Upload
others
View
20
Download
0
Embed Size (px)
Citation preview
Mini HeatlessDesiccant
Pneumatech Pride
Pneumatech is proud to offer this range of reliable Mini Heatless
Desiccant dryers. These dryers are a cost effective solution to re-
move moisture and the resultant corrosion from your compressed
air system.
See your local Pneumatech distributor, visit our website at
www.pneumatech.com or give us a call at +1-800-336-2285,
we are here to help.
PHM-5 to PHM-50
Features Benefits Traditional twin tower design Easy to remove and replace desiccant, compact design
Solenoid operated inlet and purge valves No inlet shuttle valve, only positive switching inlet valves
-40°F pressure dewpoint meets most dry air needs, -80°F option available
All pneumatic sequence operation & other voltage options available. Provides application flexibility
Pressure drop 3 PSlD or less Energy Efficient design
cULus 508a Industrial Control Panel and NEMA 4 enclosure Installation in all municipalities
Wall mount or table mount Provides application flexibility
Technical data
Pneumatech
1800 Overview Drive
Rock Hill, SC 29730 USA
1-800-336-2285
www.pneumatech.com
Pneumatech reserves the right to change or revise specifications and product design in connection with any
features of our products. Such changes do not entitle the buyer to corresponding changes, improvements,
additions or replacements for equipment previously sold or shipped.
© 2014 Pneumatech. All rights reserved.
Use of this Motor Challenge logo does not imply DOE endorsement.
ModelNumber* Purge Flow In/Out
Conn. Size [NPT]Dimensions
L x W x H (in)Approx Shipping
Weight (lbs)
PHM-5 0.7 0.25” 16 x 7 x 24 60
PHM-10 1.4 0.50” 22 x 11 x 37 107
PHM-15 2.1 0.50” 22 x 12 x 37 116
PHM-25 3.5 0.50” 22 x 12 x 37 130
PHM-35 4.9 0.50” 22 x 12 x 39 150
PHM-50 7.0 0.50” 22 x 12 x 49 170
*scfm flow at 100°F inlet, 100 psig inlet and 100°F ambient temperature.
H
LW
Unit shown with filters mounted (Optional)
Operating Specifications:
Recommended Installation:
Oil will contaminate the adsorbent material, making it ineffective for water vapor removal. A Pneumatech oil coalescingpre-filter must be installed before the dryer. Additionally, a Pneumatech particulate after-filter is also required for proper particulate and desiccant dust removal after the dryer.
Operating Pressure: 100 PSIG
Operating Temp: 100°F
Max. Inlet Temp: 120°F
Min. Inlet Temp: 70°F
Design Pressure: 150 PSIG
Outlet Dew Point: -40°F
Power Supply: 115-1-60
Electricals: NEMA 4
NEMA Cycle: 10 min.
Desiccant: Activated Alumina