Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
- 1 -
Piercing Punch Precision piercing punches according to DIN 9861 DA
D1 Length L
70 80 100
1.5
1.6
2
2.4
2.5
2.9
3
3.2
3.5
3.7
3.8
3.9
4
4.2
4.8
5
5.2
5.5
6
6.2
6.5
7
7.2
8
8.5
9
10
10.5
11
12
Steel : Cold Working
Hardness : Shank - HRC 62 ± 2
Head - HRC 45 ± 5
Order Example : D1 x L
Ex Stock Other Sizes Available on Request
- 2 -
K 1300.2 - Punch with conical head DA-HWS DIN 9861/1
Available on Request
- 3 -
K 1300.2 - Punch with conical head DA-HWS DIN 9861/1
Available on Request
- 4 -
K 1301.2 - Punch with conical head - stepped CA-HWS DIN 9861/2
Available on Request
- 5 -
K 1310.3 - Punch with conical head D-HSS ISO 6752 DIN 9861/1
Available on Request
- 6 -
K 1310.3 - Punch with conical head D-HSS ISO 6752 DIN 9861/1
Available on Request
- 7 -
K 1310.4 - Punch with conical head D-ASP ISO 6752 DIN 9861/1
Available on Request
- 8 -
K 1311.3/4 - Punch with conical head C-HSS or C-ASP ISO 9181 DIN 9861/2
Available on Request
- 9 -
K 1315 - Punch with tapered head D-HSS
K 1316 - Punch with Tapered head - stepped C-HSS
Available on Request
Available on Request
- 10 -
K 1320.2/3 - Punch with cylindrical head A-HWS or A-HSS ISO 8020
Available on Request
- 11 -
K 1321.2/3 - Punch with cylindrical head - stepped/shaped B-HWS or B-HSS ISO 8020
Available on Request
- 12 -
K 1322.2/3 - Punch with cylindrical head - reduced shank AX-HWS or AX-HSS ISO 8020
Available on Request
- 13 -
K 1323 - Pilot with parabolic tip ISO 8020
K 1324 - Punch with Tapered tip ISO 8020
Available on Request
Available on Request
- 14 -
K 1330.3 - Punch with cylindrical head - with ejector pin E-HSS ISO 8020
Available on Request
- 15 -
K 1331.3 - Punch with cylindrical head with ejector pin - stepped/shaped F-HSS ISO 8020
Available on Request
- 16 -
K 1340 - Matrixes without shoulder - round/shaped ISO 8977
Available on Request
- 17 -
K 1341 - Matrixes with shoulder - round/shaped ISO 8977
Available on Request
- 18 -
K 1342 - Matrixes without shoulder with start bore ISO 8977
K 1343- Matrixes with shoulder with start bore ISO 8977
Available on Request
Available on Request
- 19 -
K 1345 - Matrixes without shoulder automotive standard - round/shaped AUTOMOTIVE STANDARD
Available on Request
- 20 -
K 1346 - Matrixes with shoulder automotive standard - round/shaped AUTOMOTIVE STANDARD
Available on Request
- 21 -
K 1347 - Punch without shoulder automotive standard with start bore AUTOMOTIVE STANDARD
K 1348 - Punch with shoulder automotive standard with start bore AUTOMOTIVE STANDARD
Available on Request
Available on Request
- 22 -
K1350 - Ball-lock punch - light duty AUTOMOTIVE STANDARD
Available on Request
- 23 -
K 1351 - Ball-lock punch - stepped/shaped - light duty
Available on Request
- 24 -
K 1352 - Ball-lock pilot with parabolical tip - light duty
K 1353 - Ball-lock pilots with parabolical tip - light duty
Available on Request
Available on Request
- 25 -
K 1355 - Ball-lock punch with ejector pin - light duty
Available on Request
- 26 -
K 1356 - Ball-lock punch with ejector pin - stepped/shaped - light duty
Available on Request
- 27 -
K 1360 - Ball-lock punch - heavy duty
Available on Request
- 28 -
K 1361 - Ball-lock punch - stepped/shaped - heavy duty
Available on Request
- 29 -
K 1362 - Ball-lock pilots with parabolical tip - heavy duty
K 1363 - Ball-lock pilots with tapered tip - heavy duty
Available on Request
Available on Request
- 30 -
K 1365 - Ball-lock punch with ejector pin - heavy duty
Available on Request
- 31 -
K 1366 - Ball-lock punch with ejector pin - stepped/shaped - heavy duty
Available on Request
- 32 -
K 1370 - Ball-lock matrix - round/shaped
Available on Request
- 33 -
K 1371 - Ball-lock matrixes with start bore
Available on Request
- 34 -
K 1380/1/2 - Retainers for Ball-lock punch - light duty/heavy duty
Available on Request
- 35 -
Piercing Punch Technical Information
- 36 -
Piercing Punch Technical Information
- 37 -
Piercing Punch Technical Information
- 38 -
Information - Cutting Gaps
Cutting gap (mm) at a shearing strength KS of Sheet thickness, normal size
(mm)
Admissible Thickness deviations
(mm)