PERSONAL INFORMATION Ismar ALAGIĆ, Ph.D.EU R O P E A N C U R R I C U L U M V I TA E F O R M AT Curriculum Vitae

E U R O P E A N C U R R I C U L U M V I T A E F O R M A T Curriculum Vitae

Ismar ALAGIĆ, Ph.D.

© European Union, 2002-2013 | http://europass.cedefop.europa.eu Page 1 / 24

PERSONAL INFORMATION Ismar ALAGIĆ, Ph.D.

Mustafe Ćemana bb, BA-74264 Jelah, Tešanj, Bosnia and Herzegovina

+387 (32)65 0 022; 65 06 08; 65 03 90 (business); +387 (32)66 62 86 (home); +387(0)61 79 28 08; 62 99 30 55

[email protected] ; [email protected]; [email protected] (private) [email protected] ; [email protected]; [email protected] (business) Skype: ismar_alagic LinkedIn: Ismar (Dr.sci.) Alagić Twitter: @IsmarAlagicDr Facebook: Ismar Alagic, Novi Profil

Sex Male | Date of birth December 28, 1973.| Nationality Bosnia and Herzegovina (Bosniak)

WORK EXPERIENCE

Dates (from - to) Name and address of employer Type of business or sector Occupation or position held Main activities or responsibilities

January 2014-Onwards

TRA Tešanj Development Agency,Trg Alije Izetbegovića 11, BA-74260 Tešanj Local Development Agency, Municipal Development Agency, Municipality of Tešanj Chief Executive Manager (CEO) - Director -Setting up of TRA legal entity in accordance with national by law; -Responsible for management of TRA; -Responsible for implementation of TRA business policy, according to the vision and development strategy of Tešanj Municipality; -To promote TRA activities among target group (Public, Private and Civic sector); -Expansion of partner target group; -Providing leadership to position the Agency at the forefront of the local economic development; -Propose ideas related to marketing activities and hire of external associates; -Communicate with representatives from printing and electronics media in relation issues important to TRA; -Responsible for hiring of all required external associates; -Responsible for preparation and implementation of analysis and studies related to customer/partner satisfaction; -Business operation analysis; -Support to technological development; - Establishing of International cooperation; - Responsible for management of the Centre for adult education Tešanj as unit within TRA Agency; -Responsible for following line of business: Project Management; Databases, statistics and analysis; Promotion of economic potential; Public-private dialogue; Training of workforce; Rural Development and; Environment protection and Energy efficiency; -Responsible for management of BEAR init on the behalf of Tešanj Municipality; -Responsible for cooperation with GIZ Prolocal; -Responsible for management of PRO-Future project supported by USAID, on the behalf of Tešanj; -Responsible for cooperation with Habitat in the field of energy efficiency, supported by USAID; -Belong to Municipal Project Implementation Team of WATSAN supported by EIB-field of waste water management; -Belong to Local Economic Development Council of Tešanj Municipality; -Coordinate administration of Local Economic Development Council of Tešanj Municipality; - Responsible for cooperation with Aid Charity Al Qatariya- Raspberry plants; - Responsible for cooperation with USAID/Sida FIRMA project; -Communicate with USAID/Sida GOLD project; - Responsible for implementation of CO-BEAR (Competitiveness of Business Excellence Area) project; -Reporting to shareholders/parent board on organisational plans and performance; - Build a fundraising network using personal contacts, direct mail and foundation support; -Execute the responsibilities of TRA Agency Director according to lawful and ethical standards, as referenced in Charter of establishment.

mailto:[email protected]






Curriculum Vitae Ismar ALAGIĆ, Ph.D.


Dates (from - to)

Name and address of employer

Type of business or sector

Occupation or position held

Main activities or responsibilities

Dates (from - to)





Dates (from - to)





July 2013-January 2014 TRA Tešanj Development Agency, Trg Alije Izetbegovića 11, BA-74260 Tešanj, B&H Local Development Agency, Municipal Development Agency Proffesional associate - Expert for European Integration

-Managing of Project Implementation Team “Water supply and sanitation in Tešanj Municipality”; - Recruiting, selecting and developing members of Municipal Development Council; - Developing a strategic plan for local economic development – Economical Division; - Identifying, developing and directing the implementation projects from Development Strategy of Municipality Tešanj for access to funding; - Establishing of International cooperation; - Promoting local authority to local, regional, national, and international constituencies; - Build a fundraising network using personal contacts, direct mail and foundation support; July 2009-July 2013. Municipality Tešanj, Trg Alije Izetbegovića 11, BA-74260 Tešanj, B&H Local Authority Counselor of Mayor for access to EU-funds

- Managing of Municipal Development Team;

- Recruiting, selecting and developing Team members;

- Developing a strategic plan for local economic development;

- Identifying, developing and directing the implementation projects from Development Strategy of Municipality Tešanj for access to funding;

- Planning and directing the organization’s activities to achieve stated/agreed targets and standards for economic performance, quality, culture and legislative adherence;

- Establishing of International cooperation;

- Promoting local authority to local, regional, national, and international constituencies;

- Build a fundraising network using personal contacts, special events, and foundation support;

- Developing organizational culture, values and reputation in its contacts and with all staff, partners and regulatory/official bodies;

January 2009-June 2009 ARTECO Wood Technology Center Ltd, Medakovo bb, BA-74260 Tešanj, B&H Wood Technology Center (through Excellence in Innovation project supported by USAID and Norwegian Ministry of Foreign Affairs) CEO (Chief Executive Officer), Managing Director

- Setting up ARTECO legal entity in accordance with national by laws;

- Responsible for management of ARTECO Wood Technology Centre;

- Responsible for implementation of ARTECO business policy, according to the vision and strategy of Excellence in Innovation (EI) project;

- To promote ARTECO activities among target group;

- Expansion of customer target group;

- Providing leadership to position the company at the forefront of the wood processing industry;

- Responsible for specifying additional educational contents; - Responsible for preparation and realization of 3D CAD modelling and design related education/training, in cooperation with ARTECO Technical Manager; -Training of Solid Works and Solid CAM as lecturer; - Responsible for preparation and realization of CNC machine operations training, in cooperation with ARTECO Technical Manager; -Training of CNC programming (EMCO, Homag, Masterwood CNC machine) as lecturer; -Preparation of material for ARTECO web site; - Responsible for preparation and implementation of analysis related to customer satisfaction; - Business operation analysis; - Propose ideas related to marketing activities and hire of external associates; - Communicate with representatives from printing and electronics media; - Reporting to shareholders/parent board on organizational plans and performance; - Execute the responsibilities of a company director according to lawful and ethical standards;




Dates (from - to) March 2005-December 2008

Name and address of employer REZ Ltd Zenica, REZ Regional Development Agency for Central B&H Region Štrosmajerova 11/III, BA-72000 Zenica, B&H

Type of business or sector Regional Development Agency (supported by EURED project; CHF; Sida, Dutch Embassy)

Occupation or position held Counselor of Director, Technology and Cluster Manager

Main activities or responsibilities - Coordinated Wood processing Cluster in Central B&H region and developed links and

relationships with CCA USAID project and wood processing companies and institutions and programs working on similar issues in the region of South East Europe (SEE);

- Coordinating Technology Park Capacity Building in the region of Central BiH; - Coordinating Wood Technology Center Building in the region of Central BiH;

- Responsible for preparation and realization of CNC machine operations training; - Managed the process of doing Feasibility Study on Wood Waste Utilisation as renewable

source of energy in Central B&H region; -Monitoring the process of doing Feasibility Study on Wood Waste Utilisation as renewable

source of energy in Northern Montenegro region; Key Achievements: -Successfully took part in implementation CCA USAID project, Wood-processing and forestry Cluster in Central B&H region; -Co-Author of document are as follows: 1) I Alagić, A.Abramušić:"Analysis of the existing production technologies level in wood processing industry and specification of needs“, REZ Regional Development Agency Central BiH region, 2005, Zenica, Bosnia and Herzegovina (Available at:: www.rez.ba) 2) I. Alagić, A.Abramušić:"Analysis of the available working force in wood processing industry compared with the industry needs“, REZ Regional Development Agency Central BiH region, 2005, Zenica, Bosnia and Herzegovina (Available at:: www.rez.ba)

3) I. Alagić and others:"Feasibility study of waste wood commercial utilization in Central

Bosnia and Herzegovina as a resource recovery and economic development project in the region", REZ Regional Development Agency Central BiH region, 2006. (Available at:: www.rez.ba)

Dates (from - to) February 2001-February 2005 Name and address of employer FAD Jelah-Tešanj, Titova bb, BA-74264 Jelah, Tešanj, B&H Type of business or sector Automotive Industry, Automobile parts, Braking system and wheel transmission parts Occupation or position held Chief Manager of R&D and Engineering Department

Main activities or responsibilities - Developing methodological instruction on standard products and a new products development process;

- Getting new clients;

- Responsible for preparation and realization of 3D CAD modelling and design by ALGOR software;

- Preparing and managing projects’ plans (resources, tasks, dead lines, inputs and outputs);

- Implementation of projects in the field (Consulting on QMS implementation according to customer specific requirements (ISO/TS 16949,VDA 6.1, EQQF, etc.);

-Design of Production Systems, Business Plan Preparation; Feasibility Study Preparation; Support to Development of SMEs; Engineering, Consulting, Training, Monitoring; Reengineering of Manufacturing Systems etc.) with particular focus in the automotive sector and metalworking industry;

- Developing training materials (course curricula, participant’s hand outs, cases, tests, teacher’s notes);

- Delivering training programs (mostly to senior management staff of automotive enterprises);

http://www.rez.ba/

http://www.rez.ba/

http://www.rez.ba/



Dates (from - to) September 1998-Februar 2001 Name and address of employer Pobjeda Tešanj, Bukva bb, BA-74260 Tešanj, B&H

Type of business or sector Automotive industry, Pumps and filters (water pump, oil pump, hydraulic pump, gear pumps)

Occupation or position held Main Designer (Oil gear pump), R&D Department

Main activities or responsibilities -Developing a new product; -Testing of gear pumps

- Implementation of projects in the field ( QMS implementation according to requirements of standard ISO 9001; -Key user of ERP Baan software;

Dates (from - to) January 2014-onwards (Part-time engagement)

Name and address of employer University of East Sarajevo, Faculty of Traffic in Doboj, Vojvode Mišića 52, 74000 Doboj,B&H,

Type of business or sector University ,

Occupation or position held Assistant Professor Main activities or responsibilities Lecturer and Investigator, Subject: Expert systems

Dates (from - to) January 2010.-2015 (Part-time engagement)

Name and address of employer University of Zenica, , Fakultetska 3,BA.-72000 Zenica, B&H

Type of business or sector University, Faculty of Mechanical Engineering in Zenica, Politechnic Faculty

Occupation or position held Assistant Professor

Main activities or responsibilities Lecturer and Investigator, Subject: Disassembly and assembly technology; Chair: Maintenance Dates (from - to) June 2005-Januar 2010. (Part-time engagement) Name and address of employer University of Zenica, , Fakultetska 3,BA.-72000 Zenica, B&H

Type of business or sector University, Faculty of Mechanical Engineering in Zenica, Politechnic Faculty Occupation or position held Senior Assistant

Main activities or responsibilities Lecturer and Investigator, Chair: Computer Integrated Manufacturing and Industrial Engineering, Field: Production System

Dates (from - to) November 2001-May 2005. (Part-time engagement) Name and address of employer University of Zenica, , Fakultetska 3,BA.-72000 Zenica, B&H

Type of business or sector University, Faculty of Mechanical Engineering in Zenica

Occupation or position held Assistant

Main activities or responsibilities Lecturer and Investigator, Chair: Computer Integrated Manufacturing and Industrial Engineering, Field: Production System

Dates (from - to) April 2016-Onwards (Part-time engagement) Name and address of employer University of Zenica, , Fakultetska 3,BA.-72000 Zenica, B&H

Type of business or sector University, Faculty of Mechanical Engineering in Zenica,

Occupation or position held Assistant Professor

Main activities or responsibilities Lecturer and Investigator, Subjects: Disassembly and assembly technology;

Designing of maintenance systems Chair: Maintenance

EDUCATION AND TRAINING

Dates (from - to)

Name and type of organisation

February 2006-November 2008

University “Džemal Bijedić” in Mostar, Faculty of Mechanical Engineering in Mostar




providing education and training

Principal subjects/occupational

skills covered

Title of qualification awarded Level in national classification

Dates (from - to)

Name and type of organisation providing education and training


skills covered

Title of qualification awarded

Level in national classification

Dates (from - to)



skills covered



Dates (from - to)



skills covered



Dates (from - to)



skills covered



Dates (from - to)



skills covered



Dates (from - to)



skills covered



Economics and Organisation, Quality Management System, PhD thesis “Contribution to Development of Model for Quality System Assessment within Supply Chain Management of Automotive Industry”

PhD. Doctor of Technical Science (Dr.sc.), IX September 1998 – June 2004 University of Zenica, Faculty of Mechanical Engineering in Zenica Quality Management, Postgraduate study, Master thesis”Designing of Metrology System as a part of Quality Assurance System in Company from Automotive Industry” MSc. Master of Technical Science (Mr.sc.) , VII December 1992 – August 1998 University of Sarajevo, Faculty of Mechanical Engineering in Zenica Production Mechanical Engineering, Diploma thesis “Study of Optimal Selection for Modern Diesel Engine, power 80/100 kW concerning “ BSc. BSc. M.E. (VII-VSS-Dipl.inž.maš.) December 2014-August 2015. Federal Ministry for Development, Enterpreneurship and Craaft, Mostar, BiH CNC programming training with basic knowledge about mechanotronics & 3D modelling CNC operater Lecturer January 2015. USAID Sustainable Economic Development Project in Serbia, DCG Consulting, Beograd, Vrnjačka Banja, Serbia Collecting, Archiving, Processing, Analyse and Recording Data of Private Business Sector Databases of Private Business Sector – LEDIS software Consultant / Lecturer - January 2015. Educational Centre Velenje, Slovenia, Centre for adult education Tešanj, Tešanj 3D Printing Successfully completed course - December 2014. USAID Sustainable Economic Development Project in Serbia, DCG Consulting, Beograd, Andrevlje, Fruška Gora, Serbia Technique and methods for support to private business sector and investors in stage of start ups, growth and development od business Consultant / Lecturer -



Dates (from - to) December 2014.

Name and type of organisation SICI Dominus in association with Governance~20 Consortium

providing education and training Project financed by European Union, Ministry for Justice of BiH, DEI BiH, Laktaši,BiH Principal subjects/occupational Regional forum “Europe for Citizens 2014-2020”

skills covered International Europe for Citizens Project Development Forum

Title of qualification awarded Successfully completed course

Level in national classification -

Dates (from - to) November 2014.-onwards

Name and type of organisation CO-BEAR, Competitiveness of Business Excellence Area Teslić-Tešanj-Žepče

providing education and training Project financed by Delegation of the European Union to BiH, Sarajevo

Principal subjects/occupational VII Call for proposal, IPA I (2007-2013)

skills covered

Title of qualification awarded Project director


Dates (from - to) November 2014.

Name and type of organisation Government of Croatia, Office for Associations, Contact point for EfC, Zagreb,

providing education and training Croatia

Principal subjects/occupational Regional forum “Europe for Citizens 2014-2020”

skills covered

Title of qualification awarded Successfully completed course


Dates (from - to) September 2014.

Name and type of organisation GIZ Prolocal


Principal subjects/occupational BEAR Investment Conference, Competitiveness Analysis of Metalworking

skills covered and Foodprocessing sectors in Municipality of Tešanj, Sarajevo, BiH

Title of qualification awarded Project Leader


Dates (from - to) August 2014.-onwards

Name and type of organisation Aid Charita Al-Qatariya


Principal subjects/occupational Raspberry plants in Tešanj Municipality

skills covered



Dates (from - to) March-April 2014.

Name and type of organisation EMCO industrial training, EMCO MAIER Ges.m.b.H, Salzburger, Austria


Principal subjects/occupational Operating machine Concept Mill 55 with WinNC Sinumerik 810/840D,

skills covered CNC Programming

Title of qualification awarded Successfully completed conference /completed Competetive analysis


Dates (from - to) March 2014-onwards

Name and type of organisation USAID, CRS Catholic Relief Service


Principal subjects/occupational Project PRO-Future (Confidence, Understanding, Responsibility)

skills covered

Title of qualification awarded Municipal Project Coordinator


Dates (from - to) March 2014.

Name and type of organisation EU Support for the Establishment and Stregthening of Business Infrastructure Designed to




providing education and training Improve SME Competitiveness (EUSESBI), WYG, Jahorina, BiH

Principal subjects/occupational Marketing and Promotion of Business Zones in order to attract potential Investors

skills covered

Title of qualification awarded Certificate of attendance (Successfully completed course)


Dates (from - to) January 2014-onwards

Name and type of organisation HABITAT (REELIH project), USAID

and training providing education and training

Principal subjects/occupational RESIDENTIAL ENERGY EFFICIENCY FOR LOW INCOME HOUSEHOLDS

skills covered

Title of qualification awarded Municipal Project Coordinator


Dates (from - to) December 2013 - July 2014.

Name and type of organisation USAID/Sida FIRMA, Fostering Interventions for Rapid Market Advancement ,CARDNO


Principal subjects/occupational The Centre for adult education Tešanj, Tešanj, BiH

skills covered



Dates (from - to) January 2014.

Name and type of organisation Chamber of Commerce of Venice, Enterprise Europe Network, Venice, Italy


Principal subjects/occupational IPA CBC Adriatic 2007-2013, Final conference “Adriatic Economic Cluster Club”

skills covered “Opportunities and strategies for the development of the marine industry”

Round table, Concrete proposal companies operating in the maritime industry

Title of qualification awarded Partner/Presentator, Successfully completed project


Dates (from - to) November 2013

Name and type of organisation EU Support for the Establishment and Stregthening of Business Infrastructure Designed to

providing education and training Improve SME Competitiveness (EUSESBI), WYG, Laktaši, BiH

Principal subjects/occupational Business Zones Development, Management and Administration

skills covered



Dates (from - to) October 2013

Name and type of organisation GIZ, Germany


Principal subjects/occupational Building Bridges, Transforming Public Administration in Eastern Europe

skills covered and Central Asia, Berlin, Germany



Dates (from - to) May -October 2013

Name and type of organisation GIZ Prolocal, BERCON Croatia, Kaja Consulting, Čakovec, Croatia


Principal subjects/occupational Management of EU programme/project for agriculture and rural development,

skills covered IPARD, Rural Development (Project management)

Title of qualification awarded Certificate (Successfully completed course of 4 seminars and exam)


Dates (from - to) September 2013

Name and type of organisation NALAS,Association of Cities and Municipalities in South East Europe


Principal subjects/occupational NEXPO 2013 Fair, Rijeka/Opatija, Croatia



skills covered




Name and type of organisation GIZ, Mesopartner, Berlin, Germany

providing education and training Dugopolje, Croatia

Principal subjects/occupational 1st School on Local Economic Development

skills covered



Dates (from - to) May 2013

Name and type of organisation COWI, Federal Ministry for agriculture, forestry and water supply,

providing education and training Vlašić , Bosnia and Herzegovina

Principal subjects/occupational Water supply and sanitation in Federation of Bosnia and Herzegovina,

skills covered Project management (implementation, finance, report)

Title of qualification awarded Head of Project Implementation Team, Certificate of attendance - 30 hours


Dates (from - to) April 2013

Name and type of organisation Foreign & Commonwealth Office UK, Ministry of Foreign Affairs BiH, Embassy of BiH in UK,

providing education and training FIPA, UK Trade & Investment, Developing Markets Associates, London, United Kingdom

Principal subjects/occupational UK-Bosnia and Herzegovina Trade & Investment Forum 2013, London

skills covered

Title of qualification awarded Certificate of attendance (Successfully completed panel and presentation)


Dates (from - to) February 2013.

Name and type of organisation European Commission, The Committee of the Regions, TAIEX, DG Enlargement,

providing education and training Brussels, Belgium

Principal subjects/occupational Seminar on EU Energy policy at local level

skills covered




Name and type of organisation Government of Croatia, Office of the Croatian Association,

providing education and training Zagreb/Varaždin, Croatia

Principal subjects/occupational Europe for Citizens, Regional Forum (Central and South East European Countries)

skills covered



Dates (from - to) October 2012

Name and type of organisation European Commission, The Committee of the Regions, TAIEX,

providing education and training DG Enlargement, Brussels, Belgium

Principal subjects/occupational Seminar on EU Regional Policy

skills covered



Dates (from - to) October 2012.

Name and type of organisation 3E USAID, UNDP-MDGF

providing education and training Technology Park INTERA, Mostar , BiH Principal subjects/occupational Energy Management in Buildings and Green Office, Energy Efficiency

skills covered







Name and type of organisation 3E USAID, UNDP-MDGF

providing education and training Faculty of Technology, Faculty of Mechanical Engineering, University of Tuzla

Principal subjects/occupational Energy Management in Buildings and Green Office Practices

skills covered



Dates (from - to) June 2012. Name and type of organisation European Commission, The Committee of the Regions, TAIEX,

providing education and training DG Enlargement, Brussels, Belgium

Principal subjects/occupational Seminar on Sustainable Tourism and the role of local authorities

skills covered



Dates (from - to) October 2011-June 2012

Name and type of organisation EPTISA


Principal subjects/occupational DELTER Support to meet the requirements of the Energy Community Treaty

skills covered for SEE focusing on Energy Efficiency (EE) and Renewable Energy (RE)

Title of qualification awarded Municipal Project Leader


Dates (from - to) April 2012. Name and type of organisation Tianjin TEDA Group Co., Ltd., China, Ministry of Commerce of China, Tianjin, China

providing education and training Principal subjects/occupational Seminar on the Construction and Management of Development Area for Central

skills covered and Eastern Europe Countries

Title of qualification awarded Certificate of attendance (Successfully completed course-Final report/presentation-exam)



Name and type of organisation GDI GISDATA,Belgrad, Serbia / Sarajevo Bosnia and Herzegovina,

providing education and training ESRI Authorised Training, Training & Support Center

Principal subjects/occupational GIS (Geographic Information System),

skills covered ArcGIS Desktop II:Tools and functionality;

Title of qualification awarded Certificate (Successfully completed course-Final report/exam)



Name and type of organisation GDI GISDATA,Belgrad, Serbia / Sarajevo Bosnia and Herzegovina, providing education and training ESRI Authorised Training, Training & Support Center

Principal subjects/occupational GIS (Geographic Information System),

skills covered ArcGIS Desktop III: GIS processes and analysis



Dates (from - to) December 2010.-June 2012.

Name and type of organisation MDGF Culture for Development, Improving Cultural Understanding in Bosnia and providing education and training Herzegovina, UNDP, UNESCO, UNICEF

Principal subjects/occupational Municipal Project Leader

skills covered

Title of qualification awarded Successfully completed project



Name and type of organisation Cross Border Institution Building – CBIB, Sarajevo, BiH

providing education and training An EU funded project



Principal subjects/occupational Training on evaluation of grant applications

skills covered




Name and type of organisation CIFAL & UNITAR United Nations Institute for Training and Research, Plock, Poland


Principal subjects/occupational International conference and workshop „Planning for Sustainable Urban

skills covered Development”



Dates (from - to) May-June 2011

Name and type of organisation EURELSMED EU Support to Institutional Capacity Building for Regional and Local

providing education and training Economic and SME Development, WYG, EU Delegation to BiH, Banja Vrućica, BiH

Principal subjects/occupational Project Cycle Management & Logical Framework Approach for Project Identification

skills covered and Development in the Context of Current/Future Funding Project,

Title of qualification awarded Certificate of course completion (Completed the Capacity Building Municipal Training Programme /exam)


Dates (from - to) February 2011

Name and type of organisation UNDP-United Nations Development Programme,

providing education and training Sida-Swedish International Development Agency , BiH, Sarajevo

Principal subjects/occupational Project cycle management, Project -Training for representative of local authorities”

skills covered



Dates (from - to) November 2010

Name and type of organisation UNDP-United Nations Development Programme,

providing education and training Sida-Swedish International Development Agency , BiH, Sarajevo

Principal subjects/occupational Local development management, Project -Training for representative of local

skills covered authorities”



Dates (from - to) November 2010-February 2011

Name and type of organisation Government of Federation of Bosnia and Herzegovina

providing education and training Chamber of Commerce of Federation of BiH, Sarajevo, BiH

Principal subjects/occupational Training Programme of President and members of Steering Board as well

skills covered as member of Board of Directors concerning companies state-owned

Title of qualification awarded Certificate PKF-120-145/11 (Successfully completed course-Final report/exam)


Dates (from - to) November-December 2010. Name and type of organisation CIFAL & UNITAR United Nations Institute for Training and Research, Plock, Poland


Principal subjects/occupational International conference and workshop „Urban wastewater management with a focus

skills covered on rainwater systems”



Dates (from - to) June 2010.

Name and type of organisation European Policy Information Centre, Financed by UK Government


Principal subjects/occupational Building Capacity for Rural Development; Project Development and Management

skills covered

Title of qualification awarded Certificate of attendance (Successfully completed course-Final report/exam)





Dates (from - to) April 2010.

Name and type of organisation CIFAL & UNITAR United Nations Institute for Training and Research, Plock, Poland


Principal subjects/occupational International conference and workshop „Public-Private Partnership in Investements in

skills covered Central and Eastern Europe




Name and type of organisation IDEA-Co, Methodology according to TÜV Akademia


Principal subjects/occupational Training of Internal Auditor of QMS (Quality Management System)

skills covered according requirements of EN ISO 19011

Title of qualification awarded Certificate of course completion (Successfully completed course- Final report/exam)



Name and type of organisation IB-Caddy d.o.o. Ljubljana, Slovenia;

providing education and training Authorised Training, Training & Support Center - SolidWorks

Principal subjects/occupational SolidWorks Essentials, 3D-CAD Moddeling (30 hours)

skills covered

Title of qualification awarded Certificate of course completion (Final report/exam) – Key user



Name and type of organisation National Institute of Research and Development in precision Mechanics, providing education and training Bucharest, Romania

Principal subjects/occupational Workshop on European Scientific and Industrial Collaboration on Promoting

skills covered Advanced Technologies in Manufacturing, WESIC’08

Title of qualification awarded Member of Organizing International Programme Committee


Dates (from - to) May 2008-July 2009

Name and type of organisation Excellence in Innovation, USAID and Norwegian Ministry of Foreign Affairs

providing education and training EDC, Boston, USA/Sarajevo BiH

Principal subjects/occupational Wood Technology Center;

skills covered

Title of qualification awarded Project leader


Dates (from - to) April 2007-May 2007

Name and type of organisation University of Applied Sciences Berne - Architecture,

providing education and training Wood and Civil Engineering, Biel, Switzerland.

Principal subjects/occupational Strengthening of research, development and training capacities;

skills covered Wood industry, Bosnia & Herzegovina- Centre of Excellence

Title of qualification awarded Certificate of course completion (Successfully completed course , Final report/exam)


Dates (from - to) July 2006.

Name and type of organisation Institute of Economic Engineering, Zenica, BiH

providing education and training USAID CCA (Cluster Competitiveness Activity), CARDNO

Principal subjects/occupational Business Plan and preparation of loan application

skills covered





Dates (from - to) June 2006.

Name and type of organisation USAID LAMP, Chemonics


Principal subjects/occupational Clean production in diary industry

skills covered

Title of qualification awarded Certificate of completion (Successfully completed course and exam)


Dates (from - to) May 2005

Name and type of organisation SEED, South east Europe Enterprise Development, Bosnia and Herzegovina

providing education and training Sarajevo, BiH

Principal subjects/occupational Technical standards and directives of European Union in wood processing industry

skills covered

Title of qualification awarded Certificate of completion (Successfully completed course and exam)


Dates (from - to) May 2004 Name and type of organisation Algor, Center for Mechanical Simulation technology, Pittsburgh, USA


Principal subjects/occupational Distance Learning Algor Software Web Course-Fluid Flow Analysis

skills covered

Title of qualification awarded Certificate of course completion (Final report/exam) – Key user


Dates (from - to) October 2005 – April 2006.

Name and type of organisation TIKA (Türk Ǐșbirliği ve Kalkinma İdaresi Bașkanliği), Turkey

providing education and training Zenica, Bosnia and Herzegovina

Principal subjects/occupational “BIRINCI KADEME – Türkce Kursunu bașariyla” – Turkish language course

skills covered



Dates (from - to) October 2002 – November 2003

Name and type of organisation Centro Ricerche e Studi Direzionali-CERISDI, Mondimpresa, Ministry of Foreign

providing education and training Affairs of Italy, Cooperacione Italiana, EIC Network, Region Sicilia, Politecnico di Torino,

Dipartimento di Sistemi di Produzione ed Economia della Azienda, Camera di Commercio Industria Artigianato e Agricoltura di Torino, Camera di Commercio Industria Artigianato e Agricoltura di Palermo, Italy

Principal subjects/occupational Project INTEGRA, “A MEDITERRANEAN AND BALKAN NETWORK FOR SMEs”,

skills covered Creation of SME's network in Mediterian Basin, Midlle and Near East Countries and Balcan Area



Dates (from - to) June 2002 – July 2002

Name and type of organisation Northern Advancement Center for Science & Technology, Sapporo, JICA, Japan


Principal subjects/occupational Production Management for Eastern European Countries

skills covered



Dates (from - to) October 2001. Name and type of organisation Sandvik Training Centre, Wien, Austria

providing education and training Principal subjects/occupational Machinability and machining of metal materials

skills covered






Dates (from - to) October 1999 – March 2000. Name and type of organisation Debus (Olomouc, Czeck Republic), ITS (Ljubljana, Slovenia), Alden Data (Sarajevo, B&H)

providing education and training Principal subjects/occupational Baan IV C, Enterprise Resource Planning Software, Training for Key User

skills covered



Dates (from - to) June 2015 –November 2015.

Name and type of organisation Adult Education Center Tešanj, GIZ Prolocal

providing education and training Tešanj, Bosnia and Herzegovina

Principal subjects/occupational CNC Programming

skills covered


Level in national classification Lecturer


Name and type of organisation University of applied science Bern, Switzerland, Format, Sarajevo, BiH


Principal subjects/occupational Advanced study:Development of Leadership and Skills in furniture productions and

skills covered woodprocessing -Modul A, Sarajevo, BiH

Title of qualification awarded Certificate of course completion ( Final report/exam)-10 ECTS


Dates (from - to) September

Name and type of organisation NALAS, GIZ ORF, Trogir, Croatia


Principal subjects/occupational Local leaders Trening of treners-Generic course

skills covered


Level in national classification Consultant

Dates (from - to) October 2015 Name and type of organisation University of applied science Bern, Switzerland, Format, Sarajevo, BiH



skills covered woodprocessing -Modul B, Sarajevo, BiH




Name and type of organisation NALAS, GIZ ORF, Skopje, FYRM


Principal subjects/occupational Local leaders Trening of trainers (LL SEE) specific training-Efficiency of communal Affairs

skills covered



Dates (from - to) December 2016. Name and type of organisation NALAS, GIZ ORF, Zagreb, Croatia

providing education and training Principal subjects/occupational LL SEE specific course - “Development of infrastructure investment projects”

skills covered





Dates (from - to) January 2015 Name and type of organisation University of applied science Bern, Switzerland, Format, Sarajevo, BiH



skills covered woodprocessing -Modul C, Sarajevo, BiH


Level in national classification 10 ECTS

Dates (from - to) February 2016. Name and type of organisation NALAS, GIZ ORF, Belgrad, Serbia

providing education and training Principal subjects/occupational LL SEE specific training- “Result-based strategic programme and management” Skills covered



Dates (from - to) February 2016. Name and type of organisation United Nations Industrial Development Organisation UNIDO, Ministry of Foreign Trade and Economic

providing education and training Relations, Council of Ministers of Bosnia and Herzegovina, Government of Slovenia, Liveo, Ljubljana Principal subjects/occupational Resource Effiient and Cleaner Production (RECP)

skills covered National Cleaner Production Programme in BiH, Module 1-6, 9 and 11

Demonstration programme for Bosnia and Herzegovina, Enova Sarajevo

Title of qualification awarded Certified consultant

Dates (from - to) March 2015 Name and type of organisation University of applied science Bern, Switzerland, Format, Sarajevo, BiH



skills covered woodprocessing -Modul D, Sarajevo, BiH


Level in national classification 10 ECTS

Dates (from - to) March 2016. Name and type of organisation NALAS, GIZ ORF, Sarajevo, Bosnia and Herzegovina

providing education and training Principal subjects/occupational Local leaders Trening of treners- LL SEE Regional Rehearsal Workshop Skills covered


Level in national classification Consultant –Trainer/Expert

Dates (from - to) March 2016. Name and type of organisation United Nations Industrial Development Organisation UNIDO, Ministry of Foreign Trade and Economic


skills covered National Cleaner Production Programme in BiH, Module 7,8,10 and 12-Exam


Title of qualification awarded Certified consultant

Dates (from - to) April 2016. Name and type of organisation NALAS, GIZ ORF, Association of towns and municipalities of FBiH, Mostar, Bosnia and Herzegovina

providing education and training Principal subjects/occupational Local leaders Trening of treners- Local Leaders for South East Europe skills covered National training in Bosnia and Herzegovina


Level in national classification Consultant –Trainer/Expert




Dates (from - to) May-June 2016. Name and type of organisation Berne University of Applied Science, Biel , Switzerland

providing education and training Principal subjects/occupational Advanced study:Development of Leadership and Skills in furniture productions and

skills covered woodprocessing -Modul E, Biel , Switzerland

Title of qualification awarded 10 ECTS

Dates (from - to) June 2016. Name and type of organisation Berne University of Applied Science, Biel , Switzerland

providing education and training Principal subjects/occupational LSDT Training – Training of trainers

skills covered

Title of qualification awarded 3 ECTS

Dates (from - to) February-July 2016. Name and type of organisation United Nations Industrial Development Organisation UNIDO, Ministry of Foreign Trade and Economic


skills covered National Cleaner Production Programme in BiH, Case study in Company Madi ltd Tešanj


Title of qualification awarded Certified RECP consultant

Dates (from - to) Name and type of organisation

providing education and training Principal subjects/occupational

skills covered




skills covered




skills covered




skills covered




skills covered




PERSONAL SKILLS

Mother tongue(s) Bosnian

Other language(s)

UNDERSTANDING SPEAKING WRITING

Listening Reading Spoken interaction Spoken production

English C2 C2 C2 C2 C2

Replace with name of language certificate. Enter level if known.

Turkish B1 B1 B1 B1 B1


Levels: A1/2: Basic user - B1/2: Independent user - C1/2 Proficient user Common European Framework of Reference for Languages

Other language(s) UNDERSTANDING SPEAKING WRITING

Listening Reading Spoken interaction Spoken production

Italian B2 B2 B2 B2 B2


Russian A2 A2 A2 A2 A2


Communication skills

Team work: I have worked in different types of projects in different developed countries supported from companies and government.

Good communicator ;

Ability to collaborate with cross functional staff teams, senior managers, board members, and community representatives;

Capable of developing and maintaining successful customer relationships;

Outstanding interpersonal communication and presentation ability and team work drive;

Able to contribute to business planning at a strategic level;

Excellent applied marketing research skills;

Excellent conflict resolution skills;

Consistently approaches work with energy and a positive, constructive attitude;

Demonstrates strong oral and written communication skills;

Builds strong relationships with clients and external actors;




ADDITIONAL INFORMATION

Organisational / managerial skills

Ability to lead business processes re-engineering, implementation of new systems (business side), and affect staff behavioral/ attitudinal change.

Member of following professional bodies: Inst tute for Standardization, Metrology and Intellectual Property, Bosnia and Herzegovina, member of TC/35 Road Vehicles, WG 35/2 Standardization

Member of Organizing International Programme Committee, International Conferences: MECAHITECH '09 and WESIC'08 in Bucharest, Romania and Techno-Educa 2007, 2008 and 2009 in Zenica, Bosnia and Herzegovina

Results-oriented Ph.D. level professional team player dedicated to achieving organizational goals

Goal-driven performer focused on continuous improvement and learning

Versatile, willing and keen to learn, acquires new skills quickly

Results driven “Can Do Attitude” with the focus on total task accomplishment.

Open to relocation and field work.

Job-related skills Competent with 3D-CAD and CAM applications;

Competent with CNC programming and operate with CNC machine;

Competent with QMS requirements (ISO 9001, ISO 14001, ISO/TS 16949; VDA 6.1, EAQF, AVSQ, QS 9000, FSC, CoC, HACCP, etc.);

Competent with wood products testing procedure;

Ability to lead strategic planning, results-based management and reporting;

Demonstrated ability to conduct competitive analysis and discern factors at the root cause of changes in a business environment by utilizing knowledge of social, economic, legal, and political factors that influence customer behavior and demand fluctuations;

Ability to identify and analyze trends, opportunities and threats;

Strong work ethic and effective organizational skills to plan and organize;

Committed to revenue growth and providing superior customer service;

Focused on impact and result for the client and responds positively to critical feedback;

Excellent drafting and presentation skills ;

Ability to plan and organize work ;

Strong negotiating skills;

Ability to work with minimum supervision

Computer skills

computer-literate performer with demonstrated extensive technical proficiency in a wide range of software applications and programs including: the entire MS Office Suite (including VISIO, Project)- Microsoft Office™ tools;

▪ good command of Corel, Baan (ERP-DEM software application) AutoCad, Mechanical Desktop, Inventor, , SolidWorks (3D-CAD) Algor (FEM software), SolidCAM (CAM application), CNC programming.

Other skills Music, Reading and visiting art galleries and museum all round he world. Enjoy all sports particularly football, basketball and skiing. Love to travel and experience different countries, nations and culture.

Regional Economic development, Business infrastructure Development, SME sector Development, SME infrastructure development, SME Business Incubation, Technology Park, etc.

Driving licence ▪ Category B



Publications

Presentations

Projects

Conferences

Seminars

Honours and awards

Memberships

References

List of books/publications:

1. Alagić I., J.Mujkanović: Manual of CNC programming, GIZ, Federal Ministry of Development, Enterpreneurship and Craft, TRA Tešanj Development Agency, Tešanj, 2015.

2. Alagić I.: Export Book-Customer Specific Requirements, EU, TRA Tešanj Development Agency, Tešanj, 2015.

List of research and feasibility studies are as follows:

1.D.Petković, I.Alagić etc.:" Feasibility study of establishment of Science-Technology Park in Zenica“, team member, University of Sarajevo, Faculty of Mechanical Engineering in Zenica, 2003, Zenica, Bosnia and Herzegovina. 2. I Alagić, A.Abramušić:"Analysis of the existing production technologies level in wood processing industry and specification of needs“, author, REZ Regional Development Agency Central BiH region, 2005, Zenica, Bosnia and Herzegovina (More info: www.rez.ba ) 3.I. Alagić, A.Abramušić:"Analysis of the available working force in wood processing industry compared with the industry needs“ author, REZ Regional Development Agency Central BiH region, 2005, Zenica, Bosnia and Herzegovina (More info: www.rez.ba ) 4. I. Alagić and others:"Feasibility study of waste wood commercial utilization in Central Bosnia and Herzegovina as a resource recovery and economic development project in the region", chief of project team and author, REZ Regional Development Agency Central BiH region, 2006. (More info: www.rez.ba ) 5. I.Alagic: :"Feasibility study of waste wood commercial utilization in Northern Montenegro as a resource recovery and economic development project in the region", Monitor, CHF Montenegro, FORS Montenegro, 2007. 6. Alagić I., Korjenić I., IDENTIFICATION OF HIGH IMPACT ICTS AS E-BIZ CENTER CORE OFFERINGS: WOOD

SECTOR, BRIEFING PAPER, EXCELLENCE IN INNOVATION PROJECT, USAID/BIH EXCELLENCE IN INNOVATION

DOT-ORG COOPERATIVE AGREEMENT AWARD NO. 168-A-00-07-00101-00 AND ROYAL MINISTRY OF FOREIGN

AFFAIRS, NORWAY GRANT Project number 2070065, June 6, 2008. 7. I.Alagic:“ „Final report on the results of Evaluation of market and production potential in the wood processing sector in BiH and Evaluation of BiH companies for participationin SIPPO match making activities 2009-2011“, Swiss Import Promotion Programe, SIPPO, July 2008. 8.I.Alagic:“ „Final report on the results of GAP Analysis of the wood processing sector in Bosnia and Herzegovina“, Swiss Import Promotion Programe, SIPPO, December 2008. 9.I.Alagić: “Analysis of craft and entrepreneurship in Žepče Municipality”, RAŽ Local Development Agency, Federal Ministry of Development, Entrepreneurship and Craft, Bosnia and Herzegovina 2013. 10.I.Alagić: “Analysis of women role in rural areas of FBiH – Case study of Tešanj Municipality and Action Plan of intervention for period 2014-2016”, Association of VESTA, UN WOMEN, ADA Austrian Development Agency, 2013. 11. I.Alagić, M.Džihić, Z.Miovčić: “Competitiveness Analysis of metalworking and automotive sector in Tešanj Municipality”, GIZ Prolocal, November 2014. 12. . I.Alagić, Z.Miovčić, A.Kokić: ““Competitiveness Analysis of food processing and beveraages sector in Tešanj Municipality”, GIZ Prolocal, November 2014. 13. M.Stanković, I.Alagić and others:”Manual- Technique and methods for support to private business sector and investors in stage of start ups, growth and development od business”, DCG Consulting Beograd, USAID Sustainable Economic Development Project in Serbia, December 2014. 14. I.Alagić: Strategic planning and FOPIP of utility company JP RADTešanj, Case study, project Local leaders Trening of trainers (LL SEE), NALAS, GIZ ORF, Association of towns and municipalities of FBiH,Belgrad, February 2016. 15. I.Alagić: “ Competitive Market-Based design, technology and testing Center in Wood industry as the Wood Academia core offerings: Training programme for middle and top management “ Final exam and Diploma thesis, Certificate of Advanced Studies CAS in Leadership and Skills Development Furniture and Wood Processing Industry, Bern University of Applied Sciences, Center for Development and Cooperation, Solothurnstrasse 102, CH 2504 Biel, Switzerland, July 2016. 16. I.Alagić, M.Petrović:” Assessment Report and the possibilities for improving resource efficiency and cleaner production in company MADI ltd. Tešanj”, United Nations Industrial Development Organisation UNIDO, Ministry of Foreign Trade and Economic Relations, Council of Ministers of Bosnia and Herzegovina, Government of Slovenia, Liveo, Ljubljana, Resource Effiient and Cleaner Production (RECP), National Cleaner Production Programme in BiH, Case study in Company Madi ltd Tešanj, Demonstration programme for Bosnia and Herzegovina, Enova Sarajevo, Tešanj/Sarajevo, July 2016.

http://www.rez.ba/

http://www.rez.ba/

http://www.rez.ba/




Consultancy:

1.Garant Möbel Akademie, Innotech Holztechnologien GmbH, Berlin, Germany, 2006-2007. 2.Wood Technology Center, Exellence in Innovation, Education Development Center, Boston, USA, 2008. 3.Cluster Competitiveness Activity, USAID, B&H, 2005-2008. 4.SIPPO Programe for Wood Industry, Swiss Import Promotion Programe SIPPO, Osec, Zurich, Switzerland, 2008. 5.FORS Montenegro, CHF Montenegro, Waste wood commercial utilization in Northern Montenegro as a resource recovery and economic development project in the region, Montenegro, 2007. 6.RAŽ Local Development Agency, Federal Ministry of Development, Entrepreneurship and Craft, Žepče/Mostar, Bosnia and Herzegoviona, 2012. 7.Association Vesta Tuzla, Bosnia and Herzegovina, June-september 2013. 8.EDA Agency, Banja Luka, Bosnia and Herzegovina, October-december 2013. 9. DCG Consulting, Beograd, Serbia, November-December 2014. 10. Trainer and Consultant within project Local leaders Trening of trainers (LL SEE), NALAS, GIZ ORF, Association of towns and municipalities of FBiH, September 2015-April 2016. 11. Consultant, United Nations Industrial Development Organisation UNIDO, Ministry of Foreign Trade and Economic Relations, Council of Ministers of Bosnia and Herzegovina, Government of Slovenia, Liveo, Ljubljana, Resource Effiient and Cleaner Production (RECP), National Cleaner Production Programme in BiH, Case study in Company Madi ltd Tešanj, Demonstration programme for Bosnia and Herzegovina, Enova Sarajevo, Tešanj/Sarajevo, February 2016-July 2016. 12. Trainer within Certificate of Advanced Studies CAS in Leadership and Skills Development Furniture and Wood Processing Industry, Bern University of Applied Sciences, Center for Development and Cooperation, Solothurnstrasse 102, CH 2504 Biel, Switzerland, July 2016. MEMBERSHIP:

1. EU Support to Institutional Capacity Building for Regional and Local Economic and SME Development, Bosnia and Herzegovina, Membership of the Project Steering Committee, 2009- Onwards

2. IPA Cross Border Programme Serbia-Bosnia and Herzegovina, Membership of the Joint Monitoring Committee, 2010- Onwards

3. IPA Cross Border Programme Croatia -Bosnia and Herzegovina, Membership of the Joint Monitoring Committee, 2010- Onwards

4. Association of Municipalities and Cities of the Federation of Bosnia and Herzegovina, The Commission for International Relations, Cooperation and European Integration, Membership of the Commission for International Relations, Cooperation and European Integration, 2009- 2013

5. Association of Municipalities and Cities of the Federation of Bosnia and Herzegovina, The Commission for International Relations, Cooperation and European Integration, President of the Commission for International Relations, Cooperation and European Integration, 2013-onward

Membership of Mr.Alagić Ph.D.- International Programme Committee, International Conference:

1. MECAHITECH '12, 4th 3rd International Conference on Innovations, Recent Trends and Challenges in Mechatronics, Mechanical Engineering and New High-Tech Products Development, Bucharest, Romania, September/October 2012. 2. MECAHITECH '11, 3rd International Conference on Innovations, Recent Trends and Challenges in Mechatronics, Mechanical Engineering and New High-Tech Products Development, Bucharest, Romania 22 - 23 September 2011. 3. MECAHITECH '10, 2nd International Conference on Innovations, Recent Trends and Challenges in Mechatronics, Mechanical Engineering and New High-Tech Products Development, Bucharest, Romania, 23-24 September 2010. 4. WESIC'08 International Conference, 6th Workshop on European Scientific and Industrial Collaboration on promoting Advanced Technologies in Manufacturing WESIC'08, Bucharest, Romania, 25-26 September 2008. 5. MECAHITECH '09, 1st International Conference on Innovations, Recent Trends and Challenges in Mechatronics, Mechanical Engineering and New High-Tech Products Development, Bucharest, Romania, 8-9 October 2009.



List of scientific-research work are as follows:

1.Ekinović S., Alagić I., Hodžić N., Kovačević M.: “Experimental Modelling of Gear Pump (120 47 000 type) Flow“, 2nd International Symposium, Revitalization and Modernization of Production, RIM'99, Proceedings, University of Bihać , Faculty of Technical Engineering in Bihać, Bosnia and Herzegovina, 1999. 2. Alagić I.: “Quality Control Tools in Application-through example of external mechanical grinding of sleeve diameter driving gear of high pressure 6 50 351 128 to diameter Ø18e6 “, 1st Research-Expert Conference “QUALITY '99”, Proceedings, University of Sarajevo, Faculty of Mechanical Engineering in Zenica, B&H, 1999. 3. MECAHITECH '10, 2nd International Conference on Innovations, Recent Trends and Challenges in Mechatronics, Mechanical Engineering and New High-Tech Products Development, Bucharest, Romania, 23-24 September 2010. 4. Alagić I.:“The Basic Audit Characteristics in Suppliers System of Volkswagen AG Concern“, 5th International Conference System Quality Management, SQM 2001, Proceedings, Center for Quality, Faculty of Mechanical Engineering in Podgorica, Budva, Serbia & Montenegro, 2001. 5. Alagić I.: “Teoretical and Experimental Determination Volumetric Losses of Gear Pumps″, 3th International Symposium, Revitalization and Modernization of Production, RIM'2001, Proceedings, University of Bihać , Faculty of Technical Engineering in Bihać, Bosnia and Herzegovina, 2001. 6. Alagić I.: “Some approachs to theoretical-experimental determination flow capacity of gear pump”, 3th International Symposium, Revitalization and Modernization of Production, RIM'2001, Proceedings, University of Bihać , Faculty of Technical Engineering in Bihać, Bosnia and Herzegovina, 2001. 7. Alagić I.: “Program of Development and Application of Management Information System (MIS) Concepts (software BAAN IV) in company Pobjeda-Tesanj“, 3th International Symposium, Revitalization and Modernization of Production, RIM'2001, Proceedings, University of Bihać, Faculty of Technical Engineering in Bihać, Bosnia and Herzegovina, 2001. 8. Alagić I.: “ Integrated Information System as support to the Development and Implementation of TQM System“, 2nd International Research-Expert Conference “QUALITY '2001”, Proceedings, University of Sarajevo, Faculty of Mechanical Engineering in Zenica, Bosnia and Herzegovina, 2001. 9. Alagić I.: “Total Quality Management and standards ISO 9000:2000- A step into future“, 2nd International Research-Expert Conference “QUALITY '2001”, Proceedings, University of Sarajevo, Faculty of Mechanical Engineering in Zenica, Bosnia and Herzegovina, 2001. 10. Alagić I.: “Audit in the Supply Chain of Volkswagen AG“, 5th International Conference Dependability and Quality Management, DQM 2002, Proceedings, Research Center of Dependability and Quality Management, Proceedings, Belgrade, Serbia & Montenegro, 2002. 11. Alagić I.: “Business improvement through self assessment – The European model for business excellence“, 1st International Conference on Advanced Technologies for Developing Countries, ATDC 2002, Proceedings, University of Juraj Strossmayer in Osijek, Croatia, 2002. 12. Alagić I.: “Self assessment of Quality Management System (QMS) in automotive industry“, 1st International Conference on Advanced Technologies for Developing Countries, ATDC 2002, Proceedings, University of Juraj Strossmayer in Osijek, Croatia, 2002. 13. Alagić I.: “Mathematical-experimental modelling of flow capacity of gear pump (61319221 type) “, 6th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2002, Proceedings, Neum , B&H, 2002. 14. Alagić I.: “New quality system standard ISO/TS 16949 for automotive supplier – QS 9000 Killer is coming “, 6th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2002, Proceedings, Neum , B&H, 2002. 15. Alagić I.: “Basic characteristics and application of Baan Information system in automotive industry “, 6th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2002, Proceedings, Neum , B&H, 2002. 16. Alagić I.: “ MANAGEMENT OF SMALL AND MEDIUM ENTERPRISES (SMEs) IN JAPAN “, 7th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2003, Proceedings, Lloret de Mar, Barcelona , Spain, 2003. 17. Alagić I.: “ EXPERIENCE, ROLE AND IMPORTANCE OF SCIENCE AND TECHNOLOGY PARKS IN JAPANESE ECONOMY“, 4th International Symposium, Revitalization and Modernization of Production, RIM'2003, Proceedings, University of Bihać, Faculty of Technical Engineering in Bihać, Bosnia and Herzegovina, 2003. 18. Alagić I.: “ APPLICATION OF FMEA METHOD IN MACHINING PROCESS OF BRAKING DISK 1J0 615 601 “, 3th International Research-Expert Conference “QUALITY '2003”, Proceedings, University of Sarajevo, Faculty of Mechanical Engineering in Zenica, Bosnia and Herzegovina, 2003. 19. Alagić I.: “ QUALITY ASSURANCE OF MACHINING PROCESS OF BRAKING DISK 1J0 615 601 BY USING SPC QUALITY TECHNIQUES “, 3th International Research-Expert Conference “QUALITY '2003”, Proceedings, University of Sarajevo, Faculty of Mechanical Engineering in Zenica, Bosnia and Herzegovina, 2003. 20. Alagić I.: “DETERMINATION OF MACHINING CONDITION FOR OBTAINING REQUESTED THE SURFACE ROUGHNESS OF THE BRAKING SURFACE OF BRAKE DISC 1 J0 615 601-APPLICATION OF TAGUCHI METHOD“, 7th International Conference Dependability and Quality Management, DQM 2004, Proceedings, Research Center of Dependability and Quality Management, Belgrade, Serbia & Montenegro, 2004. 21. Alagić I.: “NEW TECHNOLOGY FOR CORROSION PROTECTION OF AUTOMOBILE PARTS - VISIBLE QUALITY“, 3rd INTERNATIONAL CONFERENCE «UPS 2004», Proceedings, Faculty of Mechanical Engineering and Computing, University of Mostar & Austrian Society of Engineers and Architects-OIAV & DAAAM International Vienna & Scientific and Technical Forum Mostar, B&H, 2004.




22. Alagić I.: “FINITE ELEMENT MODELLING OF WHEEL HUB AS A PART OF BRAKE SYSTEM” 8th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2004, Proceedings, Neum , B&H, 2004. 23. Alagić I.: “DESIGN AND TESTING OF BALL JOINT PART No. 1 81 16 001 0 USING FEA” 8th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2004, Proceedings, Neum , B&H, 2004. 24. Alagić I.: “FE-simulation research of static stiffness of braking disc No. 1J0 615 601 under the influence of the chucking process”, Međunarodni skup Informatika u proizvodnom i poslovnom okruženju IPOM, Zbornik radova, Viša tehnička škola, Doboj, Bosna i Hercegovina, 2004. 25. Alagić I.:”FE-simulation research of tensile proces test of the tie rod”, Međunarodni skup Informatika u proizvodnom i poslovnom okruženju IPOM, Zbornik radova, Viša tehnička škola, Doboj, Bosna i Hercegovina, 2004. 26. Alagic I. :“USING THE FINITE ELEMENT METHOD (FEM) IN ORDER TO OPTIMIZE OF CLAMPING FORCE FOR JAW-CHUCKS DURING MACHINING PROCESS OF THE BRAKE DISC”, 9th International Research/Expert Conference”Trends in the Development of Machinery and Associated Technology”, TMT 2005, Antalya, Turkey, 26-30. September, 2005. 27. Alagic I. : “APPLICATION OF TAGUCHI METHOD - DETERMINATION OF FLOW CAPACITY OF GEAR OIL PUMP FOR OPTIMIZATION OF INPUT WORKING CHARACTERISTICS”, 9th International Research/Expert Conference”Trends in the Development of Machinery and Associated Technology”,TMT 2005, Antalya, Turkey, 26-30. September, 2005. 28. Alagic I. :“THE ASSESSMENT OF QUALITY MANAGEMENT SYSTEM OF BASED ON VOLKSWAGEN’S SPECIFIC REQUIREMENTS“, 5th International Symposium, Revitalization and Modernization of Production, RIM'2005, University of Bihać, Faculty of Technical Engineering in Bihać, Bosnia and Herzegovina, 2005. 29. Alagic I. :““ITALIAN EXPERIENCE ABOUT SCIENCE TECHNOLOGY PARKS ”, 4. Research/Expert Conference with International Participation “Quality 2005”, Spa Fojnica, B&H, 09-12 November 2005. 30. Alagic I. :“ CONTRIBUTION TO TESTING OF MODEL OF METROLOGY SYSTEM IN WORKING CONDITIONS OF BUSINESS SYSTEMS FROM AUTOMOTIVE SUPPLY CHAIN”, 4. Research/Expert Conference with International Participation “Quality 2005”, Spa Fojnica, B&H, 09-12 November 2005. 31. M.Omanović, S.Oprašić, I.Pašalić, K.Mijanović, I.Alagić, E.Kinčić: “STRATEGIJA 7E NA PRIMJERU SLIVA RIJEKE BOSNE” 4th

Research/Expert Conference withInternational Participation"QUALITY 2005", Univerzitet u Zenici,University Erlangen Nuremberg,Asocijacija za kvalitet u BiH, Spa Fojnica, Bosnia and Herzegovina 09-12 November 2005. 32. Alagic I. "NEW TRENDS IN DEVELOPMENT OF SURFACE TECHNOLOGY REQUIRED BY AUTOMOTIVE INDUSTRY", VI Naučno/stručni simpozij sa međunarodnim učešćem ”METALNI I NEMETALNI ANORGANSKI MATERIJALI” Zenica, BiH, 27-28. april 2006. 33. Alagic I. “USING OF THE VOLATILE CORROSION INHIBITORS (VCI) TECHNOLOGY IN AUTOMOTIVE INDUSTRY", VI Naučno/stručni simpozij sa međunarodnim učešćem ”METALNI I NEMETALNI ANORGANSKI MATERIJALI” Zenica, BiH, 27-28. april 2006. 34. Alagić I., Ajkunić H.:"A place for knowledge based local sustainable development-7E concept", 2nd European Regional Economic Forum (EREF-2006), Proceedings, Nova Gorica, Slovenia, May-June 2006. 35. Alagic I. “TENSILE PROCESS TEST OF TIE ROD USING FEM SIMULATION”, 10th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology, TMT 2006, University of Zenica, Faculty of Mechanical Engineering Engineering in Zenica, UPC Universitat Politecnica de Catalunya, Barcelona, Spain, BAHÇEŞEHIR ÜNIVERSITESI Istanbul ,Turkey, Barcelona-Lloret de Mar, Spain, 11-15. September 2006. 36. Alagic I. “AUTOMOTIVE INDUSTRY SPECIFIC REQUIREMENTS RELATED CORROSION PROTECTION OF PARTS", 10th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology, TMT 2006, University of Zenica, Faculty of Mechanical Engineering Engineering in Zenica, UPC Universitat Politecnica de Catalunya, Barcelona, Spain, BAHÇEŞEHIR ÜNIVERSITESI Istanbul ,Turkey, Barcelona-Lloret de Mar, Spain, 11-15. September 2006. 37. Alagić I. :"Design of experiment application in analysis of gear oil pump flow capacity", 2. međunarodni skup Informatika u poslovnom menadžmentu i komunikacijama IPOM 2006, Saobraćajni fakultet i Viša tehnička škola u Doboju, hotel Kardijal, Teslić, Bosna i Hercegovina, 15-16. septembar 2006. 38. Alagić I. :"What is Toyota production system?", 2. međunarodni skup Informatika u poslovnom menadžmentu i komunikacijama IPOM 2006, Saobraćajni fakultet i Viša tehnička škola u Doboju, hotel Kardijal, Teslić, Bosna i Hercegovina, 15-16. septembar 2006. 39. D.Petkovic, I.Alagic, S.Isakovic: "Stanje ljudskih resursa i drugih bitnih elemenata kao osnovni preduslov za početak rada i razvoj savremene livnice za automobilsku industriju u Zenici",CIMOS Dan Raziskav, 2. zbornik referatov,Koper, Slovenija, 17. november 2006. 40. D Petkovic, S.Balic, A.Beros, H.Avdusinovic, I.Alagic : "Formiranje prototipne laboratorije za ljevarstvo u satavu Tehnološkog parka Univerzitet u Zenici", CIMOS Dan Raziskav, 2. zbornik referatov, Koper, Slovenija, 17. november 2006. 41. Alagić I.:" Analysis of the available working force and training in wood processing industry in FBiH", 5. Research/Expert Conference with International Participation, “Quality2007”, Univerzitet u Zenici, University Erlangen Nuremberg,Asocijacija za kvalitet u BiH, Neum, B&H, 06-09 June 2007. 42. Alagić I.:" Analysis of the existing production technologies level in wood processing industry in FBiH and specification of needs“", 5. Research/Expert Conference with International Participation, “Quality2007”, Univerzitet u Zenici,University Erlangen Nuremberg,Asocijacija za kvalitet u BiH, Neum, B&H, 06-09 June 2007. 43. Alagić I.:"Analysis of current level of QMS introduction in the wood processing industry in FBiH and specification of future needs“, 5. Research/Expert Conference with International Participation, “Quality2007”, Univerzitet u Zenici, University Erlangen Nuremberg,Asocijacija za kvalitet u BiH, Neum, B&H, 06-09 June 2007. 44. Ganne-Chédeville C., Alagić I., Gfeller B., Properzi M.: "Wood welding: A challenge alternative for wood processing industry in BiH", Studentska naučno-stručna konferencija u okviru sajma ZEPS Intermetal, Techno-Educa 2007, Zbornik radova, Univerzitet u Zenici, , Zenica, Bosna i Hercegovina, 17. maj 2007. 45. Mujić A., Alagić I., Petković D.: "Menadžment ljudskih resursa (HRM) i potencijalne perspektive razvoja livničke proizvodnje u BiH za potrebe automobilske industrije", Studentska naučno-stručna konferencija u okviru sajma ZEPS Intermetal, Techno-Educa 2007, Zbornik radova, Univerzitet u Zenici, Zenica, Bosna i Hercegovina, 17. maj 2007. 46. Alagić I.: " Strengthening of research, development and training capacities (Technology Park & Wood Excellence Centre), in Central Bosnia and Herzegovina Region-THE IMPLEMENTATION IN BOSNIA AND HERZEGOVINA OF THE FIRST STAGES OF A REGIONAL



POLICY PROCESS IN THE PRE-ACCESSION PHASE LEADING UP TO THE ENLARGEMENT PROCESS OF EU", 3rd European Regional Economic Forum (EREF-2007), Building Knowledge Society through Public RTD Funding, Round Table: Development priorities, preparations for IPA and public funding of RTD in Candidate and Potential Candidate Countries, Proceedings, Nova Gorica, Slovenia, , 31.May-02.June 2007. 47. Alagić I.: " DOES B&H NEED WOOD EXCELLENCE CENTER?" 6. Međunarodna naučna konferencija o proizvodnom inžinjerstvu, RIM 2007, University of Bihać, Faculty of Technical Engineering in Bihać, Society for robotics of Bosnia and Herzegovina, International Biographical Centre Cambridge, England, Plitvička jezera , Croatia, 24-26. oktobar 2007. 48. Alagić I.:"Is there potential for waste wood commercial utilization in Central Bosnia and Herzegovina? ", 11th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, University of Zenica, Faculty of Mechanical Engineering Engineering in Zenica, UPC Universitat Politecnica de Catalunya, Barcelona, Spain, BAHÇEŞEHIR ÜNIVERSITESI Istanbul ,Turkey, TMT 2007, Hammamet, Tunisia, 05-09. September 2007. 49. Alagić I., D. Petković, T. Stautmeister, K.Wüthrich: "Some word about Wood Excellence Center as top-priority project of Central BiH", 11th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, University of Zenica, Faculty of Mechanical Engineering Engineering in Zenica, UPC Universitat Politecnica de Catalunya, Barcelona, Spain, BAHÇEŞEHIR ÜNIVERSITESI Istanbul ,Turkey, TMT 2007, Hammamet, Tunisia, 05-09. September 2007. 50. Alagić I.: Razvoj modela za samoocjenjivanje sistema kvaliteta u upravljanju lancem dobavljača automobilske industrije”, CIMOS Dan Raziskav 2007, 3. zbornik referatov, Koper, Slovenija, 16. november 2007. 51. Alagić I.:"How economy and regional development agencies could contribute to the reconciliation B&H-Expierence of REZ-RDA Central B&H", The 1st International Conference on Intercultural Relations: The Challenges of Religious Pluralism, Faculty of Applied Social Studies, Nova Gorica, Slovenia, 6-7. December 2007. 52. Alagić I.: "EUROPEAN TECHNICAL REGULATION RELATED TO WOOD PROCESSING INDUSTRY", 7th SCIENTIFIC/RESEARCH SYMPOSIUM WITH INTERNATIONAL PARTICIPATION"METALIC AND NONMETALLIC MATERIALS-MNM 2008" , Zenica, B&H, 15.-16. May 2008. 53. Alagić I.: "THE MANDATORY QUALITY REQUIREMENTS FOR OEM’s SUPPLIERS IN AUTOMOTIVE INDUSTRY", 7th

SCIENTIFIC/RESEARCH SYMPOSIUM WITH INTERNATIONAL PARTICIPATION"METALIC AND NONMETALLIC MATERIALS-MNM 2008",Zenica, B&H, 15.-16. May 2008. 54. Alagić I.: “WHY TEST INSTITUTES & CENTRES FOR WOOD PRODUCTS ARE IMPORTANT ISSUE FOR WOOD PROCESSING SECTOR IN B&H”, 12th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, TMT 2008, Istanbul , Turkey, 26-29. August 2008. 55. Plančić A., Alagić I.,,Petković D, Rizvić E.: “OPTIMIZATION OF CNC MACHINING OF WODDEN DRUMS IN STANEX Ltd. ZENICA”, Studentska konferencija ”TECHNO-EDUCA 2008”, 22. i 23. maj 2008. godine u Zenici,u sklopu međunarodnog sajma ZEPS-Intermetal 2008., Zenica, B&H, 2008. 56. Garić E., Lihić A., Alagić I., Petković D., Yazgan H.: “APPLICATION OF ADVANCED CIM & JIT CONCEPT IN FURNITURE INDUSSTRY”, Studentska konferencija ”TECHNO-EDUCA 2008”, 22. i 23. maj 2008. godine u Zenici,u sklopu međunarodnog sajma ZEPS-Intermetal 2008. , Zenica, B&H,2008. 57. Alagić I, Petković D..: “THE EXISTING LEVEL OF PRODUCTION TECHNOLOGIES IN USE ON THE WOOD PROCESSING INDUSTRY IN FBiH BASED ON RESULTS OF CLUSTER COMPETITIVENESS ACTIVITY”, VI Naučno-stručna konferencija održavanja "KOD-2008", ”Inžinjerstvo u funkciji uspješnosti procesa održavanja” sa međunarodnim učešćem, KOD-2008, Hotel PALMA-Tivat, Crna Gora (Montenegro), 10-13. Juni 2008. 58. Alagić I.: „DESIGN OF EXPERIMENT AND TAGUCHI METHOD APPLICATION IN ANALYSIS OF GEAR OIL PUMP FLOW CAPACITY“, International Conference 6th Workshop on European Scientific and Industrial Collaboration on promoting Advanced Technologies in Manufacturing WESIC’08, Bucharest, Romania, 25-26 September 2008 59. Alagić I., Klarić S .:“DEVELOPMENT OF MODEL FOR ASSESSMENT OF QUALITY SYSTEM IN SUPPLY CHAIN MANAGEMENT OF AUTOMOTIVE INDUSTRY” , 6. Research/Expert Conference with International Participation “Quality 2009”, Neum, B&H, 04-07 June 2009. 60. Alagić I., Klarić S.: “ISO/TS 16949:2002 AND ISO 9001:2000 – SIMILIRATIES AND DIFFERENCES”, 6. Research/Expert Conference with International Participation “Quality 2009”, Neum, B&H, 04-07 June 2009. 61. Alagić I.: “THE EXISTING AND REQUIRED WORKFORCE AND TRAINING IN THE WOODPROCESSING INDUSTRY FBiH AS PRECONDITIONS FOR COMPETITIVENESS OF WOOD PROCESSING INDUSTRY IN B&H ”, 7th International ScientificConference on Production Engineering „RIM 2009“, Cairo , Egypt, September 26th- October 3rd 2009. 62. Alagić I.: „Evaluation of Market and Production Potential in the Wood Processing Sector in Bosnia and Herzegovina“, 13th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, University of Zenica, Faculty of Mechanical Engineering Engineering in Zenica, UPC Universitat Politecnica de Catalunya, Barcelona, Spain, BAHÇEŞEHIR ÜNIVERSITESI Istanbul, Turkey, TMT 2009, Hammamet, Tunisia, 16-21. October 2009. 63. Alagić I.:” “THE GAP ANALYSIS OF THE WOOD PROCESSING SECTOR IN BOSNIA AND HERZEGOVINA”, VIII Naučno/stručni simpozij sa međunarodnim učešćem ”METALNI I NEMETALNI MATERIJALI”, Zenica, BiH, 27-28.april 2010. 64. Alagić I.:” “MARKET SURVEY AND IDENTIFICATION OF HIGH IMPACT ICTs IN BH WOOD PROCESSING INDUSTRY” ,14th

International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology"TMT 2010, Mediterranean Cruise, 11-18 September 2010. 65. Alagić I.:” WOOD TECHNOLOGY CENTRE AS PRE-CONDITION FOR EXCELLENCE AND INNOVATION OF THE WOOD PROCESSING SECTOR IN B&H” ICEIRD2010: International Conference for Entrepreneurship, Innovation and Regional Development, Novi Sad, Serbia, 27-29. May 2010. 66. Alagić I.:” TEŠANJ BUSINESS EXCELLENCE INFRASTRUCTURE (TEBEXII) STRATEGY AS ENABLING INVESTMENT ENVIRONMENT”, ICEIRD2010: International Conference for Entrepreneurship, Innovation and Regional Development,Novi Sad, Serbia, 27-29. May 2010.




67. Alagić I, Šišić F: “TEŠANJ BUSINESS EXCELLENCE (TEBEX) STRATEGY AS ENABLING INVESTMENT ENVIRONMENT”, Proceedings of Business Development Conference 2010, Zenica, Bosnia and Herzegovina, 12th. November 2010. 68. Alagić I, Petković D.: ARTECO WOOD TECHNOLOGY CENTRE AS PRE-CONDITION FOR EXCELLENCE AND INNOVATION OF THE WOOD PROCESSING SECTOR IN B&H, Business Development Conference 2010, Proceedings of Business Development Conference 2010, Zenica, Bosnia and Herzegovina, 12th. November 2010. 69. Alagić I.: Savremeni pristup sistemu kvaliteta u upravljanju lancem dobavljača u automobilskoj industriji, ”, 7th Research/Expert Conference with International Participation “Quality 2009”, , Neum, B&H, 01st-04th June 2011 70. Alagić I.: How to achieve Excellence and Innovation and Quality in the Wood processing industry in BiH, 7th Research/Expert Conference with International Participation “Quality 2011”,Neum, B&H, 01st-04th June 2011. 71. Alagić I.: TEST AND RESEARCH CENTRES FOR WOOD PRODUCTS AS A CHALLENGE FOR B&H WOOD PROCESSING SECTOR, 15th International Research/Expert Conference”Trends in the Development of Machinery and Associated Technology” TMT 2011,., Prague, Czech Republic, 12-18 September 2011. 72. Alagić I.: MANDATORY REQUIREMENTS FOR WOOD PROCESSING IN THE FIELDS OF CERTIFICATION, LABELLING, MARKING AND STANDARDISATION, 15th International Research/Expert Conference”Trends in the Development of Machinery and Associated Technology” TMT 2011,Prague, Czech Republic, 12-18 September 2011. 73. Alagić I.: THE GAP ANALYSIS AS A TOOL TO IMPROVE THE COMPETITIVENESS OF WOOD PROCESSING SECTOR IN BOSNIA AND HERZEGOVINA, 15th International Research/Expert Conference”Trends in the Development of Machinery and Associated Technology” TMT 2011, Prague, Czech Republic, 12-18 September 2011. 74. Alagić I., Šišić F.: Models of excellence in local economic development of Tešanj municipality, Konferencija Razvoj poslovanja 2011, Ekonomska politika i poslovanje malih i srednjih preduzeća, Ekonomski fakultet, Univerzitet u Zenici, Zenica, BiH, 12. Novembar 2011. 75. Alagić I.:” CERTIFICATION MANUAL OF WOOD AND WOODEN PRODUCTS “, ,9thSCIENTIFIC/RESEARCH SYMPOSIUM WITH INTERNATIONAL PARTICIPATION, "METALLIC AND NONMETALLIC MATERIALS: production -properties-application", MNM 2012, ZENICA, B&H, 23rd and 24th APRIL 2012. 76. Alagić I.:” URBAN WASTEWATER PROJECT IN MUNICIPALITY OF TEŠANJ ” , 2nd International Symposium on Environmental and Material Flow Management, EMFM 2012, Zenica , B&H, 07-09. June 2012. 77. Alagić I.:” OPŠTE ODREDNICE LANCA DOBAVLJAČA - MODEL SISTEMA UPRAVLJANJA KVALITETOM U UPRAVLJANJU LANCEM DOBAVLJAČA AUTOMOBILSKE INDUSTRIJE”, The 2nd Conference „ODRŽAVANJE 2012“/ „MAINTENANCE, Zenica, B&H, June 13-16. 2012. 78. Alagić I., Kozak D., Šimunović K.:“ ANALYSIS OF GEAR OIL PUMP FLOW CAPACITY USING DESIGN OF EXPERIMENT”, SHMD 2012 Materials and Metallurgy, Sibenik, Republic of Croatia, 17.-21.06.2012. 79. Alagić I:” MAIN FINDINGS, OBSTACLES AND CHALLENGES FOR IMPROVEMENTS OF THE WATER/WASTEWATER SECTOR IN MUNICIPALITY OF TEŠANJ”, 16th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2012, Duabai , UAE, 10-12. September 2012. 80. Alagić I:” “ENERGY EFFICIENCY IN ADRIATIC REGION-CASE STUDY OF TEŠANJ MUNICIPALITY”,2nd International Scientific Conference on Engineering, mat 2012, Antalya,Turkey , November 22-24 2012. 81. Alagić I.:“OPTIMIZATION OF FORCE CLAMPING THE BRAKE DISK DURING MACHINING USING THE FINITE ELEMENT METHOD (FEM) SIMULATIONS”, MECAHITECH'12 - „The 4th International Conference on Innovations, Recent Trendsand Challenges in Mechatronics, Mechanical Engineeringand New High-Tech Products Development”, Bucharest, Romania, October 2012. 82. Piljug E., Alagić I.: “Disassembly and Assembly Technology of Tie Rod”, VI Studentska konferencija ”TECHNO-EDUCA 2012”, Tema: Preduzetničkim idejama ka ljepšoj budućnosti, ,Univerzitet u Zenici, Centar za preduzetništvo I inovacije CIP EIC, BSC Zeničko-dobojskog kantona, Zenica, B&H, 07 i 08. Novembar 2012. 83. Hajdić N.,Alagić I., Petković D.: “Primjena GT koncepta u proizvodnji automobilskih dijelova / Application of GT concept in car’s parts production”, VI Studentska konferencija ”TECHNO-EDUCA 2012”, Tema: Preduzetničkim idejama ka ljepšoj budućnosti, Univerzitet u Zenici, Centar za preduzetništvo I inovacije CIP EIC, BSC Zeničko-dobojskog kantona, Zenica, B&H, 07 i 08. Novembar 2012. 84. I.Alagić, S.Huskić, F.Šišić: „THE BEST PRACTICES OF BUSINESS EXCELLENCE ON TEŠANJ'S MUNICIPALITY CASE“, 8th Research/Expert Conference with International Participations ”QUALITY 2013“, Neum, B&H, June 06 – 08, 2013. 85. I.Alagić: “ASSESSMENT OF LOCAL ECONOMIC DEVELOPMENT CAPACITIES ACCORDING TO BUSINESS-FRIENDLY SCHEME IN CASE OF TEŠANJ’S MUNICIPALITY, 17th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2013, Istanbul, Turkey, 10-11 September 2013. 86. I.Alagić: “ Emisija općinskih obveznica-odgovornost na ispitu”, Edapedija, www.edapedija.net/e_ucenje, 08.12.2013., Banja Luka, BiH; 87.I.Alagić: “ Odgovornost lidera mijenja svijest mladih”, Edapedija, www.edapedija.net/e_ucenje, 02.01.2014.., Banja Luka, BiH; 88.I.Alagić: “ Elektronska uprava-odgovornost I otvorenost”, Edapedija, www.edapedija.net/e_ucenje, 30.01.2014., Banja Luka, BiH; 89.I.Alagić: “ Međuopćinski koncept saradnje na modelu poslovne izvrsnosti”, Edapedija, www.edapedija.net/e_ucenje, 20.02..2014., Banja Luka, BiH; 90.I.Alagić: “ Izgradnja javno privatnog dijaloga i promocija lokalne zajednice”, Edapedija, www.edapedija.net/e_ucenje, 26.03.2014., Banja Luka, BiH;

91.I.Alagić: THE GAP ANALYSIS AND PORTER’S DIAMOND AS A TOOL TO IMPROVE THE COMPETITIVENESS OF METALWORKING SECTOR IN BEAR REGION (BUSINESS EXCELLENCE AREA), BOSNIA AND HERZEGOVINA , 19th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, TMT 2015, Barcelona, Spain, 22-23 July 2015. 92.I.Alagić, D.Petković, R.Božičković: THE ADULT ECUCATION CENTER TEŠANJ AS PRECONDITIONS FOR COMPETITIVENESS OF LEADING INDUSTRIAL SECTORS IN BEAR REGION (BUSINESS EXCELLENCE AREA), BOSNIA AND HERZEGOVINA , 19th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, TMT 2015, Barcelona, Spain, 22-23 July 2015. 93.I.Alagić, S.Huskić: HOW TO IMPROVE BUSINESS CLIMATE IN BOSNIA AND HERZEGOVINA?: CASE STUDY FROM MUNICIPALITY OF TEŠANJ (accepted abstract) , 4th REDETE conference, Graz, Austria, October 22-24th, 2015. 94. I.Alagić, D.Petković: “ECONOMIC GROWTH OF SMALL REGIONS BASED ON OWN RESOURCES VS AVAILABILITY OF

http://www.edapedija.net/e_ucenje







SUPPORT FROM CAPITAL CITY-CASE STUDY OF TESAN MUNICIPALITY”, Akademija nauka i umjetnosti Bosne i Hercegovine i Odjeljenje društvenih nauka organiziraju međunarodnu naučnu konferenciju na temu Mjesto i uloga glavnih gradova u okviru Dunavske i Jadransko-jonske evropske makroregije, Sarajevo, BiH, October 2015. 95. I.Alagić, D.Petković, R.Božičković:MODEL OF PRODUCTION AND EXPORT VALUE CHAIN FOR THE SECTOR OF METALWORKING AND AUTOMOBILE PARTS IN TEŠANJ’S MUNICIPALITY, 20th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, TMT 2016, Mediterranean Cruise, 29th September 2016. 96. I.Alagić, D.Petković, V.Visekruna: HOW TO DEVELOP THE EXPORT VALUE CHAIN FOR THE SECTOR OF METALWORKING AND AUTOMOBILE PARTS IN TEŠANJ’S MUNICIPALITY? (accepted article), 27th DAAM International Symposium 2016., DAAM 2016, Mostar 26-29th Octobar 2016. Bosnia and Herzegovina, Tešanj, August 2016. Ismar ALAGIĆ, Ph.D.

ANNEXES

Documents

PERSONAL INFORMATION Ismar ALAGIĆ, Ph.D.EU R O P E A N C U R R I C U L U M V I TA E F O R M AT Curriculum Vitae