CV

Personal:

Name, Surname : Baki Koyuncu

Nationality : Turkish (TC no: 108 521 612 62)

Marital Status : Married

Address (home) : Hürriyet Street, No: 19 / 9, Sokullu,

Ankara, Turkey

Date of Birth : 23- 10- 1950

Address (work) : Electrical & Electronic Engineering, İstanbul Gelişim

University, İstanbul, Turkey

Tel (work/cell) : 90 0212 422 70 00 0542 268 33 60

e-mail : bkoyuncu@gelişim.edu.tr

Educatıon:

University : Electronics Eng ,Middle East Technical University,1968-69, Turkey

College : London Paddington College , 1969-70, UK

BSc : Electronics Eng, Birmingham University,1970-73, UK

MSc : Information and Systems Eng, Birmingham University, 1973-75,UK

PHD : Electronics/Computer Eng, Loughborough University,1977-81,UK

BSc Thesis :

Development of an 8 octave Electronic Piano(UK)

MSc Thesis: Data and noise management by using Phase Lock loop techniques in ATSF Digital satellite communications . (UK)

PhD Thesis: Computer visualization of surface vibration patterns on Piezoelectric transducers by using digital image processing and computer interfacing techniques (UK)

Postdoctorate: Development of Computer methods to analyse the liquid surface parameters by using photon correlation techniques (UK) Honours:

New York Academy of Science (USA)

Who’s Who (14th

chapter ) (USA)

Prizes :

- Tubitak Science Encouragement prize (European Enviromental Pollution Project),2004

- Tübitak Science Encouragement prize (European Robotics Project), 2005

- Ankara University Engineering Faculty Science prize , 2005

- Ankara University Engineering Faculty Science prize , 2006

Scholarships :

- GCE College Education (Turkish government) - BSc Education (Turkish government) - MSc Education (Turkish government) - PHD Education ( UK government) - Visiting Research Grants (USA ,UK) Memberships :

- MIEEE : Senior Member, IEEE (USA) - MIEE : Member, IEE (UK)

mailto:bkoyuncu@gelişim.edu.tr

- CENG : Professional Engineer (UK)

- CPHYS : Professional Physicist (UK) - MInsP : Member, Physics Institution (UK) - MAeng : Member, Engineering Board (Australia) Editorial Board :

1. Int Journal of Electrical ,electronics and computer engineering (IJEECE) 2. Int conf. on comp. intelligence, communication systems and networks(CICSYN) 3. İnt conf on Computational Intelligence and Communication Networks (CICN) Referee duties :

1. European Commission Services (ECS) 2. Istanbul technokent , 3. TTGV project inspectorship 4. ISBAK, İstanbul 5. Technology ministry, Turkey 6. Int conf on research in computational intelligence and comm. networks (ICRCICN) 7. Int conf. on recent trends in science technology,management and social development 8. Int conf on communication systems and network technologies 9. EDAS conference services 10. Easychair conference services Invited speakers :

1. Conference about Recent developments in NATO, Brussel, Belgium, 2007 2. Conference on Biological systems, Heidelberg- Germany , 2004 3. SCI panel NATO research organization, Antalya , Turkey, 2010 4. TV program, Today’s Computers, Baskent TV , Ankara, Turkey , 2003

Academic Experience:

1. Sept 2017 – Sept 2018: Professor and Chairman, EE Dept, İstanbul Gelişim University, İstanbul, Turkey

2. July 2016 – Sept 2017: Professor and Dean of Engineering faculty, Final University, Girne , Cyprus

3. Sept 2015 – June 2016 : Professor , EE Dept ,Aksaray University, Aksaray, Turkey , (Part time)

4. Sept 2015 – July 2016 : Professor , Computer Eng Dept , Military Academy, Ankara, Turkey , (part time)

5. July 2012 - July 2016 : Professor, Computer Eng Dept, Ankara University, Ankara, Turkey

6. October 2003 – June 2012: Professor and chairman, Computer Engineering Dept, Ankara University, Ankara,Turkey 7. October 2002 – October 2011: Professor and Chairman, Informatics Dept, Ankara University, Ankara,Turkey 8. August 2001 – September 2002: Professor and Chairman, Computer Eng. Dept, Pamukkale University, Denizli, Turkey

9. August 1999 – August 2001: Professor and Chairman, Computer Eng. Dept, Baskent University, Ankara, Turkey 10. August 1997 – August 1999: Professor and Chairman, Computer Eng. Dept, Çankaya University, Ankara, Turkey 11. June 1996 - August 1997: Professor and Chairman, EE Eng. Dept, Çukurova University,Adana, Turkey

12. February 1994 - August 1997: Assoc Prof , Electronics and Physics Dept , Kuwait University, Kuwait 13. July 1990 – February 1994: Assoc Prof, EE. Eng. Dept, King Fahd University, Dhahran, Saudi Arabia

14. September 1984 – July 1990: Ast Prof, Electronics and Physics Dept, Kuwait University, Kuwait 15. January 1983 - September 1984: Research Fellow., Electronics and Physics Dept, Queen's University, Belfast , UK 16. July 1981 - January 1983: Project Manager, Research Dept, Testaş, Ankara, Turkey 17. September 1976 - October 1977: Research Engineer, Delta International Inc., Electronics Dept, Birmingham, UK 18. December 1974 - September 1976: Research Engineer, Nottingham University, Electronics Engineering Dept, UK

Administrative experience:

1. Sept 2017 - Sept 2018; - Member of Engineering Faculty academic board - Faculty Erasmus Coordinator - Coordinator, Student Technology society, Gelisim University - Head of university renewable energy centre

2. July 2016 – Sept 2017; - Acting Rector - Dean , Engineering Faculty - Member of University Senate 3. July 2012 - July 2016 : - Member of Engineering Faculty executive board - Member of Informatics department Post graduate board - Department Erasmus Coordinator - Coordinator , Computer society, Ankara University

4. October 2003 – June 2012 : - Chairman, Computer Engineering Department, Ankara University - Member of Engineering Faculty board, - Member of Engineering Faculty executive board (since 2007) - Member of Graduate school board - Member of Distance education board Member of Continuous education board 5. January 2007 – June 2010 :

Director, TOEFL examination centre ( STN12250 A and STN12250 B centres) 6. September 2004 – June 2010 :

Director, Government Pension plan centre examination board

7. October 2002 -2010: Chairman, Informatics dept, Ankara University, Ankara, Turkey

8. August 2001 – September 2002: - Chairman, Computer Eng dept , Pamukkale University, Denizli ,Turkey - Member of Faculty board, - Member of Faculty Administration Board 7. August 1999 – August 2001: - Acting Dean, Engineering Faculty, Başkent University, Ankara,Turkey - Chairman Computer Engineering Dept ,

- Member of Faculty board, - Member of Faculty Administration Board - Member of University Senate 8. August 1997 – August 1999: - Chairman, Computer Eng Dept , Çankaya University, Ankara, Turkey - Member of Faculty board, -

- Member of Faculty Administration Board

- Member of University Senate

9. June 1996 – July 1997: Chairman, E&E Engineering Dept , Çukurova University, Adana, Turkey

10. February 1994 - July 1997: Administrative committee memberships, Kuwait University, Kuwait

11. September 1990 - January 1994: Administrative committee memberships, King Fahd University, Saudi Arabia

12. September 1984 – July 1990: Administrative committee memberships, Kuwait University, Kuwait

13. September 1984 – September 1989: Technical Consultant, Mubarak Hospital, Kuwait

14. September 1987 – September 1989: Part time researcher, KSIR Research Institute, Kuwait

15. February 1983 – September 1984: Full time warden, Student Halls of residence, Queens University, UK

16. September 1983 – September 1984: Research Fellow, Queens University, UK

17. September 1977- June 1980: Research Assistant, Loughborough University, UK

18. December 1975 – December 1976 Sub warden, Nottingham University Halls of residences

19. June 1975 - December 1975 : Military Service, Army Communication Academy, Ankara, Turkey

Business Experience :

Sept 2012 – present :

- Consultancy, http:// academicrfid.com - Wireless sensor networks, RFID applications, design & projects

Sept 1989 - Sept 2002 : - Director, Laser Optics and Electronics Ltd. company.

- Hybrid systems are developed with Electronics and laser devices.

- Business is carried out in Turkey, Saudi Arabia, Kuwait, Oman.

Projects (After MSc and PhD):

1. September 2016 – July 2018: - Development of airborne collision avoidance system for low flying helicopters - Design and development of a computerized 3D scanner 2. September 2015 – July 2016: - Development of static and dynamic Geofencing with electronic handcuffs - Design and development of computerized restaurant system (Inamo) - Design and development of OCULUS virtual reality system

3. March 2013 – June 2015: - Hand palm print identification by using image processing techniques - Retina identification by using image processing techniques 4. January 2012 – March 2013: - Localization by using wireless sensor networks and GPS +GPRS techniques 5. April 2011 – December 2012: - Real time Indoor Position detection by using RFID devices 6. April 2010 – April 2012: - Computer simulation of eye retina disorders by using Zernike polynomials 7. January 2008 - June 2011: - Setting up Computer faculty in Kabul Polytechnic University, NATO, Afghanistan 8. January 2009 – March 2010: - Construction of 3D laser scanner to visualize 3D objects 9. December 2007 – December 2008: - Airborne visual identification of land objects by using pilotless model aircraft, 10. November 2005 – November 2007: - Setting up and operating a parallel processor unit with 16 nodes, 11. October 2003 – October 2005: - Determination of sub surface cracks by using thermal simulation and Numeric

Analysis Techniques, Ankara University, Ankara, Turkey - Presentation of Anatolian Museum by using virtual reality and multimedia

techniques 12. October 2002 – October 2003: - Dynamic motion detection on metal surfaces by using digital image processing techniques

13. August 2001 – September 2002: - Development of Visual hotel management software,

- Development of Visual student course and time-table software, - Development of archaeological site simulation, Pamukkale University, Turkey

14. August 1997 – August 2001: - Intelligent Hospital information management system - Simulation of 3D robot arm, Başkent University, Turkey 15. June 1994 - August 1997: - Determination of Ocean surface waves by using digital image processing techniques, Kuwait University, Kuwait 16. May 1993 - June 1994: - Quantizing the amount of rust on metal surfaces by using digital image processing techniques, King Fahd University, Saudi Arabia 17. January 1992 - May 1993: - Determination of capillary waves on ocean surfaces by using remote sensing and image processing techniques, King Fahd University, Saudi Arabia 18. January 1990 - July 1990: - Determination of sub surface cracks by using thermal simulation and Numeric analysis techniques, Kuwait University, Kuwait 19. September 1988- September 1989: - Identification of oil spills on ocean surfaces by using remote sensing and Lidar techniques, KISR Institute, Kuwait

20. January 1987 – December 1989: - Identification of sub surface features in solids by using Photo Acoustic image processing techniques, Kuwait University, Kuwait 21. January 1986 - December 1986: - Determination of dynamic heart motion by using Ultrasonic techniques, Mubarak Hospital, Kuwait 21. September 1984 - December 1986: - Development of a computer interfaced video system to display the sub surface features of metals, Kuwait University, Kuwait 22. January 1983 - September 1984: - Investigation of Liquid surfaces by using Photon correlation techniques, Queens University, Belfast, UK 23. May 1982- January 1983: - Development of Laser distance finder, Testaş R&D, Ankara ,Turkey 24. July 1981- May 1982 : - Development of military EM interference filters, Testaş R&D, Ankara, Turkey 25. December 1974 - September 1976: - Computer simulation of EM wave patterns in Microwave cavities, Nottingham University, UK 26. September 1976 – October 1977: - Design and development of security systems, R&D on alarm systems , Delta International, Birmingham, UK

Visiting Researcher : 1. July 1993 - September 1993:

Surface metrology research, Manchester University, UK 2. July 1990 – September 1990:

NDT research, Tubitak Research Institute, Gebze, Turkey

3. August 1986 - September 1986: Subsurface image processing research, Bowling Green University, USA

4. June 1986 - August 1986: Photo Acoustic image processing research, Wayne State University, USA

Books :

- Computer education , Bıçaklar publishers, Turkey , 2006, Editor & section author - Basic computer usage , Academy publishers, Turkey, 2003, Editor - Entrance to computers ,Ankara Univ publishers, Turkey, 2002 , Author - Piezoelectric Transducers and their Apps , Elsevier Publishing, Holland, 1985, Editor

Industrial Consultancy : 1. Alamethane ltd 2015-2016

Position detection in buildings using RFIDs and developing algorithms

2. Turk Tractor Ltd 2013-2015 Position determination of tractors by using RFID and audio visual techniques.

3. Gelisim technique Ltd 2011-2012 CAD supported software development for environmental planning and landscape

design 4. Tektronik Engineering Ltd 2011 – 2012

Development of Multipurpose command and control systems

5. Altıgen Informatics and software Ltd 2005—2007 3D simulation of military exercises with computers by using Artificial Intelligence and graphic techniques

6. Ayment Computer Ltd 2004--2006 To design and construct model casts for most efficient pattern cutting in textile

industry

Conference Organization: (conference chairman)

1. September 2017 IEEE 9th International Conference on Computational Intelligence and Communication

Networks (CICN 2017) ,Girne Cyprus 2. October 2006

3rd International Bulgarian – Turkish Computer science Conference, Istanbul, Turkey 3. May 2002

Information technologies conference, Pamukkale University, Denizli, Turkey 4. May 1992

Electromagnetic Applications conference, Çukurova University, Adana, Turkey

Conferences Attended:

1. 21 March – 24 march 2015: International conference on advances in engineering science 1 paper, ICAESAM’ UK

2. 22 March – 26 march 2014: International conference on research and technology,1 paper, ICRSET’ Dubai

3. 14 July – 15 July 2006 6th data mining Congress, 1 poster, ICDM 2006, Leipzig, Germany

4. 14 October – 17 October 2004 : Complexity and Modeling of Biological networks, Braunschweig, 1paper , Germany

5. 7 October - 10 October 2003: Information Technology Conference , 1 paper , Ege University, İzmir, Turkey

6. 24 September - 26 September 2003: Signal processing Conference, 1 paper , 18 Mart University, Çanakkale ,Turkey

7. 4 May - 6 May 2002:

Information and computer applications conference, 2 poster, Pamukkale University, Denizli, Turkey

8. 15 November –17 November 2000: 10.th Computer applications Conference, 1 paper, Lefke University, N. Cyprus

9. 15 October –16 October 1998:

2.nd Turkish – German computer applications conference 1 paper, Justus-Liebig University / Selçuk University, Konya, Turkey

10. 6 July – 12 July 1997: 4th International Composite materials conference, ICCE/4, 1 paper, Hawaii, USA

11. 12 February – 15 February 1996: Automatic control and computer applications conference, 1 paper, Ege University, Izmir, Turkey

12. 15 January – 22 January 1995: Laser and computer application conference, 1 paper, Kuwait University, Kuwait

13. 20 November –25 November 1995: Remote sensing of oil spills conference, 1 paper, KISR Institute, Kuwait

14. 10 April – 13 April 1993:

Industrial computer control conference, 1 paper, King Fahd University, Dhahran, Saudi Arabia

Publications: (SCI /SCIEXP are in red) 2017 85. Koyuncu H., Koyuncu B. An application of Kalman Filtering and artificial Neural Network with K-NN position detection technique , Wireless Sensor network (WSN) , ISSN: 1945-3078, Vol 9, No 8, pp 239-249, August 2017 2016 84. Koyuncu H., Koyuncu B. Adaptive Indoor localization by using Environmental Thresholding and Virtual

Fingerprint Technique, International Journal of Engineering research and Applications

(IJERA),Vol 6,issue 12, part 1, pp 86-91 December 2016 83. Koyuncu H., Koyuncu B. Environmentally corrected RSSI based real time location detection system,

International Journal of computer science and information technology,(IJCST), Vol 8,

No 6 , pp 39-48, December 2016 82. Koyuncu B., Ozdemir Z. Real time localization and leaflet map geofencing by using Sim900 based GPS/ GSM/ GPRS GL865, International Journal of Electronics circuits and systems, Vol 5 ,issue 2,

IJECS, pp 47-52, 2016 81. Koyuncu.B., Labranche. E., Koyuncu. H. Magnifying Small Image Areas by using an Image zooming technique, Journal of Environmental Science,Computer science and Engineering and technology, JECET, E-

ISSN 2278-179X Section C, Vol 5 , No 2, pp 157- 164, 2016 80. Koyuncu.B., Ozdemir.Z Real time position detection by using GPS+GSM+GPRS and Arduino Mega based Telit GL865, International Journal of Electronics Communication and Computer

Engineering, Vol 7 ,issue 1, IJECCE, pp 44-48, 2016 2015 79. Koyuncu.H., Koyuncu. B Intelligent Front desk hotel management Int. Journal of Artificial Intelligence and

agent technology, IJAIAT,Vol 3, Issue 2, pp 56-58 , Sept 2015 78. Koyuncu.H., Koyuncu. B A Real Time Application of Active RFIDs in Multicar Environment for Road Safety,

Int. Journal of Research studies in Computer science and engineering , IJRSCSE , Vol 2, Issue 9, pp 24 – 28 , September 2015 77. Koyuncu.B., Koyuncu. H A precision Motion control of a circular platform by using Stepper Motors, Int. Journal of Electronics Communication and computer engineering , IJECCE , Vol 6, Issue 5, pp 508-601 2015 76. Koyuncu.B., Koyuncu. H Intelligent Hospital Management System (IHMS) , 7th Int. Conference .on Computational Intelligence and communication networks, CICN 2015, 978-1- 5090-0076-0/15 $31.00 © 2015 IEEE, pp 1601-1604 75. Koyuncu.B., Gokce.A , Panahi.P Introduction of unity game engine in reconstruction of an archaeological site, SOMA , 19th symposium on Mediterranean archaeology, Nov 2015

74. Koyuncu.B., Gokalp.Y Hand palm Identification by using image processing techniques, Int. journal of emerging technology and advanced engineering ISSN 2250-2459, Iso9001:2008 , Vol 5, Issue 7, pp 508-512, July 2015

73. Koyuncu.B., Panahi.P,Varlıoglu.S Comparative indoor localization by using landmark and cricket systems, Int. journal of emerging technology and advanced engineering ISSN 2250-2459, Iso9001:2008 , Vol 5, Issue 6, pp 453-456, June 2015

72. Koyuncu.B., Meral.E, Panahi.P Real time Geolocation tracking by using GPS+GPRS and Arduino based SIM908, Int. journal of electronic circuits and systems, (IJECS), ISSN (Online) 2277 – 5870, 2015,Vol 4,issue 2, pp 148-150, July 2015.

71. Koyuncu.B., Koyuncu.H. Celik.T,Varlıoglu.S Distance calculations by using Bi-section algorithm with RFID signals, Int. conference on advances in engineering sciences and applied mathematics (ICAESAM’15), pp 87 – 90 , March 2015, London ,UK

70. Koyuncu.B., Gokce.A, Panahi.P Reconstruction of an archaeological site in real time domain by using software techniques , 5th Int. conference on communication system and network technologies, IEEE xplore ,CSNT, pp 1350-1354, 2015

69. Koyuncu.B., Masti .S 3D reconstruction of human skulls by using Tomography images, Int. Journal of computing, (IJC) , Vol 5 ,issue 1, ISSN 2231-2153, pp 48- 50, 2015

2014 68. Koyuncu.B., Panahi .P

Kalman Filtering of Link Quality Indicator values for position detection by using WSNS, Int. Journal of computing, communication & instrumentation Eng. (IJCCIE) , Vol 1 ,issue 1, 2014 , ISSN 2349-1469, pp 129- 133

67. Koyuncu,B., Varlıoglu.S Application of Elliptic Filtering to reduce Random variations of recorded LQI values

with WSNs, 2nd Int. Conference on research and technology ,ICRSET’ 2014 , March

21-22, 2014 Dubai(UAE) , pp 15-19

2013

66. Koyuncu,B., B. Ugur, Panahi,P Indoor location determination by using RFIDs ,IJMAN, Int. journal of mobile and Adhoc Networks , Vol 3, issue 1, 2013, ISSN (Online) 2231:6825

2012

65. Koyuncu, B., Kocabaşoğlu.P Identification of corneal aberrations by using computer techniques , IJCES , int ,journal of comp and eng science , Vol 2 ,issue 3, pp 9-16, 2012 ,ISSN 2250:3439

64. Koyuncu,B. , Iankov, K., Vaptzarov.P Graphical representation of Radar Data from on line meteorological objects, ICASTOR Journal of Engineering, Vol 5 , No 2(20) , pp 61-75 , ISSN – 0974–407X, 2012

2010 63. Koyuncu,B.,Kullu .K

3D surface reconstruction of objects by using stereoscopic viewing , ICASTOR Journal of Engineering. Vol 3 , No 3, pp 257-268 , ISSN – 0974–407X, 2010

63A. Koyuncu,B.,Kullu .K 3D surface reconstruction of objects by using stereoscopic viewing , 4th International

Conference on Applied Mathematics, Simulation, Modelling (ASM'10), Corfu Island,

Greece, July 22-25, pp 170-175, ISBN: 978-960-474-210-3, 2010 62. Koyuncu, B., G. Bostancı:

3D battle field modelling and simulation of war games , International journal of Computers , ıssue 1, volume 4 , 2010 , pp 1- 8

61. Koyuncu,B.,Kullu .K Development of an optical 3D scanner based on structured light ,9th WSEAS Int.Conf.

on Artificial Intelligence, Knowledge Engineering and data bases (AIKED’10), 2010,

pp 17-22 ISBN 978-960-474-154-0

2009

60. Koyuncu, B., Kocabaşoğlu .K Simulation of Corneal Aberrations by using Zernike Polynomials ,Sensors, signals, visualization, imaging, simulation and materials, 2009, pp 174 - 178 , ISBN 978-960-474-135-9

59. Koyuncu, B., G. Bostancı Using Web Services to Support Battlefield Visualization and Tactical Decision making, International Conference on computer modelling and Simulation , CSSIM 2009 , pp 138-141, IEEE xplore, Brno, 2009

58.Koyuncu,B., G. Bostancı:

Using Lancaster combat models to aid battlefield visualization , 2nd

IEEE International Conference on Computer Science and Information Technology, ICCSIT,pp. 290-292, China, 2009

57. Koyuncu, B., G. Bostancı: A scenario based Virtual Military Sandbox implementation Using web services, International Conference on Advanced Computer Control ,IEEE xplore -ICACC-2009, Singapore 2009 , pp 767-771

56. Koyuncu, B., G. Bostancı: Development of a software tool for decision making in combat models , International Journal of Mathematics and Computation , IJMC, Vol 2, No M09 CESER 2009, pp 106 - 114, ISSN 0974-5718

2008

55. Koyuncu, B., R. Kelebek: E-Bay Shopping site , 5

th international conference on electrical and

computer systems , EECS-08, November 2008 , pp 69-71 54. Koyuncu, B., E. Özcan:

Intelligent motion by using mobile robot arm +video unit, 5th

international conference on Electrical and computer systems , EECS-08 , November 2008 , pp 23-25 53. Koyuncu, B., G. Bostancı: Terrain visualization using TerraGen,3D Studio Max and open GL, International joint seminar in Engineering (IJSE) , August 2008 , pp 205-209

52. Koyuncu, B, Akdogan F: Reconstruction of facial images by using facial motion and image processing techniques, Journal of X-ray Science and Technology, Journal of x-ray Science and technology JXRST, 2008, pp 159- 169

51. Koyuncu,B.,M.Güzel: A visual Tool for Kinematics Analyses of Lynx-6 Robot Arms together with dynamic modelling of dc motors ,International conference on Automation, Robotics and control systems, arcs-08 ,July 2008, pp 145-

150 ISBN 978 1-60651-001-8 50. Koyuncu,B.,M.Güzel: Software Analysis of Lynx 6 Robot Arm , International conference on Automation, Robotics and Control systems , arcs-08 , July 2008, proceedings , pp 1-8, ISBN 978-1-6065

4 49. Koyuncu, B., A. Avanos: Language management system (LMS) , 2nd İstanbul informatics conference , June 2008 , Conference Proceedings pp 113-120.

48 Koyuncu,B., P.Kocabaşoğlu: Virtual Campus ,Multimedia systems and signal Processing proceedings of

8th WSEAS, April 2008 , pp280 – 284 46. 47. Koyuncu,B., P.Kocabaşoğlu:

Virtual Campus , International Journal of Computers ıssue 4 ,volume 1, April 2008, pp280 – 284

2007

45x. 46. Koyuncu,B., M. Secir: Student time table by using graph coloring algorithm, 5th International

conference on electrical and electronics engineering , Dec 2007, Eleco 2007, pp 1-5

45. Koyuncu, B., G. Bostancı: Development of an image processing software. Computer Engineering Journal, Vol 1 , No 2 , 2007, pp 54-57

44 44. Koyuncu, B., M. Güzel: Software development for the Kinematic analysis of a Lynx 6 Robot arm. Proceedings of world Academy of Science ,Engineering and Technology ,

WAEST Vol 24, 2007 , pp 252-257 43 43. Koyuncu, B., M. Güzel:

Chess board application of 6 axes robot arm by using inverse kinematics Equations. Computer Engineering , Vol 1 , No 1 , 2007 , pp 59-67

42. Koyuncu, B., G. Bostancı: Virtual reconstruction of an ancient site: Ephesus. 1st International Congress of Euroasian Archaeology, Soma Proceedings, SOMA proceedings 2007, pp

233- 236 Archaeopress UK 41. Koyuncu, B., A. Pahsa:

A comparative approach for contour detection of brain tumours by using image correlation techniques on Tomography images. 6th WSEAS international conference on Applications of Electrical Engineering AEE’07 , 2007 ,proceedings pp 251-255 ISBN 978-960-8457-71-3

40. Koyuncu, B., A. Pahsa: Radiation dosimetry detection system to generate brain tumour contour

images. Health Informatics and Bioinformatics (HIBIT), 2007 , ISBN 978-975-429-257-2

39. Koyuncu, B., A. Pahsa: Contour profiling of brain tumours by using perceived brightness

information and image Correlation techniques. International Conference on Artificial Intelligence and Pattern Recognition, AIPR, 2007, proceedings pp50-52 , ISBN: 978-0-9727-412-3-1

38. Koyuncu, B., A. Pahsa: Generating contours of brain tumour images by using their optical density

information and Image correlation techniques, Journal of X-ray Science and Technology, JXRST, v. 15, no.1, pp. 1-7, 2007

2006

37. Koyuncu, B., A. Pahsa: 3D visualization of brain slices by using computer techniques, Industrial Conference on Data Mining, Poster, Proceedings, ICDM, 2006 , pp 127-134 , ISSN 1617-2671

36. Koyuncu, B., A. Pahsa: Contour profiling of brain tumour areas by using image correlation and peak

detection techniques. International Journal of Computer Science and Network Security, IJCSNS, v. 6, no. 11, p. 46 - 48, 2006 , ISSN: 1738-7906

35. Koyuncu, B., A. Pahsa: 3D visualization of brain slices by using computer techniques, 15

th Turkish

Symposium on Artificial Intelligence and Neural Networks, TAINN, p. 25 - 32, 2006

2004 34. Koyuncu, B.:

Current mode dual – input integrator and differentiator using current conveyors. Neu-cee Proceedings, pp. 66- 68, 2004

33. Koyuncu, B.: Automatic control of a laser platform by using quadrant detection technique, Neu-cee Proceedings , pp 164 – 167, 2004

2003

32. Koyuncu, B.: Determination of in-plane surface displacements of objects by using speckle

correlation and image processing techniques. ITAF Proceedings on Information Technology, p. 243 – 251, 2003

31. Koyuncu, B.: Ultrasonic flaw detection by using PC based correlation techniques, ICSP

Proceedings on Signal Processing ,E009, ISSN 1304-2386, v. 1, no. 2 , p. 35-37, 2003

1996

30. Koyuncu, B., M. Ashraf: Wave amp & freq measurements on water surfaces by using stereo

imaging techniques, SPIE Proceedings, p. 40 – 54, 1996

29. Koyuncu, B.: Quantization of surface waves in an experimental water tank by using

image processing techniques, SPIE Proceedings, p. 536 – 545, 1996 2 28. Koyuncu, B., A. Nasser:

Real time wave amplitudes measurements by using on line computer techniques, J. Phys Measurement Science & Tech., no. 7, p. 1-4, 1996

1995

27. Koyuncu, B., A. Yasin, A. Nasser: Quantization of surface rust by using laser imaging techniques,

Optics & Lasers Technology, v. 27, no. 3, p. 199-204, 1995 26. Koyuncu, B.: Heart pulse rate monitor, Electronics World, p. 605-607, 1995 25. Koyuncu, B.: PC remote control of appliances by using telephone lines, IEEE Trans.

on Consumer Electronics, v. 41, no. 1, p. 201- 209, 1995

24. Koyuncu, B., A. N. Abu Rezq: Application of finite diff. method to determine the subsurface

discontinuities in metals, Laboratory Microcomputer, v. 13, no. 1, p. 29-34, 1995

23. Koyuncu, B.: A Laser quadrant detection technique for Capillary wave measurements, Optics and Lasers in Engineering. V 22, pp. 53-64, 1995

1994 22. Koyuncu, B.: Computer simulation of subsurface features in opaque solids, Laboratory

Microcomputer, v. 11, no. 4, p. 151-157, 1994 1993

21. Koyuncu, B.: PC based ultrasonic flaw measurement by using random signal correlation technique, Laboratory Microcomputer, v. 12, no. 2, p. 63-

68, 1993 20. Koyuncu, B., K. Bala:

A fast algorithm for detecting the phase angle and power factor. Laboratory

Microcomputer, v. 12, no. 2, p. 45- 51, 1993 19. Koyuncu, B., K. Bala: An intelligent multi-level phase shifter. Laboratory Microcomputer, v. 12,

no 1, p. 13-15, 1993 1991

1 18. Koyuncu, B., K. Bala: A novel flow rate measurement technique using microprocessors, Laboratory Microcomputer, v. 10, no 4, p.151-153, 1991 17. Koyuncu, B., K. Bala: Microprocessor controlled automatic Sun Tracker, IEEE Transactions

on Consumer Electronics, v. 37, no. 4, p. 913-917, 1991 1990

16. Koyuncu, B.: Theoretical determination of temperature distributions for non-destructive depth profiling of opaque solids, Optics and Lasers in Engineering, v. 14, no. 5, pp. 23-29, 1990

15. Koyuncu, B.: Photoacoustic imaging of subsurface features in metals, Optics & Lasers in

Engineering, Vol 13, no 1, p. 17-26, 1990

1989

14. Koyuncu, B.: Photoacoustic signal detection technique by using gated vector lock-in amplifier,

Optics and Lasers inEngineering, v. 12 , p. 203-211, 1989 13. Koyuncu, B.: Software development for the 8085 microprocessor based data logger,

Laboratory Microcomputer, v. 9 , p. 15-22, 1989 1988

12. Koyuncu, B.: A microcomputer system based on 8085 microprocessor for data logging

and processing, Laboratory Microcomputer, v. 7, no. 4, pp 137-144, 1988 11. Koyuncu, B., Farhat, A.: Data acquisition using a vector lock-in amplifier and a mechanical scanner

interfaced to a PC, Laboratory Microcomputer, v. 7, p. 96 – 102, 1988 10. Koyuncu, B.:

Computer controlled acoustic generator, Elector Electronics, v. 14, no. 155,

1988, p. 28-33, 1988 1987

9. Koyuncu, B.: 3D plotting of photo acoustic data using a microcomputer interfaced to a

mechanical scanner, Laboratory Microcomputer, v. 6, no. 4, p. 171-175, 1987 8 8. Koyuncu, B.:

Resonant characteristics of Pzt-4 transducers for photo acoustic signal detection, Optics and Laser Technology, v. 19, no. 5, p. 265-268, 1987

7 7. Koyuncu, B.: Measurements of ventricular distances using ultrasonic techniques,

Elektor Electronics, v. 13, no.148, p. 31-34, 1987 1986

6. Koyuncu, B.: A study of Pzt-4 transducer surface motions related to their underwater

far field beam patterns, Acoustic Letters, v.10, no. 4, p. 51-58, 1986 5. Koyuncu, B.: Computer controlled laser Nephelometer, Laboratory Practice, v. 35, no. 11,

pp.72-73, 1986

1985

4. Koyuncu, B., Earnshaw, J.: Semi-automatic determination of scattering vector in Small Angle Light Scattering. J Phys E Sci Instrum., v. 18, p. 830-833, 1985

3. 3. Koyuncu, B., Earnshaw, J.: Vib Vibration isolation for Laser Light Scattering from liquid surfaces. J Phys EE, Sci Instrum., v. 18, p. 396-398, 1985

19 1981

2. 2. Koyuncu, B.: The The investigation of high frequency vibration modes of PZT transducers using ESPI Techniques. Optics and Lasers in Eng. v.1, p. 37-49, 1981

1980

1. 1. Koyuncu, B., Cooksoon, J.: Sem Semi-automatic measurements of Small High Frequency Vibrations Using Time Averaged ESPI. J Phys E, Sci Instrum, v. 13, p. 206-208, 1980

Lecture Notes + Laboratory manuals written: 1. Circuit Theory, 2. Digital Logic Design, 3. Analogue Electronics, 4. Advanced Electronics, 5. Microprocessors, 6. Industrial Automation, 7. C Language, 8. Pascal Language, 9. Microprocessor Interfacing, 10. Instrumentation, 11. Computer Architecture, 12. Image processing 13. Remote sensing 14. Wireless networks 15. RFIDs 16. Networks 17. Cisco 18. Computer Fundamentals (windows 2000), 19. Basic Computer Education (windows XP),

BSc Senior Projects 1. Determination of Solution Concentrations Using Laser Tech. (1984) 2. Measurements of Distances Underwater Using Sonar Techniques (1984) 3. Underwater Communication Using Hydrophones (1985) 4. Acoustic Pressure Measurements Using Laser Techniques (1985) 5. Computer Controlled Music Generator (1985) 6. Laser Piano (1986) 7. Computer Controlled Curve Tracer in Real Time (1986) 8. Computer Controlled Mechanical X-Y Scanner (1986) 9. Position Control of Laser Beam by Using Quadrant Detection Tech.(1987) 10. A Microprocessor System for Universal PC Interfacing (1987) 11. Software Development for Universal Interfacing Card (1987) 12. Microprocessor Controlled Temperature Display Unit (1988) 13. Metal Detector (1988) 14. Analogue to Digital Converter Card for IBM PC / Xt (1988) 15. Laser Data Transmission for Sound Reproduction (1988) 16. Photo acoustic Signal Detection by Using Gating Techniques (1989) 17. Store Management by D-Base III Software (1989) 18. Electromagnetic Interference Filters 1989) 19. Class D Power Amplifier (1989) 20. Precision Power Supply (1989) 21. Microprocessor Controlled Universal Clock (1990) 22. Digital Band pass Filters (1990)

23. Infrared Alarm Detector (1990) 24. Microprocessor Controlled Function Generator (1990) 25. Automatic Sun Tracker (1991) 26. Ultrasonic Detection Using Noise Correlation Tech (1991) 27. Eprom Programmer (1991) 28. Microprocessor Controlled TV Antenna Rotator (1992) 29. Subsurface Crack Simulation by Using Finite Difference Tech (1992) 30. Car Door Alarm (1992) 31. Robot Bug (1992) 32. Electronic Dice (1992) 33. Digital Frequency Counter (1992) 34. Digital Post Box Indicator (1993) 35. Voltage Controlled Current Source (1993) 36. Digital Phase Meter (1993) 37. PC Controlled Hearth Beat Monitor (1993) 38. Computer Controlled Wind Generator (1995) 39. Development of Computer Virus/Antivirus (1995) 40. Surface Texture Analysis by Using Image Processing Tech. (1995) 41. Computer Interfaced Robot Arm (1996) 42. Physics Lab Design in the Internet for Online Education (1999) 43. Microprocessor Controlled Incubator (2000) 44. Surface Wave Analysis by Using Image Processing Techniques (2000) 45. Hotel Management Using Visual C Builder (2002) 46. Design and Construction of Digital Writing Pad (2006) 47. Student and Class Timetable Software Package (2006) 48. Virtual Reconstruction of an Archaeological Site (2006) 49. Intelligent Hospital Information System, IHIS (2007) 50. Language management system ,LMS (2007) 51. Intelligent motion by using mobile robot +video unit (2007) 52. Virtual University campus by using image modeller (2007) 53. Car Rental agency (2007) 54. Web based shopping site (2007) 55. Building Windows firewall (2008) 56. Graph Viewer in Java (2008) 57. Remote identification by using mobile robot arm and image processing unit (2008) 58. Edge detection by using Sobel and Prewitt image filtering (2008) 59. Developing a polygon thinning based on Voronol and Delaunay triangulations (2008) 60. Generating stunning visual effects : water , fire and plasma (2008) 61. Hough transform (HT) and its applications in pattern recognition (2008) 62. Determination of cracks in metals by using finite modelling techniques. (2008) 63. Wireless pattern recognition by using a pilotless model aircraft (2009) 64. Robot car with obstacle sensors by using PIC control (2009) 65. Rat maze by using fuzzy logic (2009) 66. Fingertip heart rate monitor and analyser (2009) 67. Remote control of appliances’ by using telephone lines (2009) 68. Intelligent scissors (2010)

69. Using programming to display the personal coordinates .in buildings (2010) 70. A microprocessor controlled universal clock (2010) 71. ımage reconstruction of 3D objects with a 3D video scanner (2010) 72. Fusing Stereo images into its equivalent cyclopean view (2011) 73. Position determination by using k nearest algorithm (2011) 74. Intelligent Image interpretation software system (2011) 75. Multiple database structure and Kalman filtering (2011) 76. Location detection by using particle filtering (2011) 77. 3D virtual viewer on mobile devices (2011) 78. Position detection by using novel adaptive cooperative location algorithm (2011) 79. Landmark position detection by using RFID and reference point techniques (2012) 80. RFID data selection by using Chebbuchev and Elliptic filtering techniques (2012) 81. Location detection by using particle and Knn algorithms (2012) 82. 3D position detection by using Std, Kalman and linear position data (2012) 83. Position detection by using wireless communication network in indoors (2012) 84. By using regression analysis to determine Knn and weight algorithms (2013) 85. Automatic product selection and payment by using RFID in supermarkets (2013) 86. Position detection by using segmentation algorithms (2013) 87. Position detection by using random particle filtering (2013) 88. Generation of virtual fingerprint by using exponential taper functions (2013) 89. Fingerprint identification by using image processing techniques (2014) 90. 3D Skull reconstruction by using tomographic images and software techniques (2014) 91. Facial reconstruction by using 3D scanner data and software techniques (2014) 92. Elliptic band pass filtering of RSSI data by using software techniques (2014) 93. Determination of article stealing by using computer techniques (2014) 94. Virtual animation and scenario building by using unity software (2014) 95. Computer simulation of elliptic filtering (2014) 96. Prediction of graph points by using bi-sectioning algorithm (2014) 97. Modelling cumulative distribution with software techniques (2014) 98. Geofencing for house arrest by using GPS+GPRS arm bracelets (2014) 99. Reconstruction of objects by using 3D max data and unity motor software (2014)

100. Virtual reality of Hagio Sofia church with real time motioning (2015)

101. Reconstruction of Augustus temple in virtual reality in real time domain(2015)

102. GPS position detection by using Google maps (2015)

103. Distance calculation by using bi-sectioning algorithm with RFID signals(2015)

104. Integrated GPS position detection by using GPS and video signals(2015)

105. 3D construction of human skull by using tomography images(2015)

106. Personal identification by using human eye retina and image processing (2015)

107. Hand palm identification by using image processing techniques (2015)

108. Real time motion by using unity programming in a religious temple (2015)

109. Development of OCULUS virtual reality system + programming (2016)

110. Android program development for food basket (2016)

111. Android program development for restaurant selection in an area (2016)

112. Dynamic Geofencing development with GPS systems (2016)

113. Emergency Data management system for national Dams (2016)

Graduate Theses 1. Airborne Optical Transmitter and Receiver Network (1995) 2. PC Remote Control by Using Telephone Lines (1994) 3. Ultra Low Noise, Wide Band AC Amplifier (1994) 4. A Narrow Band Active Notch Filter with Tuneable Centre Frequency (1993) 5. Wide Band Noise Generator (1992) 6. Precision Power Amplifier (1992) 7. 3D Visualization of Brain Slices by Using Computer Techniques (2005) 8. Six Axes Robot Arm Control (2005) 9. Determination of Facial Paralysis by Using Image Processing Techniques (2006)

10. 3D Modelling of the Human Skull by Computer Techniques (2007) 11. Contour Profiling of Brain Tumours by Using Image Processing Techniques (2007) 12. Battle field modelling and simulation of war games (2008) 13. Construction of 3D scanner by using stereoscopic visualization techniques (2009) 14. Simulation of cornea aberrations (2011) 15. Position detection by using landmark technique and RFID (2012) 16. 3D position identification by using cricket technique (2013) 17. Real time position detection by using GPS+GPRS+GSM techniques (2013) 18. Hand palm printing detection by using image processing (2014) 19. Retina identification by using image processing (2014) 20. Fingerprint detection by using image processing techniques (2014)

Undergraduate courses given :

1. General physics 1& 2 2. Programming in C and C++ 3. Programming in Java 4. Assembly programming 5. Programming in Fortran and Basics 6. Programming in Pascal 7. Linear circuit theory +lab 8. Analog Electronics + lab 9. Digital Electronics + lab 10.Instrumentations and measurements

11.Advance Analog Electronics +lab

12.Microprocessors + lab

13.Microprocessor interfacing +lab

14.Logic Design+lab

15.Signals and systems

16.Image processing + lab

17.Image processing applications

18.Industrial electronics +lab

19.Computer Architecture +lab

20.Non destructive testing + lab

21.Computer graphics

22.Ultrasonics

23.Remote sensing

24.Computer networks

25.Cisco

26.RFID

27. Modelling and simulation

28.Wireless sensor networks

29.Ethics

Graduate courses given :

1. Microprocessor systems 2. Digital system design 3. Adv analog electronics 4. İnformation theory 5. Communication systems 6. RFID applications 7. Wireless network applications 8. Instrumentations 9. Adv computer architecture 10.Image processing techniques

11.Adv image processing applikations

12.Remote sensing techniques

13.Satellite communication.

General Public Computer courses given : 1. Introduction to Computers 2. Computer hardware and maintenance 3. Computer automation 4. Windows 5. Word, Excel 6. Access 7. Power Point 8. Internet 9. Web page and design 10. 3D max 4 11. Maya 12. Computer networks 13. Cisco 14. Ethics 15. RFID 16. Wireless sensor networks 17. TOEFL English

Computer Experience (Hardware): 1. Vax 11/780 2. Silicon Workstation 3. IBM PCs, Pentium 4. Apple, Macintosh 5. BBC, Commodore 6. DSP (Tms 320), (Digital signal processing card) 7. DT2851, DT2858, DT2861 (Image Processor Cards + Their Soft wares) 8. DT2801, Citadel Dc30 (Data Acquisition Cards) 9. Eprom programmers

10. I/O cards 11. Parallel processors. 12. Cisco equipment (Cisco lab) 13. Wireless sensors and networks 14. Cricket wireless sensor devices. 15. ZigBee devices 5121, 5139, 5148 16. RF Code positioning devices Computer Experience (Software): Unix ,Dos, Windows, Internet, Pspice , Orcad, Electronic Work Bench, Logic works , Matlab (all the major tool boxes), Mathematica, Logic Design , Mathcad, Digi Filters, Turbo Assembler, DT Iris (Image Processing), PcCAD, Semper 6 (Image Processing), SAS, Dbase, Fortran, Turbo Basic, Turbo Pascal, C / C++, AutoCad, 3Dmax, Maya, Map info, Web Design, ZigBee, Network simulator (NS)

Microprocessor Experience: 1. Intel: 8080, 8085, 8086, 8088, 8051, 80286, 80386, 80486 , Pentium 2. Motorola: 68hc09, 68hc11, 68000 3. Programmable logic Controls: Omran, Mitsubishi Teaching and Research Areas: 1. Laser Applications 2. Optics and Metrology 3. Remote Sensing & GPS 4. Image processing & computer vision 5. Modelling and simulation 6. Computer graphics & appl. 7. Non-destructive testing (NDT) 8. Computer Interface, Data collection & analysis 9. Digital, Analogue Electronics ,design, research ,development 10. Microprocessors, design ,research development 11. Medical image processing 12. Mechatronics 13. Wireless sensor networks 14. RFID applications 15. Forensic image processing 16. Defence projects (weapons platforms, range finders, simulators etc..) 17. Virtual reality and games (oculus, unity etc..)

References:

1. Prof. Dr. Yusuf Ziya Özcan: YÖK president (past) ,Ambassador to Poland 2. Prof Dr Erkan İbiş : Rektör Ankara University (present) 3. Prof. Dr. Necdet Sezgin : Rektor ,Ankara Univ (past) 4. Prof. Dr. Nusret Aras : Rektor , Ankara Univ (past) 5. Prof. Dr. Sükrü Boylu : Adnan Menderes Universitesi Rector (past) 6. Prof Dr. Serdar Kılıçkaplan : Hitit üniversitesi (past) 7. Prof. Dr. Ömer Gebizlioglu : Vice Rector , Ankara Univ,(past) 8. Prof. Dr. Sadettin Özyazıcı: Vice Rector, Gaziantep Univ (past) 9. Prof Dr. Mehmet R. Tolun : Engineerin dean (past), Aksaray Üniv 10.Prof. Dr. Bala Supramanian: Engineering dean, Lefke Üniv 11. Prof. Dr. Rasim Karabacak: Dean ,Pamukkale Univ 12. Prof. Dr. Mustafa Temiz: chairman, Pamukkale Univ 13. Prof. Dr. Fahrettin Aslan: chairman, Ankara Univ 14. Prof. Dr. Necmettin Tanrıöver: senior lecturer, Computer eng,.Başkent Univ