Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com V-DH-1
The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your sales representative for up-to-date product information.
Product Selection Guide
Size and Performance Data ..................................................................................................................................V-DH-2
Features and Options ...........................................................................................................................................V-DH-2
Sound Transmission Class and Outdoor-Indoor Transmission Class .......................................................................V-DH-2
Glazing Performance .......................................................................................................................................................V-DH-4
Grille Types
Grille Patterns .........................................................................................................................................................V-DH-5
Grille Profiles ..........................................................................................................................................................V-DH-5
Standard Traditional Grille Breakpoints .............................................................................................................V-DH-6
Design Data
Special Sizes ...........................................................................................................................................................V-DH-8
1-Wide Vent............................................................................................................................................................V-DH-9
Detailed Product Descriptions .....................................................................................................................................V-DH-11
Unit Sections ..................................................................................................................................................................V-DH-12
3-1/4" Replacement Frame ................................................................................................................................V-DH-12
Pella® 150 Series Double-Hung Window
Pella® 150 Series vinyl window products are intended only for use less than 40 feet above ground level.
Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com V-DH-2
Replacement Frame
Standard High Performance
Sizes
Standard Sizes l l
Frames
Replacement Frame for 3-1/4" Frame Depth l l
Performance 1
Meets or Exceeds AAMA/WDMA RatingsH-R20 − R35
Hallmark Certified
H-R50Hallmark Certified
Air Infiltration (cfm / ft 2 of frame @ 1.57 psf wind pressure.) 0.24 0.24
Design Pressure 20 − 35 psf 50 psf
Water Penetration Resistance 3.0 − 5.25 psf 7.5 psf
Forced Entry Resistance (Minimum Security Grade) 10 10
Maximum Operating Force (lbs) (Initiate Motion / Maintain Motion) 21 21
(—) = Not Available
(1) Published performance data is for single unit only. See Design Data pages in this section for specific product performance class and grade values.
(2) ASTM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration. East Region Only
Sound Transmission Class and Outdoor-Indoor Transmission Class
SeriesFrame Size
Tested 2
Glazing System
STC Rating OITC RatingOverall Glazing
Thickness
Exterior Glass
Thickness
Interior Glass
Thickness
3-1/4" Frame Depth Replacement Double-Hung - Dual Pane Insulating Glass
36" x 60" 3/4" 3.0 mm 3.0 mm 26 22
36" x 60" 3/4" 2.5 mm 2.5 mm 25 22
Size and Performance Data
Pella® 150 Series Double-Hung Window
Pella® 150 Series vinyl window products are intended only for use less than 40 feet above ground level.
Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com V-DH-3
Replacement Frame
Frame
Perimeter Foam S
Glazing (3/4" Insulating Glass)
Glazing Type
Dual-pane insulating glass S
Insulated Glass Options / Low-E Types
Advanced Low-E O
NaturalSun Low-E O
SunDefense™ Low-E O
Clear (no Low-E coating) S
Additional Glass Options
Annealed glass S
Tempered glass O
Obscure glass 1 O
Gas Fi l l / High Alt i tude
Argon O
Interior / Exterior Color
White S
Grilles-Between-the-Glass
Gri l le Types
3/4" Contour O
1" Contour O
Gril le Patterns
Traditional O
Prairie O
Top Row O
Screens
InView™ screens S
S = Standard; O = Optional (1) Contact your local Pella sales representative for current offering.
East Region Only
Features and Options
Pella® 150 Series Double-Hung Window
Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com V-DH-4
(1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR® values are updated to 2016 (Version 6) criteria.
(2) The Canadian values shown are based on the updated ENERGY STAR® 2020 initiative.
For more information, see the ENERGY STAR guidelines.
Performance values on this page reflect units with standard performance. For performance values on units with a performance upgrade option, please contact Pella Corporation.
Size may affect the performance values
R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance
East Region Only
Climate Zones
Glazing Performance - Total UnitG
lass
Th
ickn
ess
Type of Glazing NFRC Certified Product #
Glass (mm)
Gap Fill
Performance Values 1Shaded Areas Meet ENERGY STAR®
Performance Criteria in Zones Shown
Ext. Int.
U-F
acto
r
SHG
C
VLT CR
U. S. Canada 2
Zone ER Zone
Vent 3-1/4" Frame Depth - Standard Performance N NC SC S CA
3/4" Clear IG PEL-N-108-00130-00001 2.5 2.5 air 0.47 0.60 0.62 43
with Grilles-between-the-glass PEL-N-108-00130-00002 0.47 0.54 0.55 43
3/4" Advanced Low-E IG PEL-N-108-00132-00001 2.5 2.5 air 0.33 0.29 0.53 53
with Grilles-between-the-glass PEL-N-108-00132-00002 0.33 0.26 0.47 53
3/4" Advanced Low-E IG PEL-N-108-00135-00001 2.5 2.5 argon 0.30 0.28 0.53 56 NC
with Grilles-between-the-glass PEL-N-108-00135-00002 0.30 0.26 0.47 56 NC
3/4" NaturalSun Low-E IG PEL-N-108-00131-00001 2.5 2.5 air 0.34 0.50 0.60 53
with Grilles-between-the-glass PEL-N-108-00131-00002 0.34 0.44 0.53 53
3/4" NaturalSun Low-E IG PEL-N-108-00138-00001 2.5 2.5 argon 0.30 0.49 0.60 56 N
with Grilles-between-the-glass PEL-N-108-00138-00002 0.30 0.44 0.53 56 N
3/4" SunDefense™ Low-E IG PEL-N-108-00133-00001 2.5 2.5 air 0.33 0.21 0.49 54 S
with Grilles-between-the-glass PEL-N-108-00133-00002 0.33 0.19 0.44 54 S
3/4" SunDefense™ Low-E IG PEL-N-108-00136-00001 2.5 2.5 argon 0.30 0.21 0.49 57 NC SC S
with Grilles-between-the-glass PEL-N-108-00136-00002 0.30 0.19 0.44 57 NC SC S
3/4" Bronze Advanced Low-E IG PEL-N-108-00128-00001 3 3 argon 0.30 0.28 0.39 56 NC
with Grilles-between-the-glass PEL-N-108-00128-00002 0.30 0.25 0.35 56 NC SC S
CA
Rev. 12/06/19
Pella® 150 Series Double-Hung Window
Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com V-DH-5
East Region Only
For standard grille breakpoints, see size tables.
Grille Patterns
Prairie Lite Patterns
9-Lite Prairie 6-Lite Prairie
Other Available Patterns
Traditional Top Row
Grille Profiles
Grilles-Between-the-Glass
3/4" Contour Grille 1" Contour Grille
Grilles
Prairie- Specify upper or both sash.
- Approximately 4" from edge of sash to center of bar.
- Minimum actual glass is 13".
Traditional- Specify upper or both sash.
- Specify number of lites.
- Grilles must be equally divided on visible glass.
- Minimum 6" x 6" center-to-center.
Top Row - Standard visible glass to separator bar must be ≤1/2 upper actual glass.
Pella® 150 Series Double-Hung Window
Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com V-DH-6
FRAME WIDTH
1-Wide 2-Wide 3-Wide 4-Wide
< 17-1/2" 17-1/2" to 27-1/2" 27-5/8" to 44-3/8" 44-1/2" to 48"
FR
AM
E H
EIG
HT
1-H
igh
23
" to
2
9-3
/8"
2-H
igh
29
-1/2
" to
6
5-1
/2"
3-H
igh
65
-5/8
" to
7
1-1
/2"
4-H
igh
71
-5/8
" to
7
8"
Standard Traditional Grille Breakpoints
East Region Only
Pella® 150 Series Double-Hung Window
Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com V-DH-7
2-6/6-0
2-6/5-6
2-6/5-0
2-6/5-2
2-6/4-4
2-6/4-6
2-6/3-6
2-6/4-0
2-6/3-10
2-6/3-2
2-6/3-0
3-2/6-0
3-2/5-6
3-2/5-2
3-2/5-0
3-2/4-6
3-2/4-4
3-2/4-0
3-2/3-10
3-2/3-6
3-2/3-2
3-2/3-0
2-0/6-0 2-4/6-0 2-8/6-0 3-0/6-0 3-4/6-0
3-4/5-63-0/5-62-8/5-62-4/5-62-0/5-6
2-0/5-2 2-4/5-2 2-8/5-2 3-0/5-2 3-4/5-2
3-4/5-03-0/5-02-8/5-02-4/5-02-0/5-0
2-0/4-6 2-4/4-6 2-8/4-6 3-0/4-6 3-4/4-6
3-4/4-43-0/4-42-8/4-42-4/4-42-0/4-4
2-0/4-0 2-4/4-0 2-8/4-0 3-0/4-0 3-4/4-0
3-4/3-103-0/3-102-8/3-102-4/3-102-0/3-10
2-0/3-6 2-4/3-6 2-8/3-6 3-0/3-6 3-4/3-6
3-4/3-23-0/3-22-8/3-22-4/3-22-0/3-2
2-0/3-0 2-4/3-0 2-8/3-0 3-0/3-0 3-4/3-0
"/ 2129
(762)(749)
2' 6""/ 2137"/ 2135"/ 2131"/ 2127"/ 2123
(965)(953)
3' 2"
(914)(902)
3' 0"
(813)(800)
2' 8"
(710)(699)
2' 4"
(610)(597)
2' 0"Frame
Opening
(1 016)
3' 4"39
(1 003)
"/ 21
1-Wide Vent
(1 5
11)
(1 6
64)
(1 8
16)
(1 5
62)
(1 8
29)
(1 6
76)
(1 5
75)
(1 5
24)
"/ 21
71"
/ 2165
"/ 21
61"
/ 2159
37(953
)(9
65)
(1 0
54)
(1 2
07)
(1 3
59)
(1 1
56)
(1 3
08)
(1 2
19)
(1 3
21)
(1 3
72)
(1 1
60)
(1 0
67)
"/ 21
5153
"/ 21
"/ 21
4745
"/ 21
"/ 21
41
(902
)(9
14)
"/ 21
35"
/ 21
6' 0
"5'
6"
5' 2
"5'
0"
4' 4
"4'
6"
4' 0
"3'
10"
3' 0
"3'
2"
3' 6
"
1E
E
E E
E
E
E
EEE
1E1E
1E
1E
1E
Egress Notes:
Check all applicable local codes for emergency egress requirements.
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2.
See Design Data pages in this section for clear opening dimensions.
Size Tables
East Region Only
Pella® 150 Series Double-Hung Window
Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com V-DH-8
Replacement frame double-hung windows are made to order in 1/8" increments to fit the opening. Listed below are the minimum and maximum size ranges.
Miscellaneous Formulas
Single Vent
Visible Glass
VGW = FW– 6-1/4"
VGH = (FH ÷ 2) – 4"
Actual Glass
AGW = FW – 5-1/4"
AGH =(FH ÷ 2) – 3"
Clear Opening
Equally Divided = (FW – 4-5/8) x (FH ÷ 2 – 5-11/16) ÷ 144
KEY:
AGW = Actual Glass Width AGH = Actual Glass Height FW = Frame Width FH = Frame Height VGW = Visible Glass Width VGH = Visible Glass Height
Special Sizes and Dimensions
Single Vent
MINIMUM14-1/2" W x 23-1/2" H
(368 x 597)
MAXIMUM48 ft 2 (4.46 m 2)48" W x 78" H (1 219 x 1 981)
East Region Only
General Notes: Full Screen:
• To convert areas to square meters (m 2), multiply square feet by 0.0929.• Rough Opening = Frame Dimension + 1/4".• Keep frame dimensions to the nearest 1/8" increment.• If glass width/height ratio is > 5:1, then unit must be tempered.• Bronze annealed glass is limited to 22 ft 2 glass size (actual glass).• Slope Sill Adaptor—14º angle.
• Full Screen—If unit frame dimensions are > 39" wide or > 53-1/2" high, spreader bar is included.
• Two (2) plungers FH ≤ 51-1/2"• Four (4) plungers FH > 51-1/2"
Pella® 150 Series Double-Hung Window
Pella® 150 Series vinyl window products are intended only for use less than 40 feet above ground level.
Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com V-DH-9
1-Wide Vent
Unit
Eg
ress
Frame (Inches)
Clear Opening (Vent Units Only) Visible
Glass Ft 2
Standard Glass Thickness (mm)
Performance Class & Grade 1
Width Height Width Height Ft 2 Annealed Tempered Standard Upgrade 2
2-0/3-0 23-1/2 35-1/2 18-7/8 12-1/16 1.5 3.3 2.5 3 R35 R502-0/3-2 23-1/2 37-1/2 18-7/8 13-1/16 1.7 3.5 2.5 3 R35 R502-0/3-6 23-1/2 41-1/2 18-7/8 15-1/16 1.9 4.0 2.5 3 R35 R50
2-0/3-10 23-1/2 45-1/2 18-7/8 17-1/16 2.2 4.5 2.5 3 R35 R502-0/4-0 23-1/2 47-1/2 18-7/8 18-1/16 2.3 4.7 2.5 3 R35 R502-0/4-4 23-1/2 51-1/2 18-7/8 20-1/16 2.6 5.2 2.5 3 R35 R502-0/4-6 23-1/2 53-1/2 18-7/8 21-1/16 2.7 5.5 2.5 3 R35 R502-0/5-0 23-1/2 59-1/2 18-7/8 24-1/16 3.1 6.2 2.5 3 R35 R502-0/5-2 23-1/2 61-1/2 18-7/8 25-1/16 3.2 6.4 2.5 3 R35 R502-0/5-6 23-1/2 65-1/2 18-7/8 27-1/16 3.5 6.9 2.5 3 R35 R502-0/6-0 23-1/2 71-1/2 18-7/8 30-1/16 3.9 7.6 2.5 3 R30 R502-4/3-0 27-1/2 35-1/2 22-7/8 12-1/16 1.9 4.1 2.5 3 R35 R502-4/3-2 27-1/2 37-1/2 22-7/8 13-1/16 2.0 4.4 2.5 3 R35 R502-4/3-6 27-1/2 41-1/2 22-7/8 15-1/16 2.3 4.9 2.5 3 R35 R50
2-4/3-10 27-1/2 45-1/2 22-7/8 17-1/16 2.7 5.5 2.5 3 R35 R502-4/4-0 27-1/2 47-1/2 22-7/8 18-1/16 2.8 5.8 2.5 3 R35 R502-4/4-4 27-1/2 51-1/2 22-7/8 20-1/16 3.1 6.4 2.5 3 R35 R502-4/4-6 27-1/2 53-1/2 22-7/8 21-1/16 3.3 6.7 2.5 3 R35 R502-4/5-0 27-1/2 59-1/2 22-7/8 24-1/16 3.8 7.6 2.5 3 R35 R502-4/5-2 27-1/2 61-1/2 22-7/8 25-1/16 3.9 7.9 2.5 3 R35 R502-4/5-6 27-1/2 65-1/2 22-7/8 27-1/16 4.3 8.5 2.5 3 R30 R502-4/6-0 27-1/2 71-1/2 22-7/8 30-1/16 4.7 9.4 2.5 3 R30 R502-6/3-0 29-1/2 35-1/2 24-7/8 12-1/16 2.0 4.4 2.5 3 R35 R502-6/3-2 29-1/2 37-1/2 24-7/8 13-1/16 2.2 4.8 2.5 3 R35 R502-6/3-6 29-1/2 41-1/2 24-7/8 15-1/16 2.6 5.4 2.5 3 R35 R50
2-6/3-10 29-1/2 45-1/2 24-7/8 17-1/16 2.9 6.1 2.5 3 R35 R502-6/4-0 29-1/2 47-1/2 24-7/8 18-1/16 3.1 6.4 2.5 3 R35 R502-6/4-4 29-1/2 51-1/2 24-7/8 20-1/16 3.4 7.0 2.5 3 R35 R502-6/4-6 29-1/2 53-1/2 24-7/8 21-1/16 3.6 7.3 2.5 3 R35 R502-6/5-0 29-1/2 59-1/2 24-7/8 24-1/16 4.1 8.3 2.5 3 R35 R502-6/5-2 29-1/2 61-1/2 24-7/8 25-1/16 4.3 8.6 2.5 3 R35 R502-6/5-6 29-1/2 65-1/2 24-7/8 27-1/16 4.6 9.3 2.5 3 R30 R502-6/6-0 E1 29-1/2 71-1/2 24-7/8 30-1/16 5.1 10.3 2.5 3 R30 R50
Egress Notes:
Check all applicable local codes for emergency egress requirements.
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2.
(1) Maximum performance when glazed with the appropriate glass thickness.
(2) Indicates performance with additional steel reinforcement in sash cavity.
To convert areas to square meters (m2), multiply square feet by 0.0929
1 of 2
Design Data
Pella 150 Series vinyl window products are intended only for use less than 40 feet above ground level.
East Region Only
Pella® 150 Series Double-Hung Window
Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com V-DH-10
1-Wide Vent
Unit
Eg
ress
Frame (Inches)
Clear Opening (Vent Units Only) Visible
Glass Ft 2
Standard Glass Thickness (mm)
Performance Class & Grade 1
Width Height Width Height Ft 2 Annealed Tempered Standard Upgrade 2
2-8/3-0 31-1/2 35-1/2 26-7/8 12-1/16 2.2 4.8 2.5 3 R35 R502-8/3-2 31-1/2 37-1/2 26-7/8 13-1/16 2.4 5.2 2.5 3 R35 R502-8/3-6 31-1/2 41-1/2 26-7/8 15-1/16 2.8 5.9 2.5 3 R35 R50
2-8/3-10 31-1/2 45-1/2 26-7/8 17-1/16 3.1 6.6 2.5 3 R35 R502-8/4-0 31-1/2 47-1/2 26-7/8 18-1/16 3.3 6.9 2.5 3 R35 R502-8/4-4 31-1/2 51-1/2 26-7/8 20-1/16 3.7 7.6 2.5 3 R35 R502-8/4-6 31-1/2 53-1/2 26-7/8 21-1/16 3.9 8.0 2.5 3 R35 R502-8/5-0 31-1/2 59-1/2 26-7/8 24-1/16 4.5 9.0 2.5 3 R35 R502-8/5-2 31-1/2 61-1/2 26-7/8 25-1/16 4.6 9.4 2.5 3 R35 R502-8/5-6 E1 31-1/2 65-1/2 26-7/8 27-1/16 5.0 10.1 2.5 3 R30 R502-8/6-0 E1 31-1/2 71-1/2 26-7/8 30-1/16 5.6 11.1 2.5 3 R30 R503-0/3-0 35-1/2 35-1/2 30-7/8 12-1/16 2.5 5.6 2.5 3 R35 R503-0/3-2 35-1/2 37-1/2 30-7/8 13-1/16 2.8 6.0 2.5 3 R35 R503-0/3-6 35-1/2 41-1/2 30-7/8 15-1/16 3.2 6.8 2.5 3 R35 R50
3-0/3-10 35-1/2 45-1/2 30-7/8 17-1/16 3.6 7.6 2.5 3 R35 R503-0/4-0 35-1/2 47-1/2 30-7/8 18-1/16 3.8 8.0 2.5 3 R35 R503-0/4-4 35-1/2 51-1/2 30-7/8 20-1/16 4.3 8.8 2.5 3 R35 R503-0/4-6 35-1/2 53-1/2 30-7/8 21-1/16 4.5 9.2 2.5 3 R35 R503-0/5-0 E1 35-1/2 59-1/2 30-7/8 24-1/16 5.1 10.5 2.5 3 R35 R503-0/5-2 E1 35-1/2 61-1/2 30-7/8 25-1/16 5.3 10.9 2.5 3 R35 R503-0/5-6 E 35-1/2 65-1/2 30-7/8 27-1/16 5.8 11.7 2.5 3 R30 R503-0/6-0 E 35-1/2 71-1/2 30-7/8 30-1/16 6.4 12.9 3 3 R30 R503-2/3-0 37-1/2 35-1/2 32-7/8 12-1/16 2.7 6.0 2.5 3 R30 R503-2/3-2 37-1/2 37-1/2 32-7/8 13-1/16 2.9 6.4 2.5 3 R30 R503-2/3-6 37-1/2 41-1/2 32-7/8 15-1/16 3.4 7.3 2.5 3 R30 R50
3-2/3-10 37-1/2 45-1/2 32-7/8 17-1/16 3.9 8.1 2.5 3 R30 R503-2/4-0 37-1/2 47-1/2 32-7/8 18-1/16 4.1 8.6 2.5 3 R30 R503-2/4-4 37-1/2 51-1/2 32-7/8 20-1/16 4.5 9.4 2.5 3 R30 R503-2/4-6 37-1/2 53-1/2 32-7/8 21-1/16 4.8 9.9 2.5 3 R30 R503-2/5-0 E1 37-1/2 59-1/2 32-7/8 24-1/16 5.5 11.2 2.5 3 R30 R503-2/5-2 E 37-1/2 61-1/2 32-7/8 25-1/16 5.7 11.6 2.5 3 R30 R503-2/5-6 E 37-1/2 65-1/2 32-7/8 27-1/16 6.1 12.5 3 3 R20 R503-2/6-0 E 37-1/2 71-1/2 32-7/8 30-1/16 6.8 13.8 3 3 R20 R503-4/3-0 39-1/2 35-1/2 34-7/8 12-1/16 2.9 6.3 2.5 3 R30 R503-4/3-2 39-1/2 37-1/2 34-7/8 13-1/16 3.1 6.8 2.5 3 R30 R503-4/3-6 39-1/2 41-1/2 34-7/8 15-1/16 3.6 7.7 2.5 3 R30 R50
3-4/3-10 39-1/2 45-1/2 34-7/8 17-1/16 4.1 8.7 2.5 3 R30 R503-4/4-0 39-1/2 47-1/2 34-7/8 18-1/16 4.3 9.1 2.5 3 R30 R503-4/4-4 39-1/2 51-1/2 34-7/8 20-1/16 4.8 10.0 2.5 3 R30 R503-4/4-6 39-1/2 53-1/2 34-7/8 21-1/16 5.1 10.5 2.5 3 R30 R503-4/5-0 E 39-1/2 59-1/2 34-7/8 24-1/16 5.8 11.9 2.5 3 R30 R503-4/5-2 E 39-1/2 61-1/2 34-7/8 25-1/16 6.0 12.4 3 3 R30 R503-4/5-6 E 39-1/2 65-1/2 34-7/8 27-1/16 6.5 13.3 3 3 R20 R503-4/6-0 E 39-1/2 71-1/2 34-7/8 30-1/16 7.2 14.7 3 3 R20 R50
Egress Notes:
Check all applicable local codes for emergency egress requirements.
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2.
(1) Maximum performance when glazed with the appropriate glass thickness.
(2) Indicates performance with additional steel reinforcement in sash cavity.
To convert areas to square meters (m2), multiply square feet by 0.0929
2 of 2
Design Data
Pella 150 Series vinyl window products are intend-ed only for use less than 40 feet above ground level.
East Region Only
Pella® 150 Series Double-Hung Window
Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com V-DH-11
Frame • Overall frame depth is 3-1/4" replacement frame with perimeter foam [optional
sill adapter and head expander].• Frame members are extruded, rigid uPVC.• Frame members are mitered and heat-fused to provide a fully welded corner
assembly.
Sash• Sash members are extruded, rigid uPVC.• Sash members are mitered and heat-fused to provide a fully welded corner
assembly. • Includes an integral extruded sash lift.
Weatherstripping• Frame and sash is weatherstripped around the perimeter with a fin-type, pile
weatherstripping.
Glazing System• Quality float glass complying with ASTM C1036.• Exterior face-glazed 3/4" sealed insulating glass. • [Clear] [Advanced Low-E coated [with argon]] [SunDefense™ Low-E coated,
[with argon]] [NaturalSun Low-E [with argon]] [Clear] [obscure] [tempered].
Interior / Exterior• All window frame members have an integral color extruded throughout the
profiles.• All exposed PVC surfaces are smooth, glossy and uniform in appearance.• Color: White.
Hardware • Constant force balances are concealed within the frame and connected to the
sash with a bracket which houses a stainless steel coil spring. • Upper and lower sashes are fully operable for ventilation.• All fasteners are corrosion-resistant material compatible with PVC.• Locks are factory-installed, zinc die cast, self aligning, cam action locks located
on the checkrail.• Two sash locks are installed on units with 29-1/2" or greater frame width.• Tilt latches are factory installed, zinc die cast and are located on the checkrail of
the lower sash and the top rail of the upper sash. • Factory pre-finished to match interior.
Screen• InView™ Screens Black vinyl coated 18/18 mesh fiberglass screen cloth
complying with SMA 1201.• [Full-size] [Half-screen] Set in aluminum frame and fitted to exterior of window.• Screens for window with frame height ≤ 51-1/2" have one plunger per side,
windows with frame height > 51-1/2" have two plungers per side. • Screens for windows with frame width >39" or frame height > 53-1/2" have a
screen spreader bar
Optional ProductsGrilles• Grilles-Between-the-Glass
� Insulating glass contains [3/4"] [1"] contoured aluminum grilles permanently installed between two panes of glass.
� Grilles match color of frame.• Optional limited opening hardware for field installation available for vent units in
extruded vinyl, color to match the unit; nominal 3-3/4" opening.• Optional window opening control device available for field installation. Device
allows window to open less than 4” with normal operation, with a release mechanism that allows the sash to open completely. Complies with ASTM F2090-10.
Detailed Product Description
East Region Only
Rev. 12/06/19
Pella® 150 Series Double-Hung Window
Pella 2019 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com V-DH-12
[53]
2 1/
16"
[19]
3/4"
[11]
7/16
"
[9]
3/8"
[58]
2 5/
16"
[30]
1 3/
16"
[58]
2 5/
16"
[30]
1 3/
16"
[46]1 13/16"
[46]1 13/16"
[58]2 5/16"
[79]3 1/8"
[32]1 1/4"
[30]1 3/16"
[79]3 1/8"
[46]1 13/16"
[32]1 1/4"
[30]1 3/16"
[79]3 1/8"
[67]2 5/8"
[44]1 3/4"
[30]1 3/16"
[67]2 5/8"
[92]3 5/8"
[9]
3/8"
[83]3 1/4" OAW
[44]
1 3/
4"[3
5]1
3/8"
[35]
1 3/
8"
[83]
3 1/
4" O
AW
FRAME WIDTH
[32]
1 1/
4"[4
8]1
7/8"
[35]1 3/8"
FRA
ME
HE
IGH
T
[13]
1/2"
FRAME WIDTH
[73]2 7/8"[1
3]1/
2"[3
2]1
1/4"
[48]
1 7/
8"
[35]1 3/8"
[35]
1 3/
8"[3
5]1
3/8"
[32]
1 1/
4"[4
4]1
3/4"
[35]
1 3/
8"
FRA
ME
HE
IGH
T
[32]
1 1/
4"
[83]
3 1/
4" O
AW
HALF SCREEN
FULL SCREEN
[73]2 7/8"
FRAME WIDTH
UJCR
LJ
VS
VH
VH VENT HEAD
UPPER JAMBSUJ
LOWER JAMBSLJ
UPPER JAMBSUJ
VS VENT SILL
CHECK RAILCR
VS VENT SILL
CHECK RAILCR
VH VENT HEAD
Scale 3" = 1' 0" All dimensions are approximate.
Unit Sections - 3-1/4" Replacement Frame
East Region Only
Pella® 150 Series Double-Hung Window