PART NO: MABP015 59 · Injector return flow common rail DIESEL • Designed for testing the return flow pressure on common rail diesels including Bosch VDO/ • Siemens and Delphi

PROFESSIONAL TOOLS

Bluetooth® Vehicle Monitor

$59.95PART NO: MA98414

• Real-time digital dashboard of vehicle conditions

• Monitor speed, RPM, battery voltage, engine temp etc

• Monitor fuel consumption and driving behaviour

• Diagnostic function to scan, read and clear fault codes

VEHICLE MONITORMA98414

48mm

25mm

Lithium Jump Starter• Lithium Jump Starter (MA35000)

with FREE LED Lenser Torch

• 1200 Amp peak output @ 12V

• Automatic voltage sensing

• 35000mAh capacity LiFePO cells

• Full safety protections

• Starts up to 15L diesel engines, dependant on battery and engine condition

$499.00PART NO: MABP015

• Heavy Duty Power Pack Plier Set (002011S) with FREE Long Nose Pliers (26 12 200)

• Includes popular Knipex Cobra (250mm), high leverage combination pliers (200mm) and high leverage diagonal cutters (200mm)

• Great value!

• Made in Germany

bonuspack!

Heavy Duty Power Pack Plier Set 3 Piece

FREE knipex long nose pliers

• Parallel Pin Punch XXL Set (425154) with FREE Flat Cold Chisel Set (RCC3)

• Set of five parallel pin punches XXL in foam tray with quality case

• Complete with hand guard

• Punch Sizes: 8-16mm

• Made in Germany

Parallel Pin Punch XXL Set5 Piece

$199.00PART NO: KBP012

$220.00PART NO: RBP005

FLAT COLD CHISEL SET 3 PIECE

PROFESSIONAL TOOLS

Concrete Mesh Cutter• Concrete Mesh Cutter (HITRCA1050) with FREE Knipex End Cutting Nippers (68 01 280)

• Designed for cutting extra hard steel concrete mesh

• Small cutting head for easy access into restricted spaces

• Replacement cutting heads also available

• Length: 1050mm

• Made in Japan

FREE knipex END CUTTING NIPPERS

$249.00PART NO: HBP007

• Air operated cleaning gun for degreasing and cleaning parts

• Flexible head allows for deep cleaning in hard to reach areas and crevasses

• Suitable to use with engine degreaser and non flammable solvents

Spray Cleaning GunFlexible Hose 320mm Pneumatic 1 Litre

$64.95PART NO: 305165

NEWPRODUCT

Wheel Hanger PinUniversal

• Ideal for fitting and removing heavy SUV and 4x4 wheels including wheels with spacers

• Aligns brake disc and hub when fitting wheels

• Includes storage wallet

• Male: M12x1.50, M14x1.25, M14x1.50, M16x1.50

• Female: M12x1.50

$79.95PART NO: 309110

• Vernier Caliper (322200) with FREE Rule Set (TRS01)

• Professional digital vernier caliper provides metric and imperial read outs

• Includes storage box with foam tray

• Range: 0-150mm (0-6”)

Vernier Caliper Digital 150mm/6” $149.95

PART NO: NBP018

Stainless Steel Rule 1000mm / 36" Metric & Imperial • Stainless Steel Rule (100036) with FREE T-Bevel (322016)

• Double sided metric and imperial with graduations on both upper and lower edges

• Manufactured from high grade stainless steel

• Width:35mm

• Thickness: 1.5mm

• Made in Japan

FREE T-BEVEL WITH LEVEL

$69.95PART NO: NBP058

PressureSprayer 2 Litre

• Pressure Sprayer (305154) with FREE Measuring Tape (321905)

• Pump action pressure sprayer with heavy duty viton seals

• Ideal for most workshop liquids and solvents

• Adjustable nozzle from mist to direct jet spray pattern

FREE rule set2 PIECE

FREE MEASURING TAPE STEEL WIDE BLADE5 METRE HEAVY DUTY


• Small and light weight key chain light

• Long battery life of up to 6 hours

• Up to 25 lm illumination

FREE LED Lenser torch

NEWPRODUCT

NEWLarger

Size

4 FOR THE PRICE

OF 3

AVAILABLE 1 OCT - 31 DEC 2018 . ALL PRICES INCLUDE GST

tool sale

1 OCT - 31 DEC 2018 . ONLY WHILE STOCKS LAST . ALL PRICES INCLUDE GST2 1 OCT - 31 DEC 2018 . ONLY WHILE STOCKS LAST . ALL PRICES INCLUDE GST 3

tool saleDiesel Injector Tester Mechanical 0-8700PSI (0-600BAR)

• Enables testing of diesel injectors by checking leakage, spray patterns, atomisation and cracking/opening pressure

• Transparent spray guard enclosure circulates fluid back

• Manufactured from high grade aluminium and steel

• Includes three adaptors

• Manometer (Dual Scale): 0-8700psi/0-600bar

$675.00PART NO: 307350

Glow Plug Test KitMulti Voltage

• Measure and display resistance of the glow plug to compare reading against the glow plug specification and identify the condition of the glow plug

• Suitable for all types of glow plugs ranging from 4.0V to 24.0V

• Supplied with storage case

• User guide included

$129.00PART NO: 304046

Slide Hammer Diesel Injector Puller Kit Heavy Duty

• Heavy duty universal puller kit suitable for the removal of the most stubborn and difficult diesel injectors

• Suitable for use on Bosch and Delphi diesel injectors

• Supplied in heavy duty storage case

$349.00PART NO: 304042

Diesel Injector Puller Adaptor Set• Universal diesel injector adaptor set

suitable for removing stubborn and difficult injectors

• Applicable for most common rail diesel engines


• 21 piece set


$299.00PART NO: 304042A

Compression Tester KitDiesel Compression Tester Master Kit 1000PSI

• Professional master compression tester kit for diagnosis of compression related problems on diesel engines

• Comprehensive kit includes liquid filled dual scale gauge (1000psi/70bar) with a wide range of glow plug adaptors, dummy injectors and a universal clamp/adaptor set

• Supplied in custom foam tray in blow mould storage case

• Covers most of the Australian car parc

• User guide and application list included

$499.00PART NO: 304600 Funnel for ADBLUE®

Angled Spout 1.1L • Speciality funnel designed for use with AdBlue®

• Screws on directly to filler necks on passenger and light commercial vehicles

• Angled neck suitable for filler necks in cargo area and under bonnet etc

• Features anti spill valve to prevent spillage and over filling

• Equipped with dust cover

Glow Plug Socket SetUniversal Joint 9 Piece

• Universal joint allows the removal of glow plugs in confined areas

• Includes two decarbonising drill bit and puller

• Suitable for 8, 9, 10, 12, 14, 16mm hex glow plugs

$149.00PART NO: 304044

Fuel Return Flow Tester Common Rail Diesel

• Designed to measure the flow from the return side of common rail diesel injectors

• Kit includes measuring blocks with hoses, reduction pipes and adaptors for common rail diesels including Bosch, Delphi, Denso and Siemens injectors

• Measures up to 6 injectors simultaneously

• User manual included

• Supplied in storage case

$265.00PART NO: 307007

Fuel Pressure Tester Kit Injector return flow common rail DIESEL

• Designed for testing the return flow pressure on common rail diesels including Bosch VDO/ Siemens and Delphi systems

• Features a transparent body to check for diesel fuel condition and air pockets



$199.00PART NO: 307004

Transmission Filling System 7.5L

• Convenient and mess free way to fill automatic transmissions

• Suitable for various transmission systems including DSG, steptronic, CVT, dual-clutch automated manual etc

• Includes 18 adaptors to cover the majority of the Australian carparc


$489.00PART NO: 306100

Brake Bleeder & Auto Filler Unit VacuumPneumatic

• Pneumatic vacuum suction simplifies hydraulic brake and clutch fluid changing task to an easy one man operation

• Includes 2 litre auto filler unit

• Supplied with 1 metre silicone hose with rubber nipple adaptor


$249.00PART NO: 305093

Brake Bleeder Pump Kit Vacuum• Multi-purpose kit designed to test and

service a number of automotive system functions including one-man brake bleeding, vacuum testing and pressure testing fuel systems

• Includes various adaptors



• Range: -30 to 60psi (-1 to 4bar)

$149.00PART NO: 310012

Filler/Extraction SyringeADBLUE® 1.5L • Specialty syringe designed for AdBlue®

filling and extraction

• Safe and efficient way to handle AdBlue®

• Suitable for all passenger vehicles, LCV and heavy vehicles etc

• Features large double seal plunger and 410mm suction tube $69.00

PART NO: 305402

$29.00PART NO: 305401

NEW PRODUCT

tool sale


tool saleCompression Tester Kit Petrol 300PSI

• A genuine professional mechanics petrol compression tester supplied in heavy duty

case with foam inlay

• Dual calibrated gauge, stainless steel braided high pressure hose with adaptors

• Sizes: M10, M12, M14, M16

$115.00PART NO: 304175

Brake Caliper PistonWind Back Kit Pneumatic

$199.00PART NO: 310375

Disc Brake & Tyre Depth Gauge• Measure brake disc thickness or tyre tread depth

• Floating jaw enables removal from disc while retaining reading

• Robust aluminium construction

• Range: 0-60mm

$22.50PART NO: 310020

Master BearingRace & SealDrivers• Universal tool for replacing race seat,

bearings and seals

• Simply twist head to adjust jaw size

• Aluminium body with hardened steel striking cap

Part No Size PRICE

321084 9.5-50mm $139.00

321085 18-90mm $149.00

Slide Hammer Hub Puller Combination Heavy Duty• Heavy duty slide hammer combination hub puller suitable for 4 and 5 stud axles

• Includes 10 tonne hydraulic ram and 2.8kg slide hammer


• Diameter 148.5mm, Height 90mm

$499.00PART NO: 269013

Hub Separator SetUniversal

• Universal hub separator set is designed for removing hubs on popular front wheel drive vehicles

• Durable acme forcing and adjusting screws


$299.00PART NO: 245440

Oil Drain Pan 14L

• Suitable for most automotive fluids and chemicals

• Manufactured from durable, high density polyethylene

• 14 litre capacity with easy pour spout

$39.00PART NO: 305382

Clutch Aligning Tool Universal

• Designed to align clutch kits on front wheel drive vehicles

• Includes three locating adaptors

• Manufactured from heavy duty plastic

$18.95PART NO: 306218

Fluid Retaining ToolAutomatic Transmisson 138mm

• Universal tool suitable for most vehicle transmissions and gearboxes

• Prevents fluid spills or leaks during servicing and repairs while the tail shaft is exposed

$4.95PART NO: 306217

Oil Seal Plug Set• Universal five piece stepped design stops the loss

of transmission fluid during service or repair

• Includes Ford side gear centering tool

• Manufactured from high quality chemical resistant plastic

• Overall length: 133mm

• Sizes: 25-54mm $16.95PART NO: 312OOO

Oil SealRemover• Easily removes seals on various applications including automotive, industrial and marine etc

• Includes replacement hook tip and screws

• Overall length: 310mm

$14.95PART NO: 301042

Coolant Filler Funnel Set• Universal funnel for refilling cooling system and assisting in bleeding air

• Fits directly onto filler neck or expansion tank

• Features convenient tap to prevent spilling

• Includes five adaptors to suit most vehicles (31, 35, 40, 42, 45mm)

Radiator Back Flusher

• Flushes cooling systems and heater cores without dismantling

• Simply connects to standard garden hose fittings

• Size: 13mm (1/2”), 16mm (5/8”) and 19mm (3/4”)$49.50PART NO: 308237

Viscous Fan Hub Spanners• Remove and install viscous fan hubs

Part No Size Suits PRICE

308235 32mm Ford 6 cylinder $29.00308236 36mm GM, Ford 8 cylinder $29.00

Cylinder Leak Down Tester Petrol• Used to identify and detect a number of engine faults

including: worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets

• Suitable for 14mm or 18mm spark plug hole


• Working pressure: 35psi

$219.00PART NO: 304012

Valve Spring Compressor On car kit 8 Piece• Universal valve spring compressor eliminates cylinder

head removal when replacing valve stem seals, valve springs and collets

• Adjustable handle and interchangeable adaptors

• Collet sizes: 19–24mm, 19.2–25.5mm, 9.2–26mm, 27.5–33.5mm

$149.50PART NO: 301486

A/C & Fuel Line Disconnect Tool Set• Suitable for disconnecting air

conditioning and fuel lines with quick connect fittings on Chrysler, Ford and GM vehicles

• Size: 3/4”, 5/8”, 1/2” & 3/8”$24.95PART NO: 307222

Exhaust Pipe &Tailpipe Service Kit• Professional exhaust pipe service kit for

expanding, cutting, remove/refit hangers and splitting nuts

• Expander size: 38-64mm & 54-89mm

• Nut splitter: 16-22mm


$249.00PART NO: 321003

Fuel Line Disconnect Tool Set• Designed to disconnect fuel lines

without damaging connectors

• Suitable for Chrysler, Ford, GM and Mitsubishi

• Size: 5/16", 1/4", 3/8"$14.95PART NO: 307002

• Pneumatic operation allows for easy wind back to return brake caliper piston to the resting position during removal, installation or service repairs to the disc brake pads

• Includes various adaptors



$99.50PART NO: 305092

tool sale


tool saleA/C & Fuel Line Disconnect Set • Handy 7 piece set for removing air

conditioning and fuel lines with spring lock coupling fittings

• Sizes: 1/4” (6mm), 5/16” (8mm), 3/8” (10mm), 1/2” (12mm), 5/8” (16mm), 3/4” (20mm), 7/8” (22mm)

$14.95PART NO: 301060

Fuel & Vacuum Pump Pressure Tester • Suitable for testing mechanical fuel pumps

and vacuum systems

• Extra long heavy duty 750mm rubber hose and adaptors included

• Vacuum: 0–30 Hg (0–70 cmHg)

• Pressure: 0–14.7 PSI (0–1.1 kg/cm2)

• Supplied in storage case$59.95PART NO: 307233

Noid Light & IAC Test Set • For testing electronic fuel injection (EFI) systems and

idle air control signals

• Bright LED flashes when injection pulse is detected

• Universal applications including Bosch PFI, Bosch 2, GM TBI, GM Multitech, GM PFI, GM SCPI

and GM square 4 pin, GM Flat 4 pin

$69.00PART NO: 307226

Oil Measuring Container Clip Lid 5L • Handy oil container features detachable flexible

spout for easy pouting and cover lid

$21.95PART NO: 305264

Mouldable Funnel • Flexible rubber funnel allows you to bend, fold and

mould to create a desired shape

• Size: 370 x 170 x 3mm

$34.95PART NO: 305094

Oil Filter Remover Nylon Strap • Sturdy non-slip nylon strap for spin-on type

filters of up to 150mm(6") in diameter

• 1/2" square drive

• Width: 50mm

$9.95PART NO: 305211

Oil Filter Remover Webbing Strap Wrench • Suitable for removing stubborn spin-on

filters of up to 150mm diameter

• 1/2" square drive

• Width: 50mm

$39.95PART NO: 305073

Oil Filter Remover 3 Jaw • Adjustable 3 jaw oil filter remover suitable for 60-120mm diameter filters

• Includes 1/2" to 3/8" square drive reducer adaptor

$19.95PART NO: 305021

Ball Joint Separator Fork 300mm • Separates ball joints with a strike of a hammer

• 24mm fork opening suitable for passenger vehicles and commercial vehicles

• Manufactured from drop forged steel$14.95PART NO: 311273

Tie Rod Separator Fork 400mm

• Separates ball joints with a strike of a hammer

• 18mm fork opening suitable for passenger vehicles and commercial vehicles

• Manufactured from drop forged steel

Torque Extension Bar Set10 Piece

• 1/2" square drive with colour coding for easy identification and precise torque

• Torque settings: 90, 100, 110, 120, 135, 150, 160, 175, 190, 200Nm

$249.00PART NO: 309500

Tyre Levers• Tyre lever to easily remove and refit tyres on to rims

• Manufactured from hardened and tempered drop forged chrome vanadium steel

Part No Size PRICE

309040 300mm $14.95

309035 600mm $32.95

Tyre Valve Remover & Installer Flexible Head 180o

• Rubber bumper protects rim edge from damage during removal and installation of valve stem

• Suitable for mag, alloy and steel wheels

$19.95PART NO: 309000

Hydraulic Bearing Puller Set • Hydraulic Bearing Puller Set (265000) with FREE

Mechanical Bearing Sepator Puller Set (224000)

• Universal master kit ideal for various applications

• Includes 75-105mm bearing separator

• Manufactured from drop forged high quality steel and heat treated

• Supplied in a blow mould storage case

• Capacity: 10 tonne

• Spread: 180mm

• Reach: 425mm

FREE mechanical bearing separator puller set

Hydraulic Puller SetTwin & Triple Leg 200mm

• Most popular sized hydraulic puller includes the famous Toledo hydraulic 10 tonne ram

• Suitable for all applications in automotive, agriculture, industrial, marine, mining industries, etc.

• Supplied in high grade EVA foam tray suitable for all tool boxes

$209.00PART NO: 265050

NEW PRODUCT

Slide Hammer Puller Set Front & Rear Hub 2.3 Kgs• Multi-purpose design for removal of front and rear hubs, bearing oil seal bushes and flange type axles

• Includes slide hammer with multiple attachments including 2 and 3 jaw internal and external puller, front and rear hub pullers and various accessories

$149.95PART NO: 245300

Slide Hammer Gear/Bearing Puller KitMechanical 1.2Kgs • Includes two 100mm internal triple leg pullers

(15-30mm & 30-80mm) and one 100mm external triple leg puller (15-80mm)

$239.95PART NO: 269000

Pilot Bearing Puller 3 Jaw Mechanical

• Compact internal pilot bearing puller designed to extract flywheel spigot bearings

• Suitable for removing spigot bearings, alternator and pump bearings etc.

• Adjustable support legs with locking screws

• Internal diameter range: 13–45mm

$49.95PART NO: 245464

Sliding Beam Mechanical Puller Master Kit• Reversable twin and triple leg sliding beam puller suitable for external and internal applications

• Spread: 35 - 110mm

• Reach: 260mm

$299.00PART NO: 221007

$499.00PART NO: 265000BP

$14.95PART NO: 311272

tool sale


tool saleSingle Point PressureBeam Puller KitMechanical • Pressure beam provides a superior grip to the

application and extra stability

• Suitable for extra tough pulling jobs where additional strength and stability is required

• Spread: 60 - 100mm

• Reach: 100 - 170mm

$149.00PART NO: 222001 Harmonic Balancer

Master Puller Set • Comprehensive multi-purpose puller set designed for the

removal of harmonic balancers, timing gears and pulleys where access to 2 or 3 tapped holes is available

$37.50PART NO: 254230

Power Steering Pump Pulley Kit • For quick and damage free removal and installation of power steering pump pulleys

• Designed specifically to suit 28 – 35mm pulley hub diameters

• Applications include Ford Falcon FG, Ford C111, Saginaw, Thompson, C2 power steering pumps

Manual Vacuum Dent Puller• Heavy duty and durable suction dent puller with slide hammer to assist in panel reshaping

• Maintains a solid and secure grip without damaging the painted surface of the panel, while the 2.5kg slide hammer eases out the dent

$325.00PART NO: 313028

Trim & Clip Remover Set • Ideal for damage free removal of trim and clips

• Size range: 5-7mm & 6-9mm

• Made in Japan

$19.95PART NO: 313030

$29.95PART NO: 313311

Trim & Clip Remover Set 5 Piece • Special five piece set designed to remove,

manoeuvre and manipulate interior trims without damage

Panel/Slab Carrying SetHeavy Duty 2 Piece

• Suitable for carrying glass, stone slabs, counter tops and other sheet goods of up to 160kgs and 40mm thickness

• Manufactured from heavy duty light weight aluminium


$399.00PART NO: 321107

$49.95PART NO: 321046

Precision Hammer Set Mini Multi-Head 8oz

• Precision hammer set with six interchangeable screw on heads - brass (round & flat) stainless steel, aluminium, rubber and polyurethane

• Ideal for delicate interior and exterior applications

• Handy wedge handle is suitable for use as a trim remover

Prying & SmoothingTool Kit Mini Light Duty

• Suitable for light duty prying of small covers, interior bezels, and key fobs

• Three piece set in vinyl wallet$12.95PART NO: 313313

Stock KnifeSingle Blade with Leather Pouch 110mm

• Handy stock knife supplied with genuine leather pouch

• Clip point blade suitable for automotive and industrial applications

$28.95PART NO: SK4

Pocket KnifeSingle Blade Lock Back

• Compact pocket knife with lock back style mechanism

• Stainless steel drop point blade suitable for various applications

$14.95PART NO: 321301

Stock KnifeTriple Blade 180mm

• Stainless steel triple blade stock knife with wooden handle

• Suitable for various applications

$19.95PART NO: SK3

Outdoor Knife 260mm

• Stainless steel blade supplied with plastic holster

• Suitable for outdoor applications$14.95PART NO: FHK1S

Stock KnifeTwin Blade 160mm

• Double fold out precision cut stainless steel blades suitable for automotive and industrial applications

• Ergonomic wooden handle on stainless steel frame

• Clip point and spey point blades

$19.95PART NO: 2BKZ

Stainless Steel Flexible Metric Rules• Thinner in width and thickness for damage free bending

• Photographically etched markings

• Made in Japan

Part No Length PRICE

321059 1000mm $74.95321060 2000mm $249.95

NEW PRODUCT

Fibreglass Folding Rule Single Sided Metric 2000mm• Divided into 220mm sections connected via a reliable and sturdy fix joint

mechanism which enables extensions of 90° or 180° to firmly lock into place

• Double sided metric graduations

• Manufactured from durable fibreglass

• Made in Switzerland

$14.95PART NO: 321902

Stainless Steel Folding Rule Single Sided Metric 1000mm

• Single sided metric folding rule with graduations on both upper and lower edges with numerical markings in centre only

• Blades are locked into place when straightened via an accurately machined rivet function

• Made in Japan

$49.95PART NO: 1000FM

Precision Measuring Set3 Piece

• Professional stainless steel three piece rule set includes mini square, 150mm rule and taper gauge

• Satin chrome finish with photographically etched markings

• Supplied in custom high grade EVA foam tray

• Made in Japan

$39.95PART NO: 321903

Taper Gauges• Used to measure internal diameters

• Photographically etched markings ensure the greatest precision and accuracy

• Manufactured from stainless steel

• Accuracy: -/+ 0.05mm

• Made in Japan


700A 1-15mm $24.95700B 15-30mm $29.95

Fibreglass Measuring Tape Metric & Imperial 50m

• Reinforced, double coated fibreglass tape with double sided graduations

• Heavy duty fibreglass construction

• Quick rewind function for fast and easy tape retraction

• Double sided graduation markings

• Tape width: 13mm

$29.95PART NO: 322220

Mitre Squares Stainless Steel

• Suitable for use as inner or outside try square, mitre square, horizontal, 45° marking gauge and rule

• Graduated blade with metric and imperial markings

• Stainless steel blade with reinforced plastic handle

• Made in Japan


MS150 150mm $29.95MS250 250mm $34.95

$74.95FROM 700B

700A

$49.95PART NO: 245380

tool sale


tool saleCarpenter’s Square 600 x 400mm • Heavy duty carbon steel frame

with black painted coating

• Durable high visibility easy-read silkscreen printing

• Double side graduations

• Size: 600x400mm$19.95PART NO: 322453

Stainless Steel Mini Squares • Double sided photographically etched markings for ultimate accuracy and precision

• Manufactured from quality stainless steel to the strict standards of all Toledo rules


301958 100 x 50mm $9.95301959 150 x 75mm $11.95321015 300 x 150mm $12.95

Crack Measure Gauge 0.1 - 1.4mm • Designed to check the width of cracks

in concrete walls and foundations

• Small pocket size allows for complete and easy portability

• Built in 80mm rule

• Hardened Japanese stainless steel

• Made in Japan$12.95PART NO: 321066


321068 0.5-7mm $14.95321069 8-15mm $14.95

Measuring Wheel 100mm

• Small and compact unit with telescopic handle extends between 450-950mm

• Easy to read 5 digit counter with 10cm and 1m increments

• Measurement range up to 10,000 metres

• Accuracy: ±1cm per 100cm

Part No Wheel Diameter Range Handle Accuracy PRICE

322551 100mm 10,000mm 450-950mm 1cm per 100cm $59.95

Measuring Wheel Digital 10km

• Large backlit LCD displays metric and imperial measurements

• Heavy duty wheel design allows manoeuvring through rough surfaces

• Supplied in heavy duty nylon bag


Rubber Mallet16oz

• Ideal hammer for applications that require soft blows that will not damage the surface on impact

• Fitted with wooden handle

• Weight:16oz

$9.95PART NO: 321090

Ball Pein Hammer Carbon Fibre Handle 16oz

• Carbon fibre core increases bending when striking by more than 25% over a conventional fibreglass type

• Made from durable alloy steel head

• Weight: 16oz$16.95PART NO: 321051

Mini Pocket Saw220mm

• Handy mini pocket saw suitable for cutting wood, PVC and rubber hoses

• Retractable 90mm hardened alloy steel blade folds into handle

• Overall length: 220mm $9.95PART NO: 321041

Wire Stripper & CutterQuick Action

• Quick-Action stripping tool designed to remove the insulation in one single motion without damaging the wire

• Features zinc alloy die cast stripping head and S45C carbon steel body

• Stripping range: 0.5 – 8mm²

• Cutting range: 10 AWG (6.0mm²) $34.95PART NO: 302040

Elec-Line Box Set 2 Piece

• Insulated screwdriver solution for live electrical work

• Tested up to 1000V for professionals working with dangerous live electrical applications

• Made in Japan

$14.95PART NO: 321990

Armature Bearing Pullers• Suitable for removing gears and bearings in automotive and

industrial applications

• Made from durable drop forged chrome vanadium steel

• Supplied in custom moulded EVA foam tray

Part No Capacity Reach Size Range PRICE

226100 1 Tonne 50mm 19-35mm $29.95226101 1.3 Tonne 100mm 24-55mm $32.95226102 1.8 Tonne 160mm 35-80mm $79.95

Leather Punch Plier• Suitable for hole punching leather, plastic and fabrics

• Revolving head with 6 different sizes

• Punch sizes: 2, 2.5, 3, 3.5, 4, 4.5mm

$12.95PART NO: 321104

Plastic Dolly Set12 Piece

• Plastic dolly set suitable for aluminium form work

• Cushions impact for less metal stretch and paint damage

• Manufactured from Polyoxymethylene

• 12 piece set supplied in storage case

321261

321262

Security Spring Hooks• Used to secure tools when working with heights

• Prevents injury and downtime as a result of falling tools

• Coil spring style stainless steel wire with PU coating

Part No Load Range PRICE

321261 1 kg 430 - 1400mm $13.95321262 3 kg 600 - 1800mm $14.95

$249.95PART NO: 313090

$29.95PART NO: 302039

• Specially created file set to cater for automotive use

• Includes 2nd cut round, half round, square and bastard cut flat

Auto File Set 4 Piece

$49.95PART NO: TFR250B

Universal Press Support Tool • Universal Press Support Tool (311021) with BONUS Universal Spanner Extender (321045)

• For safe and easy shop press work, including mounting and demounting jobs

• Infinitely adjustable to suit a myriad of objects and applications e.g. wheel hub bearings

• Creates three contact points for maximum stability and security, without any swivelling

• Features press plate 200 x 240 x 40mm, swivel plate for complete versatility and adjustable anvil bolts

• Made in Germany

FREE universal spanner extender 340mm


$199.95PART NO: 322552

Radius Scale • Unique pocket size precision tool designed to measure

the radius and diameter of objects

• Centre cut out to measure diameter, side cuts to measure radius

• Manufactured from hardened Japanese stainless steel

• Made in Japan

Wire Stripper & Cutter Rapid Action

• Handy tool designed to strip wires fast and efficiently

• Features a self-adjusting hardened steel stripping blade that automatically selects the proper position

• Narrow reinforced fibreglass and nylon construction ensures long service life and easy access into confined spaces

• Lightweight and ergonomic design makes for easy stripping and cutting work

• Strips 10 to 24 AWG (0.2 to 6mm²) stranded or solid insulated wire

• Cuts up top 14 AWG (2mm²) solid or stranded wire

tool sale


tool saleRight Angle Drill Attachment• Right Angle Drill Attachment (321921) with

BONUS Tape Measure (321922)

• Suitable for use with cordless or corded drills

• 90° head allows to access confined space

• Provides up to 49Nm of torque

• Includes PH1 and PH2 bits

FREE TAPE MEASURE Metric 2m Single Sided


Fuel PressureTester Kit Master Fuel Injection• Fuel Pressure Tester Kit (307300) with FREE AC/Fuel Line Disconnect Tool Set (307010)

• Comprehensive kit suitable for testing fuel delivery pressure from 0-100psi on both mechanical and electronic fuel injection systems

• Includes assorted range of hoses, banjo bolts, hose barb fittings and unions necessary to adapt to early and later model vehicles




free ac/fuel line disconnect tool set Master Set

CombustionGas Leakage Test Kit• Diagnose cylinder head and gasket leaks by detecting the presence of combustion gases in the cooling system universal cone adaptor suitable for most vehicles

• Includes 250ml detector fluid



$149.95PART NO: 304000

Replacement Detector Fluid 250ml

$39.95PART NO: 304000A

Universal Bearings and Bush/Press & Pull Sleeve Kit• Universal tool set for extracting and drawing in bushes, bearings, seals etc

• Fully universal applications for Car, LCV & HGV

• Inside diameter range: 34-80mm

• Outside diameter range: 44-90mm

• Threaded rods: M10, M12, M14, M16, M18

$499.95PART NO: 311020

Plier & Cutter Set 4 Piece

• Professional trade quality plier set includes combination, diagonal cutter, long nose and multi-grip pliers

• Manufactured from chrome molybdenum with black phosphate finish

• Supplied in high grade EVA foam tray

$99.95PART NO: TPSA01

Plier & Cutter Set In reusable Tool Roll 4 Piece

• Professional trade quality plier set includes combination, diagonal cutter, long nose and multi-grip pliers

• Manufactured from chrome molybdenum with black phosphate finish

• Supplied in heavy duty tool roll


Long Nose Plier Set Extra Long 3 Piece• Premium trade quality set features three

different tip styles including straight, 45° bent and 90° bent

• Manufactured from chrome molybdenum with PVC dipped handles

• Supplied in high grade EVA foam tray

• Overall lengths: 280mm


Circlip Plier Tool Roll 4 Piece

• Four piece set includes external and internal straight circlip pliers

• Supplied in heavy duty tool roll

• External Straight Tip 130mm (5")

• External Straight Tip 230mm (9")

• Internal Straight Tip 130mm (5")

• Internal Straight Tip 230mm (9")

$84.95PART NO: TCPR01

D-Sub Deutsch 4 Way Indent Crimpers• Crimps round barrel contacts, pins or sockets

• Built in locator ensures accurate positioning of the pin and socket prior to crimping

• Adjustable pin height locator

Part No Type

321024 AWG 26-20, MM2, 0.14-0.5, RS232 D-SUB 35-465

321025 AWG 20-12 MM2 0.5-4.0 Deutsch 16 Pin contact

Precision Angle Cutter Heavy Duty • Heavy duty precision cutter suitable for straight and angular cutting

• Features protractor able to cut 0-135°

• Includes 3 spare blades in holder

$9.95PART NO: 321026

• For steering column ignition lock release

• A must have tool for any work shop carrying out BMW work

• Suits: BMW: E31 E32 E34 E36 E38 E39 E46 E60 E61 E63 E64 E83 E85 Z3, MINI: R50 R52 R53

Ignition Lock Release Specialty ToolBMW & Mini

$2.95PART NO: 302030

Electrical Mini End Cutter 125mm • Hardened precision cutting edges

for cutting and twisting soft wire

• Commonly used in fine electrical and electronics applications

• Manufactured from high carbon steel for superior strength and durability

$9.95PART NO: 302041

Electrical Mini Bent Nose Plier150mm • Mini bent long nose plier specifically for small and delicate electrical work

• Suitable for work in confined spaces

• Manufactured from high carbon steel

$9.95PART NO: 302042

Cable Cutter & Stripper• Curve blade design suitable for cutting up to 11mm

• Features additional SK5 carbon steel stripping knife in handle with adjusting knob design for longitudinal stripping

$29.95PART NO: 302035 Tape Measure

10m Metric Double Sided Auto Lock

• Strong and robust design with ABS and TPE shock-proof casing

• Double sided metric graduations

• Automatic blade lock function provides easy set-up allowing one person operation

• Ergonomic design with belt clip and hanging tether

$14.95PART NO: 321910

$39.95EACH

• Replacement fluid for combustion gas leakage test kit (304000)

tool sale


tool saleMeasuring Tape Steel30m Single Sided Metric

• Heavy duty design with ABS and TPE shock-proof casing

• Single sided metric graduations

• 30m nylon coated blade features a fold out hook and D ring anchor

• Belt clip for easy transportation and storage

$24.95PART NO: 322018Level Line

20m

• Includes two line levels with pocket clips and 20 metre line

• Lightweight levels eliminates sag

• V-groove for pipe work

$6.95PART NO: 322455

Multi Grip Plier 30mm

• Push lock button for 32 positions of adjustment

• Deep hardened teeth with gripping zones suitable for flat, round and obscure shapes

• Manufactured from carbon steel for strength and durability

$29.95PART NO: 301999

Extension Bars• Extensions with unique male end offer 15° of adjustment for the attachment

• Spring loaded ball bearing holds attachment securely

Part No Sq. Dr Lengths PRICE

321044 1/4” 50, 75, 150, 250 and 450mm $29.95

301938 3/8” 45, 75, 150, 250 and 450mm $37.95

301937 1/2” 50, 125, 250 and 500mm $39.95

Automatic Self Grip Puller Twin & Triple Leg 7”

• Unique quick change head design allows for 2 or 3 jaw external or internal pulling work

• Supplied in custom moulded high grade EVA foam tray for safe and secure storage

• Spread: 76-178mm

• Reach: 135mm

$149.95PART NO: 225070

Air Blow Guns• Handy and reliable units for air cleaning work areas and equipment etc.

• Provides maximum air output with minimal noise

321103

Part No Description Nozzle Length PRICE

321102 High Flow Adjustable 60mm $12.95

321103 High Flow Rubber Tip 120mm $12.95

Body Repair Kit Hydraulic 10 Tonne

• Heavy duty professional kit features 15 different quick connect hydraulic attachments for body and frame work

• Supplied with 10 tonne hydraulic ram and extension tubes

• Comprehensive multi-purpose kit makes light work of straightening, bending, pressing or spreading steel

• Supplied in heavy duty blow mould case with castor wheels for easy portability

$599.00PART NO: 313029

Split Collet Extractor 9 Piece • Extract components quickly and efficiently when conventional pullers cannot be used

• Removes bearings, oil seals etc. without damaging housing

• Collet size range: Ø 8-23mm

$249.00PART NO: 246300

Wheel Wrench Universal Extension 1/2” Sq. Dr 3 Piece

• Telescopic 1/2" square drive wrench extends to 530mm (21") for extra leverage

• Includes two reversble sockets

• Socket size: 17 & 19, 21 & 23mm

$24.95PART NO: 309248

Slide Hammer PullerSet Front & Rear Hub 2.3 Kgs

• Multi-purpose design for removal of front and rear hubs, bearing oil seal bushes and flange type axles

• Includes slide hammer with multiple attachments including 2 and 3 jaw internal and external puller, front and rear hub pullers and various accessories

• Slide hammer: 2.3Kgs

$149.95PART NO: 245300

Oil Filter Cup Wrench Set 15 Piece

• Professional oil filter cup wrench set suitable for passenger and light commercial vehicles

• Includes 1/2" to 3/8" reducer adaptor

• Various sizes ranges from 65-100mm

$99.95PART NO: 305004

Wheel Nut Socket Set Long Metric 3 Piece

• Three piece 150mm long wheel nut socket set features nylon sleeve to prevent scratching

• Colour coded 1/2" square drive includes 17, 19 & 21mm


$79.00PART NO: 309032

Key Set T-Handle• T-handle style suitable for automotive and

industrial applications

• Manufactured from heat treated chrome vanadium steel

• Supplied in protective zip wallet

• Available in Hex and Torx sets

$59.95EACH

Part No Type Size

301987 Hex 2, 2.5, 3, 3.5, 4, 4.5, 5, 6 (mm)

301988 Torx T10, T15, T20, T25, T27, T30, T40

Nut Cracker Bar1/2” Sq. Drive 410mm

• Designed for removing seized and stubborn nuts and bolts

• Heavy duty "Strike-thru" head

• Ergonomic rubber handle provides comfort and firm grip

$129.95PART NO: 321032

Aviation Snips• Serrated cutting blades are heat treated for easy cutting, superior strength, toughness and durability

• Cuts up to 1.2mm cold rolled steel or 0.7mm AISI-304 stainless steel

• Manufactured from chromium molybdenum steel

$14.95EACH

Nut Driver SetMetric Hex 9 Piece

• Features ergonomic plastic handles with slip resistant inserts to allow greater torque

• Manufactured from chrome vanadium steel with chrome plated finish

• Size: 4, 5, 5.5, 7, 8, 9, 10, 11, 12mm

$49.95PART NO: 321007

Part No Description Overall Length

301120 Left Cut (Red) 250mm (10”)

301121 Straight Cut (Yellow) 250mm (10”)

301122 Right Cut (Green) 250mm (10”)

tool sale


tool saleBluetooth®

Battery Monitor

$49.95PART NO: MA98412

• Real-time battery monitoring on your smart device

• Stores historical data

• Alerts sent to mobile device

• Tests vehicle starting system

12V Battery Charger and Power Supply• 12V, 30Amp professional battery charger

• 50Amp, variable voltage power supply

• 240VAC input

$899.00PART NO: AE5000PS

6/12/24V Infinite Charger• Infinite Charger (IR61224) with FREE Dash

Camera Recorder

• 6V, 12V and 24V charging

• Up to 20Amp @ 12V, up to 10Amp @ 24V

• 240VAC input


10 AMPSmart Charger• 12V, 10Amp battery charger

• 13.6V, 10Amp continuous power supply

• IP65 water-proof rating

• Suits lead-acid and Lithium batteries

$249.00PART NO: AE1000E

5.0 AMP Smart Charger• 12V, 5Amp battery charger

• IP65 water-proof rating

• Suits lead-acid batteries

$99.00PART NO: AE500E

INCLUDES

BATTERY TESTIN

G

Digital Battery& System Tester With Printer• Digital Battery and System Tester

(BT521) with FREE BT Wireless Speaker

• 6V & 12V professional battery testing

• 12V & 24V starting and charging system (alternator) testing

• Inbuilt printer

• Suits most lead-acid battery types, including Stop-Start

FREE WIRELESSBT SPEAKER


Digital Battery & System Tester• 12V pocket battery tester

• Suits most lead-acid battery types including Stop-Start

• Tests vehicle starting and charging system (alternator)

INCLUDES

BATTERY TESTIN

G$109.00PART NO: BT282

Battery/System TesterWith Printer • 6V & 12V professional battery testing

• Bluetooth connection to smart devices to send digital results

• 12V & 24V starting and charging system (alternator) testing

• Tests internal resistance (milli-Ohms)

• Inbuilt printer with customisable fields

• Suits most lead-acid battery types, including Stop-Start

$849.00PART NO: BT2100

Roadside Assist Jump Pack 12/24V 3800 AMP

• 12V & 24V professional jump starter

• 1000CCA @ 12V & 500CCA @ 24V

• Heavy duty case

$799.00PART NO: RA3800

REVERSE POLARITY

ALAR M

Roadside Assist Jump Pack 12V 1900 AMP

• 12V professional jump starter

• 500CCA @ 12V

• Heavy duty case

$499.00PART NO: RA1900

REVERSE POLARITY

ALAR M

Jumper Leads Antizap 50mm2 4 metre • 4 meter, 900 Amp professional jump leads

• Surge protected

• Reverse polarity alarm

$179.00PART NO: MA504AZ

REVERSE POLARITY

ALAR M

12V/24V Antizap Service Minder• 12V & 24V surge protection device

• Protects vehicle electronics when changing batteries or welding

$49.00PART NO: MA20121224

REVERSE POLARITY

ALAR M

Battery Master Switch• Master isolation On/Off switch

• 250 Amp continuous at 12V

$19.00PART NO: MA98400

4 Position Battery Master Switch• Master isolation On/Off or battery selector switch

• 250 Amp continuous @ 12V

• 4 positions: Off - Battery 1 - Battery2 - Both

$19.95PART NO: MA98401

Jumper Lead Antizap Upgrade• Surge protection upgrade for normal jump leads

• Suits cable OD 10mm to 14.5mm

$39.00PART NO: MA98304

BatteryHold Down Clamps• Plastic hold down clamp with metal bolts and brass wing nuts

Part No Size Battery Width Bolt Length PRICE

MA98100 Small 5” / 127mm 8.5” / 215mm $5.90

MA98101 Large 7” / 175mm 9” / 230mm $5.90

Battery Carrier• Solid fibre handle and metal scissor grip

ensure battery is carried securely• Easy to use • Fits most batteries• Maximum battery width – 170mm

$18.50PART NO: MA2501

MA98100 MA98101

FREE DASH CAMERA RECORDER• Screen Size: 2.4” display• Function: Motion detection, loop video• External Memory: Up to 32GB TF card• Video Resolution: 1280 x 720px

Part No: IR61224

tool sale


tool sale

Bush Drive Set Metric 17 Piece

• Designed for removal and replacement of bearings and oil seals

• Features tapered cone bearing and seal driver tools, manufactured from aluminium for damage free bearing and oil seal replacement

• Includes 3 drive handles and 14 bush adaptors from 10-42mm

Universal Joint T-Handle Set6 Piece

• Long reach T-handles with universal joint drive ideal for accessing confined fasteners

• Sliding beam handle can be set in three positions for added leverage

COMBO PACK

GREAT VALUE!

Sq. Drive Length

1/2 Sq. Dr 500mm

3/8 Sq. Dr 420mm

1/4 Sq. Dr 375mm$99.95

PART NO: BSBP007

Chain Service Kit

Part No Description

BS3500 Chain Extractor

BS1164 Drive Chain Tensioner

BS35101 Chain Breaking & Riveting Master Kit

$164.95PART NO: BSBP008

• Sizes: 6, 8, 10, 12, 13, 14, 17, 19mm• With speed ring adaptors

T-Handle Socket Wrench Set8 Piece 300mm $79.99

PART NO: BSBP004

Multi Driver Spanner Set 8 Piece

• Sizes: 6, 8, 10, 12, 13, 14, 17, 19mm

$39.99PART NO: BSBP005

COMBO PACK

COMBO PACK

• Specifically designed for the replacement fork seals and dust covers

• Manufactured from Glass-Filled Nylon to avoid damaging the fork surface

• Unique design with spring loaded fingers that lock securely around the fork plunger

• Suitable for fork diameters of Ø27mm ~ Ø50mm

• Quick and easy to use

Fork Seal Driver Universal

NEW PRODUCT

$219.95PART NO: BSD00356

NEW PRODUCT

$142.95PART NO: BSB02300

SteeringHead Bearing Installer Kit• Vital tool with improved design to correctly install steering head bearings

• Features new quick acting nut, conical plate and tapered step ring for fast and accurate use

• Suits: bearing diameter sizes: 41-55mm

• With innovative locking mechanism.

• Consists of fork spring compressor and damper rod holding plate.

• Applicable size: 10, 12, 14mm

• Essential tool for servicing or changing springs in upside down forks.

Fork SpringCompressor

NEW PRODUCT

$98.95PART NO: BSD00355

NEW PRODUCT $43.95PART NO: BSD09894

NEW PRODUCTWheel Nut Socket 1/2” Sq. Dr DUCATI

• Dual size alloy wheel nut socket for front and rear axles

• Prevents damage to locknuts and wheel spindle threads

• Manufactured from high quality SCM440 Alloy Steel

• Can be used with air tools or power tools• Application: Superbike 1098, 1198, 1199 Panigale,

Streetfighter 1098, Multistrada 1200 and Diavel Carbon

$75.95PART NO: BSE05551

Wheel Nut Socket 1/2” Sq. Dr DUCATI

$67.95PART NO: BS5551

Crankcase Separator Tool Set• Simple and effective puller set to suit most two and four stroke engines that have a vertically split crankcase

• Adjustable puller legs allow for a multitude of bolt patterns

• Spread: 50-240mm

Bearing Packer• Simple and effective bearing packer

• Enclosed casing so grease stays in the tool cavity, not on your hands

• Clear casing allowing visual inspection

• Simple hand operation

• Suits: Bearings up to 89mm (3 1/2”)$39.95PART NO: BS4326

Thin Wall Spark Plug Sockets

Tappet Adjusting Tool Set 6 piece.

• Three sockets and three adjusters which are interchangeable to allow nine different combinations

• Hollow socket design provides access for adjuster making tappet adjustment an easy single operation

• For most motorcycles and ATVs with screw-type tappet adjustments

• Extra thin wall deep socket designed to access narrow spark plug holes found on many motorcycles

• Hardened chrome vanadium steel with inbuilt rubber insert to hold plug during installation

Part No Sq. Drive Size PRICE

BS9132 3/8” Sq. Dr Hex Drive 14mm $13.00



$54.95PART NO: BS2201

Valve Spring Compressor Kit6 piece• For removal and servicing of engine

valves and seals upon cylinder head or engine repair

• Supplied with 3 interchangeable adaptors of most common sizes

• Suitable for small and large motorcycles$81.95PART NO: BS9947

Fork Oil Level Gauge 60ml Capacity• Tool for checking and adjusting the oil level on conventional and single chamber cartridge forks

• Graduated steel tube with adjustable level setting ring measures oil level from 0-300mm in 5mm increments

$25.95PART NO: BS41500$78.95

PART NO: BS9144

Personal Tool Pack 26 Piece

• Contains 1/4” Sq. Dr. ratchet and a selection of multi driver sockets and drive bits

• Fits metric and SAE 6 point, 12 point, TX-Star, Square, 30% round off, Spline and Ribe nuts

$61.95PART NO: BS9728

C-Hook Wrenches• Specially designed for use with slotted retaining rings

• Thin hook can access confined areas in motorcycle steering and suspension (4mm thickness)


BS0350 19 - 51mm $20.99

BS0351 32 - 76mm $29.49

BS0352 51 - 120mm $42.99

BS0353 118 - 158mm $44.95

CLEARANCE

Steering Tube BearingInstaller Tool• Ideal solution to reduce risk of damaging components

• Adaptor sizes: 24, 26, 27, 28, 30mm

$112.95PART NO: BS9893

Valve Core Torque Tool• Ensures accurate torquing

of tyre valves reducing the potential for leakage

• Solid plastic grip handle

• Pre-set to 4 in.lbs

$24.25PART NO: BS3949

• Extension Rod for BS9893 Steering Tube Bearing Installer Kit

• Extends reach of BS9893 tool in applications with longer steering head assembly’s

• Used in Vespa applications

Steering Tube Bearing Installer Tool Extension Rod 500mm

NEW PRODUCT $269.95

PART NO: BSD98940

• Dual size alloy wheel nut socket for front and rear axles

• Prevents damage to locknuts and wheel spindle threads due to over tightening

• Manufactured from high quality Aluminium

• NOTE - NOT for use with air tools or power tools• Application: Superbike 1098, 1198, 1199 Panigale, Streetfighter 1098, Multistrada 1200 and Diavel Carbon

tool sale


tool sale$679.00

PART NO: 300420

• For tracking and tracing short and open circuits, broken wires and current leaks on any electrical circuit with voltages from 6 to 42 volt DC.

• Suitable on all kinds of circuits with voltages between 6 and 42 volt DC, such as those found in cars, HGV’s, buses, trailers, tractors, boats, etc.

• Internally protected against power surges and overloads

Electrical Fault Finder Kit

• An invaluable tool for performing general auto electric tasks and troubleshooting problems with ignition, fuel injection and body electrics

• Small and ergonomic profile makes handling and operation convenient

• Supplied with quality test leads, temperature probe and alligator clips in a handy carry case

• Enables measurement of engine RPM, ignition dwell angle and temperature and performs electrical checks such as voltage drop, continuity and resistance

Professional Automotive Digital Multimeter

$295.00PART NO: 300500

Oxygen (Lambda) Sensor Socket Set 7 Piece• For fast and efficient removal of a variety of oxygen (lambda) sensors

• Sockets have recesses/windows to allow for sensor cables

• Manufactured from chrome vanadium/molybdenum with chemical black finish

$159.00PART NO: 016900

Hook, Pick & Scraper Set 9 Piece

• Includes multi-purpose scraper, ideal for gasket scraping

• Contains eight hooks and picks, ideal for the fitting and removal of seals, O rings, bushes, springs, cotter pins and fuses

$75.00PART NO: 660887

Air Operated Caliper Piston Wind Back Tool Kit• Handheld pneumatic ram allows for easy wind back of brake caliper pistons

• Air operated ram applies pressure to the caliper piston, the handle is rotated by hand

• Reversible – works on both RH and LH applications

• Applications inc; General Motors, Ford, Mazda, Hyundai, Volkswagen, Renault, Audi, Peugeot, plus many more

$295.00PART NO: 036140

$349.00PART NO: 094003

Multi Puller Pack• Makes 5 different mechanical puller/separator combinations

• Consists of a thin jaw puller (ideal where there is limited clearance), reversible leg puller and separator

• Highest quality, ideal combination for light applications

• Puller reach: 89mm, Spread: 0 - 140mm/External Spread - 155mm

• Made in England

Hydraulic Puller & Separator Kit150mm

• Ideal for automotive and industrial applications including gear pulling and bearing extraction

• Powered by the 1500 series hydraulic ram, applies 8 tonnes of force with ease

• Makes 4 different twin/triple leg pullers, plus bearing separator kit

• Spread: 50-150mm/ Reach: 150mm

• External Spread: 20-105mm/

• External Reach: 876mm

• Supplied in metal case

• Made in England

Hydraulic Combination Standard & Thin Jaw Puller Kit• Ideal for the quick and safe removal of gears, races, bearings, pulleys and sprockets

• Makes 8 different hydraulic pullers standard and thin jaw for limited clearance

• Powered by the 1500 series hydraulic ram, applies 8 tonnes of force with ease

• Spread: 50-225mm/ Reach: 225mm/ Ram: 50 & 100mm

• Supplied in metal case

• Made in England

$1350.00PART NO: 155054

Motorq Professional DigitalTorque Wrench• Motorq Professional Digital Torque Wrench with FREE Model Cooper S Mini

• Up to 12 different units of torque on a clear digital OLED display

• Rechargeable lithium battery via the USB charging port (charging lead included)

• Push/pull torque adjustment knob that allows for rapid and accurate torque settings

• Unique Timestrip® feature indicates when the torque wrench is due f or re-calibration

• Push-thru ratchet head operates both clockwise and anti-clockwise

• Supplied in a protective case with UKAS accredited calibration certificate

• Made in England

Part No Sq. Dr Nm Lbf. ft Ratchet Teeth Length PRICE

830050 3/8” 10 - 50 7.5 - 37.5 72 340mm $649.00

830101 1/2” 20 - 100 15 - 75 72 392mm $649.00

830200 1/2” 40 - 200 30 - 150 72 474mm $699.00

830300 1/2” 60 - 300 45 - 220 60 598mm $759.00

830340 1/2” 60 - 340 45 - 250 60 690mm $839.00

$649.00PRICES FROMfree model

cooper s mini FREE with each Torque Wrench

• CV Joint Puller (080900) with FREE Ball Joint Separator (660490)

• Specialist tool for the removal of CV Joints on front wheel drive cars

• Avoids the need to remove the entire front axle

• No need to use a hammer – reduces risk of damage to the drive axle

• Fast and efficient operation allowing use of impact wrench

• Approved as a special tool by VW Group - Audi, Seat, Skoda, VW – Ref: T20181

CV Joint Puller Part No: 080900

$159.00PART NO: SBP022

free BALL JOINT SEPARATORfork type

Digital Tyre Tread Depth Gauge• Pocket-sized tread depth gauge

• Hardened and tempered stainless steel gauge with large LCD display

• Metric or imperial read-out including zero setting

• Range: 0-25mm / 0-1”$64.95PART NO: 076500

Flaremaster 2 Mild & Stainless Steel

• Unique, original patented design for producing high quality pipe flares on the vehicle

• Fast-turn, coarse thread on hydraulic ram for quick assembly

• Locking bolt with swivel pin for fast tightening

• Enhanced bridge unit for greater strength

• Suitable for brake pipe sizes: SAE Single and Double Flares – 3/16” and 4.75mm, DIN Single Flares – 4.75mm

$399.00PART NO: 027297

Battery & Coolant Testing Set 2 Piece

CONTENTS

Part No Description Temp Range

032002 Anti-Freeze Hydrometer - Polypropylene Glycol -5ºC to -40ºC

032005 Battery Acid Hydrometer -$74.95

PART NO: SBP024

• 1:43 scale Biante Die cast model Mini Cooper S• First Mini to win the 1965 Rally Monte Carlo

$799.00PART NO: 155200

tool sale


tool saleMADE IN GERMANY

86 03 400

Plier Wrenches• Replaces the need for sets of metric and imperial spanners

• Smooth jaws for damage free installation of plated fittings - working directly on chrome!

• Also excellent for gripping, holding, pressing and bending workpieces.

• Push the button for adjustment on the workpiece

Part No.Adjustment

PositionsCapacities Length PRICE

86 03 125 11 23mm 125mm $119.0086 03 150 14 27mm 150mm $129.0086 03 180 13 35mm 180mm $139.0086 03 250 17 46mm 250mm $159.0086 03 300 22 60mm 300mm $189.0086 03 400 25 85mm 400mm $329.00

Combination Pliers• Versatile, with gripping zones for flat and round material

• With cutting edges for soft and hard wire

• Long cutting edges for thicker cables

03 02 200

03 01 200

73 71 180

73 72 180

73 72 180F

TwinForce®

• The superior High-Leverage Diagonal Cutter with patented double joint

• Reliably cuts all types of wire, including steel tape

• For comfortable cutting, repetitive cutting or extremely hard cutting jobs

• *7372180F with opening spring for repetitive cutting

Part No HandlesCapacities Ø mm

Length PRICESoft Medium Hard Piano

73 71 180 Plastic Coated

5.5 4.6 3.2 3.0 180mm $149.00

73 72 180 MultiComponent

5.5 4.6 3.2 3.0 180mm $159.00

73 72 180F*Multi

Component5.5 4.6 3.2 3.0 180mm $169.00

Spring Hose Clamp Pliers• Rotatable, universal grip inserts for reliably

gripping the clamps in all positions

• Extremely good leverage, allows clamps to be opened easily

• Slim head design- narrow head width, ideal tool, especially in confined areas

Part No Adjustment Positions Capacities Length PRICE85 51 180A 18 Max. 70mm 180mm $149.0085 51 250A 25 Max. 80mm 250mm $159.00

High Leverage Flush Cutter• For flush cutting of soft materials eg plastic, aluminium, copper, lead

• Almost bevel free precision cutting edge

• Space for hands due to 20° angled head

Part No Soft Wire Ø mm Length

72 62 200 6 200mm

9852

9856

98 55

Insulated KnivesPart No Description Length PRICE

98 52 Cable Knife - straight blade, protective cap 185mm $39.00

98 55 Dismantling Knife - fixed hook blade, sickle shaped, guide shoe, protective cap 155mm $92.50

98 56 Cable Knife - straight blade specially sharpened, replaceable, hinged blade guard 185mm $59.00

Slim 1000V Screwdriver Set 6 Piece

• Contains six 1000V slim design insulated screwdrivers

• Slotted: 3 x 100mm, 4 x 100mm, 5.5 x 125mm, 6.5 x 150mm

• Phillips: PH1 x 80mm, PH2 x 100mm

$149.00PART NO: 002012V02

1000V Plier & Screwdriver Set 6 Piece

• Six popular insulated electrician’s tools neatly stored in a high quality, versatile shock-resistant carry case

• Contains combination plier 180mm, diagonal cutter 160mm, long nose plier 200mm and screwdrivers - slotted 100 and 125mm, Phillips 100mm

$289.00PART NO: 0050

• Size: 6.35mm

• Wire Size: 4.0mm

• Qty: 100

FREE BLADE TERMINAL Pack Female


Long Nose Side Cutting PliersTwin Pack• Elastic tips: dimensionally stable even when twisted

• Half-round, long, pointed jaws

PART NO: KBP021

Part No Handles TipCap Ø mm

Length PRICESoft Med

26 11 200 Plastic Coated Straight 3.2 2.2 200mm$119.00

26 21 200 Plastic Coated Bent 3.2 2.2 200mm

Extra Long Nose Plier Twin Pack• Long assembly pliers with wave profile

• For gripping, adjustment and assembly work in hard to reach areas

• Serrated pipe grip to grip round parts

28 81 280 - 45º Tip

PART NO: KBP022

Part No Tip Length PRICE28 71 280 Straight 280mm

$149.0028 81 280 Bent 280mm

$179.00PART NO: 72 62 200

Precision Circlip Plier Twin PackFor Internal Circlips

• With inserted tips for reliable work

• Heavy duty in continuous operation

• Non-slip plastic coating on the handles

PART NO: KBP023

Part No Tip Size of Bore Ø mm Length PRICE48 11 J1 Straight 12 - 25 140mm

$94.9548 21 J11 90° Bent 12 - 25 130mm

TWIN PACK

Precision CirclipPlier Twin Pack For Internal Circlips • With inserted tips for reliable work



• Inserted tips: spring steel wire, drawn

Part No Tip Size of Bore Ø mm Length

48 11 J2 Straight 19 - 60 180mm

48 21 J21 90° Bent 19 - 60 165mm


Part No Tip Size of Shaft Ø mm Length

48 11 A1 Straight 10 - 25 140mm

48 21 A11 90° Bent 10 - 25 130mm

Precision CirclipPlier Twin Pack For External Circlips • With inserted tips for reliable work



• Inserted tips: spring steel wire, drawn $99.95PART NO: KBP028

Precision Circlip PlierTwin Pack For External Circlips • With inserted tips for reliable work


• Large contact faces on the tips: no distortion of circlips, easy fitting

• Internal opening spring, protected and captive

• Inserted tips: spring steel wire, drawn$104.95

PART NO: KBP029

Part No Tip Size of Shaft Ø mm Length

49 11 A2 Straight 19 - 60 180mm

49 21 A21 90° Bent 19 - 60 165mm

TWINPACK

TWINPACK

TWINPACK

Part No HandlesCapacities Ø mm

Length PRICEMedium Hard Copper

03 01 160 Plastic Coated 3.1 2.0 10.0 160mm $37.0003 01 180 Plastic Coated 3.1 2.2 12.0 180mm $40.0003 01 200 Plastic Coated 3.8 2.5 13.0 200mm $46.0003 02 160 Multi-Component 3.1 2.0 10.0 160mm $45.0003 02 180 Multi-Component 3.1 2.2 12.0 180mm $48.0003 02 200 Multi-Component 3.8 2.5 13.0 200mm $54.00

Crimping Pliers • Crimping Pliers (9721215) with FREE Blade Terminal

Pack (TET201-100)

• For cutting cables, stripping wire and crimping insulated and non-insulated terminals, connectors and plug type connectors

• With threaded holes for cutting copper and brass screws threaded M 2.6 / M 3 / M 3.5 / M 4 and M 5

• Bolted joint for higher stability and even movement

TWINPACK

TWINPACK

tool sale


tool salePROFESSIONAL TOOLS

Aluminium Pipe Wrenches• Lightweight construction allows for greater portability

• Floating forged steel jaws for fast ratcheting action

• Wide and smooth teeth are ideal for vinyl coated pipes

• Hook jaw with spring suspension for quick grip and release

• Made in Japan

Part No Length Capacity mm PRICEHITALP250S 250mm 48 $75.00HITALP300S 300mm 60 $80.00HITALP350S 350mm 72 $95.00HITALP450S 450mm 86 $135.00HITALP600S 600mm 105 $180.00HITALP900S 900mm 150 $330.00

Pruning Shear 215mm

• Suitable for all pruning work

• Ideal for vineyards, nurseries and general

• gardening specialists

• Lightweight comfortable aluminium handles, built in lock

• Made in Japan $27.95PART NO: HITMPS11 Long Arm

Hand Riveter• Heavy duty riveter with long arms for additional reach and leverage

• Tempered alloy steel, spring loaded handle

• Suitable for aluminium and steel rivets

• 3 interchangeable nose pieces for 3.2mm 4.0mm and 4.8mm rivets

• Made in Japan

Professional Hand Riveter• Strong durable construction ensures precise riveting

• Spring loaded

• 4 interchangeable nose pieces for 2.4mm 3.2mm 4.0mm and 4.8mm rivets

• Made in Japan

$69.00PART NO: HITHR001


Lazy Tong Hand Riveter• Heavy duty riveter with a lazy tong setting action

• Single pull back design for quick and repetitive operation

• Suitable for aluminium and steel rivets

• 3 interchangeable nose pieces for 3.2mm 4.0mm and 4.8mm rivets

• Made in Japan


• High Tensile Bolt Cutters with FREE Knipex End Cutter Nipper (6801200)

• Short cutting edge to cut through chain links, high tensile bolts, rods and high tensile wire for pre-stressed concrete

• Jaws are made from the special alloy steel developed originally for HIT bolt cutters with the cooperation of steel manufacturers

• Made in Japan

High Tensile Bolt Cutters Red Jaw

Part No Description Length PRICE

HBP003 HITNBC0600H with BONUS End Cutting Nipper 600mm $129.00



FREE KNIPEXend cutter nipper• For twisting and cutting binding wire used in

concrete mesh and steel fixing applications

• The original and the best nippers

• Length: 200mm

• Shear-cut blades designed for cutting soft non-steel copper and aluminium cable

• Performs a clean sharp cut with minimal distortion to the cable

• Not suitable for cutting ACSR, wire rope, steel or self-supporting strand

• Made in Japan

Hand Cable Cutters

Part No Copper IV mm2

Copper WCT mm2 Length PRICE

HITSC10 22 50 160mm $35.00

HITSC20 30 80 210mm $40.00

HITSC30 38 90 240mm $45.00

• Designed for cutting all soft and hard steel cable and wire

• Cuts copper aluminium 6.0mm, wire rope 2.5mm, ACSR 2.4mm

• Compact and lightweight, allows for access into restricted areas

• Made in Japan

Hand Wire Rope Cutter 190mm

$40.00PART NO: HITHWC06

• For cutting wire rope, piano wire, steel wire, ACSR cable and aircraft cable

• Forged lightweight aluminium handles with rubber grips - ideal for overhead work

• Clean sharp cut with minimal distortion to the cable

• Cuts wire rope 9.0mm, piano wire 4.0mm and ACSR cable 6.0mm

• Made in Japan

Heavy Duty Wire Rope Cutter 335mm

$135.00PART NO: HITHWC09

HITPE200

HITPH200

WIRE CUTTER

END CUTTER

HAND CUTTER

• Special heat treated and tempered drop forged alloy steel blades

• Comfortable grip with spring action permitting one hand operation

• Made in Japan

Pocket Cutters

Part No LengthCapacities

PRICEHard Mild Piano

HITPC200 200mm 2.5mm 4mm 2.5mm

$30.00each

HITPE200 200mm 2mm 3.5mm -

HITPH200 200mm 3mm 4mm 2.5mm

HITPC200

Super Heavy Duty Wire Rope Cutter• Drop forged steel head cuts through wire rope with ease

• Ergonomic and comfortable rubber grip

• Made in Japan

Part No Capacity Cutting Load Length PRICEHITWC8ST 8mm2 max 15kg 740mm $310.00HITWC12ST 12mm2 max 39kg 885mm $490.00

• Drop forged heat treated alloy steel blades

• Blades have black phosphate, rust resistant finish

• Shear cut blades provide a clean, smooth and easy cut - excellent for pallets, shipping and metal recycling yards

• Length 600mm, cuts single 51 x 13, double 32 x 12mm

• Made in Japan

Steel Strap Cutter

$169.00PART NO: HITSS600

Part No: HITSC10

Part No: HITSC30

tool sale


tool sale

Hollow Wad Punch Set 9 Piece

• For stamping out or producing gaskets and seal rings from materials such as rubber, leather, felt, plastic, cork, fabric etc

• Dip-coated lacquered finished with laser engraved etching

Taper & Parallel Pin Punch Set 8 Piece

• Set of one taper and seven parallel pin punches in durable fabric wallet

• Contains taper punch 3mm and parallel pin punches 2,3,4,5,6,8 and 10mm

$69.00PART NO: RTP8

MADE IN GERMANY $99.95

PART NO: RBP001

Chisel, Pin & Centre Punch Set8 Piece • Chisel, Pin & Centre Punch Set (REN03) with

FREE Ball Pein Hammer (321051)

• Set of eight chisels and punches in foam tray.

• Tools neatly stored in high quality EVA foam tray.

• Designed to suit most common tool trolleys and work benches.

• In hang sell carton.


Chisel Set6 Piece • Chisel Set (RCFT6) with FREE Screw

Extractor Set

• Set of six chisels in foam tray.

• Tools neatly stored in high quality EVA foam tray.

• Designed to suit most common tool trolleys and work benches.

• In hang sell carton.

FREE screw extractor set Easy Out 3 Piece

70 00 153

70 70 20

Cable Cutting & Stripping Pack 2 Piece

• Handy pack for all cable cutting and stripping applications

• Contains 707 020 Automatic Insulation Stripper and 700 0153 Cable Cutter


$125.00PART NO: 140900

Adjustable CentringPunch Set 3 Piece

• For exact, offset free centring on various applications

• Perfect alignment due to the adjustable sleeve

• Contains sizes 6-8mm, 8-11mm, 11-16 mm

$289.00PART NO: 430143

• Activated by downward pressure (hammer not required) , striking force 20-50 N

• SIZE 1 - for dot marking on steel, NF metal and plastics

• Impact strength is adjusted by rotation of the knurl

• Spring loaded self striking mechanism

• Machine steel with nickle plated finish

Automatic Centre Punch with Guard

$39.95PART NO: 430229 • Suitable for removing clips and

door trim linings on vehicles

• PVC powder coating provides better sliding performance and helps to avoid damage to sensitive surfaces

• Blade thickness 2mm, width 26mm, notch width 7.4mm

Trim & Clip Remover

$18.95PART NO: 449250

• Suitable for removing old seals and gaskets from metal surfaces

• Blade length 150mm, width 25mm

Seal Scraper

$22.95PART NO: 463260

• Each tool fits metric and inch plus worn nuts and bolts

• This 30 piece set equals a 72 piece conventional set

• 10 x combination spanners, 12 x 3/8” sockets, 3/8” drive reversible ratchet handle, 3/8” drive 150mm (6”) extension bar, 3/8” , universal joint, 16mm & 5/8” spark plug set, slotted head screwdriver, Phillips head screwdriver, 150mm combination pliers, 150mm long nose pliers

Tool Set 30 Piece

$269.00PART NO: MET-0825

• Each tool fits metric and inch plus worn nuts and bolts

• Sizes 10mm x 3/8” to 19mm x ¾”

Combination Spanner Set 10 Piece

$70.00PART NO: MET-0110

• Each socket fits metric and inch plus worn nuts and bolts

3/8" Sq. Dr Impact Socket Sets

Part No Description

MET-2300 Standard 3/8” Sq. Dr 11 Piece

MET-2305 Deep Wall 3/8” Sq. Dr 11 Piece

$70.00PART NO: MET-2300

$85.00PART NO: MET-2305



• Sockets 10mm x 3/8” to 32mm x 1 ¼”, quick release reversible ratchet, 250mm (10”) extension bar, flexible handle, universal joint, 3 way adaptor, 21mm & 13/16” spark plug socket, 125mm (5”) extension wobble bar

1/2" Sq. Dr Standard Socket Set

$210.00PART NO: MET-0405

• 9 Piece



• Sizes 9mm x 3/16” to 13mm x ½”

1/4" Sq. Dr Standard Socket Set

$22.00PART NO: MET-0220

1/2" Sq. Dr Standard Socket Set 17 Piece

3/8" Sq. Dr Standard Socket Set 12 Piece

$40.00PART NO: MET-0320


• Accessories: Quick Release Reversible Ratchet, 150mm (6”) Extension Bar, Fingertip Ratchet, Universal Joint

1/4" Sq. Dr Standard & Deep Wall Socket Set

$95.00PART NO: MET-0210

FREE BALL PEIN HAMMER Carbon Fibre Handle 16oz

$99.00PART NO: MET-0420

tool sale


tool sale

3/8" Sq. Dr Impact Socket Sets

Part No: Quantity Colour Qty No. of Packs

CT205RDCD 200 x 4.8mm Red 100 4

CT205YLCD 200 x 4.8mm Yellow 100 4

CT205GRCD 200 x 4.8mm Green 100 4

CT205BLCD 200 x 4.8mm Blue 100 4

CT305RDCD 300 x 4.8mm Red 100 4

CT305YLCD 300 x 4.8mm Yellow 100 4

CT305GRCD 300 x 4.8mm Green 100 4

CT305BLCD 300 x 4.8mm Blue 100 4

TOTAL 32 PACKS

Coloured Cable Tie Bulk Pack

$165.95PART NO: TBP098

• Superior sponge lasts longer and holds ample water to wipe windows without redipping

• 8” wide head, long hardwood double lacquered handle

• Made in Canada

High Quality Heavy Duty Squeegees12” long

Part No Handles Length PRICES808NY Red Handle 12” long

$13.75S808NYG Grey Handle 12” long

Solid Band Hose Clamp PackSMH / SHS Solid Band, Part Stainless Steel

bonus hose clamp nut driver 150mm


82clamps

• Hose Clamp Pack (SBP82) with FREE Hose Clamp Nut Driver (CND-1)

$225.50PART NO: TEC300

Double Ear Clamp Kit• Double Ear Clamp Kit (TEC300) with FREE Pincing Pliers (SCP-1)• A simple and economical clamping solution

BONUS pincing pliers 250mm

300clamps

Hose Clamp Workshop Pack MAH/ HAS Perforated Band, All Stainless

• 150 clamps in a handy carry case• Pack clearly marked with size range• All popular sizes

all stainless

150 cLAMPS

$253.00PART NO: CWP150SS

Hose Clamp Workshop Pack MH/ HS Perforated Band, Part Stainless

• 150 clamps in a handy carry case

• Pack clearly marked with size range• All popular sizes

$162.80PART NO: CWP150

premium quality extensive range we’ve got it covered

P. No Size Range Qty

TEC57 5 - 7mm 30

TEC79 7 - 9mm 30

TEC911 9 - 11mm 30

TEC1113 11 - 13mm 30

TEC1315 13 - 15mm 30

TEC1517 15 - 17mm 30

TEC1518 15 - 18mm 30

TEC1720 17 - 20mm 30

TEC2023 20 - 23mm 30

TEC2325 23 - 25mm 30

SCP-1 Pincing Plier - Top Join

1


SMH004 6 - 16mm 20

SMH006 11 - 22mm 20

SHS010 14 - 27mm 10

SHS012 18 - 32mm 10

SHS016 21 - 38mm 10

SHS024 27 - 51mm 6

SHS028 33 - 57mm 6

Perforated Band Hose Clamp PackMH / HS Perforated Band, Part Stainless Steel

bonus hose clamp nut driver 150mm


• Perforated Hose Clamp Pack (CVP82) with FREE Hose Clamp Nut Driver (CND-1)


MH004 6 - 16mm 20

MH006 11 - 22mm 20

HS010 14 - 27mm 10

HS012 18 - 32mm 10

HS016 21 - 38mm 10

HS020 21mm - 44mm 6

HS024 27mm - 51mm 6

82clamps

Hose Clamp Bonus PackMH / HS Solid BandPart Stainless Steel

• Hose Clamp Bonus Pack with FREE Dash Cam

• Tridon perforated hose clamps are manufactured in Australia to the highest standard

• Easy to install

• Maximum strength

BONUS DASH CAMERA RECORDER• Screen Size: 2.4” display• Function: Motion detection, loop video• External Memory: Up to 32GB TF card• Video Resolution: 1280 x 720px

Part No. Size Range Qty

MH004 6-16mm 30

MH006 11-22mm 20

EFI005 9-17mm 20

HS008 13-25mm 20

HS010 14-27mm 20

HS020 21-44mm 20

HS024 27-51mm 20

Electrical Terminal Packs

Part No Description Colour Qty

TET500-100 Butt Connector Blue 100

TET501-100 Butt Connector Red 100

TET015-50 Ring Terminal 10.5mm Yellow 50

TET014-50 Ring Terminal 8.40mm Yellow 50

$17.50EACH

TET5

00-1

00

TET5

01-1

00

TET0

15-5

0

TET0

14-5

0


CT305BKCD CT154BKCD CT205BKCD

x10

CT254BKCD

x10

x10x10

CTP23CTP27CTP25

Cable Tie Packs

Part No Colour Length Pack Qty PRICE

CTP23 Natural 400mm 200 $6.05

CTP25 Assorted 100 - 200mm 1000 $23.65

CTP27 Black 100 - 200mm 200 $6.05

Cable Tie Packs Black UV Stabilised

Part No Contents Size Qty PRICETBP077 CT154BKCD 4 x 150mm 100pk x 10 $26.95TBP076 CT205BKCD 5 x 200mm 100pk x 10 $25.30TBP075 CT305BKCD 5 x 300mm 100pk x 10 $67.65TBP079 CT254BKCD 4 x 250mm 100pk x 10 $50.60

3200cable ties

part stainless

150 cLAMPS

• Assorted colours and sizes

150clamps

0492-18 Prices valid 1 October to 31 December 2018. Prices include GST. Please refer to the relevant Tridon catalogues for more comprehensive product information. As participating stores are independant businesses, they reserve the right to set their own selling prices. Pricing throughout this publication is the recommended trade price and may vary from store to store. Every effort has been made to ensure stocks are available at the time of printing.

Should any item not be in stock on placement of orders, stores will endeavour to procure those published items. Product images are for illustration purposes only. Produced by Tridon Australia Pty Ltd ACN 001 398 698 ABN 90 001 398 698

1 OCT - 31 DEC 2018 . ONLY WHILE STOCKS LAST . ALL PRICES INCLUDE GST

Brake Caliper Wind Back Kit Universal Adaptors

• Brake Caliper Wind Back Kit (310378) with FREE Brake Bleeder & Fluid Extractor

(310005)

• Universal brake caliper wind back kit applicable for both right and left hand

threaded pistons

• Adjustable adaptors suitable to most vehicles

• Adaptor size range: 22 - 37mm

• Supplied in custom moulded hard case

• Air operated brake bleeder simplifies bleeding of brake and clutch systems in automotive applications

• Capacity: 1L

FREE BRAKE BLEEDER & FLUID EXTRACTOR


Aluminium Straight Edge Rule Single sided Metric

FREE MAGNETIC TORPEDO LEVEL 250mm


• Vernier Caliper (322201) with FREE Magnetic Level (322013)

• Precision vernier caliper suitable for inside and outside measurements in both metric and imperial

• Hardened stainless steel with satin chrome finish

• Supplied in foam tray with wooden storage box

Vernier Caliper Analogue 150mm

FREE MINI MAGNETIC LEVEL 100mm


Stainless Steel Rule Single Sided Metric 1000mm

• Stainless Steel Rule (1000m) with FREE Mini Magnetic Cross Level (322014)

• Graduations on both upper and lower edges with numerical markings in centre only

• Manufactured from high quality stainless steel

• Made in Japan

FREE MINI MAGNETIC CROSS LEVEL


Stainless Steel Rule Double Sided Metric & Imperial 600mm

• Stainless Steel Rule (60024) with FREE Mini Magnetic Bulls-eye Level (322451)

• Metric & Imperial double sided rule with upper and lower graduations

• Made in Japan

FREE MINI MAGNETIC BULLS-EYE LEVEL


Digital Cross Laser Includes tripod

FREE MULTI-SCAN DIGITAL STUD FINDER

• Digital Cross Laser (322055) with FREE Multi-Scan Digital Stud Finder (322054)

• Suitable for all measuring and marking

• Features out of level visual and audible warning and tilt mode for angular

layout/marking

• Accuracy: 0.2mm/m


Magnetic Box Level 1200mm

• Magnetic Box Level (322120) with FREE Aluminium Cutting Rule Metric (322004)• Unique side view vial provides accurate plump reading

• Manufactured from high grade aluminium with epoxy locked shockproof vials

FREE ALUMINIUM CUTTING RULE METRIC1000MM


Coloured Cable Tie Pack 32 Packs • 32 packs of NEW coloured cable ties• 100 cable ties per pack• Sizes: 200 x 4.8mm and 300 x 4.8mm• Colours: Red, yellow, green and blue


VALUEPACK

• Heavy Duty Power Pack Plier Set (002011S) with FREE Universal Shears (95 05 10)

• Includes popular Knipex Cobra (250mm), high leverage combination pliers (200mm) and high leverage diagonal cutters (200mm)

• Great value!

• Made in Germany

Heavy Duty PowerPack Plier Set 3 Piece

FREE KNIPEXUNIVERSAL SHEARS $199.00

PART NO: KBP014

4 for price of 3!

Deep Wall Impact Socket Set 1/2” Drive 15 Piece • Deep Wall Impact Socket Set (MET-2450) with FREE Combination Spanner Set (MET-0107)

• Equals a 42 piece conventional set

• Fits metric, inch and rounded nuts and bolts

FREE COMBINATION SPANNER SET

$220.00PART NO: MBP001

• Straight Edge Rule (SE1000) with FREE Magnetic Torpedo Level (322010)

• Aluminium straight edge rule with upper graduated edge

• Hang hole for easy storage

• Width: 50mm

• Thickness: 5mm

• Length: 1000mm

• Handy magnetic level suitable for minor and major tasks

e: [email protected]: 0421 021 077

Documents

PART NO: MABP015 59 · Injector return flow common rail DIESEL • Designed for testing the return flow pressure on common rail diesels including Bosch VDO/ • Siemens and Delphi