Upload
eliomar-rivas
View
874
Download
13
Tags:
Embed Size (px)
Citation preview
S.No. COMMANDS
Common
ENHANCE CE COL RED
REMOVE ALL ADD CE
ALP REQ CLEAR ($S CLS = ALP REQ CLEAR)
Q NAME
ADD ALL WITHIN VOL CE 400
BY N100 WRT /*
Q USER
Q POS WRT/* or Q WORPOS
Q DESP
MARK CE
UNMARK ALL
AXES AT CE
AXES OFF
Q LIST
FINISH
SAVEWORK
QUIT
Q ATT
Q ORI
Q POS
Q POS WRT /*
CHOOSE ALL
STATUS
$Q
MOVE U THR IDP@
MOVE U CLEAR 0 INF IDP@
DRAG MOVE S DIST 1000
DRAG AT E 3000
DRAG MOVE E 3000
NEW ZONE /(zone name) COPY PREV REN /(renamed zone name)
$R6 / $R
$M XYZ.TXT
Q SPREF
Q REF
DIR N 45 E
ORI and P3 is U
Equipment
Q MATREF
Q DESP
VAR 1 NAME
VAR 2 WORPOS
AIS TEXT '$V1' AT $V2
new zone /sa-v21010a copy prev ren /sa-v21010 /sa-v21010a
new bend copy prev conn dir u
q att (select bend)
Q DDNM
Q LOHE
Q ANGL
BACK
THRO ID@
THRO NEXT
CHOOS ALL
GOTO CATREF
PREC OUT DI 4 DEC
STATUS
$Q
EXTEND START THR IDPL@
EXTEND START 100
MOV U THR IDP@
MOV U CLEAR 0 INF IDP@
NEW SCTN COPY PREV BY dir dim WRT /*
BOP EL#P1BOPU+
Q DTXR
DRAG MOVE S DIST 1000
DRAG AT E 3000
DRAG MOVE E 3000
$M XYZ.TXT
Q BRWEI
Piping
ADD ALL PIPE WITHIN VOL CE 500
ADD ALL PANEL WITHIN VOL CE 300
ADD ALL WITHIN VOL CE 400
CONN
Q DTXR
AXES AT PT
AXES AT PH
ADD ALL PIPE WITH MATCHWILD(NAME,'*577037*') COL2
Q MATREF
Q DESP
Q MTXX
Q PATOP
Q PA BOP
Q HDIR
Q TDIR
ADD HREF
ADD TREF
ADD HREF TREF
HPOSI E……N…………U………. WRT /*
VAR 1 NAME
VAR 2 WORPOS
AIS TEXT '$V1' AT $V2
new bend copy prev conn dir u
q att (select bend)
Q DDNM
AT CREF
ADD CREF
CONNECT BWD
Q ANGL
NEW ELBO CHOOSE
DIR TO NEXT
FLIP
BACK
THRO CREF
THRO ID@
THRO NEXT
CREF ID@
CHOOS ALL
NEW TEE CHOOS ALL
GOTO CATREF
Q TUCL
Q MTCL
INCLUDE ID BRANCH @
PREC OUT DI 4 DEC
FCONN
Q TPOS
Q HPOS
STATUS
$Q
Q DTXR
Q MTXX
DRAG MOVE S DIST 1000
DRAG AT E 3000
DRAG MOVE E 3000
ORI AND P3 IS TO IDP@
Q BRWEI
NEW TEE CHOOS ALL
Q SPREF
Q DESP
CH CE
Q SPEC OF BRAN
Q SPEC OF SPREF
Q HBORE
Q TBORE
Q DXTR
Q ISPEC (ex: ISPEC ADD or ISPEC REMOVE)
Q PSPE
Structural
Q POSS WRT /*
Q POSE WRT /*
Q PARA
Q BANG
Q NWEI
Q GWEI
Q GCOF
Q CUTLEN
Q SPEC OF SPREF
REPR HOLES ON UPDATE - REPR HOLES OFF UPDATE
Q HEIG
Q NXTR
DESCRIPTION
Common
Add current element with red colour
Remove all Hierar
Clear the Screen (CLS = short command of clear the screen)
Query Name
If you put it at Branch level, all elements around the branch will be displayed.
The current element will move 100 mm in North direction
Query the User name
Querry position of the element w.r.t world
To knowthe Parameter of the Element
Display the temporary label for forward and backward direction of a branch
Clear the temporary label for forward and backward direction of a branch
Axis at the Origin point
Origin point axis removes from the screen
Query List
Save and Quit
save the current design, draft modules
quits the PDMS and not saving
QUERY THE ATTRIBUTES
QUERY THE ORIENTATION
QUERY THE POSITION WRT TO OWNER
QUERY THE POSITION WRT TO WORLD
All the available types of that particular components will be listed
Will give us the list of DBs and and the access rights for the User & Module
To Querry the list of commands available
Moving UP thro the Identification Point locating by mouse
Moving UP thro the Identification Point locating by mouse infront of the IDP with 0 dimension
The current element and the constrained network are moved south by the specified distance.
The current element and the constrained network will be dragged to the specified position.
The current element and the constrained network will be moved to the specified position.
Create SITE/ZONE/STRU/EQUI/PIPE etc.,
The contents of the text file will be loaded in the attributes of the specified element
Specification Reference
Query the Reference
To change direction of the piping component
To change the direction of P3 of a Tee to U
Type this in command line. After if clich any content in the PDMS menu, the programme will run in the command line. To cancel the $R6, typr $R.
Equipment
TO KNOW MATERIAL SPEC
TO KNOW THE PARAMETER OF THE EQUIPMENT
TO MARK THE COMPONENT NAME
For copying a existing bend to new bend
Edit the radius and bend angle
To Querry the thickness of panel
To find the angle of the component
To change the direction from Forward to Backward
Place it at the place, where it has been selected by Mouse click
Place it at the next component
All the available types of that particular components will be listed
Go to Catalogue Reference
To get 4 Decemal precision on Co-ordinate values.
Will give us the list of DBs and and the access rights for the User & Module
To Querry the list of commands available
To get detailed description of a component
The current element and the constrained network are moved south by the specified distance.
The current element and the constrained network will be dragged to the specified position.
The current element and the constrained network will be moved to the specified position.
The contents of the text file will be loaded in the attributes of the specified element
To get the weight of the selected component
Piping
If you put it at Branch level, all pipe elements around the branch will be displayed.
If you put it at Branch level, all panel elements around the branch will be displayed.
If you put it at Branch level, all elements around the branch will be displayed.
Current element will get connected.
To know the Tail point
To know the Head point
To query the Material Specification
To query the Design Parameter of the Equipment
To query the Material of the component
To query the Top of the Pipe co-ordinates
To query the Bottom of the Pipe co-ordinates
To query the Head direction
To query the Tail direction
TO ADD PIPE ATTACHED TO HEAD OF CURRENT BRANCH
TO ADD PIPE ATTACHED TO TAIL
To add PIPE attached to both HEAD and TAIL of current branch
To change the position of head WRT to WORLD
To mark the component name
For copying a existing bend to new bend
Edit the radius and bend angle
Keep it at CREF
Add Connected Reference item
To connect backward
To find the angle of the component
To create a new elbow
To move the component in the direction of next componenet
To rotate w.r.t its own axis
To change the direction from Forward to Backward
Place it at CREF
Place it at the place, where it has been selected by Mouse click
Place it at the next component
Be at the place, click the item to be included as CREF
All the available types of that particular components will be listed
New Tee can be created from the list of all types of Tee for that spec.
Go to Catalogue Reference
To find out the length of Branch
To find out the length of Branch
To move a branch from one line to another line
To get 4 Decemal precision on Co-ordinate values.
Forced connection
Query Tail Position
Query Head Posion
Will give us the list of DBs and and the access rights for the User & Module
To Querry the list of commands available
To get detailed description of a component
To get material of construction of a piping element
The current element and the constrained network are moved south by the specified distance.
The current element and the constrained network will be dragged to the specified position.
The current element and the constrained network will be moved to the specified position.
TO ORIENTATE THE LEAVE POINT OF TEE TO THE REQUIRED DESIGN ELEMENT
To get the weight of the selected component
New Tee can be created from the list of all types of Tee for that spec.
Specification Reference
Query the Design Parameter
To check the Data Inconsistency
Query the Specification of Piping branch
Query the Specification reference of Piping branch
Query the head bore details of the branch component
Query the tail bore details of the branch component
Query the description of the component
Query the requirement of the Insulation
Query the Piping Specification
Structural
Start point of SCTN
End point of SCTN
Query the Parameter of Profile (ie thickness of flange, web etc..)
Query the BETA angle
Query the Net Weight of the SCTN
Query the Net Weight of the SCTN
Query SCTN , members etc.,
Query the length of the SCTN
Query the Specification reference of SCTN
Graphic update for holes
Height of the panel
Query the Negative Extrusion
S.No. COMMANDS
General
Q USER
Q LIST
FINISH
SAVEWORK
QUIT
Q ATT
Q NAME
REPEAT BY X+100
NEW SYMB COPY ID@
NEW RECT COPY ID@
INCLUDE ID@
Q IDLNAME
#PIPE(P2:)(C2:)
Pltxt #PIPE(C2:)(P2:) BOP EL#P1BOPU+
Pltxt #PIPE(C2:)(P2:) WP EL#DIMPOSU+
PREC OUT DI 4 DEC
Btext '#PIPE(P2:)(C2:) WP EL#P1POSU+'
NEW SYMB COPY $V1
STATUS
$Q
BOP EL#P1BOPU+
Btext '#PIPE(C2:)(P2:) WP EL#P1POSU+'
NLPEN
LENGth
RADius
ADEGrees
CHEIght
DMTxt
PLTxt
FONt
SPREAD LOCAL
SPREAD REMOTE
~C #<#POSU #/#PIPE(C2:)#>
~D #<#POSU #/#PIPE(C2:)#>'
DESCRIPTION
General
Query the User name
Query List
(SAVE AND QUIT)
save the current design, draft modules
quits the PDMS and not saving
QUERY THE ATTRIBUTES
TO KNOW NAME OF ELEMENT
Be at DRAFT, 2D Draft; create new & place at x+100 distance.
Be at DRAFT, 2D Draft; create new symbol by copying the existing one.
Be at DRAFT, 2D Draft; create new rectangle by copying the existing one.
To change labels from REF-DRW to User-Notes in DRAFT; Be at V-note which is
Be at Draft; at a View / VSEC level
In Draft, to reduce the line numbers and branch numbers this command is used in TEXT CONTENTS.
To get 4 Decemal precision on Co-ordinate values.
in draft copy local symbol one dwg to another dwg
Will give us the list of DBs and and the access rights for the User & Module
To Querry the list of commands available
To change the property of the element
To change the length of the element
to change the radius of the circle, arc, etc
To change the angle of the element
To change the height of the text element
To change the dimension text
To change the projection text
To change the font
FOR SYMBOLIC LABELLING
Centerline
Dia Symbol