigh conversion efficiency and more power output per square meter, by lower series resistance and improved light harvesting.
PID ResistantTested in accordance to the standard IEC 62804, our PV modules have demonstrated resistance against PID (Potential Induced Degradation), which translates to security for your investment.
Advanced GlassOur high-transmission glass features a unique anti-reflective coating that directs more light on the solar cells, resulting in a higher energy yield.
IMPROVED POWER NEVER SETTLE FOR LESS
19.6%CELL EFFICIENCY
10 YEARPRODUCT WARRANTY
0 - 5 WPOWER TOLERANCE
25 Years Linear Warranty
YGE60 CELL SERIES 2
Y I N G L I S O L A R .CO M
PID-FREE
File name: Corporate Logo with Tagline / Vertical.ai
Power Your Life
Yingli’s Linear Performance Warranty
25
Years
201510510%
97%
91%
80%
Industry Standard Warranty
Yingli’s Linear Performance Warranty
25Years
201510510%
98%
92%
82%
Industry Standard Warranty
N-Type Mono Poly
Independently tested for proven product quality and long-term reliability. Millions of PV systems installed worldwide demonstrate Yingli’s industry leadership.
G E N E R A L C H A R A C T E R I S T I C SDimensions (L / W / H) 1650mm / 992mm / 35mm
Weight 18.5kg
YGE 60 CELL SERIES 2
Warning:Read the Installation and User Manual in its entirety before handling, installing, and operating Yingli Solar modules.
Yingli Partners:
Yingli Green Energy Holding Co., [email protected] Tel: +86-312-2188055
© Yingli Green Energy Holding Co., Ltd.
Y I N G L I S O L A R .CO M
STC: 1000W/m2 irradiance, 25°C cell temperature, AM1.5g spectrum according to EN 60904-3.Average relative efficiency reduction of 3.3% at 200W/m2 according to EN 60904-1.
NOCT: open-circuit module operation temperature at 800W/m2 irradiance, 20°C ambient temperature, 1m/s wind speed.
O P E R AT I N G C O N D I T I O N SMax. system voltage 1000VDC/1500VDC
Max. series fuse rating* 15A
Operating temperature range -40°C to 85°C
Max. static load, front (e.g., snow) 5400Pa
Max. static load, back (e.g., wind) 2400Pa
Max. hailstone impact (diameter / velocity) 25mm / 23m/s *DO NOT connect Fuse in Combiner Box with two or more strings in parallel connection
PA C K A G I N G S P E C I F I C AT I O N SNumber of modules per pallet 30
Number of pallets per 40' container 28
Packaging box dimensions (L / W / H) 1705mm / 1135mm / 1140mm
Box weight 588kg
• Due to continuous innovation, research and product improvement, the specifications in this product information sheet are subject to change
without prior notice. The specifications may deviate slightly and are not guaranteed.
• The data do not refer to a single module and they are not part of the offer, they only serve for comparison to different module types.
T H E R M A L C H A R A C T E R I S T I C SNominal operating cell temperature NOCT °C 45 +/- 2
Temperature coefficient of Pmax γ %/°C -0.39
Temperature coefficient of Voc βVoc %/°C -0.30
Temperature coefficient of IscαIsc %/°C 0.05
C O N S T R U C T I O N M AT E R I A L SFront cover (material / thickness) low-iron tempered glass / 3.2mm
Cell (quantity / material / number of busbars) 60 / multicrystalline silicon /12 or 5
Frame (material ) anodized aluminum alloy
Junction box (protection degree) ≥ IP67
Cable (length / cross-sectional area) 1000mm / 4mm2
DS_YGE60CELL SERIES 2 -29b_35mm_EU_EN_20190411_V04
Unit: mm
Q U A L I F I C AT I O N S & C E R T I F I C AT E SIEC 61215, IEC 61730, CE, ISO 9001:2015, ISO 14001:2015, BS OHSAS 18001:2007, SA 8000
Electrical parameters at Nominal Operating Cell Temperature (NOCT)Power output Pmax W 217.6 213.9 210.2 206.5 202.8 199.2
Voltage at Pmax Vmpp V 29.5 29.2 29.0 28.8 28.6 28.4
Current at Pmax Impp A 7.38 7.32 7.24 7.16 7.10 7.02
Open-circuit voltage Voc V 35.8 35.7 35.5 35.4 35.2 35.1
Short-circuit current Isc A 7.87 7.80 7.72 7.64 7.56 7.48
E L E C T R I C A L P E R F O R M A N C EElectrical parameters at Standard Test Conditions (STC)
Module type YLXXXP-29b (XXX=Pmax)YLXXXP-29b 1500V (XXX=Pmax)
Power output Pmax W 295 290 285 280 275 270
Power output tolerances Pmax W 0/+5
Module efficiency ηm % 18.0 17.7 17.4 17.1 16.8 16.5
Voltage at Pmax Vmpp V 32.0 31.7 31.5 31.3 31.0 30.8
Current at Pmax Impp A 9.22 9.15 9.05 8.95 8.88 8.77
Open-circuit voltage Voc V 38.5 38.4 38.2 38.0 37.8 37.7
Short-circuit current Isc A 9.74 9.65 9.55 9.45 9.36 9.26
Higher DurabilityThe multi-busbar design can decrease the risk of the cell micro- cracks and fingers broken.
High Power DensityHigh conversion efficiency and more power output per square meter, by lower series resistance and improved light harvesting.
PID ResistantTested in accordance to the standard IEC 62804, our PV modules have demonstrated resistance against PID (Potential Induced Degradation), which translates to security for your investment.
Advanced GlassOur high-transmission glass features a unique anti-reflective coating that directs more light on the solar cells, resulting in a higher energy yield.
Independently tested for proven product quality and long-term
reliability. Millions of PV systems installed worldwide demonstrate
Yingli’s industry leadership.
IMPROVED POWER NEVER SETTLE FOR LESS
19.6%CELL EFFICIENCY
10 YEARPRODUCT WARRANTY
0 - 5 WPOWER TOLERANCE
25 Years Linear Warranty
YGE72 CELL SERIES 2
Y I N G L I S O L A R .CO M
PID-FREE
File name: Corporate Logo with Tagline / Vertical.ai
Power Your Life
Yingli Green EnergyYingli Green Energy Holding Company Limited, known as “Yingli Solar,” is one of the world’s leading solar panel manufacturers with the mission to provide affordable green energy for all. Yingli Solar makes solar power possible for communities everywhere by using our global manufacturing and logistics expertise to address unique local challenges.
Yingli’s Linear Performance Warranty
25
Years
201510510%
97.5%
91.2%
80.7%
Industry Standard Warranty
Yingli’s Linear Performance Warranty
25Years
201510510%
98%
92%
82%
Industry Standard Warranty
N-Type Mono Poly
G E N E R A L C H A R A C T E R I S T I C SDimensions (L / W / H) 1960mm / 992mm / 40mm
Weight 22kg
YGE 72 CELL SERIES 2
Warning:Read the Installation and User Manual in its entirety before handling, installing, and operating Yingli Solar modules.
Yingli Partners:
Yingli Green Energy Holding Co., [email protected] Tel: +86-312-2188055
© Yingli Green Energy Holding Co., Ltd.
Y I N G L I S O L A R .CO M
STC: 1000W/m2 irradiance, 25°C cell temperature, AM1.5g spectrum according to EN 60904-3.Average relative efficiency reduction of 3.3% at 200W/m2 according to EN 60904-1.
NOCT: open-circuit module operation temperature at 800W/m2 irradiance, 20°C ambient temperature, 1m/s wind speed.
O P E R AT I N G C O N D I T I O N SMax. system voltage 1000VDC/1500VDC
Max. series fuse rating * 15A
Operating temperature range -40°C to 85°C
Max. static load, front (e.g., snow) 5400Pa
Max. static load, back (e.g., wind) 2400Pa
Max. hailstone impact (diameter / velocity) 25mm / 23m/s *DO NOT connect Fuse in Combiner Box with two or more strings in parallel connection
PA C K A G I N G S P E C I F I C AT I O N SNumber of modules per pallet 27
Number of pallets per 40' container 24
Packaging box dimensions (L / W / H) 2000mm / 1140mm / 1145mm
Box weight 640kg
• Due to continuous innovation, research and product improvement, the specifications in this product information sheet are subject to
change without prior notice. The specifications may deviate slightly and are not guaranteed.
• The data do not refer to a single module and they are not part of the offer, they only serve for comparison to different module types.
T H E R M A L C H A R A C T E R I S T I C SNominal operating cell temperature NOCT °C 45 +/- 2
Temperature coefficient of Pmax γ %/°C -0.39
Temperature coefficient of Voc βVoc %/°C -0.30
Temperature coefficient of IscαIsc %/°C 0.05
C O N S T R U C T I O N M AT E R I A L SFront cover (material / thickness) low-iron tempered glass / 3.2mm
Cell (quantity / material / number of busbars) 72 / multicrystalline silicon / 12 or 5
Frame (material ) anodized aluminium alloy
Junction box (protection degree) ≥ IP67
Cable (length / cross-sectional area) 1100mm / 4mm2
DS_YGE72CELL SERIES 2 -35b_40mm_EU_EN_20190428 V04
Unit: mm
Q U A L I F I C AT I O N S & C E R T I F I C AT E SIEC 61215, IEC 61730, CE, ISO 9001:2015, ISO 14001:2015, BS OHSAS 18001:2007, SA 8000
Electrical parameters at Nominal Operating Cell Temperature (NOCT)Power output Pmax W 254.5 250.8 247.1 243.4 239.7 236.0
Voltage at Pmax Vmpp V 35.5 35.1 34.7 34.4 34.0 33.6
Current at Pmax Impp A 7.18 7.14 7.11 7.08 7.06 7.02
Open-circuit voltage Voc V 42.9 42.7 42.5 42.4 42.2 42.1
Short-circuit current Isc A 7.64 7.60 7.57 7.54 7.51 7.47
E L E C T R I C A L P E R F O R M A N C EElectrical parameters at Standard Test Conditions (STC)
Module type YLxxxP-35b (xxx=Pmax)YLxxxP-35b 1500V (xxx=Pmax)
Power output Pmax W 345 340 335 330 325 320
Power output tolerances Pmax W 0/+5
Module efficiency ηm % 17.7 17.5 17.2 17.0 16.7 16.5
Voltage at Pmax Vmpp V 38.5 38.1 37.7 37.3 36.9 36.5
Current at Pmax Impp A 8.97 8.93 8.89 8.85 8.82 8.78
Open-circuit voltage Voc V 46.1 45.9 45.7 45.6 45.4 45.2
Short-circuit current Isc A 9.45 9.41 9.37 9.33 9.29 9.25
File name: Corporate Logo with Tagline / Vertical.ai
Yingli Green EnergyYingli Green Energy Holding Company Limited (NYSE: YGE), known as “Yingli Solar”, is one of the world’s leading solar panel manufacturers with the mission to provide affordable green energy for all. Yingli Solar makes solar power possible for communities everywhere by using our global manufacturing and logistics expertise to address unique local challenges.
Higher DurabilityThe multi-busbar design can decrease the risk of the cell micro- cracks and fingers broken.
High Power DensityHigh conversion efficiency and more power output per square meter, by lower series resistance and improved light harvesting.
PID ResistantTested in accordance to the standard IEC 62804, our PV modules have demonstrated resistance against PID (Potential Induced Degradation), which translates to security for your investment.
Advanced GlassOur high-transmission glass features a unique anti-reflective coating that directs more light on the solar cells, resulting in a higher energy yield.
Choosing the best P-type monocrystalline cells, YLM series modules are making the best out of your system. Trust in the expertise of Yingli and well proven technology.
IMPROVED POWER NEVER SETTLE FOR LESS
21.6%CELL EFFICIENCY
10 YEARPRODUCT WARRANTY
0 - 5 WPOWER TOLERANCE
25 Years Linear Warranty
YLM 60 CELL
File name: Corporate Logo with Tagline / Vertical.ai
Power Your Life
Yingli’s Linear Performance Warranty
25
Years
201510510%
97%
91%
80%
Industry Standard Warranty
Yingli’s Linear Performance Warranty
25Years
201510510%
98%
92%
82%
Industry Standard Warranty
N-Type Mono Poly
Y I N G L I S O L A R .CO M
DURABLE
PID-FREE
G E N E R A L C H A R A C T E R I S T I C SDimensions (L / W / H) 1650mm / 992mm / 35mm
Weight 18.5kg
YLM 60 CELL
Warning:Read the Installation and User Manual in its entirety before handling, installing and operating Yingli Solar modules.
Yingli Partners:
Yingli Green Energy Holding Co., [email protected] Tel: +86-312-2188055
© Yingli Green Energy Holding Co., Ltd.
Y I N G L I S O L A R .CO M
STC: 1000W/m2 irradiance, 25°C cell temperature, AM1.5g spectrum according to EN 60904-3.Average relative efficiency reduction of 3.0% at 200W/m2 according to EN 60904-1.
NOCT: open-circuit module operation temperature at 800W/m2 irradiance, 20°C ambient temperature, 1m/s wind speed.
O P E R AT I N G C O N D I T I O N SMax. system voltage 1000VDC/1500VDC
Max. series fuse rating * 15A
Operating temperature range -40°C to 85°C
Max. static load, front (e.g., snow) 5400Pa
Max. static load, back (e.g., wind) 2400Pa
Max. hailstone impact (diameter / velocity) 25mm / 23m/s *DO NOT connect Fuse in Combiner Box with two or more strings in parallel connection
PA C K A G I N G S P E C I F I C AT I O N SNumber of modules per pallet 30
Number of pallets per 40' container 28
Packaging box dimensions (L / W / H) 1700mm / 1135mm / 1165mm
Box weight 588kg
• Due to continuous innovation, research and product improvement, the specifications in this product information sheet are subject to change without
prior notice. The specifications may deviate slightly and are not guaranteed.
• The data do not refer to a single module and they are not part of the offer, they only serve for comparison to different module types.
File name: Corporate Logo with Tagline / Vertical.ai
Power Your Life
T H E R M A L C H A R A C T E R I S T I C SNominal operating cell temperature NOCT °C 45 +/- 2
Temperature coefficient of Pmax γ %/°C -0.39
Temperature coefficient of Voc βVoc %/°C -0.30
Temperature coefficient of IscαIsc %/°C 0.06
Electrical parameters at Nominal Operating Cell Temperature (NOCT)
Power output Pmax W 236.0 232.3 228.7 225.0 213.9 210.2
Voltage at Pmax Vmpp V 30.8 30.6 30.5 30.3 29.8 29.6
Current at Pmax Impp A 7.66 7.58 7.50 7.42 7.18 7.10
Open-circuit voltage Voc V 37.1 36.9 36.8 36.6 36.0 35.8
Short-circuit current Isc A 8.16 8.08 8.00 7.92 7.68 7.59
C O N S T R U C T I O N M AT E R I A L SFront cover (material / thickness) low-iron tempered glass / 3.2mm
Cell (quantity / material /number of busbars) 60 / monocrystalline silicon / 12 or 5
Frame (material ) anodized aluminum alloy
Junction box (protection degree) ≥ IP67
Cable (length / cross-sectional area) 1000mm / 4mm2
E L E C T R I C A L P E R F O R M A N C E Electrical parameters at Standard Test Conditions (STC)
Module type YLxxxD-30b (xxx=Pmax)YLxxxD-30b 1500V (xxx=Pmax)
Power output Pmax W 320 315 310 305 290 285
Power output tolerances ΔPmax W 0 / + 5
Module efficiency ηm % 19.5 19.2 18.9 18.6 17.7 17.4
Voltage at Pmax Vmpp V 33.5 33.3 33.1 32.9 32.3 32.1
Current at Pmax Impp A 9.58 9.48 9.38 9.28 8.98 8.88
Open-circuit voltage Voc V 39.9 39.7 39.5 39.3 38.7 38.5
Short-circuit current Isc A 10.08 9.98 9.88 9.78 9.48 9.38
DS_YLM60CELL-30b_35mm_EU_EN_20190222_V04
Unit: mm
Q U A L I F I C AT I O N S & C E R T I F I C AT E SIEC 61215, IEC 61730, CE, ISO 9001:2015, ISO 14001:2015, BS OHSAS 18001:2007, SA 8000:2015
Yingli Green EnergyYingli Green Energy Holding Company Limited , known as “Yingli Solar”, is one of the world’s leading solar panel manufacturers with the mission to provide affordable green energy for all. Yingli Solar makes solar power possible for communities everywhere by using our global manufacturing and logistics expertise to address unique local challenges.
21.6%CELL EFFICIENCY
10 YEARPRODUCT WARRANTY
0 - 5 WPOWER TOLERANCE
25 Years Linear Warranty
YLM 72 CELL
File name: Corporate Logo with Tagline / Vertical.ai
Power Your Life
Yingli’s Linear Performance Warranty
25
Years
201510510%
97%
91%
80%
Industry Standard Warranty
Yingli’s Linear Performance Warranty
25Years
201510510%
98%
92%
82%
Industry Standard Warranty
N-Type Mono Poly
Y I N G L I S O L A R .CO M
Higher DurabilityThe multi-busbar design can decrease the risk of the cell micro- cracks and fingers broken.
High Power DensityHigh conversion efficiency and more power output per square meter, by lower series resistance and improved light harvesting.
PID ResistantTested in accordance to the standard IEC 62804, our PV modules have demonstrated resistance against PID (Potential Induced Degradation), which translates to security for your investment.
Advanced GlassOur high-transmission glass features a unique anti-reflective coating that directs more light on the solar cells, resulting in a higher energy yield.
Choosing the best P-type monocrystalline cells, YLM series modules are making the best out of your system. Trust in the expertise of Yingli and well proven technology.
IMPROVED POWER NEVER SETTLE FOR LESS
DURABLE
PID-FREE
YLM 72 CELL
Yingli Green Energy Holding Co., [email protected] Tel: +86-312-2188055
© Yingli Green Energy Holding Co. Ltd. DS_YLM72CELL-36b_40mm_EU_EN_20190507_V04
Y I N G L I S O L A R .CO M
File name: Corporate Logo with Tagline / Vertical.ai
Power Your Life
G E N E R A L C H A R A C T E R I S T I C S
Dimensions (L / W / H) 1960mm / 992mm / 40mm
Weight 22kg
Yingli Partners:
T H E R M A L C H A R A C T E R I S T I C SNominal operating cell temperature NOCT °C 45 +/- 2
Temperature coefficient of Pmax γ %/°C -0.39
Temperature coefficient of Voc βVoc %/°C -0.30
Temperature coefficient of Isc αlsc %/°C 0.06
O P E R AT I N G C O N D I T I O N SMax. system voltage 1000VDC/1500VDC
Max. series fuse rating 15A
Limiting reverse current 15A
Operating temperature range -40°C to 85°C
Max. static load, front (e.g., snow) 5400Pa
Max. static load, back (e.g., wind) 2400Pa
Max. hailstone impact (diameter / velocity) 25mm / 23m/s
C O N S T R U C T I O N M AT E R I A L SFront cover (material / thickness) low-iron tempered glass / 3.2mm
Cell (quantity / material/ number of busbars) 72 / monocrystalline silicon /12 or 5
Frame (material ) anodized aluminum alloy
Junction box (protection degree) ≥ IP67
Cable (length / cross-sectional area) 1100mm / 4mm2
Plug connector MC4 Compatible
PA C K A G I N G S P E C I F I C AT I O N SNumber of modules per pallet 27
Number of pallets per 40' container 24
Packaging box dimensions (L / W / H)
2000mm / 1140mm / 1145mm
Box weight 640kg
Unit: mm
• Due to continuous innovation, research and product improvement, the specifications in this product information sheet are subject to change
without prior notice. The specifications may deviate slightly and are not guaranteed.
• The data do not refer to a single module and they are not part of the offer, they only serve for comparison to different module types.
STC: 1000W/m2 irradiance, 25°C module temperature, AM1.5g spectrum according to EN 60904-3.Average relative efficiency reduction of 3.0% at 200W/m2 according to EN 60904-1.
NOCT: open-circuit module operation temperature at 800W/m2 irradiance, 20°C ambient temperature, 1m/s wind speed.
E L E C T R I C A L P E R F O R M A N C EElectrical parameters at Standard Test Conditions (STC)
Module type YLxxxD-36b (xxx=Pmax)YLXXXD-36b 1500V (xxx=Pmax)
Power output Pmax W 380 375 370 365 360 350 345
Power output tolerances ΔPmax W 0/+5
Module efficiency ηm % 19.5 19.3 19.0 18.8 18.5 18.0 17.7
Voltage at Pmax Vmpp V 40.1 39.9 39.8 39.7 39.3 38.8 38.6
Current at Pmax Impp A 9.48 9.40 9.30 9.20 9.17 9.03 8.94
Open-circuit voltage Voc V 48.4 48.3 48.2 48.1 46.6 46.4 46.3
Short-circuit current Isc A 9.95 9.87 9.80 9.73 9.70 9.50 9.40
Electrical parameters at Nominal Operating Cell Temperature (NOCT)Power output Pmax W 280.3 276.6 272.9 269.2 265.5 258.2 254.5
Voltage at Pmax Vmpp V 37.0 36.8 36.7 36.6 36.2 35.7 35.6
Current at Pmax Impp A 7.58 7.52 7.44 7.36 7.34 7.22 7.15
Open-circuit voltage Voc V 45.0 44.9 44.9 44.8 43.4 43.2 43.1
Short-circuit current Isc A 8.06 7.99 7.93 7.88 7.85 7.69 7.61
Warning:Read the Installation and User Manual in its entirety before handling, installing and operating Yingli Solar modules.
Q U A L I F I C AT I O N S & C E R T I F I C AT E SIEC 61215, IEC 61730, CE, MCS, ISO 9001:2008, ISO 14001:2004, BS OHSAS 18001:2007, SA 8000
PANDA BIFACIAL 72CELL
DUAL POWER MAXIMIZED YIELD
PANDA BIFACIAL modules generate power from the front side as well as from the back. Together with the cutting-edge PANDA n-type crystalline silicon solar cells, which wake up earlier than conventional p-type and go to sleep later, the energy yield can be highest increased by 30%.
Bifacial PowerIn contrast to conventional modules, PANDA BIFACIAL modules generate energy from both sides. As the backside makes use of the reflected and scattered light from the surroundings, the modules could yield more.
High YieldOnce used, PANDA BIFACIAL modules generate more energy, because of low LID, good low-light performance and temperature coefficient of n-type monocrystalline silicon solar cells.
DurabilityDurable PANDA BIFACIAL modules work well in muggy conditions, and inde-pendently tested for harsh environmental conditions beyond IEC standards, such as exposure to salt mist, ammonia, dust or known PID risk factors.
Optimal Self-cleaning@CLOptimal self-cleaning due to frameless module design.
Mechanical Performance@CFSpecially designed aluminium frames enhance the mechanical performance of modules and the installation efficiency of systems.
Yingli Green EnergyYingli Green Energy Holding Company Limited, known as “Yingli Solar”, is one of the world’s leading solar panel manufacturers with the mission to provide affordable green energy for all. Yingli Solar makes solar power possible for communities everywhere by using our global manufacturing and logistics expertise to address unique local challenges.Y I N G L I S O L A R .CO M
22.0%CELL EFFICIENCY
10 YEARPRODUCT WARRANTY
0 - 5 WPOWER TOLERANCE
30 Years Linear Warranty
Yingli’s Linear Performance Warranty
25Years
201510500%
97.5%
91.2%
80.7%
Industry Standard Warranty
Yingli’s Linear Performance Warranty
25Years
201510500%
98%
92%
82%
Standard Warranty
N-Type Mono Poly
PANDA Bifacial bifacial
Years
YGE G/G Linear Warranty
Industry Standard Linear Warranty
Spec
ified
Per
form
ance
Twin Max standard
PANDA BIFACIAL Linear Warranty
Industry Standard Linear Warranty
Years
22.39% power gain than normal 25 years warranty*In total additional 23.07% warranted power *
Spec
ified
Per
form
ance
97.5%
0%
80.7%
83.0%
1 5 10 15 20 25 30
+2.8%
+3.8%
+4.8%
+1.8%
+22.39%*
+0.8%+1.3%
+2.3%
+3.3%
+4.3%
+5.3%
+23.07%*
1 5 10 15 20 25 30
98%97.5%
80.7%
83.5%
0%
PANDA BIFACIAL 72CELL
© Yingli Green Energy Holding Co., Ltd. DS_PANDA BIFACIAL 72CELL_EU_EN_20190701_V0401
BSTC: (1000+Min (φIsc, φPmax)*135) W·m-2 irradiance, 25°C cell temperature, AM1.5 spectrum according to EN 60904-3. NMOT: temperature near maximum power point at 800W·m-2 irradiance, 20°C ambient temperature, 1m·s-1 wind speed.
O P E R AT I N G C O N D I T I O N S C O N S T R U C T I O N M AT E R I A L SMax. system voltage 1500VDC
Front and back cover (material / thickness)
low-iron semi-tempered glass / 2.5mm x 2
Max. series fuse rating* 20A Cell (material / number of busbar) n-type monocrystalline / 5-12
Operating temperature range -40°C to 85°C Frame (72CL / 72CF) none / anodized aluminium alloy
Fire resistance Class A Cable (length / cross-sectional area) 200mm / 4mm2
Hailstone impact (diameter / velocity) 25mm / 23m·s-1 Junction box (protection degree) ≥ IP67
Snow load, front (72CL / 72CF)Wind load, back (72CL / 72CF)
3000Pa / 5400Pa 2400Pa / 2400Pa
Plug connector (type / protec-tion degree)
RH 05-8 / IP67 QC4.10-cd / IP68
PA C K A G I N G S P E C I F I C AT I O N SPackaging Specifications@72CL Packaging Specifications@72CF
Dimensions (L / W / H) 1978mm / 992mm / 6mm Dimensions (L / W / H) 1984mm / 998mm / 32mm
Weight 27.5kg Weight 29.2kg
Number of modules per pallet 30 Number of modules per pallet 32
Number of pallets per 40’ container 22 Number of pallets per 40’
container 22
Packaging pallets dimensions (L / W / H) 2097mm / 1140mm / 1183mm Packaging pallets dimensions
(L / W / H) 2040mm / 1160mm / 1165mm
Pallet weight 900kg Pallet weight 987kg
Warning: Read the Installation and User Manual in its entirety before handling, installing and operating Yingli Solar modules.
Yingli Green Energy Holding Co., Ltd.Tel: +86-312-8922216 [email protected]
File name: Corporate Logo with Tagline / Vertical.ai
Q U A L I F I C AT I O N S & C E R T I F I C AT E SIEC 61215, IEC 61730, CE, ISO 9001: 2015,
ISO 14001: 2015, BS OHSAS 18001: 2007
T H E R M A L C H A R A C T E R I S T I C SNominal module operating temperature NMOT °C 39±2 Bifaciality
Temperature coefficient of PmaxγPmax % / °C -0.38 Bifaciality of Pmax
φPmax % 82.0
Temperature coefficient of Voc βVoc % / °C -0.30 Bifaciality of Voc φVoc % 99.1
Temperature coefficient of Isc αIsc % / °C 0.04 Bifaciality of IscφIsc % 81.5
E L E C T R I C A L P E R F O R M A N C E
Module type 72CL (72 cell, frameless): YLxxxCG2536L-1 72CF (72 cell, framed): YLxxxCG2536F-1 (xxx=Pmax)
Electrical parameters at Bifacial Standard Test Conditions (BSTC)
Power output Pmax W 420 415 410 405 400 395 390 385
Voltage at Pmax Vmpp V 39.70 39.50 39.30 39.10 38.90 38.60 38.40 38.10
Current at Pmax Impp A 10.72 10.64 10.56 10.47 10.38 10.31 10.22 10.16
Open-circuit voltage Voc V 48.40 48.20 48.00 47.80 47.50 47.30 47.10 46.90
Short-circuit current Isc A 11.13 11.07 11.00 10.94 10.88 10.82 10.77 10.71
Power output tolerance ΔPmax W 0 / + 5
Module efficiency@72CL ηmpp % 21.40 21.15 20.90 20.64 20.39 20.13 19.88 19.62
Module efficiency@72CF ηmpp, % 21.21 20.96 20.71 20.45 20.20 19.95 19.70 19.44
Electrical parameters at Nominal Module Operating Temperature (NMOT)
Power output Pmax, W 322.40 318.46 314.21 310.00 305.80 301.51 297.37 293.14
Voltage at Pmax Vmpp, V 37.69 37.50 37.31 37.12 36.93 36.65 36.46 36.17
Current at Pmax Impp, A 8.55 8.49 8.42 8.35 8.28 8.23 8.16 8.10
Open-circuit voltage Voc, V 45.90 45.71 45.52 45.33 45.05 44.86 44.67 44.48
Short-circuit current Isc, A 8.96 8.90 8.85 8.80 8.75 8.71 8.66 8.62
• Due to continuous innovation, research and product improvement, the specifications in this product information sheet are subject to change
without prior notice. The specifications may deviate slightly and are not guaranteed.
• The data do not refer to a single module and they are not part of the offer, they only serve for comparison to different module types.
*DO NOT connect Fuse in Combiner Box with two or more strings in parallel connection.
998
1984
32
200 200
1984
998
150
70
333
659
659
B
R3
6
14
70
B
Installation holes6-6×14
Grounding holes4-Φ6
Drainage holes8-3×8
SECTION A-A I SECTION B-B II ENLARGED III
A
III
992
1978
200 200
6
1978
Figure@72CL unit: mm
I-V curves at different irradiances
Figure@72CF unit: mm
20.5%CELL EFFICIENCY
10 YEARPRODUCT WARRANTY
0 - 5 WPOWER TOLERANCE
PANDA BIFACIAL modules generate power from the front as well as from the back side. Together with the cutting-edge PANDA N-type crystalline silicon solar cells, which wake up earlier than conventional P-type and go to sleep later, the energy yield can be increased by 10-30%*.
DUAL POWER MAXIMIZED YIELD
PANDABIFACIAL 144HCF
High Power Output5 Busbar half cells and series & parallel electrical structure can reduce CTM loss and increase module output power.
Yingli’s Linear Performance Warranty
25Years
201510500%
97.5%
91.2%
80.7%
Industry Standard Warranty
Yingli’s Linear Performance Warranty
25Years
201510500%
98%
92%
82%
Standard Warranty
N-Type Mono Poly
PANDA Bifacial bifacial
Years
TwinMAX Linear Warranty
Industry Standard Linear Warranty
Spec
ified
Per
form
ance
Twin Max standard
PANDA BIFACIAL Linear Warranty
Industry Standard Linear Warranty
Years
22.39% power gain than normal 25 years warranty*In total additional 23.07% warranted power *
Spec
ified
Per
form
ance
97.5%
0%
80.7%
83.0%
1 5 10 15 20 25 30
+2.8%
+3.8%
+4.8%
+1.8%
+22.39%*
+0.8%+1.3%
+2.3%
+3.3%
+4.3%
+5.3%
+23.07%*
1 5 10 15 20 25 30
98%97.5%
80.7%
83.5%
0%Yingli Green EnergyYingli Green Energy Holding Company Limited (NYSE: YGE), known as “Yingli Solar”, is one of the world’s leading solar panel manufacturers with the mission to provide affordable green energy for all. Yingli Solar makes solar power possible for communities everywhere by using our global manufacturing and logistics expertise to address unique local challenges.
*Depending on the environmental condition of installation.Y I N G L I S O L A R .CO M
PANDA BIFACIAL 30 Years Linear Warranty
Bifacial PowerIn contrast to conventional modules, PANDA BIFACIAL modules generate energy from both sides. As the backside makes use of the reflected and scattered light from the surroundings, the modules can yield up to 30% power more, depending on the albedo.
DurabilityDurable PANDA BIFACIAL modules work well in muggy conditions, and in-dependently tested for harsh environmental conditions beyond IEC standards such as exposure to salt mist, ammonia or known PID risk factors.
High YieldOnce used, PANDA BIFACIAL modules generate more energy, because of low LID, good low-light performance and temperature coefficient of N-type monocrystalline silicon solar cells.
Mechanical Performance No shading aluminium frames enhance the mechanical performance of mod-ules and the installation efficiency of system.
G E N E R A L C H A R A C T E R I S T I C SDimensions (L / W / H) 1956mm / 1046mm / 32mm
Weight 30.0kg
PANDA BIFACIAL 144HCF
Warning: Read the Installation and User Manual in its entirety before handling, installing and operating Yingli Solar modules.
Yingli Green Energy Holding Co., [email protected] Tel: +86-312-2188055
Y I N G L I S O L A R .CO M
PA C K A G I N G S P E C I F I C AT I O N SNumber of modules per pallet 32
Number of pallets per 40’ container 22
Packaging pallets dimensions (L / W / H) 2006mm / 1134mm / 1215mm
Pallet weight 1020kg
• Due to continuous innovation, research and product improvement, the specifications in this product information sheet are subject to change
without prior notice. The specifications may deviate slightly and are not guaranteed.
• The data do not refer to a single module and they are not part of the offer, they only serve for comparison to different module types.
Yingli Partners:
File name: Corporate Logo with Tagline / Vertical.ai
© Yingli Green Energy Holding Co., Ltd. DS_PANDA BIFACIAL 144HCF_EU_EN_20180615_V04
Q U A L I F I C AT I O N S & C E R T I F I C AT E SIEC 61215, IEC 61730, CE, ISO 9001:2008, ISO 14001:2004, BS OHSAS 18001:2007, SA 8000
C O N S T R U C T I O N M AT E R I A L SFront and back cover (material / thickness) low-iron semi-tempered glass / 2.5mm x 2
Cell (quantity / material / dimensions / number of busbar)
144 / monocrystalline silicon / 156.75mm x 78.38mm / 5
Frame anodized aluminum alloy
Junction box (protection degree) ≥ IP67
Cable (length / cross-sectional area) 350mm / 4mm2
Plug connector (type / protection degree) RH05-8 / IP67
O P E R AT I N G C O N D I T I O N SMax. system voltage 1500VDC
Max. series fuse rating 20A
Limiting reverse current 20A
Operating temperature range -40°C to 85°C
Max. snow load, front 5400Pa
Max. wind load, back 2400Pa
Max. hailstone impact (diameter / velocity) 25mm / 23m/s
Fire class A
Electrical parameters at Nominal Module Operating Temperature (NMOT)
Power output Pmax W 272.7 268.9 265.1 261.3 257.5
Voltage at Pmax Vmpp V 37.8 37.5 37.2 36.8 36.5
Current at PmaxImpp A 7.21 7.16 7.12 7.11 7.05
Open-circuit voltage Voc V 44.8 44.7 44.2 43.9 43.6
Short-circuit current Isc A 7.62 7.59 7.55 7.54 7.52
NMOT: temperature near maximum power point at 800W/m2 irradiance, 20°C ambient temperature, 1m/s wind speed.
E L E C T R I C A L P E R F O R M A N C EElectrical parameters at Standard Test Conditions (STC)
Module type YLxxxCG2536F-2 1/2 (xxx=Pmax)
Power output Pmax W 360 355 350 345 340
Power output tolerance ΔPmax W 0 / + 5
Module efficiency ηm % 17.6 17.4 17.1 16.9 16.6
Voltage at Pmax Vmpp V 39.8 39.5 39.2 38.7 38.5
Current at PmaxImpp A 9.05 8.99 8.94 8.92 8.85
Open-circuit voltage Voc V 47.2 47.1 46.6 46.3 46.0
Short-circuit current Isc A 9.47 9.43 9.39 9.37 9.35
STC: 1000W/m2 irradiance, 25°C cell temperature, AM1.5 spectrum according to EN 60904-3.Average relative efficiency reduction of 1.9% at 200W/m2 according to EN 60904-1.
Unit: mm
T H E R M A L C H A R A C T E R I S T I C SNominal module operating temperature NMOT °C 39±2
Temperature coefficient (Pmax) γPmax %/°C -0.38
Bifaciality (Pmax) φPmax % 82.0
Temperature coefficient (Voc) βVoc %/°C -0.30
Bifaciality (Voc) φVoc % 99.3
Temperature coefficient (Isc) αIsc %/°C 0.04
Bifaciality (Isc) φIsc % 81.5
CHROMAGEN ESPAÑA S.L.Calle La Red Quince, Nave 20.
Poligono Industrial La Red.Alcalá de Guadaira.
41.500 Sevilla (España)T. 954 184 541
F. 955 600 [email protected]
DELEGACIONES COMERCIALESCENTRO T. 687 874 506
LEVANTE T. 648 007 662SUR T. 650 934 776
NORTE T. 620 093 224
www.chromagen.es
FÁBRICA
• Lineas completamente automáticas con una capacidad de hasta 150Mw
• Rango de módulos PV de 5 Wp a 325 Wp
• Instalaciones distribuidas en un área de 80,000 pies cuadrados
• CB para IEC 61215, 61730 1-2• IS0 9001-2015, ISO 14001 y Fabrica
certificada por OHSAS 18001
SEGURO DE CALIDAD
• Estándares de control de alta calidad• Componentes de alta calidad• Uso de encapsulante distintivo y
lámina trasera• Módulos libres de PID (85 °C / 85RH• durante 288 horas)• Distancia al borde optimizada para
ofrecer un diseño resistente y de alta calidad
• Prueba de línea de alta potencia• (H.V + GB + IR)
• Comprobación de electroluminiscencia 2x100% para garantizar módulos sin defectos
• FF Elevado para una mejor conversión de eficiencia de energía
• Resistencia a la torsión y a la corrosión con un marco de aluminio anodizado
• Diseño único del laminado posterior para una alta resistencia a la entrada de humedad