Upload
rebekah-sandland
View
217
Download
0
Tags:
Embed Size (px)
Citation preview
Personal Protective Equipment
Facilities Management2007
Training Program
At the end of this training you will be required to complete an on-line quiz.
Please review the information in this
program until you feel comfortable with it.
You will also be provided with a Hazard Certification for your job title. Your supervisor will review this with you and you will both sign off on it.
PersonalProtective Equipment
OHSA Requirements
PPE must be provided for you. You must wear the appropriate PPE. PPE must be stored in a sanitary and
reliable condition.
This includes PPE for Eye, Face, Head, and Extremities Protective Clothing Respiratory Devices Protective Shield and Barriers
PPE stands for Personal Protective Equipment. Items such as gloves and ear plugs are PPE. This is the equipment that protects you against hazards in the workplace.
However, it can’t protect you if it isn’t worn correctly or you choose not to wear it.
Definition of PPE
Eye and Face Protection
Eye and face protection must be used when exposed to hazards from: Flying particles Liquid chemicals Acids or caustic liquids Chemical vapors or gases Welding Potentially injurious light radiation (from
welding or lasers)
Eye and Face Protection Must comply with ANSI Z87 specifications
Safety Glasses
Full Face Shield
Safety Goggles
Welding Helmets
Prescription Lenses
If you wear prescription glasses and need eye protection, you must Wear prescription
safety glasses or goggles --or--
Wear eye protection that can be worn over your glasses without disturbing them.
If you need more information on prescription safety glasses, please contact your supervisor.
Prescription Lenses
Select the Eyewear Most Suitedto You and the Task
There are many types of eye protection, to suit the task and
the individual.
It should fit comfortably, without
pinching the nose or causing
pressure on the head. Eyewear should not distort or
block your vision.
Eye and Face Protection
Put on eye protection before exposure to the hazard.
Eye and face protection should be kept clean so your vision is not obstructed.
Clean the lenses or shields regularly with glass cleaner or soapy water.
Head Protection Hard hats must be worn in areas
around or where there is a potential for falling objects.
Hard hats must also be worn where there are low-hanging obstructions.
Helmets designed to reduce electrical shock hazards must be worn when your head is exposed to electricity (Class A & B).
Some tasks require both head & face protection.
Head Protection Care Inspect your hard hats regularly for any
signs of deterioration. You should get a new hard hat at least every two years.
Head protection must comply with the ANSI Z89 standard.
Foot Protection
Metatarsal guards must be worn when you are around objects that may fall or roll.
Shoes with puncture resistant soles must be worn when there is a danger of objects piercing the sole of your work shoe.
Foot Protection
Shoes or boots with electrical protection must be worn when there is a danger of electrical hazards to your feet.
Rubber boots or shoes must be worn when you work in or around water or where there is a slip hazard.
Foot Protection
When working with hazardous chemicals, make sure you wear the appropriate chemical-resistant foot protection in case of splashing or spilling.
This would be impermeable rubber or neoprene boots as shown.
Foot Protection
All DFCM employees doing maintenance activities must wear steel-toed shoes while at work. Contact your supervisor if you do not have steel-toed shoes.
Wear and Care of Foot ProtectionInspect before each use.There should be no cracks
or holes in chemical or waterproof boots.
Should be comfortable.Check soles for excessive
wear.Keep clean and dry. Spray
off mud, dirt or chemicals after each use to keep the footwear in good condition.
Hand Protection
You must wear hand protection when you are exposed to any of the following hazards: Skin absorption of hazardous materials Severe cuts Severe abrasions Punctures Chemical burns Thermal burns/ harmful temperature
extremes
Gloves Gloves are the most important and
common part of hand protection. There are many different types of gloves that protect you from different hazards.
If you are working with chemicals, always check the MSDSto know what type of glove you should wear.
Selecting Hand Protection
Chemical-resistant gloves
Kevlar, metal mesh,cut-resistant gloves
Leather work gloves Extreme temperature
gloves Electrical work gloves
Choose the Correct Glove for the Job
PVC
Coated
Blue latex dipped
Heavy leather palm
Snow glove
Chore glove
Leather driver
Gardening with PVC coating
Kevlar
Full leather palm
Jersey
Nitrite disposable
Welders
Glove Care
Inspect your gloves routinely for holes and cracks. Discard your gloves at any sign of deterioration.
After use, clean and allow to dry
Hearing Protection
If you are exposed to noise levels over 85 decibels, you must wear hearing protection.
85 decibels is approximately the noise made by a large truck.
If you must raise your voice to speak to someone within conversation range, you should wear hearing protection.
Hearing Protection includes
Ear Muffs Ear Bands Ear Plugs
You must wear hearing protection when you work on or around:
Lawn equipment, such as mowers, blowers, etc.
Chillers Boiler Room Fan Rooms
Chemical Protection
Anytime you work with chemicals you must wear appropriate PPE to protect yourself.
Always check the chemical’s Material Safety Data Sheet (MSDS). The MSDS will tell you the PPE you should wear.
Chemical Protective Clothing includes
Gloves Aprons Boots Coveralls Other items may be
required to prevent your contact with chemicals
Hazard Certification Each position within DFCM
has a Hazard Certification written for it.
This certification lets you know the potential hazards you face at work.
It also tells you the PPE you are expected to use when exposed to these hazards.
Check with your supervisor if you have not been given this information.
Please review the Hazard Certification for your position.
If you would like changes made, please contact your supervisor.
If you agree with the assessment, please sign it and return it to your supervisor
Hazard Certification
Congratulations!
You have now completed the Personal Protective Equipment Training.
You can continue to review the information or click here to complete the on-line quiz.