Embed Size (px)
Citation preview
Sheet 1 of 4
Contract No. :
Doc. No. : PHEWMO-PHE5CP-E-DSH-0006
A 13/11/2015 Issued For Review RBW CHA
REV DATE ISSUED DESCRIPTION ORIG CHK'D
REVISION LOG
1 Tag No. : P-103 Client: PHE WMO
2 Manufacturer: Hawker Siddeley (Brook Crompton) Plant Location: CPP
3 No. of Units: One
4 ENVIRONMENTAL CONDITIONS POWER SYSTEM
5 Location: Outdoor, Main Deck System Voltage: 380 V 6 Ambient air temp: Min: 20 °C Max: 33 °C System Frequency: 50 Hz 7 Humidity: 100% Altitude: 92 Meter Neutral Earthing: Solidly Grounded
8 Hazardous area class: Hazardous
9 Atmosphere: Marine, corrosive, salt laden
10 PARTICULARS OF EQUIPMENT UNITS QUANTITY TECHNICAL DATA
11 Basic Data
12 Standard IEC
13 Type Induction Motor with Squirrel Cage Rotor
14 Manufacturer Hawker Siddeley (Brook Crompton)
15 Model D80A-T481224 (WDF-80ME)
16 Frame Size 80
17 Serial Number Not Available
18 Service 1
19 Rated Voltage Volt 380 VAC
20 Rated Frequency Hz 50 Hz
21 Rated Power KW 0.55 KW
22 Duty S1
23 No of Poles/Synchronous Speed 4 Poles / 1400 RPM
24 No of Phases 3
25 Stator Connection Star
26 Insulation Class Class F
27 Temperature Rise °C Class B / 80°C
28 Temperature Class °C T3
29 Enclosure Type Totally Enclosed Fan Ventilated
30 Inggress Protection Classification IP55
31 Incoming From LV MCC ES-102
32 Starting Method Full Voltage, Direct-On-Line (DOL)
33 Performance Characteristic
34 Full Load Current A 1.55 A
35 Efficiency % 75
36 Power Factor pu 0.73
37 Starting Torque pu 1.7
38 Breakdown Torque pu 2.2
39 Starting Current pu 4.5
40 Mechanical Details
41 Mounting Horizontal, Foot Mounted
42 Stator Frame Material Cast Iron
43 Stator Frame Surface with Cooling Fins Yes
44 End Shield Material Cast Iron
45 Fan Cowl Material Sheet Steel
46 Fan Material Ferrous
47 Fan Bi-Directional Yes
48 Colour Light Grey
49 Motor Weight 15 kg
50 Motor Inertia 0.0015 kgm2
51 Drain hole with sealing plug Not Applicable
52 DE Bearing Type Deep Groove Ball
53 NDE Bearing Type Deep Groove Ball
54 Bearing Lubrication Grease
55 Maximum relubrication interval Hours 32000 Hours
56 HAZARDOUS AREA CERTIFICATION
57 Protection Type and Classification EEx e II T3
58 Seconds 16.6 Seconds
59 Certifying Authority Baseefa
60 Certification Standard EN 50014 and EN 50019
61 ACCESSORIES
62 Anti-condensation heater Not Applicable
ELECTRICAL EQUIPMENT DATASHEET FOR DIESEL FUEL TRANSFER PUMP MOTOR P-103
AS-BUILT DRAWINGS & DATASHEET FOR ELECTRICAL AT CPP
094/TS/FEI/14
Diesel Fuel Transfer Pump Motor P-103
Ex e Motor te Time
PT. Bina Rekacipta Utama
Sheet 2 of 4
Contract No. :
Doc. No. : PHEWMO-PHE5CP-E-DSH-0006
A 13/11/2015 Issued For Review RBW CHA
REV DATE ISSUED DESCRIPTION ORIG CHK'D
REVISION LOG
ELECTRICAL EQUIPMENT DATASHEET FOR DIESEL FUEL TRANSFER PUMP MOTOR P-103
AS-BUILT DRAWINGS & DATASHEET FOR ELECTRICAL AT CPP
094/TS/FEI/14
PT. Bina Rekacipta Utama
63 Anti-condensation Heater Power Watt Not Applicable
64 Anti-condensation Heater Voltage Volt Not Applicable
65 TERMINAL BOX (INPUT POWER) 1
66 Ingress Protection of Terminal Boxes IP 55
67 Power Terminal Box Classification (Ex 'd' / 'e' / 'n') EEx e II T3
68 Material Cast Iron
69 Power Terminal Box Location Right Hand Side Mounted
70 Motor Part Number List (See Attached Drawing)
71 1 4 Drive end endshield fixing bolts
72 2 1 Drive end endshield
73 3 1 Drive end oilseal
74 4 1 Preloaded washer
75 5 1 Drive end bearing
76 6 1 Rotor assembly
77 7 1 Stator assembly with or without feet
78 8 1 Earth terminal
79 9 1 Eyebolt
80 10 1 Non-drive end bearing cap (when fitted)
81 11 1 Non-drive end bearing
82 12 1 Bearing circlip
83 13 1 Non-drive end oilseal
84 14 1 Non-drive end endshield
85 15 5 Non-drive end endshield fixing bolts
86 16 1 Fan
87 17 1 Fan circlip
88 18 1 Fan Cover
89 19 1 Foot locking method (when fitted)
90 20 1 Bolt-on feet and bolts
91 21 1 Terminal board and fixing screws
92 22 1 Terminal box, gasket and fixing screws
93 23 1 Teminal box lid, gasket and bolts
94 24 1 Flange endshield
95 25 1 Face endshield
96 26 1 Bolt-on pad
97
98 NOTES:
Sheet 3 of 4
Rev.
PHEWMO-PHE5CP-E-DSH-0006 A
RPT
APP'D CLIENT
REVISION LOG
POWER SYSTEM
10%
5%
TECHNICAL DATA
IEC
D80A-T481224 (WDF-80ME)
380 VAC
50 Hz
0.55 KW
4 Poles / 1400 RPM
3
Class F
Class B / 80°C
Totally Enclosed Fan Ventilated
Full Voltage, Direct-On-Line (DOL)
1.55 A
Horizontal, Foot Mounted
EN 50014 and EN 50019
AS-BUILT DRAWINGS & DATASHEET FOR ELECTRICAL AT CPP
Diesel Fuel Transfer Pump Motor P-103
Sheet 4 of 4
Rev.
PHEWMO-PHE5CP-E-DSH-0006 A
RPT
APP'D CLIENT
REVISION LOG
AS-BUILT DRAWINGS & DATASHEET FOR ELECTRICAL AT CPP
NOTES:
