Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Photographs may show non-standard equipment
PERFORMANCE CURVE
PERFORMANCE DATA
Rated SpeedIntermittent
Peak PowerPower Bulge %
Peak TorqueTorque Rise %
RATED BHP is the power rating for variable speed and loadapplications where full power is required intermittently.
CONTINUOUS BHP is the power rating for applications operatingunder a constant load and speed for long periods of time.
HEAVY DUTY - see application ratings/definitions, engineperformance curves.
POWER OUTPUT is withing + or - 5% at standard SAE J 1995 andISO 3046.
CERTIFICATIONS: EPA Tier 3, EU STAGE III A AND CARB
200 hp (149 kW) @ 2200 rpm
218 hp (162 kW) @ 2000 rpm9% @ 2000 rpm
618 lb-ft (838 N.m) @ 1400 rpm30% @ 1400 rpm
John Deere Power Systems3801 W. Ridgeway Ave.PO Box 5100Waterloo, IA 50704-5100Phone (800) 533-6446Fax (319) 292-5075
John Deere Power SystemsUsine de SaranB.P. 11013F-45401 Fleury les Aubrais CedexFrancePhone (33) 2 38 82 61 19Fax (33) 2 38 82 60 00
DSWDI145 Litho in U.S.A. (06 June 07)
DIMENSIONS
FEATURES AND BENEFITSVariable Geometry Turbocharger (VGT)• Varies exhaust pressure based on load and speed to insure
proper EGR flow; greater low-speed torque, quicker transientresponse, higher peak torque, and best-in-class fuel economy.
Cooled Exhaust Gas Recirculation (EGR)• Cools and mixes measured amounts of cooled exhaust gas with
incoming fresh air to lower peak combustion temperatures,thereby reducing NOx.
4-Valve Cylinder Head• Provides excellent airflow resulting in greater low speed
torque and better transient response. Cross flow design.Air-to-Air Intercooling• Most efficient method of cooling intake air to help reduce
engine emissions while maintaining low speed torque,transient response time and peak torque. Enables an engine tomeet emissions with better fuel economy and the lowestinstalled costs
High Pressure Electronic Fuel Injection Systems• HPCR: Higher injection pressures, up to 1600 bar
(23,500 PSI), variable injection pressure, variable timingcontrol, multiple injections and controls the duration ofinjection.
Compact Size• Horsepower/displacement ratio is best-in-class (lower installed
cost)• Mounting points for Tier 3/Stage III A engine models same
as Tier 2/Stage 2 engine models
John Deere Electronic Engine Controls• Monitors critical engine functions providing warning and/or
shutdown to prevent costly engine repairs; eliminates need foradd-on governing components; all lowering total installedcosts. Snapshot diagnostic data that can be retrieved usingcommonly available diagnostic service tools• New common wiring interface connector for vehicles oravailable OEM instrumentation packages; new solid conduitand "T" connectors to reduce wiring stress, greater durabilityand improved appearance
• Factory installed engine mounted ECU or remote mountedECU, wiring harness and associated components
• Industry standard SAE J1939 interface which communicateswith other vehicle systems, eliminating redundant sensors andreducing vehicle installed cost
Engine Performance• New 'power bulge' feature• Multiple rated speeds to further reduce noise and improve
fuel economy• New higher peak torque ratings• Better transient response time• Greater levels of low speed torqueAdditional Features• Glow plugs; gear-driven auxiliary drive; optional 500-hour
oil change; self adjusting ploy-vee fan drive, R.H. and L.H.engine mounted fuel filters; engine mounted ECU
GENERAL DATA
Model 6068HF485Number of Cylinders 6Displacement-- L (cu.in) 6.8 (415)Bore X Stroke--in. (mm) 4.20 x 5.00 (106 x 127)Compression Ratio 17.0:1Engine Type In-line, 4-Cycle
Aspiration Air-to-AirLength--in. (mm) 44.1 (1120)Width--in. (mm) 24.1 (611)Height--in. (mm) 41.7 (1058)Weight, dry--lb (kg) 1495 (678)
Specifications and design subject to change without notice