Upload
tashome
View
223
Download
2
Embed Size (px)
DESCRIPTION
PinkBatts - Insulation Guide
Citation preview
The PINK® guide to Insulation
PINK BATTS®
PINK POLY®
SISALATION®
PERMASTOP®
PINK BATTS® SILENCER®
PINK SONOBATTS®
POLYCOUSTIC™
PINK BATTS® & HIgH dENSITY PINK BATTS®
SISALATION®
TUFFSTUFF™ WALL WRAP BY SISALATION®
COSYFLOOR™
PINK BATTS® Comfort for KeepsWarmer in Winter, co oler in summer
THERMAL INSULATION FOR WALLS AND CEILINGS
R-values Application/UseSizes (mm)
Coverage* per Pack (m2)
Pack Qty
R1.5 Wall Batts
the standard batt designed for insulating walls
1160 x 430 9.0 16
1160 x 580 12.2 16
R2.0 Wall Batts
extra performance for harsher climates
1160 x 430 9.0 16
1160 x 580 12.2 16
R2.5 High Density Wall Batts
optimal 90mm wall insulation - used to meet 5 star requirements in a 90mm wall cavity
1160 x 430 9.0 16
1160 x 580 12.2 16
R2.5 ceiling Batts
the batt for mild climates1160 x 430 9.0 16
1160 x 580 12.2 16
R3.3 ceiling Batts
our most popular batt suitable for most regions of australia
1160 x 430 9.0 16
1160 x 580 12.2 16
R3.8 ceiling Batts
extra performance for harsher climates
1160 x 430 9.0 16
1160 x 580 7.6 10
R4.0†† ceiling Batts
ideal for meeting 5 star requirements in more severe climates
1160 x 430†† 5.6 10
1160 x 580†† 7.6 10
*Coverage is an approximation allowing for framing materials. ††Not stocked in all locations.
• Pink Batts® are a proven performer, improving comfort in the home by reducing heat gain/loss through walls and ceilings.
• inside temperatures in summer reduced by up to 8-12°c.
• reduces heating/cooling costs by up to 40%.
• Pink Batts are a sustainable product, made from up to 70% recycled glass that would otherwise go to land fill.
• safe due to superior fire performance being non combustible*.
• Pays for itself in as little as 3-4 years.
• reduces energy usage which in turn reduces greenhouse gas emissions.
• safe to use with allergy sufferers due to low Voc content.
• Designed to fit standard 450mm & 600mm ceiling joist and wall stud spacings.
• easy to cut and install by DiY
• safe due to bonded fibres that do not move around in the attic space or enter the home.
• Will not settle - thereby providing optimum performance for the life of the home.
• Guaranteed for the life of the home.
• Proven insulation performance that can be measured - not theoretical calculations
*When tested to as1530.1
PINK BATTS® SILENCER® acoustic insulation A Sound Investment
ACOUSTIC INSULATION FOR WALLS, CEILINGS AND BETWEEN FLOORS
Thickness R-values Application/UseSizes (mm)
Coverage* per Pack
(m2)
Pack Qty
50mm R1.3acoustic wall insulation suitable for use with 64mm steel studs
1160 x 430 9.2 16
1200 x 600** 11.5 16
2700 x 600** 19.4 12
70mm R1.7
acoustic wall insulation suitable for use with 70mm timber or 76mm steel studs
1160 x 430 5.6 10
1200 x 600** 7.2 10
2700 x 600** 19.4 12
90mm R2.1
acoustic wall insulation for floor, ceiling and specific wall applications for use with 90mm timber or 92mm steel studs
1160 x 430 4.5 8
1200 x 600** 5.8 8
• improves comfort by reducing noise transfer between rooms.
• can also be used in multiple storey buildings to reduce noise transfer between floors.
• easy to install during construction.
• Designed to fit standard 450mm & 600mm wall stud and floor joist spacings.
• increases privacy within the home.
• Will not settle, shrink or blow around.
• Will not rot, decay or sustain vermin.
• low allergen rating due to low Voc content.
• Provides thermal insulation within the home.
• Pink Batts Silencer can be used in many wall or ceiling systems to achieve the desired outcome. refer to our acoustic manual for details on noise reduction capabilities.
• manufactured from up to 70% recycled materials.*Coverage is an approximation allowing for framing materials. **For metal frames.
PINK SONOBATTS® Sile ncer+Premium acoustic insu lation
ACOUSTIC INSULATION FOR WALLS, CEILINGS AND BETWEEN FLOORS
Thickness R-values Application/UseSizes (mm)
Coverage* per Pack
(m2)
Pack Qty
50mm R1.8superior acoustic wall insulation suitable for use with 64mm steel studs
1160 x 430 4.5 8
1160 x 580 6.1 8
70mm R2.1
superior acoustic wall insulation suitable for use with 70mm timber or 76mm steel studs
1160 x 430 4.5 8
1160 x 580 6.1 8
90mm R2.7
superior acoustic wall insulation for floor, ceiling and specific wall applications for use with 90mm timber or 92mm steel studs
1160 x 430 3.4 6
1160 x 580 4.5 6
• Pink SonoBatts, the ultimate cavity infill insulation for room to room noise control.
• improves comfort by reducing noise transfer between rooms.
• can also be used in multiple storey buildings to reduce noise transfer between floors.
• High density products with an acoustic performance equivalent to rockwool at all frequency ranges.
• Pink SonoBatts can be used in many wall or ceiling systems to acheive the desired outcome. refer to our acoustic manual for more systems.
• Designed to fit standard 450mm and 600mm wall stud and floor joist spacings.
• easy to install in new ceilings, between floors and internal stud walls during construction or existing ceilings.
• 90mm Pink SonoBatts provide ultimate noise reduction plus r2.7 thermal insulation in one product.
• Guaranteed to perform for the life of your home.
• Will not rot, decay or sustain vermin.
• low allergen due to low Voc content, safe for asthma or allergy sufferers.
• manufactured from up to 70% recycled materials.
*Coverage is an approximation allowing for framing materials.
SONOBATTSSILENCER+
loudroom
80dB
QUIET
42dB
Rw38
LESS38dB
Quietroom
loudroom
80dB
QUIETER
40dB
Rw40
LESS40dB
Quieterroom
loudroom
80dB
QUIETEST
33dB
Rw47
LESS47dB
QuieteStroom
sound reduction index (rw) is a term used to measure airborne sound transmission loss through a building element, such as a wall, floor, ceilings and pipes. the rw ratings shown can be achieved using typical building materials - 70mm timber studs, plasterboard and acoustic insulation batts installed between the studs.
The higher the Rw rating, the less noise you’ll hear from upstairs, downstairs or the next room.
QuietWall® 38 System70mm Pink Batts silencer® with 10mm standard core
plasterboard on both sides.
QuietWall® 40 System70mm Pink SonoBatts with 10mm Boral soundstop®
plasterboard on both sides.
QuietWall® 47 System70mm Pink SonoBatts with 10mm Boral SoundStop
plasterboard on both sides and 13mm Fletcher insulation
noisestop board® on one side.
PINK POLy®
Warmer in Winter, co oler in summer
POLyESTER THERMAL INSULATION FOR WALLS AND CEILINGS
R-values Application/UseSizes (mm)
Coverage* per Pack (m2)
Pack Qty
R1.5 Wall Batts
the standard batt designed for insulating walls
1160 x 430 9.0 16
1160 x 580 12.2 16
R2.0 ceiling Batts
the batt often used to top up ceiling insulation
1160 x 430 4.5 8
1160 x 580 6.1 8
R2.5 ceiling Batts
the batt for moderate climates1160 x 430 4.5 8
1160 x 580 6.1 8
R3.0 ceiling Batts
our standard for polyester ceiling insulation
1160 x 430 3.4 6
1160 x 580 4.5 6
R3.5 ceiling Batts
the batt that provides extra insulation performance
1160 x 430 3.4 6
1160 x 580 4.5 6
• soft to touch and easy to install.
• low allergen. safe for asthma and allergy sufferers.
• insulation is the most cost effective way of improving a home’s energy efficiency.
• reduces heating/cooling costs by up to 40%.
• conserves energy and thereby reduces greenhouse gas emissions.
• Designed to fit standard 450mm & 600mm ceiling joists and wall stud spacings.
• Won’t settle, shrink or blow around.
• Will not rot, decay or sustain vermin.
• For greater r-values Pink Poly Batts can be doubled up (2 layers) *Coverage is an approximation allowing for framing materials.
POLYSoft Touch Insulation
POLyCOUSTIC™
PolYester acoustic ins ulation
ACOUSTIC INSULATION FOR INTERNAL WALLS AND BETWEEN FLOORS
R-valuesThickness
(mm)Application/Use
Sizes (mm)
Coverage* per Pack (m2)
Pack Qty
R1.5 Wall Batt
75mm
acoustic wall insulation suitable for use with 70mm timber or 76mm steel studs
1160 x 430 4.5 8
1160 x 580 6.1 8
R2.0 Wall Batt
95mm
acoustic wall insulation suitable for use with 90mm timber or 92mm steel studs
1160 x 430 4.5 8
1160 x 580 6.1 8
• reduces noise transfer between rooms.
• ideal for use in walls within the home.
• Designed to fit standard 450mm & 600mm wall stud and floor joist spacings.
• also provides thermal insulation within the home.
• reduces heating/cooling costs.
• Will not settle or shrink.
• Will not rot, decay or sustain vermin.
• low allergen. safe for asthma and allergy sufferers.
R-values Sizes (mm) Coverage per Pack (m2) Pack Qty
R1.5 10m x 450 9 2
R2.0 10m x 450 9 2
COSyFLOOR®
unDer Floor tHermal insulation
POLyESTER INSULATION FOR SUSPENDED TIMBER FLOORS
• made from polyester. soft to handle premium under floor insulation, which is easy to install.
• Provides thermal value which retards the flow of heat in and out of the home.
• adds comfort and energy efficiency to your suspended floor.
• reduces cold draughts from entering the home through suspended timber floors.
• allows compliance with 5 star in suspended timber floor construction or as a retro fit (where space allows).
*Coverage is an approximation allowing for framing materials.
reFlectiVe Foil laminateKeeP out Dust, DrauGHts & conDensation
ROOF SARKING
• the original and the best reflective foil laminate insulation in australia.
• acts as a second skin to protect your home should roof tiles move or break.
• acts as a barrier to protect your home from rain, dust, wind and moisture.
• Provides extra insulation against radiant heat - particulary effective in summer.
• sisalation® reflects up to 97% of radiant heat.• sisalation® is a must when dark coloured roofing
materials are used to minimalise heat gain.• can be used under tile or metal roofs.• Proven performance having been manufactured for
over 50 years.• strong and durable with flame retardant properties.• sisalation® can also be used as a wall wrap, or as
floor insulation on suspended timber floors (499 recommended).
• super sisalation® is a premium eHD tile roof sarking that has unique ‘fall arrest’ properties to protect workers during installation.
Product Name
Duty/Classification
Roll Size
Coverage per Roll (m2)
Pack Qty
super sisalation® tiled roof extra Heavy Duty (469)
extra Heavy Duty 1500mm x 30m 45 1
sisalation® tiled roof Heavy Duty (466)
Heavy Duty 1500mm x 30m 45 1
TILED ROOF
METAL ROOFProduct Name
Duty/Classification
Roll Size
Coverage per Roll (m2)
Pack Qty
sisalation® metal roof Heavy Duty (453)
Heavy Duty 1350mm x 20m 27 1
1350mm x 60m 81 1
1500mm x 30m 45 1
sisalation® metal roof medium Duty (433)
medium Duty 1350mm x 20m 27 1
1350mm x 30m 40.5 1
1350mm x 60m 81 1
1500mm x 30m 45 1
Wall WraPKeeP out Dust, DrauGHts & conDensation
INSULATION AND WEATHERPROOFING FOR FRA MED WALLS
• australia’s favourite wall wrap.
• light, yet strong and easy to use.
• extra heavy duty performance.
• Provides insulation benefits especially against radiant heat.
• reflects up to 97% of radiant heat.
• also helps seal a home to improve energy efficiency and keep out dust and droughts.
• allows internal trades to keep working during construction even if external cladding is delayed.
• standard TuffStuff is used for brick veneer homes.
• TuffStuff breather is used for timber or fibre cement cladding that is applied direct to the frame.
• Flame retardant properties.
• available in 1500mm wide - ideal for 2700mm ceiling heights.
Product Name
Duty/Classification
Roll Size
Coverage per Roll (m2)
Pack Qty
Tuffstuff by sisalation® extra Heavy Duty Wall Wrap (standard)
extra Heavy Duty 1350mm x 20m 27 1
1350mm x 60m 81 1
1500mm x 60m 90 1
Tuffstuff by sisalation® extra Heavy Duty Wall Wrap (Breather)
extra Heavy Duty 1350mm x 20m 27 1
1350mm x 60m 81 1
1500mm x 60m 90 1
NOTE: Tuffstuff™ is designed as a wall wrap only. NOT TO BE USED AS ROOF SARKING.
PERMASTOP® Making m etal roofs betterinsulation BlanKet & r eFlectiVe Foil laminate
THERMAL AND ACOUSTIC INSULATION AND COND ENSATION CONTROL FOR METAL ROOFS
Product Name
Blanket* R-value
Thickness (mm)
Sizes (m x mm)
Coverage per Roll (m2)
Pack Qty
Permastop light Duty sisalation®
R1.3 55 15 x 1200 18 1
R1.8 75 15 x 1200 18 1
R2.3 100 10 x 1200 12 1
Permastop medium Duty sisalation®
R1.3 55 15 x 1200 18 1
R1.8 75 15 x 1200 18 1
R2.3 100 10 x 1200 12 1
Permastop Heavy Duty sisalation®
R1.3 55 15 x 1200 18 1
R1.8 75 15 x 1200 18 1
R2.3 100 10 x 1200 12 1
Reduces heat in roof space, reducingthe need for artificial cooling
Reduces heat loss through roof space,reducing the need for heating
Pink Batts
Permastop
Pink Batts
Permastop
SUMMER - INSULATED ROOF WINTER - INSULATED ROOF
Warm air forms condensation on the inside of the uninsulated metal roof
Warm air forms condensation on the inside of the cold uninsulated metal roof
SUMMER - UNINSULATED ROOF WINTER - UNINSULATED ROOF
STOP heating and cooling loss
STOP Condensation in ceilings
• Proven thermal insulation under metal roofing.
• also very effective at reducing rain and hail noise.
• Provides condensation control to protect your valuable investment.
• reduces the amount of heat entering your attic space working in tandem with ceiling insulation.
• incorporates glasswool blanket – proven performance at reducing heat gain/loss from buildings.
• also uses sisalation® which reflects up to 97% of radiant heat.
• ideal for use with any metal roof in residential or commercial buildings.
• excellent fire retardant properties. Glasswool is non-combustible and sisalation® with a low flammability index.
• a sustainable product made from up to 70% recycled raw materials.
• low allergen and safe to use with asthma and allergy suffers.
*The R-values listed are material only, R-value in situ will vary depending on the system used. Refer to Fletcher Insulation for details.
PINK BATTS®
australia’s FaVourite insulation
climate change is a real threat to our future and experts agree that insulation will play an increasingly important role in reducing our dependence on artificial heating and cooling which will help reduce GHG emissions. For a sustainable future we must act now to reduce our energy consumption for heating and cooling our buildings and homes.
Pink Batts is a proven performer when it comes to achieving this goal. Pink Batts are committed to producing product for a sustainable future by using up to 70% recycled glass in their manufacture.
Pink Batts insulation products are an integral part of building an energy efficient home. the ideal is to design and build insulated homes that will require no artificial heating or cooling. to achieve this the design also needs to consider maximising northern sunlight in winter through good use of orientation on the site, incorporating shading devices, the correct selection of building materials and considering window design that eliminates the need to reduce glass area (except on west facing windows).
Pink Batts have been producing insulation for australian homes for over 50 years providing increased thermal and acoustic comfort and energy savings. if you’re building a new home, an extension or renovating make sure you include Pink Batts thermal and acoustic insulation and help secure our environment for future generations to enjoy.
1956 . . . . . . . the first glasswool insulation is produced at a plant in sydney.
1963 . . . . . . . Production moves to the world class Dandenong site in melbourne.
1970 . . . . . . . Pink Batts establish themselves as the market leaders in bulk thermal insulation.
2000 . . . . . . . new generation FBs-1 bio-soluble formulation introduced.
2006 . . . . . . . Pink Batts celebrate 50 years with a new look and new branding, reviving the Pink Batts name.
YPA
/651
7/A
PRIL0
7
Comfort➜ Increase comfort levels • Thermal • Acoustic
Save➜ Save on energy bills➜ Pays for itself in as little as 3-4 years
Health➜ Provide a healthier household environment
Efficient➜ Lower energy consumption
Environmental➜ Reduce greenhouse gas emissions
For more information contact: [email protected]
1300 300 249www.ecopink.com.au
Available from:
Fletcher Insulation, 161 Arthur Street, Homebush, NSW 2140, Australia ABN 72 001 175 355The colour PINK and PINK BATTS are registered trademarks of Owens Corning used under licence by Fletcher Insulation. ™ Trademarks of Fletcher Insulation
A Fletcher Building Company
➜ Save energy ➜ Save money ➜ Save the environment