Plant Engineering & Geomatic Services Pvt Ltd

Address Information

PEGS Pvt. Ltd.

Elcome House,

A-06, Sec-34, Gurgaon – 122002,

Haryana Phone: +91-124-4763302

Mail: gourango.singha@pegs.co.in

Web: www.pegs.co.in

Services Rendered by PEGS

Laser scanning

Grid measurements Tie in Surveys

Installation control

Prefab control

3D laser scan modeling Field survey reports

Clash testing

Important Personnel

Ajay Seth Managing Director

Aneesh Seth Business Development Manager

Gourango Singha Operations/Project Manager

Amit Rohilla OPC Coordinator

Pravesh Kumar CATS/resource planning/logistics

Amit Kumar Cost control - Responsible

Vivek Singh 3D CAD operator

CH Praveena Senior 3D CAD operator

Jagdish Suthar 3D CAD Operator

Pankaj Kumar Senior survey Engineer (structure)

Shubham IT Administrator

Plant Engineering and Geomatic Services (PEGS) is a part of Elcome Group of Companies. PEGS is the

first company in India to provide laser scanning services to its client in India and abroad. In the past

few years PEGS have executed more than 70 projects in India and countries like Belgium, Cambodia,

Egypt, Malaysia, Morocco, UK, USA etc. Some of the key clients of PEGS are Larsen & Toubro Ltd, L&T Integrated Engineering Services, Ultramar Ltd, Ranhill Worley, British Gas, British Petroleum, Konkan

Railways, Wipro Ltd etc.

PEGS has established a state-of-the art 3D modeling center at Gurgaon in the National Capital Region. We specialize in capturing 3D digital data with the help of time-of-flight & phase based scanners. Apart

from laser scanning PEGS also conducts GPS/DGPS & Gyro surveys for various industry segments. We

have a dedicated team for carrying out laser scanning in the field and post processing the data into different formats as per the client need.

Software Expertise:

Industry Segments:

Refinery Offshore Heritage Ship Building

Tunnels Hydro Power Building Bridges

Mining Forensic Aero Space Highways

Service – Plant Engineering

Cyclone 3D Model PDMS Model Rendered Model

Clash Check Tie-In Reports As-Built Drawing

Services – Civil Engineering

DTM Model Contour Map Volume Calculation

Tunnel Profile

Our Engineers has undergone BOSEIT and EBS training from OPITO approved training institute and

most of them hold a Shell Safety & Health passport and can fly to offshore any time in any country.

In-house Equipments

Leica HDS 6200 Riegl LMS Z-420i Leica SmartStation

Leica Laser Tracker Leica GPS System 1200 Leica DISTO

Key Projects Executed by PEGS in the past

Plant Engineering

� 3D Laser Scanning of Maroc Phosphor Plant, Casablanca, Morocco

Client: Uhde India Ltd, Pune

� 3D Laser Scanning of P&G’s Plant at London, UK

Client: Larsen & Toubro Ltd, Vadodara

� 3D Laser Scanning of P&G’s Plant at Cairo, Egypt

Client: Larsen & Toubro Ltd, Vadodara

� 3D Laser Scanning of P&G’s Plant at Brussels, Belgium

Client: Larsen & Toubro Ltd, Vadodara

� 3D Laser Scanning of P&G.s Plant at Baddi, Himachal Pradesh

Client: Larsen & Toubro Ltd, Vadodara

� 3D Laser Scanning of P&G’s Plant at Mandideep, Madhya Pradesh Client: Larsen & Toubro Ltd, Vadodara

� 3D Laser Scanning of GM’s Saginaw Metal Casting Plant

Client: General Motors, Detroit, Michigan

� “As-Built” Studies of HS, HR & NLM Offshore Oil Platforms Client: Larsen & Toubro India Ltd, Mumbai.

� Clash Detection and Checking Installation Fit-ups for Compressor of Banduq Offshore Oil Platform

Client: Larsen & Toubro India Limited, Hazira, Gujarat

� Scanning of RAP5 & RAP6 at Rajasthan Atomic Power Station

Client: Nuclear Power Corporation of India Ltd, Mumbai

� “Clash Detection” & Checking Installation Fit-ups at Tapti Offshore Oil Platform

Client: British Gas & Exploration Pvt Ltd, Mumbai

� Scanning of Heat Exchangers to Check Installation Fit-ups for

Client: Fluor Canada Ltd & Ultramar Ltd, Canada

� Scanning of Tie-In points for clash checking and PDMS model upgrade for Shell, at Miri, Malaysia

Client: Ranhill Worley, Malaysia

� Scanning & 3D modeling of Procter & Gamble’s London Plant,

Client: Larsen & Toubro, India, Procter & Gamble, London, UK

� 3D Modeling of Golarchi, Tangri & Bukhari Oil facilities

Client: British Petroleum, Pakistan

Heritage

� 3D Laser Scanning survey of Stone Chariot & Varaha Temple at Hampi, Karnataka Client: KSCST, Bangalore

� 3D Laser Scanning of Chausanth Khamba, New Delhi

Client: Aga Khan Trust, New Delhi

� ”As-Built” survey of Ta Prohm Temple Complex in Siem Reap, Cambodia

Client: Archaeological Survey of India, Cambodia

� “As-Built” survey of Ajanta Caves for Geological Investigations

Client: Geological Survey of India and Archaeological Survey of India, New Delhi

� “As-Built” studies of Fatehpur Sikri

Client: Archaeological Survey of India, New Delhi

� “As-Built” studies of Qutab Minar

Client: Archaeological Survey of India, New Delhi

Civil Survey

� Topographic Studies of Anjikhad River Site for construction of Railway Bridge connecting Reasi and Katra

Client: Gammon India Ltd, Mumbai

� Topographic Studies of Runchu Dam Site and Power House at Teesta IV, Sikkim

Client: National Hydroelectric Power Corporation, Faridabad

� Topographic Survey of Goutham Khani Open Cast Mine, Client: Singareni Collieries Company Ltd, Khammam, Hyderabad

� Topographic Survey of Umred Open Cast Coal Mine

Client: Western Coal Fields Limited, Nagpur

� As-Built survey of T1 Tunnel at Udhampur, Udhampur, J&K.

Client: RITES Ltd, Gurgaon, Haryana

� Topographic Survey of 1050 Sq Km Area by Riegl 3D Laser Scanner at Indore, MP

Client: N.K.Buildcon

� Analysis of Dump failure by 3D Laser Scanning at Singrauli, MP

Client: Northern Coalfields Limited

� Establishing GPS Pillars at Kotputli for Six Lane Road construction on Delhi-Jaipur Highway

Client: Vishwa Surveying

� Establishing GPS Pillars for Topographic Survey of Hydro project Survey at Lachung, Sikkim.

Client: Lachung Hydro Power Pvt Ltd.

� Establishing GPS Pillars for Topographic Survey of Khardungla Pass at Khardungla Top, Leh

Client: Snow & Avalanche Studies Establishment, Chandigarh.

� Establishing GPS Pillars at Udhampur,J&K.

Client: RITES Ltd, Gurgaon, Haryana

Reverse Engineering projects

� Scanning of MIG -21 Aircraft for developing 2D as-built drawings and developing a 3D model for

performing CFD (Computer Fluid Dynamic test)

Client: Indian Airforce

3D Modeling Services PEGS has established a state-of-the art technology center for 3D modeling works with high end workstations and

dedicated server. All the employees are trained on software’s like Leica, Cyclone, AutoCad, Civil 3D etc to provide

deliverable in different formats. PEGS has executed several point cloud processing contracts with companies in

USA, Europe and other countries.

Sample Images from Past Projects:

FMCG

Automotive

Chemical

Offshore

Global Partner of PEGS