• Little to No vibration

• Installs with Portable Equipment

• Fully Adjustable Lifting

• High Performance

• Engineer Designed and Tested

• High Load Capacity

• Can Penetrate Obstructions

Benefits:

ECPECPECPECP

The ECP Model 350MP allows you to install a pre-engineered steel underpinning bracket for your next foundation repair project using Hollow Bar Micropiles. This unique, patent pending, design was developed to make use of Micropiles for underpinning with the advantage of an engineer designed bracketing system. This new design is especially effective where other foundation repair systems fail due to debris, or extremely hard rock/soil layers. Micropiles in combina-tion with the ECP Model 350MP system, will penetrate deeply through debris, rock layers and cobbles while supporting the structure. When used in conjunction with portable drillings systems, such as the TEI MP-250, Hollow Bar Micropiles can be installed in basements, low overhead areas and other limited access areas to help stabilize structures with a deep foundation system. So if your foundation stabilization project calls for a high strength, deep foundation in obstructed soils and an engineered bracketing system, the ECP Model 350MP can solve your problem.

ECPECP Model 350MP Model 350MP

T h e M i c r o p i l e B r a c k e t

CPECCPE P1-866-327-0007

EARTHEARTHCONTACTCONTACTPRODUCTSPRODUCTS15612 S Keeler Terr. Olathe, Ks 66062 Phone:913-393-0007 Fax:913-393-0008info@earthcontactproducts.comwww.EarthContactProducts.com

ECPECPECPECPECPECP Model 350MP Model 350MP

CPECCPE P1-866-327-0007

EARTHEARTHCONTACTCONTACTPRODUCTSPRODUCTS15612 S Keeler Terr. Olathe, Ks 66062 Phone:913-393-0007 Fax:913-393-0008info@earthcontactproducts.comwww.EarthContactProducts.com

Benefits of the Micro Pier System: • Bracket is a pre-engineered and pre-tested product • Capacity ratings of 75,000-99,000 lbs • Quickly Installs to the TEI Drill Rig MP-250 • Intregrated Manifold Lift Design • Minimal Site Preparation • Installs in Low Head Room Areas or Limited Access Areas • System Handles Difficult Ground Conditions • Easily Load Tested to Verify Capacity • Designed to Transfer Load to the Full Length of the Pile • Cost Effective due to ease of operation and design

9/16" DIA.4 HOLES

9 7/8"

13"

4" DIA. x 0.220 WaPIER SLEEVE x 4 2LONG

3-1/2" DIA. x 0.165WALL PIER PIPE

8"

18 1/2"

7 1/2"

4-1/2" PIER OFFSET

14"

AFTER LIFT

BEFORE LIFT

4" STD. LIFT

SLEEVE LOCATERPINModel 350-MP2 Micro

Pile Bracket Detail

GROUTCOLUMN

CONTINUOUSLYADJUSTABLE BRACKET LIFTROD

COUPLINGPIER SLEEVE3'-6" LONG WITHCOLLAR

SUITABLE LOAD BEARING ROCK SACRIFICIAL

DRILL BIT

HOLLOWMICROPILESHAFT

MODEL 350 PIER BRACKET

FACE PLATE

PIER CAP

12"

14"

Model 350-MP2 –Typical Micro Pile Application Drawing

UNLIMITED LIFT WITH LONGERBRACKET RODS