Upload
dinhnhi
View
267
Download
2
Embed Size (px)
Citation preview
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
1
Revision date: 21 June 2016
Organisation Capability areas Specific courses offered APGA competency contributed to**
Onshore pipeline engineering courses (Offshore pipeline engineering courses below)
Australian Non-University
PipEd
Contact: Rebecca Fairley Level 2 349 Coronation Drive Milton QLD 4064 Tel: 07 3377 4131 Fax: 07 3870 2333 [email protected]
Pipeline Engineering • Introduction to AS 2885 and the Australian Pipeline Industry
• IB001, IB002
•
• Introduction to the PE Pipelines Code of Practice • IB005, PP001
• General Principles of Pipeline Design • DP001, DP002, DP007
• Fracture Control • DP014
• Basic Understanding of Cathodic Protection • CC001
• Hydrostatic Testing and Pipeline Commissioning for Steel Pipelines
• HC001
• Hydrostatic testing and Pipeline Commissioning for PE Pipelines
• PP006, PP007
• Pneumatic Testing and Commissioning for PE Pipelines • PP006, PP007
• Introduction to Pipeline Maintenance Pigging • OP014
• Introduction to HDPE Pipelines and Fittings • PP001, PP002
• Understanding Pipeline Licensee & Owner Obligations • IB004, SP001
• Process Plant Piping Fundamentals • DS003
• Pipeline Risk Management • RS001, RS002, RS003
• Working Safely near Pipelines and Pipeline Infrastructure • RS series - selected
• Regulatory Compliance in Queensland for Steel and PE Pipelines
• IB004, IB005, SP003
• Regulatory Requirements of Site Safety Managers on Pipelines in Queensland
• IB004, SP003, RS004
• Introduction to PE Pipelines Code of Practice • IB005
• Communication for Action • N/A
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
2
Organisation Capability areas Specific courses offered APGA competency contributed to**
• Accountable Project Leadership • PM series related
• Technical Report Writing • N/A
Romea Training
Contact: Leng Saw PO Box 861 Mandurah WA 6210 Tel: 08 9535 5315 Fax: 08 9535 7454 [email protected]
• AS 2885 courses
• HS&E
• Generic Hydrocarbon industry
• Hydrocarbons Transmission
• AS2885 Pipelines Gas & Liquid Petroleum • DP001, DP002, DP006, DP007, W002, AM001
• Defensive & 4 WD • RS010
• Emergency Response Program 1 • RS012
• Facility Operation Program 1 • DS016, OP012
• Facility Operation Program 2 • DS004, DS005, OP011
• Gas Control 2 • OP010
• Gas Pipeline Operation & Maintenance Statutory Obligations
• GE012, IB004
• Instrument/Electrical Program 1
•
• IC011, IC012, IC013
•
• Instrument/Electrical Program 2 • IC005, DS008
• Instrument/Electrical Program 3 • IC001
• Instrument/Electrical Program 5 • IC009, IC014
• Introduction to Company Health, Safety & Environment • RS001, RS004, RS011, EH008
• Introduction to Gas Pipeline Engineering • GE002, GE005, GE009, GE009, GE010, GE011, IB002, CC001, CC002
• Introduction to Gas Transmission Pipeline Operations • OP001, OP002
• Pipeline Communications Systems • IC003
• Pipeline Dynamics and Gas Control • OP003
• Pipeline Easement & Integrity Program 1 • DS014, DS015
• Pipeline Easement & Integrity Program 2 • CC003, CC004, CC007, OP021
• Pipeline Integrity Fundamentals • SI001, SI003
• Pipeline Mechanical Program 1 • IC010
• Pipeline Mechanical Program 2 • OP006, OP007, OP008, OP009, OP013, OP020
• Pipeline Station Operations Program 1 • IC002, DS009, DS010, DS011, DS012, DS013
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
3
Organisation Capability areas Specific courses offered APGA competency contributed to**
• SCADA and Control Systems • IC004
• Electrical White Card • RS015
• Equipment in Hazardous Areas (EEHA) • IC012
• Common Safety Training Program (CSTP) • RS001, RS008
Outback Advanced Systems Contact: Lynndon Harnell 0401 673100 [email protected]
Pipeline Engineering • APIA CoP Pneumatic and hydrostatic testing of PE pipelines.
• PP006, PP007
• Pressure Test Technician (in development) • HC001
• Test Engineer (in development) • HC001
• Senior Test Engineer (in development) • HC002, DP006, DP013
Competency Training - LogiCamms web : www.competencytraining.com.au ph : +61 7 3058 7000 fax : +61 7 3058 7111 direct : 1300 872 585 433 Boundary St, Spring Hill, Queensland, 4004
Various relating to Pipeline Engineering including: Electrical Hazardous Areas, High Voltage, Hydrocarbons and Professional Services
• Hazardous Areas Awareness • IC011, IC012, IC013
• EEHA Installation and Maintenance • IC011, IC012, IC013, RS013
• EEHA Classification and Design • IC011, IC012, IC013
• Conduct Conformity Assessments • IC011, IC012
• EEHA Overhaul and Repair • IC011, IC012
• EEHA Hazardous Areas Management • IC011, IC012
• EEHA Installation and Maintenance - Coal • IC011, IC012, IC013, RS013
• Design of Gas Detection Systems • IC014
• Certificate IV in Hazardous Areas • IC011, IC012, IC013, RS013
• High Voltage Awareness • N/A
• High Voltage Switching • N/A
• High Voltage Switching Operations • N/A
• High Voltage Isolation • N/A
• PLC Fundamentals • IC004
• PLC Advanced • IC004
• Certificate IV in Electrical – Instrumentation • IC001 – IC010
• General Electrical • IC series
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
4
Organisation Capability areas Specific courses offered APGA competency contributed to**
• Certificate IV in Training and Assessment Training • N/A
• TAE Delivery Skill Set • N/A
• TAE Assessment Skill Set • N/A
• Project Management Fundamentals • PM001, PM003, PM005
• Certificate IV in Project Management • PM001 – PM015
• Diploma in Project Management • PM001 – PM015
Engineering Education Australia
Contact: Ann Ellis Suite 202, 21 Bedford Street North Melbourne VIC 3051 Tel: 03 9274 9600 Fax: 03 9236 9888
A range of general and technical engineering courses
• Risk Liability Management • GE012
• Asset Management • AM002, AM003, AM008, AM018
• Business Acumen • CA001
• Contract Management • PM005, PM007
• Negotiation skills • PM005, PM006
• Pumping Systems Design • DS006
• Project Management • PM001 – PM015
• Project Management for Construction • CE001, PM001, CE003, CE014, PM008, PM011, PM014
• Managing Construction Contracts • PM007
• Design Management for Construction • PM003, PM004
• Managing Construction Risks • PM005
• Design of Buried Pipelines • DP002, DP010, DP021, GE013
• Detailed Engineering and Layout of Piping Systems • DS003
• Earthworks • DP018, DP021, CE018
Australian Corrosion Association PO Box 112 Kerrimuir Victoria 3129 Australia Suite 1, 458 Middleborough Road Blackburn Victoria 3130
Corrosion Control • Introduction to Corrosion • CC001
• NACE Basic Corrosion Course • CC001, CC002
• Corrosion Technology • CC002
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
5
Organisation Capability areas Specific courses offered APGA competency contributed to**
Tel: 03 9890 4833 Fax: 03 9890 7866 [email protected] www.corrosion.com.au
• Introduction to Protective Coatings • CC003
• Protective Coatings Quality Control • CC003
• Coatings Selection & Specification • CC003
• NACE Coating Inspection Program CIP Level 1 • CP007
• NACE Coating Inspection Program CIP Level 2 • CP007
• Coating Inspection Refresher • CP007
• Introduction to Cathodic Protection • CC001
• Cathodic Protection Monitoring • CC002
• Cathodic Protection Advanced • CC002
• CP 1 – Cathodic Protection Tester • CC002, CC007
WTIA Unit 50, 8 Avenue of the Americas Newington NSW 2127 Tel: 02 9748 4443 Fax: 02 9748 2858 Email: N/A
www.wtia.com.au
Welding, pipeline manufacture, metallurgy and defect assessment
Selected key courses:
• SWT-25 Welding Technology for Engineering Personnel
• W001
• SWT-57 Welding Technology for Engineers • W001
• SWT-32 General Pipeline Welding and NDT • W001, W004
• SWT-36 Introduction to Gas Metal Arc Welding and Flux Cored Arc Welding
• W001
• IWW Welding Engineer • W001, W007
• SWT-12D Module 3: Materials and their behaviour during welding
• W004, W007
• SWT-18 WTIA Welding Fabrication Inspector • W004
• SWT-34 Control of Welding Defects • W004
• SWT-39 Pipeline Defect Assessment • SI002
• SWT-40 Pipeline Repair/In-service Welding • OP006, OP007, OP008, W005
• SWT-41 Welding Metallurgy • W006
• SWT-48 Distortion and Residual Stress • DP013, W004
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
6
Organisation Capability areas Specific courses offered APGA competency contributed to**
• SWT-55 Welded Pipeline Fabrication • W001, W004
• SWT-66 Welding Technology for Design • W004
• SWT-67 Properties of materials and failure mechanisms • W006
• SWT-68 Design of Welded Structures • W004
• SWT-70 Design of Welded joints • W004
• SWT-75 Introduction to AS 4041 Piping • DS003
• SWT-76 Overview of AS 2885.2 • W002
• SWT-77 ASME IX & AS 2992 – Qualification of Welding Procedures and Welders
• W003
• SWT-79 Visual Inspection and How to Avoid Defects in Welded Construction
• W004
• SWT-80 Pipeline Fabrication
• SWT16B Welding Inspection – Basic Level
• SWT-17B Welding Inspection Standard Level
• SWT 18B Welding Inspection Comprehensive Level
• W001, W004
• W001
• W004
• W005
ESD Simulations Ste 14/ 755 Albany Hwy, East Victoria Park WA 6101 Tel: 08 9255 5599 Email: [email protected] www.esd-simulatioin.com
Equipment and process simulation and training
• Pump Fundamentals & Pump Systems • DS006
• Production Process & Emergency Systems on Oil and Gas Installations
• IC001, DS009
• Control & Operation of Centrifugal Compressors • OP011
• Mechanical Aspects of Centrifugal Compressors • AM012
• Practical Aspects of Process Control and Instrumentation • IC001
Institution of Chemical Engineers in Australia Level 7, 455 Bourke Street MELBOURNE VIC 3000 Tel: +61 (0)3 9642 4494 Fax: + 61 (0)3 9642 4495 [email protected]
Risk assessment and major hazard safety
• Layer of Protection Analysis (LOPA) • RA001, RA002
• HAZOP Study for Team Leaders and Team Members • RA003
• Hazard Identification Techniques • RA003
• Introduction to Risk Assessment • RA001, RA002
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
7
Organisation Capability areas Specific courses offered APGA competency contributed to**
TMS Consulting Level 2 21 Mary Street Brisbane QLD, Australia 4000 Phone: 07 3003 1473 Email: [email protected]
Human resources training • Fatigue management training for managers • SM007
Australian Institute of Project Management www.aipm.com.au
Project Management
Provides a list of endorsed course providers
• Various parts of PM series
Asset Management Council Asset Management • Asset Management Fundamentals • AM002
Steve Dykes Tel: 07 3289 3960/ 0417 637 148 Email: [email protected]
AS 2885 related In-house AS 2885 related • IB002, DP001, AM001
Ian Haddow Tel: 0418 447 341 Email: [email protected]
AS 2885 related In-house AS 2885 related • IB002, DP001, AM001
New Zealand Non-University
IDC Technologies Kevin Baker Tel: +64 9 263 4759 Email: [email protected]
Engineering training Pipeline Systems – Design, Construction, Maintenance and Asset Management
• IB004, EH001, EA001, RS001 RE001, DP001, DP003, DP004, DP007, CC001, CE001, CA001, SI001, AM001
BrightStar Tel: +64 9 912-3616 PO Box 31506 Milford Auckland 0741
Conferences and training Land Pipeline Engineering • IB004, EH001, EA001, RS001 RE001, DP001, DP003, DP004, DP007, DS001, CC001, CE001, CA001, SI001, AM001
Corrosion, Durability and Life Extension techniques • GE009, CC001
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
8
Organisation Capability areas Specific courses offered APGA competency contributed to**
Email: [email protected] Operational Asset Management • AM002, AM003, AM008
University – under graduate and post graduate level
Various engineering faculties See separate table with University undergraduate courses
International
Tiratsoo Technical/Clarion Technical Conferences www.clarion.org/ http://www.tiratsootechnical.com/
Australian contact:
Lyndsie Clarke GPO Box 4967 Melbourne VIC 3001 Tel: 03 9248 5100 Fax: 03 9602 2708 Email: [email protected]
Offshore and onshore Pipeline engineering
• Introduction/fundamentals: Onshore pipeline engineering • GE001, GE009, GE012, IB001, IB002, IB003, IB004, CC001, CC002, CC003, CC004, CC005, CC006, CC007, DP001. DP002, DP003, DP007, DP012, DP010, DP004, DP014, W001, W004, W006, RE001 RE002, RS002, EA001, EA002, HC001, HC002, SI001, SI002, DS004, DS005, DS006, OP002, OP003, OP022, IC004, RS003, RS005, RS006, SP001, SP002, AM013, AM014, AM016
• Pipeline Integrity Management • AM001, SI001, SI002, AM001, AM002, AM013, AM015, AM016, CC007, SP001, SP002
• Pipeline Pigging and In-line Inspection • OP014, SI001, SI002, AM001, DPO12
• Practical Pigging Operations • OP014
• Pipeline Defect Identification and Sizing • SI002
• Defect Assessment in Pipelines • SI002
• Defect Assessment Calculations Workshop • SI002
• Excavation, Inspection & Applied NDE for Pipeline Integrity Assessment
• OP006, OP007,,SI002
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
9
Organisation Capability areas Specific courses offered APGA competency contributed to**
• Stress Corrosion Cracking • CC004
• Microbiological corrosion in pipelines • CC004
• Pipeline Transportation of Carbon Dioxide Containing Impurities
• N/A
• Pipeline Repair Methods • OP008
• Performing Pipeline rehabilitation • N/A
• Pipeline Risk Management • RS001, RS003
• Pipeline Risk Management and Assessment • RS001, RS002, RS003, AM013, AM015, AM016
• Introduction/fundamentals/ Subsea Pipeline Engineering • TBA
• Inspection of Subsea Pipelines • TBA
• Subsea Production Systems Engineering • TBA
• Deepwater Riser Engineering • TBA
• Pipeline Integrity Master Class • AM series, SI series, RS series – In-depth course
Northumbria University, UK (with Penspen Integrity) http://www.northumbria.ac.uk/?view=CourseDetails&code=DTPPI
Pipeline Integrity Engineering
Pipeline Integrity Management Postgraduate Certificate, Diploma and Masters
• Module VAL340 - Integrity Assessments
• SI001, SI002, OP006, OP008, OP014, DP014, DP017, RS001, RS003, RS006
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
10
Organisation Capability areas Specific courses offered APGA competency contributed to**
M6 • Module VAL341 – Land Pipeline Engineering • GE002, IB002, IB004, RS001, RS002, EH001, EH005, EA001, EA002, DP002, DP003, DP005, DP006, DP007, DP008, DP009, DP010, DP011, DP012, DP013, DP014, DP016, DP019, CE001, CC001, CC002, CC003, CC004, CC005, CC006, CC007, W001, W004, W006, RE001, RE002, CE001, HC001, HC002, PM001, PM002, PM004, PM008, OP003, OP006, OP007, OP008, OP014, OP0015, OP016, OP017, RSOP022, SI002, RS003, AM013, AM015, AM016
• Module VAL342 – Pipelines Risk
• RS001, RS003, RS005, RS006, SP001, SP002
• Module VAL343 – Materials Technology
• W001, WW006, W004, CC001, CC002, CC004, CC005, SI001, SI002
• Module VAL344 – Geohazards and Pipelines • RE001, RE006, GE013, CE007, SI001, SI002, DP010, DP013, DP021
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
11
Organisation Capability areas Specific courses offered APGA competency contributed to**
IBC Global Academy www.informaglobalevents.com/event/pipeline-engineering-distance-learning
Pipeline Engineering
Pipeline engineering (On-line 12 week course) covering:
• Introduction to Pipeline Engineering
• Material Selection and Corrosion Control
• Pipeline Design, Installation and Construction
• Pipeline Hydraulic Analysis
• Defect Assessment on Pipelines
• Pipeline Integrity: Maintenance, Inspection and Risk Assessment
• GE002, IB002, DP002, DS002, RE001
• DP005, DP008??, CC001 – CC007
• DP series, DS series, RE series, CE series - selected
• DP003, DP004
• SI001 – 3
• SI001 – 4, AM series, RS series - selected
DNV www.dnv.com.au/services/training/industries/energy
Safety and risk management Offshore Pipeline Engineering
• HAZOP method and leader course • RS005
• Pipeline Overview • TBA
• Pipeline Design • TBA
• Pipeline Global Buckling • TBA
• Pipeline Freespan • TBA
• Pipeline On-Bottom Stability • TBA
• Pipeline PIM Offshore • TBA
• Environmental Conditions and Loads • TBA
University of Newcastle-on Tyne www.ncl.ac.uk/marine/postgrad/taught/pipeline.htm
Masters in Pipeline Engineering
Masters in Pipeline Engineering covering
• Safety, Risk & Environmental Management
• RS series, EH series - selected
• Hydrocarbon Production & Process Engineering • IB003
• Materials and Fabrication • DP008, DS002, W001
• Corrosion and Corrosion Control • CC series - selected
• Fundamentals of Pipeline Engineering • GE002, IB001, DP002, DS001, DS002, RE001, RS series - selected
• Pipeline Structural Analysis • GE013, DP002, DP007, other DP series
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
12
Organisation Capability areas Specific courses offered APGA competency contributed to**
• Dynamics of Offshore Installations • TBA
• Design and Construction • DP series, DS series, CE series, RE series - selected
• Asset Management • AM series, SI series
• Elements of Economics & Business Finance • CA series
• Civil and Geotechnical Aspects of Pipeline Engineering • DP series, RE001, RE006
• Pipeline Engineering Project • CE series, PM series
University of Calgary – Pipeline Engineering Center schulich.ucalgary.ca/PEC/
Masters and PhDs in Pipeline Engineering Short Courses
Masters & PhD subjects
• Engineering Integrity Management Programs and Systems
• AM002, AM008, AM003
• Vibrations in Pipeline Systems • DP007, DP017, DP012
• Stress Corrosion Cracking behaviour of Materials • CC004
• Corrosion Science in the Pipelines Industry • CC series - selected
• Fundamentals of Hydraulics in Gas Pipeline Systems • DP003, DP004
• Welding Metallurgy and Design • W series
• Fundamentals of Pipeline Economics • CA003
• Pipeline Coatings • CC003
• Fundamentals of Pipeline Design, Construction and Operation
• IB002, DP002, DS001, RE001, CE001, OP001
• Structural Analysis of Buried Steel Pipelines • GE013, DP006, DP013
• Theoretical and Practical Aspects of Piping Stress Analysis
• DP013
• Fundamentals of Liquid Hydraulics in Pipeline Systems • DP003, OP022
• Failure and Fracture Mechanics in the Pipelines Industry • DP014
•
• Geomatic Engineering of Pipeline Systems •
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
13
Organisation Capability areas Specific courses offered APGA competency contributed to**
• Pump and Compressor Stations •
Short Courses:
• Fundamentals of pipeline design, construction and operation (3-day course)
• GE001, IB002, DP002, DS001, RE001, CE001, OP001
• Fundamentals of pipeline design (1-day course) • GE001, DP002, DS001, RE001, RS001
• Pipeline Project Execution, Construction and Operations (2-day course)
• CE001, PM001, OP001, AM003
• Applications of remote sensing technologies • RE005
• Overview of stress and strain in pipeline facilities • DP013, DS003
• Design of pipelines for geometrical hazards and solving soil-pipe interaction problems
• DP013, DP021
• Pulsation and vibration control in pipeline networks • DP013, DP017
• Design, operation and maintenance of pipeline pump and compressor stations
• DS002, DS003, DS004, DS005, DS006, DS007
• Natural gas gathering pipeline systems process design and operation
• N/A
• Hydrogen pipelines • N/A
• Machinery troubleshooting, failure causes, and monitoring • OP011
Pontifical Catholic University Rio De Janiero (Portugese) www.puc-rio.br/sobrepuc/depto/
Undergraduate and graduate programs
Course modules
• Mechanical Design
• Some of DP & DS series
• Pipeline Hydraulics • DP003, DP004
• Topics in Pipeline Design • DP, DS & RE series - selected
• Pipeline Structural Integrity • SI001, SI002
• Topics in Pipeline Operation • OP series - selected
• Topics in Pipeline Construction, Installation, and Maintenance
• DP, DS, RE, CE, PM, AM series - selected
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
14
Organisation Capability areas Specific courses offered APGA competency contributed to**
AVANS (Dutch) www.pipeliner.nl/startEN.html
Master of Pipeline Technology
• Transport Technology and Lifecycle of a Pipeline Transport System
• IB001, plus
• Operational Use and Quality Control of a Pipeline Transport System
• OP & AM series - selected
• Engineering Calculations and Quality Assurance of a Pipeline Transport System
• DS series plus – selected
• Maintenance and Quality Improvement of a Pipeline Transport System
• AM, SI series - selected
•
• Execution and Quality Warranty of a Pipeline Transport System
• OP, AM and IS series - selected
• Management and Administration aspects • CA series - selected
• Civil Law, Regulations and Permits aspects • IB004
• Risk and Safety interaction with the surrounding aspects • RS series - selected
• Environment Effects and Durability aspects • EH series - selected
• Quality Systems, Quality Control and Supervision aspects • AM series - selected
ASME www.asme.org/kb/courses
Various relevant to Pipeline Engineering
Selected key courses:
• PD014 – B31.3 Process Piping Design
• DS003
• IPTI-210 – Pipeline Engineering: Integrity Management Self-Study Course
• SI001, SI002, SI003, SI004, CC007
• PD370 – B31.8 Gas Transmission and Distribution Piping Systems
• DP002, DP and SI series - selected
• PD391 – B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids
• DP – selected, CE, SI, OP & AM Series
• IPTI-200 – Pipeline Engineering: Design, Construction and Assessment
• DP, CE, SI, OP & AM series - selected
• IPTI-220 – Pipeline Engineering: In-line Inspection • OP014, SI001, SI002
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
15
Organisation Capability areas Specific courses offered APGA competency contributed to**
• PD457 – Process Piping Materials, Fabrication, Examination and Testing
• DS003, CE013
• PD581 – Piping Design, Fabrication and Testing Combo • DS003, CE013
• PD593 – FRP Piping Fabrication and Installation Processes
• TBA
• PD617 – Design of Buried High Pressure Polyethylene (HDPE) Piping Systems
• TBA
• PD398 – Operation, Maintenance and Repair of Plant Piping Systems
• AM011, OP020
• PD410 – Detailed Engineering of Piping Systems • DS003
• PD445 – Piping Fabrication and Examination • CE013
• IPTI240 – Design, Operation and Maintenance of Gas Turbines
• DS004, AM012, OP011
• IPTI290 – Reliability Improvement of Rotating Equipment • AM012
• IPTI270 – Stress Corrosion Cracking • CC004
• IPTI 280 – Defect Assessment • SI002
Penspen Integrity www.penspen.com/Services/Training/Courses/Pages/Home.aspx
Onshore and Offshore Pipeline Engineering
• Pipeline Defect Assessment (PDAC) & PDAC via Online Distance Learning
• GE002, DP013, RE001, SI001, SI002, OP014, RS003, OP006, OP007, OP008
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
16
Organisation Capability areas Specific courses offered APGA competency contributed to**
• Onshore Pipeline Engineering • GE003, GE012, IB001, IB003, RS001, DP008, W006, IB004, IB002, DP002, DP007, DP010, DP012, DP003, DP004,DP014, W001, W002, W004, RE001, RS002, , EA001, EA002, CE001, CC001, CC002, CC003, CC004, CC005, CC006, CC007, HC001, HC002,OP003, OP006, OP007, OP0087, OP014, OP022, IC004, SI001, SI002, PM001, PM003, PM004,PM008, PM007, PM011, DSA001, DS004, DS005, DS006, RS003, RS005, RS006
• Practical Pipeline Pigging Programme • DP012, DP014
• Pipeline Risk Assessment & Management • RS001, RS003, RS005, RS006, AM016, SP001, SP002,
Technical Toolboxes www.ttoolboxes.com/Training/
General and pipeline engineering
Selected key relevant courses
• Horizontal Directional Drilling for Utility and Pipeline Application
• CE009
• Pipeline Crossings – Practices and Procedures • DP010, CE006
• Project Management – From Concept and Design through Completion
• PM001 – PM015
• Cathodic Protection Design for Pipelines and Storage tanks
• CC001, CC002, CC003, CC004
• Internal corrosion and its Control in the Oil and Gas Industry
• CC001, CC004
• Understanding Pipeline AC Interference and Mitigation • CC006
• DC Stray Current Interference and Measures to Cope with it
• CC006
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
17
Organisation Capability areas Specific courses offered APGA competency contributed to**
• Steel Pipe: Metallurgy, Manufacturing, Construction, Degradation and Assessment
• DP001, W006, SI002
• Understanding Coatings, Corrosion Control, on Underground and Ambient Exposed Pipe
• CC001, CC002, CC003
• Understanding the Pipeline MOP/MAOP Integrity Verification Process
• AM013
• RSTRENG Remaining Strength of Corroded Pipeline • SI002
• Stress Corrosion Cracking (SCC) has no borders • CC004
• Understanding Pip Leak Detection Technologies – An overview of Regulations, Standards, Requirements Design and Operations
• IC008, OP016
Offshore Pipeline Engineering Non-university courses
Jee training services +44 (0)1723 371 391 [email protected]
Subsea engineering • Integrity management of subsea pipelines • OAM001, OAM002, OAM003,
• Introduction to decommissioning in the North Sea • OAM008
• Subsea controls • ODP012
• Risers, umbilicals and flexibles • ODR001, ODR002
• Subsea systems • ODP012
• Planning, execution and managing decommissioning projects in the North Sea
• OAM008
• Pigging and unplugging • OAM007, OFA001
• Design of subsea pipelines • ODP001
• Construction of subsea pipelines • OCE001
• Advanced design including HP/HT and deepwater pipelines
• ODP001, ODP006, ODP010
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
18
Organisation Capability areas Specific courses offered APGA competency contributed to**
WTIA Unit 50, 8 Avenue of the Americas Newington NSW 2127 Tel: 02 9748 4443 Fax: 02 9748 2858 Email: N/A
www.wtia.com.au
• SWT-56 Subsea Pipeline Engineering (Not currently offered)
• ODP001
Society of Underwater technology Events Assistant - Corelle Charles, [email protected] Office Suite 11 17 Prowse Street West Perth Western Australia 6005 T: +61 (0) 8 9481 0999
Subsea technology • Operating Subsea Oil and Gas Production Systems • OGE004
• Metocean Awareness Course • ODP004
• Life Cycle of Flexible Risers and Flow lines • ODP014, ODR001, ODR002, OCE005
• Subsea Awareness Course • OGE004
• Introduction to Materials and Corrosion Course • OCC001
• Introduction to Positioning and Survey Course • ODP005, OCE001
• Achieving Reliable Subsea Systems Course • OGE004, OAM004
• Offshore Geohazards and Geotechnics: Risks and Opportunities Cpourse
• ODP003
American Society of Mechanical Engineers
Pipeline engineering and mechanical engineering
• IPTI265 – Pipeline Engineering: Offshore Design and Construction
• ODP001, OCE001,
• IPTI230 – Subsea Pipeline Design Overview • ODP001
• IPTI110 – Fundamentals of Deepwater Riser Engineering • ODR001
Penspen Integrity www.penspen.com/Services/Training/Courses/Pages/Home.aspx
Pipeline engineering • Subsea Pipeline Engineering • OGE002, ODP001, FA001, OCC001, ORS001, ODR001, OCE001
• Offshore & Onshore Pipeline Legislation • OGE004
DNV www.dnv.com.au/services/training/industries/energy
Safety and risk management Offshore Pipeline Engineering
• HAZOP method and leader course • RS005
• Pipeline Overview • OGE002
• Pipeline Design • ODP001
• Pipeline Global Buckling • ODP010
Pipeline Engineer Training Courses
**Note: APGA has used information available to it to make assessments of the competencies courses are likely to cover some, or all, of the knowledge elements in the APGA Pipeline Engineering Competency Standards. In some cases information available is limited. Accordingly, this document should be used as a guide only, and individuals and companies should obtain course outlines to determine the extent to which any course will meet the requirements of any competency after making proper reference to the APGA Pipeline Engineering Competency Standards.
19
Organisation Capability areas Specific courses offered APGA competency contributed to**
• Pipeline Freespan • ODP006
• Pipeline On-Bottom Stability • ODP007
• Pipeline PIM Offshore • OAM001, OAM002
• Environmental Conditions and Loads • ODP003, ODP004