FOR THE 2018-2019 CRUSHING SEASON.

PARTS AND SERVICE

CALL 1-866-464-9072 OR EMAIL CRUSHING@TOROMONT.COMWITH ANY QUESTIONS OR TO REQUEST INFORMATION

MANITOBA • ONTARIO • NEWFOUNDLAND & LABRADOR

Toromont is here to help. With local Metso-trained service experts, with a large inventory of OEM parts and wears, rebuild programs and high-value training events; Toromont is committed to keeping your equipment running at peak performance.

Take advantage of our Winter Works2018 – 2019 parts and service specials designed specifically for your Metso jaw, cone, impact crushing and screening equipment.

For more information and complete offer details, contact your Toromont customer support representative or the nearest Toromont location.

PREPARE YOUR CRUSHING EQUIPMENTFOR THE 2019 SEASON

WINTER IS THE TIME

HP CONEINSPECTION PROGRAM

Disassembly of cone components excluding adjustment ring and countershaft boxAll components cleaned, measured and documentedAll clamping and tramp cylinders inspected for leaks and functionAll accumulators tested for leaks and nitrogen pressure corrected

END OF SEASONINSPECTIONS

INSPECTION PACKAGE INCLUDES:

Plant must be operational at time of inspection. Toromont reserves the right to withdraw or change this offer at any time without notice. Prices reflect Toromont Cats current list price. Offer not valid in conjunction with any other discounts. Travel is not included. Required oils, filters, seals and gaskets are over and above listed price. Lifting equipment outside of Toromont service truck capabilities is to be supplied by customer.

IC or Analog panels inspected and tested for function Air and oil filters replacedHydraulic and cone lubricating oils sampledSystem interlocks and safeties testedPressure relief valves tested and adjusted if neededComprehensive report to be provided

HYDRAULIC SYSTEM INSPECTION:

HP200 CONE INSPECTION

$7,650HP300 CONE INSPECTION

$7,650HP400 CONE INSPECTION

$7,650

HP200, HP300, HP400REBUILD PROGRAM

Ensure your crusher doesn’t retire before you. Rebuild your HP200, HP300 and HP400 this winter and take advantage of discounted labour and reduced parts pricing on parts packages. Countershafts to be inspected in place.

1000 hour or 6 months warranty on all installed components and 6 months on labour.Main frame and seat liners excluded from above pricing.Prices reflect countershaft inspected in place and not removed from structure. Countershaft assembly removed, disassemble and rebuild with new bushings and seals is extra.

*Countershaft removal, standard access included in pricing. Additional sub-structure, frame or cone removal is extra.

Visual and operational inspection if conditions allow Complete disassembly of cone including countershaft box if requested*Measure key components and surfacesReplace all brass/bronze components, excluding main frame seat linersDocument specs for installed componentsInspect, clean and test hydraulic lube system as described on the inspection pageReassemble and test cone function and all interlocksComprehensive report to be provided

GET YOUREQUIPMENT BACKIN ALIGNMENT.

REBUILD PACKAGES INCLUDE:

PRICING INCLUDES PARTS AND LABOUR:

All rebuild packages exclude main frame seat liner replacement. All installations unreachable or in excess of Toromont service crane capabilities will require crane supplied by customer. Additional time may be required at discounted rates should an excessive amount of equipment, ie. Guarding, conveyors, hoods and assemblies need to be removed for access to the crushing component or countershaft assembly. Installation and commissioning must be performed by a Toromont Metso-certified technician. New mounting hardware is not included. Other wear items are not included (ie. liners). Toromont reserves the right to withdraw or change this offer at any time without notice. Offer is subject to availability. Prices refers to Toromont’s current list prices. Offer not valid in conjunction with any other discounts. Travel not included.

HP200 REBUILD PACKAGE

$33,258HP300 REBUILD PACKAGE

$36,847HP400 REBUILD PACKAGE

$38,840

HP200 $3,899 HP300 $4,464 HP400 $4,374

Applies to all qualifying manganese wears (jaw dies, cone liners, blow bars etc.)

Quantities are limited to Metso Columbia and Toromont in-stock items

GENUINE METSO LINERS AT

Discounts do not apply to martensitic or ceramic products.Toromont reserves the right to withdraw or change this offer at any time without notice. Offer is subject to availability. Prices refer to Toromont Cat’s current list prices. Offer not valid in conjunction with any other discount. Emergency transport is not included.

REDUCED PRICING

OEM LINERLAUNCH PROGRAM

OPTIONAL INSTALLATION AND TECHNICAL INSPECTIONAVAILABLE AT DISCOUNTED LABOUR RATES.

Orders must be in full container loads averaging 38,000lbs of product to qualify. Container must be returned if not purchased.Toromont reserves the right to withdraw or change this offer at any time without notice. Offer is subject to availability. Prices refer to Toromont Cat’s current list prices. Offer not valid in conjunction with any other discount.

ORDER BY THE CONTAINER AND

SAVE

WEARPARTS

LINERS

FULL CONTAINERLOAD PRICING

Select any grouping of OEM manganese crushing wear items (liners, dies, blow bars, cheek plates etc.) at great savings. Ceramic embedded wears excluded.

Delivery to site included with optional container purchase.

FLAT RATE INSPECTIONSON ALL LT/ST EQUIPMENT.

$510 +TRAVEL

Toromont technician will perform a visual inspection and comprehensive system analysis

All minor identified system adjustments to be performed during inspection, remainder to be documented

Comprehensive report to be provided

Unit must be in operational state at time of inspection. Travel to/from site is not included.Toromont reserves the right to withdraw or change this offer at any time without notice. All required oils, filters, seals and gaskets are extra. Prices refer to Toromont Cat’s current list prices. Offer not valid in conjunction with any other discount.

LOKOTRACKINSPECTIONS

LET TOROMONT’S HIGHLY TRAINED METSO-CERTIFIED TECHNICIANSENSURE THAT YOUR EQUIPMENT IS PROPERLY MAINTAINED ANDREADY FOR WORK.

Crusher must be operational during the inspection.Toromont reserves the right to withdraw or change this offer at any time without notice. Prices refer to Toromont Cat’s current list prices. Offer not valid in conjunction with any other discount. Travel is not included.

C-SERIES JAWASSESSMENT

PROGRAM

MAKE SURE THE HEART OF YOUR OPERATION IS RUNNING AT PEAK PERFORMANCE. TOROMONT’S HIGHLY TRAINED METSO-CERTIFIED TECHNICIANS WILL ENSURE YOUR EQUIPMENT IS IN OPTIMAL OPERATING CONDITION.

STATIONARY, MOBILE AND PORTABLE JAW CRUSHER INSPECTION INCLUDES THE FOLLOWINGPER MANUFACTURER’S SPECIFICATION:

OPERATIONAL INSPECTION

Save 25% on inspection labour costCheck condition of flywheels, position and mounting (including gib keys)Check condition of toggle plates, seats, retaining plates and protection rubberCheck nitrogen accumulator condition, pressure and attachmentCheck return rod cylinder, pins and bootCheck function of hydraulic setting adjustment and resetReplace hydraulic power unit filter and breather Check condition of hydraulic fluidCheck condition of frames and side platesMeasure clearance of guide pinsCheck tightness of frame bolts and connecting hardwareCheck tightness of cheek plate bolts and jaw plate boltsCheck tightness of frame bearing housing bolts and labyrinth ring boltsCheck cheek plates, pitman protection plate and jaw die wearCheck condition of motor base and motor tightness, v-belts and sheaves conditionCheck dampers and feed hopper condition

Test / inspect safety switches / sensorsCheck crucial grease flow in and out from pitman and frame bearingsCheck level sensor function if equippedTest hydraulic function and return cylinder charging intervalsCheck frame and pitman bearing temperatureCheck crusher coast downtime

CALL 1-866-464-9072 or email crushing@toromont.com with any questions or to request information