Embed Size (px)
Citation preview
ACCESSORIES FOR THE 2010 GENO/GRINDER®
THE ULTIMATE PLANT & ANIMAL TISSUE HOMOGENIZER
CLAMPS
2189 ADJUSTABLE CLAMP Adjusts to fit various sizes of titer plates, vial sets and cryo-blocks vials by pressing the release button.
2189T NESTING TRAY SET These trays used are used to stack titer plates in the 2189 adjustable clamp. 2 trays in a set.
2199 LARGE CAPACITY CLAMP ASSEMBLY Oversized clamp that holds titer plates, vial sets and cryo-blocks.
GRINDING MEDIA
2100 GRINDING BALL DISPENSER Simultaneously dispenses one grinding ball into each well of a standard 96-well titer plate.
2110M 24 PIN MAGNET 24 magnet-tipped pins on plate with handle. Inserts or removes 3/8 in. (9.5 mm) steel grinding balls(2155) from titer plates and vial sets.
2110S SEPARATOR FOR 24-PIN MAGNET Separates grinding balls from 2110M 24-Pin magnet after they are pulled out of wells or vials.
2150 STAINLESS STEEL GRINDING BALLS 5/32 inch grinding balls made of 440C stainless steel. Suitable for grinding small tissue samples. Sold in bags of 5000.
2160 SILICA GRINDING BEADS Acid washed, silica grinding beads that are suitable for basic cell lysis. Bead size ranges from 800-1000 μm, 200 gram bottle.
2170 SILICA GRINDING RESIN Acid washed, irregular, silica grinding resin that are treated to remove fine particles and contaminates. Bead size ranges from 100-400 μm, 200 gram bottle.
2180 ZIRCONIUM GRINDING BEADS Acid washed RNase/DNase-free treated zirconium grinding beads. Bead size ranges from 200-400μm, 250 gram bottle.
2183 CERAMIC GRINDING CYLINDERS Ceramic grinding cylinders, 3/8” x 7/8” with angle-cut ends for use with standard centrifuge tubes. Sold in bags of 100.
KRYO-TECH® ACCESSORIES
2255 CRYOGENIC GRINDING VIAL PACK Used to grind tough materials, like skin & bone, at cryogenic temperatures. 4 vials sets in a package.
2600 CRYO-STATION Holding station for samples which must be kept chilled for cryogenic grinding.
2260 CRY0-BLOCK Aluminum block holds eight 2255 vials. Set includes two Cryo-Blocks, allowing 16 samples to be run simultaneously. Sold in pairs.
2650 CRYO-ADAPTER FOR TITER PLATES Extruded aluminum insert for 96-well titer plate, round wells. Sold in pairs.
2660 CRYO-BLOCK FOR POLYCARBONATE VIALS Aluminum block holds six 15 mL short polycarbonate vials. Sold in pairs.
2663 CRYO-BLOCK FOR POLYETHYLENE VIALS Aluminum block holds twenty-four 5 mL polyethylene vials. Sold in pairs.
2664 CRYO-BLOCK FOR POLYCARBONATE VIALS Aluminum block holds six 50 mL polycarbonate cryovials or six 50 mL polyethylene cryovials. Sold in pairs.
2665 CRYO-BLOCK FOR MICROCENTRIFUGE/PCR TUBES
Aluminum block holds 96 standard (0.6 mL) microcentrifuge or PCR tubes. Sold in pairs.
This is a brief list of accessories for the 2010 Geno/Grinder® to accommodate different sample types, sizes and applications. For photos, pricing and other details, visit www.spex.com or contact a distributor in your area.
W W W. S P E X S A M P L E P R E P. C O M
ACCESSORIES FOR THE 2010 GENO/GRINDER®
Corporate HeadquartersSPEX SamplePrep65 Liberty StreetMetuchen, NJ 08840, USA
Tel: 732-623-0465Fax: [email protected]
European DivisionSPEX CertiPrep Ltd2 Dalston GardensStanmore, Middlesex HA7 1BQ
Tel: +44 (0) 208-204-6656Fax: +44 (0) [email protected]
RACKS & HOLDERS
2190 VIAL RACK Holds up to twenty-four 5mL polycarbonate vials.
2196 FOAM HOLDER FOR 50 mL CENTRIFUGE TUBES Thick, rugged foam block holds 12 standard 50mL centrifuge tubes 115 mm in length.
2197 FOAM HOLDER FOR 15 mL CENTRIFUGE TUBES Thick, rugged foam block holds 24 standard 15mL centrifuge tubes 119 mm in length.
2300 FOAM HOLDER FOR 2ML TUBES Thick, rugged foam block holds 48 microfuge tubes.
TITER PLATES & CAP MATS
2200 96-WELL TITER PLATE WITH SQUARE WELLS Each square well in this deep-well titer plate has a volume of 2.4mL and a working volume of 2.0mL.Also available in packs of 100.
2201 CAP-MAT FOR 2200 TITER PLATE Silicone rubber mat specifically designed to seal wells of the 2200 96-well titer plate. Also available in packs of 10.
2210 96-WELL TITER PLATE WITH ROUND WELLS Each round well in this deep-well titer plate has a volume of 2.0mL and a working volume of 1.0mL. Also available in packs of 100.
2211 CAP-MAT FOR 2210 TITER PLATE Silicone rubber mat specifically designed to seal wells of the 2210 96-well titer plate. Also available in packs of 10.
2220 48-WELL TITER PLATE WITH RECTANGLE WELLS Each rectangular well in this deep well titer plate has a volume of 5 mL and a working volume of 2 mL. Also available in packs of 100.
2221 CAP-MAT FOR 2220 TITER PLATE Silicone rubber mat specifically designed to seal wells of the 2210 titer plates. Also available in packs of 10.
VIALS AND VIAL SETS
2240-PC PRE-CLEANED 5mL POLYCARBONATE VIAL SET
Immediately ready to use, each vial set includes 24 pre-cleaned, 5 mL polycarbonate vials loaded with one 3/8 in. (9.5 mm) Steel Grinding Ball. Sold as case of 10 vial sets.
2241-PC 5mL POLYCARBONATE VIAL WITH SCREW-ON CAP
5mL polycarbonate vial with screw-on polyethylene cap. 1/2 in. diameter x 2 in. long (12.7 mm x 50.8 mm). Sold as a bag of 240 vials.
2250 PRE-CLEANED 15mL POLYCARBONATE VIAL SET WITH GRINDING BALL
Vial Set includes five pre-cleaned, 2251-PC 15 mL short polycarbonate vials, each loaded with two 2156 7/16in. (11 mm) Steel Grinding Balls. Sold as case of 10 vial sets.
2251-PC 15mL POLYCARBONATE VIAL WITH SCREW-ON CAP
15mL short polycarbonate vial with screw-on cap. Ideal for larger samples that are too big for standard titer plates. Sold as a bag of 100 vials.
2252-PC-30 15mL POLYCARBONATE CRYOVIAL WITH SCREW-ON CAP
Able to withstand liquid nitrogen temperatures. Each cryovial has a volume of 15 mL and a working volume of 6 mL. Sold as a bag of 30 Cryovials.
2301-100MB
2mL TUBE WITH 100 ΜM MOLECULAR BIOLOGY GRADE SILICA BEADS
Self-standing 2 mL microfuge tube with screw-cap, pre-filled with 100 μm molecular biology grade silica beads. Sold in bags of 100.
2303-MM1 PRE-FILLED 2mL TUBES Self-standing 2 mL microfuge tube with screw-cap, pre-filled with 500 μm garnet and a 6 mm zirconium grinding satellite. Sold in bags of 100.
3116PC POLYCARBONATE VIAL WITH SLIP-ON CAP 5mL polycarbonate vial with slip-on polyethylene cap. 1/2 in. diameter x 2 in. long (12.7 mm x 50.8 mm). Ideal for pulverizing soft, brittle materials and for mixing liquids and powders. Sold as a bag of 100 vials.
GRINDINGMEDIA
TITER PLATESVIALS &
VIAL SETS
CLAMPSCRYO-BLOCKS
CRYO-STATION
FOAM HOLDER
