WE BUILT A REPUTATION FOR PERFORMANCE, AND IT STUCK

3M™ LAMINATING ADHESIVE 300LSE

High-performance adhesive solutionsfor your most challenging surfaces

[ ]

STUCK WITH A DIFFICULT APPLICATION?3M™ Laminating Adhesive 300LSE Delivers.

If you’re working with low-surface-energy plastics, powder coats, or lightly oiled metals, achieving consistent, durable adhesion

can be tricky. 3M™ Laminating Adhesive 300LSE is a unique, high-strength acrylic adhesive that can bond decorative graphics,

rating plates and die-cut parts to the toughest surfaces, quickly and easily.

This hard-working adhesive is ideal for applications requiring extremely high peel-bond strength, high temperature tolerance and

resistance to chemicals. It is engineered for long-term durability.

[ ]

Proven Performance Means Long-Lasting Results.

Peel Adhesion to Polypropylene (low-surface-energy plastic)

Competitor X Competitor Y 3M™ Laminating Adhesive 300LSE

oz/in

140

120

100

80

60

40

20

0Competitor Z 3M™ Laminating

Adhesive 300LSE

oz/in

140

120

100

80

60

40

20

015

27

136

36

74

2 mil 5 mil

Shear Strength at Elevated Temp.

Competitor X Competitor Y 3M™ Laminating Adhesive 300LSE

Temp. toFailure °F

700

600

500

400

300

200

100

0

200 °F267 °F

444 °F

2 mil

90° peel adhesion, 12"/minute, 90° angle, 72 hours room temperature dwell 1/2 in2 overlap, 200g load

Note: The technical information and data should be considered representative or typical only and should not be used for specification purposes.

3M LAMINATING ADHESIVES ARE ENGINEERED FORPERFORMANCE, ENDURANCE, AND RELIABILITY.[ ]

TRANSPORTATION

Underhood Labels

Die-Cut Parts

Interior Appliques

Decorative Trim

Instruction Panels

Membrane Switch Attachment

APPLIANCE

Nameplates

Die-Cut Parts

Decorative Trim

Appliques onCoffeemakers,Blenders, Refrigerators

Membrane SwitchAttachment

ELECTRONICS

Nameplates

Die-Cut Parts

Decorative Trim

Appliques on Computers, Copiers,Audio/Video Equipment

Membrane SwitchAttachment

INSTRUMENTATION

Nameplates

Die-Cut Parts

Decorative Trim

Appliques onMedical and Industrial Instruments and Gauges

Membrane SwitchAttachment

3M™ Laminating Adhesive 300LSE is available in 2.0, 3.5 and 5.0 mil thicknesses for excellent bonds on smooth, textured and rough surfaces.

3M™ LAMINATING ADHESIVES 300LSE MARKET AND APPLICATION FEATURES

Transportation

Appliance

Electronics

Instrumentation

High Adhesion to LSE Plastics

Bonds to polypropyleneinterior and underhoodparts.

Bonds to powder coatedpaints and polypropylenehousings.

Bonds to plasticcomponents and specialtytextured paints.

Bonds to powder coatedpaints, polypropyleneplastic surfaces.

High Shear Strength

Reduced adhesive ooze and slippage.

Resists slippage, lifting, and vandalizing of graphics.

Resists lifting, adhesiveooze and slippage.

Durable bond for rough use.

High Temperature andChemical Resistance

Performs in interior andunderhood applications.Resists oils, greases andfluids.

Resists high temperatureenvironments and typicalhousehold cleaners.

Resists high temperaturesassociated with transformersand lighting.

Resists medical andindustrial cleaners.

Adhesive Smoothnessand Clarity

Excellent appearance ofinstrument graphics andback lighting appliques.

Excellent appearance of high-gloss white andblack appliques.

Excellent appearance of thin plastic decorative trim.

Excellent control panelappearance.

Printed in U.S.A.© 3M, 200570-0707-6167-4

Recycled Paper10% post-consumer

Industrial and Transportation BusinessConverter MarketsIndustrial Adhesives and Tapes Division3M Center, Building 220-5E-06St. Paul, MN 55144Tel: 800 223 7427Fax: 651 778 4244www.3M.com/converter

Product Use: All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factorsbeyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditionsin which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whetherit is fit for a particular purpose and suitable for the user’s method of application.

Warranty and Limited Remedy: Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the applicablespecifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHERWARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIEDWARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’sapplication. If the 3M product is defective within the warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the product or refund the purchase price.

Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential,regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.

Description

58# PCK liner for moisture stability and punch press die-cutting.

Double linered for selective die-cutting.

83# PCK liner for lay-flat moisture stability and excellentprocessing. Kiss-cutting for end tabs and multiple nameplates on a common sheet.

Polyester film liner is ideal for rotary die-cutting, high-speed processing, automatic dispensing and clean room environments.

Double-coated tape has a carrier that adds dimensional stability to foams and other substrates and makes it easier to handle during slitting and die-cutting.

Product

9471LE

9453LE

9472LE

8132LE

8153LE

9671LE

9653LE

9672LE

9453FL

9471FL

9472FL

9490LE

9474LE

9490LE

Adhesive Thickness

2.0 mils

3.5 mils

5.0 mils

2.0 mils

3.5 mils

2.0 mils

3.5 mils

5.0 mils

3.5 mils

2.0 mils

5.0 mils

6.7 mils

6.7 mils

6.7 mils

Moisture-Stable Liner

58# polycoated kraft / 4.0 mils

58# polycoated kraft / 4.0 mils

58# polycoated kraft / 4.0 mils

58# polycoated kraft / 4.0 mils83# polycoated kraft / 6.5 mils

58# polycoated kraft / 4.0 mils83# polycoated kraft / 6.5 mils

83# polycoated kraft / 6.5 mils

83# polycoated kraft / 6.5 mils

83# polycoated kraft / 6.5 mils

2 mil polyester film

2 mil polyester film

2 mil polyester film

58# polycoated kraft / 4.2 mils

Faceside liner 58# polycoated kraft / 4.2 mils, no printBackside liner 58# polycoated kraft / 4.2 mils, 3M 300LSE printed

58# polycoated kraft / 4.2 milsFaceside 300MP / 0.5 mil polyester carrierBackside 300LSE / 3.4 mils

3M™ LAMINATING ADHESIVE 300LSE PRODUCT CONSTRUCTION