Embed Size (px)
DESCRIPTION
Scaffold
Citation preview
DOMINOThe lightweight Panel Formwork for forming without a crane
Edition 01/2010
PERI GmbHFormwork Scaffolding EngineeringP.O. Box 1264
89259 Weissenhorn
Germany
Tel +49 (0)73 09.9 50-0
Fax+49 (0)73 09.9 51-0
www.peri.com
Important Notes:
Without exception, all current safety regulations must be observed in those countries where our products are used.
The illustrations in this brochure are photographs of real site situations. Safety or formwork anchor details are therefore not to be taken as a definitive guide to the way the equipment is to be used.
Safety instructions and load specifications are to be strictly observed at all times. Separate structural calculations are required for any deviations from the standard design data.
The information contained herein is subject to tech-nical changes in the interests of progress. Errors and typographical mistakes reserved.
1
DOMINO 2 The lightweight panel formwork
for forming without a crane
4 Corners, T-junctions, Fillers
6 Accessories for quick and simple forming
8 Components
24 PERI International
Content
2
DOMINOThe lightweight panel formwork for forming without a crane
DOMINO is the lightweight panelized formwork system with elements made of steel or aluminium for smaller residential and civil engineer-ing projects.
Only four panel widthsThis means any ground plan can be
formed. The 0.75 m element is also
available as a multi-purpose panel.
Whether on standard panel connections ...
DOMINO DRS Alignment CouplerIt fastens, aligns and tightens in a
single operation.
... or with filler timbers up to 120 mm wide.
250 x 100in steel and aluminium
250 x 75in steel and aluminium
250 x 25in steel
250 x 50in steel
3
High allowable fresh concrete pressureFor concreting heights up to 2.50 m,
the DOMINO has been designed for
the full hydrostatic pressure according
to DIN 18202, table 3, line 7 (steel ele-
ments) and line 6 (aluminium panels).
For greater heights a fresh concrete
pressure of 60 kN/m2 (steel panels) is
allowable in compliance with DIN
18202, table 3, line 6. This allows quick
concreting and ensures very flat con-
crete surfaces. At greater heights (ex-
tended forms) the aluminium panels
must only be used as extension panels
at the top.
– Only 2 ties needed for concreting
heights up to 2.50 m. This means
1.25 m² of wall area per tie.
– The DOMINO DG 85 scaffold bracket
for an 850 mm wide concreting scaf-
fold. The maximum bracket spacing is
an economical 2.00 m under an im-
posed load of 150 kg/m².
DOMINO form with
push-pull props and
concreting platform
ready for use.
DOMINO DKS Wedge CouplerFor the standard panel joint
at foundations.
The DKS Wedge Coupler
for standard panel joints
with normal requirements.
DOMINO panels are extremely light yet
withstand a high load. The 250 x 100
panel in aluminium weighs only 59 kg.
4
30
20
35
24
25
25
DOMINO standard applicationCorners, T-junctions, Fillers
Corners
Two DRS alignment couplers are need-
ed at the internal corner and the stand-
ard panel joint.
Four DOMINO DRS alignment couplers
are needed on each side of the external
corner.
DWD 5
DWD 5 DAR 80
DWD 5
2 DWD 5
DAR 80
DAR 80
Filler timber 1 cm
Compensation Waler DAR 80
2 DWD 5
External Corner DAW
D 5
0
D 50
DGE
The 50 panel and the DAW external cor-
ner angle form the external corner. To-
gether with the DWD 5 compensator,
wall thicknesses from 150 to 350 mm
in 50 mm increments are possible.
Basic rules for corners:
Outside:Panel D 50
Corner Angle DAW
Inside:Articulated Corner DGE
Adjusted to wall thickness with
DWD compensator or timber.
5
20
24
30
35
25
T-Junctions
Up to 300 mm with filler support DPA
and compensation waler DAR 80
Up to 120 mm with DOMINO DRS
alignment coupler and filler timber.
DWD 5
Filler timber
1 cm
DWD 5
DWD 5
DGE
D 75
DGE
The 75 panel and the articulated corner
form the T-junction. Together with the
DWD 5 compensator, wall thicknesses
from 150 to 350 mm in 50 mm incre-
ments are possible.
Basic rules for T-junctions:
Outside:Panel D 75
Inside:Articulated Corner DGE
Adjusted to wall thickness with
DWD compensator or timber.
Length adjustments
6
DOMINOAccessories for quick and simple forming
All of the cross struts of the DOMINO panelss have connecting holes for accessories. These details allow to shutter fast the easy way.
The coupler with captive
wedge makes erection very
easy.
Push-Pull Prop Connector DRAFor connecting push-pull props and
kicker braces to horizontal and vertical
struts.
DOMINO Scaffold Bracket DG 85The Scaffold Bracket DG 85 for an
850 mm wide concreting scaffold.
Simply hook in and lock
with pin.
Moving a stack of panels with
DOMINO stacking device.
Large units can be moved
with the DOMINO Lifting
Hook.
DOMINO Lifting HookSafe working load:
500 kg For lifting upright single panels
or units. Always use 2 hooks for each
unit being moved.
DOMINO Stacking Devicemakes handling with the crane and
stacking on site easier. The stacks can
also be moved with a fork-lift truck.
8 panels of a particular size can be
stacked quickly and safely.
7
1,2
5 m
0,7
5 m
DOMINO elements are also extreme-ly suitable for forming foundations.One major benefit is the inset tie points
of the 1.25 m high panel. These allow
even foundation forms to be tied easily.
Strip foundations and single
footings with the DLS founda-
tion tie spanner (below) and
DAH tie bracket (above).
The 1.25 m high DOMINO panels
have inset tie points and can be
used on their sides without any
problems.
Foundation Tie Clamp DLSItem no. 066090
Perforated Foundation Tie, 25 m rollItem no. 023020
Top Tie Bracket DAHItem no. 066086
Wall footings and single-column footings with the foundation tie spanner and tie bracket.
– The DOMINO foundation tie clamp for
shuttering foundations easily and re-
places the bottom tie position and
saves work space and hence earth-
works.
– Ties are tensioned accurately with a
self-cleaning hexagonal spindle.
– Using the top tie bracket for the top
tie point avoids the DOMINO panels
having to be aligned exactly. It is pos-
sible to tie at any position on the
panel.
8
Item no. Weight kg
DOMINO Panel Formwork
066020 87,700 Panel D 250 x 100Panel with steel frame and formlining 15 mm.
2500
530
1440
530
1000 117
066022 71,600 Panel D 250 x 75Panel with steel frame and formlining 15 mm.
2500
530
1440
530
750 117
066025 54,500 Panel D 250 x 50Panel with steel frame and formlining 15 mm.
2500
530
1440
530
500 117
9
Item no. Weight kg
DOMINO Panel Formwork
066026 37,700 Panel D 250 x 25Panel with steel frame and formlining 15 mm.
530
1440
530
2500
250 117
066021 59,500 Panel DA 250 x 100Panel with aluminium frame and formlining 15 mm.
2500
530
1440
530
1000 117
066023 47,500 Panel DA 250 x 75Panel with aluminium frame and formlining 15 mm.
2500
530
1440
530
750 117
10
Item no. Weight kg
DOMINO Panel Formwork
066024
066032
76,500
50,200
Multi Panels DM/DMA 250Multi Panel DM 250 x 75Multi Panel DMA 250 x 75Panel Steel/Alu with formlining 15 mm. For oblique
angles, wall connections etc..
Complete with46 x 030290 Plug Ø 20 mm
2500
530
1440
530
45 66022 x 30 = 45
117
750
066029 39,000 Articulated Corner DGE 250Made of aluminium. For oblique angles from 75°
for the outside and inside.
Complete with2 x 066100 Corner Locking DEA 90°
2500
530
1440
530
117
250 250 250
066030
101986
7,820
11,600
Wall Thickness Compensations DWD 250Wall Thickness Compensation DWD 250 x 5Wall Thickness Compensation DWD 250 x 10For adaptating to different wall thicknesses.
530
1440
530
2500
50
117
27 100
117
27
11
Item no. Weight kg
DOMINO Panel Formwork
066028 10,500 Outside Corner Angle DAW 250For panel connection at 90° external corners.
2500
117
117
066033 4,150 Filler Support DPA 250For infillings with 21 mm plywood.
2490
93/8
745
111603 148,000 Shaft Panel DSE 275For lifting complete internal formwork in shafts.
Safety instructionsLoad-bearing point: max. capacity 2.0 t.
2750
500
117
12
Item no. Weight kg
DOMINO Panel Formwork
111665 4,360 Spindle Shaft Panel DSEFor use with Shaft Panel DSE. For spindling back
to the starting position. 1 piece per Shaft Panel
DSE.
Complete with2 x 105822 Pin Ø 20 x 102, galv.
2 x 022230 Cotter Pin 5/1, galv.
NoteSpanner size SW 24.
230
150
66
248
SW 24
101927
108855
16,200
17,900
Stopend Panels DOMINO AT 250Stopend Panel DOMINO AT 250 x 3Stopend Panel DOMINO AT 250 x 5Outside piece for stopend formwork.
NoteConcrete cover approx. 30 or 50 mm.
2500
210
117
210
117
AT 250 x 3 AT 250 x 5
101928
101929
101930
101931
27,100
31,200
36,000
39,700
Stopend Panels DOMINO MTF 250Stopend Panel DOMINO MTF 250 x 20Stopend Panel DOMINO MTF 250 x 24/25Stopend Panel DOMINO MTF 250 x 30Stopend Panel DOMINO MTF 250 x 35/36With water stop bar for stopend formwork.
B 118
158
218
268
2500
B
120
13
Item no. Weight kg
DOMINO Panel Formwork
066040 47,300 Panel D 125 x 100Panel with steel frame and formlining 15 mm.
1250
280
930
40
1000 117
066041 38,700 Panel D 125 x 75Panel with steel frame and formlining 15 mm.
1250
4024
093
040
750 117
066043 28,600 Panel D 125 x 50Panel with steel frame and formlining 15 mm.
1250
280
930
40
500 117
066044 18,600 Panel D 125 x 25Panel with steel frame and formlining 15 mm.
1250
280
930
40
250 117
14
Item no. Weight kg
DOMINO Panel Formwork
066050 31,000 Panel DA 125 x 100Panel with aluminium frame and formlining 15 mm.
1000
1250
280
930
40
117
066051 24,800 Panel DA 125 x 75Panel with aluminium frame and formlining 15 mm.
4024
093
040
1250
750 117
066042
066052
43,700
27,300
Multi Panels DM/DMA 125Multi Panel DM 125 x 75Multi Panel DMA 125 x 75Panel Steel/Alu with formlining 15 mm. For oblique
angle, wall connections etc..
Complete with46 x 030290 Plug Ø 20 mm
280
932
38
1250 45 66022 x 30 = 45
75011
7
066047 21,300 Articulated Corner DGE 125Made of aluminium. For oblique angles from 75°
for the outside and inside.
Complete with1 x 066100 Corner Locking DEA 90°
280
930
40
1250
250 250
117
250
15
Item no. Weight kg
DOMINO Panel Formwork
066048
101964
4,030
5,940
Wall Thickness Compensators DWD 125Wall Thickness Compensator DWD 125 x 5Wall Thickness Compensator DWD 125 x 10For adaptating to different wall thicknesses.
280
930
40
1250 5027
117
10027
117
066046 5,490 Outside Corner Angle DAW 125For panel connection at 90° external corners.
1250 117
117
066053 2,070 Filler Support DPA 125For infillings with 21 mm plywood.
1240
93/8
745
111655 77,100 Shaft Panel DSE 125For lifting complete internal formwork in shafts.
Safety instructionsLoad-bearing point: max. capacity 2.0 t.
1250 500
117
16
Item no. Weight kg
DOMINO Panel Formwork
101934
108856
8,140
8,980
Stopend Panels DOMINO AT 125Stopend Panel DOMINO AT 125 x 3Stopend Panel DOMINO AT 125 x 5Outside piece for stopend formwork.
NoteConcrete cover approx. 30 or 50 mm.
1250 210
117
117
210
AT 125x3 AT 125x5
101935
101936
101937
101940
14,600
15,200
17,500
19,300
Stopend Panels DOMINO MTF 125Stopend Panel DOMINO MTF 125 x 20Stopend Panel DOMINO MTF 125 x 24/25Stopend Panel DOMINO MTF 125 x 30Stopend Panel DOMINO MTF 125 x 35/36With water stop bar for stopend formwork.
B 118
158
218
268
1250 B
120
066064 12,100 Panel D 75 x 25Panel with steel frame and formlining 15 mm.
750
280
430
40
250 117
066063 19,300 Panel D 75 x 50Panel with steel frame and formlining 15 mm.
117500
750
280
430
40
066061 26,600 Panel D 75 x 75Panel with steel frame and formlining 15 mm.
750
750
117
280
430
40
17
Item no. Weight kg
DOMINO Panel Formwork
066060 32,400 Panel D 75 x 100Panel with steel frame and formlining 15 mm.
1000
750
280
430
40
117
066062 31,600 Multi Panel DM 75 x 75Panel with steel frame and formlining 15 mm.
For oblique angles, wall connections, stopend
formwork etc.
Complete with23 x 030290 Plug Ø 20 mm
750
280
432
38 45 66022 x 30 = 45
750
117
066067 12,800 Articulated Corner DGE 75Made of aluminium. For oblique angles from 75°
for the outside and inside.
Complete with1 x 066100 Corner Locking DEA 90°
750
280
430
40
250 250
117
250
066068 2,520 Wall Thickness Compensator DWD 75 x 5For adaptating to different wall thicknesses.
280
430
40
750
5027
117
066066 3,500 Outside Corner Angle DAW 75For panel connection at 90° external corners.
750
117
117
066100 1,470 Corner Locking DEA 90°For 90° inside corners.
60 165
120
120
18
Item no. Weight kg
DOMINO Panel Formwork
066095 1,060 Positioning Pin DGE 135° internalFor 135° internal corners.
Complete with2 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv.
40
308
M 12x40
066097 1,560 Positioning Pin DGE 135° externalFor 135° external corners.
Complete with2 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv.
40
470
M 12x40
066080 3,630 Alignment Coupler DRSFor all DOMINO panel connections.
Compensations up to 12 cm possible.
28812
7
max 173
259
61
066081 1,160 Wedge Clamp DKSFor standard DOMINO panel connections not
under high load.
151
133
25
109
066084 8,510 Compensation Waler DAR 80For length compensations, height extensions,
stopend formwork and special applications for
DOMINO. With captive connection components.
790
4040
112
60
165
19
Item no. Weight kg
DOMINO Panel Formwork
066085 6,570 Scaffold Bracket DG 85For assembly of working and concreting scaffolds
for DOMINO.
Technical DataPermissible load 150 kg/m2 with maximum width
of influence 2.00 m.
1044
653
45
034580 3,520
Accessories
Guardrail Post HSGP
106877 2,730 Guardrail Post Holder DOMINOFor assembly of guardrails on DOMINO panels.
Complete with1 x 018060 Cotter Pin 4/1, galv.
Technical DataMaximum width of influence 2.00 m.
349
146
142
28
213
034580 3,520
Accessories
Guardrail Post HSGP
034580 3,520 Guardrail Post HSGPAs guardrail for different systems.
35
120
440
1050
1300
65
110406 2,100 Stopend Tie-2 DSAFor transferring forces from the stopend formwork
to the DOMINO panels. Thread DW 15.
443
9515
0
174
DW 15
20
Item no. Weight kg
DOMINO Panel Formwork
066082 1,040 Brace Connector DRAFor connecting push-pull props and kickers to
DOMINO panels.
Complete with1 pc. 027170 Bolt Ø 16 x 42, galv.
1 pc. 018060 Cotter Pin 4/1, galv.
117
120 98
68
Ø16x42
030290 0,002 Plug Ø 20 mmFor sealing tie holes Ø 20 mm, which are not
required.
NoteDelivery unit 500 pieces.
13
25Ø
21Ø
027680 49,600 Connector SB-1,2 - MX/TR/DFor assembling Brace Frame SB-1,2 to MAXIMO,
TRIO and DOMINO panels.
Safety instructionsLoad-bearing point load capacity 1.0 t with a
crane sling angle ≤ 15°.
60
1770
min
1270
max
1650
250
12049
065
026
516
0
21
240
027690
027590
113255
114107
0,368
2,400
0,433
1,250
Accessories
Bolt Ø 19 x 165, galv.Hook Strap SB-1, 2Bolt SB-MAXIMO, galv.Sleeve SB-MAXIMO, galv.
025740 9,140 Connector SB-A, B, C - MX/TR/DFor assembling SB-A0, A, B, C to MAXIMO, TRIO
and DOMINO panels.
NoteOne for each tie point.
125
130
120
130
027690
113255
114107
0,368
0,433
1,250
Accessories
Bolt Ø 19 x 165, galv.Bolt SB-MAXIMO, galv.Sleeve SB-MAXIMO, galv.
21
Item no. Weight kg
DOMINO Panel Formwork
027690 0,368 Bolt Ø 19 x 165, galv.For panel formwork with 12 cm overall height.
125
165
Ø19
066090 2,480 Foundation Tie Clamp DOMINO DLSFor anchoring foundation formwork in combination
with the Perforated Foundation Tie.
NoteSpanner size SW 14.
170
34
SW 14
152
023020 0,676 Perforated Foundation Tie, 25 m rollFor use with Foundation Tie Clamp TRIO, DOMINO
and HANDSET.
Technical DataPermissible tension force 12,9 kN
50
20
2250
066086 1,100 Top Tie Bracket DAH, galv.For tying at any position outside of the frame,
particularly for foundations.
100
100
88
Ø20,5
066091 6,330 Lifting Hook DOMINO 500 kgFor transporting DOMINO panels.
Safety instructionsAlways use 2 pieces per transportation unit.
Follow Instructions for Use.
Load capacity 500 kg.
5551
2
187 100
195
11280
22
Item no. Weight kg
DOMINO Panel Formwork
066094 7,980 Stacking Device DOMINO, galv.For stacking and transportation of 2-8 DOMINO
panels of all sizes. Suitable for crane and fork-lift
transportation. 4 pieces per stack.
Safety instructionsFollow Instructions for Use.
Load-bearing capacity: 250 kg per device, 1 t per
stack.
100
1115
125
066093 0,020 Stacking Device DOMINO DSHPlastic. Prevents the element from sliding side-
ways.
55
3019
066099 0,030 Stacking Aid DOMINO DSWFor stacking DOMINO panels. 4 pieces per stack.
49
50
50
23
24
02 PERI S.A.S.
77109 Meaux Cedex
www.peri.fr
03 PERI AG
8472 Ohringen
www.peri.ch
04 PERI S.A. Sociedad
Unipersonal
28110 Algete/Madrid
www.peri.es
05 N.V. PERI S.A.
1840 Londerzeel
www.peri.be
06 PERI B.V.
5480 AH-Schijndel
www.peri.nl
07 PERI Formwork Systems, Inc.
Elkridge, MD 21075
www.peri-usa.com
08 PT Beton Perkasa Wijaksana
Jakarta 10210
www.peri.de
09 PERI S.p.A.
20060 Basiano (MI)
www.peri.it
10 PERI Japan K.K.
Tokyo 103-0015
www.perijapan.jp
11 PERI Ltd.
Rugby, CV23 0AN
www.peri.ltd.uk
12 PERI Kalıp ve İskeleleri
Kıraç - Büyükçekmece/
Istanbul 34500
www.peri.com.tr
13 PERI Kft..
1181 Budapest
www.peri.hu
14 PERI Formwork Malaysia
43300 Seri Kembangan,
Selangor DE
www.perimalaysia.com
15 PERI ASIA Pte. Ltd
Singapore 387355
www.periasia.com
16 PERI Ges.mbH
3134 Nußdorf ob der Traisen
www.peri.at
17 PERI spol. s r.o.
252 42 Jesenice
www.peri.cz
18 PERI Danmark A/S
2670 Greve
www.peri.dk
19 PERI Suomi Ltd. Oy
05460 Hyvinkää
www.perisuomi.fi
20 PERI NORGE AS
3036 Drammen
www.peri.no
21 PERI Polska Sp. z o.o.
05-860 Płochocin
www.peri.pl.pl
22 PERIform SVERIGE AB
30013 Halmstad
www.periform.se
23 PERI (Korea) Ltd.
Seoul 135-080
www.perikorea.com
24 PERIcofragens Lda.
Linda-a-Pastora
2790-326 Queijas
www.peri.pt
25 PERI S.A.
(1625) Escobar/Prov. Bs. As.
www.peri.com.ar
26 PERI Formas e
Escoramentos Ltda.
CEP 06730-000
Vargem Grande Paulista
São Paulo
www.peribrasil.com.br
27 PERI Chile Ltda.
Colina, Santiago de Chile
www.peri.cl
28 PERI România SRL
077015 Baloteşti - ILFOV
www.peri.ro
29 PERI SLOWENIEN
2000 Maribor
www.peri.de
30 PERI spol. s r.o.
903 01 Senec
www.peri.sk
31 PERI Australia Pty. Ltd.
Glendenning NSW 2761
www.periaus.com.au
32 PERI AS
76406 Saku vald
Harjumaa
www.peri.ee
33 PERI Hellas Ltd.
194 00 Koropi
www.perihellas.gr
34 PERI SIA
1057 Riga
www.peri-latvija.lv
35 PERI (L.L.C.)
Dubai
www.perime.com
2
1
3
4
5
6
9
11
12
1316
17
18
19
20
22
21
24
2829
30
32
33
34
38
41
42
46
48
52
53
61
01 PERI GmbH Rudolf-Diesel-Strasse
89264 Weissenhorn
www.peri.com
France
Switzerland
Spain
Belgium/Luxembourg
Netherlands
USA
Indonesia
Italy
Japan
United Kingdom/Ireland
Turkey
Hungary
Malaysia
Singapore
Austria
Czech Republic
Denmark
Finland
Norway
Poland
Sweden
Korea
Portugal
Argentina
Brazil
Chile
Romania
Slovania
Slovakia
Australia
Estonia
Greece
Latvia
United Arab Emirates
PERI International
25
36 PERI Formwork Systems, Inc.
Bolton, Ontario
L7E 1K1
www.peri.ca
37 PERI GmbH
Beirut
P.O. Box 90 416 Jdeidet
www.peri.de
38 PERI UAB
02300 Vilnius
www.peri.lt
39 PERI S.A.
Tanger
www.peri.de
40 PERI Formwork
Engineering Ltd
49002 Israel
www.peri.co.il
41 PERI BULGARIA EOOD
1839 – Sofia
www.peri.bg
42 MEST ltd.,
220 Hafnarfjordur
www.mest.is
43 TOO PERI Kazakhstan
050010 Almaty
www.peri.kz
44 OOO PERI
142403 Noginsk
www.peri.ru
45 PERI Wiehahn (Pty.) Ltd.
Bellville 7535
www.periwiehahn.co.za
46 TOW PERI Ukraina
07400 Brovary
www.peri.ua
47 PERI GmbH
11361 Heliopolis
Cairo
www.peri.com.eg
48 PERI Oplate d.o.o.
11272 Dobanovci [email protected]
www.peri.co.yu
49 PERI Cimbras y Andamios,
S.A. de C.V.
Estado de México,
C.P. 54680
www.peri.com.mx
50 PERI Kalıp ve İskeleleri
Baku
www.peri.com.tr
51
PERI Kalıp ve İskeleleri
744035 Aşgabat
www.peri.com.tr
52 PERI Belarus
220030 Minsk
www.peri.com.tr
53 PERI oplate i skele d.o.o.
10 250 Donji Stupnik/
Zagreb
www.peri.com.hr
54 PERI GmbH
Building No. 4
P.O. Box 1939793669
Teheran-Iran
www.peri.ir
55 PERI (India) Pvt Ltd
Mumbai – 400064
www.peri.in
56 PERI Jordan
11947 Amman
www.peri.de
57 PERI Kuwait
13011 Kuwait
www.peri.de
58 PERI Saudi Arabia
Jeddah - 21463
K.S.A
www.peri.de
59 PERI Qatar LLC
Doha
www.peri.de
60 Société PERI S.A.S.
Kouba - Alger
www.peri.fr
61
Autostrada TIRANE-DURRES
Tirane / ALBANIA
www.peri.com.tr
62 PERI Peruana SAC
Lima/Peru
www.peri.com.pe
63 PERI Panama Inc.
587 Panama City
www.peri.com.pa
7
8
10
1415
23
25
26
27 31
35
36
3739 40
43
44
45
4749
50 51
54
595558
5760 56
62
63
Canada
Libanon
Lithuania
Marocco
Israel
Bulgaria
Iceland
Kazakhstan
Russian Federation
South Africa
Ukraine
Egypt
Serbia
Mexico
Azerbaijan
Turkmenistan
Belorussia
Croatia
Iran
India
Jordan
Kuwait
Saudi Arabia
Qatar
Algeria
Albania
Peru
Panama
D e
01/2
010 10m
a A
rt.-
Nr.:
790352
© C
opyright
by P
ER
I G
mbH
Wall FormworkPanel Formwork
Girder Formwork
Circular Formwork
Facade Formwork
Brace Frame
Column FormworkSquare
Rectangular
Circular
Slab FormworkPanel Formwork
Beam Grid Formwork
Girder Formwork
Slab Table
Beam Formwork
Shoring SystemsSteel Slab Props
Aluminium Slab Props
Tower Systems
Heavy-Duty Props
Climbing SystemsClimbing Scaffold
Self-Climbing System
Climbing Protection Panel
Platform Systems
Scaffold, Stairways, Working PlatformsFacade Scaffold
Working Platform
Weather Protection Roof
Stairway Access
Bridge and Tunnel FormworkCantilevered Parapet Carriage
Cantilevered Parapet Platform
Engineer’s Construction Kit
ServicesFormwork Assembly
Cleaning / Repairs
Formwork Planning
Software
Statics
Special Constructions
Additional Systems
Plywood
Formwork Girders
Stopend Systems
Pallets
Transportation Containers
PERI GmbHFormwork Scaffolding EngineeringP.O. Box 1264
89259 Weissenhorn
Germany
Tel +49 (0)73 09.9 50- 0
Fax +49 (0)73 09.9 51- 0
www.peri.com
PERI Product Range
