Upload
andri-kolomatski
View
537
Download
2
Embed Size (px)
Citation preview
2010 WiMAX Product Guide
WiMAX Antenna Solutions
WIMAXSector Antenna
2GHz & 3Ghz Mechanical Electrical Tilt (MET) Single Column Sector AntennasThe SP series Mechanical Electrical Tilt (MET) WiMAX antennas utilize a propri-etary and innovative distributed phase shifter technology that provides high performance pattern control and effi ciency. These antennas are designed to cover the 2.3-2.7GHz and 3.3-3.8GHz bands and offer an excellent front-to-back ratio of >32 dB with an SWR of less than 1.5 across the entire operating frequency.
Features
• Outstanding front-to-back ratio & port to port isolation• VSWR of less than 1.5• Null fi ll• Great upper side lobe suppression• Mechanical Electrical Tilt (MET)
ModelFrequency
Range Nominal GainAzimuth
BeamwidthElevation
Beamwidth
SP2327-18XP60MET 2300-2500 MHz2500-2700 MHz
17.5 dBi18.0 dBi
60° +/- 5° 60° +/- 5°
6°6°
SP2327-17XP90MET 2300-2500 MHz2500-2700 MHz
16.0 dBi16.5 dBi
90° +/- 5°90° +/- 5°
6°6°
SP3338-16XP60MET 3300-3500 MHz3500-3800 MHz
17.0 dBi17.5 dBi
60° +/- 5°60° +/- 5°
6°6°
SP3338-17XP90MET 3300-3500 MHz3500-3800 MHz
16.0 dBi16.5 dBi
90° +/- 5°90° +/- 5°
6°6°
Electrical Specifi cations
ALL ABOVE LISTED MODELS
-40°C to 70°C storage /-40°C to 70°C operating
48.5” x 6.7” x 3.5”(1232 x 171 x 90 mm)
8.8 lbs (4.0 kg)
125 mph(200 km/h)
Mechanical Specifi cations
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifi cations to the Materials on this catalog at any time. PCTEL further reserves the right to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are representations of products and actual production products might look differently than depicted.
Technical Data Polarization:
Linear dual slant +/- 45°
Nominal Impedance: 50 ohms
VSWR: < 1.5
Front to Back Ratio: > 32 dB
Port to Port Isolation:30 dB typical
Null Fill:-15dB
Beam Tilt: 0-12°
Upper Side Lobe Suppression: 30 degrees above horizon: > -18 dB
Radome Material: Gray UV resistant plastic
Connector: Type N female
Mounting Method: Adjustable pipe mount bracket (included)
ModelTemperature
Range Dimensions (L X W X D)
Weight(Mass)
WindSurvivability
NEW!
PCTEL, Inc. WEB: www.antenna.pctel.com
-PRELIMINARY-
2.3 to 2.7 GHz 65° & 90° Beamwidth Sector Antenna
WIMAXSector Antenna
Technical Data Polarization:
Linear dual slant +/- 45°
Nominal Impedance: 50 ohms
VSWR: < 1.5
Front to Back Ratio: > 25 dB
Port to Port Isolation:30 dB typical
Upper Side Lobe Suppression: 30 degrees above horizon: > -15 dB
Radome Material: Gray UV resistant plastic
Connector: Type N female
Mounting Method: Adjustable pipe mount bracket (included)
Mount Material: Nickel Zinc Trivalent Plated Steel (RoHS Compliant)
This WiMAX antenna is designed to cover frequencies from 2300 to 2700 MHz. It offers excellent port to port isolation of 30 dB typical, with a VSWR of less than 1.5 in a rugged, off-white UV resistant radome.
Features
Outstanding port to port isolation of 30 dB typicalVSWR of less than 1.5Great upper side lobe suppressionAdjustable scissors-style pipe mount bracket with 0-10° downtilt
••••
ModelFrequency
Range Nominal GainAzimuth
BeamwidthElevation
Beamwidth
Electrical Specifi cations
Mechanical Specifi cations
NEW!
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifi cations to the Materials on this catalog at any time. PCTEL further reserves the right to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are representations of products and actual production products might look differently than depicted.
SP2327-16XP65 2300-2500 MHz2500-2700 MHz
16.0 dBi16.5 dBi
65° +/- 5° 65° +/- 5°
9°9°
SP2327-15XP90 2300-2500 MHz2500-2700 MHz
15.0 dBi15.5 dBi
90° +/- 5° 90° +/- 5°
9°9°
SP2327-16XP65 -40°C to 65°C storage /-40°C to 65°C operating
28” x 6.7” x 3.5”(711 x 171 x 90 mm)
7 lbs (3.1 kg)
125 mph(200 km/h)
SP2327-15XP90 -40°C to 65°C storage /-40°C to 65°C operating
28” x 6.7” x 3.5”(711 x 171 x 90 mm)
7 lbs (3.1 kg)
125 mph(200 km/h)
ModelTemperature
RangeDimensions (L X W X D)
Weight (Mass)
Wind Survivability
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAXSector Antenna
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifi cations to the Materials on this catalog at any time. PCTEL further reserves the right to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are representations of products and actual production products might look differently than depicted.
Radiation Patterns
SP2327-15XP90 azimuth plane
SP2327-16XP65 azimuth plane
SP2327-15XP90 elevation plane
SP2327-16XP65 elevation plane
PCTEL, Inc. WEB: www.antenna.pctel.com
2.3 to 2.7 GHz 60° & 90° Beamwidth Sector Antenna With Double Null Fill
WIMAXSector Antenna
Technical Data Polarization:
Linear dual slant +/- 45°
Nominal Impedance: 50 ohms
VSWR: < 1.5
Front to Back Ratio: > 25 dB
Port to Port Isolation: 30 dB typical
Null Fill: 1st Sidelobe: -15dB2nd Sidelobe: -18dB
Radome Material: Gray UV resistant plastic
Connector: Type N female
Mounting Method: Adjustable pipe mount bracket (included)
Mount Material: Nickel Zinc Trivalent Plated Steel (RoHS Compliant)
This WiMAX antenna is designed to cover frequencies from 2300 to 2700 MHz. It offers excellent port to port isolation of > 30 dB with a VSWR of less than 1.5 in a rugged, off-white UV resistant radome.
Features
Outstanding port to port isolation of 30 dB typicalVSWR of less than 1.5Double null fi llAdjustable scissors-style pipe mount bracket with 0-10° downtilt
••••
ModelFrequency
Range Nominal GainAzimuth
BeamwidthElevation
Beamwidth
Electrical Specifi cations
Mechanical Specifi cations
NEW!
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifi cations to the Materials on this catalog at any time. PCTEL further reserves the right to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are representations of products and actual production products might look differently than depicted.
SP2327-16XP60NUF 2300-2500 MHz2500-2700 MHz
16.0 dBi16.5 dBi
60° +/- 5° 60° +/- 5°
9°9°
SP2327-15XP90NUF 2300-2500 MHz2500-2700 MHz
14.5 dBi15.0 dBi
90° +/- 5° 90° +/- 5°
9°9°
SP2327-16XP60NUF -40°C to 65°C storage /-40°C to 65°C operating
28” x 6.7” x 3.5”(711 x 171 x 90 mm)
7 lbs (3.1 kg)
125 mph(200 km/h)
SP2327-15XP90NUF -40°C to 65°C storage /-40°C to 65°C operating
28” x 6.7” x 3.5”(711 x 171 x 90 mm)
7 lbs (3.1 kg)
125 mph(200 km/h)
ModelTemperature
RangeDimensions (L X W X D)
Weight (Mass)
WindSurvivability
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAXSector Antenna
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifi cations to the Materials on this catalog at any time. PCTEL further reserves the right to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are representations of products and actual production products might look differently than depicted.
Radiation Patterns
SP2327-16XP60NUF azimuth plane
SP2327-15XP90NUF azimuth plane
SP2327-16XP60NUF elevation plane
SP2327-15XP90NUF elevation plane
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAXSector Antenna
2.3 to 2.7 GHz 60° & 90° Beamwidth Sector Antenna With Null FillThis WiMAX cross polarized antenna is designed to cover frequencies from 2300 to 2700 MHz. It offers excellent front-to-back ratio of > 32 dB with a VSWR of less than 1.5 in a rugged, off-white UV resistant radome.
Features
Outstanding front-to-back ratio & port to port isolationVSWR of less than 1.5Null fi llGreat upper side lobe suppressionAdjustable scissors-style pipe mount bracket with 0-10° downtilt
•••••
ModelFrequency
Range Nominal GainAzimuth
BeamwidthElevation
Beamwidth
SP2327-18XP60NUF 2300-2500 MHz2500-2700 MHz
17.5 dBi18.0 dBi
60° +/- 5° 60° +/- 5°
6°6°
SP2327-17XP90NUF 2300-2500 MHz2500-2700 MHz
16.0 dBi16.5 dBi
90° +/- 5°90° +/- 5°
6°6°
Electrical Specifi cations
SP2327-18XP60NUF -40°C to 70°C storage /-40°C to 70°C operating
48.5” x 6.7” x 3.5”(1232 x 171 x 90 mm)
8.8 lbs (4.0 kg)
125 mph(200 km/h)
SP2327-17XP90NUF -40°C to 70°C storage /-40°C to 70°C operating
48.5” x 6.7” x 3.5”(1232 x 171 x 90 mm)
8.8 lbs (4.0 kg)
125 mph(200 km/h)
Mechanical Specifi cations
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifi cations to the Materials on this catalog at any time. PCTEL further reserves the right to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are representations of products and actual production products might look differently than depicted.
Technical Data Polarization:
Linear dual slant +/- 45°
Nominal Impedance: 50 ohms
VSWR: < 1.5
Front to Back Ratio: > 32 dB
Port to Port Isolation:30 dB typical
Null Fill:-15dB
Upper Side Lobe Suppression: 30 degrees above horizon: > -18 dB
Radome Material: Gray UV resistant plastic
Connector: Type N female
Mounting Method: Adjustable pipe mount bracket (included)
Mount Material: Nickel Zinc Trivalent Plated Steel (RoHS Compliant)
ModelTemperature
Range Dimensions (L X W X D)
Weight(Mass)
WindSurvivability
NEW!
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAXSector Antenna
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifi cations to the Materials on this catalog at any time. PCTEL further reserves the right to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are representations of products and actual production products might look differently than depicted.
Radiation Patterns
SP2327-18XP60NUF azimuth plane
SP2327-17XP90NUF azimuth plane
SP2327-18XP60NUF elevation plane
SP2327-17XP90NUF elevation plane
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAXSector Antenna
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifi cations to the Materials on this catalog at any time. PCTEL further reserves the right to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are representations of products and actual production products might look differently than depicted.
3.3 to 3.8 GHz 65° & 90° Beamwidth Sector AntennaThis WiMAX antenna is designed to cover frequencies from 3300 to 3800 MHz. It offers excellent port to port isolation of 30 dB typical, with a VSWR of less than 1.5 in a rugged, off-white UV resistant radome.
Features
Outstanding port to port isolation of 30 dB typicalVSWR of less than 1.5Great upper side lobe suppressionAdjustable scissors-style pipe mount bracket with 0-10° downtilt
••••
NEW!
ModelFrequency
Range Nominal GainAzimuth
BeamwidthElevation
Beamwidth
Electrical Specifi cations
Mechanical Specifi cations
SP3338-17XP65 3300-3500 MHz3500-3800 MHz
16.5 dBi17.0 dBi
65° +/- 5° 65° +/- 5°
7°7°
SP3338-16XP90 3300-3500 MHz3500-3800 MHz
15.5 dBi16.0 dBi
90° +/- 5° 90° +/- 5°
7°7°
SP3338-17XP65 -40°C to 65°C storage /-40°C to 65°C operating
28” x 6.7” x 3.5”(711 x 171 x 90 mm)
7 lbs (3.1 kg)
125 mph(200 km/h)
SP3338-16XP90 -40°C to 65°C storage /-40°C to 65°C operating
28” x 6.7” x 3.5”(711 x 171 x 90 mm)
7 lbs (3.1 kg)
125 mph(200 km/h)
ModelTemperature
RangeDimensions (L X W X D)
Weight (Mass)
Wind Survivability
Technical Data Polarization:
Linear dual slant +/- 45°
Nominal Impedance: 50 ohms
VSWR: < 1.5
Front to Back Ratio: > 25 dB
Port to Port Isolation:30 dB typical
Upper Side Lobe Suppression: 30 degrees above horizon: > -15 dB
Radome Material: Gray UV resistant plastic
Connector: Type N female
Mounting Method: Adjustable pipe mount bracket (included)
Mount Material: Nickel Zinc Trivalent Plated Steel (RoHS Compliant)
WIMAXSector Antenna
PCTEL, Inc. WEB: www.antenna.pctel.com
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifi cations to the Materials on this catalog at any time. PCTEL further reserves the right to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are representations of products and actual production products might look differently than depicted.
Radiation Patterns
SP3338-17XP65 azimuth plane
SP3338-16XP90 azimuth plane
SP3338-17XP65 elevation plane
SP3338-16XP90 elevation plane
WIMAXSector AntennaWIMAXSector Antenna
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAXSector Antenna
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifi cations to the Materials on this catalog at any time. PCTEL further reserves the right to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are representations of products and actual production products might look differently than depicted.
4.9 to 5.9 GHz 65° & 90° Beamwidth Sector Antennas
-PRELIMINARY-This WiMAX antenna is designed to cover frequencies from 4.9 to 5.9 GHz. It offers excellent port to port isolation of 30 dB typical, with a VSWR of less than 1.5 in a rugged, off-white UV resistant radome.
Features
• Outstanding port to port isolation of 30 dB typical• VSWR of less than 1.5• Great upper side lobe suppression• Adjustable scissors-style pipe mount bracket with 0-10° downtilt
ModelFrequency
Range Nominal GainAzimuth
BeamwidthElevation
Beamwidth
Electrical Specifi cations
Mechanical Specifi cations
SP4959-17XP65 4.9-5.4 GHz5.4-5.9 GHz
17.5 dBi16.5 dBi
65° +/- 10% 65° +/- 10%
5°5°
SP4959-16XP90 4.9-5.4 GHz5.4-5.9 GHz
16.5 dBi15.5 dBi
90° +/- 10% 90° +/- 10%
5°5°
SP4959-17XP65 -40°C to 65°C storage /-40°C to 65°C operating
28” x 6.7” x 3.5”(711 x 171 x 90 mm)
7 lbs (3.1 kg)
125 mph(200 km/h)
SP4959-16XP90 -40°C to 65°C storage /-40°C to 65°C operating
28” x 6.7” x 3.5”(711 x 171 x 90 mm)
7 lbs (3.1 kg)
125 mph(200 km/h)
ModelTemperature
RangeDimensions (L X W X D)
Weight (Mass)
Wind Survivability
Technical Data Polarization:
Linear dual slant +/- 45°
Nominal Impedance: 50 ohms
VSWR: < 1.5
Front to Back Ratio: > 25 dB
Port to Port Isolation:30 dB typical
Upper Side Lobe Suppression: 30 degrees above horizon: > -15 dB
Radome Material: Gray UV resistant plastic
Connector: Type N female
Mounting Method: Adjustable pipe mount bracket (included)
Mount Material: Nickel Zinc Trivalent Plated Steel (RoHS Compliant)
WIMAXSector Antennas
PCTEL, Inc. WEB: www.antenna.com
PCTEL Broadband Technology Group WEB: www.antenna.pctel.com
WimaxSector antennas
2.3 to 2.7 GHz Vertically Polarized Sector Antennas With Null FillThese WiMAX vertically polarized antennas are designed to cover frequencies from 2300 to 2700 MHz. They offer an excellent front-to-back ratio of > 32 dB with a VSWR of less than 1.5 in a rugged, off-white UV resistant radome.
Features
Outstanding front-to-back ratio.VSWR of less than 1.5.Null fillGreat upper side lobe suppressionAdjustable scissors-style pipe mount bracket with 0-10° downtilt
•••••
modelFrequency
Range Nominal Gainazimuth
BeamwidthElevation
Beamwidth
SP2327-18VP60NUF 2300-2500 MHz2500-2700 MHz
17.5 dBi18.0 dBi
60° +/- 5°60° +/- 5°
6°6°
SP2327-17VP90NUF 2300-2500 MHz2500-2700 MHz
16.0 dBi16.5 dBi
90° +/- 5°90° +/- 5°
6°6°
SP2327-15VP120NUF 2300-2500 MHz2500-2700 MHz
15.0 dBi15.5 dBi
120° +/- 5°120° +/- 5°
6°6°
Electrical Specifications
SP2327-18VP60NUF -40°C to 70°C storage /-40°C to 70°C operating
48.5” x 6.7” x 3.5”(1232 x 171 x 90 mm)
8.8 lbs (4.0 kg)
125 mph(200 km/h)
SP2327-17VP90NUF -40°C to 70°C storage /-40°C to 70°C operating
48.5” x 6.7” x 3.5”(1232 x 171 x 90 mm)
8.8 lbs (4.0 kg)
125 mph(200 km/h)
SP2327-15VP120NUF -40°C to 70°C storage /-40°C to 70°C operating
48.5” x 6.7” x 3.5”(1232 x 171 x 90 mm)
8.8 lbs (4.0 kg)
125 mph(200 km/h)
Mechanical Specifications
Technical Data Polarization: Vertically Polarized
Nominal impedance: 50 ohms
VSWR: < 1.5
Front to Back Ratio: > 32 dB
Null Fill:-15dB
Upper Side Lobe Suppression: 30 degrees below horizon: > -18 dB
Radome material: Gray UV resistant plastic
Connector: Type N female
mounting method: Adjustable pipe mount bracket (included)
mount material: Nickel Zinc Trivalent Plated Steel (RoHS Compliant)
modelTemperature
Range Dimensions (L x W x D)
Weight(mass)
WindSurvivability
NEW!
representations of products and actual production products might look differently than depicted. service at any time without prior notice. All any pictures drawing etc. are to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or
cations to the Materials on this catalog at any time. PCTEL further reserves the right fiPCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modi
WIMAXSector Antenna
PCTEL offers the Materials as a service to you and res further reserves the right to make enhancements, improvements and ot All any pictures drawing etc. are representations of products and actual production products might look differently than depicted.
3.3 to 3.8 GHz Vertically Polarized Sector AntennasThese WiMAX vertically polarized antennas are designed to cover frequencies from 3300 to 3800 MHz. They offer a front-to-back ratio of > 25 dB, with a VSWR of less than 1.5 in a rugged, off-white UV resistant radome.
Features
VSWR of less than 1.5Adjustable scissors-style pipe mount bracket with 0-10° downtilt
••
NEW!
ModelFrequency
Range Nominal GainAzimuth
BeamwidthElevation
Beamwidth
Electrical Specifications
Mechanical Specifications
SP3338-16VP65 3300-3500 MHz3500-3800 MHz
15.5 dBi16.0 dBi
65° +/- 5° 8°
SP3338-15VP90 3300-3500 MHz3500-3800 MHz
14.5 dBi15.0 dBi
90° +/- 5° 8°
SP3338-14VP120 3300-3500 MHz3500-3800 MHz
13.0 dBi13.5 dBi
120° +/- 5° 8°
SP3338-16VP65 -40°C to 65°C storage /-40°C to 65°C operating
28” x 6.7” x 3.5”(711 x 171 x 90 mm)
7 lbs (3.1 kg)
125 mph(200 km/h)
SP3338-15VP90 -40°C to 65°C storage /-40°C to 65°C operating
28” x 6.7” x 3.5”(711 x 171 x 90 mm)
7 lbs (3.1 kg)
125 mph(200 km/h)
SP3338-14VP120 -40°C to 65°C storage /-40°C to 65°C operating
28” x 6.7” x 3.5”(711 x 171 x 90 mm)
7 lbs (3.1 kg)
125 mph(200 km/h)
ModelTemperature
RangeDimensions (L X W X D)
Weight (Mass)
Wind Survivability
Technical Data Polarization:
Vertically Polarized
Nominal Impedance: 50 ohms
VSWR: < 1.5
Front to Back Ratio: > 25 dB
Radome Material: Gray UV resistant plastic
Connector: Type N female
Mounting Method: Adjustable pipe mount bracket (included)
Mount Material: Nickel Zinc Trivalent Plated Steel (RoHS Compliant)
WIMAXSector Antennas
PCTEL, Inc. WEB: www.antenna.pctel.com
PCTEL Broadband Technology Group WEB: www.antenna.pctel.com
WimaxSector antenna
4.9 to 5.9 GHz 65°, 90° & 120° Beamwidth Sector Antenna This WiMAX antenna is designed to cover frequencies from 4.9 to 5.9 GHz. It offers excellent front to back ratio of > 25 with a VSWR of less than 1.7in a rugged, RAL 7047 color, UV resistant radome.
Features
Outstanding front to back ratio of > 25 dB.VSWR of less than 1.5Adjustable pipe mount.
•••
modelFrequency
Range Nominal Gainazimuth
BeamwidthElevation
Beamwidth
SPVS4959-18VP65 4.9-5.9 GHz 17.5 dBi 65° +/- 5° 6°
SPVS4959-17VP90 4.9-5.9 GHz 16.5 dBi 90° +/- 5° 6°
SPVS4959-15VP120 4.9-5.9 GHz 14 dBi 120° +/- 5° 6°
Electrical Specifications
SPVS4959-18VP65 -30°C to 75°C storage /-30°C to 75°C operating
22” x 3.1” x 3”(558.8 x 78.7 x 76 mm)
8.8 lbs (1.13 kg)
125 mph(200 km/h)
SPVS4959-17VP90 -30°C to 75°C storage /-30°C to 75°C operating
22” x 3.1” x 3”(558.8 x 78.7 x 76 mm)
8.8 lbs (1.13 kg)
125 mph(200 km/h)
SPVS4959-15VP120 -30°C to 75°C storage /-30°C to 75°C operating
22” x 3.1” x 3”(558.8 x 78.7 x 76 mm)
8.8 lbs (1.13 kg)
125 mph(200 km/h)
Mechanical Specifications
PCTEL offers the Materials as a service to you and res further reserves the right to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are representations of products and actual production products might look differently than depicted.
Technical Data Polarization:
Vertical
Nominal impedance: 50 ohms
VSWR: < 1.5
Front to Back Ratio: > 25 dB
Upper Side Lobe Suppression: 30 degrees below horizen: > -15 dB
120°azimuth Ripple: < 2 dB
Radome material: RAL 7047 color UV resistant ASA plastic
Connector: N, Female Bulkhead
mounting method: Adjustable pipe mount bracket (included)
mount material: Nickel Zinc Trivalent Plated Steel (RoHS Compliant)
modelTemperature
Range Dimensions (L x W x D)
Weight(mass)
WindSurvivability
-PRELIMINARY-
Technical Data General Speci cations:
2.4 GHz sector panel antennas
Maximum Power Input: 10 watts
Polarization: Vertical
Nominal Impedance: 50 ohms
VSWR: < 1.7:1
Color: White
Radome Material: UV resistant ASA plastic
Lighting Protection: DC grounded
Mounting Method:Adjustable pipe mount (included) +/- 15° of uptilt or downtilt (WISP2800 & WISP4900 models)
WISP4959018MBV
Antenna Electrical Specifications
Model Frequency Range Nominal Gain (+/- 0.5)
Horizontal Plane Beamwidth
WISP4959018MBV 4.9 GHz to 6.0 GHz
18 dBi @ 45°16 dBi @ 60°15 dBi @ 90°14 dBi @ 120°
45°, 60°, 90° or 120° (adjustable)
E-Plane Beamwidth Front-to-Back Ratio Typical Cross Poll Discrimination
8° > 32 dB > 20 dB
Mechanical Specifications
Model Dimensions Weight (Mass) Temperature Range
WISP4959018MBV 24” L x 6” W x 3” D (609 L x 152 W x 76 mm D) 4.5 lbs (2.1 Kg) -30°C to 75° C
Rated Wind Velocity Lateral Thrust at Rated Wind
Equivalent FlatPlate Area
125 mph 60 lbf without flaps120 lbf with flaps
.44 ft2 without flaps1.36 ft2 with flaps
The MAXRAD sector panel antennas cover frequencies of 4.9-6.0 GHz and are designed for use in sectorized WISP applications using a single sector or multiple sector antennas and multiple radios. They offer cost conscious antennas and system’s engineers an alternative to wall mounted omnidirectional antennas that can be susceptible to multipath interference and reduced coverage caused by wall-obstructed radiated signals. These sector antennas are ideal for use in apartment complexes, of ces, medical facilities, schools, industrial parks and shopping centers.
FeaturesThe antennas offer a choice of 45º, 60º, 90º or 120° single beamwidth sector. Multiple antennas can be utilized to cover several geographical sectors using additional radios. Great for use in place of an obstructed wall mounted omni.Industry leading front-to-back ratios. Ensure that the radiated energy is focused towards its target, and not to the back or sides of the antennas.Attractive, streamline design reduces wind loading for easier handling during installation.Includes adjustable pipe mount that permits uptilt or downtilt adjustment for more precise coverage of the geographic area.
•
•
•
•
Wideband Adjustable Sector Panel Antenna
The Quik Ship icon indicates that the product is available for immediate delivery from select distributors.
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAX ANTENNASSector Antennas
Dual Band, Dual Input Sector Panel Antenna
The MSPDBDI244914NF sector panel antenna provides coverage of 2.4 GHz to 2.5 GHz and 4.9 GHz to 5.9 GHz frequencies in a single antenna housing.Its dual N female bulkhead inputs permit simultaneous operation of 4.9 GHz Public Safety, 802.11a, b, g and WiMAX radio devices. This antenna features a rugged UV resistant housing and includes a pipe mount for outdoor installations.
FeaturesCovers 2.4 to 2.5 GHz and 4.9 to 5.9 GHz frequencies with excellent VSWR performance.Outstanding front-to-back ratio and controlled sidelope radiation ensures that the radiated energy is targeted towards the area of coverage.Included adjustable pipe mount permits uptilt, downtilt or vertical adjustment of +/-15 degrees for more precise coverage of the geographic area.Slim, low pro le housing and included pipe mount provide added mounting exibility for locations where space availability is limited.High isolation design – outstanding for both bands. 68 dB is typical when antennas are radially spaced and used for omnidirectional coverage (typically 3 antennas are used radially spaced, 120° apart).
•
•
•
•
•
Technical Data General Speci cations:
Dual band, dual input sector panel antenna
Polarization:Vertical
Nominal Impedance:50 ohms
VSWR:< 1.5:1 (2400-2500 MHz)< 1.7:1 (4925-5925 MHz)
Radome Material:Sky Gray UV resistant plastic
Lighting Protection:Each input DC grounded
Termination:2.4 to 2.5 GHz N female bulkhead4.9 to 5.9 GHz N female bulkhead
Mounting Method:Adjustable mountPipe mount included
Antenna Electrical Specifications
Model Frequency Range Nominal Gain Nominal Isolation (radially spaced 120° apart)
MSPDBDI244914NF 2400-2500 MHz4925-5925 MHz
14 dBi +/- 0.514 dBi +/- 0.5
- 68 dB- 68 dB
Model Frequency Range
Horizontal Plane Beamwidth
E-Plane Beamwidth
Front-to-Back Ratio
MSPDBDI244914NF 2400-2500 MHz4925-5925 MHz
90°120°
15°8°
> 32 dB> 32 dB
Mechanical SpecificationsModel Dimensions Weight (Mass)
MSPDBDI244914NF 36” L x 5.5” W x 3” D(91.4 x 13.9 x 7.6 cm)
6 lbs(13.2 kg)
Temperature Range Rated Wind Velocity Lateral Thrust at Rated Wind
Equivalent Flat Plate Area
-30°C to +75°C 125 mph 67 lbf 0.68 ft2
This antenna is designed to cover frequencies from 2.4 GHz to 2.5 GHz and 4.9 GHz to 5.9 GHz. Its slim, low
pro le housing and pipe mount provide added mounting exibility for locations
where space availability is limited.
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAX ANTENNASSector Antennas
MOBILE/PORTABLE ANTENNASChrome Nut Antennas
NON CELLULAR BASE STATION OMNIDIRECTIONAL ANTENNA
White MAXRAD High Performance Omnidirectional Antennas
The MHO24004NM omnidirectional antenna is a high performance low profile base station antenna in a rugged housing. The antenna is designed to cover frequencies from 2.4 to 2.5 GHz for Wi-Fi – Mesh applications. With its inte-gral N-Male connector at the base, this antenna can be directly mounted on the radio equipment.
Features
Slender rugged housing Innovative vented design with aerated cap and base drain systemWhite UV resistant radome. Protects the antenna from environmental fac-tors
•••
Technical Data General Specifications:
Omnidirectional Base Station Antenna
Maximum Input Power: 25 watts
Radome MaterialUV Stable Plastic
Nominal Impedance: 50 Ohms
Polarization: Vertical Linear
Mounting Method: N Female Bulkhead or Pipe Mount
Termination:Type N Male
PCTEL Broadband Technology Group WEB: www.antenna.pctel.com
ModelFrequency
RangeNominal
GainH-plane
BeamwidthE-plane
Beamwidth VSWR
MHO24004NM 2.4-2.5 GHz 4 dBi 360° (omni) 30° < 2.0
MHO24004NM 125 mph 0.04 ft2 3.1 lbs. 1.1 ft-lbs. 8.5” 0.3 lbs(.14 kg)
Electrical Specifications
Mechanical Specifications
ModelWind
SurvivalEquivalent Flat Plane
Area
Lateral Thrust @
Rated Wind
Bending Moment @Rated Wind
Height Weight
Omnidirectional Antenna
Omnidirectional Antenna, Side View (top); Bottom View (bottom)
Radiation Patterns
10
190
20
200
30
210
40
220
50
230
60
240
70
250
80
260
90
270
100
280
110
290
120
300
130
310
140
320
150
330
160
340
170
350
180 0−35−35 −30−30 −25−25 −20−20 −15−15 −10−10 −5−5
10
190
20
200
30
210
40
220
50
230
60
240
70
250
80
260
90
270
100
280
110
290
120
300
130
310
140
320
150
330
160
340
170
350
180 0−35−35 −30−30 −25−25 −20−20 −15−15 −10−10 −5−5
Azimuth Plane Elevation Plane
2 PCTEL Antenna Products Group, Inc. WEB: www.antenna.pctel.com
NON CELLULAR BASE STATION OMNIDIRECTIONAL ANTENNA
White MAXRAD High Performance Omnidirectional Antenna
The MHO24006NM omnidirectional antenna is a high performance low profile base station antenna in a rugged housing. This antenna is designed to cover frequencies from 2.4 to 2.5 GHz for Wi-Fi – Mesh applications. With its integral N-Male connector at the base, this antenna can be directly mounted on the radio equipment.
Features
Slender rugged housing Innovative vented design with aerated cap and base drain systemWhite UV resistant radome. Protects the antenna from environmental fac-tors
•••
Technical Data General Specifications:
Omnidirectional Base Station Antenna
Maximum Input Power: 25 watts
Radome MaterialUV Stable Plastic
Nominal Impedance: 50 Ohms
Polarization: Vertical Linear
Mounting Method: N Female Bulkhead or Pipe Mount
Termination:Type N Male
PCTEL Broadband Technology Group WEB: www.antenna.pctel.com
ModelFrequency
RangeNominal
GainH-plane
BeamwidthE-plane
Beamwidth VSWR
MHO24006NM 2.4-2.5 GHz 6 dBi 360° (omni) 20° < 2.0
MHO24006NM 125 mph 0.05 ft2 4.4 lbs. 2.2 ft-lbs. 12” 0.3 lbs.(.14 kg)
Electrical Specifications
Mechanical Specifications
ModelWind
SurvivalEquivalent Flat Plane
Area
Lateral Thrust @
Rated Wind
Bending Moment @Rated Wind
Height Weight
Omnidirectional Antenna, Side View (top); Bottom View (bottom)
Radiation Patterns
10
190
20
200
30
210
40
220
50
230
60
240
70
250
80
260
90
270
100
280
110
290
120
300
130
310
140
320
150
330
160
340
170
350
180 0−35−35 −30−30 −25−25 −20−20 −15−15 −10−10 −5−5
10
190
20
200
30
210
40
220
50
230
60
240
70
250
80
260
90
270
100
280
110
290
120
300
130
310
140
320
150
330
160
340
170
350
180 0−35−35 −30−30 −25−25 −20−20 −15−15 −10−10 −5−5
Azimuth Plane Elevation Plane
Omnidirectional Antenna
NON CELLULAR BASE STATION OMNIDIRECTIONAL ANTENNA
White MAXRAD High Performance Omnidirectional Antennas
The MHO24008NM omnidirectional antenna is a high performance low profile base station antenna in a rugged housing. The antenna is designed to cover frequencies from 2.4 to 2.5 GHz for Wi-Fi – Mesh applications. With its integral N-Male connector at the base, this antenna can be directly mounted on the radio equipment.
Features
Slender rugged housing Innovative vented design with aerated cap and base drain systemWhite UV resistant radome. Protects the antenna from environmental fac-tors
•••
Technical Data General Specifications:
Omnidirectional Base Station Antenna
Maximum Input Power: 25 watts
Radome MaterialUV Stable Plastic
Nominal Impedance: 50 Ohms
Polarization: Vertical Linear
Mounting Method: N Female Bulkhead or Pipe Mount
Termination:Type N Male
PCTEL Broadband Technology Group WEB: www.antenna.pctel.com
ModelFrequency
RangeNominal
GainH-plane
BeamwidthE-plane
Beamwidth VSWR
MHO24008NM 2.4-2.5 GHz 8 dBi 360° (omni) 13° < 2.0
MHO24008NM 125 mph 0.08 ft2 7.1 lbs. 5.7 ft-lbs. 19.3” 0.35 lbs(.16 kg)
Electrical Specifications
Mechanical Specifications
ModelWind
SurvivalEquivalent Flat Plane
Area
Lateral Thrust @
Rated Wind
Bending Moment @Rated Wind
Height Weight
Omnidirectional Antenna
Omnidirectional Antenna, Side View (top); Bottom View (bottom)
Radiation Patterns
10
190
20
200
30
210
40
220
50
230
60
240
70
250
80
260
90
270
100
280
110
290
120
300
130
310
140
320
150
330
160
340
170
350
180 0−35−35 −30−30 −25−25 −20−20 −15−15 −10−10 −5−5
10
190
20
200
30
210
40
220
50
230
60
240
70
250
80
260
90
270
100
280
110
290
120
300
130
310
140
320
150
330
160
340
170
350
180 0−35−35 −30−30 −25−25 −20−20 −15−15 −10−10 −5−5
Azimuth Plane Elevation Plane
MHO495907NF 4.94-5.875GHz 7 dBi 360° (omni) 12° < 2.0
MHO495907NM 4.94-5.875GHz 7 dBi 360° (omni) 12° < 2.0
MHO495907NF 125 mph 0.04 ft2 3.1 lbs. 1.1 ft-lbs. 10.2” 0.3 lbs(.14 kg)
MHO495907NM 125 mph 0.04 ft2 3.1 lbs. 1.1 ft-lbs. 10.2” 0.3 lbs(.14 kg)
Model Wind
SurvivalEquivalent Flat Plane
Area
Lateral Thrust @
Rated Wind
Bending Moment @Rated Wind
Height* Weight
White PCTEL High Performance Omnidirectional Antenna
The MHO495907NF & NM omnidirectional antenna are high performance low profile base station antennas in a rugged housing. These antennas are de-signed to cover broadband frequencies from 4.94GHz to 5.875GHz for Wi-Fi and WiMax applications.
FeaturesSlender rugged housing Innovative vented design with aerated cap and base drain systemWhite UV resistant radome. Protects the antenna from environmental fac-tors
•••
Technical Data General Specifications:
Omnidirectional Base Station Antenna
Maximum Input Power: 25 watts
Radome MaterialUV Stable Plastic
Nominal Impedance: 50 Ohms
Polarization: Vertical Linear
Termination:Type N Female & N Male
PCTEL, Inc. WEB: www.antenna.pctel.com
ModelFrequency
RangeNominal
GainH-plane
BeamwidthE-plane
Beamwidth VSWR
Electrical Specifications
Mechanical Specifications
Omnidirectional Antenna
MHO495905NF & NM Omnidirectional Antenna (left); Connector Views (right)
Radiation Patterns
Simulated Elevation Plane
BASE STATION OMNIDIRECTIONAL ANTENNA
NON CELLULAR BASE STATION OMNIDIRECTIONAL ANTENNA
White PCTEL High Performance Omnidirectional Antennas
The MHO58010NF & NM omnidirectional antennas are high performance low profile base station antennas in a rugged housing. These antennas are de-signed to cover frequencies in the 5 GHz bands for Wi-Fi – Mesh applications. With its integral N-Male or N-Female connector at the base, this antenna can be directly mounted on the radio equipment or can be mounted to a mast with the included mount.
Features
Low profile rugged housing Innovative vented design with aerated cap and base drain hole White UV resistant radome. Protects the antenna from environmental fac-tors
•••
Technical Data General Specifications:
Omnidirectional Base Station Antenna
Maximum Input Power: 25 watts
Radome MaterialUV Stable Plastic
Nominal Impedance: 50 Ohms
Polarization: Vertical Linear
Mounting Method: N Female/N Male Bulkhead or Pipe Mount
Termination:Type N Female & N-Male
PCTEL Broadband Technology Group WEB: www.antenna.pctel.com
ModelFrequency
RangeNominal
GainH-plane
BeamwidthE-plane
Beamwidth VSWR
MHO58010NF 5.15-5.875 GHz 10 dBi 360° (omni) 10° < 2.0
MHO58010NM 5.15-5.875 GHz 10 dBi 360° (omni) 10° < 2.0
MHO58010NF 125 mph 0.08 ft2 6.8 lbs. 5.6 ft-lbs. 18.38” 0.35 lbs(.16 kg)
MHO58010NM 125 mph 0.08 ft2 6.8 lbs. 5.6 ft-lbs. 18.38” 0.35 lbs(.16 kg)
Electrical Specifications:
Mechanical Specifications:
ModelWind
SurvivalEquivalent Flat Plane
Area
Lateral Thrust @
Rated Wind
Bending Moment @Rated Wind
Height Weight
Omnidirectional Antenna
MHO58010NF & NM Omnidirectional Antenna (left); Connector Views (right)
The wireless broadband omnidirectional antennas are designed to provide maximum performance and reliability under the toughest weather conditions. These antennas feature a UV stable, vented radome that pro vides ultimate pro tec tion against weather elements. They can be mast or wall mount ed.
FeaturesUV stable, pultruded berglass radome. Allows outdoor installation even in harsh climates.Vented system design. Provides reliable performance by protecting the electrical design against extreme moisture and/or temperatures.Thread relief on connector. Improved accessibility for taping reduces installation time and improves overall effectiveness.Internal o-ring seal in the base of the antenna with integrated connector at the base. Assures a watertight seal to prevent water from migrating into the antenna connector.
•
•
•
•
Technical Data Maximum Power: 25 watts
Polarization: Vertical
Nominal Impedance: 50 ohms
VSWR: < 1.5:1
Radome Material: UV resistant pultruded berglass
Lightning Protection:Not standard, but all models can be ordered with DC grounding.Add “DC” to the part number to order the antenna with DC grounding.
Termination:N female.
Mounting Base Diameter:1.25 inches
Mounting Method:MMK1924 - L bracket mount for wall or pipe mountMMK8A - Aluminum extruded bracket for mast mountingMMK11 - Ceiling mount bracket
For detailed specifications, visit http://antenna.pctel.com.
White MAXRAD Fiberglass Base Station (MFB) Omnidirectional Antennas
MFB49009 MFB58009
Vented System
MMK1924 MMK8A
PCTEL, Inc. WEB: www.antenna.pctel.com
WiMAX ANTENNASFiberglass Omnidirectional Antennas
Antenna Electrical Specifications
Model Frequency Range Gain Bandwidth @ 1.5:1 VSWR
Vertical Beamwidth @ 1/2 Power
MFB25007 2.5-2.7 GHz 7 dBi 200 MHz 13°
MFB49009 4.9-5.0 GHz 9 dBi 100 MHz 8°
MFB49009DC 4.9-5.0 GHz 9 dBi 100 MHz 8°
MFB51510 5.15-5.35 GHz 10 dBi 200 MHz 7°
MFB58009 5.725-5.875 GHz 9 dBi 150 MHz 8°
Mechanical Specifications
Model Height Weight (Mass) Bending Moment at Rated Wind
Lateral Thrustat Rated Wind
Equivalent Flat Plate Area
Wind Survival
MFB25007 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft2 125 mph
MFB49009 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft2 125 mph
MFB49009DC 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft2 125 mph
MFB51510 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft2 125 mph
MFB58009 15.7” (398.8 mm) 0.43 lbs (0.195 kg) 2.7 ft-lbs 4.1 lbs .046 ft2 125 mph
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAX ANTENNASFiberglass Omnidirectional Antennas
PCTEL Broadband Technology Group WEB: www.antenna.pctel.com
The wireless broadband omnidirectional antennas are designed to provide maximum performance and reliability under the toughest weather conditions. These antennas feature a UV stable, vented radome that provides ultimate protection against weather elements. They can be mast or wall mounted.
FeaturesUV stable, pultruded fiberglass radome. Allows outdoor installation even in harsh climates.Vented system design (all models except MFB24012). Provides reliable performance by protecting the electrical design against extreme moisture and/or temperatures.Thread relief on connector (all models, except MFB24012 which has a pigtail). Improved accessibility for taping reduces installation time and improves overall effectiveness.Internal o-ring seal in the base of the antenna with integrated connector at the base. Assures a watertight seal to prevent water from migrating into the antenna connector (all models, except MFB24012 which has a pigtail).Electrical downtilt options on select models. Provide system planners flexibility in challenging operating environments.
•
•
•
•
•
Technical Data Maximum Power: 25 watts
Polarization: Vertical
Normal Impedance: 50 ohms
VSWR: < 1.5:1
Radome Material: UV resistant pultruded fiberglass
lightning Protection:Not standard, but all models can be ordered with DC grounding.Add “DC” to the part number to order the antenna with DC grounding.
Termination:N female (except MFB24012).N male connector option available. To order, add “NM” to part number. N female, reverse polarity and reverse threaded connectors optional on most models.16” RG-213 pigtail with N female connector (for model MFB24012 only.)
Mounting base Diameter:1.25 inches (all models except MFB24012)1.5 inches (model MFB24012)
Mounting Method:MMK1924 — L bracket mount for wall or pipe mount (except MFB24010 and MFB24012)MMK8A - Aluminum extruded bracket for mast mounting (except model MFB24012)MMK11 - Ceiling mount bracket (for MFB24004, MFB24006 and MFB24008 only)MMK12 - Heavy duty bracket for mast mounting the MFB24012MMK14 - Light duty mounting clamp for MFB24012
For detailed specifications, visit http://antenna.pctel.com.
White MAXRAD Fiberglass Base Station (MFB) Omnidirectional Antennas
NON CellulaR OMNIDIReCTIONal baSe STaTION aNTeNNaSFiberglass Omnidirectional antennas
MFb49009 MFb58009 MFb24012
Vented System
MMK1924 MMK8a
MFb24004 with MMK11
MMK12
MFB19008A
MFB24004
MFB24006
MFB24008
MFB24008DT3
MFB24008DT5
MFB24008DT7
MFB24008DT12
MFB24010
MFB24012
MFB25007
MFB25007DT3
MFB49009
MFB51510
MFB58009
MFB58009PTNM
MFB58010
PCTEL Broadband Technology Group WEB: www.antenna.pctel.com
Antenna Electrical Specifications
Model Frequency Range Gain bandwidth @ 1.5:1 VSWR
Vertical beamwidth @ 1/2 Power
MFB19008A 1850-1990 MHz 8 dBi 140 MHz 12°
MFB24004 2400-2483.5 MHz 4 dBi 100 MHz 30°
MFB24006 2400-2483.5 MHz 6 dBi 100 MHz 20°
MFB24008 2400-2483.5 MHz 8 dBi 100 MHz 13°
MFB24008DT7 2400-2483.5 MHz 8 dBi 100 MHz 13°
MFB24008DT12 2400-2483.5 MHz 8 dBi 100 MHz 13°
MFB24010 2400-2483.5 MHz 10 dBi 100 MHz 9°
MFB24012 2400-2500 MHz 12 dBi 100 MHz 7°
MFB49009 4.9-5.0 GHz 9 dBi 100 MHz 8°
MFB51510 5.15-5.35 GHz 10 dBi 200 MHz 7°
MFB58009 5.725-5.875 GHz 9 dBi 150 MHz 8°
MFB58010 5.725-5.825 GHz 10 dBi 100 MHz 6°
Mechanical Specifications
Model Height Weight (Mass) bending Moment at Rated Wind
lateral Thrustat Rated Wind
equivalent Flat Plate area
Wind Survival
MFB19008A 24.0” (609.6 mm) 0.70 lbs (0.318 kg) 5.7 ft-lbs 5.9 lbs .07 ft2 125 mph
MFB24004 8.1” (205.7 mm) 0.34 lbs (0.154 kg) 0.7 ft-lbs 2.1 lbs .02 ft2 125 mph
MFB24006 11.6” (294.6 mm) 0.38 lbs (0.172 kg) 1.4 ft-lbs 3.0 lbs .04 ft2 125 mph
MFB24008 20.2” (513.1 mm) 0.50 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft2 125 mph
MFB24008DT7 20.2” (513.1 mm) 0.50 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft2 125 mph
MFB24008DT12 20.2” (513.1 mm) 0.50 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft2 125 mph
MFB24010 36.0” (914.4 mm) 0.65 lbs (0.295 kg) 14.7 ft-lbs 10.1 lbs .11 ft2 125 mph
MFB24012 44.0” (1,118 mm) 3.00 lbs (1.400 kg) 41 ft-lbs 22.4 lbs .25 ft2 125 mph
MFB49009 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft2 125 mph
MFB51510 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft2 125 mph
MFB58009 15.7” (398.8 mm) 0.43 lbs (0.195 kg) 2.7 ft-lbs 4.1 lbs .046 ft2 125 mph
MFB58010 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft2 125 mph
NON CellulaR OMNIDIReCTIONal baSe STaTION aNTeNNaSFiberglass Omnidirectional antennas
NON CellulaR OMNIDIReCTIONal baSe STaTION aNTeNNaS Fiberglass Omnidirectional antennas
These directional panel antennas are de signed to cover PCS, 4.9 GHz Public Safety band, 2.4 GHz and 5.8 GHz ISM frequencies, obtaining maximum gain in an attractive, low-pro le pack age. All models provide ef cient and stable per for mance across their speci ed bands and can be mount ed indoors or outdoors. Multi-band models covering public safety and 802.11a/b/g standards are available.
FeaturesPrinted circuit board design provides the best performance-to-price ratio.UL94-V0 plastic and PC board. Provides UL’s high ame retardant rating allowing maximum placement exibility and meeting stringent building re rating codes.Attractive, low pro le housing. Blends well with indoor and outdoor environments where aesthetic considerations are important.Corner exit RG-58/U pigtail design (PCS and 2.4 GHz models), .141 semi-rigid (5.1 and 5.8 GHz models), and high performance Plenum Rated ML195 (dual band models). Permits the linear polarized panel to be mounted in vertical or horizontal polarity with a wide variety of connectors.Optional UL 910 rated Plenum cable. Allows the cable to be installed in any indoor mounting location, including air ducts.Adjustable mounting brackets for indoor and outdoor mounting. Provide maximum exibility for indoor or outdoor installations.
••
•
•
•
•
Mounting MethodModel/Mount MPAB7 MPAB8 MPAB11 MPAB12
MP24008XFPT N/A N/A included optional
MP24013XFPT optional optional optional optional
MP24580809XFPT N/A N/A N/A optional
MP24581820PT optional optional N/A N/A
MP58013XFPT N/A N/A included optional
MP495913XFPT N/A N/A included optional
Mount Description
Heavy duty outdoor
adjustable mount with +/-35°
uptilt/downtilt.
If used with MP24018XFPT the mount provides +/-18° uptilt/
downtilt.
Same as MPAB8 but bracket is
longer.
Heavy duty outdoor adjustable
mount with 17° uptilt/downtilt.
If used with MP24018XFPT the
mount provides +/-9° uptilt/downtilt.
Short adjustable indoor mount.
It may be used outdoors with small housing panels only.
Long adjustable indoor corner
mount.
Directional Panel Antennas for Indoor or Outdoor Applications
Technical Data General Speci cations:
Directional panel antennas
Maximum Power Input:See Electrical Speci cations
Polarization: Linear, vertical/horizontal
Nominal Impedance: 50 ohms
VSWR: See Electrical Speci cations
Radome Material: UL 94-V0 plastic
Cable: See Mechanical Speci cations
Connector Options:N female (part #NF) standard. Other connector options are available. Consult factory.
Small housing panel onMPAB11 wall mount
Small housing panels are 5.1” H x 4.7” W x 1.5” D
13 dBi panel on MPAB12 corner wall mount
MP24018XFPT
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAX ANTENNASDirectional Panel Antennas
Antenna Electrical Specifications
Model Frequency Range Gain 3 dB Horizontal Beamwidth
3 dB Vertical Beamwidth
Front-to-Back Ratio
Max. Power Input VSWR
MP24008XFPT 2.30-2.50 GHz 8.5 dBi 60° 60° > 15 dB 20 watts < 1.5:1
MP24013XFPT 2.30-2.50 GHz 13.0 dBi 35° 35° > 18 dB 20 watts < 1.5:1
MP24580809PT 2.40-2.48/4.94-5.85 GHz
8 dBi/9 dBi 60°/50° 60°/40° > 22 dB/
> 15 dB 25 watts < 2.0:1/< 2.0:1
MP24581820PT 2.40-2.48/4.94-5.85 GHz
18 dBi/20 dBi 21°/9° 21°/9° > 30 dB/
> 25 dB 25 watts < 2.0:1/< 2.0:1
MP58013XFPT 5.72-5.87 GHz 12.5 dBi 42° 28° > 23 dB 20 watts < 1.5:1
MP495913XFPT 4.9-5.9 GHz 13.0 dBi 40° 27° >25 dB 25 watts <1.5:1
Mechanical Specifications
Model Dimensions Weight (Mass) Temperature Range
Wind Loading (Frontal)@100 mph Wind Cable
MP24008XFPT 5.1” x 4.7” x 1.5” (12.9 x 11.9 x 3.8 cm) 0.5 lbs (0.23 kg) -40°C to +70°C 9.3 lbs 12” (30.5 cm) RG58/
U**
MP24013XFPT 8.8” x 8.1” x 1.6” (22.4 x 20.6 x 4.06 cm) 1.2 lbs (0.54 kg) -40°C to +70°C 27.9 lbs 12” (30.5 cm) RG58/
U**
MP24580809PT 5.1” x 4.7” x 1.5” (12.9 x 11.9 x 3.8 cm) 0.5 lbs (0.23 kg) -40°C to +70°C 9.3 lbs 12” (30.5 cm) ML195*
MP24581820PT 15.1” x 13.9” x 1.9” (38.4 x 35.3 x 4.8 cm) 3.9 lbs (1.8 kg) -40°C to +70°C 85 lbs 12” (30.5 cm)
.141 semi-rigid*
MP58013XFPT 5.1” x 4.7” x 1.5” (12.9 x 11.9 x 3.8 cm) 0.5 lbs (0.23 kg) -40°C to +70°C 9.3 lbs 6” (15.25 cm)
.141 semi-rigid*
MP495913XFPT 5.1” x 4.7” x 1.5” (12.9 x 11.9 x 3.8 cm) 0.5 lbs (0.23 kg) -40°C to +70°C 9.3 lbs 6” (15.25 cm)
.141 semi-rigid*
* Plenum Rated cable** UL910 Plenum Rated cable optional for these models
The Quik Ship icon indicates that the product is available for immediate delivery from select distributors.
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAX ANTENNASDirectional Panel Antennas
WISP Directional Panel Antennas
The directional panel antennas are de signed to provide maximum gain at 2.4 GHz frequencies. With a VSWR of less than 1.6:1, all models provide ef cient and stable performance across the band. These robust antennas are designed for outdoor applications.
FeaturesPatented printed circuit board design. Best performance-to-price ratio.Attractive, low pro le UV stable housing. Blends well with indoor and outdoor environments where aesthetic considerations are important.Corner exit RG-58/U pigtail design. Permits the panel to be mounted in vertical or horizontal polarity.Adjustable mounting brackets for outdoor mounting. Provide maximum exibility for outdoor installations.
••
•
•
Antenna Electrical Specifications
Model Frequency Range Gain
3 dB Horizontal Beamwidth
3 dB Vertical Beamwidth
Front-to-Back Ratio
WISP24009PTNF 2.3-2.5 GHz 9.0 dBi 60° 60° > 15 dB
WISP24013PTNF 2.3-2.5 GHz 13.0 dBi 35° 35° > 18 dB
WISP24018PTNF 2.3-2.5 GHz 18.0 dBi 18° 19° > 25 dB
Mechanical Specifications
Model Dimensions Range
Weight (Mass)
Temperature Range
Frontal Wind Loading
@100 mph
WISP24009PTNF 5.1” x 4.7” x 1.5” 0.5 lbs -40°C to +70°C 9.3 lbs
WISP24013PTNF 8.8” x 8.1” x 1.6” 1.2 lbs -40°C to +70°C 27.9 lbs
WISP24018PTNF 15.1” x 13.9” x 1.9” 3.9 lbs -40°C to +70°C 85 lbs
Mounting MethodModel Included Mount
WISP24009PTNF Indoor/outdoor articulating mount
WISP24013PTNF Heavy duty outdoor adjustable mount
WISP24018PTNF Heavy duty outdoor adjustable mount
WISP Directional Panels
Technical Data General Speci cations:
Directional panel antennas
Maximum Power Input:20 watts
Polarization:Linear, vertical/horizontal
Nominal Impedance:50 ohms
VSWR:< 1.6:1
Radome Material:UV stable plastic
Cable:12” RG58/U with attached female N connector
Temperature Range:-40°C to +70°C
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAX ANTENNASDirectional Panel Antennas
PCTEL, Inc. WEB: www.antenna.com
IN-BUILDING ANTENNASCeiling Mount Omnidirectional Antennas
Technical Data Maximum Power:
50 watts
Polarization: Vertical, linear
Nominal Impedance: 50 ohms
VSWR: < 2.0:1 across the band
Housing Material: White, UL 94V-0, UV resistant plastic
Connector Termination: N female bulkhead standard*
*Please order cable assembly with mating N male termination separately
Mounting Method: Screw mount (screws provided)
Multi-band Ceiling Mount Omnidirectional Antenna-698 MHz-6GHz
The PCTCMB in-building antenna offers great value for OEMs, VARs and Sys-tems Integrators looking for multi-band coverage, performance reliability and an attractive “consumer oriented” housing at an affordable price. Ideal applications include in-building public safety, retail establishments, enterprise networks, public “hot spots” and facilities management. Features• No tune, multi-band platform covers the most widely used in-building fre-
quencies• N female fl ange connector termination provides a single cable exit for
easier installation and/or antenna replacement• Attractive low profi le design addresses aesthetic considerations and over-
head clearance requirements• UL 94V-0 plastics and PC boards for compliance with strict building safety
code requirements• Aluminum backplate template with drill guiding screw holes for faster,
easier installation and labor cost optimization• Outstanding value: PCTEL world-known antenna quality and reliability, a
competitive price; and a single antenna covering multiple frequency ap-plications
Antenna Electrical Specifi cations
ModelFrequency
RangeNominal
GainReturn
Loss
PCTCMB7058PTNF
698-850 MHz850-960 MHz
1710-2170 MHz2300-2700 MHz3400-3700 MHz4900-6000 MHz
1.5 dBi2 dBi4 dBi5 dBi5 dBi6 dBi
≥9.5dB≥9.5dB≥9.5dB≥9.5dB≥9.5dB≥9.5dB
Mechanical Specifi cationsModel Dimensions
(Height x Diameter)Weight (Mass)
TemperatureRange
PCTCMB7058PTNF 3.2 x 12 inches(82 x 305 millimeters)
1.1 lbs(0.5 kg) -40°C to 80°C
PCTEL, Inc. WEB: www.antenna.com
IN-BUILDING ANTENNASCeiling Mount Omnidirectional Antennas
Radiation Patterns
Elevation Cut at 776 MHz Elevation Cut at 905 MHz
Elevation Cut at 1940 MHz Elevation Cut at 2450 MHz
Elevation Cut at 3550 MHz Elevation Cut at 5450 MHz
The MYP directional yagis can be used as bridge antennas between two networks or for point-to-point communications. They are eld adjustable for vertical or horizontal polarization with matched principal plane beamwidths for optimum performance in either orientation. This design also provides improved front-to-back ratio and sidelobe suppression that reduces interference. All models feature a robust mounting structure for consistent performance regardless of weather conditions.
FeaturesField adjustable to allow vertical or horizontal polarity. Eliminates co-channel interference from neighboring radiators. Polarity markings molded on the antenna ensure installation in the correct orientation.Optional, articulating mount. Allows precise adjustment of the antenna both vertically and horizontally.All antennas include a robust mast mount bracket designed to withstand 125 mph wind.Matched principal plane beamwidths with excellent sidelobe suppression and cross-polarization rejection of more than 20 dB. Provides superior signal quality with enhanced gain performance and minimal interference from neighboring radiators.30 dB front-to-back ratio permits less physical separation on the tower thus adding mounting exibility at installation sites where space is limited.Attractive weather-proof radome constructed of UV resistant material. Provides robust and trouble-free use in harsh outdoor environments.
•
•
•
•
•
•
Enclosed Yagi Antenna Series
Technical Data General Speci cations:
2.4 GHz ISM enclosed yagi antenna series
Maximum Power: 5 watts
Polarization: Vertical or horizontal, linear (user adjustable)
Nominal Impedance: 50 ohms
VSWR: < 1.5:1
Wind Survival: 125 mph
Cable: 12” (305 mm) Pro-Flex™ Plus 195
Termination:N, female is standardConsult factory for other connector options
Mounting Method:Heavy duty yagi mounting bracket (included) permits mast mounting on masts up to 2” O.D.MYK18 adjustable wall/pipe mount allows 180°(included angle) azimuth and elevation adjustment (sold separately.)Stacking harnesses available to stack two yagis (sold separately.)
MYP24015PT
MYK18
Antenna Electrical Specifications
Model Frequency Range
Nominal Gain
Horizontal Beamwidth
@ 1/2 Power
Vertical Beamwidth
@ 1/2 Power
Front-to-Back Ratio
MYPB24015PT 2400-2686 MHz 15 dBi 30° 30° 30 dB
Mechanical Specifications
Model Dimensions Weight (Mass)
Lateral Thrustat Rated Wind
Equivalent Flat Plate Area
MYPB24015PT 14” L x 3” OD(356 x 76 mm)
1 lb (0.5 kg) 18.3 lbs 0.20 ft2
AccessoriesModel Description
MSK2450MN Stacking harness for two 2.4 GHz MYP directional yagis. N male connector.
MSK2450MSMA Stacking harness for two 2.4 GHz MYP directional yagis. Male SMA connector.
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAX ANTENNASYagi Antennas
WIMAX ANTENNASCable Assemblies and Accessories for WiMAX Antennas
Cable Assemblies and Accessories
Cable AssembliesModel Description
MCA195FSMAMN Pro-Flex™ Plus 195 cable assembly with type SMA female and N male connectors
MCA195FSMA-NC Pro-Flex™ Plus 195 high performance RG-58/U cable assembly with SMA female jack connector
MCA195MSMAFSMA Pro-Flex™ Plus 195 cable assembly with SMA male and N female connectors
MCA195NFFSMA Pro-Flex™ Plus 195 cable assembly with SMA female and N female connectors
MCA195NFNM Pro-Flex Plus™ 195 cable assembly with SMA female and N male connectors
MCA195NMFME Pro-Flex Plus™ 195 cable assembly with N male and FME connectors
MCA195NMMU Pro-Flex™ Plus 195 cable assembly with N male and mini-UHF connectors
MCA195NMNM Pro-Flex™ Plus 195 cable assembly with N male and N male connectors
MCA195NMRPC Pro-Flex™ Plus 195 cable assembly with N male and reverse polarity TNC connectors
MCA195NMRPMSMA Pro-Flex™ Plus 195 one-foot cable assembly with N male and SMA reverse polarity connectors
MCA195NMTFRPC Pro-Flex™ Plus 195 cable assembly with Te on N male and reverse polarity TNC connectors
MCA195PL259MN Pro-Flex™ Plus 195 cable assembly with PL259 and male N connectors
MCA195PLPL Pro-Flex™ Plus 195 cable assembly with mini UHF connectors on both ends
MCA195RANMC Pro-Flex™ Plus 195 cable assembly with TNC male and right angle “N” male connectors
MCA195RPCJNM Pro-Flex™ Plus 195 cable assembly with male TNC and reverse polarity TNC Jack 999 (female) connectors
MCA195RPCJRPC Pro-Flex™ Plus 195 cable assembly with male TNC and reverse polarity TNC Jack (female) connectors
MCA400NFNM//50 Cable assembly with 50 ft. of LMR400 with SMA female and N male connectors
MCA400NMNM5 LMR400 cable assembly 5 ft. with N male and N male connectors
Cable AccessoriesModel Description
MGBGrounding block. Grounded N female pass through connector and mounting bracket. Low cost way to make your installation meet National Electrical Codes without using a lighting arrestor.
MLP24RPC
Lightning arrestor. Designed for maximum lightning capacity, no maintenance and minimum insertion loss and VSWR covering the 2.4 GHz ISM band. Includes Reverse Polarity male/female TNC connectors only.
MGB Grounding Block
MPD243NF
PCTEL, Inc. WEB: www.antenna.pctel.com
2.3 to 2.7 GHz Parabolic Reflector Antenna Series with Radome
The MPRC prime focus parabolic reflector antenna series suppresses extrane-ous sidelobe and cross-polarized energy. These antennas feature a micro ne elevation and azimuth adjustment kit. The MPRC series is provided with a radome as a standard feature.
Features
Available in two and three foot diameter sizesRadome comes standard and installedRear mounted feed – radome never has to be removedContinuous polarization adjustmentFine adjustment mechanism for elevation and azimuthAssembled and attached offset mount allows easy access to connectorDouble saddle mounting brackets will accommodate pipes ranging from 1.625” to 4.5” ODRobust mounting structure. Three point mount attachment improves stability and prevents re ector distortion and mechanical oscillation2 foot versions are UPS shippable
•••••••
•
•
Technical Data General Speci cations:
Prime Focus Parabolic Reflector Antenna
Maximum Power: 5 watts
Nominal Impedance: 50 ohms
SWR/return loss: < 1.5 / >13.9 dB
Polarization: Linear, continuously adjustable
Front-to-back Ratio: 28 dB (MPRC2423)29 dB (MPRC3623)
Interface Connector: Type N female
Mount Interface: Accommodates 1.625” to 4.5” OD pipe
PCTEL, Inc. WEB: www.antenna.pctel.com
Model Frequency Range
Nominal Gain (+/- 0.5 dB
at mid band)
3 dB Beamwidth,
Nominal
MPRC2423 2.3 - 2.7 GHz 21.5 dBi 12.4°
MPRC3623 2.3 - 2.7 GHz 24.5 dBi 9°
BASE STATION ANTENNAS
Electrical Specifications
Mechanical Specifications
MPRC2423 125 mph -40°C to +80°C 26”
MPRC3623 125 mph -40°C to +80°C 36”
ModelWind Survival
with 1/2” of radial iceTemperature
Range Diameter
MPRC Prime Focus Parabolic Reflector Antennas
MPRC antenna (above); back of antenna (below)
Technical Data General Specifi cations:
Prime Focus Parabolic Refl ector Antenna
Maximum Power: 5 watts
Nominal Impedance: 50 ohms
SWR/return loss: < 1.5 / >13.9 dB
Polarization: Linear, continuously adjustable
Front-to-back Ratio: 32 dB (MPRC2434)33 dB (MPRC3634)
Interface Connector: Type N female
Mount Interface: Accommodates 1.625” to 4.5” OD
3.3 to 3.8 GHz Parabolic Refl ector Antenna Series with RadomeThe MPRC prime focus parabolic refl ector antenna series suppresses extraneous sidelobe and cross-polarized energy. These antennas feature a micro fi ne elevation and azimuth adjustment kit. The MPRC series is provided with a radome as a standard feature.
FeaturesAvailability in two and three foot diameter sizesRadome comes standard and installedRear mounted feed – radome never has to be removedContinuous polarization adjustmentFine adjustment mechanism for elevation and azimuthAssembled and attached offset mount allows easy access to connectorDouble saddle mounting brackets will accommodate pipe attachments ranging from 1.625” to 4.5” ODRobust mounting structure. Three point mount attachment improves stability and prevents refl ector distortion and mechanical oscillation2 foot versions are UPS shippable
•••••••
•
•
Antenna Electrical Specifi cations
Model Frequency RangeNominal Gain (+/- 0.5 dB
at mid band)
3 dB Beamwidth,
Nominal
MPRC2434 3.3 - 3.8 GHz 25.0 dBi 8.7°
MPRC3634 3.3 - 3.8 GHz 27.8 dBi 6.3°
Mechanical Specifi cations
Model Wind Survival with 1/2” of radial ice
Temperature Range Diameter
MPRC2434 125 mph -40°C to +80°C 26”
MPRC3634 125 mph -40°C to +80°C 36”
PCTEL, Inc. WEB: www.antenna.pctel.com
NON CELLULAR DIRECTIONAL BASE STATION ANTENNASMPRC Prime Focus Parabolic Refl ector Antennas
Technical Data General Specifications:
Prime Focus Parabolic Reflector Antenna
Maximum Power: 5 watts
Nominal Impedance: 50 ohms
SWR/return loss: < 1.5 / >13.9 dB
Polarization: Linear, continuously adjustable
Front-to-back Ratio: 36 dB (MPRC2449)43 dB (MPRC3649)
Interface Connector: Type N female
Mount Interface: Accommodates 1.625” to 4.5” pipe OD
For detailed specifications, visit http://antenna.pctel.com.
4.9 to 6.0 GHz Wideband Parabolic Reflector Antenna Series with RadomeThe MPRC prime focus parabolic reflector antenna series suppresses extraneous sidelobe and cross-polarized energy. These antennas feature a micro fine elevation and azimuth adjustment kit. The MPRC series is provided with a radome as a standard feature.
FeaturesAvailability in two and three foot diameter sizesRadome comes standard and installedRear mounted feed – radome never has to be removedLinear, continuous polarization adjustmentFine adjustment mechanism for elevation and azimuthAssembled and attached offset mount allows easy access to connectorDouble saddle mounting brackets will accommodate pipe attachments ranging from 1.625” to 4.5” ODRobust mounting structure. Three point mount attachment improves stability and prevents reflector distortion and mechanical oscillation2 foot versions are UPS shippable
•••••••
•
•
PCTEL Broadband Technology Group WEB: www.antenna.pctel.com
NON CELLULAR DIRECTIONAL BASE STATION ANTENNASMPRC Prime Focus Parabolic Reflector Antennas
Antenna Electrical Specifications
Model Frequency RangeNominal Gain (+/- 0.5 dB
at mid band)
3 dB Beamwidth,
Nominal
MPRC2449 4.9 - 6.0 GHz27.7 dBi at 4.9 GHz28.5 dBi at 5.25 GHz29.0 dBi at 5.8 GHz
6°
MPRC3649 4.9 - 6.0 GHz30.4 dBi at 4.9 GHz31.2 dBi at 5.25 GHz32.0 dBi at 5.8 GHz
4°
Mechanical Specifications
Model Wind Survival with 1/2” of radial ice
Temperature Range Diameter
MPRC2449 125 mph 40°C to +80°C 26” (66 cm)
MPRC3649 125 mph 40°C to +80°C 36” (91 cm)
Technical Data General Speci cations:
Prime Focus Parabolic Reflector Antenna
Maximum Power: 25 watts
Nominal Impedance: 50 ohms
SWR/return loss: < 1.5 / >13.9 dB for 5.15-6.0 GHz operation< 1.7/ >12 dB for 4.9-5.15 GHz operation
Polarization: Dual linear, continuously adjustable
Front-to-back Ratio: 36 dB (MPRD2449)43 dB (MPRD3649)
Interport Isolation: > 35 dB
Cross Polarization Discrimination: > 30 dB
Interface Connector: Type N female
Mount Interface: Accommodates 1.625” to 4.5” pipe OD
4.9-6.0 GHz Wideband Dual Polarized Parabolic Reflector Antenna Series with RadomeThe MPRD prime focus parabolic re ector antennas suppress extraneous sidelobe and cross-polarized energy. These antennas feature a micro ne elevation and azimuth adjustment kit. All MPRD antennas are provided with a radome as a standard feature.
FeaturesAvailability in two and three foot diameter sizesRadome comes standard and installedRear mounted feed – radome never has to be removedLinear, continuous polarization adjustmentFine adjustment mechanism for elevation and azimuthAssembled and attached offset mount allows easy access to connectorDouble saddle mounting brackets will accommodate pipe attachments ranging from 1.625” to 4.5” ODRobust mounting structure. Three point mount attachment improves stability and prevents re ector distortion and mechanical oscillation2 foot versions are UPS shippable
•••••••
•
•
PCTEL, Inc. WEB: www.antenna.pctel.com
Antenna Electrical Specifications
Model Frequency Range Nominal Gain (+/- 0.5 dB)
3 dB Beamwidth,
Nominal
MPRD2449 4.9-6.0 GHz 28.1 dBi at 5.15 GHz29.4 dBi at 5.875 GHz 6°
MPRD3649 4.9-6.0 GHz 31.0 dBi at 5.15 GHz32.0 dBi at 5.875 GHz 4°
Mechanical Specifications
Model Wind Survival with 1/2” of radial ice
Temperature Range Diameter
MPRD2449 125 mph -40°C to +80°C 26” (66 cm)
MPRD3649 125 mph -40°C to +80°C 36” (91 cm)
NON CELLULAR DIRECTIONAL BASE STATION ANTENNASMPRD Parabolic Reflector Antennas
Wideband Mobile Antenna for WiMAX ApplicationsThe BMAXC233805 is a low pro le wideband mobile antenna designed for operation in the 2.3-3.8 GHz WiMAX frequencies.
FeaturesMolded polymer base provides ruggedness and durabilityWideband coverage of 2.3-3.8 GHz WiMAX frequenciesAntenna is ready to install; no rod cutting is required for operation across the speci ed frequencies
•••
Technical Data Maximum Power:
100 watts
Polarization: Vertical, linear
Nominal Impedance: 50 ohms
SWR: 1.7 typical, 2.0 max
Radiator Material:.100” OD stainless steel; black nish
Base Coil Housing: Molded polymer with a plated insert ring and a spring-loaded contact pin
Phasing Coil Housing:Molded polymer jacket with copper, nickel and chrome plated bushing
Rod Ferrule: 5/16” -24 thread; black chrome plated nish
Antenna Electrical Specifications
Model Frequency Range Gain Rod Type
BMAXC233805 2.3-3.8 GHz 5 dBi* Collinear/Closed
PCTEL, Inc. WEB: www.antenna.pctel.com
WIMAX MOBILE ANTENNAS
Mechanical SpecificationsModel Antenna Height
BMAXC233805 4.75” (12.06 cm)
Vertical Elevation
*Measured on a 4 foot diameter ground plane.
10
190
20
200
30
210
40
220
50
230
60
240
70
250
80
260
90
270
100
280
110
290
120
300
130
310
140
320
150
330
160
340
170
350
180 03030 2525 2020 1515 1010 55 00
Mounting OptionsThe following mounts are recommended with these antennas:
Model Description
MLFML195C High performance permanent 3/4” hole, 1-1/8”-18 thread mount. Includes 17 ft of Pro-FlexTM Plus 195 cable. Loose TNC male connector included. Other connector options available.
(B)GMLFML195C High performance 3-1/4” diameter magnetic base, 1-1/8”-18 thread mount mount. Includes 12 ft of Pro-FlexTM Plus 195 cable terminated with TNC male connector (attached). Other connector options available.
Low Profi le GPS Multi-band AntennaThe Medallion™ GPS Multi-Band antenna features an attractive modern design in a rugged low profi le housing. This antenna offers multi-band coverage of GSM 850, GSM 900, GSM 1800, GSM 1900, 3G, WiFi/WiMAX frequencies, coupled with GPS L1 capability for outstanding value and fl exibility.
Features• No tune, multi-band coverage: GSM 850, GSM 900, GSM 1800,
GSM 1900, 3G and WiFi/WiMAX frequencies, coupled with GPS L1 frequencies
• Stylish low profi le housing provides “omnidirectional” trouble-free installation while complementing most vehicular aesthetic requirements
• Metal 3/4-inch stud mount with slotted jam nut provides single cable exit for easier installation and/or antenna replacement
• IP56 compliant design with custom over molded gasket provides added protection against water or dust ingress under severe environmental conditions
Electrical Specifi cations - GPS AntennaFrequency Band:
1575.42 MHz (GPS L1)
GPS Antenna Gain:3.5dBic
Amplifi er Gain:27dB
Nominal Impedance:50 ohms
Output VSWR:1.5:1 typical
DC Current:20 mA Nominal; < 30 mA @ -40°C to +85° C
DC Voltage:3-5.5 V
Noise Figure:1.6dB Typical
Grounding Protection:DC grounded (both antennas)
Filtering*:20dB rejection @ +/- 100 MHz from center frequency
Compliance:IP56RoHS compliant
Electrical Specifi cations - RF AntennasModel
PCTMDLOperating
Frequencies Polarization Nominal Impedance
Gain* (Typical) VSWR Max.
Power
Voice/Data RF Element
806-960 MHz/1710-2170 MHz
Vertical, linear 50 ohms
2.8dBi (806-960 MHz) / 3.3dBi
(1710-2170 MHz)< 2.0:1
20 Watts
Broadband Wireless RF
Element
2.3 GHz - 2.6 GHz
Vertical, linear 50 ohms 3.9dBi < 2.0:1
10 Watts
PCTEL, Inc. WEB: www.antenna.com
MOBILE ANTENNASGPS & Multi-band Transit Antenna
*Measured on a 4x4 ft ground plane.**Standard model. Contact Customer Service to request other connector options. Low loss Pro-Flex Plus 195 cable and high out-of-band rejection LNA assembly optional.
Mechanical Specifi cationsHousing Material Dimensions Coax (3)** Connectors
UV resistant, Black ABS
5.1” x 4.95” x 1.7”(129.6 x 125.8 x 43.1 mm)
17 feet RG-58/U (GSM lead)17 feet RG-58/U (WiFi/WiMAX lead)
17 feet RG-174/U (GPS lead)
SMA Plug (Male) standard*
Environmental Specifi cationsOperating / Storage
temperature Weight Humidity Fluid Shower
-40°C to +85°C 1.96 lbs31.9 oz 95% Water, salt, mist, windshield wiper
fl uid, detergent with wax: no degradation
GPS-TMG-RCVR232 GPS-TMG-RCVR422 Timing antenna (does not include mounting hardware).
GPS-TMG-RCVR232NLM GPS-TMG-RCVR422NLM Timing antenna includes L-bracket mount (GPS-TMG-LMNT)
GPS-TMG-RCVR232NCB GPS-TMG-RCVR422NCB Timing antenna includes heavy duty mount (GPS-TMG-HDMNT)
Model NumbersAll mounting options fit pipes of 1”-1.45” (25 mm-37 mm) maximum diameter.
RS232 Interface Models RS422 Interface Models Description
1575.42 +/- 10 MHz 4 dBic (Quadrifiliar Helix)
Right hand circular(RHCP)
Antenna SpecificationsFrequency Band Antenna Gain Polarization
5.0” H x 3.2” D (126 H x 81 mm)
7.5” L x 4.4” W x 3.8” D (190 L x 112 x 96 mm)
0.6 lbs (0.3 kg)
1.9 lbs (0.9 kg) White
8-pin circularconnector conforming
IEC 60130-9.v3.0
Mechanical SpecificationsAntenna Dimen-
sions Shipping Dimensions Antenna Weight Shipping Weight Radome Color Connector
- 40°C to + 85°C 95% IP67
Environmental SpecificationsOperating Temperature Humidity Ingress Protection
Integrated GPS antenna and receiver in one rugged housingQuadrifiliar helix element for optimal coverage and multipath rejectionEmbedded low noise amplifier with preselector and interstage filter for minimizing interferenceLow power consumption (500 mW typical)Input voltage 8-12 V Surge suppression IEC61000-4-5:1995
•••
•••
PCTEL, Inc. WEB: www.antenna.pctel.com
GPS TIMING ANTENNA WITH INTEGRATED RECEIVER
GPS Timing Antenna with Receiver (top); bottom view (inset)
L1 (1575.42 MHz) frequency, C/A code,12-channel,
continuous tracking receiver NMEA@ 1 Hz
Horizontal: <3 m (50%), <8 m (90%)Altitude: <10 m (50%), <16 m (90%)
PPS (static): ± 50 nanoseconds
Receiver Specifications
General Update Rate Accuracy
Reacquisition: 2 sec typical Hot start: 9 sec typical
Warm Start: 36 sec typicalCold Start: 39 sec typical
Out of the Box: 41 sec typical
Tracking: -150 dBmAcquisition: -142 dBm
TTL-level pulse, once per second
NMEA 0183 v3.0Bi-directional NMEA messages
Messages selectable by NMEA commandsSelection stored in ash memory
RS232 or
RS422 options
Acquisition (Autonomous Operation) Sensitivity PPS Protocols Interface
GPS-TMG-50N, 50 dB Internal Amplifi er
The GPS-TMG-50N timing reference antennas are specifi cally designed for long-lasting, trouble-free deployments in congested cell-site applications.
The proprietary quadrifi liar helix design, coupled with multi-stage fi ltering provides superior out-of-band rejection and lower elevation pattern performance than traditional patch antennas.
Their unique radome shape sheds water and ice, while eliminating problems associated with bird perching. The antenna can be purchased by itself, or with pipe mounting hardware. Custom models or site kit options are also available.
Low Noise Amplifier Specifications Frequency Band (MHz):
1575.42 ±10 MHz 3 dB bandwidth
Ampli er Gain:50 dB ± 3 dB
Nominal Impedance:50 ohms
Output VSWR:< 2.0:1
Noise Figure:≤ 2.0 dB @ 25°C2.5 dB maximum over temperature range
DC Voltage:5 V Nominal, 3.5-28 V operating
DC Current:37 mA typical. 45 mA max @ 5V
Filtering:3 fi lters with pre-selector
Out-of-Band Rejection:-60 dB @ ±50 MHz off center
ESD and Transit Voltage Protection:input/output
GPS-TMG-50N
1575.42 +/- 10 MHz (GPS L1)
3.5 dBic 50 ohms ≤ 1.5:1 Right hand circular
N, female (one -
bottom fed)
Antenna Electrical SpecificationsFrequency
BandAntenna
GainNominal
Impedance VSWR Polarization Connector
3.7” H x 3.1” D (94 H x 78 mm)
7.5” L x 4.4” W x 3.8” D (190 x 112 x 96 mm)
.36 lbs (.16 kg)
1.9 lbs (0.9 kg) Off-white
Mechanical SpecificationsAntenna
DimensionsShipping
DimensionsAntenna Weight
ShippingWeight
Radome Color
-40°C to +85°C Up to 95%
Environmental SpecificationsTemperature Range Humidity
GPS-TMG-50N Does not include mounting hardware.
GPS-TMG-50NCS Includes matching white plastic mounting base.
GPS-TMG-50NMS Includes standard mounting hardware (collar bracket, L-bracket and pipe clamps).
GPS-TMG-MRNMNT Marine mount.
MountingAll mounting options t pipes of 1”-1.45” (25 mm-37 mm) maximum diameter.
Model Options
PCTEL, Inc. WEB: www.antenna.pctel.com
GPS/AVIATION SPECIAL PURPOSE ANTENNASGPS Timing Reference Antennas
PCTEL, Inc. WEB: www.antenna.pctel.com
GPS/AVIATION SPECIAL PURPOSE ANTENNASGPS Timing Reference Antennas
GPS-TMG-SP-40N, 40 dB Internal Amplifi er with Integrated Lighting Protection
The GPS-TMG-SP-40N timing reference antennas are specifi cally designed for long-lasting, trouble-free deployments in congested cell-site applications. The low noise, high gain amplifi er is well suited to address attenuation issues associated with applications requiring longer cable runs.
The proprietary quadrifi liar helix design, coupled with multistage fi ltering provides superior out-of-band rejection and lower elevation pattern performance than traditional patch antennas.
Their unique radome shape sheds water and ice, while eliminating problems associated with bird perching. The antenna may be purchased by itself or with pipe mounting hardware. Custom models or site kits options are also available.
This antenna is made of materials that fully comply with provisions stipulated by EU directives RoHS 2002/95/EC.
The antenna provides integrated lighting protection capability.
The antenna also features ESD, reverse polarity protection and transitvoltage suppression.
Low Noise Amplifier Specifications Frequency Band:
1575.42 +/-12 MHz
Ampli er Gain: 40 dB +/- 3 dB
Nominal Impedance: 50 ohms
Output VSWR: <2.0:1
Maximum Noise Figure: < 2.5 dB @ +25°C including pre-selector
DC Voltage: 3.3-9.0 V
DC Current: < 40 mA
Filtering: 3 stage fi ltering including pre-selector
Out of Band Rejection: ≥ -60 dB @ +/- 50 MHz off center frequency
Lightening Protection: 90 V, 20 kA, 8/20 mS
1575.42 +/- 10 MHz 3.5 dBic 50 ohms <1.5:1 Right hand
circular
N, female (one -
bottom fed)
Antenna Electrical SpecificationsFrequency
BandAntenna
GainNominal
Impedance VSWR Polarization Connector
7.25” H x 3.2” D (184 x 81 mm)
7.5” L x 4.4” W x 3.8” D (190 x 112 x 96 mm)
0.75 lbs (0.34 kg) White
Mechanical SpecificationsAntenna
DimensionsShipping
DimensionsAntenna Weight
Radome Color
-40°C to +85°C 95%
Environmental SpecificationsTemperature Range Humidity
GPS-TMG-SP-40N Does not include mounting hardware.
GPS-TMG-SP-40NLM Includes standard mounting hardware consisting of pipe clamp (part #39A000).
GPS-TMG-SPS-40NCB Includes heavy duty mount (part #19-9199-1).
GPS-TMG-SP-40N
19-9199-1 mount
39A000
MountingAll mounting options t pipes of 1”-1.45” (25 mm-37 mm) maximum diameter.
Model Options
40 dB GPS L1/GLONASSL1/GALILEO E1 Timing Antenna with Integrated Lightning Protection
The GPSL1GL-TMG-SP-40NCB timing reference antennas are specifi cally designed for long-lasting, trouble-free deployments in congested cell-site applications. The low noise, high gain amplifi er is well suited to address attenuation issues associated with applications requiring longer cable runs.
The proprietary quadrifi liar helix design, coupled with multistage fi ltering provides superior out-of-band rejection and lower elevation pattern performance than traditional patch antennas.
Their unique radome shape sheds water and ice, while eliminating problems associated with bird perching. The antenna may be purchased by itself or with pipe mounting hardware. Custom models or site kits options are also available.
This antenna is made of materials that fully comply with provisions stipulated by EU directives RoHS 2002/95/EC.
The antenna provides integrated lightning protection capability.
The antenna also features ESD, reverse polarity protection and transitvoltage suppression.
Low Noise Amplifi er Specifi cations Frequency Band:
1590 ± 30 MHz
LNA Gain: GPSL1 40 dB (typical)GLONASS L1 38 dB (typical)GALILEO L1 40 dB (typical)
Nominal Impedance: 50 ohms
Output VSWR: <2.0:1
Maximum Noise Figure: < 2.5 dB @ +25°C including pre-selector
DC Voltage: 3.3-9.0 V
DC Current: < 40 mA
Filtering: 3 stage fi ltering including pre-selector
Out of Band Rejection: ≥ -60 dB @ f ≤ 1530 MHz ≥ -60 dB @ f ≥ 1660 MHz
Lightening Protection: 90 V, 20 kA, 8/20 μS
1575.42 ± 10 MHz1602-1615 MHz
3.5 dBic 3.5 dBic 50 ohms <1.5:1 Right hand
circular
N, female (one -
bottom fed)
Antenna Electrical Specifi cations
FrequencyBand
Antenna Element
Gain (Nominal)
NominalImpedance VSWR Polarization Connector
7.25” H x 3.2” D (184 x 81 mm)
7.5” L x 4.4” W x 3.8” D (190 x 112 x 96 mm)
0.75 lbs (0.34 kg) White
Mechanical Specifi cationsAntenna
DimensionsShipping
DimensionsAntenna Weight
Radome Color
-40°C to +85°C 95%
Environmental Specifi cationsTemperature Range Humidity
GPSL1GL-TMG-SP-40NCB Includes heavy duty mount (part #19-9199-1).
MountingAll mounting options fi t pipes of 1”-1.45” (25 mm-37 mm) maximum diameter.
Model Options
PCTEL, Inc. WEB: www.antenna.pctel.com
GPS/AVIATION SPECIAL PURPOSE ANTENNASGPS Timing Reference Antennas
IP67
PCTEL, Inc. WEB: www.antenna.pctel.com
GPS/AVIATION SPECIAL PURPOSE ANTENNASGPS Timing Reference Antennas
The GPS-TMG-40 timing reference antennas are specifi cally designed for long-lasting, trouble-free deployments in congested cell-site applications. Their 40 dB high gain amplifi er is well suited to address attenuation issues associated with applications requiring longer cable runs.
The proprietary quadrifi liar helix design, coupled with multi-stage fi ltering provides superior out-of-band rejection and lower elevation pattern performance than traditional patch antennas.
Their unique radome shape sheds water and ice, while eliminating problems associated with bird perching. The antenna may be purchased by itself or with pipe mounting hardware. Custom models or site kits options are also available.
This antenna is made of materials that fully comply with provisions stipulated by EU directives RoHS 2002/95/EC.
This antenna also features ESD, reverse polarity protection and transit voltage suppression.
GPS-TMG-40N, 40 dB Internal Amplifi er
Low Noise Amplifier Specifications Frequency Band (MHz):
1575.42 +/- 12 MHz
Ampli er Gain:40 dB +/- 3
Nominal Impedance:50 ohms
Output VSWR:< 2.0:1
Maximum Noise Figure:< 2.5 dB @ +25°C
DC Voltage:3.3-9.0 V
DC Current:≤ 40 mA
Filtering:3 stage fi ltering including pre-selector
Bandwidth:≥ 60 dB @ +/- 50 MHz off center frequency
GPS-TMG-40N
1575.42 +/- 10 MHz 3.5 dBic 50 ohms ≤ 1.5:1 Right hand
circular
N, female (one -
bottom fed)
Antenna Electrical SpecificationsFrequency
BandAntenna
GainNominal
Impedance VSWR Polarization Connector
5.0” H x 3.2” D (126 H x 81 mm)
7.5” L x 4.4” W x 3.8” D (190 x 112 x 96 mm)
0.6 lbs (0.3 kg)
1.9 lbs (0.9 kg) White
Mechanical SpecificationsAntenna
DimensionsShipping
DimensionsAntenna Weight
ShippingWeight
Radome Color
- 40°C to + 85°C 95%
Environmental SpecificationsTemperature Range Humidity
GPS-TMG-40N Does not include mounting hardware.
GPS-TMG-40NMS Includes standard mounting hardware consisting of collar (part #540438A000) and pipe clamp (part #39A000).
GPS-TMG-40NCS Includes economy collar mount (part #13315-1).
GPS-TMG-MRMNT Marine mount.
MountingAll mounting options t pipes of 1”-1.45” (25 mm-37 mm) maximum diameter.
Model Options
PCTEL, Inc. WEB: www.antenna.pctel.com
GPS/AVIATION SPECIAL PURPOSE ANTENNASGPS Timing Reference Antennas
GPS-TMG-26N
Low Noise Amplifier Specifications Frequency Band (MHz):
1575.42 +/- 10 MHz
Ampli er Gain:26 dB +/- 3
Nominal Impedance:50 ohms
Output VSWR:< 2.0:1
Maximum Noise Figure:≤ 2.5 dB @ +25°C including pre-selector
DC Voltage:3.3- 9.0 V (regulated)
DC Current:≤ 40 mA
Filtering:3 stage fi ltering including pre-selector
Bandwidth:≥ 60 dB @ +/- 50 MHz off center frequency
GPS-TMG-26N, 26 dB Internal Amplifi er
GPS-TMG-26N Does not include mounting hardware.
GPS-TMG-26NMS Includes universal mounting hardware consisting of collar mount and L-Bracket mount.
GPS-TMG-26NCS Includes economy collar mount (part #13315-1).
GPS-TMG-MRNMNT Marine mount.
MountingAll mounting options t pipes of 1”-1.45” (25 mm-37 mm) maximum diameter.
Model Options
1575.42 +/- 10 MHz 3.5 dBic 50 ohms ≤1.5:1 Right hand
circularN, female (one - bottom fed)
Antenna Electrical SpecificationsFrequency
BandAntenna
GainNominal
Impedance VSWR Polarization Connector
5.0” H x 3.2” D (126 H x 81 mm)
7.5” L x 4.4” W x 3.8” D (190 L x 112 x 96 mm)
0.6 lbs (0.3 kg)
1.9 lbs (0.9 kg) White
Mechanical SpecificationsAntenna
DimensionsShipping
DimensionsAntenna Weight
ShippingWeight
Radome Color
- 40°C to + 85°C 95%
Environmental SpecificationsTemperature Range Humidity
The GPS-TMG-26 timing reference antennas feature a 26 dB amplifi er specifi cally designed to support long-lasting, trouble-free deployments in congested cell-site applications.
The proprietary quadrifi liar helix design, coupled with multi-stage fi ltering provides superior out-of-band rejection and lower elevation pattern performance than traditional patch antennas.
Their unique radome shape sheds water and ice, while eliminating problems associated with bird perching. The antenna may be purchased by itself or with pipe mounting hardware. Custom models or site kits options are also available.
This antenna is made of materials that fully comply with provisions stipulated by EU directives RoHS 2002/95/EC.
PCTEL, Inc. WEB: www.antenna.pctel.com
GPS-TMG-20N, 20 dB Internal Amplifi er
The GPS-TMG-20 timing reference antennas are specifi cally designed for long-lasting, trouble-free deployments in congested cell-site applications. Their 20 dB high gain amplifi er is well suited to address attenuation issues associated with applications requiring longer cable runs.
The proprietary quadrifi liar helix design, coupled with multistage fi ltering provides superior out-of-band rejection and lower elevation pattern performance than traditional patch antennas.
Their unique radome shape sheds water and ice, while eliminating problems associated with bird perching. The antenna may be purchased by itself or with pipe mounting hardware. Custom models or site kits options are also available.
This antenna is made of materials that fully comply with provisions stipulated by EU directives RoHS 2002/95/EC.
This antenna also features ESD, reverse polarity protection and transit voltage suppression.
GPS/AVIATION SPECIAL PURPOSE ANTENNASGPS Timing Reference Antennas
GPS-TMG-20N
Low Noise Amplifier Specifications Frequency Band:
1575.42 center frequency3 dB bandwidth +/- 10 MHz
Ampli er Gain: 20 dB +/- 3 dB
Nominal Impedance: 50 ohms
Output VSWR: < 2.0:1
Maximum Noise Figure: ≤ 2.5 dB @ +25°C including pre-selector
DC Voltage: 3.3 - 9.0 V (regulated)
DC Current: 20 mA, 30 mA max @ 5V
Polarization: Right hand circular
Filtering: 3 stage fi lters including pre-selector
Out of band rejection: -60 dB @ 1575.42 +/- 50 MHz
1575.42 +/- 10 MHz 3.5 dBic 50 ohms < 1.5:1 Right hand circular
Antenna Electrical SpecificationsFrequency
BandAntenna
GainNominal
Impedance VSWR Polarization
5” H x 3.2” D (126 H x 81 mm)
7.5” L x 4.4” W x 3.8” D (190 x 112 x 96 mm)
0.6 lbs (0.3 kg)
1.9 lbs (0.9 kg) White
Mechanical SpecificationsAntenna
DimensionsShipping
DimensionsAntenna Weight
ShippingWeight
Radome Color
- 40°C to + 85°C 95%
Environmental SpecificationsTemperature Range Humidity
GPS-TMG-20N Does not include mounting hardware.
GPS-TMG-20NMS Includes universal mounting hardware consisting of collar (part #540438A000) and pipe clamp (part #39A000).
GPS-TMG-20NCS Includes economy collar mount (part #13315-1).
GPS-TMG-MRNMNT Marine mount.
Model Options
N, female (one - bottom fed)• ESD protected• Reverse polarity protection• Transient voltage suppression on output
Connector Input/Output
MountingAll mounting options t pipes of 1”-1.45” (25 mm-37 mm) maximum diameter.