Permitted F-111 Venting

These venting templates are for the 2018 thru 2020 Polaris 600R vehicles only. No deviation from these template locations/hole size is allowed. To download the

venting templates visit the Polaris Snowmobile Racing website at

https://snowmobiles.polaris.com/en-us/team-polaris/racer-resources/

This is allowed in all F-111 classes

Small holes are to be drilled to 5/8” Large holes are to be drilled to 1”

Small holes are to be drilled to 5/8” Large holes are to be drilled to 1”

Holes drilled from templates (use a step bit to drill holes)

Holes drilled from templates (use a step bit to drill holes)

It is recommended to install Frogzskin screen (#10032) over the vents in front of the primary clutch.

LEFT

/8” holes

/8” holes

RIGHT