hdp

pdp

p-cam-dock

cam-dock

• universal use for different tester types (e.g. ETS-364, Nextest Magnum HV, HD etc.) internal ring: 7´´ center ring: 9´´ external ring: 11´´• up to 1,280 pins for each ring (up to a total of 3,840 pins)• various types of adapter rings available

probe tower triton

probe tower J750

• available with different pogo pin modules on customer demand standard: 1,496 pins xt: 1,904 pins full: 2,992 pins• compatible to existing pogo towers

Technical alterations are subject to change without prior notice.© esmo AG 2011

probe tower flex modular

• 360 / 900 / 1,080 / 1,320 / 1,620 / 2,070 pins• 18 pin modules with 90 signal pins, and 10 pin modules with 45 signal pins• pin modules can be added/removed on customer demand• applications spaces: 224 cm² and 114 cm²• fully compatible to existing pogo towers

• universal use for different tester types (e.g. LTX X series etc.)• designed with standardized units/dimensions for easy assembly/maintenance, and flexible arrangement/use• pin arrangement allows for standard “pseudo” 50 Ohm • signal pins (each signal pin is surrounded by 4 grounds)• fully compatible with existing pogo towers

probe tower midas

• standard 9” tower for Teradyne Catalyst• utilises 576 coax signal pins w. 576 grounds / 246 utility pins • fully compatible with existing pogo towers - “plug and play” • versions for lower pin counts, different probe card sizes, and RF options available on request

probe tower catalyst

• allows easy hand test for prober applications• hinged carrier for probe card• easy positioning for probe tower• mounted onto test head stiffener• linear pin compression

manual test adapter (mta)

dib-changing system (manual)

• cost-effective solution for easy and convenient handling• time savings due to special setup• for easy board and socket height change• specialized for DUT up handler

• hinged probe tower carrier and clamping mechanisms• easy change of probe cards for top load prober• hinged probe tower• easy probe card positioning• linear pin compression

clamp shell

• quick and easy board change in 40 seconds• test head and handler stay mechanically connected during board change process• clever and thoughtful design - one-button operation• highest repeatability due to statically defined test head positioning - high locking force by easy positioning• contact force fully compensated by locking system• full automation feasible

dib-changing system (automatic)

• pin pull-in concept• one-step pre-alignment and pre-lock• no radial forces on docking pin• no twist force between handler and prober side• axially symmetric pin, easy z-adjustment

pin-dock

• special design for test heads with automatic board • locking mechanism (i.e. Teradyne FLEX family, inner pull-down)• cost-efficient solution incl. pre-guide, pre-fix, or k-dock adapter

pib-lock

• fine pitch guiding, no docking mechanism required• easy and precise docking – high accuracy and repeatability due to statically defined position• high docking force (from esmo manipulator)• available in combination with neptune compact and pallas manipulator

hinge-dock

• cost-effective docking solution - for universal and versatile use - requiring lower operator efforts at high interface loads• pneumatic (p-cam-dock) or mechanical (cam-dock) • designed for excellent repeatability and very low interface height during controlled docking movements• high planarity and stability • compatible with existing solutions - no requirement of standardization and re-training

cam-dock/ p-cam-dock

• pre-fix set• guide pins for various test heads• k-dock adapter• fully compatible to existing dockings

universal docking plate (udp)

• universal engineering tool for easy and convenient handling/positioning: 1D: z-axis 2D: x-, y-axis 3D: x-, y-, z-axis• various board positions with handler contactors for all types of tester/handler configurations

• various pc (probe card) or lb (load board) stiffeners for different test heads• cost-efficient and maintenance-free

pc / lb stiffener

docking accessories

• available for all types of test heads, handlers, probers as: tdp (tester docking plate) hdp (handler docking plate) pdp (prober docking plate) • full access to contact site• compatible with various existing systems

docking plate