Plier PackMADE IN GERMANY

$95.00Part No. 0042

Inc GST

Professional quality, made in Germany•Contains 200mm high leverage •combination pliers and diagonal cutters with plastic coated handles

02 01 200

74 01 200

Contains six screwdrivers for slotted & phillips screws•Each screwdriver features the famous Wera Kraftform® handle •for quick and effortless working. Wera Black Point tip provides increased corrosion resistance•Long service life•

Kraftform® Classic Screwdriver Set

$34.95Part No. 05 031280 001

Inc GST

Set of 6 parallel pin punches •in plastic caseSize range: 3-10mm ø•Length: 150mm•

Parallel Pin Punch Set

$39.50Part No. 425170

Inc GST

The ultimate power flaring tool designed for use on the car.•For brake pipe sizes: SAE Single and Double flares •- 3/16” and 4.75mm, DIN Single flares - 4.75mm.Revolutionary patented design, developed to overcome •the difficulties of creating flares on the vehicle without sacrificing quality. Creates SAE or DIN single or double lap flare forms in an •instant. Comfortable in use, light weight and stylish.• Extremely powerful - the design incorporates a unique •hydraulic powerpack. Enables corroded pipework to be replaced or pipes renewed •following accident damage.

Flaremaster 2 - Automotive Flaring Tool

$395.00Part No. 027250

Inc GST

The Best European Tools at Hot Prices! Only Available 1 AUG - 30 SEP 2010

MADE IN GERMANY MADE IN GERMANY

Portable 4 & 5 Gas Analyser KitsFault diagnosis, tuning, and pre-MOT testing.•Easy to use – no need for daily reconfiguration.•Ideal for both static and dynamic testing.•Light weight – only 1.1kg – truly ‘hand-held’.•Fast warm up – only 150 seconds.•Internal memory – stores up to 250 test results manual or automatic mode.•PC compatible (using optional software).• Long life internal battery – full 8 hours between recharges (via mains or 12v).•Infra-red Gas Bench measures the three IR gases (CO, HC, CO2).•O2 & NOX are measured using electrochemical sensors.• Test results can be recorded either manually (by pressing the appropriate key), •or automatically at timed intervals ideal for on-the-road tests so that no driver intervention is required during the test.Provides Lambda/AFR measurement and corrected CO.•

$4950.00Part No. 324200

Inc GST

$5950.00Part No. 324232

Inc GST

Air Assisted Caliper Piston Wind Back Tool

Air operated ram applies pressure to the •caliper piston while the handle is rotated by hand.Easy to use – operates on standard •workshop air supply.Reversible – suitable for both left and •right hand applications.Supplied with adaptor which covers a •range of popular vehicles.3/8” sq drive.•

$129.50Part No. 036198

Inc GST

Part No. Drive Range Length Price Inc GST

800200 1/2” 40-200Nm 455mm $279.00

800330 1/2” 60-330Nm 690mm $329.95

800399 3/4” 80-400Nm 683mm $445.00

Premium quality for medium/•heavy engineering, workshop, construction, aero, marine & commercial vehicle applicationsEach with calibration certificate•Made in England•

Torque Wrenches Motorq

DescriptionKit Part No.

324200 324232

Type 4 Gas Analyser 5 Gas Analyser

Gases Measured CO/CO2/O2/HC CO/CO2/O2/HC/NOX

OIML Class 1 Certificate Class 1 accuracy Class 1 accuracy

Corrected CO yes yes

Fuel Types: Petrol/LPG/CNG yes yes

Exhaust Probe – Standard yes -

Exhaust Probe – Stainless Steel - yes

Carrying Case yes yes

4 Gas Analyser 5 Gas Analyser

Available 1st August- 30th September 2010

Prices valid 1 August to 30 September 2010. Please refer to the relevant product catalogues for more comprehensive product information. As participating stores are independant businesses, they reserve the right to set their own selling prices. Pricing throughout this publication is the recommended trade price and may vary from store to store. Every effort has been made to

ensure stocks are available at the time of printing. Should any item not be in stock on placement of orders, stores will endeavour to procure those published items. Product images are for illustration purposes only. Produced by Tridon Australia Pty Ltd ACN 001 398 698 ABN 90 001 398 698

The screw operated •concentric action and self adjusting legs make it easy to useSelf-locking, self positioning •legs and force screwSelf-locking legs eliminate •the danger of the puller legs slipping off under loadCan be used in 2 or 3 leg •format

Concentric Pullers

Part No. Capacity Reach Max Spread Min - Max Price Inc GST

100110 2 Tonnes 80mm 25 - 120mm $169.95

100120 3 Tonnes 120mm 30 - 140mm $195.50

100130 5 Tonnes 160mm 35 - 270mm $295.00

100140 8 Tonnes 210mm 50 - 300mm $339.00

$95.00Part No. 077521

Inc GST

Ford Duratorq Timing Tool Kit for Diesel - 4 pc

Applications: Diesel Ford Duratorq 1.4TDCi, 2.0 TDCi, •2.4Di (belt & chain models)Also suitable for PSA Group 1.4 - 1.6HDi applications•

$95.00Part No. 077523

Inc GST

Applications: Petrol 1.25 / 1.4 / 1.6 / 1.8 / •2.0 16v PetrolNow updated to include latest 1.6 TI-VCT •series eg. Focus/CMax 1.6

Ford Zetec Timing Tool Kit for Petrol - 4 pc

$89.00Part No. 076500

Inc GST

Hardened and tempered stainless steel gauge.•Large LCD display.•Metric or imperial read-out.•Range: 0-25mm / 0-1”.•Resolution: 0.01mm / 0.0005”.•Accuracy: ±0.05mm / 0.002”.•Battery Type: SR44 / LR44.•

Digital Tyre Tread Depth Gauge

$49.50Part No. 022900

Inc GST

Simple and easy to use•Locks twin camshaft to allow engine repairs to be carried •out such as timing belt replacementApplications: GM Astra F, Cavalier, Calibra, Vectra, Omega•

Cam Locking Tool - Ecotec 16v 1.8, 2.0

$82.50Part No. 077524

Inc GST

Universal Sprocket Holding Wrench

A multi-application wrench with variable •adjustmentApplication: Diesel chain driven and •diesel belt driven Ford Focus, Fiesta, Tourneo, Transit

MADE IN GERMANY MADE IN GERMANY

Handy Belt

Pouch!

The unbreakable ratchet with •hammer function, 2 tools in 1.The Koloss is a reversible, heavy-•duty ratchet that can transfer at least 600Nm of torque. A double pawl mechanism and •a return angle of only 6˚ allows you to tighten and loosen screws quickly and accurately even in cramped conditions.

Koloss Ratchet Hammer ½“ Drive

$215.00Part No. 05 073232 001

Inc GST

NEW!

NEW!

Ideal tools for holding belt pulleys when removing or replacing the •pulleys on water pumps, alternators, power steering pumps etc.Can also be used to rotate camshafts and crankshafts during engine •timing service workThe hold is tighter than with a normal strap wrench, therefore these tools •can also be used to remove oil and fuel filters where access permits

Pulley Holding Tools

Part No. Description Handle Length Belt Length Price Inc GST

077405 V Belt 365mm 800mm $76.45

077410 Grooved 365mm 800mm $115.45

Saves time and money!

Using the gas analyser as a diagnostic tool enhances its use.Some key faults that have an effect on gas analysis are:1 - Rich Mixture2 - Weak Mixture3 - Ignition Misfire4 - Fuel Misfire5 - Tight Valve Clearance6 - Incorrect Ignition Timing7 - Incorrect Valve Timing8 - Faulty Catalytic Converter

Diagnostic Applications

$279.00FROM

Inc GST

UNBREAKABLE!

Hammer Function

Available from:

Requires 40% less effort compared with conventional •combination pliers due to optimised transmission ratioParticularly effective crosswise serrated gripping zone in the jaws •for strong gripping and pullingAdditional gripping zone below the articulated joint for powerful •leverage and pressing performanceWith cable puller in the joint•With universal mandrel crimping point under the joint•For medium and hard wire•Length 240mm•

Linesman Plier

Concretor’s Nippers High Leverage

MADE IN GERMANY

MADE IN GERMANY

MADE IN GERMANY

MADE IN GERMANY

MADE IN GERMANY

$97.50Part No. 0911240

Inc GST

$49.50Part No. 9911250

Inc GST

$550.00Part No. 9532038

Inc GST

Cable Shears with Telescopic Handles

The angled telescope handle allows individual adjustment of the opening •width, reducing handforce requiredHeavy-duty telescopic handles made of oval aluminium tubing; extendable up to 700 •mm for maximum leverage on large cable diameters; retractable down to 550 mm for minimum space requirements during transportEasy and clean cut thanks to optimised cutting edge geometry•Adjustable screw joint •

Part No. mm Ø mm mm2 MCM

95 32 038 550 38 280 550

Higher cutting performance than conventional concretors’ •nippers: easier work due to high transmission ratio Slim design, low weight, balanced weight distribution•High damping of the cutting stroke: reduced strain on tendons •and muscles Particularly suitable for work in confined areas•For medium and hard wire•Length 250mm•

Self-controlled adjustment by simply •squeezing the handlesIdeal for frequent changeover to work •pieces of different sizeOne-hand operation for left and right hand•Self locking ensuring no slipping and •requires minimal strength in operationChrome vanadium steel, oil-hardened and •temperedLength 250mm•

Smart Grip™ Water Pump Pliers

$85.00Part No. 8501250B

Inc GST

MADE IN GERMANY

Plier Wrenches

Excellent for gripping, holding, pressing and bending workpieces•For careful installation of finished-surface components•Zero backlash jaw surface pressure prevents damage to edges of •sensitive componentsFast adjustment directly on the workpiece by pushing a button•No unintentional shift of the gripping jaws and no slipping of •the joint

Part NoLength

(mm)Working Capacity Price

Inc GST inch for Hex (mm)8603150 150 1” 27 $115.00

8603250 250 1 3/4” 46 $125.00

MADE IN GERMANY

Circlip Plier SetContains 4 popular circlip pliers •for internal and external circlipsLong service life•Solid style, forged•Non slip tips•

$149.95Part No. 001956

Inc GST

4 Piece

Blades are made from •100% stainless steel Prevents rust stains or •pitting corrosion caused by extraneous rust that is generated by the use of screwdrivers with a conventional steel bladeSix piece set in display •carton & rack

Kraftform® Stainless Steel Screwdriver Set

6 Piece

$85.00Part No. 05 032060 001

Inc GST

$67.50Part No. 05 105650 001

Inc GST

$84.50Part No. 05 028062 001

Inc GST

The high quality •Kraftform® Plus 300 Series screwdrivers feature the Kraftform® handle, which is perfectly adapted to the palm & sits firmly in the handSix piece set in display •carton & rackLasertip• ® treatment to the tip, creates “bite” meaning less slippingGerman quality•

Kraftform® Plus Series 300 Set

For TORX• ® socket screwsWith holding function: The •optimized profile wedges the screw to the toolErgonomic designed multi-•component handle. Seven piece set in display •carton & rackGermany quality•

Kraftform® Plus Torx® Set

100 piece set to suit electric •drills or manual useExtra hard•

Bit Pack

Kraftform® Plus Chiseldriver Set

Six piece screwdriver set in •display carton and rackWith impact cap and “pound-•thru” bladeVersatile tool for tough jobs in •workshops and in industryThe tool is so rugged that seized •screws can be loosened and seized hose clamps knocked offIt can also be used as a chisel•

Features the Kraftform® handle •and Lasertip® technology to avoid injuries and damage to surfaces caused by slipping out of the screwSafe working up to 1000 volts•Includes 247 voltage tester•Ergonomic designed multi-•component handle.Six piece set in carton & rack•

Kraftform® Plus Series 100 VDE Set

$75.00Part No. 05 006147 001

Inc GST

$39.95Part No.05 031282 001

Inc GST

Features Kraftform® ergonomic handle •with anti-roll protectionSafe working up to 1000 volts•Wera Black Point tip reduces wear and •extends service life

Kraftform® Classic VDE Screwdriver Set

Zyklop Ratchet Set 3/8” Drive 22 Piece

The unbelievably fast Zyklop ratchet from •Wera GermanyThree times faster than conventional •ratchetsFive ratchet types in one tool, plus •functions as a screwdriverSwivelling head for ratchet flexibility•Parts securely stored in a high quality, •handy foam tray. Part Number Head Size Length Qty

05 072440 001 PH1 25mm 100

05 072441 001 PH2 25mm 100

Set of 6 in a plastic case•Contains 5 taper punches •1-5mm plus centre punchMade in Germany•

Taper Punch Set

$27.50Part No. 424120

Inc GST

$17.50Part No. 380240

Inc GST

$4.95Part No. 430120

Inc GSTCentre PunchForged punches are quenched and •tempered to resist hard working stressLength 120mm, Diameter 10mm, Tip 4mm•Made in Germany•

Slitting ChiselFor stone and metal cutting•Length 240mm, Diameter •26x7mm, Tip 26mmMade in Germany•

$17.50Part No. 310250

Inc GSTMade of hardened chrome vanadium •steel to resist hard working stress and offer a long service lifeLength 250mm, Diameter 23x13mm, •Tip 25mmMade in Germany•

Flat Cold Chisel

$59.50Part No. RCP4

Inc GST

Chisel & Punch SetSet of 3 chisels & 1 punch in plastic wallet•Contains 200 & 250mm flat cold chisels, •175mm cross cut chisel and centre punchMade in Germany•

$49.95Part No. RCC3

Inc GST

Flat Cold Chisel Set

Set of 3 chisels in plastic wallet•150,200,250mm•Premium quality•Made in Germany•

MADE IN GERMANY

$89.00Part No. 7101200R

Inc GST

New lever action design•Black atramentised, handles non-slip plastic coated•Cutting edges for heavy-duty application on soft, medium hard •and hard wires (i.e. fencing)With reduced hardness of the cutting edges for a higher •tolerance against lateral loadsMax. • Ø4mm hard wire (max. 48 HRC)Not suitable for piano wire•Length 200mm•

Knipex CoBolt® Compact Bolt Cutter NEW!

FENCING GRADE

BlackLaser® Hex Key Sets

MADE IN GERMANY

Fast adjustment directly on the workpiece•Self-locking on pipes and nuts: no slipping on •the workpiece and low handforce requiredChrome Vanadium electric steel, oil-hardened •and tempered

“Cobra®” Water Pump Pliers

Kraftform Kompakt® 28The Wera Kraftform Kompakt 28 is a multifunction screwdriver with six different sized •bits neatly integrated into the storage compartment. Included is a universal stainless steel bit holder that fits both the screwdriver handle or most power drill chucks. For both manual and machine screwdriving jobs•Bit holder with stainless tube•Integrated six bit magazine•Two position telescopic blade•Removable blade•German quality•

$75.00Part No. 05 073240 001

Inc GST

$89.50Part No. 05 018282 001

Inc GST

1 2 3 4

Open the handles after the first partial section using the ratchet principle

Repeat cutting and opening procedure until the cable is cut completely

PREVIOUS NEW

Part No Length (mm)

Working Capacity PriceInc GST For Pipes (inch) For Nuts (mm)

87 01 125 125 1 27 $46.95

87 01 150 150 1 ¼ 30 $52.50

87 01 180 180 1 1/2 36 $55.00

87 01 250 250 2 46 $59.50

87 01 300 300 2 ¾ 60 $79.95

87 01 400 400 3 1/2 95 $137.50

Cu + Al multi-conductor cable, strand and multi-stranded

MADE IN GERMANY MADE IN GERMANYMADE IN GERMANY MADE IN GERMANYMADE IN GERMANY MADE IN GERMANY

Mechanics Plier Pack

Contains 4 popular plier/cutter tools for highest performance•Includes 250mm Cobra Water Pump Pliers, 200mm Snipe Nose, •Combination Pliers and Diagonal Cutting Nippers

The special treatment of BlackLaser® Hex keys provides •improved corrosion protection for a longer service lifeClearly legible laser marking indicating the key size •ensures that the correct tool is found quickly and easilyMetric nine piece set 1.5-10mm•

Part Number Features Price Inc GST

05 021735 001 Standard $29.50

05 022086 001 Ball End $32.50

$195.00Part No. 0035

Inc GST

$75.00EACH

Inc GST

Forged punches are quenched & •tempered to resist hardworking stressMade in Germany•

Parallel Pin Punches

Part No. Length (mm) (mm) (mm) Price

450 002 150 10 2 $7.50

450 004 150 10 4 $7.50

$7.50EACH

Inc GST

Stainless Steel “POUND-THRU”

100 Piece1000V

NEW!

NEW!EXTENDABLE HANDLES UP TO 700MM

angled ratchet head

available mid august

$425.00Part No. 05 134058 001

Inc GST

Standard

Ball End

With Fish Tape Puller & Crimper

3

7

Removable Blade

Integrated Bit Magazine

You’ll never want to put

it down! Easy Fit