LAMP CODE DEFINITIONS

Product Power Voltage Color Temp. Fiinish Control

NSL-JD: PWP Large Wallpack Light 90W: 90W135W: 135W 27: AC100-277V 40K: 4000 Kelvin

50K: 5000 Kelvin

B: BlackD: Dark Bronze

W: White

(blank): no controlsP: 110-277VAC photocell

CERTIFICATIONS

Product Abstract:The popular forward throw wall packs are now available with long-lasting, energy-efficient LED technology. Featuring a classic form, this LED wall pack offers a traditional appearance and is powered by advanced LEDs. LED wall pack is powerful yet energy efficient, large size Pelion series are capable of replacing 250W to 400W metal halide while saving up to 80% in energy costs. Offering an expected service life of more than 10 years. The LED eliminates frequent lamp and ballast replacements associated with traditional technologies. LED lighting is also free of environmentally harmful Mercury as well as Halogen chemicals.

Application: Security, pathway and perimeter lighting, building entryways, walkways and much more.

Mounting Height: 15’ to 25’

Led characteristics: • Phillips Lumileds LED, high luminous efficacy and long working life. • 50,000+ hour LED lifespan based on IES LM-80 results and TM-21 calculations. • LED color temperature is warrantied to shift no more than 200K in CCT over a 5-year period • Our range of CCT (Correlated Color Temperature) follows the guidelines of the American

National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2015.

Construction: • Minimum starting temperature is -10˚F • Suitable for use in areas up to 105˚F ambient temperatures • Die-cast aluminum housing with die-cast backbox with four conduit entry points and knockout pattern

for junction box or direct wall mounting. Hinged door for easy re-assembly • Newest light weight design for easy installation, at the same time still with excellent heat dissipation

for longer lifespan • High-temperature silicone gaskets • Ingress Protection rating of IP65 for dust and water • Powder-coat finish formulated for high-durability and long-lasting color • Mercury and UV free. RoHS compliant components. Polyester powder coat finish formulated without

the use of VOC or toxic heavy metals.

Optics: • Prismatic polycarbonate lens UV coated and treated against turning color • Excellent optics design, greatly improve the light utilization and evenness

Type:

Item number:

Note:

MODEL#: NSL-JD-XXXW-27-XXK-X

Specifications:SKU: PWP-90W-27-XXK-X PWP-135W-27-XXK-X Power: 90W 135WInput Voltage: AC100-277VLuminous Flux: 10,800 Lumens 16,200 LumensEfficacy: 120 lm/WPower Factor: 0.921 0.914Driver Efficiency: >90%CCT: 5000K (4000k Option)CRI: 70Total Harmonic Distortion: 9.78% 11.59%LED Brightness Decay: <5%/6,000 hours

Working Life: >50,000 hours

Working Temperature: -10˚F to 105˚F

Protection Level: Wet Location/IP65

Product Size: 17.72” x 9.84” x 8.66”

Packing Size: 19” x 13” x 11”

Net Weight: 11 lbs 11 lbs

Gross Weight: 13.5 lbs 13.5 lbs

DLC Product ID: 50K: PLTG0NG2 50K: PBDDEF5L

40K: PGMVVZOE 40K: PN5L12TE

PELION SERIES LED PC COVER LARGE WALL PACK LIGHT

COMPARISON TABLE

Type Wattage Energy Saving (%) L70 Life SpanPelion Series - 10,800 Lumens 90W -- >50,000 Hours250W Metal Halide 290W 69% 10,000 Hours400W High Pressure Sodium 458W 80% 20,000 HoursPelion Series - 16,200 Lumens 135W -- >50,000 Hours400W Metal Halide 458W 71% 10,000 Hours400W High Pressure Sodium 458W 71% 20,000 Hours

For the most up-to-date specs and warranty information, please visit www.everluxledusa.comEVERLUX LED PWP-90W/PWP-135W

PRODUCT DIMENSIONSt

INSTALLATION INSTRUCTIONt

1. JUNCTION BOX MOUNTING

1. Loosen screws and remove the front lens set care-fully from the back plate.

2. Drill appropriate knockouts (B) for wiring. the fixture supports standard 31/4” -Junction box.

3. Attach the back plate on the wall. use the supplied gaskets for a weather tight seal.

4. Finish wiring (Black for Line. White for Neutral and Green/Yellow Green wire for Ground).

5. Replace the lens on all of the hinges. make connections and close the lens set then tighten the screws.

EVERLUX LED | 150 Executive Drive Unit J, Edgewood, NY 11717Tel: (631) 522-1628 | www.everluxledusa.com

Specifications and dimensions subject to change without notice.MAY 2018

PHOTOMETRIC REPORT

90W 135W

2. CONDUIT MOUNTING

1. Loosen screws and remove the front lens set carefully from the back plate. (See step 1 above)

3. Drilling out the holes (C) to secure it on the wall with choosing proper screws.

5. Replace the lens set on the hinge and finish connection. Close the lens set and tighten the screws to fasten lens set to the back plate

2. Remove 1/2” plug from where you intend to feed conduit.

4. Finishing wiring (Black for line. White for neu tral and Green/Yellow Green for ground). (See step 4 above)