.

()

()

http://www.schindler.com/

＜

.

＞

All dimensions in mm. Observe national regulations!Subject to changes.

Transportation dimensions

Detail Z

Step width (mm)

A: Step width

B: Width betwee n handrai ls

C: Handra i l outer distance

D: Width of escalator

E: Width of pit

Hmax: M a x i m u m rise

Step width Rise Weight Support loads Transp. dimensions

A H R1 R2 Balustrade height 1000

m m m m k N k N k N h l

All dimensions in mm. Observe national regulations!Subject to changes.

1)If H > 6m, an intermediate support may be required. Please consult Schindler.2) Delivery in 2 parts.

Transportation dimensions

Detail Z

Step width (mm)

A: Step width

B: Width betwee n handrai ls

C: Handra i l outer distance

D: Width of escalator

E: Width of pit

Hmax: M a x i m u m rise

Detail X

Step width Rise Weight Support loads Transp. dimensions

A H R1 R2 R3 Balustrade height 1000

m m m m k N k N k N k N h l

Step width (mm)

A: Step width

B: Width betwee n handrai ls

C: Handra i l outer distance

D: Width of escalator

E: Width of pit

Hmax: M a x i m u m rise

Transportation dimensions

Detail Z

All dimensions in mm. Observe national regulations!Subject to changes.

Step width Rise Weight Support loads Transp. dimensions

A H R1 R2 Balustrade height 1000

m m m m k N k N k N h l

All dimensions in mm. Observe national regulations!Subject to changes.

1)If H > 8.5m, a second intermediate support may be required.Please consult Schindler.2)For H> 9.2m, a topextension of 417 mmis needed.3) Delivery in 2 parts.

Step width (mm)

A: Step width

B: Width between handrails

C: Handrail outer distance

D: Width of escalator

E: Width of pit

Hmax: Maximum rise

Transportation dimensions

Detail X

Detail Z

Step width Rise Weight Support loads Transp. dimensions

A H R1 R2 R3 R4 Balustrade height 1000

m m m m k N k N k N k N kN h l

All dimensions in mm. Observe national regulations!Subject to changes.

The stated loads are characteristic values according to EN 1990.

1) If L > Lmax., an intermediate support may be required. Please consult schindler.

2) With a double drive, the truss must be extended by 417 mm.

3) With a balustrade height of 900 mm, h is reduced by 70 mm.

4) Delivery in min. 2 parts.

.

Transportation dimensions

Detail Z

Step width (mm)

A: Step width

B: Width betweenhandrails

C: Handrail center distance

D: Width of escalator

E: Width of pit1)

Lmax. : Limiting span length

Hmax.: Maximum rise

CA: Distance between outer

faces of handrails

Step width Rise Weight Support loads Transp. dimensions

A H R1 R2 R3 Balustrade height 1000

mm mm kN kN kN kN h l

800

5,000 86 76 67 - 3,260 15,700

5,500 89 80 70 - 3,280 16,700

6,000 90 46 37 74 3,290 17,690

7,000 97 51 36 86 3,320 19,680

8,000 104 56 34 98 3,340 4)

9,000 111 62 31 101 3,360 4)

10,000 124 70 32 123 3,370 4)

1,000

5,000 90 86 76 - 2,510 15,700

5,500 95 90 80 - 2,540 16,700

6,000 95 51 42 87 2,550 17,690

7,000 103 57 40 101 3,320 19,680

8,000 111 63 38 115 3,340 4)

9,000 123 73 40 127 3,360 4)

10,000 132 79 37 143 3,370 4)

All dimensions in mm. Observe national regulations!Subject to changes.

1) With a double drive, the truss must be extended by 417mm.

2) Delivery in min. 2 parts.

Detail X

Transportation dimensions

Detail Z

Step width Rise Weight Support loads Transp. dimensions

A H R1 R2 R3 Balustrade height 1000

mm mm kN kN kN kN h l

Step width (mm)

A: Step width

B: Width between handrails

C: Handrail outer distance

D: Width of escalator

E: Width of pit

Hmax: Maximum rise

1) With a double drive, the truss must be extended by 417mm.

2) Delivery in min. 2 parts.

Transportation dimensions

Detail X

Detail Z

Step width Rise Weight Support loads Transp. dimensions

A H R1 R2 R3 Balustrade height 1000

mm mm kN kN kN kN h l

, ,

, ,

, ,

, ,

Step width (mm)

A: Step width

B: Width between handrails

C: Handrail outer distance

D: Width of escalator

E: Width of pit

Hmax: Maximum rise

All dimensions in mm. Observe national regulations!Subject to changes.

1) With a double drive, the truss must be extended by 417mm.

2) Delivery in min. 2 parts.

Detail X

Transportation dimensions

Detail Z

Step width (mm)

A: Step width

B: Width between handrails

C: Handrail outer distance

D: Width of escalator

E: Width of pit

Hmax: Maximum rise

Step width Rise Weight Support loads Transp. dimensions

A H R1 R2 R3 Balustrade height 1000

mm mm kN kN kN kN h l

All dimensions in mm. Observe national regulations!Subject to changes.

1) With a double drive, the truss must be extended by 417mm.

2) Delivery in min. 2 parts.

Step width (mm)

A: Step width

B: Width between handrails

C: Handrail outer distance

D: Width of escalator

E: Width of pit

Hmax: Maximum rise

Detail X

Transportation dimensions

Detail Z

Step width Rise Weight Support loads Transp. dimensions

A H R1 R2 R3 Balustrade height 1000

mm mm kN kN kN kN h l

All dimensions in mm. Observe national regulations!Subject to changes.

1) With a double drive, the truss must be extended by 417mm.

2) Delivery in min. 2 parts.

Detail X

Transportation dimensions

Detail Z

Step width (mm)

A: Step width

B: Width between handrails

C: Handrail outer distance

D: Width of escalator

E: Width of pit

Hmax: Maximum rise

Step width Rise Weight Support loads Transp. dimensions

A H R1 R2 R3 Balustrade height 1000

mm mm kN kN kN kN h l

Detail X

Transportation dimensions

Step width (mm)

A: Step width

B: Width between handrails

C: Handrail outer distance

D: Width of escalator

E: Width of pit

Hmax: Maximum rise

Detail ZStep width Rise Weight Support loads Transp. dimensions

A H R1 R2 R3 Balustrade height 1000

mm mm kN kN kN kN h l

All dimensions in mm. Observe national regulations!Subject to changes.

1) With a double drive, the truss must be extended by 417mm.

2) Delivery in min. 2 parts.

1) Calculated on the basis of a deection of L /750.If L > Lm a x . an intermediate support may be required; please consult Schindler. Intermediate support (R3) at a distance of L /2.

2) With a double drive, the truss must be extended by417 mm.

3) Support loads for two intermediate supports on request.

4) Dimensions for balustrade height 1,000.

5) Free spaces, overhead clearance, safety clearance; ceiling deflectors, wedging guards and protective barries according to national regulations (optional supply by Schindler).

6) Dimension for truss height 716 mm

All dimensions in mm. Observe national regulations!Subject to changes.INT = intermediatesupport(s)

Inclination Rise Length Transp. dimensions Pallet width A = 800 Pallet width A = 1000 Pallet width A = 1100

in one part Weight (kN) Supp. loads (kN) Weight (kN) Supp. loads (kN) Weight (kN) Supp. loads (kN)

H L h4) I G Gu Go R1 R2 R3 G Gu Go R1 R2 R3 G Gu Go R1 R2 R3

)

Transportation dimensions

Detail Z

Detail X Detail Y

Step width

A: Pallet width

B: Width between handrails

C: Handrail center distance

D: Moving walk width

E: Width of pit

1): Limiting span length Lmax.

Hmax.: Maximum rise

1) For outdoor installations a water drain shall be provided over the entire length of the concrete pit by costumer.

2) The support loads T1 and D1 are equally distributed over the width of the moving walk, whereas the support loads T2, D2, M1, M3 etc. are equally distributed among the supports on the left and right side.

For outdoor installations, feasibility must be checked by the supplying factory on the basis of climatic conditions.

For parallel installation the drive stations must be mounted always on the same end.

All dimensions in mm.

All loads in KN.

Observe national regulations!

Subject to changes.

Please consult Schindler.Detail A

Section C-C

Detail B

Detail D

Detail A ' /B'

Detail E

Section F-F

http://www.schindler.com/