Upload
vantu
View
214
Download
1
Embed Size (px)
Citation preview
2
Notes1) Refer to individual specification sheet or the drawing for the details of a product.2) Main units of this catalog are shown in SI (MPa, ℃, millimeter) and inch, psig., F゚.3) Refer to the attached P-T ratings about applicable pressure and temperature.4) Teflon is Du Pont's tradename.
Products guaranteeTerm of a guarantee: Within one year after the date of delivery from our factory to the original customer.Contents of a guarantee: If the installations and the service conditions (such as pressure, temperature, fluid, etc.)are proper, necessary replacement and repair of our product will be carried out without charge.Guarantee exceptions: Please keep in mind that the above articles of guarantee will not apply to the case owing tothe following reasons:1) Non-compliance of the customer with the technical instructions furnished by our catalog and specification sheet2) Natural disaster incidents, such as a fire, flood damage, an earthquake, and falling stone3) Reconstruction or repair by any third party other than Toyo Valve Co., Ltd.4) Deterioration (such as shot rust, degradation, chemical changes, etc.)5) Any other matter resulting from the damage not being regarded as manufacturer's responsibility
In addition, you will be required necessary charge for repair or exchange of parts on failure or damage by theguarantee exceptions. Please contact our sales staff or agency for the details.
The specification and the performance term of our product indicated in this catalog are based on the internationallygoverned standards and specifications, our products experience or the design calculation and our in-houseexamination.
When using the product beyond the service conditions mentioned in this catalog, users are required to consult oursales staff or agency for further advice in advance, or to conduct the verification or evaluation for the performanceunder users' responsibility. We shall not be liable for any damages resulting from lack of aforementionedprocedures by the customer.
* Don't use our products in flammable or toxic gas service.
* Items mentioned in this catalog are subject to change without prior notice to the customers.
TOYO VALVE CO., LTD., CHINO PLANT, JAPAN
ISO 9001 & ISO 14001 authorized
We, as an integrated valve manufacturer with more than 80-years' history and tradition, have remodeled ourChino plant to the commitment to the environment by unifying the Suwa plant into the Chino plant, our latestmother production base for bronze, brass, cast iron, ductile iron, stainless steel, cast & forged steel valves.We remain committed to deliver high quality products and service that all customers are willing to accept.
Toyo_P2_15.qx 08.5.7 4:53 PM ページ 2
3
GasketGland packingBody materialShell thicknessEnd connectionsF-F dimensionP-T ratingsClassSeries
-Non-asbestosSCS13A/CF8JV 8-1
Screwed:JIS B 0203Flanged:JIS B 2220
Screwed:JV 8-1Flanged: JIS B 2002
Toyo standard180℃ max. oil, gas, air, water-1.0MPa
10KGateGlobeCheck
PTFEPTFE/FKM "O"-ring
SCS13A/CF8SCS14A/CF8MToyo standardJIS B 0203
Toyo standard38℃ oil, gas, air, water-5.5MPaSaturated steam 1.0MPa
800Ball
-PTFEToyo standard38℃ oil, gas, air, water-4.10MPaSaturated steam 1.0MPa
600Ball
R-PTFE-SCS13A/CF8JV 8-2
Screwed:JIS B 0203Flanged:JIS B 2220
JV 8-2JV 8-2
Screwed: 20K
Flanged:10K
Strainer
Non-asbestosNon-asbestosSCS13A/CF8ASME B16.34JIS B 2220ASME B16.10JIS B 2220 Note: 110KGateGlobeCheck
Non-asbestos (Joint sheet)
Non-asbestosSCS13A/CF8SCS14A/CF8MASME B16.34
JIS B 2220ASME B16.10 (Expect strainers)
JIS B 2220 Note: 110KGate
GlobeCheck(swing, lift)Strainer Note: 3
Non-asbestos (Spiral wound)20K
Non-asbestos (Joint sheet)ASME B16.5ASME B16.34 Note: 1
150
Non-asbestos (Spiral wound)300
-Non-asbestosfor bypass valve
SCS13
JV 8-1
Wafer typeJIS B 2220JV 8-1
(Except40 & 350mmAPI 594)
NBR seat:80℃ max. oil, air, water-1.0MPaJV 8-1
10KwithBy-passvalve
Rubber seatNBREPDMFKM NBR seat:
80℃ max. oil, air, water-2.0MPa
20KwithBy-passvalve
--
API 600ASME B16.34
10K
Metal seat20K
--Wafer typeASME B16.5
150
300
PTFE seatsPTFESCS13A/CF8
ASME B16.34
JIS B 0203Toyo standard
JV 8-1
10KBall
PTFE
SCS13SCS13A/CF8SCS14
SCS14A/CF8M
JIS B 2220JIS B 2002JV 8-1
10K
Ball R-PTFE/PFACopolymer seats
20K
ASME B16.15ASME B16.10ASME B16.34150
300
-Non-asbestosSCS13A/CF8JV 9JV 8-1
Wafer typeJIS B 2220(10K,16K, 20K)ASME B16.15(125, 150)
JIS B 2002 Series 46
PTFE seat:120℃ max. water, oil, gas-1.0MPa (160℃ max)
10KHighperform-ance
Metal seat:200℃ max. water, oil, gas-1.0MPaSaturated steam 1.2MPa(300℃ max)
Notes:1) Although the pressure-temperature ratings for the valve body of V-series and VN-series are mentioned in the above table, the highest working temperature of the standard packing, made of non-asbestos, is 260℃ max. However, since it is necessary to consider separately about type of gland packing and gasket depending on operating conditions (fluid, pressure, and temperature), please consult our sales staff or agency for details.2) The standard gasket of 10K and Class 150 V-series gate, globe and check (swing, lift) valves is non-asbestos sheet. Moreover, V#7020 (Reinforced Teflon sheet/ R-PTFE) is available upon request.3) The standard gasket of Strainer is V#7020 (Reinforced Teflon/R-PTFE).4) Do not use our products in flammable or toxic gas service.
Butterfly Valves
Flanged
Screwed
Dual Plate Check Valves
VN-Series
( )
V-Series
U-Series
Design Specification
Toyo_P2_15.qx 08.5.7 4:53 PM ページ 3
4
U-SeriesStainless Steel Valves
TOYO StandardDesignGlobe ValvesGate ValvesType
10KClass
830800J800802J802Fig.D1HLD1HLD1HLD1HLD1HLSize
63112555555
7373
4448
1 / 4"3 / 8"
810
637090
115117143
658090
637090
115116142
8595110
556370
7397104
526072
707080
103109120
8595100
707080
100105116
545865
1 / 2"3 / 4"1"
152025
90100110
150173189
105120140
90100110
150173189
130150180
809090
125141152
8090100
809090
132170187
110125140
809090
129148165
747887
11 / 4"11 / 2"2"
324050
SCS13ASCS13ASCS13ASCS13ASCS13ABodyMaterial SUS304/Chrome platedSUS304/Chrome platedSUS304/Chrome platedSUS304/Chrome platedSUS304/Chrome platedStem
PTFESUS304SUS304SCS13ASCS13ADisc1.0MPa (150psi) WOG, WSP, non-shocktemperature less than 180゜ C (356゜ F)See P-T rating on page 12
Service conditions
PTFE seatRemarks
TOYO StandardDesignStrainersSwing Check ValvesGlobe ValvesType
10KClass
809J809804J804830JFig.HLHLHLHLD1HLSize
1 / 4"3 / 8"
810
8091109
120130150
606577
85100115
455561
8595110
455561
658090
637090
115117143
8595110
1 / 2"3 / 4"1"
152025
132145174
170190220
90100115
135150180
717281
130150180
717281
105120140
90100110
150173189
130150180
11 / 4"11 / 2"2"
324050
SCS13ABodySCS13ABodySCS13ABodyMaterial SUS304ScreenSUS304PinSUS304/Chrome platedStem
SCS13ADiscPTFEDisc1.0MPa (150psi) WOG, WSP, non-shocktemperature less than 180゜ C (356゜ F)See P-T rating on page 12
Service conditions
40 meshes screenPTFE seatRemarks
(mm)
(mm)
H
L
D1
H
L
D1
H
L
H
L L
H
Toyo_P2_15.qx 08.5.7 4:53 PM ページ 4
5
U-SeriesStainless Steel Valves
TOYO StandardDesignBall ValvesType
800600Class
Std. boreReduced boreReduced boreReduced boreReduced bore45804550W4550A3550W3550Fig.
D1HLdD1HLdD1HLdD1HLdD1HLdSize3940
2529
39 44
4.56.8
6070
3136
39 44
4.56.8
3940
2529
39 44
4.56.8
6070
3136
39 44
4.56.8
1 / 4"3 / 8"
810
100100130
505560
607080
101520
5555
3539
56.559
9.212.5
8585100
414448
56.559 71
9.212.516.0
5555
3539
56.559
9.212.5
8585100
414448
56.559 71
9.212.516.0
1 / 2"3 / 4"1"
152025
130150150
647379
95108124
253238
100125125
546572
78 83 100
20.024.532.0
100125125
546572
78 83 100
20.024.532.0
11 / 4"11 / 2"2"
324050
SCS14ASCS14ASCS14ASCS13ASCS13ABody
MaterialSUS316/Chrome platedSUS316SUS316SUS304SUS304StemSUS316 or SCS14SUS316SUS316SUS304 or SUS316SUS304 or SUS316Ball
R-PTFER-PTFER-PTFER-PTFER-PTFESeat5.5MPa (800psi) WOG, non-shock1.0MPa (150psi) Saturated steam
4.1MPa (600psi) WOG, non-shock1.0MPa (150psi) Saturated steam
Service conditions
Remarks
TOYO StandardDesignBall ValvesType
10K800Class
Full boreFull boreStd. bore30604760A3380Fig.
D1HLdD1HLdD1HLdSize
130716210
1 / 4"3 / 8"
810
130130160
102105124
658090
152025
100130130
556063
677489
152025
100100120
697277
607080
101520
1 / 2"3 / 4"1"
152025
160230230
130115120
110120140
324050
150150200
7278105
106118129
323850
130130150
9095103
90100120
253240
11 / 4"11 / 2"2"
324050
SCS13ASCS14ASCS13ABody
MaterialSUS304SUS316/Chrome platedSUS304/Chrome platedStemSUS304SUS316SUS304BallPTFER-PTFER-PTFESeat
1.0MPa (150psi) WOG, WSP, non-shocktemperature less than 180゜ C (356゜ F)
5.5MPa (800psi) WOG, non-shock0.5MPa (70psi) Saturated steam
5.5MPa (800psi) WOG, non-shock1.0MPa (150psi) Saturated steam
Service conditions
Remarks
(mm)
(mm)
H
L
D1
H
L
D1
Toyo_P2_15.qx 08.5.7 4:53 PM ページ 5
6
High Performance Double Off-Set Butterfly ValvesHIGH FLOW®-T/H Series
Standard SpecificationHIGH FLOW ®-H (Metal seat)HIGH FLOW ®-T (Teflon® seat)Type
583 (10K)584 (20K)
585 (Class150)
580 (10K)581 (20K)
582 (Class150)Fig.
JIS 10K/16K/20K, ASME 125/150BS 4504 PN10/16, DIN PN10/16Mating flange
JIS B2002 series 46 / ISO 5752 Basic Series 20End-to-end dimensionJPI-7S-83, API 609, JV-9 Class 150 (See page 12)Pressure-Temperature Rating
2.0 MPaMaximum service pressure
Reverse pressure (pressure from stem side) :1.0 MPaDisc side to Stem side *1Flow direction
Wafer typeBody type-29℃ ~538℃-29℃ ~232℃Service temperature
Design pressure x 1.5Shell (Water)Test pres. Air : 0.6 MPa (Optional test : Design pressure x 1.1 in water)Seat
JIS B2003 rate 2 *2Tight shutoffAllowable leakageSCS 13ABody
MaterialSCS 13A (Chrome plated)SCS 13ADisc
SUS 304StemSUS 316LPTFE / R-PTFESeat ring
Flexible GraphiteFlexible Graphite with Teflon®Gland packingLever, worm gear, air cylinder, motorActuator type
Steam, emissions gas *4, air, industrial water, food, oil, powder *3, grain *3Applicable mediaRemarks : *1. Regardless flow pressure, Disc side should be pressurized in the normal direction of the flow.
*2. Zero leakage is available upon request. Please consult our sales staff or agency.*3. For some media, this valve cannot be used depending on some operating condition.*4. Don't use our products in flammable or toxic gas service.
Fig. 583-G (10K, SCS13A body, SUS316L seat)Fig. 584-G (20K, SCS13A body, SUS316L seat)Fig. 585-G (Class 150, SCS13A body, SUS316L seat)
Fig. 580-G (10K, SCS13A body, Teflon® seat)Fig. 581-G (20K, SCS13A body, Teflon® seat)Fig. 582-G (Class 150, SCS13A body, Teflon® seat)
(mm)
ActuatorNo.D1SL1H4H3H2H1Ldsize
W11110
1554245
206224231243
170188195207
88101108120
43464652
50657999
506580100 W12
W2271298321
235252275
145167189
565660
126148190
125150200
W20160W3
2001786757W40371
401325351
232262
6878
239288
250300 W53002609068
O�
S�
L1
1
S
D4
d
L
FLOW
H
3H2H
1H
Toyo_P2_15.qx 08.5.7 4:53 PM ページ 6
7
Flanged Ball Valves
TOYO StandardDesignBall ValvesType
15010KClass
4131L3131L3011L(SCS13A)/4011L(SCS14A)Fig.D1HD1HLdD1HD1HLdD1HLdSize
130130160
102105124
108117127
152025
130130160
102105124
108117127
152025
130130160
818493
108117127
152025
1 / 2"3 / 4"1"
152025
230230
115120
165178
4050
230230
115120
165178
4050
160230230
97113120
140165178
324050
11 / 4"11 / 2"2"
324050
400400460
155165200
190203229
6580100
400400460
155165200
190203229
6580100
400400460
150161189
190203229
6580100
21 / 2"3"4"
6580100
310310360
467492594
46010001500
220295355
356394457
125150200
310310360
467492594
46010001500
220295355
356394457
125150200
4609801970
209262317
356394457
125150200
5"6"8"
125150200
SCS14A/CF8MCF8SCS13A/SCS14ABody
MaterialSUS316/F316F304SUS304/SUS316Stem
SUS316 or SCS14A/F316 or CF8MF304 or CF8SCS13/SCS14BallR-PTFE/PFA CopolymerR-PTFE/PFA CopolymerR-PTFESeat
See P-T rating on page 14Service conditions
Full boreRemarks
(mm)
(Gear : 4131G)(3131G)
TOYO StandardDesignBall ValvesType20K/300Class
4331L(20K)/4231L(300)3331L(20K)/3231L(300)Fig.D1HD1HLdD1HD1HLdSize
130130160
102105124
140152165
152025
130130160
102105124
140152165
152025
1 / 2"3 / 4"1"
152025
160230230
128115120
178190216
324050
160230230
128115120
178190216
324050
11 / 4"11 / 2"2"
324050
400400750
155165240
241283305
6580100
400400750
155165240
241283305
6580100
21 / 2"3"4"
6580100
310360
492594
75010001500
260295355
381403502
125150200
310360
492594
75010001500
260295355
381403502
125150200
5"6"8"
125150200
SCS14A/CF8MSCS13A/CF8Body
MaterialSUS316/F316SUS304/F304Stem
SUS316 or SCS14A/F316 or CF8MSUS304 or SCS13A/F304 or CF8BallR-PTFE/PFA CopolymerR-PTFE/PFA CopolymerSeat
See P-T rating on page 14Service conditions
Full boreRemarks
(mm)
(Gear : 4331G/4231G)(Gear : 3331G/3231G)
H
L
D1D1
L
H
Toyo_P2_15.qx 08.5.7 4:53 PM ページ 7
8
V-Series / VN-SeriesStainless Steel Valves
ASME B16.34JPI-7S-58 / API 603DesignGate ValvesType
20K/30010K/15010KClass
863J(20K)/863(300)813J(20K)/813(300)853J(10K)/853(150)803(150)803JFig.D1HLD1HLD1HLD1HLD1HLSize100100140
216225250
140152165
100100140
216225250
140152165
100100100
214214227
108117127
100100100
214214227
108117127
100100100
206212232
108117127
1 / 2"3 / 4"1"
152025
160160200
300308333
178190216
160160200
300308333
178190216
140140160
257264308
140165178
140140160
257264308
140165178
140140160
259277312
140165178
11 / 4"11 / 2"2"
324050
200250300
378433537
241283305
200250300
378433537
241283305
180200224
357417508
190203229
180200224
357417508
190203229
180200230
366433510
190203229
21 / 2"3"4"
6580100
355400450
658758950
381403419
355400450
658758950
381403419
280300355
619728923
254267292
280300355
619728923
254267292
250250300
620709915
254267292
5"6"8"
125150200
560600
11381329
457502
560600
11381329
457502
400450550
111713171650
330356381
400450550
111713171650
330356381
360110933010"12"14"
250300350
SCS14A/CF8MSCS13A/CF8SCS14A/CF8MSCS13A/CF8SCS13ABodyMaterial SUS316/F316SUS304/F304SUS316/F316SUS304/F304SUS304Stem
SCS14A/CF8MSCS13A/CF8SCS14A/CF8MSCS13A/CF8SCS13ADisc10K/20K: See P-T rating for JIS flanged valves on page 13Class 150/300: See P-T rating for ASME flanged valves on page 13
Service conditions
Remarks
(mm)
ASME B16.34JPI-7S-58DesignGlobe ValvesType
20K/30010K/15010KClass
861J(20K)/861(300)811J(20K)/811(300)851J(10K)/851(150)801(150)801JFig.D1HLD1HLD1HLD1HLD1HLSize100140140
181208208
152178203
100140140
181208208
152178203
100100100
176178180
108117127
100100100
176178180
108117127
100100100
198198198
108117127
1 / 2"3 / 4"1"
152025
160160180
237237285
216229267
160160180
237237285
216229267
140140160
206206237
140165203
140140160
206206237
140165203
140140160
223223259
140165203
11 / 4"11 / 2"2"
324050
224250355
328370445
292318356
224250355
328370445
292318356
180200250
280321365
216241292
180200250
280321365
216241292
180200250
290324367
216241292
21 / 2"3"4"
6580100
400450450
495554630
400444559
400450450
495554630
400444559
250355450
414488610
356406495
250355450
414488610
356406495
250355450
443487610
356406495
5"6"8"
125150200
SCS14A/CF8MSCS13A/CF8SCS14A/CF8MSCS13A/CF8SCS13A/CF8BodyMaterial SUS316/F316SUS304/F304SUS316/F316SUS304/F304SUS304/F304Stem
SUS316 or SCS14A/F316 or CF8MSUS304 or SCS13A/F304 or CF8SUS316 or SCS14A/F316 or CF8MSUS304 or SCS13A/F304 or CF8SUS304 or SCS13A/F304 or CF8Disc10K/20K: See P-T rating for JIS flanged valves on page 13Class 150/300: See P-T rating for ASME flanged valves on page 13
Service conditions
Remarks
(mm)
H
L
D1
H
L
D1
Toyo_P2_15.qx 08.5.7 4:53 PM ページ 8
9
V-Series / VN-SeriesStainless Steel Valves
TOYO StandardJPI-7S-58TOYO StandardDesignSwing Check ValvesGlobe with PTFE seatType
20K/30010K/15010K10KClass
865J(20K)/865(300)815J(20K)/815(300)855J(10K)/855(150)805(150)805J831J(SCS13A)/881J(SCS14A)Fig.HLHLHLHLHLD1HLSize
100100100
176178180
108117127
1 / 2"3 / 4"1"
152025
162167
241267
162167
241267
117117
165203
117117
165203
129129
165203
140140160
211211237
140165203
11 / 4"11 / 2"2"
324050
175180214
292318356
175180214
292318356
138144165
216241292
138144165
216241292
145152172
216241292
180200250
280321365
216241292
21 / 2"3"4"
6580100
235278325
400444533
235278325
400444533
186209266
330356495
186209266
330356495
198270309
330356495
250355450
414488610
356406495
5"6"8"
125150200
395494
622711
395494
622711
303356
622698
303356
622698
35662210"12"
250300
SCS14A/CF8MSCS13A/CF8SCS14A/CF8MSCS13A/CF8SCS13A/CF8SCS13A/SCS14ABodyBodyMaterial SUS316/F316SUS304/F304SUS316/F316SUS304/F304SUS304/F304SUS304/SUS316StemPin
SUS316 or SCS14A/F316 or CF8MSUS304 or SCS13A/F304 or CF8SUS316 or SCS14A/F316 or CF8MSUS304 or SCS13A/F304 or CF8SUS304 or SCS13A/F304 or CF8PTFEDiscDisc10K/20K: See P-T rating for JIS flanged valves on page 13Class 150/300: See P-T rating for ASME flanged valves on page 13
Service conditions
Remarks
(mm)
TOYO StandardJPI-7S-58DesignLift Check ValvesType
20K/30010K/150Class
884J(20K)/884(300)834J(20K)/834(300)874J(20K)/874(300)824J(10K)/824(150)Fig.HLHLHLHLSize738484
152178203
738484
152178203
646667
108117127
646667
108117127
1 / 2"3 / 4"1"
152025
103103
216229
103103
216229
828295
140165203
828295
140165203
11 / 4"11 / 2"2"
324050
SCS14A/CF8MSCS13A/CF8SCS14A/CF8MSCS13A/CF8BodyMaterial SUS316 or SCS14A/F316 or CF8MSUS304 or SCS13A/F304 or CF8SUS316 or SCS14A/F316 or CF8MSUS304 or SCS13A/F304 or CF8Disc
10K/20K: See P-T rating for JIS flanged valves on page 13Class 150/300: See P-T rating for ASME flanged valves on page 13
Service conditions
Remarks
(mm)
L
H
H
L
Toyo_P2_15.qx 08.5.7 4:53 PM ページ 9
10
Dual Plate Check ValvesStrainers
TOYO StandardDesignDual Plate Check ValvesType
20K/30010K/15020K10KClass
816M(20K)/816MW(300)806M(10K)/806MW(150)816806Fig.DLDLD1HLD1HLSize
1016086101
6060
6363
118126
5460
6363
118126
5460
11 / 2"2"
4050
121137162
677373
121131156
677373
636363
134138151
677373
636363
134138151
677373
21 / 2"3"4"
6580100
197235279
8698127
187217267
8698127
707070
174188215
8698127
707070
174188215
8698127
5"6"8"
125150200
353403447
146181222
336375420
146181184
8080
254282
146181
8080
254282
146181
10"12"14"
250300350
507572627
232264292
483538593
191203219
16"18"20"
400450500
SCS13/CF8SCS13/CF8SCS13SCS13BodyMaterial SCS13/CF8SCS13/CF8SCS13SCS13Plate
304 (Matal)304 (Matal)NBRNBRSeatSee P-T rating on page 15Service conditions
Metal seated, without bypass valveSCS14/CF8M body available upon requestRemarks
(mm)
TOYO StandardDesignStrainersType10K/150Class
857J(10K)/857(150)807J(10K)/807(150)Fig.HLHLSize
668080
125140160
668080
125140160
1 / 2"3 / 4"1"
152025
110110135
180190220
110110135
180190220
11 / 4"11 / 2"2"
324050
195220260
270290350
195220260
270290350
21 / 2"3"4"
6580100
265315375
390440540
265315375
390440540
5"6"8"
125150200
49068049068010"250SCS14A/CF8MSCS13A/CF8Body
MaterialSUS316/F316SUS304/F304Screen
10K/20K: See P-T rating for JIS flanged valves on page 13Class 150/300: See P-T rating for ASME flanged valves on page 13
Service conditions
Screen 40 MeshRemarks
(mm)
L
D L
H
D1L
H
Toyo_P2_15.qx 08.5.8 1:02 PM ページ 10
11
Corrosion Resistance Guide
FluidFluid
○○○○○△Copper nitrate○×△×○○Aseton
○○○△○△Sodium nitrate○○○△△△Sulfurous acid gas (Dried)
○○×△○△Nickel nitrate○○△×○○Sulfur
○○△△○○Mercury○○○△○○Whisky
○○××△△Stearic acid○×××○○Ether
○○×○△△Petroleum○○○○○△Potassium chloride
○○-○△△Carbonic acid○○○○○△Calcium chloride
○○○○○△Potassium carbonate○○△△○×Stannous chloride
○○○○○△Sodium thiosulfate○○○○△△Sodium chloride
○○×○○○Turpentine oil○○○△○△Potassium chlorate
○○××△△Trichloroethylene○△×△○○Oleic acid
○○××○○Naphtha○-××○△Sodium perchlorate
○○××○○Naphtenic acid○○△×○△Hydrogen peroxide
○○○△○△Lactic acid○○△×○△Sodium peroxide
-○--○△Urea○○△△○○Potassium permanganate
○-×○○○Paraffin○×△×○△Formic acid
○○××○△Picric acid○○○○○△Citric acid
○○○×○○Beer (Brewery)○○○○○○Glycerin
○○××○○Phenol○○××○△Creosote
○△××○○Benzene (Benzol)○○××○△Chlorobenzene
○×○×○○Formaldehyde○△××○○Chloroform (Dried)
○○×△○△Maleic acid○△○△○○Acetic acid (10%)
○○○○○△Milk○△○△○△Acetic acid (30%)
○×△×○△Acetic anhydride○×○×○△Acetic acid (less than 50%)
○×○△○○Methanol○×△×○△Amyl acetate
○○○×△△Potassium iodide○×△×○△Copper acetate
○△○×△△Butyric acid○△○×△△Lead acetate
○△○×○△Hydrogen sulfide (Wetting)○○○×△△Copper cyanide
-○○△△×Sulfuric acid (20%)○○○○△△Potassium cyanide
○○○△○△Aluminum sulfate○○○×△△Potassium bichromate
○×○○○△Ammonium sulfate△×○×○○Steam (100℃)
○-○○○-Malic acid○○△△○△Nitric acid (10%)
○:Excellent△:Poor but able to be used under some conditions×:Unsatisfactory-:Data unavailable
○△○○○○Ammonium nitrate
○○○○△△Potassium nitrate
○○△×△△Silver nitrate
○○○△○△Ferric nitrate
SCS13A
SUS304/CF8
SCS14A
SUS316/CF8M
NBR
EPDM
FKM
PTFE
SCS13A
SUS304/CF8
SCS14A
SUS316/CF8M
NBR
EPDM
FKM
PTFE
To be used as a guide only
Toyo_P2_15.qx 08.5.7 4:53 PM ページ 11
12
Pressure-Temperature Ratings
U-Series Stainless Steel Valves
■Gate, Globe, and Check Valves / screwed & flanged ends
U-Series Stainless Steel Valves
■Ball Valves / screwed end type � Fig. 3550(W), 4550A(W), 4580, 3380, 4760A or 3060
High Performance Butterfly Valves
Class 10KMPa psi1.4�1.1�1.0�2.1�0.6
Less than 120℃�Less than 150℃�Less than 180℃�
Air, oil, gas, �steam
shell waterseat air
200�160�143�300�80
Service conditions
Test pressure
Static water
Class 800WOG 10KMPa psi MPa psi
1.0�8.3�0.6
Saturated steamshell waterseat air
150�1200�80
1.0�2.1�0.6
150�300�80
Service conditions
Test pressure
Water, oil , gas 5.5 800 1.4 200
0.6
1.2
0
0.2
0.4
0.8
1.0
1.4(MPa)�
100
(℃)�
Temperature(℃/ F゚)�
Temperature(℃/ F゚)�
250200150100500-50
-100 0 32 100 200 300 400 500( F゚)�
4003002001000-100-200-300 ( F゚)�
�0
Pressure(MPa/psi)�
Pressure(MPa/psi)�
0
3.0
6.0
-200 -100 100 200
1.0
2.0
4.0
5.0
7.0
(℃)�
1.4
1.0
Static water
Air, gas, oil, water
←-29 ←180
←-196
200
(psi)� (MPa)�1000
5.5
4.1
800
600
400
20010K1.4
0
(psi)�
←-29
Class800
Class600
600WOGMPa psi
1.0�6.2�0.6
150�900�80
4.1 600
* Do not use our products in flammable or toxic gas service.* Do not use our products in flammable or toxic gas service.
Temperature (゚ C/ F゚)
��
Pressure (MPa/Psi)
0
0 100 200 300 400 500 600 700 800 900 1000
ー500
0.5
1.0
1.51.5
2.0
(MPa)(Psi)300
200
100
050 100 150 200 250 300 350 400 450 500
53835023220017738ー10ー29
0.14
1.4
1.75
550
Upper limit of metal seat��
Upper limit of Teflon seat ��
Please contact our sales staff or �distributor for service under the �lower temperature below -10℃. ��
SCS 13A Body
FCD-S Body
(゚ C)
( F゚)
Pres
V-Serie
■ASME
Serv
(℃
Tespress
Note: (1) For w
-29 -393149204260316343371399427454482510538566593621649677704732760788816
V-Serie
■JIS Fl
Notes: 1) The restric
2) In cagland
3) Do no
NominBodybe
Temperature
Toyo_P2_15.qx 08.5.7 4:53 PM ページ 12
13
Pressure-Temperature Ratings
V-Series Stainless Steel Valves
■ASME B16.34 Table 2-2.1A & 2-2.2A
Service temperatureClass 150
A351 Gr. CF8(SCS13A)�A351 Gr. CF8M(SCS14A)�A351 Gr. CF8(SCS13A)� A351 Gr. CF8M(SCS14A) Class 300
(℃)� ( F゚)� MPa psi MPa psi MPa psi MPa psi
Test�pressure
Note: �(1) For welding end valves only. Flanged ends ratings terminate at 1000°F.
shell(water) 2.93 425 2.93 425 7.58 1100 7.58 1100seat(air)� 0.55 80 0.55 80 0.55 80 0.55 80
-29 -38�93�149�204�260�316�343�371�399�427�454�482�510�538�566�593�621�649�677�704�732�760�788�816
-20 -100�200�300�400�500�600�650�700�750�800�850�900�950�1000�1050�1100�1150�1200�1250�1300�1350�1400�1450�1500
1.90�1.62�1.41�1.24�1.17�0.965�0.862�0.758�0.655�0.552�0.448�0.345�0.241�0.138�0.138(1)�0.138(1)�0.138(1)�0.138(1)�0.138(1)�0.138(1)�0.138(1)�0.138(1)�0.103(1)�0.069(1)�
275�230�205�190�170�140�125�110�95�80�65�50�35�20�20(1)�20(1)�20(1)�20(1)�20(1)�20(1)�20(1)�20(1)�15(1)�10(1)�
1.90�1.65�1.48�1.34�1.90�0.965�0.862�0.758�0.655�0.552�0.448�0.345�0.241�0.138�0.138(1)�0.138(1)�0.138(1)�0.138(1)�0.138(1)�0.138(1)�0.138(1)�0.138(1)�0.138(1)�0.138(1)�
275�235�215�195�170�140�125�110�95�80�65�50�35�20�20(1)�20(1)�20(1)�20(1)�20(1)�20(1)�20(1)�20(1)�20(1)�20(1)�
4.96�4.14�3.65�3.24�3.00�2.86�2.83�2.79�2.76�2.72�2.69�2.65�2.59�2.24�2.14�1.79�1.34�1.07�0.758�0.586�0.414�0.345�0.241�0.172
720�600�540�495�465�435�430�425�415�405�395�390�380�320�―�255�200�155�115�85�60�50�35�25
4.96�4.27�3.86�3.55�3.31�3.10�3.07�2.96�2.93�2.86�2.79�2.72�2.65�2.52�2.48�2.24�1.90�1.41�1.240�0.965�0.724�0.517�0.414�0.276
720�620�560�515�480�450�445�430�425�420�420�415�385�350�345�305�235�185�145�115�95�75�60�40
V-Series / VN-Series Stainless Steel Valves
■JIS Flanged Valves
Notes: �1) The max. working temperature for standard products is restricted to 260℃ by gland packing, gasket or material.�
2) In case of use at 260℃ and above, applicable selection for gland packing & gasket is required.�
3) Do not use our products in flammable or toxic gas service.
Nominal pressure�Body materialbelow 120℃�220℃�300℃�350℃�400℃�425℃��
10K�SCS13A, SCS14A�
1.4�1.2�1.0�-�-�-�
20K�SCS13A, SCS14A�
3.4�3.1�2.9�2.6�2.3�2.0
Temperature
Pressure(MPa)�
(MPa)�
0
1.4
1.2
1.0
2.0
3.1
2.9
2.6
2.3
3.53.4
-50 0 120 220260300 350 400 450
425
Temperature(℃)�
10K Type
1)�
-29
20K Type�SCS13A, SCS14A 20K Type�
SCS13A, SCS14A
Toyo_P2_15.qx 08.5.7 4:53 PM ページ 13
14
1000 7.0
6.0
5.0
4.0
3.0
2.0
1.0
800
600
400
200
0
Pressure(MPa/psi)�
(MPa)�(psi)�
0
0 100 200 300 400 500 ( F゚)�
50 100 150 200 250 (℃)�
Temperature(℃/ F゚)�
SIZE 200A
1000 7.0
6.0
5.0
4.0
3.0
2.0
1.0
800
600
400
200
0
Pressure(MPa/psi)�
(MPa)�(psi)�
0
0 100 200 300 400 500 ( F゚)�
50 100 150 200 250 (℃)�
Temperature(℃/ F゚)�
SIZE 80 & 100A
1000 7.0
6.0
5.0
4.0
3.0
2.0
1.0
800
600
400
200
0
Pressure(MPa/psi)�
(MPa)�(psi)�
0
0 100 200 300 400 500 ( F゚)�
50 100 150 200 250 (℃)�
Temperature(℃/ F゚)�
SIZE 125 & 150A
Pressure-Temperature Ratings
10/20K, Class 150/300 Stainless Steel Flanged Ball Valves
�
�
1000 7.0
6.0
5.0
4.0
3.0
2.0
1.0
800
600
400
200
0
Pressure(MPa/psi)�
(MPa)�(psi)�
0
0 100 200 300 400 500 ( F゚)�
50 100 150 200 250 (℃)�
Temperature(℃/ F゚)�
SIZE 15 & 20A
1000 7.0
6.0
5.0
4.0
3.0
2.0
1.0
800
600
400
200
0
Pressure(MPa/psi)�
(MPa)�(psi)�
0
0 100 200 300 400 500 ( F゚)�
50 100 150 200 250 (℃)�
Temperature(℃/ F゚)�
SIZE 25~65A
300 Body rating
CF8 (SCS13A)
20K Body rating
Seat rating (R-PTFE)
Seat rating (PTFE)
CF8M (SCS14A)
CF8M (SCS14A)
CF8 (SCS13A)
150 Body rating
10K Body rating
Seat rating (R-PTFE)
Seat rating (PTFE)
300 Body rating
CF8 (SCS13A)
20K Body rating
CF8M (SCS14A)
CF8M (SCS14A)
CF8 (SCS13A)
150 Body rating
10K Body rating
Seat rating (R-PTFE)
CF8 (SCS13A)
CF8M (SCS14A)
CF8M (SCS14A)
300 Body rating
Seat rating (PTFE)
20K Body rating
150 Body rating
10K Body rating
CF8 (SCS13A)
300 Body rating
20K Body rating
Seat rating (PTFE)
150 Body rating
10K Body rating
CF8 (SCS13A)
Seat rating (R-PTFE)
CF8M (SCS14A)
CF8M (SCS14A)
CF8 (SCS13A)
300 Body rating
Seat rating(R-PTFE)
20K Body rating
Seat rating (PTFE)
150 Body rating
10K Body rating
CF8 (SCS13A)
CF8M (SCS14A)
CF8M (SCS14A)
CF8 (SCS13A)
Pres
Note: An
Fig. 806
Service co
Static w
Oil,wate
Test pres
Dual Pl
■Rubbe
Note: An
Fig. 816
Service co
Static w
Oil,wate
Test pres
Toyo_P2_15.qx 08.5.7 4:53 PM ページ 14
15
Pressure-Temperature Ratings
Note: An EPDM seat shall not be used for all oil application.
Ratings 10K
Fig. 806M(10K) and 816M(20K)Fig. 806, 10K
20KMPa psi MPa psi1.4�1.2�2.1�0.6
below 120℃�above 220℃�shell waterseat air
200�170�300� 80
483�441�725� 80
3.4�3.1�5.0�0.6
Service conditions
Test pressure
Static water�Oil,gas,water,air
FPM EPDMMPa psi MPa psi1.4�―�1.0�1.0�2.1�0.6
below 80℃�above 120℃�below 80℃�above 120℃�shell waterseat air
Service conditions
Seat material
200�―�170�170�300� 80
1.4�1.4�1.0�1.0�2.1�0.6
200�200�170�170�300� 80
NBRMPa psi1.4�―�1.0�―�2.1�0.6
200�―�170�―�300� 80
Static water
Oil,water,air
Test pressure Note:�1) Standard products are designed up to 150℃.�2) In case of use at 150℃ & above, please consult us. �3) Do not use our products in flammable or toxic gas service. �
Fig. 806MW(150) and 816MW(300) �Please refer to table for ASME B16.34. �
Note:�1) Standard products are designed up to 150℃.�2) In case of use at 150℃ & above, please consult us. �3) Do not use our products in flammable or toxic gas service.
Dual Plate Check Valves
■Rubber Seat(With Bypass-Valve) ■Metal Seat(Without Bypass-Valve)
Note: An EPDM seat shall not be used for all oil applications.
Fig. 816, 20K
FPM EPDMMPa psi MPa psi3.4�―�2.6�2.0�5.0�0.6
below 80℃�above 120℃�below 80℃�above 120℃�shell waterseat air
Service conditions
Seat material
483�―�370�285�725� 80
3.4�3.4�2.6�2.0�5.0�0.6
483�483�370�285�725� 80
NBRMPa psi3.4�―�2.6�―�5.0�0.6
483�―�370�―�725� 80
Static water
Oil,water,air
Test pressure
Toyo_P2_15.qx 08.5.7 4:53 PM ページ 15
Y-450=02
T0805(SE)
TT-2 BLDG., 8-1, 3-CHOME, NIHONBASHI-NINGYOCHO, CHUO-KU, TOKYO 103-0013, JAPANhttp://www.toyovalve.co.jp
1-10-1, Nakase, Mihama-ku, Chiba 261-8577, JapanInternational Sales Dept. Phone:81-43-299-1730, 1732 and 1733
Fax:81-43-299-0121
Distributed by : Manufactured by :
Sold by :
ISO9001 and 14001 authorized
Toyo Valve Co., Ltd. has been approved by Lloyd's Register Quality Assurance Limited (LRQA) tothe following quality management system of“ISO 9001”and environmental management system of“ISO 14001”.
ISO9001 ISO14001
Toyo_H1_4 08.5.7 4:51 PM ページ 1