Embed Size (px)
Citation preview
Ceramic Coatings for efficient processing
CeraNovis GmbH Tel.: +49 68 1500 1500 Untertürkheimer Str. 25 Fax: +49 68 1500 1599 D 66117 Saarbrücken : [email protected] www.ceranovis.com
Benefit
No maintenance and cleaning intervention
No contamination (black traces) on products
Reliable processing parameters
Improved productivity
Better environment
Let your process flow!
PERMANENT RELEASE COATING FOR OPEN MOULDS
MAINTENANCE-FREE PROCESSING OVER WEEKS
Nanocomp MI is applied thinly on the metal
substrate. With the heat energy of the flowing
melt, the coat sinters to a robust, elastic and
inert ceramic.
Nanocomp MI provides protection and release
effect for highly extended service time - for se-
veral thousand castings. A coat refresh is pos-
sible and easy to handle.
Consumption is low and service time high. Coat
built-up in a mould is avoided for a moulds life.
No mould cleaning intervention anymore.
That leads to a non decreasing heat transfer,
keeping the ICM speed stable.
Coatings for Casting and Melt Handling
Nano-Ceramic Coating for Light Metal Ingot Casting
Nanocomp MI coatings are designed to be
used on metal substrates. Some few kgs of Na-
nocomp MI replace tons of traditional release
agents like graphite, boron nitride or canola oil.
Nanocomp MI grants excellent heat transfer and
in that way a improved ICM efficiency. No need
to lower the ICM speed due to increating coat
layers.
Nanocomp MI10 is designed for Ingot
conveyors with steel moulds with exceeded
mould temperatures and water cooling from top.
MI10 is used for aluminium and magnesium
melts.
Nanocomp MI18 is designed for iron open
moulds (sows, piglets, ingots). MI18 is applied
with slightly higher thickness and provides
excellent release properties. Nanocomp MI18 is
recommended for melts of aluminium, aluminium
alloy, pure zinc (5N), zinc alloy, lead and others.
