Piping System – Tube Fittings - … Fittings.pdf · · 2014-06-13Based Standard DIN 3851 DME-DIV. DIN fittings ... Pressure and temperature load Capability Steel Brass ... •

Piping System – Tube Fittings

Piping System, Power Transmission, Forging and Casting Products

TEL:86-411-2490707 2490808 FAX:86-411-2483355 http://www. dmechina.com

Information for DIN 2353

General Based Standard DIN 3851 DME-DIV. DIN fittings have been improved to comply with current standard requirements. They conform to installation standard DIN 2353 and all of their constituent parts are in terchangeable with competitor products provided they comply to the basic standard requirements as applicable. Our production facilities have many years of experience in the manufacture of precision products which in conjunction with stringent quality control from the starting material up to the finished component de termines the quality of HYUPDONG fittings. Fitting materials Hy-Lok Corp. Fittings are machined from drawn steel bar or steel forgings. Materials according to DIN 3859 (technical specifications for tube fittings). Nuts are either cold or hot pressed. Fittings made of stainless steel. X6CrNiMoTil 7122 to DIN 17440, material No,1,4571,is also available for supply. caution! Theuse of steel is permissible up to 120℃ max. For any temperature higher than 120℃, use material 1,4571. Pressure and temperature load Capability Pressure specification The pressure specifications, given in our catalogue relate to steel fittings with a static load at a temperature up to 120℃ and refer to l Nominal pressure(PN)acc, to DIN 2401.

The rated pressure has a safety factor of 4(DIN 3859)

l Permissible working pressure (PB) of the operating pressure acc, to DIN 2401. The security factor for PB is 2,5 of 1,5 respectively.

Pressure Ranges Steel/Brass* 1,4571(ss316)

Series Size Pressure Size Pressure

LL 4-8 100 bar 4-8 100 bar

6-18 315 bar 6-15 250 bar

- - 18-22 160 bar L

22-42 160 bar 28-42 100 bar

6-14 630 bar 6-14 630 bar

16-30 400 bar 16-25 400 bar S

38 315 bar 30-38 315 bar

Brass*: Pressure range of brass should be adapted 30% below of the steel

Caution! For certain types of fittings the nominal pressure differ from those shown above, in which case the ratings indicated for the individual types should be observed! Allowable working temperatures (TB) A)For fittings materials

Material Temperature

Steel -40℃ up to +120℃ (DIN 3859)

Brass -60℃ up to +175℃

Stainless Steel -60℃ up to +400℃(DIN 17440)

Please refer to the information given in the section “Reduction of Pressure” B)For seal –materials

Material Temperature

NBP(e.g.Perbunan) -35℃ up to +100℃

FPM(e.g.Viton) -25℃ up to +200℃

PTFE(e.g.Teflon) -60℃ up to +240℃

Caution! If different fitting and sealing material are used, the lowest temperature as indicated for each material is applicable! Pressure reduction with temperature The following reduction of pressure compared with the catalogue specification for higher temperatures.

Materials

of fittings Temperature range

Reduction

of pressure

Steel -40℃ up to +120℃ -

Brass -60℃ up to +175℃ 30%

1.4571 -60℃ up to +20℃ -

1.4571 -60℃ up to +50℃ 4%

1.4571 +100℃ 11%

1.4571 +200℃ 20%

1.4571 +300℃ 29%

1.4571 +400℃ 33%

For different material of tubes and fittings. The tubes must be tested separately concerning the allowed temperature range and the necessary reduction of pressure. Surface protection All ranges fittings are galvanized and yellow passivated. All weldable fittings are phosphated. Nikel-plated on request for carbon steel. Fluids Hy-Lok Corp. DIN fittings are designed for the use of commercial hydraulic oils. If special fluids please contact our application engineers.




Ordering Information Example 1, Tube to Tube connection

DT 12 S S316

①

-

②

③

-

⑥

Example 3, Tube to Tube Port DEW 16 S S316

①

-

②

③

-

⑥

Example 5, Banjo Fitting DWH 16 S 04G S316

①

-

②

③

-

④

-

⑥

Example 2, Tube to Tube connection DMC 10 L 02G ED S316

①

-

②

③

-

④

⑤

-

⑥

Example 4, Tube Port to Female Port DMGE 16 S 04G ED STEL

①

-

②

③

-

④

⑤

-

⑥

Example 6, Male / Female Adapter MFAE 04G-03G STEL

①

④

-

⑥

① Name of Fitting ② Tube O.D ③ Series ④ Thread Connection ⑤ Elastomer Seal ⑥ Material

: : : : : :

“Refer to Index” See Tube O>D Designator See Series Designator See Thread Designator ED-Ring (Refer to seal materials) See Material Designator

· Tube O.D Designator · Series Designator

Tube O.D 4mm 6mm 8mm ⋯⋯ 38mm 42mm Series Very Light Light Heavy

ldentifier 04 06 08 ⋯⋯ 38 42

ldentifier LL L S

· Thread Designator (Pipe· Thread)

Nominal size 1/8″ 1/4″ 3/8″ 1/2″ 3/4″ 1″ 1 1/4″ 1 1/2″

ANSL/ASME B1.20.1 NPT 01N 02N 03N 04N 06N 08N 10N 12N

DIN-ISO228(DIN 259)

BSP/Parallel 01G 02G 03G 0G 06G 08G 10G 12G

Lden

fifie

r

DIN-2999

BSP Tapered 01R 02R 03R 04R 06R 08R 10R 12R

· Thread Designator (Metric Thread)

Metric Size M8×1.0 M10×1.0 M12×1.5 M14×1.5 ⋯⋯⋯ M27×2.0 M33×2.0 M42×2.0 M48×2.0

DIN158

Taper (Keg) M8K M10K M12K M14K ⋯⋯⋯

Lden

fifie

r

DIN-13

Paraller M8 M10 M12 M12 ⋯⋯⋯ M27 M33 M42 M48

· Thread Designator (Unified)

Size 7/16-20UNF 9/16-18UNF 3/4-16UNF 7/8-14UNF 1 1/16-12UN 1 /5/16-12UN 1 5/8-12UN

ldentifier 04U 06U 08U 10U 12U 16U 20U

· Material Designator

Stainless Steel Meterial Carbon Steel (DIN 3859)

DIN 17440/1,4571 ASTM A479 TYPE 316 Brass

ldentifier STEL 4571 S316/316L BRAS

O.D




Tubing guide <seamless precision steel tube st 37.4 We recommend the use of seamless precision steel tubes with dimensions to DIN 2391, part 1, material St 37.4 to DIN 1630, type NBK. The following tube wall thickness are suitable for use:

Design Pressure DIN 2413

Tube O.D (D)

Tolerance Wall*

Thickness (t)

Weight I Ⅲ

mm mm mm kg/m bar bar 4 4 4

±0.1 0.5

0.75 1

0.047 0.060 0.074

313 409 522

274 391 500

6 6 6 6 6

±0.1

·0.75 1

1.5 2

2.25

0.103 0.123 0.166 0.197 0.208

333 389 549 692 757

289 372 526 662 725

8 8 8 8

±0.1 1

1.5 2

2.5

0.173 0.240 0.296 0.339

333 431 549 658

288 412 526 630

10 10 10 10 10

±0.1

1 1.5 2

2.5 3

0.222 0.314 0.395 0.462 0.518

282 373 478 576 666

248 357 458 551 638

12 12 12 12 12

±0.08

·1 1.5 2

2.5 3

3.5

0.271 0.389 0.493 0.586 0.606 0.734

235 353 409 495 576 651

209 303 391 474 551 624

15 15 15 15 15

±0.08

·1 1.5 2

2.5 3

0.345 0.499 0.641 0.771 0.888

188 282 336 409 478

171 248 321 391 458

16 16 16 16 16

±0.08

·1 1.5 2

2.5 3

0.370 0.536 0.691 0.832 0.962

176 264 353 386 452

160 234 303 370 433

18 18 18 18 18

±0.08

·1 1.5 2

2.5 3

0.419 0.610 0.789 0.956 1.110

157 235 313 348 409

143 209 273 333 391


Tube Tolerance

Wall* Thickness

I Ⅲ mm mm mm kg/m bar bar 20 20 20 20 20 20

±0.08

·1.5 2

2.5 3

3.5 4

0.684 0.888 1.08 1.26

1.424 1.578

212 282 353 373 426 478

191 249 303 357 408 458

22 22 22 22 22

±0.08

·1 1.5 2

2.5 3

0.518 0.758 0.986 1.202 1.406

128 192 256 320 343

118 174 227 278 328

25 25 25 25 25 25

±0.08

2 2.5 3 4

4.5 5

1.134 1.387 1.628 2.072 2.275 2.466

226 282 338 394 437 478

201 248 292 378 418 458

28 28 28 28 28

±0.08

1.5 2

2.5 3 4 5

0.980 1.282 1.572 1.850 2.368 2.836

151 201 252 302 357 434

139 181 223 264 342 415

30 30 30 30 30

±0.08

·2 2.5 3 4 5

1.381 1.695 2.00 2.57 3.08

188 235 282 336 409

171 210 248 321 391

35 35 35 35 35 35

±0.15

2 2.5 3 4 5 6

1.63 2.00 2.37 3.06 3.69 4.29

161 201 242 322 357 419

147 181 215 280 342 401

38 38 38 38 38 38

±0.15

·2.5 3 4 5 6 7

2.189 2.589 3.35 4.07 4.74 5.35

186 223 297 332 390 446

168 200 260 318 373 427

42 42 42

±0.2 ·2

3 4

1.973 2.89 3.75

134 201 269

124 181 237

• Reinforce tube inserts are recommended where thin walled tubes are subject to severe strains. *permissible variation in wall thickness (DIN 2391) <Calculation Pressures:· Calculated pressures to DIN 2413 part 1 for

primarily static load conditions. · Yield point (K): 235 N/mm2 (to DIN 1630) · Safety factor (S): 1.5 · Allowance factor (c)

P=20*k*t*c

S*D (bar)

· Calculated pressures to DIN 2413 PART Ⅲ for dynamic load conditions

· Yield point (K) : 225 N/mm2 (DIN 2413 4.2.8) · Safety factor (S) :1.5

P=20*k*t*c

S*(D+t*c)(bar)

Factor for consideration of wall thickness divergence for static and dynamic stress Tube Range 4mm/5mm 6mm/8mm Larger

Factor(c) 0.8 0.85 0.9

<Note: For a diameter ratio of O.D/1.D>1.35, calculation made to DIN 2413 part Ⅲ and based on a pulsating fatigue limit of 235 N/mm2

<Temperature range : -40℃ to +120℃ without reduction in pressure.

O.D (D)

Thickness (t)

Weight




<seamless precision stainless steel 1.4571 Stainless steel tubes (e.g. 1.4571), code X6CrNiMoTi 17122, must be cold-drawn and seamless, heat –treated without formation of scales, type m to Din 17458, provide tolerances to DIN 2391, Part 1. The following tube wall thickness are suitable for use :


Tube O.D (D)

Tolerance Wall*

Thickness (t)

Weight I Ⅲ

mm mm mm kg/m bar bar 4 4

±0.1 0.75 1

0.061 0.075

391 500

376 480

6 6 6 6

±0.1

1 1.5 2

2.5

0.125 0.168 0.200 0.211

372 526 662 725

357 505 637 696

8 8 8 8

±0.1

1 1.5 2

2.5

0.175 0.244 0.300 0.344

347 412 526 630

277 396 505 604

10 10 10 10 10

±0.1

1 1.5 2

2.5 3

0.225 0.319 0.401 0.469 0.525

294 357 458 551 638

238 343 439 529 612

12 12 12 12 12 12

±0.08

·1 1.5 2

2.5 3

3.5

0.275 0.394 0.501 0.594 0.615 0.744

245 368 391 474 551 624

201 291 376 455 529 599

15 15 15 15

±0.08

1 2

2.5 3

0.507 0.651 0.782 0.901

294 321 391 458

238 309 376 439

16 16 16

±0.08 2

2.5 3

0.701 0.845 0.977

368 370 433

291 355 416

18 18 18 18

±0.08

·1.5 2

2.5 3

0.620 0.801 0.967 1.126

245 327 333 391

201 262 320 376


Tube Tolerance

Wall* Weight

I Ⅲ mm mm mm kg/m bar bar 20 20 20 20

±0.08

2.5 3

3.5 4

1.095 1.277 1.443 1.600

368 357 408 458

291 343 392 439

22 22 22

±0.08 ·2 2.5 3

1.002 1.220 1.426

267 334 328

218 267 315

25 25 25 25 25 25

±0.08

?2 2.5 3 4

4.5 5

1.152 1.408 1.635 2.092 2.307 2.501

235 294 353 378 418 458

193 238 281 363 402 439

28 28 28 28 28

±0.08

2 2.5 3 4 5

1.302 1.594 1.874 2.402 2.876

210 263 315 342 415

174 214 253 328 399

30 30 30

±0.08 3 4 5

2.028 2.605 3.400

294 321 391

238 309 376

35 35 35 35 35 35

±0.15

2 2.5 3 4 5 6

1.644 2.018 2.392 3.086 3.742 4.351

168 210 252 336 342 401

141 174 206 269 328 385

38 38 38 38

±0.15

4 5 6 7

3.405 4.131 4.807 5.426

309 318 373 427

249 305 358 410

42 42

±0.2 3 4

2.930 3.798

210 280

174 227

• Reinforce tube inserts are recommended where thin walled tubes are subject to severe strains. *permissible variation in wall thickness (DIN 2391) <Calculation Pressures:· Calculated pressures to DIN 2413 part 1 for

primarily static load conditions. · Yield point (K): 235 N/mm2 (to DIN 1630) · Safety factor (S): 1.5 · Allowance factor (c)

P=20*k*t*c

S*D (bar)

· Calculated pressures to DIN 2413 PART Ⅲ for dynamic load conditions

· Yield point (K): 225 N/mm2 (DIN 2413 4.2.8) · Safety factor (S): 1.5

P=20*k*t*c

S*(D+t*c)(bar)

Factor for consideration of wall thickness divergence for static and dynamic stress Tube Range 4mm/5mm 6mm/8mm Larger

Factor(c) 0.8 0.85 0.9

<Note: For a diameter ratio of O.D/1.D>1.35, calculation made to DIN 2413 part Ⅲ and based on a pulsating fatigue limit of 235 N/mm2

< Temperature range : -60℃ to +400℃. Reduction in pressure for higher temperatures (See page 1)

Thickness (t)

O.D (D)




Stud Ends & Tapped Hole Forms for tube Fittings This standard specifies dimensions for stud ends and tapped holes with metric fine pitch thread and pipe thread for use with compression fittings, valves and screw plugs general outlay of types.

<Forms of Stud Ends Form A (DIN3852 Part 1+2) With sealing by washer

Form B (DIN3852 Part 1+2) With sealing by compression

Form C (DIN3852 Part 1+2) With sealing in tapered thread

Form E (DIN3852 Part 11) With sealing in DIN3869 RING SEALS (*ED-Ring)

Form F (DIN3852 Part 3) With sealing by *O_Ring

Thread size for Form A,B

and E,F

stud ends

d1

Form C

stud ends

d2

d3 d40

-0.2 d5±0.1

M8×1.0 M8×1.0 keg - - 10.9

M10×1.0 M10×1.0 keg 14 13.9 12.9

M12×1.5 M12×1.5 keg 17 16.9 16.9

M14×1.5 M14×1.5 keg 19 18.9 18.9

M16×1.5 M16×1.5 keg 21 21.9 20.9

M18×1.5 M18×1.5 keg 23 23.9 22.9

M20×1.5 M20×1.5 keg 25 25.9 24.9

M22×1.5 M22×1.5 keg 27 26.9 26.9

M26×1.5 - 31 31.9 30.9

M27×2.0 - 32 31.9 31.9

M33×2.0 - 39 39.9 37.9

M42×2.0 - 49 49.9 47.947.9

M48×2.0 - 55 54.9 54.9

G 1/8 1/8 NPT 14 13.9 -

G 1/4 1/4 NPT 18 18.9 -

G 3/8 3/8 NPT 22 21.9 -

G 1/2 1/2 NPT 26 26.9 -

G 3/4 3/4 NPT 32 31.9 -

G 1 1 NPT 39 39.9 -

G 1 1/4 1 1/4 NPT 49 49.9 -

G 1 1/2 1 1/2 NPT 55 54.9 -

7/6-20UNF R 1/8 keg - - 14.4

9/6-18UNF R 1/4 keg - - 17.6

3/4-16UNF R 3/8 keg - - 22.3

7/8-14UNF R 1/2 keg - - 25.5

1 1/6-12UN R 3/4 keg - - 31.9

1 5/6-12UN R 1 keg - - 38.2

1 5/8-12UN R 1 1/4 keg - - 47.7

- R 1 1/2 keg - - -

*ED-Ring & O-Ring Seals made of NBR Standard(-20°C to 90 C) Available made of Viton Upon Request(-20 C to 200 C)




<Forms of Tapped Holes Form X (DIN 3852 Part 1+2) for parallel Stud Ends.( Form A,B ) *d7 is for Stud Ends Form E

Form W (DIN 3852 Part 3) for Stud Ends with O-Ring.(Form F)

Form Z (DIN 3852 Part 1+2) for tapered thread Stud Ends.

Thread size for

Form X,W

Tapped Holes

d1

Form Z

Tapped Holes

d2

d6

min d7

a1

max a2.0

+0.4

b1

min

b2

min

b3

min a±1°

M8×1.0 M8×1.0 keg 13 - 1.0 1.6 - 10.0 5.5 12

M10×1.0 M10×1.0 keg 15 15 1.0 1.6 8 10.0 5.5 12

M12×1.5 M12×1.5 keg 18 18 1.5 2.4 12 11.5 8.5 12

M14×1.5 M14×1.5 keg 20 20 1.5 2.4 12 11.5 8.5 15

M16×1.5 M16×1.5 keg 22 23 1.5 2.4 12 13.0 8.5 15

M18×1.5 M18×1.5 keg 24 25 2.0 2.4 12 14.5 8.5 15

M20×1.5 M20×1.5 keg 26 27 2.0 2.4 14 14.0 10.5 15

M22×1.5 M22×1.5 keg 28 28 2.5 2.4 14 15.5 10.5 15

M26×1.5 - 32 33 2.5 3.1 16 16.0 - 15

M27×2.0 - 33 33 2.5 3.1 16 19.0 - 15

M33×2.0 - 40 41 2.5 3.1 18 19.0 - 15

M42×2.0 - 50 51 2.5 3.1 20 19.5 - 15

M48×2.0 - 56 56 2.5 3.1 22 22 - 15

G 1/8 1/8 NPT 15 15 1.0 - 8 - 6.9 -

G 1/4 1/4 NPT 19 20 1.5 - 12 - 10.0 -

G 3/8 3/8 NPT 23 23 2.0 - 12 - 10.3 -

G 1/2 1/2 NPT 27 28 2.5 - 14 - 13.6 -

G 3/4 3/4 NPT 33 33 2.5 - 16 -- 14.1 -

G 1 1 NPT 40 41 2.5 - 18 - 16.8 -

G 1 1/4 1 1/4 NPT 50 51 2.5 - 20 - 17.3 -

G 1 1/2 1 1/2 NPT 56 56 2.5 - 22 - 17.3 -

7/6-20UNF R 1/8 keg 21 - 1.6 2.4 - 11.5 5.5 12

9/6-18UNF R 1/4 keg 25 - 1.6 2.5 - 12.7 8.5 12

3/4-16UNF R 3/8 keg 30 - 2.4 2.5 - 14.3 8.5 15

7/8-14UNF R 1/2 keg 34 - 2.4 2.5 - 16.7 10.5 15

1 1/16-12UN R 3/4 keg 41 - 2.4 3.3 - 19.0 13.0 15

1 5/16-12UN R 1 keg 49 - 3.2 3.3 - 19.0 16.0 15

1 5/8-12UN R 1 1/4 keg 58 - 3.2 3.3 - 19.0 17.0 15

- R 1 1/2 keg - - - - - - 17.0 -




<Recommend tightening torques MA

The table below showns the Nm value for studs with metal seal, form B, DIN 3852 or with captive sealing (ED-Ring) to avoid leakings.

<Sealing of taper thread

Taper threads are not self-sealing. To achieve a leakproof seals, an additional sealant is necessary. A well-established sealing-medium is a PTFE-tape (e.g.Teflon)

<Note:

The quoted flgures relate to fittings out of steel(galvanized) and to counter parts made of steel. ( )* These figured relate to studs with captive sealing ED-Ring. For the Male/Female adapters(MFAD/MFAE), there apply the tightening torques for series “S”

Series Tube O.D Pipe Thread MA (Nm) Metric Thread ISO MA (Nm)

6 G 1/8A 25 M10×1 25

8 G 1/4A 50 M12×1.5 30

10 G 1/4A 50 M14×1.5 50

12 G 3/8A 80 M16×1.5 80

15 G 1/2A 160 M18×1.5 90

18 G 1/2A 105 M22×1.5 160

22 G 3/4A 220 M26×1.5 285

28 G 1 A 370 M33×2.0 425

35 G 1 1/4A 600 M42×2.0 600

L

42 G 1 1 /2A 800 M48×2.0 800

6 G 1/4A 60 M12×1.5 35

8 G 1/4A 60 M14×1.5 60

10 G 3/8A 110 M16×1.5 95

12 G 3/8A 110 M18×1.5 120

14 G 1/2A 170 M20×1.5 170

16 G 1/2A 140 M22×1.5 190

20 G 3/4A 320 M27×2.0 320

(250)* (250)*

25 G 1 A 380 M33×2.0 500

30 G 1 1/4A 600 M42×2.0 600

S

38 G 1 1/2A 800 M48×2.0 800



Assembly Instruction for DIN 2353

This assembly instruction applicable to DIN 2353 fittings shows suitable make-up of fittings into seamless pipe in accordance with DIN 3859. · The design including form A and form B for DIN 3861. · Introducing how to install steel pipe of DIN 2391 part 1 and part 2.

3 Methods might be employed for assembling · Assembly by direct fitting body. · Assembly by using pre-assembly tool. · Assembly of standpipe & cone fitting with O-ring. <Assembly of cutting ring fittings in direct fitting body.

1.0 Saw the tube at right angle. An angular offset of 1/2°in relation to the tube axis is

permissible.

1.0 After clean, lightly deburr tube ends at the inside and autside edge.

1.0 Don’t use a tube cutter because this would cause for mation of considerable burrs and

an angular cut.

Use sawing machine or device instead

2.0. Lubricate thread and inside of fitting body also cutting ring and thread of nut Don’t use

grease.

2.1. Place nut and cutting ring on tube shown. Ensure cutting ring and nut are facing the

right way.

3.0. Press tube into fitting body, up to tube abutment, then hand-tighten the nut.

4.0. Make sure the nut is in hand tight position, them the 1 1/2 turns with wrench by holding

fitting body with a second wrench. (Never turn fitting body, hold body and turn nut)

Caution!

Any deviating number of fighting turns reduces the nominal pressure and the service

life of the fitting and may cause leakages or slipping of the tube.




5.0. Check penetration of cutting edge.

A visible ring of material should fill the space in front of the cutting ring and face.

cutting ring may turn on tube, but should not be capable of axial displacement.

6.0. Each time the fitting is disassembled, the nut must be retightened firmly using the same

toque as required for final assembly.

7.0. Minimum length of straight tube and for tube bends, up to start of the bending radius

must be at least twice(2×H)the nut length (H)

<Assembly of cutting ring fittings in pre-assembly tool.

1.0. In order to ensure positive assembly HMIC DIN fittings should always pre-assembled in

on oiled pre -assembly tool.

For direct assembly, torque-controled assembly or mechanical pre-assembly, which

are also possible.please refer to separate assembly instructions.

2.0. Saw the tube at right angle. An angular offset of 1/2°in relation to the tube axis is

permissible.

2.1. After clean, lightly deburr tube ends at the inside and out side edge.

2.2. Don’t use a tube cutter because this would cause for mation of considerable burrs and

an angular cut.

Use sawing machine or device instead.




3.0. Lubricate thread and inside of fittings body also cutting ring and thread of nut.

Don’t use grease.

3.1. Place nut and cutting ring on tube shown.

Ensure cutting ring and nut are facting the right away.

4.0. Press tube into fitting body, up to tube abutment, then hand-tighten the nut.

5.0. Make sure the nut is in hand tight position, then the 1 1/4 turns with wrench by holding

fitting body with a second wrench(Never turn fitting body, hold body and turn nut)

Caution!

Application of deviating numbers of tightening turns reduces the nominal pressure

rating and the life of the fitting which cause leakage or slipping of the tube.

6.0. Check penetration of cutting edge.

A visible ring of material should fill the space in front of the cutting ring and face.

Cutting ring may turn on tube but should not be capable o axial displacement.

7.0. Tighten nut until a noticeable increase in force is required.

Beyond this point, tighten the nut by 1/4 turn with wrench for final assembly.

Hold fitting body by means of a wrench.

7.1. With unfavorable mounting conditions and great tube dimensions, final assembly must

be completed in via with the fitting body.

Caution!

Any deviating number of tightening turns reduces the nominal pressure and the service

life of the fitting and may cause leakages or slipping of the fitting.




8.0. Each time the fitting is disassembled, the nut must be retightened firmly using the same

toque as reguired for final assembly.

9.0. Minimum length of straight tube and for tube bends, up to start of the bending radius

must be at least twice(2×H)the nut length(H)

<Assembly instruction for standpipe & cone fitting with O-Ring.

1.0. Standpipes are generally supplied with pre -assembled cutting ring

Tighten the nut 1/4 turn with wrench beyond the point of a noticeable increase in force.

Hold fitting body firmly by means of wrench

1.1. With unfavorable mounting conditions and great tube dimensions, final assembly must

be completed in a vice with the fitting body to be subsequently installed.

Caution!



2.0. Oil O-ring

Tighten nut 1/4 of a turn beyond the point of a noticeable increase in force.

Hold fitting body firmly by means of wrench.

2.1. With unfavourable mounting conditions and great tube dimensions, final assembly

must be completed in a vice with the fitting body to be subsequently installed.

Caution!





Bite Type Tube Fitting for DIN 2353

Straight Union DME-DU

Series Part

No.

Tube

O.D H h L ι

LL

very light PN100

DME-DU-04LL

DME-DU-06LL

DME-DU-08LL

DME-DU-10LL

DME-DU-12LL

4

6

8

10

12

10

12

14

17

19

9

11

12

14

17

31

32

35

35

35

12

9

12

12

11

L

light

PN 315

DME-DU-06L

DME-DU-08L

DME-DU-10L

DME-DU-12L

DME-DU-15L

DME-DU-18L

6

8

10

12

15

18

14

17

19

22

27

32

12

14

17

19

24

27

39

40

42

43

46

48

10

11

13

14

16

16

PN 160

DME-DU-22L

DME-DU-28L

DME-DU-35L

DME-DU-42L

22

28

35

42

36

41

50

60

32

41

46

55

52

54

63

66

20

21

20

21

S

heavy

PN 630

DME-DU-06S

DME-DU-08S

DME-DU-10S

DME-DU-12S

DME-DU-14S

6

8

10

12

14

17

19

22

24

27

14

17

19

22

24

45

47

49

51

57

16

18

17

19

22

PN 400

DME-DU-16S

DME-DU-20S

DME-DU-25S

DME-DU-30S

16

20

25

30

30

36

46

50

27

32

41

46

57

66

74

80

21

23

26

27

PN 315 DME-DU-38S 38 60 55 90 29

Union Elbow DME-DL

Series Part

No.

Tube

O.D H h L ι

LL

very light PN100

DME-DL-04LL

DME-DL-06LL

DME-DL-08LL

DME-DL-10LL

DME-DL-12LL

4

6

8

10

12

10

12

14

17

19

9

11

12

14

17

31

32

35

35

35

12

9

12

12

11

L

light

PN 315

DME-DL-06L

DME-DL-08L

DME-DL-10L

DME-DL-12L

DME-DL-15L

DME-DL-18L

6

8

10

12

15

18

14

17

19

22

27

32

12

12

14

17

19

24

27

29

30

32

36

40

12

14

15

17

21

23.5

PN 160

DME-DL-22L

DME-DL-28L

DME-DL-35L

DME-DL-42L

22

28

35

42

36

41

50

60

27

36

41

50

44

47

56

63

27.5

30.5

34.5

40

S

heavy

PN 630

DME-DL-06S

DME-DL-08S

DME-DL-10S

DME-DL-12S

DME-DL-14S

6

8

10

12

14

17

19

22

24

27

12

14

17

17

19

31

32

34

38

40

16

17

17.5

21.5

22

PN 400

DME-DL-16S

DME-DL-20S

DME-DL-25S

DME-DL-30S

16

20

25

30

30

36

46

50

24

27

36

41

43

48

54

62

24.5

26.5

30

35.5

PN 315 DME-DL-38S 38 60 50 72 41




Reducing Union DME-DUR

Tube

O.D Series

Part No.

D1 D2

H1

H2

h

L

ι

L

light

PN315

DME-DUR-08L-06L

DME-DUR-10L-06L

DME-DUR-10L-08L

DME-DUR-12L-06L

DME-DUR-12L-08L

DME-DUR-12L-10L

DME-DUR-15L-10L

DME-DUR-15L-12L

DME-DUR-18L-10L

DME-DUR-18L-12L

DME-DUR-18L-15L

8

10

10

12

12

12

15

15

18

18

18

6

6

8

6

8

10

10

12

10

12

15

17

19

19

22

22

22

27

27

32

32

32

14

14

17

14

17

19

19

22

19

22

27

14

17

17

19

19

19

24

24

27

27

27

40

41

41

42

42

43

45

45

46

46

48

11

12

12

13

13

14

15

15

15.5

15.5

16.5

PN

160

DME-DUR-22L-12L

DME-DUR-22L-15L

DME-DUR-22L-18L

DME-DUR-28L-18L

DME-DUR-28L-22L

DME-DUR-28L-22L

DME-DUR-28L-28L

22

22

22

28

28

35

35

12

15

18

18

22

22

28

36

36

36

41

41

50

50

22

27

32

32

36

36

41

32

32

32

41

41

46

46

48

50

50

52

54

59

59

17.5

18.5

18

19

21

21

21

S

heavy

PN

630

DME-DUR-08S-06S

DME-DUR-10S-06S

DME-DUR-10S-08S

DME-DUR-12S-06S

DME-DUR-12S-08S

DME-DUR-12S-10S

DME-DUR-14S-10S

DME-DUR-14S-12S

8

10

10

12

12

12

14

14

6

6

8

6

8

10

10

12

19

22

22

24

24

24

27

27

17

17

19

17

19

22

22

24

17

19

19

22

22

22

24

24

47

48

48

50

50

51

54

54

18

17.5

17.5

19.5

19.5

19

20.5

20.5

PN

400

DME-DUR-16S-12S

DME-DUR-16S-14S

DME-DUR-20S-10S

DME-DUR-20S-12S

DME-DUR-20S-16S

DME-DUR-25S-16S

DME-DUR-25S-20S

DME-DUR-30S-20S

DME-DUR-30S-25S

16

16

20

20

20

25

25

30

30

12

14

10

12

16

16

20

20

25

30

30

36

36

36

46

46

50

50

24

27

22

24

30

30

36

36

46

27

27

32

32

32

41

41

46

46

54

57

60

60

63

68

71

74

77

20

21.5

22

22

23

25

25.5

26

26.5

PN

315 DME-DUR-38S-30S 38 30 60 50 55 87 29.5




Union Tee DME-DT

Series Part

No.

Tube

O.D H h L ι

LL

very light PN100

DME-DT-04LL

DME-DT-06LL

DME-DT-08LL

DME-DT-10LL

DME-DT-12LL

4

6

8

10

12

10

12

14

17

19

9

9

12

14

14

21

21

23

24

27

11

9.5

11.5

12.5

15

L

light

PN 315

DME-DT-06L

DME-DT-08L

DME-DT-10L

DME-DT-12L

DME-DT-15L

DME-DT-18L

6

8

10

12

15

18

14

17

19

22

27

32

12

12

14

17

19

24

27

29

30

32

36

40

12

14

15

17

21

23.5

PN 160

DME-DT-22L

DME-DT-28L

DME-DT-35L

DME-DT-42L

22

28

35

42

36

41

50

60

27

36

41

50

44

47

56

63

27.5

30.5

34.5

40

S

heavy

PN 630

DME-DT-06S

DME-DT-08S

DME-DT-10S

DME-DT-12S

DME-DT-14S

6

8

10

12

14

17

19

22

24

27

12

14

17

17

19

31

32

34

38

40

16

17

17.5

21.5

22

PN 400

DME-DT-16S

DME-DT-20S

DME-DT-25S

DME-DT-30S

16

20

25

30

30

36

46

50

24

27

36

41

43

48

54

62

24.5

26.5

30

35.5

PN 315 DME-DT-38S 38 60 50 72 41

Union Cross DME-DC

Series Part

No.

Tube

O.D H h L ι

LL

very light PN100

DME-DC-04LL

DME-DC-06LL

DME-DC-08LL

DME-DC-10LL

DME-DC-12LL

4

6

8

10

12

10

12

14

17

19

9

9

12

14

17

21

21

23

24

27

11

9.5

11.5

12.5

15

L

light

PN 315

DME-DC-06L

DME-DC-08L

DME-DC-10L

DME-DC-12L

DME-DC-15L

DME-DC-18L

6

8

10

12

15

18

14

17

19

22

27

32

12

12

14

17

19

24

27

29

30

32

36

40

12

14

15

17

21

23.5

PN 160

DME-DC-22L

DME-DC-28L

DME-DC-35L

DME-DC-42L

22

28

35

42

36

41

50

60

27

36

41

50

44

47

56

63

27.5

30.5

34.5

40

S

heavy

PN 630

DME-DC-06S

DME-DC-08S

DME-DC-10S

DME-DC-12S

DME-DC-14S

6

8

10

12

14

17

19

22

24

27

12

14

17

17

19

31

32

34

38

40

16

17

17.5

21.5

22

PN 400

DME-DC-16S

DME-DC-20S

DME-DC-25S

DME-DC-30S

16

20

25

30

30

36

46

50

24

27

36

41

43

48

54

62

24.5

26.5

30

35.5

PN 315 DME-DC-38S 38 60 50 72 41




Reducing Tee DME-DTR

Tube O.D Series Part No.

D1 D2 D3 H1 H2 H3 h L1 L2 l3 ι1 ι2 ι3

L light PN 316

DME-DTR-06L-06L-08L DME-DTR-08L-08L-06L

6 8

6 8

8 6

14 17

14 17

17 14

14 14

29 29

29 29

29 29

14 14

14 14

14 14

PN 315

DME-DTR-06L-06L-10L DME-DTR-08L-08L-10L DME-DTR-10L-10L-06L DME-DTR-10L-10L-08L DME-DTR-10L-06L-10L

6 8

10 10 10

6 8 10 10 6

10 10 6 8 10

14 17 19 19 19

14 17 19 19 14

19 19 14 17 19

14 14 14 14 14

30 30 30 30 30

30 30 30 30 30

30 30 30 30 30

15 15 15 15 15

15 15 15 15 15

15 15 15 15 15

PN 315

DME-DTR-08L-08L-12L DME-DTR-12L-12L-06L DME-DTR-12L-08L-08L DME-DTR-12L-12L-08L DME-DTR-12L-10L-10L DME-DTR-12L-12L-10L DME-DTR-12L-10L-12L

8 12 12 12 12 12 12

8 12 8 12 10 12 10

12 6 8 8 10 10 12

17 22 22 22 22 22 22

17 22 17 22 19 22 19

22 14 17 17 19 19 22

17 17 17 17 17 17 17

32 32 32 32 32 32 32

32 32 32 32 32 32 32

32 32 32 32 32 32 32

17 17 17 17 17 17 17

17 17 17 17 17 17 17

17 17 17 17 17 17 17

PN 315


10 12 15

1515 15 15

10 12 15 15 12 15 12

15 15 6 10 12 12 15

19 22 27 27 27

2727

19 22 27 27 22 27 22

27 27 14 19 22 22 27

19 19 19 19 19 19 19

36 36 36 36 36 36 36

36 36 36 36 36 36 36

36 36 36 36 36 36 36

21 21 21 21 21 21 21

21 21 21 21 21 21 21

21 21 21 21 21 21 21

PN 315

DME-DTR-12L-12L-18L DME-DTR-18L-10L-10L DME-DTR-18L-18L-10L DME-DTR-18L-18L-12L DME-DTR-18L-18L-15L DME-DTR-18L-10L-18L

12 18 18 18 18 18

12 10 18 18 18 10

18 10 10 12 15 18

22 32 32 32 32 32

22 19 32 32 32 19

32 19 19 22 27 32

24 24 24 24 24 24

39 40 40 40

4040

39 39 40 40 40 39

40 39 39 39 39 40

24 23.5 23.5 23.5 23.5 23.5

24 24

23.5 23.5 23.5 24

23.5 24 24 24 24

23.5

PN 160


22 22 22 22 22 22 22

22 22 15 22 18 22 18

10 12 15 15 18 18 22

36 36 36 36 36 36 36

36 36 27 36 32 36 32

19 22 27 27 32 32 36

27 27 27 27 27 27 27

44 44 44 44 44 44 44

44 44 43 44 44 44 44

43 43 43 43 44 44 44

27.5 27.5 27.5 27.5 27.5 27.5 27.5

27.5 27.5 28

27.5 27.5 27.5 27.5

28 28 28 28

27.5 27.5 27.5

PN 160

DME-DTR-28L-28L-10L DME-DTR-28L-28L-12L DME-DTR-28L-28L-15L DME-DTR-28L-28L-18L DME-DTR-28L-22L-22L DME-DTR-28L-28L-22L

28 28 28 28 28 28

28 28 28 28 22 28

10 12 15 18 22 22

41 41 41 41 41 41

41 41 41 41 36 41

19 22 27 32 36 36

36 36 36 36 36 36

47 47 47 47 47 47

44 47 47 47 47 47

46 46 46 47 47 47

30.5 30.5 30.5 30.5 30.5 30.5

30.5 30.5 30.5 30.5 30.5 30.5

31 31 31

30.5 30.5 30.5

S PN 630

DME-DTR-10S-10S-06S DME-DTR-12S-08S-08S DME-DTR-12S-12S-08S DME-DTR-12S-12S-10S

10 12 12 12

10 8 12 12

6 8 8 10

22 24 24 24

22 19 24 24

17 19 19 22

17 17 17 17

34 38 38 38

34 37 38 38

33 37 37 38

17.5 21.5 21.5 21.5

17.5 22

21.5 21.5

18 22 22

21.5

PN 400

DME-DTR-12S-12S-16S DME-DTR-16S-16S-06S DME-DTR-16S-16S-08S DME-DTR-16S-16S-10S DME-DTR-16S-16S-12S

12 16 16 16 16

12 16 16 16 16

16 6 8 10 12

24 30 30 30 30

24 30 30 30 30

30 17 19 22 24

24 24 24 24 24

42 43 43 43 43

42 43 43 43 43

43 41 41 42 42

25.5 24.5 24.5 24.5 24.5

25.5 24.5 24.5 24.5 24.5

24.5 26 26

25.5 25.5

PN 400

DME-DTR-16S-16S-20S DME-DTR-20S-20S-10S DME-DTR-20S-20S-12S DME-DTR-20S-20S-16S

16 20 20 20

16 20 20 20

20 10 12 16

30 36 36 36

30 36 36 36

36 22 24 30

27 27 27 27

47 48 48 48

47 48 48 48

48 46 46 47

28.5 26.5 26.5 26.5

28.5 26.5 26.5 26.5

26.5 29.5 29.5 28.5

PN 400 DME-DTR-20S-20S-25S DME-DTR-25S-25S-16S DME-DTR-25S-25S-20S

20 25 25

20 25 25

25 16 20

36 46 46

36 46 46

46 30 36

36 36 36

53 54 54

53 54 54

54 52 53

31.5 30 30

31.5 30 30

30 33.5 31.5

PN 400 DME-DTR-25S-25S-30S 25 25 30 46 46 50 41 61 61 62 37 37 35.5




Bulkhead Union DME-DBU

Series Part No. Tube O.D H H1 h L L1 ι ι1 T

L

light

PN

315

DME-DBU-06L

DME-DBU-08L

DME-DBU-10L

DME-DBU-12L

DME-DBU-15L

DME-DBU-18L

6

8

10

12

15

18

14

17

19

22

27

32

17

19

22

24

30

36

17

19

22

24

27

32

42

42

43

44

46

49

22

23

25

25

27

30

27

27

28

29

31

32.5

7

8

10

10

12

13.5

M 12×1.5

M 14×1.5

M 16×1.5

M 18×1.5

M 22×1.5

M 26×1.5

PN 160

DME-DBU-22L

DME-DBU-28L

DME-DBU-35L

DME-DBU-42L

22

28

35

42

36

41

50

60

41

46

55

65

36

41

50

60

51

52

58

59

33

35

40

42

34.5

35.5

36.5

36

16.5

18.5

18.5

19

M 30×2

M 36×2

M 45×2

M 52×2

S

DME-DBU-06S

DME-DBU-08S

DME-DBU-10S

DME-DBU-12S

DME-DBU-14S

6

8

10

12

14

17

19

22

24

27

19

22

24

27

30

19

22

24

27

30

44

44

46

47

50

27

28

31

31

35

29

29

29.5

30.5

32

12

13

14.5

14.5

17

M 14×1.5

M 16×1.5

M 18×1.5

M 20×1.5

M 22×1.5

PN

400

DME-DBU-16S

DME-DBU-20S

DME-DBU-25S

DME-DBU-30S

16

20

25

30

30

36

46

50

32

41

46

50

32

41

46

50

50

55

59

64

35

39

44

48

31.5

33.5

35

37.5

16.5

17.5

20

21.5

M 24×1.5

M 30×2

M 36×2

M 42×2

PN DME-DBU-38S 38 60 65 65 68 53 37 22 M 52×2 Welding Bulkhead Union DME-DBUW

Series Part No. Tube O.D D H L ι

L

light

315

DME-DBUW-06L

DME-DBUW-08L

DME-DBUW-10L

DME-DBUW-12L

DME-DBUW-15L

DME-DBUW-18L

6

8

10

12

15

18

18

20

22

25

28

32

14

17

19

22

27

32

85

85

87

87

100

101

56

56

58

58

70

69

PN 315

DME-DBUW-22L

DME-DBUW-28L

DME-DBUW-35L

DME-DBUW-42L

22

28

35

42

36

41

50

60

36

41

50

60

105

106

114

115

73

73

71

70

S

heavy

PN 630

DME-DBUW-06S

DME-DBUW-08S

DME-DBUW-10S

DME-DBUW-12S

DME-DBUW-14S

6

8

10

12

14

20

22

25

28

30

17

19

22

24

27

89

89

91

91

107

60

60

59

59

72

PN 400

DME-DBUW-16S

DME-DBUW-20S

DME-DBUW-25S

DME-DBUW-30S

16

20

25

30

35

38

45

50

30

36

46

50

107

114

120

126

71

71

72

73

PN 315 DME-DBUW-38S 38 60 60 133 72




Bulkhead Union Elbow DME-DBL

Series Part No. Tube O.D H H1 h L L1 L2 ι ι1 T

L

light

PN 315

DME-DBL-06L

DME-DBL-08L

DME-DBL-10L

DME-DBL-12L

DME-DBL-15L

DME-DBL-18L

6

8

10

12

15

18

14

17

19

22

27

32

17

19

22

24

30

36

12

12

14

17

19

24

27

29

30

32

36

40

42

42

43

44

46

49

14

17

18

20

23

24

12

14

15

17

21

23.5

27

27

28

29

21

32.5

M 12×1.5

M 14×1.5

M 16×1.5

M 18×1.5

M 22×1.5

M 26×1.5

PN 160

DME-DBL-22L

DME-DBL-28L

DME-DBL-35L

DME-DBL-42L

22

28

35

42

36

41

50

60

41

46

55

65

27

36

41

50

44

47

56

63

51

52

58

59

30

34

39

43

27.5

30.5

34.5

40

34.5

35.5

36.5

36

M 30×2

M 36×2

M 45×2

M 52×2

S

heavy

PN 630

DME-DBL-06S

DME-DBL-08S

DME-DBL-10S

DME-DBL-12S

DME-DBL-14S

6

8

10

12

14

17

19

22

24

27

19

22

24

27

30

12

14

17

17

19

31

32

34

38

40

44

44

46

47

50

17

18

20

21

23

16

17

17.5

21.5

22

29

29

29.5

30.5

32

M 14×1.5

M 16×1.5

M 18×1.5

M 20×1.5

M 22×1.5

PN 400

DME-DBL-16S

DME-DBL-20S

DME-DBL-25S

DME-DBL-30S

16

20

25

30

30

36

46

50

32

41

46

50

24

27

36

41

43

48

54

62

50

55

59

64

24

30

34

39

24.5

26.5

30

35.5

31.5

33.5

35

37.5

M 24×1.5

M 30×2

M 36×2

M 42×2

PN 315 DME-DBL-38S 38 60 65 50 72 68 43 41 37 M 52×2




Male Connector (Unified and Metric Paralled) with * O-Ring DME-DOM-U/M

Far Unified

Series Part No. Tube O.D H h k L L1 ι T

U(Unified)

L light

PN 315

DME-DOM-08L-04U DME-DOM-10L-04U

DME-DOM-12L-06U DME-DOM-12L-08U DME-DOM-12L-10U


DME-DOM-18L-10U

8 10

12 12 12

15 15 18

18

17 19

22 22 22

27 27 32

32

17 17

19 24 27

24 27 27

27

14.4 14.4

17.6 22.3 25.5

22.3 25.5 22.3

25.5

25 26

26 28 29

29 30 31

31

9 10

10 11

12.7

11 12.7 11

12.7

10 11

11 13

14.3

14 15.3 14.5

14.8

7/16-20 UNF-2A 7/16-20 UNF-2A

9/16-18 UNF-2A 3/4-16 UNF-2A 7/8-14 UNF-2A

3/4-16 UNF-2A 7/8-14 UNF-2A 3/4-16 UNF-2A

7/8-14 UNF-2A

PN 160



DME-DOM-35L-20U DME-DOM-42L-20U

22 22 22

28 28 35

35 42

36 36 36

41 41 50

50 60

32 32 41

41 41 46

50 55

25.5 31.9 38.2

31.9 38.2 38.2

47.7 47.7

33 33 34

34 34 39

39 42

12.7 15 15

15 15 15

15 15

16.8 16.5 17.5

17.5 17.5 17.5

17.5 19

7/8-14 UNF-2A 1 1/16-12 UN-2A 1 5/16-12 UN-2A

1 1/16-12 UN-2A 1 5/16-12 UN-2A 1 5/16-12 UN-2A

1 5/8-12 UN-2A 1 5/8-12 UN-2A

S heavy

PN 630

DME-DOM-08S-04U DME-DOM-10S-06U


8 10

12 12

19 22

24 24

17 19

22 24

16 17.6

17.6 22.3

30 31

31 34

9 10

10 11

15 14.5

14.5 17.5

7/16-20 UNF-2A 9/16-18 UNF-2A

9/16-18 UNF-2A 3/4-16 UNF-2A

PN 400


DME-DOM-20S-08U DME-DOM-20S-10U DME-DOM-20S-12U

DME-DOM-25S-12U DME-DOM-25S-16U DME-DOM-30S-16U

DME-DOM-30S-20U

16 16

20 20 20

25 25 30

30

30 30

36 36 36

46 46 50

50

24 27

32 32 32

36 41 46

50

22.3 25.5

22.3 25.5 31.9

31.9 38.2 38.2

47.7

34 37

42 42 42

47 47 50

50

11 12.7

11 12.7 15

15 15 15

15

15.5 18.8

20.5 20.8 20.5

23 23

23.5

23.5

3/4-16 UNF-2A 7/8-14 UNF-2A

3/4-16 UNF-2A 7/8-14 UNF-2A

1 1/16-12 UN-2A

1 1/16-12 UN-2A 1 5/16-12 UN-2A 1 5/16-12 UN-2A

1 5/8-12 UN-2A

PN 315 DME-DOM-38S-20U 38 60 55 47.7 57 15 26 1 5/8-12 UN-2A

For Metric Paralled


U(Unified)

L light 315

DME-DOM-06L-M10 DME-DOM-08L-M12 DME-DOM-10L-M14

DME-DOM-12L-M16 DME-DOM-15L-M18 DME-DOM-18L-M22

6 8 10

12 15 18

14 17 19

22 27 32

14 17 19

22 24 27

- - -

- - -

23 25 26

27 29 30

10 11.5 11.5

13 14.5 15.5

8.5 10 11

12 13.5 14

M 10×1 M 12×1.5 M 14×1.5

M 16×1.5 M 18×1.5 M 22×1.5

PN 160 DME-DOM-22L-M26

DME-DOM-28L-M33 DME-DOM-35L-M42

22

28 35

36

41 50

32

41 50

-

38 48

32

34 39

16

19 19.5

16

17.5 17.5

M 26×1.5

M 33×2 M 42×2

S heavy

PN 630

DME-DOM-06S-M12 DME-DOM-08S-M14


6 8

10 12

17 19

22 24

17 19

22 24

- -

- -

27 27

29 29

11.5 11.5

13 14.5

12 12

12.5 13

M 12×1.5 M 14×1.5

M 16×1.5 M 18×1.5

PN 400



16 20

25 30

30 36

46 50

27 32

41 50

- -

38 48

33 37

41 45

15.5 19

19 19.5

15 15

17 18.5

M 22×1.5 M 27×2

M 33×2 M 42×2




Male Connector (BSP Tapered) DME-DMC-R

Male Connector(BSP Paralled) DME-DMC-G

Series Part No. Tube O.D H h k L L1 ι T U(Unified)

LL very light

PN 100

DME-DMC-04LL-01R DME-DMC-06LL-01R DME-DMC-08LL-01R DME-DMC-08LL-02R DME-DMC-10LL-02R DME-DMC-12LL-02R DME-DMC-12LL-03R

4 6 8 8

10 12 12

10 12 14 14 17 19 19

11 11 12 14 14 17 17

- - - - - - -

26 26 28 32 32 32 32

16 14.5 16.5 20.5 20.5 20 20

8 8 8

12 12 12 12

PT 1/8 PT 1/8 PT 1/8 PT 1/4 PT 1/4 PT 1/4 PT 3/8

DME-DMC-06L-01G DME-DMC-06L-01R DME-DMC-06L-02G DME-DMC-06L-03G DME-DMC-06L-04G

6 6 6 6 6

14 14 14 14 14

14 12 19 22 27

14 -

18 22 26

23 30 25 26 27

8.5 15 10

11.5 12

8 8

12 12 14

PF 1/8 PT 1/8 PF 1/4 PF 3/8 PF 1/2

DME-DMC-08L-02G DME-DMC-08L-01G DME-DMC-08L-02R DME-DMC-08L-03G DME-DMC-08L-04G

8 8 8 8 8

17 17 17 17 17

19 14 17 22 27

18 14 -

22 26

25 23 35 26 27

10 8.5 20

11.5 12

12 8

12 12 14

PF 1/4 PF 1/8 PF 1/4 PF 3/8 PF 1/2

DME-DMC-10L-02G DME-DMC-10L-02R DME-DMC-10L-03G DME-DMC-10L-04G

10 10 10 10

19 19 19 19

19 17 22 27

18 -

22 26

26 36 27 28

11 21

12.5 13

12 12 12 14

PF 1/4 PT 1/4 PF 3/8 PF 1/2

DME-DMC-12L-03G DME-DMC-12L-02G DME-DMC-12L-02R DME-DMC-12L-03R DME-DMC-12L-04G DME-DMC-12L-04R DME-DMC-12L-06G

12 12 12 12 12 12 12

22 22 22 22 22 22 22

22 19 19 19 27 24 32

22 18 - -

26 -

32

27 27 37 37 28 39 29

12.5 12 22 22 13 24 14

12 12 12 12 14 14 16

PF 3/8 PF 1/4 PT 1/4 PT 3/8 PF 1/2 PT 1/2 PF 3/4

DME-DMC-15L-04G DME-DMC-15L-03G DME-DMC-15L-03R DME-DMC-15L-04R DME-DMC-15L-06G

15 15 15 15 15

27 27 27 27 27

27 24 24 24 32

26 22 - -

32

29 29 38 40 30

14 13.5 23 25 15

14 12 12 14 16

PF 1/2 PF 3/8 PT 3/8 PT 1/2 PF 3/4

L light

PN 315

DME-DMC-18L-04G DME-DMC-18L-03G DME-DMC-18L-04R DME-DMC-18L-06G

18 18 18 18

32 32 32 32

27 27 27 32

26 22 -

32

31 29.5 41 30

14.5 14

25.5 14.5

14 12 14 16

PF 1/2 PF 3/8 PT 1/2 PF 3/4




Male Connector (BSP Tapered) DME-DMC-R

Male Connector (BSP Paralled) DME-DMC-G


U(Unified)

L

light

PN 160

DME-DMC-22L-06G

DME-DMC-22L-04G

DME-DMC-22L-06R

DME-DMC-28L-08G

DME-DMC-28L-06G

DME-DMC-35L-10G

DME-DMC-35L-08G

DME-DMC-42L-12G

22

22

22

28

28

35

35

42

36

36

36

41

41

50

50

60

32

32

32

41

41

50

46

55

32

26

-

39

32

49

39

55

33

33

46

34

34

39

39

42

16.5

16.5

29.5

17.5

17.5

17.5

17.5

19

16

14

16

18

16

20

18

22

PF 3/4

PF 1/2

PT 3/4

PF 1

PF 3/4

PF 1 1/4

PF 1

PF 1 1/2

S

heavy

PB 630

DME-DMC-06S-02G

DME-DMC-06S-04G

DME-DMC-08S-02G

DME-DMC-08S-03G

DME-DMC-10S-03G

DME-DMC-10S-02G

DME-DMC-10S-04G

DME-DMC-12S-03G

DME-DMC-12S-02G

DME-DMC-12S-04G

DME-DMC-14S-04G

DME-DMC-14S-03G

6

6

8

8

10

10

10

12

12

12

14

14

17

17

19

19

22

22

22

24

24

24

27

27

19

27

19

22

22

19

27

22

22

27

27

24

18

26

18

22

22

18

26

22

18

26

26

22

28

33

30

30

31

31

34

33

33

34

37

36

13

18

15

15.5

15

14.5

17.5

17

16.5

17.5

19

18.5

12

14

12

12

12

12

14

12

12

14

14

12

PF 1/4

PF 1/2

PF 1/4

PF 3/8

PF 3/8

PF 1/4

PF 1/2

PF 3/8

PF 1/4

PF 1/2

PF 1/2

PF 3/8

PB 400

DME-DMC-16S-04G

DME-DMC-16S-03G

DME-DMC-16S-06G

DME-DMC-20S-06G

DME-DMC-20S-04G

DME-DMC-25S-08G

DME-DMC-25S-06G

16

16

16

20

20

25

25

30

30

30

36

36

46

46

27

27

32

32

32

41

41

26

22

32

32

26

39

32

37

36

39

42

42

47

47

18.5

18

20.5

20.5

20.5

23

23

14

12

16

16

14

18

16

PF 1/2

PF 3/8

PF 3/4

PF 3/4

PF 1/2

PF 1

PF 3/4

PB 250

DME-DMC-30S-10G

DME-DMC-30S-08G

DME-DMC-38S-12G

DME-DMC-38S-10G

30

30

38

38

50

50

60

60

50

46

55

55

49

39

55

49

50

50

57

57

23.5

23.5

26

26

20

18

22

20

PF 1 1/4

PF 1

PF 1 1/2

PF 1 1/4




Male Connector (BSP Tapered) DME-DMC-MK

Male Connector (BSP Paralled) DME-DMC-M

Series Part No. Tube O.D H h k L ι L1 T M(Metric)

LL very light PN 100

DME-DMC-04LL-M 6K DME-DMC-04LL-M 8K

DME-DMC-06LL-M 10K DME-DMC-08LL-M 10K

4 4 6 8

10 10 12 14

9 10 11 12

- - - -

26 26 26 28

16 16

14.5 16.5

8 8 8 8

M 6×1Keg M 8×1Keg

M 10×1Keg M 10×1Keg

L light

PN 315

DME-DMC-06L-M10 DME-DMC-08L-M12 DME-DMC-08L-M18 DME-DMC-10L-M14 DME-DMC-10L-M16 DME-DMC-10L-M18 DME-DMC-10L-M22 DME-DMC-12L-M14 DME-DMC-12L-M16 DME-DMC-12L-M18 DME-DMC-12L-M22 DME-DMC-15L-M16 DME-DMC-15L-M18 DME-DMC-15L-M22 DME-DMC-18L-M18 DME-DMC-18L-M22

6 8 8

10 10 10 10 12 12 12 12 15 15 15 18 18

14 17 17 19 19 19 19 22 22 22 22 27 27 27 32 32

14 17 24 19 22 24 27 19 22 24 27 24 24 27 27 27

14 17 23 19 21 23 27 19 21 23 27 21 23 27 23 27

23 25 26 26 27 27 29 26 27 27 29 28 29 30 30 31

8.5 10

11.5 11 12

12.5 14 11

12.5 12.5 14 13

13.5 15 14

14.5

8 12 12 12 12 12 14 12 12 12 14 12 12 14 12 14

M 10×1 M 12×1.5 M 18×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 22×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 22×1.5 M 16×1.5 M 18×1.5 M 22×1.5 M 18×1.5 M 22×1.5

PN 160

DME-DMC-22L-M22 DME-DMC-22L-M26 DME-DMC-28L-M33 DME-DMC-35L-M42 DME-DMC-42L-M48

22 22 28 35 42

36 36 41 50 60

32 32 41 50 55

27 31 39 49 55

33 33 34 39 42

16.5 16.5 17.5 17.5 19

14 16 18 20 22

M 22×1.5 M 26×1.5 M 33×2 M 42×2 M 48×2

S heavy

PB 630

DME-DMC-06S-M12 DME-DMC-08S-M14 DME-DMC-10S-M16 DME-DMC-12S-M18 DME-DMC-12S-M22 DME-DMC-14S-M20

6 8

10 12 12 14

17 19 22 24 24 27

17 19 22 24 27 27

17 19 21 23 27 25

28 30 31 33 34 37

13 15 15 17

17.5 19

12 12 12 12 14 14

M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 22×1.5 M 20×1.5

PB 400

DME-DMC-16S-M18 DME-DMC-16S-M22 DME-DMC-20S-M27 DME-DMC-25S-M33

16 16 20 25

30 30 36 46

27 27 32 41

23 27 32 39

36 37 42 47

18 18.5 20.5 23

12 14 16 18

M 18×1.5 M 22×1.5 M 27×2 M 33×2

PB 250 DME-DMC-30S-M42 DME-DMC-38S-M48

30 38

50 60

50 55

49 55

50 57

23.5 26

20 22

M 42×2 M 48×2




Male Connector (BSP Paralled) with *ED-Ring DME-DMC-GED

Series Part No. Tube O.D H h k L ι L1 T

G(PF)

L light

PN 315

DME-DMC-06L-01GED DME-DMC-06L-02GED DME-DMC-08L-01GED DME-DMC-08L-02GED DME-DMC-08L-03GED DME-DMC-10L-02GED DME-DMC-10L-03GED DME-DMC-10L-04GED DME-DMC-12L-02GED DME-DMC-12L-03GED DME-DMC-12L-04GED DME-DMC-15L-03GED DME-DMC-15L-04GED DME-DMC-18L-04GED DME-DMC-18L-06GED

6 6 8 8 8

10 10 10 12 12 12 15 15 18 18

14 14 17 17 17 19 19 19 22 22 22 27 27 32 32

14 19 14 19 22 19 22 27 19 22 27 24 27 27 32

14 19 14 19 22 19 22 27 19 22 27 22 27 27 32

23 25 24 25 26 26 27 28 27 27 28 29 29 31 31

8.5 10 9.5 10

11.5 11

12.5 13 12

12.5 13

13.5 14

14.5 14.5

8 12 8

12 12 12 12 14 12 12 14 12 14 14 16

1/8 1/4 1/8 1/4 3/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 1/2 3/4

PN 160

DME-DMC-22L-06GED DME-DMC-28L-08GED DME-DMC-35L-10GED DME-DMC-42L-12GED

22 28 35 42

36 41 50 60

32 41 50 55

32 40 50 55

33 34 39 42

16.5 17.5 17.5 19

16 18 20 22

3/4 1

1 1/4 1 1/2

S heavy

PN 630

DME-DMC-06S-02GED DME-DMC-08S-02GED DME-DMC-08S-03GED DME-DMC-10S-02GED DME-DMC-10S-03GED DME-DMC-10S-04GED DME-DMC-12S-02GED DME-DMC-12S-03GED DME-DMC-12S-04GED DME-DMC-14S-04GED

6 8 8

10 10 10 12 12 12 14

17 19 19 22 22 22 24 24 24 27

19 19 22 19 22 27 22 22 27 27

19 19 22 19 22 27 19 22 32 27

28 30 30 31 31 34 33 33 34 37

13 15

15.5 14.5 15

17.5 16.5 17

17.5 19

12 12 12 12 12 14 12 12 14 14

1/4 1/4 3/8 1/4 3/8 1/2 1/4 3/8 1/2 1/2

PN 400

DME-DMC-16S-03GED DME-DMC-16S-04GED DME-DMC-16S-06GED DME-DMC-20S-06GED DME-DMC-25S-04GED DME-DMC-25S-06GED DME-DMC-25S-08GED DME-DMC-30S-10GED

16 16 16 20 25 25 25 30

30 30 30 36 46 46 46 50

27 27 32 32 41 41 41 50

22 27 27 32 27 32 40 50

36 37 39 42 47 47 47 50

18 18.5 20.5 20.5 23 23 23

23.5

12 14 16 16 14 16 18 20

3/8 1/2 3/4 3/4 1/2 3/4 1

1 1/4 PN 315 DME-DMC-38S-12GED 38 60 55 55 57 26 22 1 1/2




Male Connector (BSP Paralled) with *ED-Ring DME-DMC-MED

Series Part No. Tube O.D H h k L ι L1 T

M(Metric)

L

light

PN 315

DME-DMC-06L-M10ED

DME-DMC-08L-M12ED

DME-DMC-10L-M14ED

DME-DMC-12L-M16ED

DME-DMC-12L-M18ED

DME-DMC-12L-M22ED

DME-DMC-15L-M18ED

DME-DMC-15L-M22ED

DME-DMC-18L-M22ED

6

8

10

12

12

12

15

15

18

14

17

19

22

22

22

27

27

32

14

17

19

22

24

27

24

27

27

14

17

19

22

24

27

24

27

27

23

25

26

27

27

29

29

30

31

8.5

10

11

12.5

12.5

14

13.5

15

14.5

8

12

12

12

12

14

12

14

14

M 10×1

M 12×1.5

M 14×1.5

M 16×1.5

M 18×1.5

M 22×1.5

M 18×1.5

M 22×1.5

M 22×1.5

PN 160

DME-DMC-22L-M12ED

DME-DMC-28L-M33ED

DME-DMC-35L-M42ED

DME-DMC-42L-M48ED

22

28

35

42

36

41

50

60

32

41

50

55

32

40

50

55

33

34

39

42

16.5

17.5

17.5

19

16

18

20

22

M 26×1.5

M 33×2

M 42×2

M 48×2

S

heavy

PN 630

DME-DMC-06S-M12ED

DME-DMC-08S-M14ED

DME-DMC-10S-M16ED

DME-DMC-12S-M18ED

DME-DMC-14S-M20ED

6

8

10

12

14

17

19

22

24

27

17

19

22

24

27

17

19

22

24

26

28

30

31

33

37

13

15

15

17

19

12

12

12

12

14

M 12×1.5

M 14×1.5

M 16×1.5

M 18×1.5

M 20×1.5

PN 400

DME-DMC-16S-M22ED

DME-DMC-20S-M27ED

DME-DMC-25S-M33ED

DME-DMC-30S-M42ED

16

20

25

30

30

36

46

50

27

32

41

50

27

32

40

50

37

42

47

50

18.5

20.5

23

23.5

14

16

18

20

M 22×1.5

M 27×2

M 33×2

M 42×2

PN 315 DME-DMC-38S-M48ED 38 60 55 55 57 26 22 M 48×2




Male Connector (NPT Thread) DME-DMC-N

Series Part No. Tube O.D H h L ι L1 T

N(NPT)

LL

very light

PN 100

DME-DMC-04LL-01N

DME-DMC-06LL-01N

DME-DMC-08LL-01N

4

6

8

10

12

14

11

11

12

28

28

30

18.5

16.5

18.5

9.9

9.9

9.9

1/8-27

1/8-27

1/8-27

L

light

PN 315

DME-DMC-06L-01N

DME-DMC-06L-02N

DME-DMC-08L-02N

DME-DMC-10L-02N

DME-DMC-10L-03N

DME-DMC-12L-02N

DME-DMC-12L-03N

DME-DMC-12L-04N

DME-DMC-15L-04N

DME-DMC-15L-04N

6

6

8

10

10

12

12

12

15

18

14

14

17

19

19

22

22

22

27

32

12

17

17

17

19

19

19

22

24

27

32

38

38

39

40

40

40

45

46

48

17

23

23

24

25

25

25

30

31

31.5

9.9

14.2

14.2

14.2

14.2

14.2

14.2

19.1

19.1

19.1

1/8-27

1/4-18

1/4-18

1/4-18

3/8-18

1/4-18

3/8-18

1/2-14

1/2-14

1/2-14

PN 160

DME-DMC-22L-06N

DME-DMC-28L-08N

DME-DMC-35L-10N

DME-DMC-42L-12N

22

28

35

42

36

41

50

60

32

41

46

55

50

56

62

65

33.5

39.5

40.5

42

19.1

23.9

23.9

25.4

3/4-14

1 -11.5

11/4-11.5

11/2-11.5

S

heavy

PN 630

DME-DMC-06S-02N

DME-DMC-08S-02N

DME-DMC-10S-02N

DME-DMC-10S-03N

DME-DMC-12S-02N

DME-DMC-12S-03N

DME-DMC-12S-04N

DME-DMC-14S-04N

6

8

10

10

12

12

12

14

17

19

22

22

24

24

24

27

17

17

19

19

22

22

22

24

43

43

44

44

46

46

51

54

28

28

27.5

27.5

29.5

29.5

34.5

36

14.2

14.2

14.2

14.2

14.2

14.2

19.1

19.1

1/4-18

1/4-18

1/4-18

3/8-18

1/4-18

3/8-18

1/2-14

1/2-14

PN 400

DME-DMC-16S-04N

DME-DMC-20S-06N

DME-DMC-25S-08N

DME-DMC-30S-10N

16

20

25

30

30

36

46

50

27

32

41

46

54

59

69

73

35.5

37.5

45

46.5

19.1

19.1

23.9

23.9

1/2-14

3/4-14

1 -11.5

1 1/4-11.5

PN 315 DME-DMC-38S-12N 38 60 55 80 49 25.4 1 1/2-11.5




Male Elbow (BSP Tapered/Metric Tapered) DME-DLM-R/M

Series Part No. Tube O.D H h L L1 ι T

Metric Taper ι1

T

R(PT)ι 1

LL

very light

PN 100

DLM 04LL-01R

DLM 06LL-01R

DLM 08LL-01R

DLM 10LL-02R

DLM 12LL-02R

DLM 04LL-M 8K

DLM 06LL-M 10K

DLM 08LL-M 10K

-

-

4

6

8

10

12

10

12

14

17

19

9

9

12

14

17

21

21

23

24

25

17

17

20

23

23

11

9.5

11.5

12.5

13

M 8×1 Keg

M 10×1 Keg

M 10×1 Keg

-

-

8

8

8

-

-

1/8

1/8

1/8

1/4

1/4

10

10

10

14

14

L

light

PN 315

DLM 06L-01R

DLM 08L-02R

DLM 10L-02R

DLM 12L-03R

DLM 15L-04R

DLM 18L-04R

DLM 06L-M 10K

DLM 08L-M 12K

DLM 10L-M 14K

DLM 12L-M 16K

DLM 15L-M 18K

DLM 18L-M 22K

6

8

10

12

15

18

14

17

19

22

27

32

12

12

14

17

19

24

27

29

30

32

36

40

20

26

27

28

34

36

12

14

15

17

21

23.5

M 10×1 Keg

M 12×1.5Keg

M 14×1.5Keg

M 16×1.5Keg

M 18×1.5Keg

M 22×1.5Keg

8

12

12

14

14

17

1/8

1/4

1/4

3/8

1/2

1/2

10

14

14

15

19

19

S

heavy

PN 400

DLM 06S-02R

DLM 08S-02R

DLM 10S-03R

DLM 12S-03R

DLM 14S-04R

DLM 16S-04R

DLM 06S-M 12K

DLM 08S-M 14K

DLM 10S-M 16K

DLM 12S-M 18K

DLM 14S-M 20K

DLM 16S-M 22K

6

8

10

12

14

16

17

19

22

24

27

30

12

14

17

17

19

24

31

32

34

38

40

43

26

27

28

28

32

32

16

17

17.5

21.5

22

24.5

M 12×1.5Keg

M 14×1.5Keg

M 16×1.5Keg

M 18×1.5Keg

M 20×1.5Keg

M 22×1.5Keg

12

12

12

12

14

17

1/4

1/4

3/8

3/8

1/2

1/2

14

14

15

15

19

19




Female Connector (BSP Paralled/Metric Paralled) DME-DFC-G/M

for BSP Paralled

Series Part No. Tube O.D d H h L ι ι1 T G(PF)

L light

PN 315

DME-DFC-06L-01G DME-DFC-08L-02G DME-DFC-08L-03G DME-DFC-08L-04G DME-DFC-10L-02G DME-DFC-10L-03G DME-DFC-10L-04G DME-DFC-12L-03G DME-DFC-12L-04G DME-DFC-15L-04G DME-DFC-18L-04G

6 8 8 8

10 10 10 12 12 15 18

4 6 6 6 8 8 8

10 10 12 15

14 17 17 17 19 19 19 22 22 27 32

14 19 24 27 19 24 27 24 27 27 27

34 39 40 44 40 41 45 41 45 46 47

19 24 25 29 25 26 30 26 30 31

30.5

12 17 17 20 17 17 20 17 20 20 20

1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 1/2 1/2

PB 160

DME-DFC-22L-06G DME-DFC-28L-08G DME-DFC-35L-10G DME-DFC-42L-12G

22 28 35 42

19 24 30 36

36 41 50 60

36 41 55 60

52 55 63 65

35.5 38 41

42.5

22 24.5 26.5 28.5

3/4 1

1 1/4 1 1/2

S heavy

PB 630

DME-DFC-06S-02G DME-DFC-08S-02G DME-DFC-10S-03G DME-DFC-12S-03G DME-DFC-14S-04G

6 8

10 12 14

4 5 7 8

10

17 19 22 24 27

19 19 24 24 30

41 41 43 43 50

26 26

26.5 26.5 32

17 17 17 17 20

1/4 1/4 3/8 3/8 1/2

PB 400

DME-DFC-16S-04G DME-DFC-20S-06G DME-DFC-25S-08G DME-DFC-30S-10G

16 20 25 30

12 16 20 25

30 36 46 50

30 36 41 55

50 56 62 69

31.5 34.5 37.5 42

20 22

24.5 26.5

1/2 3/4 1

1 1/4 PN 315 DME-DFC-38S-12G 38 32 60 60 74 43.5 28.5 1 1/2

for Metric Paralled

Series Part No. Tube O.D d H h L ι ι1 T G(PF)

L light

PN 315

DME-DFC-06L-M10 DME-DFC-08L-M12 DME-DFC-10L-M14 DME-DFC-12L-M16 DME-DFC-15L-M18 DME-DFC-18L-M22

6 8

10 12 15 18

4 6 8

10 12 15

14 17 19 22 27 32

14 17 19 22 24 30

34 39 40 41 43 46

19.5 24 25 26 28

29.5

12.5 17 17 17 17 19

M 10×1 M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 22×1.5

PB 160

DME-DFC-22L-M26 DME-DFC-28L-M33 DME-DFC-35L-M42 DME-DFC-42L-M48

22 28 35 42

19 24 30 36

36 41 50 60

32 41 55 60

51 54 62 65

34.5 37.5 40.5 42

21 24 26 28

M 26×1.5 M 33×2 M 42×2 M 48×2

S heavy

PB 630

DME-DFC-06S-M12 DME-DFC-08S-M14 DME-DFC-10S-M16 DME-DFC-12S-M18 DME-DFC-14S-M20

6 8

10 12 14

4 5 7 8

10

17 19 22 24 27

17 19 22 24 27

41 41 43 44 49

26 26

26.5 27.5 31

17 17 17 17 19

M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 20×1.5

PB 400

DME-DFC-16S-M22 DME-DFC-20S-M27 DME-DFC-25S-M33 DME-DFC-30S-M42

16 20 25 30

12 16 20 25

30 36 46 50

30 36 41 55

49 56 61 68

30.5 34.5 37

41.5

19 22 24 26

M 22×1.5 M 27×2 M 33×2 M 42×2

PN 315 DME-DFC-38S-M48 38 32 60 60 74 43 28 M 48×2




Adjustable Elbow with Standpipe DME-DLA

Series Part No. Tube O.D D H h L L1 ι T

L

light

PN 315

DME-DLA-06L

DME-DLA-08L

DME-DLA-10L

DME-DLA-12L

DME-DLA-15L

DME-DLA-18L

6

8

10

12

15

18

6

8

10

12

15

18

14

17

19

22

27

32

12

12

14

17

19

24

27

29

30

32

36

40

26

27.5

29

29.5

32.5

35.5

12

14

15

17

21

23.5

M 12×1.5

M 14×1.5

M 16×1.5

M 18×1.5

M 22×1.5

M 26×1.5

PN 160

DME-DLA-22L

DME-DLA-28L

DME-DLA-35L

DME-DLA-42L

22

28

35

42

22

28

35

42

36

41

50

60

27

36

41

50

44

47

56

63

38.5

41.5

51

56

27.5

30.5

34.5

40

M 30×2

M 36×2

M 45×2

M 52×2

S

heavy

PN 630

DME-DLA-06S

DME-DLA-08S

DME-DLA-10S

DME-DLA-12S

DME-DLA-14S

6

8

10

12

14

6

8

10

12

14

17

19

22

24

27

12

14

17

17

19

31

32

34

38

40

27

27.5

30

31

35

16

17

17.5

21.5

22

M 14×1.5

M 16×1.5

M 18×1.5

M 20×1.5

M 22×1.5

PN 400

DME-DLA-16S

DME-DLA-20S

DME-DLA-25S

DME-DLA-30S

16

20

25

30

16

20

25

30

30

36

46

50

24

27

36

41

43

48

54

62

36.5

44.5

50

55

24.5

26.5

30

35.5

M 24×1.5

M 30×2

M 36×2

M 42×2

PN 315 DME-DLA-38S-12 38 60 55 55 57 26 22 1 1/2




Adjustable Branch Tee with Standpipe DME-DBTA

Series Part No. Tube O.D D H h L L1 ι T

L

light

PN 315

DME-DBTA-06L

DME-DBTA-08L

DME-DBTA-10L

DME-DBTA-12L

DME-DBTA-15L

DME-DBTA-18L

6

8

10

12

15

18

6

8

10

12

15

18

14

17

19

22

27

32

12

12

14

17

19

24

27

29

30

32

36

40

26

27.5

29

29.5

32.5

35.5

12

14

15

17

21

23.5

M 12×1.5

M 14×1.5

M 16×1.5

M 18×1.5

M 22×1.5

M 26×1.5

PN 160

DME-DBTA-22L

DME-DBTA-28L

DME-DBTA-35L

DME-DBTA-42L

22

28

35

42

22

28

35

42

36

41

50

60

27

36

41

50

44

47

56

63

38.5

41.5

51

56

27.5

30.5

34.5

40

M 30×2

M 36×2

M 45×2

M 52×2

S

heavy

PN 630

DME-DBTA-06S

DME-DBTA-08S

DME-DBTA-10S

DME-DBTA-12S

DME-DBTA-14S

6

8

10

12

14

6

8

10

12

14

17

19

22

24

27

12

14

17

17

19

31

32

34

38

40

27

27.5

30

31

35

16

17

17.5

21.5

22

M 14×1.5

M 16×1.5

M 18×1.5

M 20×1.5

M 22×1.5

PN 400

DME-DBTA-16S

DME-DBTA-20S

DME-DBTA-25S

DME-DBTA-30S

16

20

25

30

16

20

25

30

30

36

46

50

24

27

36

41

43

48

54

62

36.5

44.5

50

55

24.5

26.5

30

35.5

M 24×1.5

M 30×2

M 36×2

M 42×2

PN 315 DME-DBTA-38S 38 38 60 50 72 63 41 1 1/2




Adjustable Run Tee with Standpipe DME-DRTA

Series Part No. Tube O.D D h H L ι L1 T

L

light

PN 315

DME-DRTA-06L

DME-DRTA-08L

DME-DRTA-10L

DME-DRTA-12L

DME-DRTA-15L

DME-DRTA-18L

6

8

10

12

15

18

6

8

10

12

15

18

12

12

14

17

19

24

14

17

19

22

27

32

53

56

59

62

69

75

12

14

15

17

21

23.5

26

27.5

29

29.5

32.5

35.5

M 12×1.5

M 14×1.5

M 16×1.5

M 18×1.5

M 22×1.5

M 26×1.5

PN 160

DME-DRTA-22L

DME-DRTA-28L

DME-DRTA-35L

DME-DRTA-42L

22

28

35

42

22

28

35

42

27

36

41

50

36

41

50

60

83

91

111

123

27.5

30.5

34.5

40

38.5

41.5

51

56

M 30×2

M 36×2

M 45×2

M 52×2

S

heavy

PN 630

DME-DRTA-06S

DME-DRTA-08S

DME-DRTA-10S

DME-DRTA-12S

DME-DRTA-14S

6

8

10

12

14

6

8

10

12

14

12

14

17

17

19

17

19

22

24

27

58

61

66

71

75

16

17

17.5

21.5

22

27

27.5

30

31

35

M 14×1.5

M 16×1.5

M 18×1.5

M 20×1.5

M 22×1.5

PN 400

DME-DRTA-16S

DME-DRTA-20S

DME-DRTA-25S

DME-DRTA-30S

16

20

25

30

16

20

25

30

24

27

36

41

30

36

46

50

79

93

105

119

24.5

26.5

30

35.5

36.5

44.5

50

55

M 24×1.5

M 30×2

M 36×2

M 42×2

PN 315 DME-DRTA-38S 38 38 50 60 138 41 63 M 52×2




Swivel Adjustable Elbow with Cone DME-DEW

Series Part No. Tube O.D H h L ι L1 T

L

light

PN 315

DME-DEW-06L

DME-DEW-08L

DME-DEW-10L

DME-DEW-12L

DME-DEW-15L

DME-DEW-18L

6

8

10

12

15

18

14

17

19

22

27

32

12

12

14

17

19

24

27

29

30

32

36

40

12

14

15

17

21

23.5

26

27.5

29

29.5

32.5

35.5

M 12×1.5

M 14×1.5

M 16×1.5

M 18×1.5

M 22×1.5

M 26×1.5

PN 160

DME-DEW-22L

DME-DEW-28L

DME-DEW-35L

DME-DEW-42L

22

28

35

42

36

41

50

60

27

36

41

50

44

47

56

63

27.5

30.5

34.5

40

38.5

41.5

51

56

M 30×2

M 36×2

M 45×2

M 52×2

S

heavy

PN 630

DME-DEW-06S

DME-DEW-08S

DME-DEW-10S

DME-DEW-12S

DME-DEW-14S

6

8

10

12

14

17

19

22

24

27

12

14

17

17

19

31

32

34

38

40

16

17

17.5

21.5

22

27

27.5

30

31

35

M 14×1.5

M 16×1.5

M 18×1.5

M 20×1.5

M 22×1.5

PN 400

DME-DEW-16S

DME-DEW-20S

DME-DEW-25S

DME-DEW-30S

16

20

25

30

30

36

36

50

24

27

36

41

43

48

54

62

24.5

26.5

30

35.5

36.5

44.5

50

55

M 24×1.5

M 30×2

M 36×2

M 42×2

PN 315 DME-DEW-38S 38 38 50 60 138 41 M 52×2




Swivel Adjustable Branch Tee with Cone DME-DET

Series Part No. Tube O.D

D H h L L1 ι T

L

light

PN 315

DME-DET-06L

DME-DET-08L

DME-DET-10L

DME-DET-12L

DME-DET-15L

DME-DET-18L

6

8

10

12

15

18

14

17

19

22

27

32

12

12

14

17

19

24

27

29

30

32

36

40

26

27.5

29

29.5

32.5

35.5

12

14

15

17

21

23.5

M 12×1.5

M 14×1.5

M 16×1.5

M 18×1.5

M 22×1.5

M 26×1.5

PN 160

DME-DET-22L

DME-DET-28L

DME-DET-35L

DME-DET-42L

22

28

35

42

36

41

50

60

27

36

41

50

44

47

56

63

38.5

41.5

51

56

27.5

30.5

34.5

40

M 30×2

M 36×2

M 45×2

M 52×2

S

heavy

PN 630

DME-DET-06S

DME-DET-08S

DME-DET-10S

DME-DET-12S

DME-DET-14S

6

8

10

12

14

17

19

22

24

27

12

14

17

17

19

31

32

34

38

40

27

27.5

30

31

35

16

17

17.5

21.5

22

M 14×1.5

M 16×1.5

M 18×1.5

M 20×1.5

M 22×1.5

PN 400

DME-DET-16S

DME-DET-20S

DME-DET-25S

DME-DET-30S

16

20

25

30

30

36

36

50

24

27

36

41

43

48

54

62

36.5

44.5

50

55

24.5

26.5

30

35.5

M 24×1.5

M 30×2

M 36×2

M 42×2

PN 315 DME-DET-38S 38 38 50 60 138 41 M 52×2




Swivel Adjustable Run Tee with Cone DME-DEL


D H h L L1 ι ι1 T

L

light

PN 315

DME-DEL-06L

DME-DEL-08L

DME-DEL-10L

DME-DEL-12L

DME-DEL-15L

DME-DEL-18L

6

8

10

12

15

18

14

17

19

22

27

32

12

12

14

17

19

24

27

29

30

32

36

40

53

56

59

61

69

75

12

14

15

17

21

23.5

26

27.5

29

29.5

32.5

35.5

M 12×1.5

M 14×1.5

M 16×1.5

M 18×1.5

M 22×1.5

M 26×1.5

PN 160

DME-DEL-22L

DME-DEL-28L

DME-DEL-35L

DME-DEL-42L

22

28

35

42

36

41

50

60

27

36

41

50

44

47

56

63

82

89

107

119

27.5

30.5

34.5

40

38.5

41.5

51

56

M 30×2

M 36×2

M 45×2

M 52×2

S

heavy

PN 630

DME-DEL-06S

DME-DEL-08S

DME-DEL-10S

DME-DEL-12S

DME-DEL-14S

6

8

10

12

14

17

19

22

24

27

12

14

17

17

19

31

32

34

38

40

58

59

64

69

75

16

17

17.5

21.5

22

27

27.5

30

31

35

M 14×1.5

M 16×1.5

M 18×1.5

M 20×1.5

M 22×1.5

PN 400

DME-DEL-16S

DME-DEL-20S

DME-DEL-25S

DME-DEL-30S

16

20

25

30

30

36

36

50

24

27

36

41

43

48

54

62

79

93

104

117

24.5

26.5

30

35.5

36.5

44.5

50

55

M 24×1.5

M 30×2

M 36×2

M 42×2

PN 315 DME-DEL-38S 38 60 50 72 135 41 63 M 52×2




Standpipe Reducer DME-DKOR

Series L(Light)

Tube O.D. PN Part No.

D1 D2 H1 H2 L ι T

PN315 DKOR 08L-06L 8 6 17 14 38 23.5 M14×1.5

PN315 DKOR 10L-06L DKOR 10L-08L

10

6 8

19

14 17

38

23.5

M16×1.5

PN315 DKOR 12L-06L DKOR 12L-08L DKOR 12L-10L

12

6 8

10 22

14 17 19

38 38 39

23.5 23.5 24.5

M 18×1.5

PN 315

DKOR 15L-06L DKOR 15L-08L DKOR 15L-10L DKOR 15L-12L

15

6 8

10 12

27

14 17 19 22

38 38 39 39

23.5 23.5 24.5 24.5

M 22×1.5

PN 315

DKOR 18L-06L DKOR 18L-08L DKOR 18L-10L DKOR 18L-12L DKOR 18L-15L

18

6 8

10 12 15

32

14 17 19 22 27

39 39 40 40 42

24.5 24.5 25.5 25.5 26.5

M 26×1.5

PN 160

DKOR 22L-06L DKOR 22L-08L DKOR 22L-10L DKOR 22L-12L DKOR 22L-15L DKOR 22L-18L

22

6 8

10 12 15 18

36

14 17 19 22 27 32

40 40 41 41 43 43

25.5 25.5 26.5 26.5 27.5 27

M 30×2

PN 160

DKOR 28L-06L DKOR 28L-08L DKOR 28L-10L DKOR 28L-12L DKOR 28L-15L DKOR 28L-18L DKOR 28L-22L

28

6 8

10 12 15 18 22

41

14 17 19 22 27 32 36

41 41 42 42 44 44 46

26.5 26.5 27.5 27.5 28.5 28 30

M 36×2

PN 160

DKOR 35L-06L DKOR 35L-08L DKOR 35L-10L DKOR 35L-12L DKOR 35L-15L DKOR 35L-18L DKOR 35L-22L DKOR 35L-28L

35

6 8

10 12 15 18 22 28

50

14 17 19 22 27 32 36 41

46 46 47 47 49 49 51 52

31.5 31.5 32.5 32.5 33.5 33 35 35

M 45×2

PN 160

DKOR 42L-10L DKOR 42L-12L DKOR 42L-15L DKOR 42L-18L DKOR 42L-22L DKOR 42L-28L DKOR 42L-35L

42

10 12 15 18 22 28 35

60

19 22 27 32 36 41 50

48 48 50 50 52 53 57

33.5 33.5 34.5 34 36 36 35

M 52×2

Series S(heavy) Tube O.D. PN Part No. D1 D2

H1 H2 L ι T

PN630 DKOR 08S-06S 8 6 19 17 40 25 M16×1.5

PN630 DKOR 10S-06S DKOR 10S-08S

10 6 8

22 17 19

41 41

26 26

M18×1.5

PN630 DKOR 12S-06S DKOR 12S-08S DKOR 12S-10S

12 6 8

10 24

17 19 22

42 42 43

27 27

26.5 M20×1.5

PN630

DKOR 14S-06S DKOR 14S-08S DKOR 14S-10S DKOR 14S-12S

14

6 8

10 12

27

17 19 22 24

44 44 45 45

29 29

28.5 28.5

M22×1.5

PN400

DKOR 16S-06S DKOR 16S-08S DKOR 16S-10S DKOR 16S-12S DKOR 16S-14S

16

6 8

10 12 14

30

17 19 22 24 27

44 44 45 45 48

29 29

28.5 28.5 30

M24×1.5

PN400

DKOR 20S-06S DKOR 20S-08S DKOR 20S-10S DKOR 20S-12S DKOR 20S-14S DKOR 20S-16S

20

6 8

10 12 14 16

36

17 19 22 24 27 30

49 49 50 50 53 53

34 34

33.5 33.5 35

34.5

M30×2

PN400

DKOR 25S-06S DKOR 25S-08S DKOR 25S-10S DKOR 25S-12S DKOR 25S-14S DKOR 25S-16S DKOR 25S-20S

25

6 8

10 12 14 16 20

46

17 19 22 24 27 30 36

52 52 53 53 55 55 59

37 37

36.5 36.5 37

36.5 37.5

M36×2

PN400

DKOR 30S-06S DKOR 30S-08S DKOR 30S-10S DKOR 30S-12S DKOR 30S-14S DKOR 30S-16S DKOR 30S-20S DKOR 30S-25S

30

6 8

10 12 14 16 20 25

50

17 19 22 24 27 30 36 46

54 54 55 55 58 58 61 64

39 39

38.5 38.5 40

39.5 39.5 40

M42×2

PN315

DKOR 38S-06S DKOR 38S-08S DKOR 38S-10S DKOR 38S-12S DKOR 38S-14S DKOR 38S-16S DKOR 38S-20S DKOR 38S-25S DKOR 38S-30S

38

6 8

10 12 14 16 20 25 30

60

17 19 22 24 27 30 36 46 50

58 58 59 59 62 62 65 68 71

43 43

42.5 42.5 44

43.5 43.5 44

44.5

M52×2




Reducer DME- DR

Series Part No.

Tube O.D. D1

Tube O.D. D2

H h L ι

DME-DR08L-06L 8 6 17 14 38 23.5 DME-DR10L-06L DME-DR10L-08L

10 6 8

14 17

12 14

42 43

27.5 27.5

DME-DR12L-06L DME-DR12L-08L DME-DR12L-10L

12 6 8

10

14 17 19

14 14 17

42 43 44

27.5 27.5 28.5

DME-DR15L-06L DME-DR15L-08L DME-DR15L-10L DME-DR15L-12L

15

6 8

10 12

14 17 19 22

19 19 19 19

44 44 45 45

29 29 30 30

L Series PN315

DME-DR18L-06L DME-DR18L-08L DME-DR18L-10L DME-DR18L-12L DME-DR18L-15L

18

6 8

10 12 15

14 17 19 22 27

19 19 19 19 22

46 46 47 47 49

31 31 32 32 33

DME-DR22L-06L DME-DR22L-08L DME-DR22L-10L DME-DR22L-12L DME-DR22L-15L DME-DR22L-18L

22

6 8

10 12 15 18

14 17 19 22 27 32

24 24 24 24 24 27

49 49 49 49 50 51

33 33 34 34 35

34.5 DME-DR28L-06L DME-DR28L-08L DME-DR28L-10L DME-DR28L-12L DME-DR28L-15L DME-DR28L-18L DME-DR28L-22L

28

6 8

10 12 15 18 22

14 17 19 22 27 32 36

30 30 30 30 30 30 32

48 48 49 49 50 51 53

33 33 34 34 35 36

36.5 DME-DR35L-06L DME-DR35L-08L DME-DR35L-10L DME-DR35L-12L DME-DR35L-15L DME-DR35L-18L DME-DR35L-22L DME-DR35L-28L

35

6 8

10 12 15 18 22

14 17 19 22 27 32 36 41

36 36 36 36 36 36 36 36

53 53 55 55 56 56 58 59

38.5 38.5 39.5 39.5 40.5 40 42 42

PN 160

DME-DR42L-06L DME-DR42L-08L DME-DR42L-10L DME-DR42L-12L DME-DR42L-15L DME-DR42L-18L DME-DR42L-22L DME-DR42L-28L DME-DR42L-35L

42

6 8

10 12 15 18 22

35

14 17 19 22 27 32 36 41 50

46 46 46 46 46 46 46 46 46

56 56 58 58 60 60 62 64 67

41 41 42 42 43

42.5 44.5 44.5 43.5

Series Part No. Tube O.D.

D1

Tube O.D.

D2 H h L ι

DME-DR08S-06S 8 6 17 14 43 28 DME-DR10S-06S DME-DR10S-08S

10 6 8

17 19

14 17

45 45

30.5 30.5

DME-DR12S-06S DME-DR12S-08S DME-DR12S-10S

12 6 8

10

17 19 22

14 17 19

47 47 48

32.5 32.5 32

DME-DR14S-06S DME-DR14S-08S DME-DR14S-10S DME-DR14S-12S

14

6 8

10 12

17 19 22 24

17 17 19 22

51 51 52 52

36.5 36.5 36 36

S Series

DME-DR16S-06S DME-DR16S-08S DME-DR16S-10S DME-DR16S-12S DME-DR16S-14S

16

6 8

10 12 14

17 19 22 24 27

17 17 19 22 22

53 53 54 55 57

38.5 38.5 38

38.5 39.5

DME-DR20S-06S DME-DR20S-08S DME-DR20S-10S DME-DR20S-12S DME-DR20S-14S DME-DR20S-16S

20

6 8

10 12 14 16

17 19 22 24 27 30

22 22 22 22 22 24

58 58 59 59 62 62

43 43

42.5 42.5 44

43.5 DME-DR25S-06S DME-DR25S-08S DME-DR25S-10S DME-DR25S-12S DME-DR25S-14S DME-DR25S-16S DME-DR25S-20S

25

6 8

10 12 14 16 20

17 19 22 24 27 30 36

27 27 27 27 27 27 30

62 62 63 63 66 66 70

47.5 47.5 47 47

48.5 48 48

PN 400

DME-DR30S-06S DME-DR30S-08S DME-DR30S-10S DME-DR30S-12S DME-DR30S-14S DME-DR30S-16S DME-DR30S-20S DME-DR30S-25S

30

6 8

10 12 14 16 20 25

17 19 22 24 27 30 36 46

32 32 32 32 32 32 32 36

67 67 68 68 71 71 74 77

52 52

51.5 51.5 53

52.5 52.5 53

PN 315

DME-DR38S-06S DME-DR38S-08S DME-DR38S-10S DME-DR38S-12S DME-DR38S-14S DME-DR38S-16S DME-DR38S-20S DME-DR38S-25S DME-DR38S-30S

38

6 8

10 12 14 16 20 25 30

17 19 22 24 27 30 36 46 50

41 41 41 41 41 41 41 41 46

72 72 73 73 76 76 79 82 89

57 57

56.5 56.5 58

57.5 57.5 58

58.5




Swivel Reducing Adapter with Cone DME-DRED

Series L(Light)

Tube O.D. PN Part No.

D1 D2 H1 H2 h L ι

PN315 DRED 08L-06L 8 6 17 14 14 39 24.5

PN315 DRED 10L-06L DRED 10L-08L

10

6 8

19

14 17

17

39.5 39.5

24.5 24.5

PN315 DRED 12L-06L DRED 12L-08L DRED 12L-10L

12

6 8

10 22

14 17 19

17 40 40 41

25 25 26

PN 315

DRED 15L-06L DRED 15L-08L DRED 15L-10L DRED 15L-12L

15

6 8

10 12

27

14 17 19 22

22

42 42 43 43

27.5 27.5 28.5 28.5

PN 315

DRED 18L-06L DRED 18L-08L DRED 18L-10L DRED 18L-12L DRED 18L-15L

18

6 8

10 12 15

32

14 17 19 22 27

25

43 43

44.5 44.5 45.5

28 28

29.5 29.5 30.5

PN 160

DRED 22L-06L DRED 22L-08L DRED 22L-10L DRED 22L-12L DRED 22L-15L DRED 22L-18L

22

6 8

10 12 15 18

36

14 17 19 22 27 32

28.5

47 47 48 48 49 50

32 32 33 33 34

33.5

PN 160

DRED 28L-06L DRED 28L-08L DRED 28L-10L DRED 28L-12L DRED 28L-15L DRED 28L-18L DRED 28L-22L

28

6 8

10 12 15 18 22

41

14 17 19 22 27 32 36

36

49 49 50 50 51 52 54

34 34 35 35 36

35.5 37.5

PN 160

DRED 35L-06L DRED 35L-08L DRED 35L-10L DRED 35L-12L DRED 35L-15L DRED 35L-18L DRED 35L-22L DRED 35L-28L

35

6 8

10 12 15 18 22 28

50

14 17 19 22 27 32 36 41

46

55 55 56 56 57 58 60 60

40 40 41 41 42

41.5 43.5 43.5

PN 160

DRED 42L-06L DRED 42L-08L DRED 42L-10L DRED 42L-12L DRED 42L-15L DRED 42L-18L DRED 42L-22L DRED 42L-28L DRED 42L-35L

42

6 8

10 12 15 18 22 28 35

60

14 17 19 22 27 32 36 41 50

50

55 55 56 56 58 58 60 61 65

40.5 40.5 41.5 41.5 42.5 42 44 44 43

Series S(heavy) Tube O.D. PN Part No. D1 D2

H1 H2 h L ι

PN630 DRED 08S-06S 8 6 19 17 17 44 28

PN630 DRED 10S-06S DRED 10S-08S

10 6 8

22 17 19

17 44 44

29.5 29.5

PN630 DRED 12S-06S DRED 12S-08S DRED 12S-10S

12 6 8

10 24

17 19 22

19 45 45 46

30 30

29.5

PN630

DRED 14S-06S DRED 14S-08S DRED 14S-10S DRED 14S-12S

14

6 8

10 12

27

17 19 22 24

22

47.5 47.5 48.5 48.5

33 33

32.5 32.5

PN400

DRED 16S-06S DRED 16S-08S DRED 16S-10S DRED 16S-12S DRED 16S-14S

16

6 8

10 12 14

30

17 19 22 24 27

24

50.0 50 51 51 54

35 35

34.5 34.5 36

PN400

DRED 20S-06S DRED 20S-08S DRED 20S-10S DRED 20S-12S DRED 20S-14S DRED 20S-16S

20

6 8

10 12 14 16

36

17 19 22 24 27 30

28.5

54 54 55 55 58 58

39 39

38.5 38.5 40

39.5

PN400

DRED 25S-06S DRED 25S-08S DRED 25S-10S DRED 25S-12S DRED 25S-14S DRED 25S-16S DRED 25S-20S

25

6 8

10 12 14 16 20

46

17 19 22 24 27 30 36

36

58 58 59 59 62 62 66

43.5 43.5 43 43

44.5 44 44

PN400

DRED 30S-06S DRED 30S-08S DRED 30S-10S DRED 30S-12S DRED 30S-14S DRED 30S-16S DRED 30S-20S DRED 30S-25S

30

6 8

10 12 14 16 20 25

50

17 19 22 24 27 30 36 46

41

66 66 67 67 70 70 73 76

51 51

50.5 50.5 52

51.5 51.5 52

PN315

DRED 38S-06S DRED 38S-08S DRED 38S-10S DRED 38S-12S DRED 38S-14S DRED 38S-16S DRED 38S-20S DRED 38S-25S DRED 38S-30S

38

6 8

10 12 14 16 20 25 30

60

17 19 22 24 27 30 36 46 50

50

70.5 70.5 71.5 71.5 74.5 74.5 78.5 81.5 85.5

56 56

55.5 55.5 57

56.5 56.5 57

58.5




Adapter (BSP Paralled/Metric Paralled) with *ED-Ring DME-DA-GED/MED

for BSP Paralled Series Part No. Tube O.D

D H h K L ι T G(PF) T1

L light

PN 315

DME-DA 06L-01GED DME-DA 08L-02GED DME-DA 10L-02GED DME-DA 12L-03GED DME-DA 15L-04GED DME-DA 18L-04GED

6 8

10 12 15 18

14 17 19 22 27 32

14 19 19 22 27 27

14 19 19 22 27 27

24.5 29.5 27.5 34 32

31.5

8 12 12 12 14 14

1/8 1/4 1/4 3/8 1/2 1/2

M12×1.5 M14×1.5 M16×1.5 M18×1.5 M22×1.5 M26×1.5

PN 160

DME-DA 22L-06GED DME-DA 28L-08GED DME-DA 35L-10GED DME-DA 42L-12GED

22 28 35 42

36 41 50 60

32 41 50 55

32 40 50 55

32.5 35

42.5 46.5

16 18 20 22

3/4 1

1 1/4 1 1/2

M30×2 M36×2 M45×2 M52×2

S heavy

PN 630

DME-DA 06S-02GED DME-DA 08S-02GED DME-DA 10S-03GED DME-DA 12S-03GED

DME-DA 12S-04GED DME-DA 14S-04GED

6 8

10 12 12 14

17 19 22 24 24 27

19 19 22 22 27 27

19 19 22 22 27 27

27 29.5 32 34

34.5 36.5

12 12 12 12 14 14

1/4 1/4 3/8 3/8 1/2 1/2

M14×1.5 M16×1.5 M18×1.5 M20×1.5 M20×1.5 M22×1.5

PN 400

DME-DA 16S-04GED DME-DA 16S-06GED DME-DA 20S-06GED DME-DA 25S-08GED DME-DA 30S-10GED

16 16 20 25 30

30 30 36 46 50

27 32 32 41 50

27 32 32 40 50

37 39 43 48 51

14 16 16 18 20

1/2 3/4 3/4 1

1 1/4

M24×1.5 M24×1.5 M30×2 M36×2 M42×2

DME-DA 38S-12GED 38 60 55 55 60 22 1 1/2 M52×2 for Metric Paralled

Series Part No. Tube O.D D H h K L ι T

M(Metric) T1

L light

PN 315

DME-DA 06L-M10ED DME-DA 08L-M12ED DME-DA 10L-M14ED DME-DA 12L-M16ED DME-DA 15L-M18ED DME-DA 18L-M22ED

6 8

10 12 15 18

14 17 19 22 27 32

14 19 19 22 24 27

14 19 19 22 24 27

24.5 26.5 27.5 30.5 31.5 31.5

8 12 12 12 14 14

M10×1 M12×1.5 M14×1.5 M16×1.5 M18×1.5 M22×1.5

M12×1.5 M14×1.5 M16×1.5 M18×1.5 M22×1.5 M26×1.5

PN 160

DME-DA 22L-M26ED DME-DA 28L-M33ED DME-DA 35L-M42ED DME-DA 42L-M48ED

22 28 35 42

36 41 50 60

32 41 50 55

32 40 50 55

32.5 35

42.5 46.5

16 18 20 22

M26×1.5 M33×2 M42×2 M48×2

M30×2 M36×2 M45×2 M52×2

S heavy

PN 630

DME-DA 06S-M12ED DME-DA 08S-M14ED DME-DA 10S-M16ED DME-DA 12S-M18ED DME-DA 14S-M20ED

6 8

10 12 14

17 19 22 24 27

17 19 22 27 27

17 19 22 27 27

27 29.5 32 34

36.5

12 12 12 12 14

M12×1.5 M14×1.5 M16×1.5 M18×1.5 M20×1.5

M14×1.5 M16×1.5 M18×1.5 M20×1.5 M22×1.5

PN 400

DME-DA 16S-M22ED DME-DA 20S-M27ED DME-DA 25S-M33ED DME-DA 30S-M42ED

16 20 25 30

30 36 46 50

27 32 41 50

27 32 40 50

37 43 48 51

14 16 18 20

M22×1.5 M27×2 M33×2 M42×2

M24×1.5 M30×2 M36×2 M42×2

PN 315 DME-DA 38S-M48ED 38 60 55 55 60 22 M48×2 M52×2




Swivel ADEGEpter (BSP Paralled/Metric Paralled) with Cone and *ED-Ring DME-DEGE-G/M

for BSP Paralled


G(PF) T1

L light

PN 315

DME-DEGE 06L-01G DME-DEGE 08L-02G DME-DEGE 10L-02G DME-DEGE 12L-03G DME-DEGE 15L-04G DME-DEGE 18L-04G

6 8

10 12 15 18

14 17 19 22 27 32

14 19 19 22 27 27

14 19 19 22 27 27

24.5 29.5 27.5 34 32

31.5

8 12 12 12 14 14

1/8 1/4 1/4 3/8 1/2 1/2

M12×1.5 M14×1.5 M16×1.5 M18×1.5 M22×1.5 M26×1.5

PN 160

DME-DEGE 22L-06G DME-DEGE 28L-08G DME-DEGE 35L-10G DME-DEGE 42L-12G

22 28 35 42

36 41 50 60

32 41 50 55

32 40 50 55

32.5 35

42.5 46.5

16 18 20 22

3/4 1

1 1/4 1 1/2

M30×2 M36×2 M45×2 M52×2

S heavy

PN 630

DME-DEGE 06S-02G DME-DEGE 08S-02G DME-DEGE 10S-03G DME-DEGE 12S-03G DME-DEGE 14S-04G

6 8

10 12 14

17 19 22 24 27

19 19 22 22 27

19 19 22 22 27

27 29.5 32 34

36.5

12 12 12 12 14

1/4 1/4 3/8 3/8 1/2

M14×1.5 M16×1.5 M18×1.5 M20×1.5 M22×1.5

PN 400

DME-DEGE 16S-04G DME-DEGE 20S-06G DME-DEGE 25S-08G DME-DEGE 30S-10G

16 20 25 30

30 36 46 50

27 32 41 50

27 32 40 50

37 43 48 51

14 16 18 20

1/2 3/4 1

1 1/4

M24×1.5 M30×2 M36×2 M42×2

PN 315 DME-DEGE 38S-12G 38 60 55 55 60 22 1 1/2 M52×2 for Metric Paralled


M(Metric) T1

L light

PN 315

DME-DEGE 06L-M10 DME-DEGE 08L-M12 DME-DEGE 10L-M14 DME-DEGE 12L-M16 DME-DEGE 15L-M18 DME-DEGE 18L-M22

6 8

10 12 15 18

14 17 19 22 27 32

14 19 19 22 24 27

14 19 19 22 24 27

24.5 26.5 27.5 30.5 31.5 31.5

8 12 12 12 14 14

M10×1 M12×1.5 M14×1.5 M16×1.5 M18×1.5 M22×1.5

M12×1.5 M14×1.5 M16×1.5 M18×1.5 M22×1.5 M26×1.5

PN 160

DME-DEGE 22L-M26 DME-DEGE 28L-M33 DME-DEGE 35L-M42 DME-DEGE 42L-M48

22 28 35 42

36 41 50 60

32 41 50 55

32 40 50 55

32.5 35

42.5 46.5

16 18 20 22

M26×1.5 M33×2 M42×2 M48×2

M30×2 M36×2 M45×2 M52×2

S heavy

PN 630

DME-DEGE 06S-M12 DME-DEGE 08S-M14 DME-DEGE 10S-M16 DME-DEGE 12S-M18 DME-DEGE 14S-M20

6 8

10 12 14

17 19 22 24 27

17 19 22 24 27

17 19 22 24 26

27 29.5 32 34

36.5

12 12 12 12 14

M12×1.5 M14×1.5 M16×1.5 M18×1.5 M20×1.5

M14×1.5 M16×1.5 M18×1.5 M20×1.5 M22×1.5

PN 400

DME-DEGE 16S-M22 DME-DEGE 20S-M27 DME-DEGE 25S-M33 DME-DEGE 30S-M42

16 20 25 30

30 36 46 50

27 32 41 50

27 32 40 50

37 43 48 51

14 16 18 20

M22×1.5 M27×2 M33×2 M42×2

M24×1.5 M30×2 M36×2 M42×2

PN 315 DME-DEGE 38S-M48 38 60 55 55 60 22 M48×2 M52×2




Swivel Union with Cone DME-DUE

Series Part No. Tube O.D H L ι1 ι2

L

light

PN 500

DME-DUE 06L

DME-DUE 08L

DME-DUE 10L

6

8

10

17

17

19

64

64

67

36

36

37

34

34

36

PB 400

DME-DUE 12L

DME-DUE 15L

DME-DUE 18L

12

15

18

22

27

32

71

82

89.5

37

40

42.5

36

39

40.5

PB 250

DME-DUE 22L

DME-DUE 28L

DME-DUE 35L

DME-DUE 42L

22

28

35

42

36

46

50

60

102

110

127

139

47

49

58

59

45

47

53

53

S

heavy

PB800

DME-DUE 06S

DME-DUE 08S

DME-DUE 10S

6

8

10

17

19

22

71

73

78

39

39

43

37

37

41

PN 630

DME-DUE 12S

DME-DUE 14S

DME-DUE 16S

12

14

16

24

27

30

87

92

99

44

48

50

43

45

46

PN400

DME-DUE 20S

DME-DUE 25S

DME-DUE 30S

DME-DUE 38S

20

26

30

38

36

46

50

60

113

126

144

165

60

66

73

83

55

58

62

67




Banjo Fittings(BSP Paralled/Metric Paralled) with DKA-Ring DME-DSWVE-G/M

for BSP Paralled Series Part No. Tube

O.D D H h h1 L L1 ι ι1 ι2 T

G(PF) MA*

L light

PN 315

DME-DSWVE 06L-01G DME-DSWVE 08L-02G DME-DSWVE 10L-02G DME-DSWVE 12L-03G DME-DSWVE 15L-04G

6 8

10 12 15

14.5 18.5 18.5 22.5 26.5

14 17 19 22 27

14 19 19 22 27

14 19 19 22 27

25 28 29 30 34

21 27 27 32

37.5

10.5 13 14

15.5 19

6 9 9 9 11

10 13 13 15 18

1/8 1/4 1/4 3/8 1/2

20 45 45 70

100

PN 160 DME-DSWVE 18L-04G DME-DSWVE 22L-06G

18 22

26 32

32 36

30 36

27 32

37 42

44 49

20.5 25.5

11 13

21.5 24

1/2 3/4

100 140

S heavy

PB 250

DME-DSWVE 06S-02G DME-DSWVE 08S-02G DME-DSWVE 10S-03G DME-DSWVE 12S-03G DME-DSWVE 14S-04G

6 8

10 12 14

18.5 18.5 22.5 22.5 26.5

17 19 22 24 27

19 19 22 24 27

19 19 22 24 27

30 30 32 33 38

27 27 32 37 37

15 15 16 17 20

9 9 9 9 11

13 13 15 18 18

1/4 1/4 3/8 3/8 1/2

45 45 70 70

100

PB 160 DME-DSWVE 16S-04G DME-DSWVE 20S-06G

16 20

26 32

30 36

30 36

27 32

40 46

44 49

21.5 24.5

11 13

21.5 24

1/2 3/4

100 140

for Metric Paralled Series Part No. Tube

O.D D H h h1 L L1 ι ι1 ι2 T

G(PF) MA*

L light

PB 250

DME-DSWVE 06L-M10 DME-DSWVE 08L-M12 DME-DSWVE 10L-M14 DME-DSWVE 12L-M16 DME-DSWVE 15L-M18

6 8

10 12 15

14.5 17.5 19.5 21.5 23.5

14 17 19 22 27

14 17 19 22 24

14 17 19 22 24

25 27 29 30 33

21.5 25 27 32

37.5

10.5 12 14

15.5 17.5

6 9 9 9 9

10 12 13 15 18

M 10×1 M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5

25 40 55 65 90

PB 160 DME-DSWVE 18L-M22 DME-DSWVE 22L-M26

18 22

27 31

32 36

30 36

27 32

37 42

44 49

20.5 25.5

11 13

21.5 24

M 22×1.5 M 26×1.5

130 140

S heavy

PB 250

DME-DSWVE 06S-M12 DME-DSWVE 08S-M14 DME-DSWVE 10S-M16 DME-DSWVE 12S-M18 DME-DSWVE 14S-M20

6 8

10 12 14

17.5 19.5 21.5 23.5 25.5

17 19 22 24 27

17 19 22 24 27

17 19 22 24 27

29 30 32 33 38

25 27 32 37 37

14 15 16 17 20

9 9 9 9

11

12 13 15 18 18

M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 20×1.5

40 55 65 90

120 PB 160

bar DME-DSWVE 16S-M22 DME-DSWVE 20S-M27

16 20

27 32

30 36

30 36

27 32

40 46

44 49

21.5 24.5

11 13

21.5 24

M 22×1.5 M 27×2

130 150




High Pressure Banjo Fittings(BSP Paralled/Metric Paralled) with DKA-Ring DME-DWH-G/M

for BSP Paralled

Series Part No. Tube O.D D H h h1 L L1 ι ι1 ι2 T

G(PF) MA*

L light

PN 315

DME-DWH 06L-01G DME-DWH 08L-02G DME-DWH 10L-02G DME-DWH 12L-03G DME-DWH 15L-04G DME-DWH 18L-04G

6 8

10 12 15 18

14 18 18 22 26 26

14 17 19 22 27 32

17 22 22 27 32 32

17 19 19 24 30 30

27 29 30 33 37 37

24 30 30 36 45 45

12 14.5 15.5 18

21.5 21

8 12 12 12 14 14

10.5 14 14

16.5 21.5 21.5

2.5 3.0 3.0 3.0 4.5 4.5

1/8 1/4 1/4 3/8 1/2 1/2

20 50 50 75

130 130

PN 160

DME-DWH 22L-06G DME-DWH 28L-08G DME-DWH 35L-10G DME-DWH 42L-12G

22 28 35 42

32 39 49 55

36 41 50 60

41 50 60 70

36 46 55 60

44 49 58 63

53 66 76 87

27.5 32 36

40.5

16 18 20 22

24 30.5 35.5 40.5

3.5 3.5 3.5 3.5

3/4 1

1 1/4 1 1/2

250 350 600 800

S heavy

PB 250

DME-DWH 06S-02G DME-DWH 08S-02G DME-DWH 10S-03G DME-DWH 12S-03G DME-DWH 16S-04G DME-DWH 20S-06G

6 8

10 12 16 20

18 18 22 22 26 32

17 19 22 24 30 36

22 22 27 27 32 41

19 19 24 24 30 36

31 31 35 35 40 48

30 30 36 36 45 53

16.5 16.5 18.5 18.5 22

26.5

12 12 12 12 14 16

14 14

16.5 16.5 21.5 24

3.0 3.0 3.0 3.0 4.5 3.5

1/4 1/4 3/8 3/8 1/2 3/4

50 50 75 75

130 250

PB 160 DME-DWH 25S-08G DME-DWH 30S-10G DME-DWH 38S-12G

25 30 38

39 49 55

46 50 60

50 60 70

46 55 60

56 64 72

66 76 87

31.5 37

41.5

18 20 22

30.5 34.5 40.5

3.5 3.5 3.5

1 1 1/4 1 1/2

350 600 800


O.D D H h h1 L L1 ι ι1 ι2 t T G(PF)

MA*

L light

PB 250

DME-DWH 06L-M10 DME-DWH 08L-M12 DME-DWH 10L-M14 DME-DWH 12L-M16 DME-DWH 15L-M18 DME-DWH 18L-M22

6 8

10 12 15 18

14 17 19 21 23 27

14 17 19 22 27 32

17 22 22 27 30 32

17 19 19 24 27 30

27 29 30 33 36 37

24 30 30 36

39.5 45

12 14.5 15.5 18

20.5 21

8 12 12 12 12 14

10.5 14 14

16.5 18.5 21.5

2.5 3.0 3.0 3.0 3.0 4.5

M 10×1 M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 22×1.5

25 50 60 90

110 150

PB 160

DME-DWH 22L-M26 DME-DWH 28L-M33 DME-DWH 35L-M42 DME-DWH 42L-M48

22 28 35 42

31 39 49 55

36 41 50 60

41 50 60 70

36 46 55 60

44 49 58 63

53 66 76 87

27.5 32 36

40.5

16 18 20 22

24 30.5 35.5 40.5

3.5 3.5 3.5 3.5

M 26×1.5 M 33×2 M 42×2 M 48×2

350 400 600 800

S heavy

PB 250

DME-DWH 06S-M12 DME-DWH 08S-M14 DME-DWH 10S-M16 DME-DWH 12S-M18 DME-DWH 16S-M22 DME-DWH 20S-M27

6 8

10 12 16 20

17 19 21 23 27 32

17 19 22 24 30 36

22 22 27 30 32 41

19 19 24 27 30 36

31 31 35 36 40 48

30 30 36

39.5 45 53

16.5 16.5 18.5 20 22

26.5

12 12 12 12 14 16

14 14

16.5 18.5 21.5 24

3.0 3.0 3.0 3.0 4.5 3.5

M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 22×1.5 M 27×1.5

50 60 90

110 150 350

PB 160 bar

DME-DWH 16S-M22 DME-DWH 20S-M27 DME-DWH 20S-M27

25 30 38

39 49 55

46 50 60

50 60 70

46 55 60

56 64 72

66 76 87

31.5 37

41.5

18 20 22

30.5 35.5 40.5

3.5 3.5 3.5

M 33×2 M 42×2 M 48×2

400 600 800




High Pressure Banjo Fittings(BSP Paralled/Metric Paralled) DME-DTH-G/M

for BSP Paralled


G(PF) MAt

L light

PN 315

DME-DTH 06L-01G DME-DTH 08L-02G DME-DTH 10L-02G DME-DTH 12L-03G DME-DTH 15L-04G DME-DTH 18L-04G

6 8

10 12 15 18

14 18 18 22 26 26

14 17 19 22 27 32

17 22 22 27 32 32

17 19 19 24 30 30

27 29 30 33 37 37

24 30 30 36 45 45

12 14.5 15.5 18

21.5 21

8 12 12 12 14 14

10.5 14 14

16.5 21.5 21.5

2.5 3.0 3.0 3.0 4.5 4.5

1/8 1/4 1/4 3/8 1/2 1/2

20 50 50 75

130 130

PN 160

DME-DTH 22L-06G DME-DTH 28L-08G DME-DTH 35L-10G DME-DTH 42L-12G

22 28 35 42

32 39 49 55

36 41 50 60

41 50 60 70

36 46 55 60

44 49 58 63

53 66 76 87

27.5 32 36

40.5

16 18 20 22

24 30.5 35.5 40.5

3.5 3.5 3.5 3.5

3/4 1

1 1/4 1 1/2

250 350 600 800

S heavy

PB 250

DME-DTH 06S-02G DME-DTH 08S-02G DME-DTH 10S-03G DME-DTH 12S-03G DME-DTH 16S-04G DME-DTH 20S-06G

6 8

10 12 16 20

18 18 22 22 26 32

17 19 22 24 30 36

22 22 27 27 32 41

19 19 24 24 30 36

31 31 35 35 40 48

30 30 36 36 45 53

16.5 16.5 18.5 18.5 22

26.5

12 12 12 12 14 16

14 14

16.5 16.5 21.5 24

3.0 3.0 3.0 3.0 4.5 3.5

1/4 1/4 3/8 3/8 1/2 3/4

50 50 75 75

130 250

PB 160 DME-DTH 25S-08G DME-DTH 30S-10G DME-DTH 38S-12G

25 30 38

39 49 55

46 50 60

50 60 70

46 55 60

56 64 72

66 76 87

31.5 37

41.5

18 20 22

30.5 34.5 40.5

3.5 3.5 3.5

1 1 1/4 1 1/2

350 600 800


O.D D H h h1 L L1 ι ι1 ι2 t T G(PF)

MAt

L light

PB 315

DME-DTH 06L-M10 DME-DTH 08L-M12 DME-DTH 10L-M14 DME-DTH 12L-M16 DME-DTH 15L-M18 DME-DTH 18L-M22

6 8

10 12 15 18

14 17 19 21 23 27

14 17 19 22 27 32

17 22 22 27 30 32

17 19 19 24 27 30

27 29 30 33 36 37

24 30 30 36

39.5 45

12 14.5 15.5 18

20.5 21

8 12 12 12 12 14

10.5 14 14

16.5 18.5 21.5

2.5 3.0 3.0 3.0 3.0 4.5

M 10×1 M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 22×1.5

25 50 60 90

110 150

PB 160

DME-DTH 22L-M26 DME-DTH 28L-M33 DME-DTH 35L-M42 DME-DTH 42L-M48

22 28 35 42

31 39 49 55

36 41 50 60

41 50 60 70

36 46 55 60

44 49 58 63

53 66 76 87

27.5 32 36

40.5

16 18 20 22

24 30.5 35.5 40.5

3.5 3.5 3.5 3.5

M 26×1.5 M 33×2 M 42×2 M 48×2

350 400 600 800

S heavy

PB 400

DME-DTH 06S-M12 DME-DTH 08S-M14 DME-DTH 10S-M16 DME-DTH 12S-M18 DME-DTH 16S-M22 DME-DTH 20S-M27

6 8

10 12 16 20

17 19 21 23 27 32

17 19 22 24 30 36

22 22 27 30 32 41

19 19 24 27 30 36

31 31 35 36 40 48

30 30 36

39.5 45 53

16.5 16.5 18.5 20 22

26.5

12 12 12 12 14 16

14 14

16.5 18.5 21.5 24

3.0 3.0 3.0 3.0 4.5 3.5

M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 22×1.5 M 27×1.5

50 60 90

110 150 350

PB 250 DME-DTH 25S-M33 DME-DTH 30S-M42 DME-DTH 38S-M48

25 30 38

39 49 55

46 50 60

50 60 70

46 55 60

56 64 72

66 76 87

31.5 37

41.5

18 20 22

30.5 35.5 40.5

3.5 3.5 3.5

M 33×2 M 42×2 M 48×2

400 600 800




Throttlefree Banjo Fittings(BSP/Metric Paralled) with DKAZ-Ring DME-DSVW-G/M

for BSP Paralled


G(PF)

L light

PN 250

DME-DSVW 06L-01G DME-DSVW 08L-02G DME-DSVW 10L-02G DME-DSVW 12L-03G DME-DSVW 15L-04G

6 8

10 12 15

14 18 18 22 26

14 17 19 22 27

19 22 22 27 32

6 8 8

10 12

27 29 30 33 37

24 30 30 37 42

12.5 14.5 15.5 18 22

8 12 12 12 14

12 16 16 18 21

1/8 1/4 1/4 3/8 1/2

PN 100

DME-DSVW 18L-04G DME-DSVW 22L-06G DME-DSVW 28L-08G DME-DSVW 35L-10G DME-DSVW 42L-12G

18 22 28 35 42

26 32 39 49 55

32 36 41 50 60

36 46 50 60 65

12 17 22 27 32

38 45 48 57 63

46 58 64 76 85

21.5 28.5 31.5 35.5 40

14 16 18 20 22

23 28 32 37 42

1/2 3/4 1

1 1/4 1 1/2

S heavy

PB 400

DME-DSVW 06S-02G DME-DSVW 08S-02G DME-DSVW 10S-03G DME-DSVW 12S-03G DME-DSVW 14S-04G DME-DSVW 16S-04G DME-DSVW 20S-06G

6 8

10 12 14 16 20

18 18 22 22 26 26 32

17 19 22 24 27 30 36

22 22 27 27 32 36 46

8 8

10 10 12 12 17

31 31 35 35 41 41 49

30 30 37 37 42 46 58

16.5 16.5 18.5 18.5 23

22.5 27.5

12 12 12 12 14 14 16

16 16 18 18 21 23 28

1/4 1/4 3/8 3/8 1/2 1/2 3/4

PB 250 DME-DSVW 25S-08G DME-DSVW 30S-10G DME-DSVW 38S-12G

25 30 38

39 49 55

46 50 60

50 60 70

22 27 32

55 63 72

64 76 85

31 36.5 41

18 20 22

32 37 42

1 1 1/4 1 1/2


O.D D H h h1 L L1 ι ι1 ι2 T G(PF)

L light

PB 250

DME-DSVW 06L-M10 DME-DSVW 08L-M12 DME-DSVW 10L-M14 DME-DSVW 12L-M16 DME-DSVW 15L-M18

6 8

10 12 15

14 17 19 21 23

14 17 19 22 27

19 22 22 27 30

6 6 8

10 12

27 29 30 33 36

24 30 30 37 40

12.5 14.5 15.5 18 21

8 12 12 12 12

12 15 16 18 20

M 10×1 M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5

PB 100

DME-DSVW 18L-M22 DME-DSVW 22L-M26 DME-DSVW 28L-M33 DME-DSVW 35L-M42 DME-DSVW 42L-M48

18 22 28 35 42

27 31 39 49 55

32 36 41 50 60

36 41 50 60 65

14 17 22 27 32

38 42 48 57 63

46 51 64 76 85

21.5 26

31.5 35.5 40

14 16 18 20 22

23 25 32 37 42

M 26×1.5 M 33×2 M 42×2 M 48×2

S heavy

PB 400

DME-DSVW 06S-M12 DME-DSVW 08S-M14 DME-DSVW 10S-M16 DME-DSVW 12S-M18 DME-DSVW 14S-M20 DME-DSVW 16S-M22 DME-DSVW 20S-M27

6 8

10 12 14 16 20

17 19 21 23 25 27 32

17 19 22 24 27 30 36

22 22 27 30 32 36 46

6 8

10 12 12 14 17

31 31 35 37 41 41 49

30 30 37 41 42 46 58

16.5 16.5 18.5 20.5 23

22.5 27.5

12 12 12 12 14 14 16

15 16 18 20 21 23 28

M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 22×1.5 M 27×1.5

PB 250 DME-DSVW 25S-M33 DME-DSVW 30S-M42 DME-DSVW 38S-M48

25 30 38

39 49 55

46 50 60

50 60 70

46 55 60

56 64 72

66 76 87

31.5 37

41.5

18 20 22

30.5 35.5 40.5

M 33×2 M 42×2 M 48×2




Throttlefree Banjo Fittings(BSP/Metric Paralled) with DKAZ-Ring DME-DSVT-G/M

for BSP Paralled


G(PF)

L light

PB 250 bar

DME-DSVT 06L-01G DME-DSVT 08L-02G DME-DSVT 10L-02G DME-DSVT 12L-03G DME-DSVT 15L-04G

6 8

10 12 15

14 18 18 22 26

14 17 19 22 27

19 22 22 27 32

6 8 8

10 12

27 29 30 33 37

24 30 30 36 40

12 14 15

17.5 20

8 12 12 12 14

12 15 15 18 20

1/8 1/4 1/4 3/8 1/2

PB 100 bar

DME-DSVT 18L-04G DME-DSVT 22L-06G DME-DSVT 28L-08G DME-DSVT 35L-10G DME-DSVT 42L-12G

18 22 28 35 42

26 32 39 49 55

32 36 41 50 60

36 46 50 60 65

12 17 22 27 32

38 45 48 57 63

40 52 58 69 84

19.5 27

29.5 33 40

14 16 18 20 22

20 25 29 34 41

1/2 3/4 1

1 1/4 1 1/2

S heavy

PB 400 bar

DME-DSVT 06S-02G DME-DSVT 08S-02G DME-DSVT 10S-03G DME-DSVT 12S-03G DME-DSVT 14S-04G DME-DSVT 16S-04G DME-DSVT 20S-06G

6 8

10 12 14 16 20

18 18 22 22 26 26 32

17 19 22 24 27 30 36

22 22 27 27 32 36 46

8 8

10 10 12 12 17

31 31 35 35 41 41 49

30 30 36 36 42 42 57

16 16 18 18 22

21.5 28.5

12 12 12 12 14 14 16

15 15 18 18 21 21 28

1/4 1/4 3/8 3/8 1/2 1/2 3/4

PB 250 bar DME-DSVT 25S-08G DME-DSVT 30S-10G DME-DSVT 38S-12G

25 30 38

39 49 55

46 50 60

50 60 70

22 27 32

55 63 72

62 74 84

31 36.5 41

18 20 22

31 36 41

1 1 1/4 1 1/2


O.D D H h h1 L L1 ι ι1 ι2 T G(PF)

L light

PB 250 bar

DME-DSVT 06L-M10 DME-DSVT 08L-M12 DME-DSVT 10L-M14 DME-DSVT 12L-M16 DME-DSVT 15L-M18

6 8

10 12 15

14 17 19 21 23

14 17 19 22 27

19 22 22 27 30

6 6 8

10 12

27 28 30 32 35

24 27 30 36 39

12 13 15

17.5 20

8 12 12 12 12

12 14 15 18 19

M 10×1 M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5

PB 100 bar

DME-DSVT 18L-M22 DME-DSVT 22L-M26 DME-DSVT 28L-M33 DME-DSVT 35L-M42 DME-DSVT 42L-M48

18 22 28 35 42

27 31 39 49 55

32 36 41 50 60

36 41 50 60 65

14 17 22 27 32

37 41 46 55 63

41 46 58 69 84

20.5 24.5 29.5 33 40

14 16 18 20 22

20 22 29 33 41

M 22×1.5 M 26×1.5 M 33×2 M 42×2 M 48×2

S heavy

PB 400 bar

DME-DSVT 06S-M12 DME-DSVT 08S-M14 DME-DSVT 10S-M16 DME-DSVT 12S-M18 DME-DSVT 14S-M20 DME-DSVT 16S-M22 DME-DSVT 20S-M27

6 8

10 12 14 16 20

17 19 21 23 25 27 32

17 19 22 24 27 30 36

22 22 27 30 32 36 46

6 8

10 12 12 14 17

30 31 34 36 40 42 50

27 30 36 39 40 42 50

15 16 18

19.5 22

23.5 28.5

12 12 12 12 14 14 16

14 15 18 19 20 22 28

M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 20×1.5 M 22×1.5 M 27×1.5

PB 250 bar DME-DSVT 25S-M33 DME-DSVT 30S-M42 DME-DSVT 38S-M48

25 30 38

39 49 55

46 50 60

50 60 70

46 55 60

55 63 72

62 74 84

31 36.5 41

18 20 22

31 36 41

M 33×2 M 42×2 M 48×2




Pressure Gauge Connector(BSP Paralled) with DKL-Ring DME-DGC-G


d H h L ι ι1 ι2 T G(PF)

L light

PN 315

DME-DGC 06L-02G DME-DGC 08L-02G DME-DGC 10L-02G DME-DGC 12L-02G

6 8

10 12

2.5 5.5 5.5 5.5

14 17 19 22

19 19 19 19

37 37 38 38

7.5 7.5 8.5 8.5

14.5 14.5 14.5 14.5

4.5 4.5 4.5 4.5

1/4 1/4 1/4 1/4

S heavy

PN 630

DME-DGC 06S-04G DME-DGC 08S-04G DME-DGC 10S-04G DME-DGC 12S-04G

6 8

10 12

3.5 3.5 7.0 7.0

17 19 22 24

27 27 27 27

46 46 47 47

11 11

10.5 10.5

20 20 20 20

5 5 5 5

1/2 1/2 1/2 1/2

Swivel Gauge Adaptor (BSP Paralled) with cone and DKI-Ring DME-DGE-G


d H h L ι1 ι2 T G(PF)

L light

PN 315

DME-DGE 06L-02G DME-DGE 08L-02G DME-DGE 10L-02G DME-DGE 12L-02G

6 8

10 12

2.5 4

5.5 5.5

14 17 19 22

19

35.5 35.5 36 36

14.5 4.5 1/4

DME-DGE 06S-04G DME-DGE 08S-04G DME-DGE 10S-04G DME-DGE 12S-04G

6 8

10 12

2.5 4 6 7

17 19 22 24

27

42.5 43

43.5 45

20 5 1/2 S

heavy PN 630 DME-DGE 06S-02G

DME-DGE 08S-02G DME-DGE 10S-02G DME-DGE 12S-02G

6 8

10 12

2.5 4 6 7

17 19 22 24

19

35.5 35.5 36 39

14.5 4.5 1/4

Gauge Adaptor (BSP Paralled) with Standpipe and DKI-Ring DME-DGE-G


d H h L ι1 ι2 T G(PF)

L light

PN 315

DME-DGA 06L-02G DME-DGA 08L-02G DME-DGA 10L-02G DME-DGA 12L-02G

6 8

10 12

3.5 5.5 7.5 9

14 17 19 22

19

38 38

39.5 40.5

14.5 4.5 1/4

S heavy

PN 630

DME-DGA 06S-04G DME-DGA 08S-04G DME-DGA 10S-04G DME-DGA 12S-04G

6 8

10 12

3.5 4.5 6.5 7.5

17 19 22 24

27

45 45 47

47.5

20 5 1/2




Tee Test Coupling with threaded Connection DEMA 3-02G DME-DGMA

Series Part No. Tube O.D H h L ι S

L light

PN 315

DME-DGMA 3-06L DME-DGMA 3-08L DME-DGMA 3-10L DME-DGMA 3-12L DME-DGMA 3-15L DME-DGMA 3-18L

6 8

10 12 15 18

14 17 19 22 27 32

24 24 24 24 30 32

50 50 52 52 55 56

20.5 20.5 22.5 22.5 24.5 23.5

50 50 50 50 53 54

S heavy

PN 630

DME-DGMA 3-22L DME-DGMA 3-28L DME-DGMA 3-35L DME-DGMA 3-42L

22 28 35 42

36 41 50 60

36 41 46 55

60 61 69 70

27.5 27.5 25.5 24.5

56 58 61 65

DME-DGMA 3-06S DME-DGMA 3-08S DME-DGMA 3-10S DME-DGMA 3-12S DME-DGMA 3-14S

6 8

10 12 14

17 19 22 24 27

24 24 24 24 27

54 54 56 56 62

24.5 24.5 23.5 23.5 26.5

50 50 50 50 51

DME-DGMA 3-16S DME-DGMA 3-20S DME-DGMA 3-25S DME-DGMA 3-30S

16 20 25 30

30 36 46 50

30 36 41 46

62 69 75 81

25.5 25.5 26.5 27.5

53 56 58 61

DME-DGMA 3-38S 38 60 55 90 29 65 Test Coupling with threaded connection M16 DME-DEMA3

PB Part No. D3 h i S1 T

PB 630

DME-DEMA3-01G DME-DEMA3-02G DME-DEMA3-03G DME-DEMA3-04G

14 18 22 26

41

8 10 12 14

17 19 22 27

PF 1/8 PF 1/4 PF 3/8 PF 1/2

PB 630

DME-DEMA3-M10 DME-DEMA3-M12 DME-DEMA3-M14 DME-DEMA3-M16

14 17 19 21

41

8 12 12 12

17 17 19 22

M 10×1 M 12×1.5 M 14×1.5 M 16×1.5




Welding Connector DME-DAS

Series Part No. Tube O.D D H h L ι

L light

PN 315

DME-DAS-06L DME-DAS-08L DME-DAS-10L DME-DAS-12L DME-DAS-15L DME-DAS-18L

6 8

10 12 15 18

10 12 14 16 19 22

14 17 19 22 27 32

12 14 17 19 22 27

29 31 33 33 37 40

14 16 18 18 22

23.5

PN 160

DME-DAS-22L DME-DAS-28L DME-DAS-35L DME-DAS-42L

22 28 35 42

27 32 40 46

36 41 50 60

32 41 46 55

45 47 54 58

28.5 30.5 32.5 35

S heavy

PN 630

DME-DAS-06S DME-DAS-08S DME-DAS-10S DME-DAS-12S DME-DAS-14S

6 8

10 12 14

11 13 15 17 19

17 19 22 24 27

14 17 19 22 24

34 36 39 41 45

19 21

22.5 24.5 27

PN 400

DME-DAS-16S DME-DAS-20S DME-DAS-25S DME-DAS-30S

16 20 25 30

21 26 31 36

30 36 46 50

27 32 41 46

45 51 56 62

26.5 29.5 32

35.5 PN 315 DME-DAS-38S 38 44 60 55 69 38

Welding Connector with DAK DME-DASK

Series Max.Pressure

Part No. Tube O.D D

d H h L ι

PB 248 PB 357 PB 458

DME-DASK 10×1.0 DME-DASK 10×1.5 DME-DASK 10×2.0

10 8 7 6

22 19 58 10

PB 303 PB 391 PB 474


12 9 8 7

24 22 65 15

PB 234 PB 303 PB 370 PB 433

DME-DASK 16×1.5 DME-DASK 16×2.0 DME-DASK 16×2.5 DME-DASK 16×3.0

16

13 12 11 10

30 27 74.5 16.5

PB 249 PB 305 PB 357 PB 458


20

16 15 14 12

36 32 84 19

PB 292 PB 378 PB 458


25 19 17 15

46 41 94.5 19.5

PB 248 PB 321 PB 391 PB 460


30

24 22 20 18

50 46 102 23

PB 260 PB 318 PB 373 PB 427


38

30 28 26 24

60 55 111 23




Welding Nipple with * O-Ring DME-DAK

Pressure Rating Fittings DAK and Tube

Part No. Tube O.D D

d L ι

PN 630 PB 248 PB 357 PB 458

DME-DAK 10×1.0 DME-DAK 10×1.5 DME-DAK 10×2.0

10 8 7 6

35.5 33

PN 630 PB 303 PB 391 PB 474


12 9 8 7

35.5 33

PN 400

PB 234 PB 303 PB 370 PB 433

DME-DAK 16×1.5 DME-DAK 16×2.0 DME-DAK 16×2.5 DME-DAK 16×3.0

16

13 12 11 10

42.5 39

PN 400

PB 249 PB 305 PB 357 PB 458


20

16 15 14 12

47.5 43.5

PN 400 PB 292 PB 378 PB 458


25 19 17 15

55 49.5

PN 400

PB 248 PB 321 PB 391 PB 460


30

24 22 20 18

58.5 51.5

PN 315

PB 260 PB 318 PB 373 PB 427


38

30 28 26 24

66 56.5

Reducing Welding Nipple with * O-Ring DME-DAKR

Pressure Rating Tube O.D Fittings DAKR and Tube

Part No. D1 D2

d1 d2 L1 L ι

PN 630

PB 526 PB 526 PB 526 PB 357

DME-DAKR 1006×1.5 DME-DAKR 1008×2.0 DME-DAKR 1208×2.0 DME-DAKR 1210×1.5

10 10 12 12

6 8 8

10

3 4 4 7

5 - 6 -

37.5 37.5 37.5 37.5

35 35 35 35

12 12 14 14

PN 400

PB 474 PB 474 PB 433 PB 433 PB 458 PB 303 PB 303 PB 292

DME-DAKR 1612×2.5 DME-DAKR 2012×2.5 DME-DAKR 2016×3.0 DME-DAKR 2516×3.0 DME-DAKR 2520×4.0 DME-DAKR 3016×2.0 DME-DAKR 3020×2.5 DME-DAKR 3025×3.0

16 20 20 25 25 30 30 30

12 12 16 16 20 16 20 25

7 7

10 10 12 12 15 19

- - - - - - - -

46.5 51.5 53.5 56.5 59.5 67 70 70

43 47.5 49.5 51 54 60 63 63

15 15 17 17 20 17 20 20

PN 315

PB 303 PB 303 PB 292 PB 321

DME-DAKR 3816×2.0 DME-DAKR 3820×2.5 DME-DAKR 3825×3.0 DME-DAKR 3830×4.0

38 38 38 38

16 20 25 30

12 15 19 22

- - - -

79 82 82 82

69.5 72.5 72.5 72.5

17 20 20 20




Male Female Adaptor (BSP Paralled) DME-MFAD

PB Part No. H K L ι ι1

Male stud T G(PF)

Female stud T1

G(PF) PB 630 DME-MFAD 03-01G 22 22 22.5 12 8 3/8 1/8 PB 630 PB 400

DME-MFAD 04-01G DME-MFAD 04-02G

27 27

26 26

24 24

14 14

8 12

1/2 1/2

1/8 1/4

PB 400 DME-MFAD 06-02G DME-MFAD 06-03G

32 32

32 32

26 26

16 16

12 12

3/4 3/4

1/4 3/8

PB 400 DME-MFAD 08-02G DME-MFAD 08-03G DME-MFAD 08-04G

41 41 41

39 39 39

29 29 29

18 18 18

12 12 14

1 1 1

1/4 3/8 1/2

PB 250 DME-MFAD 10-04G DME-MFAD 10-06G

50 50

49 49

32 32

20 20

14 16

1 1/4 1 1/4

1/2 3/4

PB 250 DME-MFAD 12-04G DME-MFAD 12-06G DME-MFAD 12-08G

55 55 55

55 55 55

36 36 36

22 22 22

14 16 18

1 1/2 1 1/2 1 1/2

1/2 3/4 1

Male Female Adaptor (BSP Paralled) DME-MFAE

PB Part No. d H K L ι ι1

Male stud T G(PF)

Female stud T1

G(PF)

PB 630 DME-MFAE 01-02G DME-MFAE 01-03G

4 4

19 24

14 14

31 32

8 8

17 17

1/8 1/8

1/4 3/8

PB 630

PB 400

DME-MFAE 02-01G DME-MFAE 02-03G DME-MFAE 02-04G DME-MFAE 02-06G

5 5 5 5

19 24 30 36

18 18 18 18

28 36 40 43

12 12 12 12

12 17 20 22

1/4 1/4 1/4 1/4

1/8 3/8 1/2 3/4

PB 630

PB 250

DME-MFAE 03-02G DME-MFAE 03-04G DME-MFAE 03-06G

8 8 8

22 30 36

22 22 22

36 41 44

12 12 12

17 20 22

3/8 3/8 3/8

1/4 1/2 3/4

PB 400

PB 250


12 12 12 10

27 36 41 55

26 26 26 26

36 46 49 53

14 14 14 14

17 22

24.5 26.5

1/2 1/2 1/2 1/2

3/8 3/4 1

1 1/4 PB 400

PB 250


16 16 16 16

32 41 55 60

32 32 32 32

41 41 55 57

16 16 16 16

20 24.5 26.5 28.5

3/4 3/4 3/4 3/4

1/2 1

1 1/4 1 1/2

PB 400

PB 250

DME-MFAE 08-06G DME-MFAE 08-10G DME-MFAE 08-12G

20 20 20

41 55 60

39 39 39

47 57 59

18 18 18

22 26.5 28.5

1 1 1

3/4 1 1/4 1 1/2

PB 250 DME-MFAE 10-08G DME-MFAE 10-12G

25 25

50 60

49 49

52 60

20 20

24.5 28.5

1 1/4 1 1/4

1 1 1/2

PB 250 DME-MFAE 12-10G 32 55 55 58 22 26.5 1 1/2 1 1/4 PB 250 DME-MFAE 16-12G 40 70 68 62 24 28.5 2 1 1/2




Male Female Adaptor (BSP Paralled) with * ED-Ring DME-MFAD-ED

PB Part No. H K L ι ι1

Male stud T G(PF)

Female stud T1

G(PF) PB 630 DME-MFAD 03ED-01G 22 22 22.5 12 8 3/8 1/8 PB 630 PB 400

DME-MFAD 04ED-01G DME-MFAD 04ED-02G

27 27

26 26

24 24

14 14

8 12

1/2 1/2

1/8 1/4

PB 400 DME-MFAD 06ED-02G DME-MFAD 06ED-03G

32 32

32 32

26 26

16 16

12 12

3/4 3/4

1/4 3/8

PB 400 DME-MFAD 08ED-02G DME-MFAD 08ED-03G DME-MFAD 08ED-04G

41 41 41

39 39 39

29 29 29

18 18 18

12 12 14

1 1 1

1/4 3/8 1/2

PB 250 DME-MFAD 10ED-04G DME-MFAD 10ED-06G

50 50

49 49

32 32

20 20

14 16

1 1/4 1 1/4

1/2 3/4

PB 250 DME-MFAD 12ED-04G DME-MFAD 12ED-06G DME-MFAD 12ED-08G

55 55 55

55 55 55

36 36 36

22 22 22

14 16 18

1 1/2 1 1/2 1 1/2

1/2 3/4 1

Male Female Adaptor (BSP Paralled) with *ED-Ring DME-MFAE-ED

PB Part No. d H K L ι ι1

Male stud T G(PF)

Female stud T1

G(PF)

PB 630 DME-MFAE 01ED-02G DME-MFAE 01ED-03G

4 4

19 24

14 14

31 32

8 8

17 17

1/8 1/8

1/4 3/8

PB 630

PB 400

DME-MFAE 02ED-01G DME-MFAE 02 ED-03G DME-MFAE 02 ED-04G DME-MFAE 02ED-06G

5 5 5 5

19 24 30 36

18 18 18 18

28 36 40 43

12 12 12 12

12 17 20 22

1/4 1/4 1/4 1/4

1/8 3/8 1/2 3/4

PB 630

PB 250

DME-MFAE 03ED-02G DME-MFAE 03ED-04G DME-MFAE 03ED-06G

8 8 8

22 30 36

22 22 22

36 41 44

12 12 12

17 20 22

3/8 3/8 3/8

1/4 1/2 3/4

PB 400

PB 250

DME-MFAE 04ED-03G DME-MFAE 04ED-06G DME-MFAE 04ED-08G DME-MFAE 04ED-10G

12 12 12 10

27 36 41 55

26 26 26 26

36 46 49 53

14 14 14 14

17 22

24.5 26.5

1/2 1/2 1/2 1/2

3/8 3/4 1

1 1/4 PB 400

PB 250

DME-MFAE 06ED-04G DME-MFAE 06ED-08G DME-MFAE 06ED-10G DME-MFAE 06ED-12G

16 16 16 16

32 41 55 60

32 32 32 32

41 41 55 57

16 16 16 16

20 24.5 26.5 28.5

3/4 3/4 3/4 3/4

1/2 1

1 1/4 1 1/2

PB 400

PB 250

DME-MFAE 08ED-06G DME-MFAE 08ED-10G DME-MFAE 08ED-12G

20 20 20

41 55 60

39 39 39

47 57 59

18 18 18

22 26.5 28.5

1 1 1

3/4 1 1/4 1 1/2

PB 250 DME-MFAE 10ED-08G DME-MFAE 10ED-12G

25 25

50 60

49 49

52 60

20 20

24.5 28.5

1 1/4 1 1/4

1 1 1/2

PB 250 DME-MFAE 12ED-10G 32 55 55 58 22 26.5 1 1/2 1 1/4 PB 250 DME-MFAE 16ED-12G 40 70 68 62 24 28.5 2 1 1/2




Blanking Plugs for Port with *ED-Ring DME-DVSTI-GED/MED

PB Part No.(M) Part No.(G) T M(Metric)

T G(PF) D H L ι1

400

DME-DVSTI-M10ED DME-DVSTI-M12ED DME-DVSTI-M14ED DME-DVSTI-M16ED DME-DVSTI-M18ED DME-DVSTI-M20ED DME-DVSTI-M22ED DME-DVSTI-M26ED DME-DVSTI-M27ED DME-DVSTI-M33ED

DME-DVSTI-01GED -

DME-DVSTI-02GED DME-DVSTI-03GED

- -

DME-DVSTI-04GED -


M 10×1 M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 20×1.5 M 22×1.5 M 26×1.5 M 27×2 M 33×2

1/8 -

1/4 3/8

- -

1/2 -

3/4 1

14 17 19 22

23.9 25.9 27

31.9 32

39.9

5 6 6 8 8

10 10 12 12 17

12 17 17 17 17 19 19 21 21

22.5

8 12 12 12 12 14 14 16 16 16

250 DME-DVSTI-M42ED DME-DVSTI-M48ED


M 42×2 M 48×2

1 1/4 1 1/2

49.9 55

22 24

22.5 22.5

16 16

Blanking Plugs with *O-Ring (accord, to ISO 6149-3/DIN 3582) DME-DVSTI

PB Part No. T M(Metric) D H L ι1

630

DME-DVSTI-M10 DME-DVSTI-M12 DME-DVSTI-M14 DME-DVSTI-M16 DME-DVSTI-M18

M 10×1 M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5

13 17 19 21 23

5 6 6 6 8

14 16.5 16.5 18

19.5

10 11.5 11.5 13

14.5

400

DME-DVSTI-M22 DME-DVSTI-M26 DME-DVSTI-M27 DME-DVSTI-M33 DME-DVSTI-M42

M 22×1.5 M 26×1.5 M 27×2 M 33×2 M 42×2

27 31 32 38 48

10 12 12 17 22

20.5 21 24

25.5 26

15.5 16 19 19

19.5




Blanking Plug with *O-Ring DME-DVKA

Series Part No.(M) Tube O.D D

L

L light

PN 315/PN630

DME-DVKA-06L/S DME-DVKA-08L/S DME-DVKA-10L/S DME-DVKA-12L/S DME-DVKA-15L DME-DVKA-18L

6 8

10 12 15 18

18.5 18.5 20

20.5 20.5 22.5

PN 160

DME-DVKA-22L DME-DVKA-28L DME-DVKA-35L DME-DVKA-42L

22 28 35 42

25 25.5 30 30

S heavy PN 630 DME-DVKA-14S 14 22.5

PN 400

DME-DVKA-16S DME-DVKA-20S DME-DVKA-25S DME-DVKA-30S

16 20 25 30

23.5 28.5 29

30.5 PN 315 DME-DVKA-38S 38 33

Tube Cap DME-DCA

Series Part No.(M) Tube O.D H h L ι

L

light

PN 315

DME-DCA-06L

DME-DCA-08L

DME-DCA-10L

DME-DCA-12L

DME-DCA-15L

DME-DCA-18L

6

8

10

12

15

18

14

17

19

22

27

32

12

14

17

19

24

27

22

23

24

25

26

28

7

8

9

10

11

11.5

PN 160

DME-DCA-22L

DME-DCA-28L

DME-DCA-35L

DME-DCA-42L

22

28

35

42

36

41

50

60

32

41

46

55

30

31

36

39

13.5

14.5

14.5

16

S

heavy

PN 630

DME-DCA-06S

DME-DCA-08S

DME-DCA-10S

DME-DCA-12S

DME-DCA-14S

6

8

10

12

14

17

19

22

24

27

14

17

19

22

24

26

28

29

31

34

11

13

12.5

14.5

16

PN 400

DME-DCA-16S

DME-DCA-20S

DME-DCA-25S

DME-DCA-30S

16

20

25

30

30

36

46

50

27

32

41

46

34

39

44

47

15.5

17.5

20

20.5

PN 315 DME-DCA-38S 38 60 55 54 23




Tube Insert DME- DIL

*Bulkhead Lock Nut DME- DLN

Part No.(M) Tube O.D Tube O.D d D L DME-DIL 6-1 6 4 2.6 3.8 15.5

DME-DIL 6-0.75 6 4.5 3.1 4.3 12.5 DME-DIL 6-0.5 6 5 3.6 4.8 15.5 DME-DIL 8-1 8 6 4.6 5.8 15.5

DME-DIL 10-1.5 10 7 5.6 6.8 17 DME-DIL 10-1 10 8 6.6 7.8 16.5

DME-DIL 12-1.5 12 9 7.6 8.8 16.5 DME-DIL 12-1 12 10 8.6 9.8 16.5

DME-DIL 15-1.5 15 12 10.2 11.8 17 DME-DIL 15-1 15 13 11.2 12.8 17 DME-DIL 16-1 16 14 12.2 13.8 17

DME-DIL 18-1.5 18 15 13.2 14.8 17.5 DME-DIL 18-1 18 16 14.2 15.8 17.5

DME-DIL 20-1.5 20 17 15.2 16.8 20 DME-DIL 20-1 20 18 16.2 17.8 22

DME-DIL 22-1.5 22 19 17.2 18.8 18 DME-DIL 22-1 22 20 18.2 19.8 18 DME-DIL 25-2 25 21 19.2 20.8 21.5

DME-DIL 25-1.5 25 22 20.2 21.8 23.5 DME-DIL 28-2 28 24 22.2 23.8 18

DME-DIL 28-1.5 28 25 23.2 24.8 18 DME-DIL 30-2 30 26 24.2 25.8 23.5 DME-DIL 35-2 35 31 28.8 30.8 22.5 DME-DIL 38-3 38 32 29.8 31.8 26.5

DME-DIL 38-2.5 38 33 30.8 32.8 26.5 DME-DIL 42-2 42 38 35.8 37.8 23.5

Tube O.D Series Part No.

Light Heavy H L T

L DME-DLN 06L 6 - 17 M 12×1.5 L/S DME-DLN 08L-06S 8 6 19 M 14×1.5 L/S L/S S

DME-DLN 10L-08S DME-DLN 12L-10S

DME-DLN 12S

10 12 -

8 10 12

22 24 27

6 M 16×1.5 M 18×1.5 M 20×1.5

L/S S

DME-DLN 15L-14S DME-DLN 16S

15 -

14 16

30 32

7 M 22×1.5 M 24×1.5

L L/S

DME-DLN 18L DME-DLN 22L-20S

18 22

- 20

36 41

8 M 26×1.5 M 30×2

L/S S L

DME-DLN 28L-25S DME-DLN 30S DME-DLN 35L

28 -

35

25 30 -

46 50 55

9 M 36×2 M 42×2 M 45×2

L/S DME-DLN 42L-38S 42 38 65 10 M 52×2




Sealing rings for DWH/DTH and DSWVE DME-DKA

Sealing rings for DSVW/DSVT DME-DKAZ

Part No. External Thread DME-DKA-01G DME-DKA-02G DME-DKA-03G DME-DKA-04G

DME-DKA-04G×4.5 DME-DKA-06G DME-DKA-08G

DME-DKA-10GM42 DME-DKA-12GM48

PF 1/8 PF 1/4 PF 3/8 PF 1/2 PF 1/2 PF 3/4 PF 1

PF 1 1/4/M42×2 PF 1 1/2/M48×2

DME-DKA-M10 DME-DKA-M12 DME-DKA-M14 DME-DKA-M16 DME-DKA-M18 DME-DKA-M20 DME-DKA-M22

DME-DKA-M22×4.5 DME-DKA-M26

DME-DKA-M26×3.5 DME-DKA-M27 DME-DKA-M33

M 10×1 M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 20×1.5 M 22×1.5 M 22×1.5 M 26×1.5 M 26×1.5 M 27×2 M 33×2

Part No. External Thread DME-DKAZ-01G DME-DKAZ-02G DME-DKAZ-03G DME-DKAZ-04G

DME-DKAZ-04G×4.5 DME-DKAZ-06G DME-DKAZ-08G

DME-DKAZ-10GM42 DME-DKAZ-12GM48

PF 1/8 PF 1/4 PF 3/8 PF 1/2 PF 1/2 PF 3/4 PF 1

PF 1 1/4/M42×2 PF 1 1/2/M48×2

DME-DKAZ-M10 DME-DKAZ-M12 DME-DKAZ-M14 DME-DKAZ-M16 DME-DKAZ-M18 DME-DKAZ-M20 DME-DKAZ-M22

DME-DKAZ-M22×4.5 DME-DKAZ-M26

DME-DKAZ-M26×3.5 DME-DKAZ-M27 DME-DKAZ-M33

M 10×1 M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 20×1.5 M 22×1.5 M 22×1.5 M 26×1.5 M 26×1.5 M 27×2 M 33×2

Sealing rings for DGC DME-DKI

Part No. Internal Thread

DME-DKI-02G

DME-DKI-04G

PF 1/4

PF 1/2

ED-Ring KP-B-S

O-Rings KP-B-DS

For Male Thread Part No. Metric G(PF)

KP-B-S M8 KP-B-S01G

M 8×1 M 10×1

- 1/8

KP-B-SM12 KP-B-S02G KP-B-SM16 KP-B-S03G KP-B-SM18 KP-B-SM20 KP-B-S04G KP-B-SM22

M 12×1.5 M 14×1.5 M 16×1.5

- M 18×1.5 M 20×1.5

- M 22×1.5

1/4 -

3/8 - -

1/2 -

KP-B-S06G M 26×1.5 M 27×2

3/4

KP-B-S08G KP-B-S10G KP-B-S12G

M 33×2 M 42×2 M 48×2

1 1 1/4 1 1/2

Part No. D T

KP-B-DS06 KP-B-DS08 KP-B-DS10 KP-B-DS12 KP-B-DS14 KP-B-DS16 KP-B-DS18 KP-B-DS20

4 6

7.5 9

10 12 15

16.3

1.5 1.5 1.5 1.5 2 2 2

2.4

KP-B-DS22 KP-B-DS25 KP-B-DS30 KP-B-DS28 KP-B-DS35 KP-B-DS38 KP-B-DS42

20 20.3 25.3 26 32

33.3 38

2 2.4 2.4 2

2.5 2.4 2.5




Tube end Dimension Nut

DME-DN Cutting Ring DME-DS

Series Part No.

Nut Part No.

Cutting Ring Tube O.D

DN Size

D D1 d H L M ι ι1

LL very light

DME-DN-04LL DME-DN-06LL DME-DN-08LL DME-DN-10LL DME-DN-12LL

DME-DS-04LL DME-DS-06LL DME-DS-08LL DME-DS-10LL DME-DS-12LL

4 6 8

10 12

3 4 6 8

10

4 6 8

10 12

5 7.5 9.5

11.5 13.5

3 4.5 6 8

10

10 12 14 17 19

11.5 12

12.5 12.5 13

M 8×1.0 M 10×1.0 M 12×1.0 M 14×1.0 M 16×1.0

4 5.5 5.5 6 6

8 8 9 9 9

DME-DN-06L DME-DN-08L DME-DN-10L DME-DN-12L DME-DN-15L DME-DN-18L

DME-DS-06 DME-DS-08 DME-DS-10 DME-DS-12 DME-DS-15 DME-DS-18

6 8

10 12 15 18

4 6 8

10 12 16

6 8

10 12 15 18

8.1 10.1 12.3 14.3 17.3 20.3

4 6 8

10 12 15

14 17 19 22 27 32

15 15 16 16

17.5 18

M 12×1.5 M 14×1.5 M 16×1.5 M 18×1.5 M 22×1.5 M 26×1.5

7 7 7 7 7

7.5

10 10 11 11 12 12

L light

DME-DN-22L DME-DN-28L DME-DN-35L DME-DN-42L

DME-DS-22 DME-DS-28 DME-DS-35 DME-DS-42

22 28 35 42

20 25 32 40

22 28 35 42

24.3 30.3 38 45

19 24 30 36

36 41 50 60

20.5 21 24 24

M 30×2 M 36×2 M 45×2 M 52×2

7.5 7.5

10.5 11

14 14 16 16

DME-DN-06S DME-DN-08S DME-DN-10S DME-DN-12S DME-DN-14S

DME-DS-06 DME-DS-08 DME-DS-10 DME-DS-12 DME-DS-14

6 8

10 12 14

3 4 6 8

10

6 8

10 12 14

8.1 10.1 12.3 14.3 16.3

4 5 7 8

10

17 19 22 24 27

16.5 16.5 17.5 18

20.5

M 14×1.5 M 16×1.5 M 18×1.5 M 20×1.5 M 22×1.5

7 7

7.5 7.5 8

12 12 12 12 14

DME-DN-16S DME-DN-20S DME-DN-25S DME-DN-30S

DME-DS-16 DME-DS-20 DME-DS-25 DME-DS-30

16 20 25 30

12 16 20 25

16 20 25 30

18.3 22.9 27.9 33

12 16 20 25

30 36 46 50

21 24 27

29.5

M 24×1.5 M 30×2 M 36×2 M 42×2

8.5 10.5 12

13.5

14 16 18 20

S heavy

DME-DN-38S DME-DS-38 38 32 38 41 32 60 32.5 M 52×2 16 22

Documents

Piping System – Tube Fittings - … Fittings.pdf · · 2014-06-13Based Standard DIN 3851 DME-DIV. DIN fittings ... Pressure and temperature load Capability Steel Brass ... •