PIN STYLE BALL STYLE - Fixtureworks - Fixtureworks...Fixtureworks | 33792 Doreka Dr., Fraser MI 48026 | Phone: 586-294-1188 | Fax: 586-294-4843 | 378 Pin type plunger with slotted

S P R I N G & B A L L P L U N G E R S

SPRING &

BALL PLUNGERS

377

PIN STYLE

BALL STYLE

SLOTTED END

HEX END

NON-THREADED

DOUBLEENDED

Manual Clamps 9

TriMax Vises 81

Pneumatic Workholding 121

Supports, Stops & Set Up Accessories 137

Precision Tooling Plates, Blocks & Locators 189

Workholding & Positioning Grippers 231

CMM Inspection Fixturing 305

Quick Release Ball Lock Pins & Fasteners 315

Spring & Ball Plungers 377

Indexing Plungers 393

Adjustable Levers & Handles 407

Knobs 445

Pull Handles 473

Hand Wheels & Crank Handles 483

Machine Accessories 509

Rollers 517

Bumpers 547

Fixtureworks | 33792 Doreka Dr., Fraser MI 48026 | Phone: 586-294-1188 | Fax: 586-294-4843 | www.fixtureworks.net

378

Pin type plunger with slotted end. The steel version has a steel sleeve, pin plunger and spring. The sleeve has a black oxide finish and the pin plunger is hardened. Thestainless version has a stainless sleeve, pin plunger and spring. The stainless sleeves have a natural finish and the pin plunger is hardened.

Light End Force INCH S P R I N G F O R C E Part # Part # F1 F2Steel Stainless D D1 L H N Initial Lbs. Final Lbs.03020-1AG 03025-1AG 8-36 .071 (1.8mm) .35 .06 .02 .45 1.57 03020-1AE 03025-1AE 8-32 .071 (1.8mm) .35 .06 .02 .67 2.25 03020-1A1 03025-1A1 10-32 .094 (2.4mm) .47 .08 .03 .67 2.25 03020-1AJ 03025-1AJ 1/4-28 .106 (2.7mm) .55 .08 .04 .67 2.02 03020-1A2 03025-1A2 1/4-20 .106 (2.7mm) .55 .08 .04 .90 2.25 03020-1A3 03025-1A3 5/16-18 .157 (4.0mm) .63 .08 .05 1.57 3.37 03020-1A4 03025-1A4 3/8-16 .177 (4.5mm) .75 .10 .06 2.02 3.60 03020-1A5 03025-1A5 1/2-13 .236 (6.0mm) .87 .14 .08 3.15 5.84 03020-1A6 03025-1A6 5/8-11 .335 (8.5mm) .94 .18 .10 4.95 11.24

METRIC S P R I N G F O R C EPart # Part # D D1 L H N F1 F2Steel Stainless mm mm mm mm mm Initial Lbs. Final Lbs.03020-104 03025-104 M4 1.8 9 1.5 0.6 .67 2.2503020-105 03025-105 M5 2.4 12 2 0.8 .67 2.2503020-106 03025-106 M6 2.7 14 2 1 .90 2.2503020-108 03025-108 M8 4 16 2 1.2 1.57 3.3703020-110 03025-110 M10 4.5 19 2.5 1.6 2.02 3.6003020-112 03025-112 M12 6 22 3.5 2 3.15 5.8403020-116 03025-116 M16 8.5 24 4.5 2.5 4.95 11.2403020-120 03025-120 M20 10 30 6.5 2.5 6.74 13.49

Standard End ForceINCH S P R I N G F O R C E Part # Part # F1 F2Steel Stainless D D1 L H N Initial Lbs. Final Lbs.03020-AG 03025-AG 8-36 .071 (1.8mm) .35 .06 .02 1.35 4.50 03020-AE 03025-AE 8-32 .071 (1.8mm) .35 .06 .02 1.35 4.50 03020-A1 03025-A1 10-32 .094 (2.4mm) .47 .08 .03 1.35 4.50 03020-AJ 03025-AJ 1/4-28 .106 (2.7mm) .55 .08 .04 1.57 4.50 03020-A2 03025-A2 1/4-20 .106 (2.7mm) .55 .08 .04 1.57 4.50 03020-A3 03025-A3 5/16-18 .157 (4.0mm) .63 .08 .05 3.37 6.74 03020-A4 03025-A4 3/8-16 .177 (4.5mm) .75 .10 .06 4.50 7.87 03020-A5 03025-A5 1/2-13 .236 (6.0mm) .87 .14 .08 6.74 12.36 03020-A6 03025-A6 5/8-11 .335 (8.5mm) .94 .18 .10 10.12 22.48

METRIC S P R I N G F O R C EPart # Part # D D1 L H N F1 F2Steel Stainless mm mm mm mm mm Initial Lbs. Final Lbs.03020-04 03025-04 M4 1.8 9 1.5 0.6 1.35 4.5003020-05 03025-05 M5 2.4 12 2 0.8 1.35 4.5003020-06 03025-06 M6 2.7 14 2 1 1.57 4.5003020-08 03025-08 M8 4 16 2 1.2 3.37 6.7403020-10 03025-10 M10 4.5 19 2.5 1.6 4.50 7.8703020-12 03025-12 M12 6 22 3.5 2 6.74 12.3603020-16 03025-16 M16 8.5 24 4.5 2.5 10.12 22.4803020-20 03025-20 M20 10 30 6.5 2.5 13.49 26.98

SPRING PLUNGERS

Pin Type | Slotted End | Steel and Stainless Steel | Inch and Metric


379

SPRING PLUNGERS

Pin Type with Nylon Locking | Slotted End | Steel and Stainless Steel | Inch and Metric

Applies to plungerswhere D =M4, M5 & M6, 8-36, 8-32, 10-32,1/4-28 & 1/4-20*L2 = Approx. two thread turns.

* *

Pin type plunger with slotted end. The Long-Lok nylon locking system prevents loosening from impact or vibrations. The steel version has a steel sleeve, spring and pinplunger. The sleeve has a black oxide finish and the pin plunger is hardened. The stainless version has a stainless sleeve, spring and pin plunger. The stainless sleeveshave a natural finish and the pin plunger is hardened.

Light End Force INCH S P R I N G F O R C E Part # Part # +/-.02 F1 F2Steel Stainless D D1 L L1 H N Initial Lbs. Final Lbs.03021-1AG 03026-1AG 8-36 .071 (1.8mm) .35 .20 .06 .02 .45 1.57 03021-1AE 03026-1AE 8-32 .071 (1.8mm) .35 .20 .06 .02 .67 2.25 03021-1A1 03026-1A1 10-32 .094 (2.4mm) .47 .24 .08 .03 .67 2.25 03021-1AJ 03026-1AJ 1/4-28 .106 (2.7mm) .55 .28 .08 .04 .67 2.02 03021-1A2 03026-1A2 1/4-20 .106 (2.7mm) .55 .28 .08 .04 .90 2.25 03021-1A3 03026-1A3 5/16-18 .157 (4.0mm) .63 .31 .08 .05 1.57 3.37 03021-1A4 03026-1A4 3/8-16 .177 (4.5mm) .75 .35 .10 .06 2.02 3.60 03021-1A5 03026-1A5 1/2-13 .236 (6.0mm) .87 .39 .14 .08 3.15 5.84 03021-1A6 03026-1A6 5/8-11 .335 (8.5mm) .94 .55 .18 .10 4.95 11.24

METRIC +/-0.5 S P R I N G F O R C EPart # Part # D D1 L L1 H N F1 F2Steel Stainless mm mm mm mm mm mm Initial Lbs. Final Lbs.03021-104 03026-104 M4 1.8 9 5 1.5 0.6 .67 2.2503021-105 03026-105 M5 2.4 12 6 2 0.8 .67 2.2503021-106 03026-106 M6 2.7 14 7 2 1 .90 2.2503021-108 03026-108 M8 4 16 8 2 1.2 1.57 3.3703021-110 03026-110 M10 4.5 19 9 2.5 1.6 2.02 3.6003021-112 03026-112 M12 6 22 10 3.5 2 3.15 5.8403021-116 03026-116 M16 8.5 24 14 4.5 2.5 4.95 11.24

Standard End Force INCH S P R I N G F O R C E Part # Part # +/-.02 F1 F2Steel Stainless D D1 L L1 H N Initial Lbs. Final Lbs.03021-AG 03026-AG 8-36 .071 (1.8mm) .35 .20 .06 .02 1.35 4.50 03021-AE 03026-AE 8-32 .071 (1.8mm) .35 .20 .06 .02 1.35 4.50 03021-A1 03026-A1 10-32 .094 (2.4mm) .47 .24 .08 .03 1.35 4.50 03021-AJ 03026-AJ 1/4-28 .106 (2.7mm) .55 .28 .08 .04 1.57 4.50 03021-A2 03026-A2 1/4-20 .106 (2.7mm) .55 .28 .08 .04 1.57 4.50 03021-A3 03026-A3 5/16-18 .157 (4.0mm) .63 .31 .08 .05 3.37 6.74 03021-A4 03026-A4 3/8-16 .177 (4.5mm) .75 .35 .10 .06 4.50 7.87 03021-A5 03026-A5 1/2-13 .236 (6.0mm) .87 .39 .14 .08 6.74 12.36 03021-A6 03026-A6 5/8-11 .335 (8.5mm) .94 .55 .18 .10 10.12 22.48

METRIC +/-0.5 S P R I N G F O R C EPart # Part # D D1 L L1 H N F1 F2Steel Stainless mm mm mm mm mm mm Initial Lbs. Final Lbs.03021-04 03026-04 M4 1.8 9 5 1.5 0.6 1.35 4.5003021-05 03026-05 M5 2.4 12 6 2 0.8 1.35 4.5003021-06 03026-06 M6 2.7 14 7 2 1 1.57 4.5003021-08 03026-08 M8 4 16 8 2 1.2 3.37 6.7403021-10 03026-10 M10 4.5 19 9 2.5 1.6 4.50 7.8703021-12 03026-12 M12 6 22 10 3.5 2 6.74 12.3603021-16 03026-16 M16 8.5 24 14 4.5 2.5 10.12 22.48


380

SPRING PLUNGERS

Pin Type | Hex End | Top Slots | Steel and Stainless Steel | Inch

grub screw glued inAssembly Tool

Pin type plunger with hex end. The steel version has a steel sleeve, pin plunger and spring. The sleeve has a black oxide finish and the pin plunger is hardened. Thestainless version has a stainless sleeve, pin plunger and spring. The stainless sleeves have a natural finish and the pin plunger is hardened. Slots on top end allow forblind hole or top side fastening with assembly tool. Assembly tool must be ordered separately.

Light End Force S P R I N G F O R C E Part # F1 F2 Assembly Steel D D1 L H T T1 N S Initial Lbs. Final Lbs. Tool 03040-1AG 8-36 .059 (1.5mm) .59 .06 .08 .02 .02 .050 .45 1.57 03040-904 03040-1AE 8-32 .059 (1.5mm) .59 .06 .08 .02 .02 .050 .45 1.57 03040-904 03040-1A1 10-32 .094 (2.4mm) .71 .09 .08 .03 .03 1/16 .67 2.25 03040-905 03040-1AJ 1/4-28 .106 (2.7mm) .79 .10 .10 .04 .04 5/64 .67 2.02 03040-906 03040-1A2 1/4-20 .106 (2.7mm) .79 .10 .10 .04 .04 5/64 .67 2.02 03040-906 03040-1A3 5/16-18 .138 (3.5mm) .87 .12 .12 .06 .05 3/32 .90 3.60 03040-908 03040-1A4 3/8-16 .157 (4.0mm) .87 .12 .14 .06 .06 1/8 .90 3.60 03040-910 03040-1A5 1/2-13 .236 (6.0mm) 1.10 .16 .20 .08 .08 5/32 1.12 6.07 03040-912 03040-1A6 5/8-11 .295 (7.5mm) 1.26 .20 .24 .10 .10 3/16 4.50 10.12 03040-916

Standard End Force S P R I N G F O R C E Part # Part # F1* F2* AssemblySteel Stainless D D1 L H T T1 N S Initial Lbs. Final Lbs. Tool03040-AD — 6-32 .039 (1.0mm) .39 .06 .06 .04 .02 .035 .67 .67 03040-903 03040-AG 03055-AG 8-36 .059 (1.5mm) .59 .06 .08 .02 .02 .050 1.12 3.60 03040-904 03040-AE 03055-AE 8-32 .059 (1.5mm) .59 .06 .08 .02 .02 .050 1.12 3.60 03040-904 03040-A1 03055-A1 10-32 .094 (2.4mm) .71 .09 .08 .03 .03 1/16 1.35 4.50 03040-905 03040-AJ 03055-AJ 1/4-28 .106 (2.7mm) .79 .10 .10 .04 .04 5/64 1.57 4.50 03040-906 03040-A2 03055-A2 1/4-20 .106 (2.7mm) .79 .10 .10 .04 .04 5/64 1.57 4.50 03040-906 03040-A3 03055-A3 5/16-18 .138 (3.5mm) .87 .12 .12 .06 .05 3/32 2.02 7.87 03040-908 03040-A4 03055-A4 3/8-16 .157 (4.0mm) .87 .12 .14 .06 .06 1/8 2.02 7.87 03040-910 03040-A5 03055-A5 1/2-13 .236 (6.0mm) 1.10 .16 .20 .08 .08 5/32 2.25 12.36 03040-912 03040-A6 03055-A6 5/8-11 .295 (7.5mm) 1.26 .20 .24 .10 .10 3/16 10.12 22.48 03040-916

* Spring Forces may be slightly lower for the stainless steel versions.

Heavy End Force S P R I N G F O R C E Part # F1 F2 Assembly Steel D D1 L H T T1 N S Initial Lbs. Final Lbs. Tool 03040-2A1 10-32 .094 (2.4mm) .71 .09 .08 .03 .03 1/16 2.47 6.52 03040-905 03040-2AJ 1/4-28 .106 (2.7mm) .79 .10 .10 .04 .04 5/64 3.15 8.32 03040-906 03040-2A2 1/4-20 .106 (2.7mm) .79 .10 .10 .04 .04 5/64 3.15 8.32 03040-906 03040-2A3 5/16-18 .138 (3.5mm) .87 .12 .12 .06 .05 3/32 4.95 14.61 03040-908 03040-2A4 3/8-16 .157 (4.0mm) .87 .12 .14 .06 .06 1/8 4.27 15.74 03040-910 03040-2A5 1/2-13 .236 (6.0mm) 1.10 .16 .20 .08 .08 5/32 5.62 19.11 03040-912 03040-2A6 5/8-11 .295 (7.5mm) 1.26 .20 .24 .10 .10 3/16 13.49 33.72 03040-916


381

SPRING PLUNGERS

Pin Type | Hex End | Top Slots | Steel and Stainless Steel | Metric


Pin type plunger with hex end. The steel version has a steel sleeve, pin plunger and spring. The sleeve has a black oxide finish and the pin plunger is hardened. Thestainless version has a stainless sleeve, pin plunger and spring. The stainless sleeves have a natural finish and the pin plunger is hardened. Slots on top end allow forblind hole or top side fastening with assembly tool. Assembly tool must be ordered separately.

Light End Force S P R I N G F O R C E Part # D D1 L H T T1 N S F1 F2 Assembly Steel mm mm mm mm mm mm mm mm Initial Lbs. Final Lbs. Tool 03040-104 M4 1.5 15 1.5 2 0.6 0.6 1.3 .45 1.57 03040-904 03040-105 M5 2.4 18 2.3 2 0.8 0.8 1.5 .67 2.25 03040-905 03040-106 M6 2.7 20 2.5 2.5 1 1 2 .67 2.02 03040-906 03040-108 M8 3.5 22 3 3 1.4 1.2 2.5 .90 3.60 03040-908 03040-110 M10 4 22 3 3.5 1.4 1.6 3 .90 3.60 03040-910 03040-112 M12 6 28 4 5 2 2 4 1.12 6.07 03040-912 03040-116 M16 7.5 32 5 6 2.5 2.5 5 4.50 10.12 03040-916

Standard End Force S P R I N G F O R C E Part # Part # D D1 L H T T1 N S F1* F2* AssemblySteel Stainless mm mm mm mm mm mm mm mm Initial Lbs. Final Lbs. Tool03040-03 – M3 1 10 1.5 1.5 1 0.4 0.7 .11 .67 03040-90303040-04 03055-04 M4 1.5 15 1.5 2 0.6 0.6 1.3 1.12 3.60 03040-90403040-05 03055-05 M5 2.4 18 2.3 2 0.8 0.8 1.5 1.35 4.50 03040-90503040-06 03055-06 M6 2.7 20 2.5 2.5 1 1 2 1.57 4.50 03040-90603040-08 03055-08 M8 3.5 22 3 3 1.4 1.2 2.5 2.02 7.87 03040-90803040-10 03055-10 M10 4 22 3 3.5 1.4 1.6 3 2.02 7.87 03040-91003040-12 03055-12 M12 6 28 4 5 2 2 4 2.25 12.36 03040-91203040-16 03055-16 M16 7.5 32 5 6 2.5 2.5 5 10.12 22.48 03040-91603040-20 – M20 10 40 7 8 3 2.5 6 13.49 26.98 –03040-24 – M24 12 52 10 10 3 2.5 8 17.98 35.97 –


Heavy End Force S P R I N G F O R C E Part # D D1 L H T T1 N S F1 F2 Assembly Steel mm mm mm mm mm mm mm mm Initial Lbs. Final Lbs. Tool 03040-205 M5 2.4 18 2.3 2 0.8 0.8 1.5 2.47 6.52 03040-905 03040-206 M6 2.7 20 2.5 2.5 1 1 2 3.15 8.32 03040-906 03040-208 M8 3.5 22 3 3 1.4 1.2 2.5 4.95 14.61 03040-908 03040-210 M10 4 22 3 3.5 1.4 1.6 3 4.27 15.74 03040-910 03040-212 M12 6 28 4 5 2 2 4 5.62 19.11 03040-912 03040-216 M16 7.5 32 5 6 2.5 2.5 5 13.49 33.72 03040-916 03040-220 M20 10 40 7 8 3 2.5 6 16.86 42.71 – 03040-224 M24 12 52 10 10 3 2.5 8 21.36 53.95 –


382


SPRING PLUNGERS

Pin Type with Nylon Locking | Hex End | Top Slots | Steel and Stainless Steel | Inch

Grub Screw Glued In *L2 = Approx. two thread turns.

*

Assembly Tool

Pin type plunger with hex end. The Long-Lok nylon locking system prevents loosening from impact or vibrations. The steel version has a steel sleeve, pin plunger andspring. The sleeve has a black oxide finish and the pin plunger is hardened. The stainless version has a stainless sleeve, pin plunger and spring. The stainless sleeveshave a natural finish and the pin plunger is hardened. Slots on top end allow for blind hole or top side fastening with assembly tool. Assembly tool must be orderedseparately.

Light End Force S P R I N G F O R C E Part # +/-.02 F1 F2 Assembly Steel D D1 L L1 H T T1 N S Initial Lbs. Final Lbs. Tool 03041-1A1 10-32 .094 (2.4mm) .71 .28 .09 .08 .03 .03 1/16 .67 2.25 03040-905 03041-1AJ 1/4-28 .106 (2.7mm) .79 .28 .10 .10 .04 .04 5/64 .67 2.02 03040-906 03041-1A2 1/4-20 .106 (2.7mm) .79 .28 .10 .10 .04 .04 5/64 .67 2.02 03040-906 03041-1A3 5/16-18 .138 (3.5mm) .87 .31 .12 .12 .06 .05 3/32 .90 3.60 03040-908 03041-1A4 3/8-16 .157 (4.0mm) .87 .35 .12 .14 .06 .06 1/8 .90 3.60 03040-910 03041-1A5 1/2-13 .236 (6.0mm) 1.10 .39 .16 .20 .08 .08 5/32 1.12 6.07 03040-912 03041-1A6 5/8-11 .295 (7.5mm) 1.26 .55 .20 .24 .10 .10 3/16 4.50 10.12 03040-916

Standard End Force S P R I N G F O R C E Part # Part # +/-.02 F1* F2* AssemblySteel Stainless D D1 L L1 H T T1 N S Initial Lbs. Final Lbs. Tool03041-A1 03056-A1 10-32 .094 (2.4mm) .71 .28 .09 .08 .03 .03 1/16 1.35 4.50 03040-905 03041-AJ 03056-AJ 1/4-28 .106 (2.7mm) .79 .28 .10 .10 .04 .04 5/64 1.57 4.50 03040-906 03041-A2 03056-A2 1/4-20 .106 (2.7mm) .79 .28 .10 .10 .04 .04 5/64 1.57 4.50 03040-906 03041-A3 03056-A3 5/16-18 .138 (3.5mm) .87 .31 .12 .12 .06 .05 3/32 2.02 7.87 03040-908 03041-A4 03056-A4 3/8-16 .157 (4.0mm) .87 .35 .12 .14 .06 .06 1/8 2.02 7.87 03040-910 03041-A5 03056-A5 1/2-13 .236 (6.0mm) 1.10 .39 .16 .20 .08 .08 5/32 2.25 12.36 03040-912 03041-A6 03056-A6 5/8-11 .295 (7.5mm) 1.26 .55 .20 .24 .10 .10 3/16 10.12 22.48 03040-916


Heavy End Force S P R I N G F O R C E Part # +/-.02 F1 F2 Assembly Steel D D1 L L1 H T T1 N S Initial Lbs. Final Lbs. Tool 03041-2A1 10-32 .094 (2.4mm) .71 .28 .09 .08 .03 .03 1/16 2.47 6.52 03040-905 03041-2AJ 1/4-28 .106 (2.7mm) .79 .28 .10 .10 .04 .04 5/64 3.15 8.32 03040-906 03041-2A2 1/4-20 .106 (2.7mm) .79 .28 .10 .10 .04 .04 5/64 3.15 8.32 03040-906 03041-2A3 5/16-18 .138 (3.5mm) .87 .31 .12 .12 .06 .05 3/32 4.95 14.61 03040-908 03041-2A4 3/8-16 .157 (4.0mm) .87 .35 .12 .14 .06 .06 1/8 4.27 15.74 03040-910 03041-2A5 1/2-13 .236 (6.0mm) 1.10 .39 .16 .20 .08 .08 5/32 5.62 19.11 03040-912 03041-2A6 5/8-11 .295 (7.5mm) 1.26 .55 .20 .24 .10 .10 3/16 13.49 34.00 03040-916


383


Pin type plunger with hex end. The Long-Lok nylon locking system prevents loosening from impact or vibrations. The steel version has a steel sleeve, pin plunger andspring. The sleeve has a black oxide finish and the pin plunger is hardened. The stainless version has a stainless sleeve, pin plunger and spring. The stainless sleeveshave a natural finish and the pin plunger is hardened. Slots on top end allow for blind hole or top side fastening with assembly tool. Assembly tool must be orderedseparately.

Light End Force +/-0.5 S P R I N G F O R C E Part # D D1 L L1 H T T1 N S F1 F2 Assembly Steel mm mm mm mm mm mm mm mm mm Initial Lbs. Final Lbs. Tool 03041-105 M5 2.4 18 7 2.3 2 0.8 0.8 1.5 .67 2.25 03040-905 03041-106 M6 2.7 20 7 2.5 2.5 1 1 2 .67 2.02 03040-906 03041-108 M8 3.5 22 8 3 3 1.4 1.2 2.5 .90 3.60 03040-908 03041-110 M10 4 22 9 3 3.5 1.4 1.6 3 .90 3.60 03040-910 03041-112 M12 6 28 10 4 5 2 2 4 1.12 6.07 03040-912 03041-116 M16 7.5 32 14 5 6 2.5 2.5 5 4.50 10.12 03040-916

Standard End Force +/-0.5 S P R I N G F O R C E Part # Part # D D1 L L1 H T T1 N S F1* F2* AssemblySteel Stainless mm mm mm mm mm mm mm mm mm Initial Lbs. Final Lbs. Tool03041-05 03056-05 M5 2.4 18 7 2.3 2 0.8 0.8 1.5 1.35 4.50 03040-90503041-06 03056-06 M6 2.7 20 7 2.5 2.5 1 1 2 1.57 4.50 03040-90603041-08 03056-08 M8 3.5 22 8 3 3 1.4 1.2 2.5 2.02 7.87 03040-90803041-10 03056-10 M10 4 22 9 3 3.5 1.4 1.6 3 2.02 7.87 03040-91003041-12 03056-12 M12 6 28 10 4 5 2 2 4 2.25 12.36 03040-91203041-16 03056-16 M16 7.5 32 14 5 6 2.5 2.5 5 10.12 22.48 03040-916


Heavy End Force +/-0.5 S P R I N G F O R C E Part # D D1 L L1 H T T1 N S F1 F2 Assembly Steel mm mm mm mm mm mm mm mm mm Initial Lbs. Final Lbs. Tool 03041-205 M5 2.4 18 7 2.3 2 0.8 0.8 1.5 2.47 6.52 03040-905 03041-206 M6 2.7 20 7 2.5 2.5 1 1 2 3.15 8.32 03040-906 03041-208 M8 3.5 22 8 3 3 1.4 1.2 2.5 4.95 14.61 03040-908 03041-210 M10 4 22 9 3 3.5 1.4 1.6 3 4.27 15.47 03040-910 03041-212 M12 6 28 10 4 5 2 2 4 5.62 19.11 03040-912 03041-216 M16 7.5 32 14 5 6 2.5 2.5 5 13.49 33.72 03040-916

SPRING PLUNGERS

Pin Type with Nylon Locking | Hex End | Top Slots | Steel and Stainless Steel | Metric

Grub Screw Glued In *L2 = Approx. two thread turns.

*

Assembly Tool


384


Pin type plunger with hex end. The steel version has a steel sleeve and spring with a plastic pin plunger. The sleeve has a black oxide finish. The stainless version has astainless sleeve and spring with a plastic pin plunger. The stainless sleeves have a natural finish. Slots on top end allow for blind hole or top side fastening withassembly tool. Assembly tool must be ordered separately.

Light End ForceINCH S P R I N G F O R C E Part # F1 F2 Assembly Steel D D1 L H T T1 N S Initial Lbs. Final Lbs. Tool 03050-1AG 8-36 .059 (1.5mm) .59 .06 .08 .02 .02 .050 .45 1.57 03040-904 03050-1AE 8-32 .059 (1.5mm) .59 .06 .08 .02 .02 .050 .45 1.57 03040-904 03050-1A1 10-32 .094 (2.4mm) .71 .09 .08 .03 .03 1/16 .67 2.25 03040-905 03050-1AJ 1/4-28 .106 (2.7mm) .79 .10 .10 .04 .04 5/64 .67 2.02 03040-906 03050-1A2 1/4-20 .106 (2.7mm) .79 .10 .10 .04 .04 5/64 .67 2.02 03040-906 03050-1A3 5/16-18 .138 (3.5mm) .87 .12 .12 .06 .05 3/32 .90 3.60 03040-908 03050-1A4 3/8-16 .157 (4.0mm) .87 .12 .14 .06 .06 1/8 .90 3.60 03040-910 03050-1A5 1/2-13 .236 (6.0mm) 1.10 .16 .20 .08 .08 5/32 1.12 6.07 03040-912 03050-1A6 5/8-11 .295 (7.5mm) 1.26 .20 .24 .10 .10 3/16 4.50 10.12 03040-916

METRIC S P R I N G F O R C E Part # D D1 L H T T1 N S F1 F2 Assembly Steel mm mm mm mm mm mm mm mm Initial Lbs. Final Lbs. Tool 03050-104 M4 1.5 15 1.5 2 0.6 0.6 1.3 .45 1.57 03040-904 03050-105 M5 2.4 18 2.3 2 0.8 0.8 1.5 .67 2.25 03040-905 03050-106 M6 2.7 20 2.5 2.5 1 1 2 .67 2.02 03040-906 03050-108 M8 3.5 22 3 3 1.4 1.2 2.5 .90 3.60 03040-908 03050-110 M10 4 22 3 3.5 1.4 1.6 3 .90 3.60 03040-910 03050-112 M12 6 28 4 5 2 2 4 1.12 6.07 03040-912 03050-116 M16 7.5 32 5 6 2.5 2.5 5 4.50 10.12 03040-916

Standard End ForceINCH S P R I N G F O R C E Part # Part # F1* F2* AssemblySteel Stainless D D1 L H T T1 N S Initial Lbs. Final Lbs. Tool 03050-AG 03058-AG 8-36 .059 (1.5mm) .59 .06 .08 .02 .02 .050 1.12 3.60 03040-904 03050-AE 03058-AE 8-32 .059 (1.5mm) .59 .06 .08 .02 .02 .050 1.12 3.60 03040-904 03050-A1 03058-A1 10-32 .094 (2.4mm) .71 .09 .08 .03 .03 1/16 1.35 4.50 03040-905 03050-AJ 03058-AJ 1/4-28 .106 (2.7mm) .79 .10 .10 .04 .04 5/64 1.57 4.50 03040-906 03050-A2 03058-A2 1/4-20 .106 (2.7mm) .79 .10 .10 .04 .04 5/64 1.57 4.50 03040-906 03050-A3 03058-A3 5/16-18 .138 (3.5mm) .87 .12 .12 .06 .05 3/32 2.02 7.87 03040-908 03050-A4 03058-A4 3/8-16 .157 (4.0mm) .87 .12 .14 .06 .06 1/8 2.02 7.87 03040-910 03050-A5 03058-A5 1/2-13 .236 (6.0mm) 1.10 .16 .20 .08 .08 5/32 2.25 12.36 03040-912 03050-A6 03058-A6 5/8-11 .295 (7.5mm) 1.26 .20 .24 .10 .10 3/16 10.12 22.48 03040-916


METRIC S P R I N G F O R C E Part # Part # D D1 L H T T1 N S F1* F2* AssemblySteel Stainless mm mm mm mm mm mm mm mm Initial Lbs. Final Lbs. Tool03050-04 03058-04 M4 1.5 15 1.5 2 0.6 0.6 1.3 1.12 3.60 03040-90403050-05 03058-05 M5 2.4 18 2.3 2 0.8 0.8 1.5 1.35 4.50 03040-90503050-06 03058-06 M6 2.7 20 2.5 2.5 1 1 2 1.57 4.50 03040-90603050-08 03058-08 M8 3.5 22 3 3 1.4 1.2 2.5 2.02 7.87 03040-90803050-10 03058-10 M10 4 22 3 3.5 1.4 1.6 3 2.02 7.87 03040-91003050-12 03058-12 M12 6 28 4 5 2 2 4 2.25 12.36 03040-91203050-16 03058-16 M16 7.5 32 5 6 2.5 2.5 5 10.12 22.48 03040-916


SPRING PLUNGERS

Pin Type | Hex End | Top Slots | Steel and Stainless Steel with PlasticPlunger | Inch and Metric



385


SPRING PLUNGERS

PinType with Nylon Locking | Hex End | Top Slots |Steel and Stainless Steel with Plastic Plunger | Inch and Metric

*L2 = Approx. two thread turns.

*

Grub Screw Glued InAssembly Tool

Pin type plunger with hex end. The Long-Lok nylon locking system prevents loosening from impact or vibrations. The steel version has a steel sleeve and spring with aplastic pin plunger. The sleeve has a black oxide finish. The stainless version has a stainless sleeve and spring with a plastic pin plunger. The stainless sleeves have anatural finish and the pin plunger is hardened. Slots on top end allow for blind hole or top side fastening with assembly tool. Assembly tool must be ordered separately.

Light End Force INCH S P R I N G F O R C E Part # +/-.02 F1 F2 Assembly Steel D D1 L L1 H T T1 N S Initial Lbs. Final Lbs. Tool 03051-1A1 10-32 .094 (2.4mm) .71 .28 .09 .08 .03 .03 1/16 .67 2.25 03040-905 03051-1AJ 1/4-28 .106 (2.7mm) .79 .28 .10 .10 .04 .04 5/64 .67 2.02 03040-906 03051-1A2 1/4-20 .106 (2.7mm) .79 .28 .10 .10 .04 .04 5/64 .67 2.02 03040-906 03051-1A3 5/16-18 .138 (3.5mm) .87 .31 .12 .12 .06 .05 3/32 .90 3.60 03040-908 03051-1A4 3/8-16 .157 (4.0mm) .87 .35 .12 .14 .06 .06 1/8 .90 3.60 03040-910 03051-1A5 1/2-13 .236 (6.0mm) 1.10 .39 .16 .20 .08 .08 5/32 1.12 6.07 03040-912 03051-1A6 5/8-11 .295 (7.5mm) 1.26 .55 .20 .24 .10 .10 3/16 4.50 10.12 03040-916

METRIC +/-0.5 S P R I N G F O R C E Part # D D1 L L1 H T T1 N S F1 F2 Assembly Steel mm mm mm mm mm mm mm mm mm Initial Lbs. Final Lbs. Tool 03051-105 M5 2.4 18 7 2.3 2 0.8 0.8 1.5 .67 2.25 03040-905 03051-106 M6 2.7 20 7 2.5 2.5 1 1 2 .67 2.02 03040-906 03051-108 M8 3.5 22 8 3 3 1.4 1.2 2.5 .90 3.60 03040-908 03051-110 M10 4 22 9 3 3.5 1.4 1.6 3 .90 3.60 03040-910 03051-112 M12 6 28 10 4 5 2 2 4 1.12 6.07 03040-912 03051-116 M16 7.5 32 14 5 6 2.5 2.5 5 4.50 10.12 03040-916

Standard End Force INCH S P R I N G F O R C E Part # Part # +/-.02 F1* F2* AssemblySteel Stainless D D1 L L1 H T T1 N S Initial Lbs. Final Lbs. Tool03051-A1 03059-A1 10-32 .094 (2.4mm) .71 .28 .09 .08 .03 .03 1/16 1.35 4.50 03040-905 03051-AJ 03059-AJ 1/4-28 .106 (2.7mm) .79 .28 .10 .10 .04 .04 5/64 1.57 4.50 03040-906 03051-A2 03059-A2 1/4-20 .106 (2.7mm) .79 .28 .10 .10 .04 .04 5/64 1.57 4.50 03040-906 03051-A3 03059-A3 5/16-18 .138 (3.5mm) .87 .31 .12 .12 .06 .05 3/32 2.02 7.87 03040-908 03051-A4 03059-A4 3/8-16 .157 (4.0mm) .87 .35 .12 .14 .06 .06 1/8 2.02 7.87 03040-910 03051-A5 03059-A5 1/2-13 .236 (6.0mm) 1.10 .39 .16 .20 .08 .08 5/32 2.25 12.36 03040-912 03051-A6 03059-A6 5/8-11 .295 (7.5mm) 1.26 .55 .20 .24 .10 .10 3/16 10.12 22.48 03040-916


METRIC +/-0.5 S P R I N G F O R C E Part # Part # D D1 L L1 H T T1 N S F1* F2* AssemblySteel Stainless mm mm mm mm mm mm mm mm mm Initial Lbs. Final Lbs. Tool03051-05 03059-05 M5 2.4 18 7 2.3 2 0.8 0.8 1.5 1.35 4.50 03040-90503051-06 03059-06 M6 2.7 20 7 2.5 2.5 1 1 2 1.57 4.50 03040-90603051-08 03059-08 M8 3.5 22 8 3 3 1.4 1.2 2.5 2.02 7.87 03040-90803051-10 03059-10 M10 4 22 9 3 3.5 1.4 1.6 3 2.02 7.87 03040-91003051-12 03059-12 M12 6 28 10 4 5 2 2 4 2.25 12.36 03040-91203051-16 03059-16 M16 7.5 32 14 5 6 2.5 2.5 5 10.12 22.48 03040-916



386


Ball type plunger with slotted end. The steel version has a steel sleeve, ball and spring. The sleeve has a black oxide finish and the ball is hardened. The stainlessversion has a stainless sleeve, ball and spring. The stainless sleeves have a natural finish and the ball is hardened.

Standard End Force INCH S P R I N G F O R C E Part # Part # F1 F2Steel Stainless D D1 L H N Initial Lbs. Final Lbs.03000-AD 03010-AD 6-32 .059 (1.5mm) .28 .02 .02 .34 .67 03000-AG 03010-AG 8-36 .098 (2.5mm) .35 .03 .02 .90 2.25 03000-AE 03010-AE 8-32 .098 (2.5mm) .35 .03 .02 .90 2.25 03000-A1 03010-A1 10-32 .118 (3.0mm) .47 .04 .03 1.35 2.47 03000-AJ 03010-AJ 1/4-28 .138 (3.5mm) .55 .04 .04 2.02 2.92 03000-A2 03010-A2 1/4-20 .138 (3.5mm) .55 .04 .04 2.02 2.92 03000-A3 03010-A3 5/16-18 .197 (5.0mm) .63 .06 .05 3.37 6.74 03000-A4 03010-A4 3/8-16 .236 (6.0mm) .75 .08 .06 4.50 7.78 03000-A5 03010-A5 1/2-13 .315 (8.0mm) .87 .10 .08 6.74 12.36 03000-A6 03010-A6 5/8-11 .394 (10.0mm) .94 .14 .10 14.61 28.10

METRIC S P R I N G F O R C E Part # Part # D D1 L H N F1 F2Steel Stainless mm mm mm mm mm Initial Lbs. Final Lbs.03000-03 03010-03 M3 1.5 7 0.5 0.4 .34 .6703000-04 03010-04 M4 2.5 9 0.8 0.6 .90 2.2503000-05 03010-05 M5 3 12 0.9 0.8 1.35 2.4703000-06 03010-06 M6 3.5 14 1 1 2.02 2.9203000-08 03010-08 M8 5 16 1.5 1.2 3.37 6.7403000-10 03010-10 M10 6 19 2 1.6 4.50 7.8703000-12 03010-12 M12 8 22 2.5 2 6.74 12.3603000-16 03010-16 M16 10 24 3.5 2.5 14.61 28.1003000-20 03010-20 M20 12 30 4.5 2.5 17.98 35.97

Heavy End Force INCH S P R I N G F O R C E Part # Part # F1 F2Steel Stainless D D1 L H N Initial Lbs. Final Lbs.03000-2A1 03010-2A1 10-32 .118 (3.0mm) .47 .04 .03 4.27 6.74 03000-2AJ 03010-2AJ 1/4-28 .138 (3.5mm) .55 .04 .04 6.29 8.99 03000-2A2 03010-2A2 1/4-20 .138 (3.5mm) .55 .04 .04 6.29 8.99 03000-2A3 03010-2A3 5/16-18 .197 (5.0mm) .63 .06 .05 10.57 16.41 03000-2A4 03010-2A4 3/8-16 .236 (6.0mm) .75 .08 .06 14.84 22.48 03000-2A5 03010-2A5 1/2-13 .315 (8.0mm) .87 .10 .08 14.84 26.98 03000-2A6 03010-2A6 5/8-11 .394 (10.0mm) .94 .14 .10 20.23 40.46

METRIC S P R I N G F O R C E Part # Part # D D1 L H N F1 F2Steel Stainless mm mm mm mm mm Initial Lbs. Final Lbs.03000-205 03010-205 M5 3 12 0.9 0.8 4.27 6.7403000-206 03010-206 M6 3.5 14 1 1 6.29 8.9903000-208 03010-208 M8 5 16 1.5 1.2 10.57 16.4103000-210 03010-210 M10 6 19 2 1.6 14.84 22.4803000-212 03010-212 M12 8 22 2.5 2 14.84 26.9803000-216 03010-216 M16 10 24 3.5 2.5 20.23 40.4603000-220 03010-220 M20 12 30 4.5 2.5 25.85 53.95

SPRING PLUNGERS

Ball Type | Slotted End | Steel and Stainless Steel | Inch and Metric


387


SPRING PLUNGERS

Ball Type with Nylon Locking | Slotted End | Steel and Stainless Steel | Inch and Metric

* *

Applies to plungerswhere D =M3, M4, M5 & M6,�6-32, 8-36, 8-32, 10-321/4-28 & 1/4-20*L2 = Approx. two thread turns.

Ball type plunger with slotted end. The Long-Lok nylon locking system prevents loosening from impact or vibrations. The steel version has a steel sleeve, ball andspring. The sleeve has a black oxide finish and the ball is hardened. The stainless version has a stainless sleeve, ball and spring. The stainless sleeves have a naturalfinish and the ball is hardened.

Standard End Force INCH S P R I N G F O R C EPart # Part # +/-.02 F1 F2Steel Stainless D D1 L L1 H N Initial Lbs. Final Lbs.03001-AD 03011-AD 6-32 .059 (1.5mm) .28 .16 .02 .02 .34 .6703001-AG 03011-AG 8-36 .098 (2.5mm) .35 .20 .03 .02 .90 2.25 03001-AE 03011-AE 8-32 .098 (2.5mm) .35 .20 .03 .02 .90 2.25 03001-A1 03011-A1 10-32 .118 (3.0mm) .47 .24 .04 .03 1.35 2.47 03001-AJ 03011-AJ 1/4-28 .138 (3.5mm) .55 .28 .04 .04 2.02 2.92 03001-A2 03011-A2 1/4-20 .138 (3.5mm) .55 .28 .04 .04 2.02 2.92 03001-A3 03011-A3 5/16-18 .197 (5.0mm) .63 .31 .06 .05 3.37 6.74 03001-A4 03011-A4 3/8-16 .236 (6.0mm) .75 .35 .08 .06 4.50 7.87 03001-A5 03011-A5 1/2-13 .315 (8.0mm) .87 .39 .10 .08 6.74 12.36 03001-A6 03011-A6 5/8-11 .394 (10.0mm) .94 .55 .14 .10 14.61 28.10

METRIC +/-0.5 S P R I N G F O R C EPart # Part # D D1 L L1 H N F1 F2Steel Stainless mm mm mm mm mm mm Initial Lbs. Final Lbs.03001-03 03011-03 M3 1.5 7 4 0.5 0.4 .34 .6703001-04 03011-04 M4 2.5 9 5 0.8 0.6 .90 2.2503001-05 03011-05 M5 3 12 6 0.9 0.8 1.35 2.4703001-06 03011-06 M6 3.5 14 7 1 1 2.02 2.9203001-08 03011-08 M8 5 16 8 1.5 1.2 3.37 6.7403001-10 03011-10 M10 6 19 9 2 1.6 4.50 7.8703001-12 03011-12 M12 8 22 10 2.5 2 6.74 12.3603001-16 03011-16 M16 10 24 14 3.5 2.5 14.61 28.10

Heavy End Force INCH S P R I N G F O R C EPart # Part # +/-.02 F1 F2Steel Stainless D D1 L L1 H N Initial Lbs. Final Lbs.03001-2A1 03011-2A1 10-32 .118 (3.0mm) .47 .24 .04 .03 4.27 6.74 03001-2AJ 03011-2AJ 1/4-28 .138 (3.5mm) .55 .28 .04 .04 6.29 8.99 03001-2A2 03011-2A2 1/4-20 .138 (3.5mm) .55 .28 .04 .04 6.29 8.99 03001-2A3 03011-2A3 5/16-18 .197 (5.0mm) .63 .31 .06 .05 10.57 16.41 03001-2A4 03011-2A4 3/8-16 .236 (6.0mm) .75 .35 .08 .06 14.84 22.48 03001-2A5 03011-2A5 1/2-13 .315 (8.0mm) .87 .39 .10 .08 14.84 26.98 03001-2A6 03011-2A6 5/8-11 .394 (10.0mm) .94 .55 .14 .10 20.23 40.46

METRIC +/-0.5 S P R I N G F O R C EPart # Part # D D1 L L1 H N F1 F2Steel Stainless mm mm mm mm mm mm Initial Lbs. Final Lbs.03001-205 03011-205 M5 3 12 6 0.9 0.8 4.27 6.7403001-206 03011-206 M6 3.5 14 7 1 1 6.29 8.9903001-208 03011-208 M8 5 16 8 1.5 1.2 10.57 16.4103001-210 03011-210 M10 6 19 9 2 1.6 14.84 22.4803001-212 03011-212 M12 8 22 10 2.5 2 14.84 26.9803001-216 03011-216 M16 10 24 14 3.5 2.5 20.23 40.46


388


Ball type plunger with hex end. The steel version has a steel sleeve, ball and spring. The sleeve has a black oxide finish andthe ball is hardened. The stainless version has a stainless sleeve, ball and spring. The stainless sleeves have a natural finishand the ball is hardened.

Standard End Force INCH S P R I N G F O R C E Part # Part # F1 F2Steel Stainless D D1 L H S Initial Lbs. Final Lbs.03030-AJ 03035-AJ 1/4-28 .138 (3.5mm) .59 .04 1/8 2.02 2.92 03030-A2 03035-A2 1/4-20 .138 (3.5mm) .59 .04 1/8 2.02 2.92 03030-A3 03035-A3 5/16-18 .197 (5.0mm) .71 .06 5/32 3.37 6.74 03030-A4 03035-A4 3/8-16 .236 (6.0mm) .91 .08 3/16 4.50 7.87 03030-A5 03035-A5 1/2-13 .315 (8.0mm) 1.02 .10 7/32 6.74 12.36 03030-A6 03035-A6 5/8-11 .394 (10.0mm) 1.30 .14 5/16 14.61 28.10

METRIC S P R I N G F O R C E Part # Part # D D1 L H S F1 F2Steel Stainless mm mm mm mm mm Initial Lbs. Final Lbs.03030-03 03035-03 M3 1.5 9 0.5 1.5 .34 .6703030-04 03035-04 M4 2.5 10 0.8 2 .90 2.2503030-05 03035-05 M5 3 14 0.9 3 1.35 2.4703030-06 03035-06 M6 3.5 15 1 3 2.02 2.9203030-08 03035-08 M8 5 18 1.5 4 3.37 6.7403030-10 03035-10 M10 6 23 2 5 4.50 7.8703030-12 03035-12 M12 8 26 2.5 6 6.74 12.3603030-16 03035-16 M16 10 33 3.5 8 14.61 28.1003030-20 03035-20 M20 12 43 4.5 10 17.98 35.9703030-24 03035-24 M24 15 48 5.5 12 20.23 40.46

Heavy End Force INCH S P R I N G F O R C E Part # Part # F1 F2Steel Stainless D D1 L H S Initial Lbs. Final Lbs.03030-2AJ 03035-2AJ 1/4-28 .138 (3.5mm) .59 .04 1/8 6.29 8.99 03030-2A2 03035-2A2 1/4-20 .138 (3.5mm) .59 .04 1/8 6.28 8.99 03030-2A3 03035-2A3 5/16-18 .197 (5.0mm) .71 .06 5/32 10.57 16.41 03030-2A4 03035-2A4 3/8-16 .236 (6.0mm) .91 .08 3/16 14.84 22.48 03030-2A5 03035-2A5 1/2-13 .315 (8.0mm) 1.02 .10 7/32 14.84 26.98 03030-2A6 03035-2A6 5/8-11 .394 (10.0mm) 1.30 .14 5/16 20.23 40.46

METRIC S P R I N G F O R C E Part # Part # D D1 L H S F1 F2Steel Stainless mm mm mm mm mm Initial Lbs. Final Lbs.03030-203 03035-203 M3 1.5 9 0.5 1.5 1.12 1.5703030-204 03035-204 M4 2.5 10 0.8 2 2.70 4.9503030-205 03035-205 M5 3 14 0.9 3 4.27 6.7403030-206 03035-206 M6 3.5 15 1 3 6.29 8.9903030-208 03035-208 M8 5 18 1.5 4 10.57 16.4103030-210 03035-210 M10 6 23 2 5 14.84 22.4803030-212 03035-212 M12 8 26 2.5 6 14.84 26.9803030-216 03035-216 M16 10 33 3.5 8 20.23 40.4603030-220 03035-220 M20 12 43 4.5 10 25.85 53.9503030-224 03035-224 M24 15 48 5.5 12 29.22 60.70

SPRING PLUNGERS

Ball Type | Hex End | Steel and Stainless Steel | Inch and Metric How To Use


389


Ball type plunger with hex end. The Long-Lok nylon locking system prevents loosening from impact or vibrations. The steel version has a steel sleeve, ball and spring.The sleeve has a black oxide finish and the ball is hardened. The stainless version has a stainless sleeve, ball and spring. The stainless sleeves have a natural finish andthe ball is hardened.

Standard End Force INCH S P R I N G F O R C EPart # Part # +/-.02 F1 F2Steel Stainless D D1 L L1 H S Initial Lbs. Final Lbs.03031-AJ 03036-AJ 1/4-28 .138 (3.5mm) .59 .28 .04 1/8 2.02 2.92 03031-A2 03036-A2 1/4-20 .138 (3.5mm) .59 .28 .04 1/8 2.02 2.92 03031-A3 03036-A3 5/16-18 .197 (5.0mm) .71 .31 .06 5/32 3.37 6.74 03031-A4 03036-A4 3/8-16 .236 (6.0mm) .91 .35 .08 3/16 4.50 7.87 03031-A5 03036-A5 1/2-13 .315 (8.0mm) 1.02 .39 .10 7/32 6.74 12.36 03031-A6 03036-A6 5/8-11 .394 (10.0mm) 1.30 .55 .14 5/16 14.61 28.10

METRIC +/-0.5 S P R I N G F O R C EPart # Part # D D1 L L1 H S F1 F2Steel Stainless mm mm mm mm mm mm Initial Lbs. Final Lbs.03031-03 03036-03 M3 1.5 9 4 0.5 1.5 .34 .6703031-04 03036-04 M4 2.5 10 5 0.8 2 .90 2.2503031-05 03036-05 M5 3 14 6 0.9 3 1.35 2.4703031-06 03036-06 M6 3.5 15 7 1 3 2.02 2.9203031-08 03036-08 M8 5 18 8 1.5 4 3.37 6.7403031-10 03036-10 M10 6 23 9 2 5 4.50 7.8703031-12 03036-12 M12 8 26 10 2.5 6 6.74 12.3603031-16 03036-16 M16 10 33 14 3.5 8 14.61 28.10

Heavy End Force INCH S P R I N G F O R C EPart # Part # +/-.02 F1 F2Steel Stainless D D1 L L1 H S Initial Lbs. Final Lbs.03031-2AJ 03036-2AJ 1/4-28 .138 (3.5mm) .59 .28 .04 1/8 6.29 8.99 03031-2A2 03036-2A2 1/4-20 .138 (3.5mm) .59 .28 .04 1/8 6.29 8.99 03031-2A3 03036-2A3 5/16-18 .197 (5.0mm) .71 .31 .06 5/32 10.57 16.41 03031-2A4 03036-2A4 3/8-16 .236 (6.0mm) .91 .35 .08 3/16 14.84 22.48 03031-2A5 03036-2A5 1/2-13 .315 (8.0mm) 1.02 .39 .10 7/32 14.84 26.98 03031-2A6 03036-2A6 5/8-11 .394 (10.0mm) 1.30 .55 .14 5/16 20.23 40.46

METRIC +/-0.5 S P R I N G F O R C EPart # Part # D D1 L L1 H S F1 F2Steel Stainless mm mm mm mm mm mm Initial Lbs. Final Lbs.03031-203 03036-203 M3 1.5 9 4 0.5 1.5 1.12 1.5703031-204 03036-204 M4 2.5 10 5 0.8 2 2.70 4.9503031-205 03036-205 M5 3 14 6 0.9 3 4.27 6.7403031-206 03036-206 M6 3.5 15 7 1 3 6.29 8.9903031-208 03036-208 M8 5 18 8 1.5 4 10.57 16.4103031-210 03036-210 M10 6 23 9 2 5 14.84 22.4803031-212 03036-212 M12 8 26 10 2.5 6 14.84 26.9803031-216 03036-216 M16 10 33 14 3.5 8 20.23 40.46

SPRING PLUNGERS

Ball Type with Nylon Locking | Hex End | Steel and Stainless Steel | Inch and Metric

*L2 = Approx. two thread turns.

*


390


SPRING PLUNGERS

Ball Type | Slotted End | Ceramic Ball | Metric

a = 60°, F’ = 1.732 x Fa = 90°, F’ = Fa = 120°, F’ = 0.577 x F F

a

F’

Ball type plunger with slotted end. The ceramic ball provides excellent strength, wear and chemical resistance. The sleeve and spring are made from stainless steelwith a natural finish.

D D1 L H N S P R I N G F O R C E Part # mm mm mm mm mm Initial Lbs. Final Lbs.03008-05 M5 3 12 0.9 0.8 1.4 2.503008-06 M6 3.5 14 1 1 2.0 2.903008-08 M8 5 16 1.5 1.2 3.4 6.703008-10 M10 6 19 2 1.6 4.6 7.903008-12 M12 8 22 2.5 2 6.7 12.303008-16 M16 10 24 3.5 2.5 14.6 28.1

Ball Type | Hex End | Ceramic Ball | Metric

a = 60°, F’ = 1.732 x Fa = 90°, F’ = Fa = 120°, F’ = 0.577 x F

a

F

F’

Ball type plunger with hex end. The ceramic ball provides excellent strength, wear and chemical resistance. The sleeve and spring are made from stainless steel with anatural finish.

D D1 L H S S P R I N G F O R C E Part # mm mm mm mm mm Initial Lbs. Final Lbs.03033-05 M5 3 14 0.9 2.5 1.4 2.503033-06 M6 3.5 15 1 3 2.0 2.903033-08 M8 5 18 1.5 4 3.4 6.703033-10 M10 6 23 2 5 4.6 7.903033-12 M12 8 26 2.5 6 6.7 12.303033-16 M16 10 33 3.5 8 14.6 28.1


391


SPRING PLUNGERS

Ball Type | Plastic Body | Non-Threaded | Metric

Ball Type | Stainless Steel Body | Non-Threaded | Metric 0.

08

Black thermoplastic body with stainless spring. Available with either plastic or stainless steel ball. The stainless steel ball is hardened. Recommended hole tolerance is+0.10 to +0.15 mm.

With Stainless Ball SPRING FORCE +0.1 F1 F2 D D1 D2 L L1 H Initial FinalPart # mm mm mm mm mm mm Lbs. Lbs. 03071-04 4 3 4.6 5 1 0.7 .67 1.57 03071-05 5 4 5.6 6 1 1 .90 1.57 03071-06 6 5 6.5 7 1 1.5 1.35 2.70 03071-08 8 6.5 8.5 9 1 1.8 1.35 2.70 03071-10 10 8 12 13.5 2.5 2.7 2.25 4.5003071-12 12 10 14 16 2.5 3.5 3.37 5.62

With Plastic Ball SPRING FORCE +0.1 F1 F2 D D1 D2 L L1 H Initial FinalPart # mm mm mm mm mm mm Lbs. Lbs. 03071-204 4 3 4.6 5 1 0.9 .67 1.57 03071-205 5 4 5.6 6 1 1.2 .90 1.57 03071-206 6 5 6.5 7 1 1.5 1.35 2.70 03071-208 8 6.5 8.5 9 1 2 1.35 2.70 03071-210 10 8 12 13.5 2.5 2.7 2.25 4.5003071-212 12 10 14 16 2.5 3.5 3.37 5.62

Stainless steel body with stainless spring. Available with either plastic or stainless steel ball. The stainless steel ball is hardened. Recommended hole tolerance is +0.08 to +0.13 mm.

With Stainless Ball SPRING FORCE +.08 F1 F2 D D1 D2 L L1 H Initial FinalPart # mm mm mm mm mm mm Lbs. Lbs. 03070-04 4 3 4.6 5 1 .8 .67 1.57 03070-104 4 3 4.6 9 1 .8 2.70 4.95 03070-05 5 4 5.6 6 1 1 .90 1.57 03070-105 5 4 5.6 12 1 1 4.27 6.74 03070-06 6 5 6.5 7 1 1.5 1.35 2.70 03070-106 6 5 6.5 14 1 1.5 4.95 8.99 03070-08 8 6.5 8.5 9 1 1.8 1.35 2.70 03070-108 8 6 8.5 16 1 1.8 9.44 16.41 03070-10 10 8 12 12.5 2.5 2.7 2.25 4.50 03070-110 10 8 12 22 2.5 2.7 12.14 22.48 03070-12 12 10 14 16 2.5 3.5 3.37 5.62 03070-112 12 10 14 24 2.5 3.5 12.14 27.43

With Plastic Ball SPRING FORCE +.08 F1 F2 D D1 D2 L L1 H Initial FinalPart # mm mm mm mm mm mm Lbs. Lbs. 03070-304 4 3 4.6 5 1 .5 .67 1.5703070-404 4 3 4.6 9 1 .8 2.70 4.9503070-305 5 4 5.6 6 1 0.6 .90 1.5703070-405 5 4 5.6 12 1 1 4.27 6.7403070-306 6 5 6.5 7 1 1.1 1.35 2.7003070-406 6 5 6.5 14 1 1.5 4.95 8.9903070-308 8 6.5 8.5 9 1 1.5 1.35 2.7003070-408 8 6 8.5 16 1 1.8 9.44 16.4103070-310 10 8 12 12.5 2.5 2.3 2.25 4.5003070-410 10 8 12 22 2.5 2.7 12.14 22.4803070-312 12 10 14 16 2.5 3.1 3.37 5.6203070-412 12 10 14 24 2.5 3.5 12.14 27.43


392

SPRING PLUNGERS

D2 +

0,05

L -0,2

knurl

These ball type plungers feature a ball on both ends of the brass body. The balls and springs are made from stainless steel. The balls are hardened.

S P R I N G F O R C E D D1 D2 L H F1 F2Part # mm mm mm mm mm Initial Lbs. Final Lbs.03074-04 4 3 4.05 10 .9 .67 1.5703074-05 5 4 5.05 12 1.2 .90 1.8003074-06 6 5 6.05 16 1.6 1.35 2.2503074-08 8 6 8.05 20 2 1.80 2.7003074-10 10 8 10.05 24 2.9 2.25 3.60

Ball Type | Brass Body | Non-Threaded | Double End | Metric

L1L2

HL

L3

F2

F1

D2 -

0,1

D1

D -0

,05

D4 +0,1

D3 H11

20°

L4

Assembly dimensions

The o-ring is designed to keep the plunger in place when used in vertical or overhead applications. The body, ball and spring are made from stainless steel. The ball ishardened. The o-ring is made from Buna-N.

S P R I N G F O R C E D D1 D2 D3 D4 H L L1 L2 L3 L4 F1 F2 Part # mm mm mm mm mm mm mm mm mm mm mm Initial Lbs. Final Lbs.03065-05 4.95 3 4 5 4.1 .8 5 1 .7 2.3 .7 .67 1.5703065-06 5.95 4 5 6 5.1 1 6 1 .7 2.3 .7 .90 1.5703065-08 7.95 5 6 8 6.1 1.5 7 1.5 1.2 3.7 1 1.35 2.7003065-10 9.95 6.5 8 10 8.1 1.8 9 2 1.2 4.2 1.5 1.35 2.7003065-12 11.95 8 10 12 10.1 2.7 13.5 2.5 1.8 5.3 2 2.25 4.5003065-14 13.95 10 12 14 12.1 3.5 16 2.5 1.8 5.5 2 3.37 5.62

Ball Type | Stainless Steel Body | Non-Threaded with O-Ring | Metric

Documents

PIN STYLE BALL STYLE - Fixtureworks - Fixtureworks...Fixtureworks | 33792 Doreka Dr., Fraser MI 48026 | Phone: 586-294-1188 | Fax: 586-294-4843 | 378 Pin type plunger with slotted