Upload
griffin-wells
View
218
Download
0
Tags:
Embed Size (px)
Citation preview
Part of the BRE Trust
Protecting People, Property and the Planet
‘LPCB Red Book Listed Products and Passive Installer Schemes Answering the needs of the market’
Ian StewartPassive installer scheme managerMarch 2012
Introduction to BRE Global Research, innovation, consultancy, fire testing, certification,
related installers, training.
Working in the built environment, but also
transport, manufacturing, electronics, agriculture…
Our national and international standing
Customers in 38 countries and recognised in 42
World-class facilities and experts
Involved in the development of regulations, codes and standards
Advisors on policy
One-stop shop for testing and certification
Strong links with industry and authoritative bodies
So what is Passive Fire Protection? Passive fire protection is the primary measure integrated
within the constructional fabric of a building to provide inherent fire safety and protection by responding against flame, heat and smoke to maintain the fundamental requirements of building compartmentation, structural stability, fire separation and safe means of escape.
Passive fire protection measures achieve their intended purpose by raising the fire resistance of the structure, protecting the structure against the effects of fire, reducing fire spread through secondary ignition, limiting the movement of flame and smoke, and minimising the danger of fire-induced collapse or structural distortion.
Passive fire protection design, incorporating passive fire protection materials, systems and assemblies, serves by fire containment to protect life, safeguard the building structure, protect assets, maintain building serviceability after fire, minimise rebuild costs, and facilitate quick business recovery and continuity
In simple terms…..?
The ‘fabric’ of the building should be designed, constructed and maintained to reduce or eliminate the spread of fire products around the building.
To contain the fire to the area of origin.
Protect lives and the structure of the building.
Why is passive fire protection so important?
Maintains structural stability of steel frame buildings
Reduces deflection of floors
Maintains compartmentation
Reduces spread of smoke
Maintains escape routes
What happens if it fails?
Potential building collapse
Potential loss of life
Major rebuilding cost
Why Passive installer schemes?
Reduces the risk of loss of life and product failures by ensuring professional installation
Reduces damage caused to property and hence insurance losses should a fire occur
Allows installers to comply with AD-B Vol2
Encourages insurers and building control that fire safety has been given appropriate consideration
Reduced liability
Benefits of Passive installer schemes
Reduces risk for manufacturers, end users, insurers, clients, specifiers, contractors, legislators ………
Differentiation for installers
Inspection of 15% of installations
Installer self certifies his work on LPCB certificates
Encourages maintenance of passive via O&M manuals
Regulatory Reform order
Reduced liability
Create a level playing field for installers
LPCB Passive installer schemesInstaller schemes are available in the form of Loss Prevention Standard (LPS) for the following Passive Fire Protection products :-Fire doors (Maintenance and repair) LPS 1197
Fire shutters (Maintenance and repair) LPS 1197
Smoke barriers (Maintenance and repair) LPS 1197
Fire doors (Installation) LPS 1271
Security doors (Installation) LPS 1271
Fire shutters (Installation) LPS 1271
Smoke barriers (Installation) LPS 1271Compartment wall systems (LPS 1208 tested) LPS 1500Penetration, cavity barriers and linear gaps LPS 1531
Board fire protection LPS 1531
Intumescent coatings LPS 1531
Spray fire protection LPS 1531
Fire rated ductwork LPS 1531
Fire resistant dampers LPS 1531
Fire rated compartment walls LPS 1531
Offsite applied intumescent coatings LPS 1531
LPS 1531 Issue 1.0
Requirements for the LPCB Approval and Listing of companies installing or applying passive fire protection products This standard defines the requirements for companies installing or
applying a generic range of passive fireprotection products.
Companies are audited against the standard.
Non conformities in line with ISO auditing are issued.
A suspension procedure is in place to police the scheme.
LPS 1531
Installer scheme specifically for the installation of
the following passive fire protection products or systems.
Appendix:
1. Penetration, cavity barriers and linear gap seals2. Fire rated board and cladding to structural elements3. Intumescent coatings to structural elements4. Fire rated spray materials5. Fire rated ductwork systems6. Fire resisting dampers7. Fire resistant compartment wall systems 8. Offsite application of intumescent coatings to structural
elements
Fire rated ductwork and dampers
Pre coated fire rated duct system. Fire damper anchored inside drywall.
Summary of LPS 1531 A technical site inspection scheme audited by LPCB inspectors.
Improved standards of passive fire protection product installation.
Each contract is inspected and signed off by a nominated installation company employee.
Installers certify their work with a numbered LPS1531 Certificate of Conformity
Site surveillance inspection by LPCB on up to 15% of installations.
LPS1531 certification can be invaluable in complying with Regulation 38 of the Building Regulations 2011. This regulation requires the installation company to provide fire safety information to the responsible person.
LPS 1197 : Issue 3.0
Requirements for the LPCB Approval and Listing of companies Undertaking the Maintenance and Repair of Doorsets, Shutters and Active Smoke/Fire Barriers
This standard defines the requirements for companies inspecting, maintaining and repairing fire doors, fire shutters and smoke/fire barriers.
Training to service the specific product. Follow minimum service requirements in LPS1197. All doors, firedoorsets, smoke barriers and smoke/fire barriers
shall be inspected and a work programme drawn up. Issue of a Maintenance Certificate.
Summary of LPS1197 A technical inspection, maintenance and repair scheme audited
by LPCB inspectors.
The LPCB approved company can self certify their work against LPS1197.
If the Regulatory Reform (Fire Safety) Order 2005 (RRO) applies then the competent person may use an LPS1197 approved installer to carry out regular maintenance to demonstrate compliance with Paragraph 17 - Maintenance, in the RRO.
Technical issues
1. Gaps around fire doors and fire and smoke doors.
2. Ensure performance criteria are met.
LPS 1271 : Issue 1.0
Requirements for the LPCB Approval and Listing of companies installing fire and security doors and shutters and smoke barriers
This standard defines the requirements for companies installing fire and security doors and shutters and fire/smoke barriers.
Training to install the specific product. Any doorset or shutter shall have a defined security resistance and be
certified or approved by the LPCB or similar certification body. Any doorset or shutter with a defined fire resistance and be certified or
approved by the LPCB or similar certification body. The installer shall be in possession of the latest installation instructions
for the product being installed. Follow recording requirements in LPS1271. Issue Completion Certificate on all contracts.
Summary of LPS1271
A technical installation scheme audited by LPCB inspectors.
The LPCB approved company can self certify their work against LPS1271.
LPS1271 certification can be invaluable in complying with Regulation 38 of the Building Regulations 2011. This regulation requires the installation company to provide fire safety information to the responsible person.
Technical issues
1. Fire sealing around door frames.
2. Ensure performance criteria are met.
BRE Passive inspection service
An independent third party site inspection can:
Provide confidence to all interested parties that the Passive Fire Protection has been installed correctly and in accordance with the manufacturers recommendations.
Confirm that the choice of products is suitable for the application.
Ensure that the workmanship is of a standard that ensures the fire protection will meet the design specification.
Inspection is best carried out at an early stage during installation thus enabling the sub-contractor to have the opportunity to rectify any problems rather than impact on the critical path of the construction.
The Red Books
Products and services approved by us are
listed in the Red Books
• Volume 1 Fire Detection and Alarm products and services. Related installers.
• Volume 2 Passive fire protection products and services. Security protection systems. Related installers. Management systems. Construction products.
• Available on-line at www.redbooklive.com
• CD and hard copy
Simple guides to installing and inspecting passive fire protection
– Good Building Guide GBG 81
– Presents basic information
– Directs the reader to more comprehensive documents