Upload
erica-cha-cha-
View
245
Download
0
Embed Size (px)
Citation preview
8/11/2019 Pemodelan Novian
1/24
Mathematic Modelling
CFD ANALYSIS OF WIND-POWERED WATER PUMP SYSTEM
Created by:
NOVIAN RISKIANA DEWI (090210101018)
MATH EDUCATION PROGRAME
FACULTY TEACHER TRAINING AND EDUCATION
UNIVERSITAS JEMBER
2012
8/11/2019 Pemodelan Novian
2/24
athematics odelling
I. PRELIMINARY
Access to clean water is a problem for 884 million people around the world, and some of
these problems comes from the inability to pump water from wells and difficulty in moving
water from one region to another. Improved blade design in wind-powered water pumps has the
potential to alleviate these difficulties. This analysis investigated improved wind turbine blade
designs in which blades pivoted out of the wind when not in use. Using locally sourced materials
and labour, the design cost was found to be under two days' wage for the Southern Asian regions
in which it would be built. The comparative computational fluid dynamics analysis found that
torque could be increased by a factor of 2,35 through two factors resulting from blade pivots: the
first was decreased drag on unused blades, and the second was increased torque power-producing
blades due to increased wind availability. A proof of concept was also conducted in order to
confirm computational models.
The purpose of this page is to provide analytical techniques for pre-existing wind-
powered water pumping systems in developing countries. These devices, known as windpumps,
have already been investigated but Remains much work to be done in improvement and
optimization. This device, known as windpumps, have been investigated but is still much work
to be done in the improvement and optimization.
The Following the analysis was therefore conducted using only generic dimensions and
wind speed can be used correlations That in any geography, Provided That members of the
community Deem the use and effects of the Appropriate analysis. The following analysis
because it is done using the correlation dimension and generic wind speed that can be used in
geography, as long as members of the public considers the use and impact of proper analysis.
The designs found in this analysis are also subject to material and labor time constraints: the
design is left to the builder to modify as They see fit. Design found in this analysis are also
subject to the constraints of time material and labor: the design is left to the builder to modify as
they see fit. Such as, the scope does not include local instructions for construction of the blades.
Thus, the scope does not include instructions for the local construction of the blade.
8/11/2019 Pemodelan Novian
3/24
athematics odelling
The conducted analysis consists of two parts: The analysis consists of two parts:
1) The design of a new method to improve a standard
vertical axis wind rotor for use in areas with low wind speeds and variable.
2) Computational Fluid Dynamics (CFD) analysis of new rotor in order to look for possible
improvements.
The overall objective of this project is to improve the community wind turbine was built
for use in pumping air.So most effectively through engineering analysis of the focus, the project
concentrated on the design and modeling of a new rotor to the wind-pump.A proof of concept
and computational fluid analysis performed for the rotor to verify that the fundamental
innovation of the design will function as required. However, this project follows the principles of
sustainable design wherever possible, and as such local materials and expertise should be taken
into account when scaling up the design of a proof of concept to full-scale system.
8/11/2019 Pemodelan Novian
4/24
athematics odelling
II. FORMULATION OF THE EQUATION
2.1 Momentum Equation
P = Note:
P : Power available : Air velocity The air density : The area covered wind turbine
F =
Note:
F : The force created : Pressure on the back of the blade
: Pressure on the front of the blade A : Area
+
-
+
-
= F
+
+
+
+
8/11/2019 Pemodelan Novian
5/24
athematics odelling
+
Change u with u cos and v with v sin
+
Integral both of side to x and y
(1)
8/11/2019 Pemodelan Novian
6/24
athematics odelling
2.2 Energy Equation
+ = k +
+ = k
+ (
)
+
= k
+ (
)
+
= k
+
+ = + +
.. (2)
8/11/2019 Pemodelan Novian
7/24
athematics odelling
Substitute the 2thequation to the 1thequation, so we have :
( [
])
( )
+ ( ) + ( ) + ( ) = -
8/11/2019 Pemodelan Novian
8/24
athematics odelling
= = * +
=
= ( )* + =
= ( )* + =
= ( )* +
*
+ *
+
+
* + * + + * + + * + + *
+ + * + =
8/11/2019 Pemodelan Novian
9/24
athematics odelling
-
[A]
[B]
= [C] [D] [E] F] [G] [H]A = * + B = * +
C = * + * +
D = * +
8/11/2019 Pemodelan Novian
10/24
athematics odelling
E = * +
F = * +
G = * +
H= -
= -
8/11/2019 Pemodelan Novian
11/24
athematics odelling
Discretization Scheme
(i,j+4) (i+1,j+4) (i+2,j+4) (i+3,j+4) (i+4,j+4)
(i,j+3) (i+1,j+3) (i+2,j+3) (i+3,j+3) (i+4,j+3)
(i,j+2) (i+1,j+2) (i+2,j+2) (i+3,j+2) (i+4,j+2)
(i,j+1) (i+1,j+1) (i+2,j+1) (i+3,j+1) (i+4,j+1)
(i,j)
(i+1,j)
(i+2,j)
(i+3,j)
(i+4)
x
y
8/11/2019 Pemodelan Novian
12/24
athematics odelling
8/11/2019 Pemodelan Novian
13/24
athematics odelling
Based on discretization scheme, we get the discretization matrix :
C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 H
B C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 H
A B C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 H0 A B C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4 H
0 0 A B C 0 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5 H
F 0 0 0 0 C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 H
0 F 0 0 0 B C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0 0 7 H
0 0 F 0 0 A B C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0 8 H
0 0 0 F 0 0 A B C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 9 H
0 0 0 0 F 0 0 A B C 0 0 0 0 G 0 0 0 0 0 0 0 0 0 0 10 H
E 0 0 0 0 F 0 0 0 0 C D 0 0 0 G 0 0 0 0 0 0 0 0 0 11 H
0 E 0 0 0 0 F 0 0 0 B C D 0 0 0 G 0 0 0 0 0 0 0 0 12 H
0 0 E 0 0 0 0 F 0 0 A B C D 0 0 0 G 0 0 0 0 0 0 0 13 = H
0 0 0 E 0 0 0 0 F 0 0 A B C D 0 0 0 G 0 0 0 0 0 0 14 H
0 0 0 0 E 0 0 0 0 F 0 0 A B C 0 0 0 0 G 0 0 0 0 0 15 H
0 0 0 0 0 E 0 0 0 0 F 0 0 0 0 C D 0 0 0 G 0 0 0 0 16 H
0 0 0 0 0 0 E 0 0 0 0 F 0 0 0 B C D 0 0 0 G 0 0 0 17 H
0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 A B C D 0 0 0 G 0 0 18 H
0 0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 A B C D 0 0 0 G 0 19 H
0 0 0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 A B C 0 0 0 0 G 20 H
0 0 0 0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 0 0 C D 0 0 0 21 H
0 0 0 0 0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 0 B C D 0 0 22 H
0 0 0 0 0 0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 A B C D 0 23 H
0 0 0 0 0 0 0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 A B C D 24 H
0 0 0 0 0 0 0 0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 A B C 25 H
8/11/2019 Pemodelan Novian
14/24
athematics odelling
MATLAB
disp('==========================================================');
disp('CFD analysis of wind-powered water pumping system');
disp('Created by:');
disp('NOVIAN RISKIANA DEWI');
disp('090210101018');disp('==========================================================');
g=9.8;
rho=0.8;
deltax=input('Enter the discretization length of x=');
deltay=input(Enter the discretization length of y=');
tetha=input('Enter the angle of the turbine blades=');
u=input('Enter the speed of the wind on the x axis=');
v=input('Enter the speed of the wind on the y axis=');
miu=input('Enter the thickness of=');
Cv=input('Insert the power coefficient of rotor=');
Pf=input('Enter the pressure on the front of the blade=');
Pb=input('Enter the pressure on the back of the blade=');
A2=input('Enter the area covered by wind turbines =);
k=input('Enter a value of k=');
A=(1/8*rho*u*cos(tetha))-(1/8*rho^2*u*cos(tetha))*deltay;
8/11/2019 Pemodelan Novian
15/24
athematics odelling
B=((((1/8)*rho^2*u*cos(tetha))-((1/8)*rho*u*cos(tetha))+((3/4)*rho^2*u*cos(tetha))-((3/4)*rho*u*cos(tetha)))*deltay);
C=((((3/4)*rho*u*cos(tetha))-((3/4)*rho^2*cos(tetha))+((3/8)*rho^2*u*cos(tetha))-
((3/8)*rho*u*cos(tetha)))*deltay)+(((3/4)*rho*v*sin(tetha))-((3/4)*rho 2*v*sin(tetha))+((3/8)*rho^2*v*sin(tetha))-
((3/8)*rho*v*sin(tetha))*deltax);
D=((((3/8)*rho*u*cos(tetha))-((3/8)*rho^2*u*cos(tetha)))*deltay);
E=((((1/8)*rho*v*sin(tetha))-((1/8)*rho^2*v*sin(tetha)))*deltax);
F=((((1/8)*rho^2*v*sin(tetha))-((1/8)*rho*v*sin(tetha))+((3/4)*rho^2*v*sin(tetha))-((3/4)*rho*v*sin(tetha)))*deltax);
G=((((3/8)*rho*v*sin(tetha))-((3/8)*rho^2*v*sin(tetha)))*deltax);
H=((rho*g*deltay)+(rho*g*deltax)-((1/2)*rho*u^3*A2*deltay)-
((1/2)*rho*v^3*A2*deltax)+((miu*u*cos(tetha))*(deltay/deltax))+((miu*v*sin(tetha))*(deltay/deltax))+((miu*u*cos(tetha))*(deltax/d
eltay))+((miu*v*sin(tetha))*(deltax/deltay))-((miu*v*sin(tetha))*(deltax/deltay))-(((k*u*cos(tetha))/Cv)*(deltay/deltax))-
(((k*v*sin(tetha))/Cv)*(deltax/deltay))-((((2*miu*u 2)/Cv)*(cos(tetha))^2)*(deltay/deltax))-
((((2*miu*v^2)/Cv)*(sin(tetha))^2)*(deltax/deltay))-((((miu*v^2)/Cv)*(sin(tetha)) 2)*(deltay/deltax))-
(((miu*u*v)/Cv)*sin(2*tetha))-((((miu*u^2)/Cv)*(cos(tetha))^2)*(deltax/deltay))+(((Pf-Pb)/A)*deltax*deltay));
M=[C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0;B C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0;A B C D 0 0 0 G 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0;0 A B C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0;0 0 A B C 0 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0;F 0 0 0 0 C D 0 0 0G 0 0 0 0 0 0 0 0 0 0 0 0 0 0;0 F 0 0 0 B C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0 0;0 0 F 0 0 A B C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0 0;0 0 0 F
0 0 A B C D 0 0 0 G 0 0 0 0 0 0 0 0 0 0 0;0 0 0 0 F 0 0 A B C 0 0 0 0 G 0 0 0 0 0 0 0 0 0 0;E 0 0 0 0 F 0 0 0 0 C D 0 0 0 G 0 0 0 0 0 0
0 0 0;0 E 0 0 0 0 F 0 0 0 B C D 0 0 0 G 0 0 0 0 0 0 0 0;0 0 E 0 0 0 0 F 0 0 A B C D 0 0 0 G 0 0 0 0 0 0 0;0 0 0 E 0 0 0 0 F 0 0 A B C D
0 0 0 G 0 0 0 0 0 0;0 0 0 0 E 0 0 0 0 F 0 0 A B C 0 0 0 0 G 0 0 0 0 0;0 0 0 0 0 E 0 0 0 0 F 0 0 0 0 C D 0 0 0 G 0 0 0 0;0 0 0 0 0 0 E 0 0
0 0 F 0 0 0 B C D 0 0 0 G 0 0 0;0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 A B C D 0 0 0 G 0 0;0 0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 A B C D 0 0 0 G 0;0
0 0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 A B C 0 0 0 0 G;0 0 0 0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 0 0 C D 0 0 0;0 0 0 0 0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 0
8/11/2019 Pemodelan Novian
16/24
athematics odelling
B C D 0 0;0 0 0 0 0 0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 A B C D 0;0 0 0 0 0 0 0 0 0 0 0 0 0 E 0 0 0 0 F 0 0 A B C D;0 0 0 0 0 0 0 0 0 0 0 0 0
0 E 0 0 0 0 F 0 0 A B C]
L=[H;H;H;H;H;H;H;H;H;H;H;H;H;H;H;H;H;H;H;H;H;H;H;H;H]
V=inv(M)*L
plot(V)
Matlab results:
Suppose we enter the following numbers:
pemodelan1
==========================================================
CFD analysis of wind-powered water pumping system
Created by:
NOVIAN RISKIANA DEWI
090210101018
==========================================================
8/11/2019 Pemodelan Novian
17/24
athematics odelling
Enter the discretization length of x=0.6
Enter the discretization length of y=0.6
Enter the angle of the turbine blades=45
Enter the speed of the wind on the x axis=20
Enter the speed of the wind on the y axis=15
Enter the thickness of=0.7
Insert the power coefficient of rotor=2
Enter the pressure on the front of the blade=2
Enter the pressure on the back of the blade=1
Enter the area covered by wind turbines =24
Enter a value of k=0.8
8/11/2019 Pemodelan Novian
18/24
athematics odelling
8/11/2019 Pemodelan Novian
19/24
athematics odelling
FLUENT
Grid Visualization
8/11/2019 Pemodelan Novian
20/24
athematics odelling
Iteration Graphics 1 Iteration Graphics 2
Iteration Graphics 3
8/11/2019 Pemodelan Novian
21/24
athematics odelling
Filled Contours of Velocity Magnitude 1 Filled Contours of Velocity Magnitude 2
Filled Contours of Velocity Magnitude 3
8/11/2019 Pemodelan Novian
22/24
athematics odelling
Filled Contours of Static Pressure 1 Filled Contours of Static Pressure 2
Filled Contours of Static Pressure 3
8/11/2019 Pemodelan Novian
23/24
athematics odelling
The Velocity Visualization by Vektor Appearance 1 The Velocity Visualization by Vektor Appearance 2
The Velocity Visualization by Vektor Appearance 3
8/11/2019 Pemodelan Novian
24/24
Analysis:
In the picture I present turbine in front, I distinguish the point of curvature on the turbine blades.
Figure 1, the turbine blade angle greater than the figure 2 and figure 3. Whereas Figure 3 has a
blade angle of curvature smaller.
Curvature of the blade angle will result in greater wind speeds are small, while the pressure of
the wind turbines around. The smaller the angle of curvature of turbine blades, the greater the
wind speed and the smaller the pressure around the turbine. On the turbine which has a small
angle of curvature, will move faster, and be able to pump more water.
Whereas in Figure 1, the wind pressure is greater when compared with figure 2 and figure 3.
Greater curvature of the blade, the greater the pressure that goes around the turbine.
Conclusion:
Of the three images, we can conclude that if the turbine blade angle of curvature is smaller then
the wind speed will be greater, and vice versa.
So, if we're going to make a water pump with the use of wind systems, we have to make a
smaller angle of turbine blades for wind speeds greater that the speed of water pumped will be
even greater.