PAPER CRAFT - Manualidades a Raudales

Thank you for downloading the "YZF-R1" paper craft model. By simplyfollowing this manual while referring to the names and numbers shown on the

parts sheets, you can assemble an authentic-looking replica of the YZF-R1.

Assembly instructions: Fifteen A4-sized sheets.Paper craft: Fourteen A4-sized sheets with 170 parts in all

PAPER CRAFTAssembly Instructions

These instructions apply only to the "YZF-R1".These Paper Craft parts are easier to work with when printed out on strong,thick paper (like postcard stock).*In creating these Paper Craft models we use 135kg Kent paper stock (0.18mm).

- 2 -

Note

TO BEGIN

Item of Caution*Take care when using sharp or pointed objects or when

using bladed cutting tools. Place a heavy sheet of paper

under the paper you want to cut.

*Use glue and other adhesives only in well-ventilated

areas.

*When printing, use a slightly reduced font size as there

are many differences in dimensions depending on the

type of printer used.

Tools and materials needed-Ruler -Scissors - Blade cutter or "Exacto-knife" - Awl or

other pointed tool (for making a folding crease) - Felt

pen - Pin set - Glue - Hand towel ( for cleaning your

fingers) - Dictionary or other heavy book ( to press the

papers flat)

HOW TO ASSEMBLE

*Follow the working method and markings carefully.

*Cut carefully along the outter line with a cutting blade,

Exacto-knife or scissors.

*Cut carefully with a cutting blade, Exacto-knife orscissors.

*For folding parts, first use an awl or other pointedtool to make a light crease along the dotted or solidline. This will make the folds straight. Avoid makingstrong creases, as this will cause the paper to tear.

*As an adhesive, white, wood glue is recommended.Avoid over application as this will cause the paperto wrinkle.

*Before beginning assembly, test adhesive amountson extra paper.

*Occasionally, white spots will be apparent on foldsand cuts. Use a marker or pencil to fill-in these spots.It is recommended that this be done after each stageof assembly because coloring becomes more diffi-cult once parts are assembled.

One - point Advice

Basic working method and markings

Fold along these lines. The printed

surface should be on the outside of

the folded shape.

Solid lines

Dotted line

Fold along these lines. The printed

surface should be on the inside of

the folded shape.

Broken lines

Cut out parts marked with an as-

terisk(*).

Cut along these lines

Red dots are the reference positions

for gluing surfaces.

- 3 -

A-1

A-1

A-2

A-3

A-5A-4

A-6

A-7A-8

A-9A-10

First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.

Indication ofWorking Methods Fold or Curve Adhere

1 Assembling the Front Cowl

Reference photo

Fold the parts as shown above so that the dotted lines onthe gluing surfaces are lined up before gluing each sec-tion.

Glue this section fromthe inside of A-1.

FRONT COWLSheet A, 10 parts in total

Please use the dots on each component as reference when gluing surfaces.

- 4 -

B-1B-2

B-3B-4

B-7B-6

B-5

B-8

B-9

B-11B-10

B-13B-12

B-18

B-14B-15

B-16B-17

B-18

Fold the parts as shown above so thatthe dotted lines on the gluing surfacesare lined up before gluing each section.

Reference photo

Be careful not to leave any glue on B-5,8 and 9 when inserting B-10 and 11.



2 Assembling the Steering

STEERINGSheet B, 18 parts in total

Apply glue on the areaindicated in the illustration.

Please use the dots on each component as

reference when gluing surfaces.

- 5 -

C-1

C-1

C-3

C-5

C-4C-2

C-7

C-8

C-11 C-12

C-9

C-10

C-15C-16C-17C-13C-14

C-23

After assembling both Frames A and B, glue the two on the gluing surface shown below.

Gluing surface (to Frame B)

Be sure to assemble inthe right direction

C-6

Fold the parts as shown above so thatcorresponding gluing areas are lined upbefore gluing each section.

Crease well in this area onboth sides of the component.



3 Assembling the Frame

FRAMESheet C (x2), 23 parts in total

[Frame A]

Gluing surface (to Frame A)

[Frame B]



Reference photo


C-18C-19C-20C-21C-22

- 6 -

D-1

D-2

D-3

D-4

D-1

D-2Reference photo



4 Assembling the Fuel Tank

FUEL TANKSheet D 4 parts in total

Fold the parts as shown above so thatthe dotted lines on the gluing surfacesare lined up before gluing each section.


Please use the dots on each component as

reference when gluing surfaces.

E-1

E-2

E-3

E-4

E-5E-6E-7E-8

E-11

E-14

E-15

E-12

E-13

E-16

E-17

E-18

E-19E-20 E-21

E-22

E-23

E-24

E-25E-26

ENGINESheet E, 26 parts in total

- 7 -

5 Assembling the Engine

E-9E-10

Reference photo




- 8 -

F-1

F-2

F-3

F-4

F-5

F-6

F-7

F-8

F-9

F-10F-11 F-12

F-13 F-14

Gluing area

Reference photo

UNDER COWLSheet F, 14 parts in total

Adhere

6 Assembling the Under CowlFirst, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.

Indication ofWorking Methods Fold or Curve

Glue this section from the inside of F-7

Glue this section from theinside of F-8

Glue this sectionfrom the inside ofF-1




Apply glue in the areaindicated with blue dottedlines and attach them tothe back of F-7 and F-8.


- 9 -

G-17

G-1G-2G-3G-4

G-9G-10

G-13G-14

G-5G-6G-7G-8

G-11G-12

G-15G-16

G-18

G-19

G-20

G-21

G-22

G-23

G-24G-25

G-26

[Exhaust A]

After assembling both Exhaust Pipes A and B, glue the two on the gluing surface shown below.



7 Assembling the Exhaust

Reference photo

EXHAUSTSheet G, 26 parts in total

When assembling G-1 through G-8, refer to the photo of the finished modelbelow to assemble them with the right angles.

When assembling G-18, 19, and 20, refer to the photoof the finished model below to assemble them withthe right angles.

Gluing surface(to Exhaust A)

Gluing surface(to Exhaust B)

[Exhaust B]




- 10 -

H-2

H-4

H-5

H-3

H-6

H-11

H-7H-8H-9H-10

Assembly Instructions

H-1

Reference photo



8 Assembling the Rear Arm

REAR ARMSheet H, 11 parts in total

Follow the step-by-step assembly instructions shown below.1 2 3

Glue H-1 and H-2 together.

After assembling H-3 through the arm of H-1 as shownin the illustration, glue H-3 to H-1 and H-2.

Glue H-6 to H-1.

Glue H-4 to H-1. H-4 should straddle H-3 and H-6.

Refer to the illustration to assemble other parts.


- 11 -

I-1

I-2

I-3

I-4

I-5

I-6I-7

I-8 I-9

I-10

I-11I-12

I-13

I-1 I-2

Reference photo

SEAT COWLSheet I, 13 parts in total



9 Assembling the Seat Cowl



J-1

J-2

J-3

J-4

J-5

J-6

L-2L-1

L-4L-5L-6

[Front Tire]

Insert the assembled wheel in the assembled tire before gluing them together.FRONT TIRESheet J & L, 12 parts in total

- 12 -

L-3

K-1

K-2

K-3

K-4

K-5

K-6

L-9L-10L-11

L-8 L-7

L-12L-13

Gluing areaAssemble J-2 in thesame manner



10 Assembling the Front and Rear Tires

[Front Wheel]

REAR TIRESheet K & L, 13 parts in total

Insert the assembled wheel in the assembled tire before gluing them together.

[Rear Tire] [Rear Wheel]

Reference photo

Reference photo

Gluing areaAssemble J-1 in thesame manner

Gluing areaAssemble K-2 in thesame manner

Gluing areaAssemble K-1 in thesame manner



glue the assembled parts in numerical order through .

- 13 -

11 Finish

Assembly Instruction

Detailed Instructions for Assembling theFrame and the Seat Cowl

Gluing area

Apply gluein the back

After inserting the frame inthe Seat cowl up to the reddotted lines, glue the twotogether from theinside.

Insert the frame up tothese red dotted lines.

Å¶

Steering

Front Cowl

Under Cowl

Front Tire

Frame

Fuel Tank

Exhaust

Engine

Rear Arm

Rear Tire

Seat Cowl


- 14 -

12 Assembled Model and the List of PartsPlease refer to the photo below when attaching each component.

RIGHT FRONT

G-1G-2G-3G-4G-5G-6

G-7G-8G-9G-10G-11G-12

G-13G-14G-15G-16G-17G-18

G-19G-20G-21G-22G-23G-24

G-19G-20G-21G-22G-23G-24

J-1J-2J-3J-4J-5J-6

J-7J-8J-9J-10J-11J-12

G-25G-26

I-1I-2I-3I-4

I-9I-10I-11I-12I-13

I-5I-6I-7I-8

B-1B-2B-3B-4B-5B-6

B-7B-8B-9B-10B-11B-12

B-13B-14B-15B-16B-17

D-1D-2

D-3D-4

A-1A-2A-3A-4A-5

A-6A-7A-8A-9A-10

Exhaust

Seat Cowl

Front Tire

Fuel Tank

Steering

Front Cowl

- 15 -

LEFT REAR

E-1E-2E-3E-4E-5E-6

E-7E-8E-9E-10E-11E-12

E-13E-14E-15E-16E-17E-18

E-19E-20E-21E-22E-23E-24

E-19E-20E-21E-22E-23E-24

K-1K-2K-3K-4K-5K-6

K-7K-8K-9K-10K-11K-12

E-25E-26F-1

F-2F-3

F-4F-5F-6

F-7F-8F-9

F-10F-11F-12

F-13F-14

C-1C-2C-3C-4C-5C-6

C-7C-8C-9C-10C-11C-12

C-13C-14C-15C-16C-17C-18

C-19C-20C-21C-22C-23

H-1H-2H-3

H-4H-5H-6

H-7H-8H-9

F-10F-11

12 Assembled Model and the List of PartsPlease refer to the photo below when attaching each component.

Under Cowl

Frame

Engine

Rear Arm

Rear Tire

Documents

PAPER CRAFT - Manualidades a Raudales