Upload
julio-cesar-talledo-de-lama
View
243
Download
0
Embed Size (px)
Citation preview
7/28/2019 PEHJ0040-02(P3)- NGEC
1/2
Cat NGECTM
Recommended UseCat NGEC Premix 50/50 is a heavy-duty cooling system fluid especially designed
to provide superior protection against pitting, freezing, and corrosion in Caterpillar
Natural Gas Engines. It protects all metals including aluminum.
NGEC does not require a treatment with a supplemental coolant additive at initial
fill. NGEC does require a treatment with a supplemental coolant additive on a
maintenance basis.
Discover the DifferenceCat NGEC is developed, tested and approved by Caterpillar to meet the same high
standards as Genuine Cat Parts.
Fully FormulatedDoes not require an initial supplemental cooling additive. Quick,
easy servicing.
Superior ProtectionContains both organic and inorganic corrosion inhibitors as
well as antifoam additives. Provides superior protection against pitting, corrosion
and freezing down to 37 C (34 F).
Natural Gas Engine Coolant for Cat natural gas engines. Premix 50/50
7/28/2019 PEHJ0040-02(P3)- NGEC
2/2
Uncompromised Performance and Life
Cat NGEC is premixed 50 percent with deionized water, which eliminates the following risks:
Unacceptable use of hard water or contaminated water
Improper ratio of concentrate to water, not thoroughly stirring the concentrate and water
Mixing the concentrate in a dirty or contaminated container
Pouring the concentrate and water separately into the radiator without mixing them first
SOSSM Services for early problem detection
Protect your investment with Cat SOS oil analysis, the ultimate detection and diagnostic
tool for your equipment. We recommend SOS Level 1 Coolant Analysis according to the
engines Operation and Maintenance Manual, or Level 2 Coolant Analysis annually for all
your Cat equipment.
Cat Filters: Complete protection for your engine
Combine Cat Fluids with Cat Filters for the highest level of contamination control and
protection for your machine. We recommend Cat Filters for all Cat engine applications.
Cat NGEC
PEHJ0040-02
www.cat.com
2007 Caterpillar All Rights Reserved Printed in USA
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well ascorporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
CAT DEALERS DEFINE WORLD-
CLASS PRODUCT SUPPORT.
We offer you the right parts and service
solutions, when and where you need them.
The Cat Dealer network of highly trained
experts keeps your entire fleet up and running
to maximize your equipment investment.
Health and Safety
For information on proper use for
health, safety, and environment,
please refer to the Material Safety
Data Sheet (MSDS). Read and
understand the MSDS before using
this product. Always observe good
hygiene measures. For a copy of the
MSDS, contact us or visit the web
at www.catmsds.com.
Typical Characteristics*
Appearance Purple
Boiling Protection, with 15 psi pressure cap (ASTM D1177):
50% solution 265 (129)
60% solution (concentrate added) 270 (132)
Freezing Protection, F (C):
50% solution 34 (37)
60% solution (concentrate added) 62 (52)
Ash content, % wt. (ASTM D1119) 0.60
Silicate content SiO2 (ppm) 450-550*The values shown are for the Premix 50/50 solution unless otherwise noted. The values shown are
typical values and should not be used as quality control parameters to accept or reject product.
Values are subject to change without notice.