2
Great Hardscapes Start Here ® ALBERTA • BRITISH COLUMBIA • CALIFORNIA • COLORADO • IDAHO • NEVADA • OREGON • WASHINGTON • WYOMING ©2017 Basalite ® Concrete Products, LLC. All trademarks ® are registered trademarks. BA656_CA 3000 3/13/2017 PAVERS | WALLS | OUTDOOR LIVING KITS a division of Basalite Building Products Front, back and inside photos 3 x 18 Plank Paver in blend of Granite Bay, Truckee and Mount Shasta Find Or Follow Us On www.basalite.com Plank Paver INTERLOCKING PAVING STONES

Plank Paver - Basalite Concrete ProductsFront, back and inside photos 3 x 18 Plank Paver in blend of Granite Bay, Truckee and Mount Shasta Find Or Follow Us On Plank Paver INTERLOCKING

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Plank Paver - Basalite Concrete ProductsFront, back and inside photos 3 x 18 Plank Paver in blend of Granite Bay, Truckee and Mount Shasta Find Or Follow Us On Plank Paver INTERLOCKING

Great Hardscapes Start Here®

ALBERTA • BRITISH COLUMBIA • CALIFORNIA • COLORADO • IDAHO • NEVADA • OREGON • WASHINGTON • WYOMING

©2017 Basalite® Concrete Products, LLC. All trademarks ® are registered trademarks. BA656_CA 3000 3/13/2017

PAVERS | WALLS | OUTDOOR LIVING KITS

a division of Basalite Building Products

Front, back and inside photos 3 x 18 Plank Paver in blend of Granite Bay, Truckee and Mount Shasta

Find Or Follow Us On

www.basalite.com

Plank PaverINTERLOCKING PAVING STONES

Page 2: Plank Paver - Basalite Concrete ProductsFront, back and inside photos 3 x 18 Plank Paver in blend of Granite Bay, Truckee and Mount Shasta Find Or Follow Us On Plank Paver INTERLOCKING

SIERRA COLLECTION COLORS

NOTE: Printed colors shown in this brochure may vary from actual product colors. We recommend selecting colors from actual product samples.

8000 Honey(Left paver shown sealed)

4222 Amber(Left paver shown sealed)

8000 Teal Green Small Mirror(Left paver shown sealed)

4000 River Mix(Left paver shown sealed)

6020 Honey Small Mirror(Left paver shown sealed)

4000/8021 Sunshine(Left paver shown sealed)

2073 Sunshine(Left paver shown sealed)

2351 Moss Green(Left paver shown sealed)

2023 Moss Green(Left paver shown sealed)

2023 Teal Green(Left paver shown sealed)

2023 Small Mirror(Left paver shown sealed)

2023 Large Mirror(Left paver shown sealed)

Mt. Shasta(Stock Color)

Granite Bay(Stock Color)

Yosemite Emerald Bay

Tahoe City Sacramento

Chico Auburn

Woodbridge St. Helena

Napa Truckee(Stock Color)

1. Excavate unsuitable, unstable or unconsolidated sub-grade material and compact the area, which has been cleared.Backfill and level with 3/4” road base, suitable for walkways and road/driveways (typically 3” - 6” for pedestrian walk-ways and 8” - 10” for driveway applications), or as otherwise directed by site engineer/architect/landscape architect.

2. Place bedding course of Sakrete® All Purpose Sand or concrete sand to a uniform depth of approximately 1” leveled to grade.

3. Layout the desired location of your paverswith a string line or marking paint. Installpavers hand tight, following your pattern and extending the pavers over your lines.

4. Following all manufacturer’s instructions,cut your pavers with a cutting tool. When cutting pavers, mark the line that you wish tocut and, using your desired cutting device,make a clean, vertical cut. Ensure the fit is accurate and tight. There are four methods to use when cutting your pavers, choose themethod according to your skill and comfort level.1. Use a skill or rotary saw with a diamond blade2. Use a masonry or table saw3. Use a hammer and chisel4. Use a paver guillotine splitter.

5. Install edge restraints using plastic or metal paver rail edging and metal spikes, concrete, or concretecurbing. The edge restraint should fit tightly against the pavers to prevent any paver movement.

6. Tamp pavers with mechanical vibrator,uniformly level, true to grade and free of movement. Textured pavers require arubber pad for the vibrator, to reduce scuffing on the paver tops.

7. Fill voids in paver joints by sweeping dry, fine, sharp sand over pavers.

8. After sweeping the sand into the joints, tamp the pavers with a mechanical vibrator. This will set the sand down intothe pavers. Textured pavers require a rubber pad for the vibrator, to reduce scuffing on the paver tops.

9. Sweep the sand one last time into the paver joints, filling any voids. After the sand has been swept into the pavers,remove any sand dust from the tops of the pavers by lightly blowing the tops using a leaf-blower or an air hose.

PAVER INSTALLATION*

Edge Restraint

Compacted Aggregate Base

Compacted Soil Subgrade

Joint Sand

Basalite® Paver Base

Basalite® Interlocking Paving Stones

Sakrete®

All Purpose Sand

GROUND FACE/SHOT BLAST COLORSSURFACE TEXTURES

Weight: 16 lbsUnits/Pallet: 168Sq. Ft./Pallet: 60

Weight: 8 lbsUnits/Pallet: 420Sq. Ft./Pallet: 75.6

100 mm

18”

3”

100 mm

9” 3”

Durable and perfect for high traffic areas, Basalite’s Plank Paver

is sleek and exudes ultra modern appeal. Available in two

sizes, the Plank Paver is sure to make an impact in any

residential or commercial landscape project.

Plank PaverINTERLOCKING PAVING STONES

SPECIFICATIONS

8p8

3 x 9 Plank Paver in Granite Bay

PATTERNS

Mixed Running Bond50% 3” x 18”and 50% 3” x 9”

Running Bond100% 3” x 18” or 3” x 9”

Herringbone100% 3” x 18” or 3” x 9”

Basket Weave100% 3” x 18” or 3” x 9”

8

Customizeyour finish.

Choose from anarray of beautiful

colors and surface textures.

*The installation instructions and illustrations shown are a basic overview of paver installation methods. Due to the variety of applications, please refer to the Basalite® installation guide, or visit us online at basalite.com.

Smooth

Ground Face

Shot Blast